Search

Developing highly efficient and stable electrocatalysts for urea electro-oxidation reactions (UORs) will improve wastewater treatment and energy conversion. A low-cost cobalt sulfide-anchored nickel sulfide electrode (CoS/Ni3S2@CP) was synthesized by electrodeposition in DMSO solutions and found to be highly effective and long-lasting. The morphology and composition of catalyst surfaces were examined using comprehensive physicochemical and electrochemical characterization. Specifically, CoS/Ni3S2@CP electrodes require a potential of 1.52 volts for a 50 mA/cm2 current, confirming CoS in the heterointerface CoS/Ni3S2@CP catalyst. Further, the optimized CoS/Ni3S2@CP catalyst shows a decrease of 100 mV in the onset potential (1.32 VRHE) for UORs compared to bare Ni3S2@CP catalysts (1.42 VRHE), demonstrating much greater performance of UORs. As compared to Ni3S2@CP, CoS/Ni3S2@CP exhibits twofold greater UOR efficiency as a result of a larger electroactive surface area. The results obtained indicate that the synthetic CoS/Ni3S2@CP catalyst may be a favorable electrode material for managing urea-rich wastewater and generating H2. [ABSTRACT FROM AUTHOR]

The Special Issue "Exclusive Papers of the Editorial Board Members and Topical Advisory Panel Members of Catalysts in Section "Catalytic Materials" contains 14 peer-reviewed research articles and 1 review paper. The articles focus on the field of homogeneous and heterogeneous catalysis, with an emphasis on synthesis, physico-chemical characterizations, and applications in environmental protection reactions. The studies provide detailed explanations of reactions in gas and liquid phases using different types of reactors and analyze reaction products using various techniques. The research papers also describe the synthesis and characterization of different types of catalytic materials, contributing to interdisciplinary knowledge in the field. The issue highlights ongoing efforts to develop more efficient and versatile catalysts for industrial and environmental applications. [Extracted from the article]

This document is a summary of a special issue of the journal Catalysts, which focuses on recent advances in the field of photocatalysis. The issue includes seven exclusive papers written by members of the editorial board and topical advisory panel. The papers cover a range of topics, including the use of gadolinium-doped bismuth ferrite for the photocatalytic oxidation of arsenite, the effect of heterovalent doping on the photoelectrochemical behavior of anatase TiO2, the synthesis of novel ternary composites for photocatalytic degradation, the preparation of metallic MoS2/WS2 dual co-catalysts for hydrogen production, the development of a photocatalyst for removing bisphenol A from water, the synthesis of Au/TiO2/WO3 heterostructures for photodegradation and dye sensing, and the design of furane-based photoinitiators for polymerization. The authors conclude that there is still much research to be done in the field of photocatalysis, particularly in terms of the type of light irradiation, substrate immobilization, and the search for new photocatalysts. [Extracted from the article]

Fibers represent a type of structure of great interest in catalysis since they combine high area to volume ratio and can be fabricated from many types of materials, such as ceramic oxides, polymers, and alloys. They can be used in isolated form or structured, as in the case of the ceramic papers synthesized in this work, following a modified papermaking technique. The addition of cationic and anionic polyelectrolytes improved the retention of ceramic fibers during the ceramic paper formation stage by adsorption processes, through the formation of floccules. In the complex aqueous system containing charged macromolecules, the amounts of polyelectrolytes to be added were determined by titrations. To enhance mechanical properties of ceramic papers, different classes of nanoparticle suspensions can be used as binders. As a novel alternative, we have used different borate-type compounds. Among them, we selected natural ulexite, which was purified and used as a binder of ceramic fibers. In order to improve mechanical resistance and flexibility, measured from tensile indexes and elastic module, the amounts of NaCaB5O6(OH)6.5H2O and the calcination temperature were varied. In this contribution, to take advantage of the unique characteristics of the ulexite-containing ceramic papers, they were impregnated with Co,Ce and Co,Ba,K and tested for diesel soot combustion. [ABSTRACT FROM AUTHOR]

Diesel soot particles are of concern for both the environment and health. To catalytically remove them, it is important to know their structure and composition. There is little described in the literature on how catalysts favor the combustion of different soot fractions. In this work, programmed temperature oxidation (TPO) experiments were carried out using Co,Ce or Co,Ba,K catalysts supported on ceramic papers. Soot particles were obtained by burning diesel fuel in a vessel (LabSoot) or by filtering exhaust gases from a turbo diesel engine in a DPF filter (BenchSoot), and compared with a commercial diesel soot: Printex U. Various characterization techniques were useful to relate the characteristics of both the soot particles and the catalysts with the TPO results. The maximum catalytic soot burn rate (TM) temperatures were in the range of diesel exhaust temperatures that would facilitate in-situ regeneration of the DPF. The Co,Ba,K catalyst showed a higher catalytic effect in LabSoot, as the latter exhibited the largest primary particles and the higher order of graphene layers, for which the potassium-containing catalyst improves the contact between soot and catalyst and favors the combustion of soot, while the Co,Ce catalyst preferentially enhanced the combustion of commercial soot by supplying active oxygen. [ABSTRACT FROM AUTHOR]

Microbial xylanase has wide application in bioenergy, animal feed, environmental protection, the pulp and paper industry, and agricultural development. In this study, three xylanases from the microbiota of T. fuciformis with its companion strains were identified by metagenomics sequencing. The three enzymes were subjected to cloning and expression in E. coli or P. pastoris, purification, and characterization for their properties. The results showed that AsXyn1, from Annulohypoxylon stygium, among the three enzymes possessed high thermostability at 40 °C and broad pH tolerance in the range of 2.0–10.0, exhibiting its application potential. Furthermore, it was found that post-translational modification (such as glycosylation) of AsXyn1 enzyme modulated its activity, kinetic parameters, and thermostability. These results and findings provided a hint for enzyme modification and design in future. [ABSTRACT FROM AUTHOR]

This document is an exclusive review of catalytic materials and their applications in various fields. It includes reviews on topics such as enzyme-nanoparticle immobilization for biocatalysis, the catalytic activity of gold enzymes, nickel single-atom catalysts for hydrogenation and dehydrogenation reactions, heterogeneous catalysts for oxime hydrogenation, advanced oxidation processes for water and air purification, and selective catalytic reduction technology for reducing NOx emissions from diesel engines. The reviews provide insights into the synthesis, structure, and application of different catalytic materials, highlighting their potential in solving technological challenges in sensing, catalysis, and biomedicine. [Extracted from the article]

This document provides an overview of a special issue published in the Organic and Polymer Chemistry section of the journal Catalysts. The issue includes contributions from 18 members of the journal's Editorial Board and covers a wide range of topics in the fields of homogeneous catalysis, organometallic chemistry, and polymer chemistry. The special issue consists of three review articles and four scientific papers, covering subjects such as gold chemistry, transition metal phosphide nanoparticle catalysts, and cobalt complexes. The document also mentions the importance of communication and academic exchanges among researchers in the field of chemistry. [Extracted from the article]

Endo-1,4-β-xylanases belonging to the glycoside hydrolase (GH) 11 family hydrolyze the β-1,4-glycosidic linkages in the xylan backbone to convert polymeric xylan into xylooligosaccharides. GH11 xylanases play an essential role in sugar metabolism and are one of the most widely used enzymes in various industries, such as pulp and paper, food and feed, biorefinery, textile, and pharmaceutical industries. pH is a crucial factor influencing the biochemical properties of GH11 xylanase and its application in bioprocessing. For the optimal pH shifting of GH11 xylanase in industrial applications, various protein engineering studies using directed evolution, rational engineering, and in silico approaches have been adopted. Here, we review the functions, structures, and engineering methods developed for the optimal pH shifting of GH11 xylanases. The various GH11 engineering techniques and key residues involved in pH shifting are discussed based on their crystal and modeled structure. This review provides an overview of recent advancements in the characterization and engineering of GH11 xylanases, providing a guide for future research in this field. [ABSTRACT FROM AUTHOR]

In this study, a highly efficient carbon-supported Pd catalyst for the direct ethanol fuel cell was developed by electrodepositing nanostructured Pd on oxygen plasma-treated carbon fiber paper (Pd/pCFP). The oxygen plasma treatment has been shown to effectively remove the surface organic contaminants and add oxygen species onto the CFP to facilitate the deposition of nano-structured Pd on the surface of carbon fibers. Under the optimized and controllable electrodeposition method, nanostructured Pd of ~10 nm can be easily and evenly deposited onto the CFP. The prepared Pd/pCFP electrode exhibited an extraordinarily high electrocatalytic activity towards ethanol oxidation, with a current density of 222.8 mA mg−1 Pd. Interestingly, the electrode also exhibited a high tolerance to poisoning species and long-term stability, with a high ratio of the forward anodic peak current density to the backward anodic peak current density. These results suggest that the Pd/pCFP catalyst may be a promising anodic material for the development of highly efficient direct alcohol fuel cells. [ABSTRACT FROM AUTHOR]

Those catalysts are engineered for conventional thermal oxidation catalysis but also sequential adsorption-catalytic, photocatalytic, and plasma-catalytic oxidation processes. This Special Issue collects three reviews, eight articles, and two communications related to the design of catalysts for environmental applications, such as the transformation of several pollutants into harmless or valuable products. The authors showed that the addition of Au improved the activity of the Al SB 2 sb O SB 3 sb -supported Cu and Pt catalysts and had a positive effect on SO SB 2 sb production by widening its production window, especially for the platinum-based catalyst. [Extracted from the article]

Electrooxidation of urea plays a substantial role in the elimination of urea-containing wastewater and industrial urea. Here, we report the electrodeposition of nickel hydroxide catalyst on commercial carbon paper (CP) electrodes from dimethyl sulphoxide solvent (Ni(OH)2-DMSO/CP) for urea electrooxidation under alkaline conditions. The physicochemical features of Ni(OH)2-DMSO/CP catalysts using scanning electron microscopy and X-ray photoelectron spectroscopy revealed that the Ni(OH)2-DMSO/CP catalyst shows nanoparticle features, with loading of <1 wt%. The cyclic voltammetry and electrochemical impedance spectroscopy revealed that the Ni(OH)2-DMSO/CP electrode has a urea oxidation onset potential of 0.33 V vs. Ag/AgCl and superior electrocatalytic performance, which is a more than 2-fold higher activity in comparison with the counterpart Ni(OH)2 catalyst prepared from the aqueous electrolyte. As expected, the enhancement in electrocatalytic activity towards urea was associated with the superficial enrichment in the electrochemically active surface area of the Ni(OH)2-DMSO/CP electrodes. The results might be a promising way to activate commercial carbon paper with efficient transition metal electrocatalysts, for urea electrooxidation uses in sustainable energy systems, and for relieving water contamination. [ABSTRACT FROM AUTHOR]

The demand for biomass utilization is increasing because of the depletion of fossil resources that are non-renewable in nature. Lignin is the second most renewable organic carbon source, but currently it has limited scope for application in the chemical and fuel industries. Lignin is a side product of the paper and pulp, sugar, and 2G bioethanol industries. Many research groups are working on the value-addition of lignin. Among the lignin depolymerization methods, catalytic hydropyrolysis is gaining attention and is playing a crucial role in developing biorefinery. The hydropyrolysis of lignin was conducted at a higher temperature in the presence of H2. The hydropyrolysis of lignin results in the selective formation of non-oxygenated cyclic hydrocarbons in a shorter reaction time. It is possible to use the cyclic hydrocarbons directly as a fuel or they can be blended with conventional gasoline. This review focuses on the prior art of pyrolysis and hydropyrolysis of lignin. Possible products of lignin hydropyrolysis and suitable synthetic routes to obtain non-oxygenated cyclic hydrocarbons are also discussed. The influence of various process parameters, such as type of reactor, metal catalyst, nature of catalytic supports, reaction temperature, and H2 pressure are discussed with regard to the hydropyrolysis of lignin to achieve good selectivity of cyclic hydrocarbons. [ABSTRACT FROM AUTHOR]

Non-noble-metal-based chalcogenides are promising candidates for hydrogen evolution reaction (HER) by harnessing the architectural design and the synergistic effect between the elements. Herein, a porous bimetallic selenide (NiFeSe) nanocube deposited on carbon fiber paper (NiFeSe/CFP) was synthesized through a facile selenization reaction based on Prussian blue analogues (PBAs) as precursors. The NiFeSe/CFP exhibited excellent HER activity with an overpotential of just 186 mV for a current density of 10 mA cm−2 in 1.0 M KOH at ambient temperature, similar to most of the state-of-the-art transition metal chalcogenides. The corresponding Tafel slope was calculated to be 52 mV dec−1, indicating fast discharge of the proton during the HER. Furthermore, the catalyst could endure long-term catalytic tests and showed remarkable durability. The enhanced electrocatalytic performance of NiFeSe/CFP is attributed to the unique 3D porous configuration inherited from the PBA templates, enhanced charge transfer occurring at the heterogeneous interface due to the synergistic effect between the bimetallic phases, and the high conductivity improved by the formation of amorphous carbon shells during the selenization. These findings prove that the combination of inexpensive metal–organic framework precursors and hybrid metallic compounds is a feasible way to realize the performance enhancement of non-noble-metal-based chalcogenides towards alkaline HER. [ABSTRACT FROM AUTHOR]

We report herein the preparation and characterization of six readily assembled bis-coordinated homoleptic silver(I) N,N′-bis(arylimino)acenaphthene (BIAN) complexes of general structure [Ag(I)(BIAN)2]BF4 and the influence of the electronic properties of the ligand substitution pattern on their performance in electrochemical CO2 reduction (CO2R). All the explored catalysts displayed substantial current enhancements in carbon-dioxide-saturated solvents dependent on the ligated BIAN and no significant concurrent H2 evolution when utilizing 2% H2O as a proton source. Additionally, preliminary studies, employing a drop-casted ink of 0.4 mg cm−2 [Ag(I)(4-OMe-BIAN)2]BF4 (Ag4) immobilized onto carbon paper gas diffusion electrodes in a flow cell with 1M KHCO3 aqueous electrolyte, resulted in a propitious Faradaic efficiency of 51% for CO at a current density of 50 mA cm−2. [ABSTRACT FROM AUTHOR]

The document "Microporous and Mesoporous Materials for Catalytic Applications" published in the journal "Catalysts" presents twelve peer-reviewed articles focusing on the synthesis and physico-chemical characterizations of structured acidic and metal-modified microporous and mesoporous materials. These materials have been utilized in various applications such as fuel production, pharmaceuticals, and fine chemicals. The research papers explore important reactions like methanol to aromatics, hydrodesulfurization, and catalytic distillation, contributing to the development of green process technology and environmentally friendly industrial processes. The document highlights novel synthesis methods and in-depth characterizations of these catalytic materials, providing valuable insights for academic and industrial researchers. [Extracted from the article]

The interest in advanced photocatalytic technologies with metal oxide-based nanomaterials has been growing exponentially over the years due to their green and sustainable characteristics. Photocatalysis has been employed in several applications ranging from the degradation of pollutants to water splitting, CO2 and N2 reductions, and microorganism inactivation. However, to maintain its eco-friendly aspect, new solutions must be identified to ensure sustainability. One alternative is creating an enhanced photocatalytic paper by introducing cellulose-based materials to the process. Paper can participate as a substrate for the metal oxides, but it can also form composites or membranes, and it adds a valuable contribution as it is environmentally friendly, low-cost, flexible, recyclable, lightweight, and earth abundant. In term of photocatalysts, the use of metal oxides is widely spread, mostly since these materials display enhanced photocatalytic activities, allied to their chemical stability, non-toxicity, and earth abundance, despite being inexpensive and compatible with low-cost wet-chemical synthesis routes. This manuscript extensively reviews the recent developments of using photocatalytic papers with nanostructured metal oxides for environmental remediation. It focuses on titanium dioxide (TiO2) and zinc oxide (ZnO) in the form of nanostructures or thin films. It discusses the main characteristics of metal oxides and correlates them to their photocatalytic activity. The role of cellulose-based materials on the systems' photocatalytic performance is extensively discussed, and the future perspective for photocatalytic papers is highlighted. [ABSTRACT FROM AUTHOR]

This study focuses on the efficacy of silver nitrate (AgNO3) as a coating agent used to preserve papers against microbial deterioration. To this end, the in vitro cytotoxicity of AgNO3 was assessed against two normal cell lines, WI-38 and HFB-4, to detect a safe dose that can be used as a coating agent, which was 80 µg mL−1. Bacillus subtilis B3 and Penicillium chrysogenum F9 were selected as high deteriorating microbes, previously isolated from a historical manuscript dating back to 1677 A.-D. The microbial growth inhibition, color change, mechanical properties, and cellulosic fibers of untreated/treated papers were evaluated. The data showed the efficacy of AgNO3 to inhibit the growth of B. subtilis with a percentage of 100% after 7 days, while it inhibits the growth of P. chrysogenum with a percentage of 85.9 ± 1.1% after 21 days. The color and mechanical properties of treated paper in the presence/absence of microbial inoculation were slightly changed, although they changed greatly due to microbial growth in the absence of AgNO3. The EDX analysis confirmed the successful adsorption of Ag-ion on papers, with a weight percentage of 1.9%. The cellulosic fibers of untreated paper in the presence of microbial growth were highly deteriorated as compared with treated and standard filter paper (shown by FT-IR and SEM). [ABSTRACT FROM AUTHOR]

An introduction is presented in which the editor discusses various reports within the issue on topics including catalyst synthesis, reaction kinetics modeling on catalysts, and oxidation catalysis.

Paper sludge is an attractive biomass feedstock for bioconversion to ethanol due to its low cost and the lack of pretreatment required for its bioprocessing. This study assessed the use of a recombinant cellulase cocktail (mono-components: S. cerevisiae-derived PcBGL1B (BGL), TeCel7A (CBHI), ClCel6A (CBHII) and TrCel5A (EGII) mono-component cellulase enzymes) for the efficient saccharification of softwood-derived paper sludge to produce fermentable sugars. The paper sludge mainly contained 74.3% moisture and 89.7% (per dry mass (DM)) glucan with a crystallinity index of 91.5%. The optimal protein ratio for paper sludge hydrolysis was observed at 9.4: 30.2: 30.2: 30.2% for BGL: CBHI: CBHII: EGII. At a protein loading of 7.5 mg/g DW paper sludge, the yield from hydrolysis was approximately 80%, based on glucan, with scanning electron microscopy micrographs indicating a significant alteration in the microfibril size (length reduced from ≥ 2 mm to 93 µm) of the paper sludge. The paper sludge hydrolysis potential of the Opt CelMix (formulated cellulase cocktail) was similar to the commercial Cellic CTec2® and Celluclast® 1.5 L cellulase preparations and better than Viscozyme® L. Low enzyme loadings (15 mg/g paper sludge) of the Opt CelMix and solid loadings ranging between 1 to 10% (w/v) rendered over 80% glucan conversion. The high glucose yields attained on the paper sludge by the low enzyme loading of the Opt CelMix demonstrated the value of enzyme cocktail optimisation on specific substrates for efficient cellulose conversion to fermentable sugars. [ABSTRACT FROM AUTHOR]

Recalcitrant compounds resulting from anthropogenic activity are a significant environmental challenge, necessitating the development of advanced oxidation processes (AOPs) for effective remediation. This study explores the synthesis of cuprous oxide nanoparticles on cellulose-based paper (Cu2O@CBP) using Eucalyptus globulus leaf extracts, leveraging green synthesis techniques. The scanning electron microscopy (SEM) analysis found the average particle size 64.90 ± 16.76 nm, X-ray diffraction (XRD) and Raman spectroscopy confirm the Cu2O structure in nanoparticles; Fourier-transform infrared spectroscopy (FTIR) suggests the reducing role of phenolic compounds; and ultraviolet–visible diffuse reflectance spectroscopy (UV-Vis DRS) allowed us to determine the band gap (2.73 eV), the energies of the valence band (2.19 eV), and the conduction band (−0.54 eV) of Cu2O@CBP. The synthesized Cu2O catalysts demonstrated efficient degradation of methylene blue (MB) used as a model as recalcitrant compounds under LED-driven visible light photocatalysis and heterogeneous Fenton-like reactions with hydrogen peroxide (H2O2) using the degradation percentage and the first-order apparent degradation rate constant (kapp). The degradation efficiency of MB was pH-dependent, with neutral pH favoring photocatalysis (kapp = 0.00718 min−1) due to enhanced hydroxyl (·OH) and superoxide radical (O2·−) production, while acidic pH conditions improved Fenton-like reaction efficiency (kapp = 0.00812 min−1) via ·OH. The reusability of the photocatalysts was also evaluated, showing a decline in performance for Fenton-like reactions at acidic pH about 22.76% after five cycles, while for photocatalysis at neutral pH decline about 11.44% after five cycles. This research provides valuable insights into the catalytic mechanisms and supports the potential of eco-friendly Cu2O nanoparticles for sustainable wastewater treatment applications. [ABSTRACT FROM AUTHOR]

The presence of microplastics (MPs) in the environment is becoming a problem for soils and seas, as well as for the food chain of animals and humans. The scientific community has been called upon to contribute to solving the problem and several papers have been published, especially in the last decade. The aim of this work is to carry out a bibliometric analysis of the scientific literature dedicated to the problem of MPs, highlighting its course over the years, and to identify the sectors to which the research could be profitably addressed. The VOSviewer software has been used to perform the analysis of the data in which specific maps were used to represent the network of the relationships among countries, journals, organizations, authors, and keywords related to the investigated topic and subtopics. The results of the survey demonstrated that during the investigated range of time, most attention has been paid to the individuation of the MPs, and to marine pollution, while a gap seems to exist in the possible advanced oxidation processes specifically addressing the degradation of MPs and their derivates. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue of the journal Catalysts, which focuses on the research and discoveries in gold, silver, and copper catalysis. The issue features a diverse collection of research papers that highlight the versatility and effectiveness of these metallic catalysts in various catalytic processes. The papers cover topics such as the design of new catalysts, the development of advanced photocatalysts, the use of bimetallic catalysts, the influence of shape effects on catalytic performance, and the catalytic degradation of pollutants. The papers collectively contribute to the advancement of catalysis science and provide valuable insights for researchers and practitioners in the field. [Extracted from the article]

Carbonyl sulfide (COS), an organosulfur compound commonly present in industrial gases, poses significant challenges for environmental protection and industrial processes due to its toxicity. This paper reviews recent advancements in the development of catalysts for COS hydrolysis, emphasizing the effects of various supports and active components on catalyst performance, as well as the mechanisms underlying the hydrolysis reaction. Traditional supports like γ-Al2O3 demonstrate high activity for COS hydrolysis but are susceptible to deactivation. In contrast, novel supports such as activated carbon, TiO2, and ZrO2 have garnered attention for their unique structures and properties. The incorporation of active components, including alkali metals, alkaline earth metals, transition metals, and rare earth metals, significantly enhances the hydrolysis efficiency and resistance to deactivation of the catalysts. Additionally, this paper outlines three primary mechanisms for COS hydrolysis: the alkali-catalyzed mechanism, the Langmuir–Hinshelwood model, and the Eley–Rideal model mechanism, as well as the thiocarbonate intermediate mechanism, which collectively elucidate the conversion of COS into the H2S and CO2 catalyzed by these systems. Future research efforts will concentrate on developing high-activity, high-stability, and cost-effective COS hydrolysis catalysts, along with a more in-depth exploration of the reaction mechanisms to facilitate the efficient removal of COS from industrial emissions. [ABSTRACT FROM AUTHOR]

Sintering flue gas contains significant amounts of harmful gases, such as carbon monoxide and nitrogen oxides (NOx), which pose severe threats to the ecological environment and human health. Selective catalytic reduction (SCR) technology is widely employed for the removal of nitrogen oxides, with copper-cerium-based bimetallic catalysts and their derivatives demonstrating excellent catalytic efficiency in SCR reactions, primarily due to the significant synergistic effect between copper and cerium. This paper summarizes the main factors affecting the catalytic performance of Cu-Ce-based bimetallic catalysts and their derivatives in the selective catalytic reduction of ammonia and carbon monoxide. Key considerations include various preparation methods, doping of active components, and the effects of loading catalysts on different supports. This paper also analyzes the influence of surface oxygen vacancies, redox capacity, acidity, and specific surface area on catalytic performance. Additionally, the anti-poisoning performance and reaction mechanisms of the catalysts are discussed. Finally, the paper proposes strategies for designing high-activity and high-stability catalysts, considering the development prospects and challenges of Cu-Ce-based bimetallic catalysts and their derivatives, with the aim of providing theoretical guidance for optimizing Cu-Ce-based catalysts and promoting their industrial applications. [ABSTRACT FROM AUTHOR]

China is a significant global producer and consumer of pesticides and antibiotics, with their excessive use leading to substantial water pollution that poses challenges for subsequent treatment. Photocatalytic degradation, leveraging renewable solar energy, presents an effective approach for decomposing organic pollutants and reducing residual contaminant levels in water bodies. This approach represents one effective way for addressing environmental challenges. This paper classifies representative photocatalytic materials by structural design and degradation principles including MOFs (Metal–Organic Frameworks), metal- and nonmetal-doped, mesoporous material-loaded, carbon quantum dot-modified, floatation-based, and heterojunction photocatalysts. We also discuss research on degradation pathways and reaction mechanisms for antibiotics. Of particular importance are several key factors influencing degradation efficiency, which are summarized within this work. These include the separation and charge transfer rate of catalyst surface carriers, and the wide-spectrum response capabilities of photocatalysts, as well as persulfate activation efficiency. Furthermore, emphasis is placed on the significant role played by intrinsic driving forces such as built-in electric fields within catalytic systems. Moreover, this paper introduces several promising composite-structure photocatalytic technologies from both composite-structure perspectives (e.g., Aerogel-based composites) and composite-method perspectives (e.g., the molecularly imprinted synthesis method). We also discuss their latest development status, along with future prospects, presenting valuable insights for pollutant degradation targets. This work aims to facilitate the design of efficient photocatalytic materials, while providing valuable theoretical references for environmental governance technologies. [ABSTRACT FROM AUTHOR]

Photocatalysis can reduce CO2 to available energy by means of light energy, which is considered to be an effective solution to alleviate energy and environmental problems. In this paper, an MPS@Bi2WO6 composite photocatalyst was prepared by in situ hydrothermal method. BWO grew on the surface of MPS, which increased the CO2 absorption capacity of the photocatalyst and improved the microstructure. Under the synergistic effect of the two aspects, BWS achieves the enhancement of light energy absorption capacity and can effectively excite electron-hole pairs. The transition electrons with high reduction ability migrate to the surface and contact with high concentrations of CO2, achieving efficient CO2 reduction under visible light. Among the photocatalysts in this paper, BWS-1 (BWO: MPS = 1:1) has efficient CO2 gas phase reduction ability under visible light, and the CO yield reaches 29.51 μmol/g. The MPS@BWO photocatalyst is a low-cost and efficient CO2 photoreduction catalyst with broad application prospects. [ABSTRACT FROM AUTHOR]

This document discusses the importance of catalysis in chemical production and highlights the extensive research conducted in this field. It covers various aspects of catalysis, including different research fields, specific catalysts, countries, companies, and collaborations. The document also pays tribute to Professor Jiro Tsuji, a renowned scientist in the field of organic chemistry and catalysis, who made significant contributions to the development and application of transition metal-catalyzed reactions. The special issue of Catalysts is dedicated to Professor Tsuji and includes papers on various topics related to catalysis, including green methods, photocatalysis, and electrochemistry. The document concludes by acknowledging the valuable contributions of the authors and expressing gratitude to the editorial team. [Extracted from the article]

Enzyme immobilization on different supports has emerged as an efficient and cost-effective tool to improve their stability and reuse capacity. This work aimed to produce a stable immobilized multienzymatic system of xylanase and filter paper-ase (FPase) onto magnetic chitosan using genipin as a cross-linking agent and to evaluate its biochemical properties and reuse capacity. A mixture of chitosan magnetic nanoparticles, xylanase, and FPase was covalently bonded using genipin. Immobilization yield and efficiency were quantified. The activity of free and immobilized enzymes was quantified at different values of pH, temperature, substrate concentration (Km and Vmax), and reuse cycles. The immobilization yield, immobilization efficiency, and activity recovery were 145.3% ± 3.06%, 14.8% ± 0.81%, and 21.5% ± 0.72%, respectively, measured as the total hydrolytic activity. Immobilization confers resistance to acidic/basic conditions and thermal stability compared to the free form. Immobilization improved 3.5-fold and 78-fold the catalytic efficiency (Kcat/Km) of the xylanase and filter paper-ase activities, while immobilized xylanase and FPase could be reused for 34 min and 43 min, respectively. Cross-linking significantly improved the biochemical properties of immobilized enzymes, combined with their simplicity of reuse due to the paramagnetic property of the support. Multienzyme immobilization technology is an important issue for industrial applications. [ABSTRACT FROM AUTHOR]

Direct liquid fuel cells are very appealing alternatives for fighting climate change, particularly in the field of personal mobility solutions. This is especially true for direct methanol fuel cells (DMFCs) that use and burn safe fuels that are readily available from sustainable sources using well-established C1 chemistry. However, DMFCs also have some serious competitive disadvantages, like the high cost of the noble metal catalysts, the difficulties of the catalyst application, and the poisoning of the catalyst due to carbon monoxide formation. Here we demonstrate that depositing platinum on TiO2 by atomic layer deposition (ALD) is an easy, reproducible method for the synthesis of TiO2-supported platinum catalyst for methanol oxidation with superior anti-poisoning properties. [ABSTRACT FROM AUTHOR]

In this study, the degradation of naphthalene in water was performed via photocatalysis with two different configurations: UV-irradiated TiO2 deposited on cellulosic tissue and photocatalytic luminous textiles. The photocatalytic performance of these configurations was evaluated in terms of pollutant removal and mineralization yield. Moreover, the influence of key operating parameters, such as the initial pollutant concentration, solution turbidity, the number of tissues, and the type of irradiation, was investigated. The results showed a complete removal of 8 mg/L of naphthalene with photocatalytic luminous textiles after 4 h of UV irradiation, with a mineralization yield of 80%. The impact of the turbidity shows that at 90 NTU, reductions in photocatalytic activity of 30% and 10% were recorded for the UV-irradiated TiO2 deposed on cellulosic tissue and photocatalytic luminous textiles, respectively. The reactive oxygen species (ROS) concentrations were monitored during photocatalysis to better understand the contribution of each active species in the mechanism reaction of naphthalene oxidation. The results show that the hydroxyl radical (•OH) is responsible for 70% of pollutant oxidation. A scaling up of the water treatment with photocatalytic luminous textiles was performed. The extrapolation confirmed the same trends observed at the laboratory scale in terms of degradation and mineralization. [ABSTRACT FROM AUTHOR]

Even if huge efforts are made to push alternative mobility concepts, such as electric cars and fuel-cell-powered cars, the significance and use of liquid fuels is anticipated to stay high during the 2030s. Biomethane and synthetic natural gas (SNG) might play a major role in this context, as they are raw material for chemical industry that is easy to be stored and distribute via existing infrastructure, and are a versatile energy carrier for power generation and mobile applications. Since biomethane and synthetic natural gas are suitable for power generation and for mobile applications, they can therefore replace natural gas without any infrastructure changes, thus playing a major role.In this paper, we aim to comprehend the direct production of synthetic natural gas from CO 2 and H 2 in a Sabatier process based on a thermodynamic analysis as well as a multi-step kinetic approach. For this purpose, we thoroughly discuss CO 2 methanation to control emissions in order to maximize the methane formation along with minimizing the CO formation and to understand the complex methanation process. We consider an equilibrium and kinetic modeling study on the NiO- SiO 2 catalyst for methanation focusing on CO 2 -derived SNG. The thermodynamic analysis of CO 2 hydrogenation is preformed to define the optimal process parameters followed by the kinetic simulations for catalyst development. The investigation presented in this paper can also be used for developing machine learning algorithms for methanation processes. [ABSTRACT FROM AUTHOR]

In 2020, China put forward the national energy and economic development strategy goal of "carbon peak and carbon neutrality"; in this context, the hydrogenation of carbon dioxide into clean energy and high-value-added chemicals can effectively alleviate the current environmental pressure. This process represents a crucial avenue for the advancement of green energy and the realisation of a sustainable energy development strategy. Among the efficient catalysts designed for CO2 hydrogenation reactions, transition metal cobalt has garnered extensive attention from researchers due to its relatively abundant reserves and low economic cost. This paper first introduces the thermodynamic process of carbon dioxide hydrogenation and discusses methods to improve the efficiency of the catalytic reaction from a thermodynamic perspective. It then briefly describes the reaction mechanism of cobalt-based catalysts in the carbon dioxide hydrogenation reaction. Based on this understanding, this paper reviews recent research on the application of cobalt-based catalysts in the hydrogenation of carbon dioxide to produce methane, hydrocarbon chemicals, and alcohols. Finally, the methods to improve the catalytic efficiency of these catalysts are discussed, and future research directions are proposed. [ABSTRACT FROM AUTHOR]

The article presents a list of recipients of the Best Paper Award 2016 by the periodical including the top three research articles and the top three review articles.

The thermal and catalytic pyrolysis of two kinds of Tetra Pak waste (TP-1 and TP-2) over three different acidic catalysts—HZSM-5(SiO2/Al2O3, 30), HBeta (38), and Al-MCM-41(20)—were investigated in this study. Tetra Pak (TP) wastes consist of composite material comprising kraft paper, polyethylene (PE) film, and aluminum foil. Thermal decomposition behaviors during the pyrolysis of TPs were monitored using a thermogravimetric (TG) analyzer and tandem micro reactor-gas chromatography/mass spectrometry (TMR-GC/MS). Neither the interaction between the non-catalytic pyrolysis intermediates of kraft paper and PE, nor the effect of aluminum foil have been monitored during the non-catalytic TG analysis of TPs. The maximum decomposition temperatures of PE in TP-1 shifted from 465 °C to 432 °C by HBeta(38), 439 °C by HZSM-5(30), and 449 °C by Al-MCM-41(20), respectively. The results of the TMR-GC/MS analysis indicate that the non-catalytic pyrolysis of TPs results in the formation of large amounts of furans and heavy hydrocarbons and they are converted efficiently to aromatic hydrocarbons over the acidic catalysts. Among the three catalysts, HZSM-5(30) produced the largest amount of aromatic hydrocarbons, followed by HBeta(38) and Al-MCM-41(20) owing to their different acidity and pore size. Compared to TP-1, TP-2 produced a larger amount of aromatic hydrocarbons via catalytic pyrolysis because of its relatively larger PE content. The synergistic formation of aromatic hydrocarbons was also enhanced during the catalytic pyrolysis of TPs due to the effective role of PE as hydrogen donor to kraft paper. In terms of their catalytic effectiveness, HZSM-5(30) had a longer lifetime than HBeta(38). [ABSTRACT FROM AUTHOR]

Being the major renewable source of bio-aromatics, lignin possesses considerable potential for the chemical industry as raw material. Kraft lignin is a couple product of paper industry with an annual production of 55,000,000 ton/y and is considered the largest share of available lignin. Here we report a facile approach of Kraft lignin depolymerization to defined oligomeric units with yields of up to 70 wt.%. The process implies utilization of an aqueous base in combination with a metal containing catalyst and an alcohol under non-oxidative atmosphere at 300 °C. An advantage of the developed approach is the facile separation of the oligomer product that precipitates from the reaction mixture. In addition, the process proceeds without char formation; both factors make it attractive for industrialization. The suppression of the repolymerization processes that lead to char formation is possible when the combination of metal containing catalyst in the presence of an alcohol is used. It was found that the oligomer units have structural features found in phenol-acetaldehyde resins. These features result from the base catalyzed condensation of lignin fragments with in situ formed aldehydes. Catalytic dehydrogenation of the alcohol provides the latter. This reaction pathway is confirmed by the presence condensation products of Guerbet type reactions. [ABSTRACT FROM AUTHOR]

The continuous requirement for pre-bleaching processes on kraft pulp, employing a range of compatible enzymes, aims to mitigate the pollution caused by chemical bleaching agents. In the present study, the laccase-producing bacterium Bacillus licheniformis BK-1 was isolated from the Bakreshwar hot spring in India and tested for laccase production using different lignocellulosic substrates. The isolate was found to produce maximum laccase (8.25 IU/mL) in the presence of rice bran as a substrate, followed by 5.14 IU/mL using sawdust over a 48 h period. Laccase production doubled when medium parameters were optimized using a central composite design. The bleaching of rice straw pulp was accomplished using a laccase, xylanase (previously extracted from the same bacteria), and laccase–xylanase mixture. The mix-wood kraft pulp treated with the enzyme mixture at pH 7.0 and 50 °C temperature for up to 180 min reduced the chlorine amount by 50% compared to the control. The results also revealed that the enzyme mixture improved the pulp's optical (brightness 10.39%) and physical (tear index 39.77%, burst index 22.82%, and tensile strength 14.28%) properties with 50% chlorine dose. These exceptional properties underscore the enzyme mixture's suitability for pulp pre-bleaching in paper manufacturing, offering a safer and more environmentally friendly process. [ABSTRACT FROM AUTHOR]

This article discusses the practical applications of nanoparticles (NPs) in various fields, such as medicine, cosmetics, catalysis, and environmental protection. The properties of NPs are influenced by their size, shape, and composition, and their use in catalysis can greatly enhance their activity and efficiency. This special issue focuses specifically on the application of NPs in catalysis for environmental protection, including processes such as the oxidation of volatile organic compounds, hydrogen production, CO2 reduction, wastewater treatment, and soot oxidation. The article expresses gratitude towards the reviewers and authors who contributed to the special issue, acknowledging their time and effort in reviewing the papers and appreciating the high-quality research and review papers submitted. [Extracted from the article]

Microbial fuel cells (MFCs) are sustainable energy recovery systems because they use organic waste as biofuel. Using critical raw materials (CRMs), like platinum-group metals, at the cathode side threatens MFC technology's sustainability and raises costs. By developing an efficient electrode design for MFC performance enhancement, CRM-based cathodic catalysts should be replaced with CRM-free materials. This work proposes developing and optimizing iron-based air cathodes for enhancing oxygen reduction in MFCs. By subjecting iron phthalocyanine and carbon black pearls to controlled thermal treatments, we obtained Fe-based electrocatalysts combining high surface area (628 m2 g−1) and catalytic activity for O2 reduction at near-neutral pH. The electrocatalysts were integrated on carbon cloth and carbon paper to obtain gas diffusion electrodes whose architecture was optimized to maximize MFC performance. Excellent cell performance was achieved with the carbon-paper-based cathode modified with the Fe-based electrocatalysts (maximum power density-PDmax = 1028 mWm−2) compared to a traditional electrode design based on carbon cloth (619 mWm−2), indicating the optimized cathodes as promising electrodes for energy recovery in an MFC application. [ABSTRACT FROM AUTHOR]

A proton exchange membrane fuel cell (PEMFC) is an efficient and environmentally friendly power production technology that uses hydrogen energy. The cathodic oxygen reduction electrode is a critical component in the development of PEMFC. Most techniques deposit catalyst nanoparticles in areas that are inaccessible for catalytic processes, reducing platinum utilization. The substrate used in this study was carbon paper (CP) with a self-supporting structure. First, electrochemical acidification technology was employed to modify the CP's surface, followed by nanoparticle manufacturing and fixation on the CP in a single step by electrodeposition. The Pt/C0.5V2.24CP catalyst electrode demonstrated high-quality activity in the oxygen reduction reaction (ORR), with a homogeneous particle dispersion and particle size of around 50 nm. The mass activity and electrochemical active surface area (ECSA) of the Pt/C0.5V2.24CP catalyst electrode were 1.74 and 3.98 times higher than those of the Pt/C/CP-1 electrodes made with commercial catalysts, respectively. After 5000 cycles of accelerated durability testing (ADT), the mass activity and ECSA were 1.28 times and 6.16 times more than Pt/C/CP-1. This paper successfully proved the viability of electrodepositing Pt nanoparticles on CP following acidification, and that the electrochemical acidification methods have a positive influence on improving electrode ORR activity. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue of the journal Catalysts titled "Catalytic Epoxidation Reaction." The special issue focuses on the research efforts in catalyst and process intensification in the epoxidation of various substances, including gaseous molecules, molecules in multiphase, triglycerides, terpenes, and olefins. The special issue includes nine research articles and two reviews, covering topics such as kinetic modeling, catalyst preparation and characterization, and enzymatic catalysis. The articles provide insights into the epoxidation process and offer potential advancements for future research in this field. [Extracted from the article]

This work summarizes the recent progress of nitrogen (N)-doped metal-free catalysts for the ORR and provides future perspectives for their further development. The electrochemical properties towards hydrogen oxidation reaction in alkaline medium were studied using the rotating disc electrode and cycling voltammetry methods, revealing a significant role of the TM dopants in the promotion of the hydrogen electrooxidation kinetics of the binary Ni-TM/C materials. In this work, a nitrogen-containing bidentate ligand was synthesized as a nitrogen precursor for making an oxygen reduction catalyst. [Extracted from the article]

Over the past three decades, organic reactions catalyzed by lipase have been extensively studied. To overcome the drawbacks of free enzymes and develop new and sustainable biocatalysts, various insoluble forms of lipases were examined. Especially interesting are lipases immobilized on silica nanoparticles (SiNPs) due to their promising unique and advantageous physicochemical properties. Therefore, the present paper presents an overview of different organic functionalization methods of SiNP surfaces to create a more favorable microenvironment for lipase molecules. Given the high commercial value of lipases in biotechnological applications, the second part of this paper highlights the key industrial sectors utilizing these nanobiocatalysts. This review discusses the key industrial applications of silica-based lipase nanobiocatalysts, including biodiesel production, flavor ester synthesis, and pharmaceutical applications such as racemization. Special attention is given to emerging technologies, particularly the use of immobilized lipases in polymer biodegradation and polymerization reactions. These advances have paved the way for innovative solutions, such as self-degrading bioplastics, which hold significant promise for sustainable materials and environmental protection. This comprehensive overview underscores the transformative potential of lipase–SiNP nanobiocatalysts in both industrial and environmental contexts. [ABSTRACT FROM AUTHOR]

Cellulose nanocrystals (CNCs) can be extracted from cellulosic materials through the degradation of non-crystalline cellulose domains in the feedstock via acid hydrolysis. However, the sugars released from the hydrolysis process cannot be easily recovered from the acid waste stream. In this study, cellulases were used to preferentially degrade non-crystalline domains with the objectives of recovering sugars and generating a feedstock with concentrated CNC precursors for a more efficient acid hydrolysis process. Filter paper and wood pulp substrates were enzyme-treated for 2-10 h to recover 20-40 wt % glucose. Substantial xylose yield (6-12 wt %) was generated from wood pulp. CNC yields from acid hydrolysis of cellulases-treated filter paper, and wood pulp improved by 8-18% and 58-86%, respectively, when compared with the original substrate. It was thought that CNC precursors accumulated in the cellulases-treated feedstock due to enzymatic digestion of the more accessible non-crystalline celluloses. Therefore, acid hydrolysis from enzyme-treated feedstock will require proportionally less water and reagents resulting in increased efficiency and productivity in downstream processes. This study demonstrates that an enzymatically-mediated process allows recovery of fermentable sugars and improves acid hydrolysis efficiency for CNC production. [ABSTRACT FROM AUTHOR]

The reduction of carbon dioxide to valuable chemical products could favor the establishment of a sustainable carbon cycle, which has attracted much attention in recent years. Developing efficient catalysts plays a vital role in the carbon dioxide reduction reaction (CO2RR) process, but with great challenges in achieving a uniform distribution of catalytic active sites and rapid mass transfer properties. Hierarchical porous materials with a porous hierarchy show great promise for application in CO2RRs owing to the high specific surface area and superior porous connection. Plenty of breakthroughs in recent CO2RR studies have been recently achieved regarding hierarchical porous materials, indicating that a summary of hierarchical porous materials for carbon dioxide reduction reactions is highly desired and significant. In this paper, we summarize the recent breakthroughs of hierarchical porous materials in CO2RRs, including classical synthesis methods, advanced characterization technologies, and novel CO2RR strategies. Moreover, by highlighting several significant works, the advantages of hierarchical porous materials for CO2RRs are analyzed and revealed. Additionally, a perspective on hierarchical porous materials for CO2RRs (e.g., challenges, potential catalysts, promising strategies, etc.) for future study is also presented. It can be anticipated that this comprehensive review will provide valuable insights for further developing efficient alternative hierarchical porous catalysts for CO2 reduction reactions. [ABSTRACT FROM AUTHOR]

Electrocatalytic nitrate reduction enables the recovery of nitrate from water under mild conditions and generates ammonia for nitrogen fertilizer feedstock in an economical and green means. In this paper, Co/biomass carbon (Co/BC) composite catalysts were prepared by co-carbonization of straw and metal–organic framework material ZIF-67 for electrocatalytic nitrate reduction using hydrothermal and annealing methods. The metal–organic framework structure disperses the catalyst components well and provides a wider specific surface area, which is conducive to the adsorption of nitrate and the provision of more reactive active sites. The introduction of biomass carbon additionally enhances the electrical conductivity of the catalyst and facilitates electron transport. After electrochemical testing, Co/BC-100 exhibited the best performance in electrocatalytic nitrate reduction to ammonia, with an ammonia yield of 3588.92 mmol gcat.−1 h−1 and faradaic efficiency of 97.01% at −0.5 V vs. RHE potential. This study provides a promising approach for the construction of other efficient cobalt-based electrocatalysts. [ABSTRACT FROM AUTHOR]

Aiming at problems such as low energy utilization efficiency and the high oxygen content of liquid products in the process of conventional biomass conversion to prepare liquid fuels, the deoxygenation pyrolysis technology route of larch based on microwave heating was proposed in this paper. Two kinds of calcium–iron composite oxygen carriers, including Ca2Fe2O5 with iron ore structure and CaFe2O4 with spinel structure, were successfully synthesized. The results showed that the selectivity of ideal products was improved under the action of single iron-based oxygen carriers; however, the deoxygenation effect was undesirable. Under the action of CaFe2O4, the selectivity of aromatics was increased to 27.17% and the selectivity of phenols was decreased to 36.46%, which mainly existed in the form of O1P with low oxygen content. The oxygen content of bio-oil was reduced to 27.70% and the calorific value was increased to 29.05 MJ/kg, thus leading to a great improvement in the quality of liquid products. After the pyrolysis reaction, the Fe2P3/2 XPS peak of CaFe2O4 shifted to a higher binding energy and was characterized as higher valence of iron oxide, which proved its "oxygen grabbing" capacity in microwave pyrolysis. The deoxygenation conversion of larch without an external hydrogen supply was achieved. [ABSTRACT FROM AUTHOR]

The global climate crisis, driven by unchecked industrialization and ecological negligence, compels humanity to seek alternative ways to either avert or mitigate the disastrous environmental phenomena encountered, particularly in recent years. The significant quantities of biomass generated by human activities may serve as important resources for technological applications, and biomass valorization offers dual benefits. This review emphasizes the potential of starch and lignin as adaptable materials for the advancement of sustainable and eco-friendly technologies. By investigating catalytic alterations, we may advance a more sustainable future and tackle the escalating issues of environmental pollution and sustainability. Catalytic alterations of lignin and starch have become essential techniques for their valorization. Biopolymers can be changed into useful chemicals and materials, like levulinic acid, lactic acid, 5-HMF and modified starch, which are used in the paper, textile, and coatings industries. Besides transforming into chemicals, lignin and starch can produce reactive carbon compounds that find application in both classical chemistry and photocatalysis. Additionally, we can use their highly functionalized polymeric matrices as catalysts. We can change the polymeric matrices' chemical backbone to make them better at speeding up reactions like cross-coupling and multicomponent reactions. [ABSTRACT FROM AUTHOR]