Search

Water-activated shape memory bacterial cellulose/polyurethane nanocomposites were prepared by the immersion of bacterial cellulose (BC) wet membranes into waterborne polyurethane (WBPU) dispersions for different times. The high affinity between the hydrophilic BC and water stable polyurethane led to the coating and embedding of the BC membrane into the WBPU, facts that were confirmed by FTIR, SEM and mechanical testing of the nanocomposites. The mechanical performance of the nanocomposites resulted enhanced with respect to the neat WBPU, confirming the reinforcing effect of the BC membrane. An improvement of the shape fixity ability and faster recovery process with the presence of BC was observed. In 3 min, the nanocomposite with highest BC content recovered the 92.8 ± 6.3% of the original shape, while the neat WBPU only recovered the 33.4 ± 9.6%. The obtained results indicated that 5 min of impregnation time was enough to obtain nanocomposites with improved mechanical performance and fast shape recovery for potential biomedical applications. The present work provides an approach for developing environmentally friendly and biocompatible BC/polyurethane based materials with enhanced mechanical and shape memory properties.

Waterborne poly(urethane-urea)s (WPUUs) can be employed as a base for the preparation of new materials with novel properties and applications, such as hydrogels. In this work, sodium alginate (SA) was incorporated into WPUUs and their nanocomposites with TiO2 nanoparticles. The influence of the addition of SA and TiO2 nanoparticles on the final properties of WPUUs based hydrogels was investigated. It was proven that the hydrogen bonding interactions that took place between WPUU and SA strongly affected the final properties. The glass transition temperature and thermal stability of investigated hydrogels were affected depending on the soft segment composition. The prepared hydrogels exhibited swelling ability in an acidic medium. The porous structure of the prepared hydrogels was confirmed by the scanning electron microscope (SEM) measurements. In fact, the mechanical properties indicated an improvement in the compressive modulus with the increase of the SA content. Furthermore, the prepared hydrogels allowed the cell proliferation of human fibroblasts.

Stimuli–responsive chitosan–based hydrogels for biomedical applications using the Diels–Alder reaction were prepared. Furan modified chitosan (Cs–Fu) was cross–linked with polyetheramine derived bismaleimide at different equivalent ratios in order to determine the effect in the swelling and release properties on the final CsFu:BMI hydrogels. The Diels Alder cross–linking reaction was monitored by UV–vis spectroscopy and rheological measurements. Both the sol–gel transition value and the final storage modulus for the different formulations were similar and close to 40 min and 400 Pa, respectively. On the contrary, the swelling degree was found to be strongly dependent on the amount of bismaleimide, mainly in acidic medium, where the increased cross–linking reduced the swelling value in 25%, but maintaining the sustained drug release in the simulated gastrointestinal environment. Our study suggested that these DA–cross–linked chitosan hydrogels could be potential carriers for targeted drug administration.

Alginate and nanocellulose are potential biomaterials to be employed as bioinks for three-dimensional (3D) printing. Alginate-cellulose nanofibers (A-CNF) formulations with CNF amounts up to 5 wt% were developed and rheologically characterized to evaluate their printability. Results showed that formulations with less than 3 wt% CNF did not present suitable characteristics to ensure shape fidelity after printing. Selected A-CNF bioinks were 3D printed and freeze-dried to obtain porous scaffolds. Morphological and mechanical analysis were performed, showing that CNF contributed to the reinforcement of the scaffolds and modulated their porosity. The applicability for drug delivery was evaluated by the addition of curcumin to printable A-CNF formulations. The curcumin loaded bioinks were successfully 3D printed in patches and the in vitro release tests showed that alginate and CNF played an important role in curcumin stabilization, whereas the CNF content and the disintegration of the scaffold were essential in the release kinetics.

Focusing on eco-friendly materials, cellulose nanocrystals (CNC) have gained attention as nanoreinforcement due to their exceptional properties conferred by the elevated length/diameter aspect ratio and high specific mechanical properties. Furthermore, their water dispersibility makes them suitable nanoreinforcements for their incorporation in waterborne polyurethanes (WBPU). The possibility of tailoring the properties by varying the composition and nature of the reagents, opens the opportunity for a wide range of applications. Therefore, in this work a WBPU was synthesized for the preparation of nanocomposite films with different CNC content and the properties of the films were analyzed. The effective incorporation of CNC resulted in an increase in moduli and stress at yield besides in an increased thermomechanical stability, reaching the percolation threshold at a 3wt% CNC as determined theoretically. Nevertheless, above the percolation threshold, the presence of agglomerates reduced slightly these values. The prepared nanocomposites showed increased hydrophilicity after CNC addition.

This study has been carried out to design novel, environmentally friendly membranes by in situ and ex situ routes based on bacterial cellulose (BC) as a template for the chitosan (Ch) as functional entity for the elimination of copper in wastewaters. Two routes led to bionanocomposites with different aspect and physico-chemical properties. The mechanical behaviour in wet state, strongly related to crystallinity and water holding capacity, resulted to be very different depending on the preparation route although the Ch content was very similar: 35 and 37 wt% for the in situ and ex situ membranes, respectively. The morphological characterization suggested a better incorporation of the Ch into BC matrix through the in situ route. The cooper removal capacity of these membranes was analyzed and in situ prepared membrane showed the highest values, about 50%, for initial concentrations of 50 and 250 mg L−1. Moreover the reusability of the membranes was assessed. This is the first time that the whole 3D nano-network BC membrane is used to provide physical integrity for chitosan to develop eco-friendly membranes with potential applications in heavy metal removal.

Corncob agricultural waste was used as a source of arabinoxylan for preparation of films. Three arabinoxylan samples were prepared: crude extract (CCAX), purified by a washing step, and purified by bleaching CCAX. Films prepared with untreated CCAX were water soluble, yellowish in color and had poor mechanical properties. After the purification processes the Young's modulus increased from similar to 293 MPa to similar to 1400-1600 MPa, and strength was improved from similar to 9 MPa to around 53 MPa, while the strain at break was kept at similar to 8% both in untreated and purified CCAX. The contact angle was increased from similar to 21.3 degrees to 67-74 degrees after washing or bleaching CCAX. Acetylation of bleached CCAX showed the highest thermal resistance (325 degrees C), had low T-g (125 degrees C) and a high contact angle (80 degrees), and its films were stronger (strength similar to 67 MPa; Young's modulus similar to 2241 MPa) and more flexible (similar to 13%). These characteristics make purified CCAX a suitable material to be used as a matrix for film applications.

Electrospinning offers the possibility of obtaining fibers mats from polymer solutions. The use of environmentally-friendly waterborne polyurethane (WBPU) allows obtaining electrospun polyurethane mats in water medium. Furthermore, the incorporation of water dispersible nanoentities, like renewable cellulose nanocrystals (CNC), is facilitated. Therefore, in this work, a WBPU was synthesized and CNC were isolated for preparing WBPU-CNC dispersions nanocomposites with 1 and 3wt% of CNC following both the classical mixing by sonication, and the innovative in-situ route. The dispersions were used for obtaining electrospun mats assisted by poly(ethylene oxide) (PEO) as polymer template. Moreover, the extraction of PEO with water resulted in continuous WBPU-CNC mats, showing different properties respect to WBPU-CNC mats containing PEO. The effective addition of CNC led to more defined cylindrical morphologies and the two alternative incorporation routes induced to different CNC dispositions in the matrix, which modified fibers diameters, and thus, mats final properties.

In the present work, thermoplastic maize starch based bionanocomposites were prepared as transparent films, plasticized with 35% of glycerol and reinforced with both waxy starch (WSNC) and cellulose nanocrystals (CNC), previously extracted by acidic hydrolysis. The influence of the nanofiller content was evaluated at 1 wt.%, 2.5 wt.% and 5 wt.% of WSNC. The effect of adding the two different nanoparticles at 1 wt.% was also investigated. As determined by tensile measurements, mechanical properties were improved at any composition of WSNC. Water vapour permeance values maintained constant, whereas barrier properties to oxygen reduced in a 70%, indicating the effectiveness of hydrogen bonding at the interphase. The use of CNC or CNC and WSNC upgraded mechanical results, but no significant differences in barrier properties were obtained. A homogeneous distribution of the nanofillers was demonstrated by atomic force microscopy, and a shift of the two relaxation peaks to higher temperatures was detected by dynamic mechanical analysis.

Cellulose nanocrystals (CNC) successfully obtained from microcrystalline cellulose (MCC) were dispersed in a thermoplastic polyurethane as matrix. Nanocomposites containing 1.5, 5, 10 and 30 wt% CNC were prepared by solvent casting procedure and properties of the resulting films were evaluated from the viewpoint of polyurethane microphase separated structure, soft and hard domains. CNC were effectively dispersed in the segmented thermoplastic elastomeric polyurethane (STPUE) matrix due to the favorable matrix–nanocrystals interactions through hydrogen bonding. Cellulose nanocrystals interacted with both soft and hard segments, enhancing stiffness and stability versus temperature of the nanocomposites. Thermal and mechanical properties of STPUE/CNC nanocomposites have been associated to the generated morphologies investigated by AFM images.