Search

Nonsurgical bleeding occurs in a significant proportion of patients implanted with continuous-flow ventricular assist devices (CF-VADs) and is associated with nonphysiologic flow with diminished pulsatility. An in vitrovascular pulse perfusion model seeded with adult human aortic endothelial cells (HAECs) was used to identify biomarkers sensitive to changes in pulsatility. Diminished pulsatility resulted in an ~45% decrease in von Willebrand factor (vWF) levels from 9.80 to 5.32 ng/ml (n = 5, p< 0.05) and a threefold increase in angiopoietin-2 (ANGPT-2) levels from 775.29 to 2471.93 pg/ml (n = 5, p< 0.05) in cultured HAECs. These changes are in agreement with evaluation of patient blood samples obtained pre-CF-VAD implant and 30-day postimplant: a decrease in plasma vWF level by 50% from ~45.59 to ~22.49 μg/ml (n = 15, p< 0.01) and a 64% increase in plasma ANGPT-2 level from 7,073 to 11,615 pg/ml (n = 8, p< 0.05). This study identified vWF and ANGPT-2 as highly sensitive to changes in pulsatility, in addition to interleukin-6 (IL-6), IL-8, and tumor necrosis-α (TNF-α). These biomarkers may help determine the optimal level of pulsatility and help identify patients at high risk of nonsurgical bleeding.

Rotary biventricular assist devices (BiVAD) are becoming a clinically accepted treatment option for end-stage biventricular failure. To improve BiVAD efficacy and safety, we propose a control algorithm to achieve the clinical objectives of maintaining left-right–sided balance, restoring physiologic flows, and preventing ventricular suction. The control algorithm consists of two proportional-integral (PI) controllers for left and right ventricular assist devices (LVAD and RVAD) to maintain differential pump pressure across LVAD (ΔPL) and RVAD (ΔPR) to provide left-right balance and physiologic flow. To prevent ventricular suction, LVAD and RVAD pump speed differentials (ΔRPML, ΔRPMR) were maintained above user-defined thresholds. Efficacy and robustness of the proposed algorithm were tested in silicofor axial and centrifugal flow BiVAD using 1) normal and excessive ΔPLand/or ΔPRsetpoints, 2) rapid threefold increase in pulmonary vascular or vena caval resistances, 3) transient responses from exercise to rest, and 4) ventricular fibrillation. The study successfully demonstrated that the proposed BiVAD algorithm achieved the clinical objectives but required pressure sensors to continuously measure ΔPLand ΔPR. The proposed control algorithm is device independent, should not require any modifications to the pump or inflow/outflow cannulae/grafts, and may be directly applied to current rotary blood pumps for biventricular support.

Counterpulsation devices (CPDs) require an accurate, reliable electrocardiogram (ECG) waveform for triggering inflation and deflation. Surface electrodes are for short-term use, and transvenous/epicardial leads require invasive implant procedure. A subcutaneous ECG lead configuration was developed as an alternative approach for long-term use with timing mechanical circulatory support (MCS) devices. In this study, efficacy testing was completed by simultaneously recording ECG waveforms from clinical-grade epicardial (control) and subcutaneous (test) leads in chronic ischemic heart failure calves implanted with CPD for up to 30 days. Sensitivity and specificity of CPD triggering by R-wave detection was quantified for each lead configuration. The subcutaneous leads provided 98.9% positive predictive value and 98.9% sensitivity compared to the epicardial ECG leads. Lead migration (n = 1) and fracture (n = 1) were observed in only 2 of 40 implanted leads, without adversely impacting triggering efficacy due to lead redundancy. These findings demonstrate the efficacy of subcutaneous ECG leads for long-term CPD timing and potential use as an alternative method for MCS device timing.

Continuous flow (CF) left ventricular assist devices (LVAD) diminish vascular pressure pulsatility, which may be associated with clinically reported adverse events including gastrointestinal bleeding, aortic valve insufficiency, and hemorrhagic stroke. Three candidate CF LVAD pump speed modulation algorithms designed to augment aortic pulsatility were evaluated in mock flow loop and ischemic heart failure (IHF) bovine models by quantifying hemodynamic performance as a function of mean pump speed, modulation amplitude, and timing. Asynchronous and synchronous copulsation (high revolutions per minute [RPM] during systole, low RPM during diastole) and counterpulsation (low RPM during systole, high RPM during diastole) algorithms were tested for defined modulation amplitudes (±300, ±500, ±800, and ±1,100 RPM) and frequencies (18.75, 37.5, and 60 cycles/minute) at low (2,900 RPM) and high (3,200 RPM) mean LVAD speeds. In the mock flow loop model, asynchronous, synchronous copulsation, and synchronous counterpulsation algorithms each increased pulse pressure (ΔP= 931%, 210%, and 98% and reduced left ventricular external work (LVEW = 20%, 22%, 16%). Similar improvements in vascular pulsatility (1,142%) and LVEW (40%) were observed in the IHF bovine model. Asynchronous modulation produces the largest vascular pulsatility with the advantage of not requiring sensor(s) for timing pump speed modulation, facilitating potential clinical implementation.

Axial (AX) and centrifugal (CFG) rotary blood pumps have gained clinical acceptance for the treatment of advanced heart failure. Differences between AX and CFG designs and mechanism of blood flow delivery may offer clinical advantages. In this study, pump characteristics, and acute physiologic responses during support with AX (HeartMate II) and CFG (HVAD) left ventricular assist devices (LVAD) were investigated in mock loop and chronic ischemic heart failure bovine models. In the mock loop model, pump performance was characterized over a range of pump speeds (HeartMate II: 7,000–11,000 rpm, HVAD: 2,000–3,600 rpm) and fluid viscosities (2.7 cP, 3.2 cP, 3.7 cP). In the ischemic heart failure bovine model, hemodynamics, echocardiography, and end-organ perfusion were investigated. CFG LVAD had a flatter HQ curve, required less power, and had a more linear flow estimation relation than AX LVAD. The flow estimation error for the AX LVAD (±0.9 Lmin at 2.7 cP, ±0.7 Lmin at 3.2 cP, ±0.8 Lmin at 3.7 cP) was higher than the CFG LVAD (±0.5 Lmin at 2.7 cP, ±0.2 Lmin at 3.2 cP, ±0.5 Lmin at 3.7 cP). No differences in acute hemodynamics, echocardiography, or end-organ perfusion between AX and CFG LVAD over a wide range of support were statistically discernible. These findings suggest no pronounced acute differences in LV volume unloading between AX and CFG LVAD.

In the event of left ventricular assist device (LVAD) failure, we hypothesized that rotary blood pumps will experience significant retrograde flow and induce adverse physiologic responses. Catastrophic LVAD failure was investigated in computer simulation with pulsatile, axial, and centrifugal LVAD, mock flow loop with pulsatile (PVAD) and centrifugal (ROTAFLOW), and healthy and chronic ischemic heart failure bovine models with pulsatile (PVAD), axial (HeartMate II), and centrifugal (HVAD) pumps. Simulated conditions were LVAD “off” with outflow graft clamped (baseline), LVAD “off” with outflow graft unclamped (LVAD failure), and LVAD “on” (5 Lmin). Hemodynamics (aortic and ventricular blood pressures, LVAD flow, and left ventricular volume), echocardiography (cardiac volumes), and end-organ perfusion (regional blood flow microspheres) were measured and analyzed. Retrograde flow was observed with axial and centrifugal rotary pumps during LVAD failure in computer simulation (axial = -3.4 Lmin, centrifugal = -2.8 Lmin), mock circulation (pulsatile = -0.1 Lmin, centrifugal = -2.7 Lmin), healthy (pulsatile = -1.2 ± 0.3 Lmin, axial = -2.2 ± 0.2 Lmin, centrifugal = -1.9 ± 0.3 Lmin), and ischemic heart failure (centrifugal = 2.2 ± 0.7 Lmin) bovine models for all test conditions (p< 0.05). Differences between axial and centrifugal LVAD were statistically indiscernible. Retrograde flow increased ventricular end-systolic and end-diastolic volumes and workload, and decreased myocardial and end-organ perfusion during LVAD failure compared with baseline, LVAD support, and pulsatile LVAD failure.

The risk for left ventricular (LV) suction during left ventricular assist devices (LVAD) support has been a clinical concern. Current development efforts suggest LVAD suction prevention and physiologic control algorithms may require chronic implantation of pressure or flow sensors, which can be unreliable because of baseline drift and short lifespan. To overcome this limitation, we designed a sensorless suction prevention and physiologic control (eSPPC) algorithm that only requires LVAD intrinsic parameters (pump speed and power). Two gain-scheduled, proportional-integral controllers maintain a differential pump speed (RPM) above a user-defined threshold to prevent LV suction while maintaining an average reference differential pressure (P) between the LV and aorta. RPMis calculated from noisy pump speed measurements that are low-pass filtered, and Pis estimated using an extended Kalman filter. Efficacy and robustness of the eSPPC algorithm were evaluated in silicoduring simulated rest and exercise test conditions for 1) excessive Psetpoint (ES); 2) rapid eightfold increase in pulmonary vascular resistance (PVR); and 3) ES and PVR. Simulated hemodynamic waveforms (LV pressure and volume; aortic pressure and flow) using only intrinsic pump parameters showed the feasibility of our proposed eSPPC algorithm in preventing LV suction for all test conditions.

Myocardial recovery with left ventricular assist device (LVAD) support is uncommon and unpredictable. We tested the hypothesis that injectable particulate extracellular matrix (P-ECM) with LVAD support promotes cell proliferation and improves cardiac function. LVAD, P-ECM, and P-ECM LVAD therapies were investigated in chronic ischemic heart failure (IHF) calves induced using coronary embolization. Particulate extracellular matrix emulsion (CorMatrix, Roswell, GA) was injected intramyocardially using a 7 needle pneumatic delivery tool. Left ventricular assist devices (HVAD, HeartWare) were implanted in a left ventricle (LV) apex to proximal descending aorta configuration. Cell proliferation was identified using BrdU (5 mgkg) injections over the last 45 treatment days. Echocardiography was performed weekly. End-organ regional blood flow (RBF) was quantified at study endpoints using fluorescently labeled microspheres. Before treatment, IHF calves had an ejection fraction (EF) of 33 ± 2 and left ventricular end-diastolic volume of 214 ± 18 ml with cardiac cachexia (0.69 ± 0.06 kgday). Healthy weight gain was restored in all groups (0.89 ± 0.03 kgday). EF increased with P-ECM HVAD from 36 ± 5 to 75 ± 2, HVAD 38 ± 4 to 58 ± 5, and P-ECM 27 ± 1 to 66 ± 6. P-ECM HVAD demonstrated the largest increase in cell proliferation and end-organ RBF. This study demonstrates the feasibility of combined LVAD support with P-ECM injection to stimulate new cell proliferation and improve cardiac function, which warrants further investigation.

The risk for left ventricular (LV) suction while maintaining adequate perfusion over a range of physiologic conditions during continuous flow LV assist device (LVAD) support is a significant clinical concern. To address this challenge, we developed a suction prevention and physiologic control (SPPC) algorithm for use with axial and centrifugal LVADs. The SPPC algorithm uses two gain-scheduled, proportional-integral controllers that maintain a differential pump speed (RPM) above a user-defined threshold to prevent LV suction, while maintaining an average reference differential pressure (P) between the LV and aorta to provide physiologic perfusion. Efficacy and robustness of the proposed algorithm were evaluated in silicoduring simulated rest and exercise test conditions for (1) PRPMexcessive setpoint (ES); (2) rapid eightfold increase in pulmonary vascular resistance (PVR); and (3) ES and PVR. Hemodynamic waveforms (LV pressure and volume; aortic pressure and flow) were simulated and analyzed to identify suction event(s), quantify total flow output (pump cardiac output), and characterize the performance of the SPPC algorithm. The results demonstrated that the proposed SPPC algorithm prevented LV suction while maintaining physiologic perfusion for all simulated test conditions, and warrants further investigation in vivo.

Biomaterials with direct intramyocardial injection devices have been developed and are being investigated as a potential cardiac regenerative therapy for end-stage ischemic heart failure. Decellularized extracellular matrix (ECM) has been shown to improve cardiac function and attenuate or reverse pathologic remodeling cascades. CorMatrix Cardiovascular, Inc. has developed a porcine small intestinal submucosa-derived particulate extracellular matrix (P-ECM) and ECM Delivery System to provide uniform and controlled intramyocardial delivery of the injectable P-ECM material into infarcted regions. The CorMatrix ECM Delivery System is composed of a Multi-Needle P-ECM Syringe Assembly, Automated Injection Controller, and Tissue Depth Measurement System (portable ultrasound). Feasibility of the P-ECM delivery system was tested intraoperatively in a chronic ischemic heart failure bovine model (n = 11), and demonstrated the ability to control injection volume (0.1–1.0 ml) and depth of penetration (3–5 mm) under regulated injection pressure (150 psi CO2) into the ischemic region. Targeted intramyocardial delivery of P-ECM may improve efficacy and enable development of novel patient-specific therapy.

Mechanical circulatory support—either ventricular assist device (VAD, left-sided systemic support) or cavopulmonary assist device (CPAD, right-sided support)—has been suggested as treatment for Fontan failure. The selection of left- versusright-sided support for failing Fontan has not been previously defined. Computer simulation and mock circulation models of pediatric Fontan patients (15–25 kg) with diastolic, systolic, and combined systolic and diastolic dysfunction were developed. The global circulatory response to assisted Fontan flow using VAD (HeartWare HVAD, Miami Lakes, FL) support, CPAD (Viscous Impeller Pump, Indianapolis, IN) support, and combined VAD and CPAD support was evaluated. Cavopulmonary assist improves failing Fontan circulation during diastolic dysfunction but preserved systolic function. In the presence of systolic dysfunction and elevated ventricular end-diastolic pressure (VEDP), VAD support augments cardiac output and diminishes VEDP, while increased preload with cavopulmonary assist may worsen circulatory status. Fontan circulation can be stabilized to biventricular values with modest cavopulmonary assist during diastolic dysfunction. Systemic VAD support may be preferable to maintain systemic output during systolic dysfunction. Both systemic and cavopulmonary support may provide best outcome during combined systolic and diastolic dysfunction. These findings may be useful to guide clinical cavopulmonary assist strategies in failing Fontan circulations.

APK Advanced Medical Technologies (Atlanta, GA) is developing a sutureless beating heart (SBH) left ventricular assist device (LVAD) connector system consisting of anchoring titanium coil, titanium cannula with integrated silicone hemostatic valve, coring and delivery tool, and LVAD locking mechanism to facilitate LVAD inflow surgical procedures. Feasibility testing was completed in human cadavers (n = 4) under simulated normal and hypertensive conditions using saline to observe seal quality in degraded human tissue and assess anatomic fit; acutely in ischemic heart failure bovine model (n = 2) to investigate short-term performance and ease of use; and chronically for 30 days in healthy calves (n = 2) implanted with HeartWare HVAD to evaluate performance and biocompatibility. Complete hemostasis was achieved in human cadavers and animals at LV pressures up to 170 mm Hg. In animals, off-pump (no cardiopulmonary bypass) anchoring of the connector was accomplished in less than 1 minute with no residual bleeding after full delivery and locking of the LVAD; and implant of connector and LVAD were successfully completed in under 10 minutes with total procedure blood loss less than 100 ml. In chronic animals before necropsy, no signs of leakage or disruption at the attachment site were observed at systolic LV pressures >200 mm Hg.

Implantation of ventricular assist devices (VADs) for the treatment of end-stage heart failure (HF) falls decidedly short of clinical demand, which exceeds 100,000 HF patients per year. Ventricular assist device implantation often requires major surgical intervention with associated risk of adverse events and long recovery periods. To address these limitations, HeartWare, Inc. has developed a platform of miniature ventricular devices with progressively reduced surgical invasiveness and innovative patient peripherals. One surgical implant concept is a transapical version of the miniaturized left ventricular assist device (MVAD). The HeartWare MVAD Pump is a small, continuous-flow, full-support device that has a displacement volume of 22 ml. A new cannula configuration has been developed for transapical implantation, where the outflow cannula is positioned across the aortic valve. The two primary objectives for this feasibility study were to evaluate anatomic fit and surgical approach and efficacy of the transapical MVAD configuration. Anatomic fit and surgical approach were demonstrated using human cadavers (n = 4). Efficacy was demonstrated in acute (n = 2) and chronic (n = 1) bovine model experiments and assessed by improvements in hemodynamics, biocompatibility, flow dynamics, and histopathology. Potential advantages of the MVAD Pump include flow support in the same direction as the native ventricle, elimination of cardiopulmonary bypass, and minimally invasive implantation.

In vivopreclinical testing of left ventricular assist devices (LVADs) warrants a large animal model that faithfully simulates human etiology. Although LVAD recipients are in end-stage heart failure (HF), healthy, young animals have served as the experimental platform for most LVAD research and development (R&D) to demonstrate device safety, reliability, and biocompatibility. The rapidly growing HF epidemic, donor heart shortage, and clinical acceptance of LVAD for bridge-to-transplant therapy (BTT) has led to the expanded role of LVAD for destination therapy and bridge-to-recovery therapy. New paradigms for the clinical care of these emerging patient populations are needed. Clinically relevant, robust, and reproducible large animal models of HF are required to demonstrate efficacy, investigate physiologic responses, elucidate genetic, molecular, and cellular mechanism(s), and develop LVAD control strategies. The animal model must be comparable in size, anatomical structure, and phenotype; the technique used to initiate HF must reflect the clinical portrait, should be technically and financially feasible, result in predictable, stable, and irreversible HF, and demonstrate bidirectionality of the remodeling cascade. In this review, large animal species commonly used in cardiac research, techniques used to create chronic HF, and the combined applicability to preclinical LVAD R&D studies are presented.

Clinical acceptance of ventricular assist devices (VADs) as long-term heart failure therapy requires safe and effective circulatory support for a minimum of 5 years. Yet, VAD failure beyond 2 years of support is still a concern. Currently, device controllers cannot consistently predict VAD failure modes, and undetected VAD faults may lead to catastrophic device failure. To minimize this risk, a model-based algorithm for reliable VAD fault detection that only requires VAD revolutions per minute (rpm) was developed. The algorithm was tested using computer models of the human cardiovascular system simulating heart failure and axial flow (AF) or centrifugal flow (CF) VADs. Ventricular assist device rpm was monitored after a step down of motor current for normal and simulated fault conditions (>750 faults). The ability to detect fault conditions with 1, 5, and 10 rpm measurement noise was evaluated. All failure modes affected the VAD rpm responses to the motor current step down. Fault detection rates were >95 for AF and >89 for CF VADs, even with 10 rpm measurement noise. The VAD rpm responses were significantly altered by blood viscosity (3.5–6.2 cP), which should be accounted for in clinical application. The proposed VAD fault detection algorithm may deliver a convenient and nonintrusive way to minimize catastrophic device failures.

Ventricular assist devices (VADs) have been successfully used as a bridge to heart transplant and destination therapy (DT) for congestive heart failure (HF) patients. Recently, continuous flow VAD (CVAD) has emerged as an attractive clinical option for long-term mechanical support of HF patients, with bridge-to-transplant outcomes comparable with pulsatile flow VAD (PVAD). Continuous flow VADs are smaller, more reliable, and less complex than the first-generation PVAD. Despite the widespread clinical use, CVAD support has been associated with gastrointestinal bleeding, hemorrhagic strokes, and aortic valve insufficiency. Speculation that diminished arterial pressure pulsatility associated with continuous flow devices may be contributing to these complications has sparked much debate over CVAD support. Studies comparing pulsatile flow and continuous flow (CF) support have presented conflicting findings, and the relevance to CVAD as DT is uncertain due to variations in device operation, support duration, and the criteria used to quantify pulsatility. Currently, there is interest in developing control algorithms for CVAD to increase the delivered pulsatility as a strategy to mitigate adverse event risks associated with CVAD therapy. There may also be the added benefit of specific control strategies for managing CVAD therapy, potentially improving the rate of myocardial recovery and successful weaning of mechanical circulatory support.

Intra-aortic rotary blood pumps (IARBPs) have been used for partial cardiac support during cardiogenic shock, myocardial infarction, percutaneous coronary intervention, and potentially viable for long-term circulatory support. Intra-aortic rotary blood pump support continuously removes volume from the aortic root, which lowers left ventricular preload, external work (LVEW), and improves end-organ perfusion. However, IARBP support diminishes aortic root pressure and coronary artery. It may also create “coronary steal,” which may produce a myocardial hypoxic state adversely affecting patient outcomes. Our objective was to develop IARBP flow modulation algorithms to eliminate coronary steal and improve the myocardial supply-demand ratio without compromising the clinical benefits of restored end-organ perfusion and reduced LVEW. The hemodynamic responses of the native ventricle, coronary, and systemic vasculature to timing and synchronization of IARBP flow modulation (cyclic variation of pump flow) were investigated using a clinical heart failure (HF) computer simulation model. A total of more than 150 combinations of varying pulse widths and time-shifts to modulate IARBP flow were tested at mean IARBP flow rates of 2, 3, and 4 Lmin, and compared with HF baseline values (no IARBP support). Increasing IARBP support augmented cardiac output and diminished LVEW. Nonmodulated IARBP support significantly diminished mean diastolic coronary flow (−49) and myocardial supply-demand ratio (−12) compared with HF baseline. Intra-aortic rotary blood pump flow modulation increased mean diastolic coronary flow (17) and myocardial supply-demand ratio (24) compared with nonmodulated IARBP (constant flow). Modulation and synchronization of IARBP support augmented coronary artery perfusion and myocardial supply-demand ratio in simulated clinical HF while also restoring end-organ perfusion and reducing LVEW. Implementation of IARBP support with flow modulation may prevent myocardial hypoxia and improve patient outcomes. However, even with flow modulation, IARBP support provides a smaller improvement in myocardial supply demand ratio compared to ventricular assist devices and intra-aortic balloon pumps.

A major limitation in the development of mechanical circulatory support (MCS) devices has been the lack of a clinically relevant, stable, and reproducible large animal chronic heart failure (HF) model. High mortality rates have been reported with large animal chronic HF models. In this study, methods of medical management to improve survival rate (SR) were investigated. Chronic ischemic HF (IHF) was induced in Jersey calves using a microembolization technique viafluoroscopy-guided injection of 90 m microspheres into the coronary vasculature. Animals were divided into 1) Control—multiple embolization procedures with conservative therapy (n = 9); 2) treatment group 1 (TG1)—single embolization procedure with moderately aggressive therapy (n = 8); and 3) TG2—single embolization procedure with aggressive medical management (n = 20). The groups were not randomized with data analyzed retrospectively. Mean SR, body condition score, body weight, hemodynamic, echocardiography, and histopathology indices were recorded up to 60 days postembolization. SR improved from 56 (Control) to 75 (TG1) and 90 (TG2) using an aggressive medical management regimen of analgesia, diuretics, beta-blockade, antiarrhythmics, vasodilators, and inotropes. These findings support the hypothesis that a single coronary microembolization procedure and aggressive medical therapy produces a clinically relevant chronic IHF model with a significantly higher SR than conservative medical therapy.

Ventricular assist devices (VADs) have been used successfully as a bridge to transplant in heart failure patients by unloading ventricular volume and restoring the circulation. An artificial vasculature device (AVD) is being developed that may better facilitate myocardial recovery than VAD by controlling the afterload experienced by the native heart and controlling the pulsatile energy entering into the arterial system from the device, potentially reconditioning the arterial system properties. The AVD is a valveless, 80 ml blood chamber with a servo-controlled pusher plate connected to the ascending aorta by a vascular graft. Control algorithms for the AVD were developed to maintain any user-defined systemic input impedance (IM) including resistance, elastance, and inertial components. Computer simulation and mock circulation models of the cardiovascular system were used to test the efficacy of two control strategies for the AVD: 1) average impedance position control (AIPC)—to maintain an average value of resistance during left ventricular (LV) systole and 2) instantaneous impedance force feedback (IIFF) and position control (IIPC)—to maintain a desired value or profile of resistance and compliance. Computer simulations and mock loop tests were performed to predict resulting cardiovascular pressures, volumes, flows, and the resistance and compliance experienced by the native LV during ejection for simulated normal, failing, and recovering LV. These results indicate that the LV volume and pressure decreased, and the LV stroke volume increased with decreasing IM, resulting in an increased ejection fraction. Although the AIPC algorithm is more stable and can tolerate higher levels of sensor errors and noise, the IIFF and IIPC control algorithms are better suited to maintain any instantaneous IM or an IM profile. The developed AVD impedance control algorithms may be implemented with current VADs to promote myocardial recovery and facilitate weaning.

Debate exists regarding the merits and limitations of continuous versuspulsatile flow mechanical circulatory support. To characterize the hemodynamic differences between each mode of support, we investigated the acute effects of continuous versuspulsatile unloading of the failing left ventricle in a bovine model. Heart failure was induced in male calves (n 14). During an acute study, animals were instrumented through thoracotomy for hemodynamic measurement. A continuous flow (n 8) and/or pulsatile flow (n 8) left ventricular assist device (LVAD) was implanted and studied during maximum support (∼5 L/min) and moderate support (∼2–3 L/min) modes. Pulse pressure (PP), surplus hemodynamic energy (SHE), and (energy equivalent pressure EEP/mean aortic pressure (MAP) − 1) × 100% were derived to characterize hemodynamic energy profiles during the different support modes. Standard hemodynamic parameters of cardiac performance were also derived. Data were analyzed by repeated measures one-way analysis of variance within groups and unpaired Student's t-tests across groups. During maximum and moderate continuous unloading, PP, SHE, and (EEP/MAP − 1) × 100% were significantly decreased compared with baseline and compared with pulsatile unloading. As a result, continuous unloading significantly altered left ventricular peak systolic pressure, aortic systolic and diastolic pressure, ±dP/dt, and rate × pressure product, whereas pulsatile unloading preserved a normal profile of physiologic values. As continuous unloading increased, the pressure-volume relationship collapsed, and the aortic valve remained closed. In contrast, as pulsatile unloading increased, a comparable decrease in left ventricular volumes was noted. However, a normal range of left ventricular pressures was preserved. Continuous unloading deranged the physiologic profile of myocardial and vascular hemodynamic energy utilization, whereas pulsatile unloading preserved more normal physiologic values. These findings may have important implications for chronic LVAD therapy.

The acute hemodynamic efficacy of an implantable counterpulsation device (CPD) was evaluated. The CPD is a valveless single port, 32-ml stroke volume blood chamber designed to be connected to the human axillary artery using a simple surface surgical procedure. Blood is drawn into the pump during systole and ejected during diastole. The acute hemodynamic effects of the 32-ml CPD were compared to a standard clinical 40-ml intra-aortic balloon pump (IABP) in calves (80 kg, n 10). The calves were treated by a single oral dose of Monensin to produce a model of diminished cardiac function (DCF). The CPD and IABP produced similar increases in cardiac output (6% CPD vs. 5% IABP, p> 0.5) and reduction in left ventricular external work (14% CPD vs. 13% IABP, p> 0.5) compared to DCF (p< 0.05). However, the ratio of diastolic coronary artery flow to left ventricular external work increase from DCF baseline (p< 0.05) was greater with the CPD compared to the IABP (15% vs. 4%, p< 0.05). The CPD also produced a greater reduction in left ventricular myocardial oxygen consumption from DCF baseline (p< 0.05) compared to the IABP (13% vs. 9%, p< 0.05) despite each device providing similar improvements in cardiac output. There was no early indication of hemolysis, thrombus formation, or vascular injury. The CPD provides hemodynamic efficacy equivalent to an IABP and may become a therapeutic option for patients who may benefit from prolonged counterpulsation.

The physiological benefits of pulsatility generated by ventricular assist device (VAD) support continue to be heavily debated as application of VAD support has been expanded to include destination and recovery therapies. In this study, the relationship between input impedance (Zart) and vascular pulsatility during continuous flow (CF) or pulsatile flow (PF) VAD support was investigated. Hemodynamic waveforms were recorded at baseline failure and with 50%, 75%, and 100% CF or PF VAD support for nine different Zart test conditions (combination of three different resistance and compliance settings) in a mock circulatory system simulating left ventricular failure. High-fidelity hemodynamic pressure and flow waveforms were recorded to calculate mean arterial pressure (MAP), Zart, energy equivalent pressure (EEP), and surplus hemodynamic energy (SHE) as metrics for quantifying vascular pulsatility. MAP and EEP were elevated with increasing resistance whereas SHE was reduced with increasing compliance. Vascular pulsatility was restored with increasing PF VAD support, but diminished by up to 90% with increasing CF VAD support. The nonpulsatile energy component (MAP) of the pressure waveform is dependent on resistance whereas the pulsatile energy component (SHE) is dependent on compliance. The impact of Zart and vascular pulsatility on patient recovery with VAD support warrants further investigation.