Search

Burkholderia glumae is a Gram-negative phytopathogenic bacterium known as the causative agent of rice panicle blight. Strain B. glumae PG1 is used for the production of a biotechnologically relevant lipase, which is secreted into the culture supernatant via a type II secretion pathway. We have comparatively analyzed the genome sequences of B. glumae PG1 wild type and a lipase overproducing strain obtained by classical strain mutagenesis. Among a total number of 72 single nucleotide polymorphisms (SNPs) identified in the genome of the production strain, two were localized in front of the lipAB operon and were analyzed in detail. Both mutations contribute to a 100-fold overproduction of extracellular lipase in B. glumae PG1 by affecting transcription of the lipAB operon and efficiency of lipase secretion. We analyzed each of the two SNPs separately and observed a stronger influence of the promoter mutation than of the signal peptide modification but also a cumulative effect of both mutations. Furthermore, fusion of the mutated LipA signal peptide resulted in a 2-fold increase in secretion of the heterologous reporter alkaline phosphatase from Escherichia coli. [ABSTRACT FROM AUTHOR]

Many microorganisms could naturally produce ( R, R)-2,3-butanediol (( R, R)-2,3-BD), which has unique applications due to its special chiral group and spatial configuration. But the low enantio-purity of the product hindered the development of large-scale production. In this work, a synthetic constitutive metabolic pathway for enantiomerically pure ( R, R)-2,3-BD biosynthesis was constructed in Escherichia coli with vector pUC6S, which does not contain any lac sequences. The expression of this artificial constructed gene cluster was optimized by using two different strength of promoters (AlperPLTet01 (P) and AlperBB (P)). The strength of P is twice stronger than P. The fermentation results suggested that the yield of ( R, R)-2,3-BD was higher when using the stronger promoter. Compared with the wild type, the recombinant strain E. coli YJ2 produced a small amount of acetic acid and showed higher glucose consumption rate and higher cell density, which indicated a protection against acetic acid inhibition. In order to further increase the ( R, R)-2,3-BD production by reducing the accumulation of its precursor acetoin, the synthetic operon was reconstructed by adding the strong promoter P in front of the gene ydjL coding for the enzyme of ( R, R)-2,3-BD dehydrogenase which catalyzes the conversion of acetoin to ( R, R)-2,3-BD. The engineered strain E. coli YJ3 showed a 20 % decrease in acetoin production compared with that of E. coli YJ2. After optimization the fermentation conditions, 30.5 g/L of ( R, R)-2,3-BD and 3.2 g/L of acetoin were produced from 80 g/L of glucose within 18 h, with an enantio-purity over 99 %. [ABSTRACT FROM AUTHOR]

To reduce dependence on petroleum, an alternative route to production of the chemical feedstock 2,3-butanediol (2,3-BD) from renewable lignocellulosic sources is desirable. In this communication, the genes encoding the pathway from pyruvate to 2,3-BD ( alsS, alsD, and bdhA encoding acetolactate synthase, acetolactate decarboxylase, and butanediol dehydrogenase, respectively) from Bacillus subtilis were engineered into a single tricistronic operon under control of the isopropyl β-D-1-thiogalactopyranoside (IPTG)-inducible P promoter in a shuttle plasmid capable of replication and expression in either B. subtilis or Escherichia coli. We describe the construction and performance of a shuttle plasmid carrying the IPTG-inducible synthetic operon alsSDbdhA coding for 2,3-BD pathway capable of (i) expression in two important representative model microorganisms, the gram-positive B. subtilis and the gram-negative E. coli; (ii) increasing 2,3-BD production in B. subtilis; and (iii) successfully introducing the B. subtilis 2,3-BD pathway into E. coli. The synthetic alsSDbdhA operon constructed using B. subtilis native genes not only increased the 2,3-BD production in its native host but also efficiently expressed the pathway in the heterologous organism E. coli. Construction of an efficient shuttle plasmid will allow investigation of 2,3-BD production performance in related organisms with industrial potential for production of bio-based chemicals. [ABSTRACT FROM AUTHOR]

Bacillus amyloliquefaciens strains FZBREP and FZBSPA were derived from the wild-type FZB42 by replacement of the native bacilysin operon promoter with constitutive promoters P and P from plasmids pMK3 and pLOSS, respectively. These strains contained two antibiotic resistance genes, and markerless strains were constructed by deleting the chloramphenicol resistance cassette and promoter region bordered by two lox sites ( lox71 and lox66) using Cre recombinase expressed from the temperature-sensitive vector pLOSS-cre. The vector-encoded spectinomycin resistance gene was removed by high temperature (50 °C) treatment. RT-PCR and qRT-PCR results indicated that P and especially P significantly increased expression of the bac operon, and FZBREP and FZBSPA strains produced up to 170.4 and 315.6 % more bacilysin than wild type, respectively. Bacilysin overproduction was accompanied by enhancement of the antagonistic activities against Staphylococcus aureus (an indicator of bacilysin) and Clavibacter michiganense subsp. sepedonicum (the causative agent of potato ring rot). Both the size and degree of ring rot-associated necrotic tubers were decreased compared with the wild-type strain, which confirmed the protective effects and biocontrol potential of these genetically engineered strains. [ABSTRACT FROM AUTHOR]

Lichenysin is a biodegradable surfactant with huge potential for recovering crude oil from the oil reservoir. The current production of lichenysin is made through fermentation from wild strain of Bacillus licheniformis, which is limited by low yield. The aim of this work was to improve lichenysin-producing capability of a wide strain B. licheniformis WX-02. Lichenysin produced from WX-02 was first extracted, purified, and identified. Through the substitution of the promoter of lichenysin biosynthesis operon, the mutants B. licheniformis WX02-P43lch, WX02-Pxyllch, and WX02-Psrflch were constructed with the constitutive promoter (P43), the xylose-inducible promoter (P), and the surfactin operon promoter (P), respectively. A consistent change trend was observed between lichenysin production and lchAA gene transcription, confirming the strength of the promoters as an important factor for lichenysin synthesis. Among the three mutants, WX02-Psrflch produced the highest lichenysin yield. The production by the mutant WX02-Psrflch was further improved with the optimization of the major medium components including glucose, NHNO, and NaHPO/KHPO. Under 30 g/L glucose, 5 g/L NHNO, and 80 mM/60 mM NaHPO/KHPO, the strain WX02-Psrflch produced 2,149 mg/L lichenysin, a 16.8-fold improvement compared to that of wild strain WX-02. [ABSTRACT FROM AUTHOR]

Glycerol has become a cheap and abundant carbon source due to biodiesel production at a large scale, and it is available for several biotechnological applications. We recently established poly(3-hydroxypropionate) [poly(3HP)] synthesis in a recombinant Shimwellia blattae strain (Heinrich et al. Appl Environ Microbiol 79:3582-3589, ). The major drawbacks of the current strains are (i) low poly(3HP) yields, (ii) low plasmid stability and (iii) insufficient conversion rates. In this study, we demonstrated the influence of alterations of the operon structure, consisting of 1,3-propanediol dehydrogenase ( dhaT) and aldehyde dehydrogenase ( aldD) of Pseudomonas putida KT2442, propionate:coenzyme A (propionate-CoA) transferase ( pct) of Clostridium propionicum X2 and polyhydroxyalkanoate (PHA) synthase ( phaC1) of Ralstonia eutropha H16. It was shown that S. blattae ATCC33430/pBBR1MCS-2:: dhaT:: pct:: aldD:: phaC1 synthesized up to 14.5 % (wt/wt) in a 2-L fed-batch fermentation process. Furthermore, we overcame the problem of plasmid losses during the fermentation period by engineering a carbon source-dependent plasmid addiction system in a triose phosphate isomerase knockout mutant. An assumed poly(3-hydroxyalkanoic acid) degrading activity of the lipase/esterase YbfF could not be confirmed. [ABSTRACT FROM AUTHOR]

In this study, a gfp-based novel markerless allelic exchange integration system was developed. By employing gfp gene and sacB gene as counter-selectable markers, an ortho-nitrophenol degradation operon ( onpABC gene cluster) was successfully inserted into the chromosome of meta-nitrophenol utilizer Cupriavidus necator JMP134. Through two rounds of recombination, the engineered strain (strain JMP134-ONP) was directly selected from the plate by fluorescence screening and has the ability to degrade both ortho-nitrophenol and meta-nitrophenol, simultaneously. This relatively simple and efficient method can be used as an alternative strategy of allelic exchange insertion for the application of metabolic engineering in various bacterial strains, complementary to existing gene knock-in procedures. [ABSTRACT FROM AUTHOR]

CYP153A6 is a well-studied terminal alkane hydroxylase which has previously been expressed in Pseudomonas putida and Escherichia coli by using the pCom8 plasmid. In this study, CYP153A6 was successfully expressed in E. coli BL21(DE3) by cloning the complete operon from Mycobacterium sp. HXN-1500, also encoding the ferredoxin reductase and ferredoxin, into pET28b(+). LB medium with IPTG as well as auto-induction medium was used to express the proteins under the T7 promoter. A maximum concentration of 1.85 μM of active CYP153A6 was obtained when using auto-induction medium, while with IPTG induction of LB cultures, the P450 concentration peaked at 0.6-0.8 μM. Since more biomass was produced in auto-induction medium, the specific P450 content was often almost the same, 0.5-1.0 μmol P450 g, for both methods. Analytical scale whole-cell biotransformations of n-octane were conducted with resting cells, and it was found that high P450 content in biomass did not necessarily result in high octanol production. Whole cells from LB cultures induced with IPTG gave higher specific and volumetric octanol formation rates than biomass from auto-induction medium. A maximum of 8.7 g octanol L was obtained within 24 h (0.34 g L h) with IPTG-induced cells containing only 0.20 μmol P450 g, when glucose (22 g L ) was added for cofactor regeneration. [ABSTRACT FROM AUTHOR]