Search

The pulp and paper making industry is looking for new main raw material based on its physical, chemical and morphological characteristics. Currently in this industry, bagasse is the most useful raw material in pulp and paper industry. The objective of this study is to determine its suitability for pulping. Acacia auriculiformis is a fast-growing tree normally found in Indonesia and Australia. Acacia auriculiformis leaf contains of cellulose, hemi-cellulose and lignin. The range of lignin content in Acacia auriculiformis is 19%-20%. The hemi-cellulose and lignin contents was removed by soda-pulping process using different concentrations as followed; 3%, 5%, 10%, 15% and 20%. In order to determine the optimum pulping conditions for Acacia auriculiformis craft paper, several tests were conducted such as apparent density, tear test, tensile strength test and moisture absorption. It was found that the Acacia auriculiformis fibre treated with 3% sodium hydroxide (NaOH) solutions gave good tear test of the paper. For apparent density test, the best concentration of NaOH used for treating Acacia auriculiformis pulping is at 15%. From the study, the optimum concentration of NaOH in treating Acacia auriculiformis fibre is at 5% for best result in tensile strength. Hence, from the overall tests, 5% concentration of NaOH is the optimum value. From the findings, Acacia auriculiformis fibre has a potential to be used in paper making and food packaging industry.

The coating process on food packaging paper is carried out to improve the food safety aspect from dangerous substance migration from food packaging into food. It can facilitate to increase its function and wide the potency of utilization. The coating materials commonly used are plastic and wax coatings. Chitosan as a natural polymer that has the binding properties both water and oil. Chitosan has polar and non-polar groups thus it is potential to be developed as a coating material for food packaging paper. The purpose of this study was to determine the physical-mechanical and antimicrobial properties of food packaging paper from oil palm empty fruit bunches pulp coated with chitosan. The parameters used were chitosan and pulp weight. The oil palm empty fruit bunch pulp was fibrillated with high speed blender then mixed with chitosan solution. The mixed solution was poured in the mold and dried in an oven at 60 °C for 24 hours. The results showed that increasing of chitosan content was coated paper increased physical and mechanical properties values. The more pulp content the higher the physical properties value, however the mechanical properties value tend to decrease. The antimicrobial activity of chitosan coated paper was evaluated by measuring the diameter of the inhibition zones. The results revealed that all tested samples showed growth inhibition zone againts to Escherichia coli and Staphylococcus aureus after 24 h incubation compared to commercial food packaging paper.

Severe Environmental problems arises across the world due to accumulation of paper waste as landfills large quantity of resources are being utilised by the construction sector, creating a huge demand for construction materials. This paper presents an experimental study carried out by utilising waste paper in concrete Bricks which is a new innovation composite material. An experimental study on compaction strength, weight, water absorption characteristics subjected to sun dried and water curing methods of casting were studied in details. It was observed that usage of paper in concrete has good strength, toughness, has reduction in weight of the brick considerably and also had a low thermal conductivity.

A paper battery is a 6 cm × 4 cm × 1 mm dimension battery that uses CuCl as a cathode, magnesium as an anode, and urine as an electrolyte. CuCl2 dan CuSO4 as used to synthesis CuCl was analyzed. A simple and cheap sandwiched fabrication model has been identified using the low-cost CuCl synthesis process. This paper battery has passed experimental testing and delivers the best power generation at 169,588 mW and continuously up to 4 hours. Voltage also measured and provided a stable voltage at least for 6 hours at 582.667 mV. Method 2 of using CuSO4, which has price lower than CuCl2 showed better power generation and stability.

Indonesia has targeted to reach 23% of renewable energy share by 2025. In order to meet the target, many researchers have focused on the explorations of renewable energy resources. One of the potential solutions to meet the target is the agricultural wastes, include corn cobs and areca nut fiber. In this study, the calorific value of corn cobs and areca nut fiber are tested. The corn cobs and areca nut fiber are collected from the farmers in Sumatera Utara province of Indonesia. In addition, the Paper waste is also tested. A bomb calorimeter of IKA C6000 is used to measure the energy content of the biomass. The results show that the calorific value of Corn cobs and Areca nut fiber is 5573 Cal/g and 4946 Cal/g, respectively.By using the average yearly production of Corn and Areca nut, these calorific values similar to 4,539 TOE and 4,653 TOE, respectively. If the potency can be used to replace the coal as an alternative fuel, this potency will reduce the Greenhouse gas (GHG) emission. The potency of mitigation GHG by replacing Corncob and Areca nut fiber are 18,306 and 18,491 ton of CO2e.

One of the relatively inexpensive alternative energy sources in terms of production and relatively environment friendly was the development of bioethanol from urban wastes that contain many lignocellulose such as paper waste. This study characterizes the composition of cellulose, hemicellulose and lignin in blank HVS paper, inked HVS and newspaper. The results showed the predominate cellulose (49-60 %) while the lignin concentration was very low due to the removal of colors (lignin) in the manufacturing process. The experiments continued with synthesis of bioethanol through Simultaneous Saccharification and Fermentation (SSF) process. A combination of enzymes (Cellulase + Cellobiase) in 1:1 weight ratio and Saccharomyces cerevisiae was used for hydrolysis and fermentation in the SSF process. Paper waste from newspapers, inked HVS, and empty HVS papers were used as raw materials. The initial pH of SSF in the column was at pH 5. Variation of enzyme concentration was carried at 0.2, 0.3 and 0.5 g. The SSF process was carried out at incubation time of 6, 12, 24, 36, 48, 72, and 96 hours. The ink affected the concentration of bioethanol produced. In this study, the best bioethanol content was produced by inked HVS and Newspapers at 0.5 grams of enzyme with a concentration of 1531 and 1111 ppm, respectively.

We have developed a flexible reduced graphene oxide (RGO) temperature sensor on filter paper based cellulose substrate using vacuum filtration method. One of the most commonly used synthesized methods for RGO thin films is vacuum filtration process. It has several advantages such as simple operation and good controllability. The structural analysis was carried out by FE-SEM, in which the surface morphology images confirm the formation of RGO nanostructures on the filter paper substrate. It was observed that the pores of the filter paper were completely filled with the RGO material during the filtration process, subsequently the formation of continuous RGO thin films. As a results, the RGO films exhibits a piezoresistive property. The resulted RGO based films on the filter paper reveals the semiconducting behavior having sensitivity of 0.278 Omega/degrees C and negative temperature coefficient (NTC) about -0.00254 Omega / Omega /degrees C. Thus, we demonstrate a simplified way for the fabrication of RGO films on filter paper that possesses better and easier measurable macroscopic electrical properties. Our approach is for easy way of electronics, cost-effective and environment friendly fabrication route for flexible conducting graphene films on filter paper. This will enable for the potential applications in flexible electronics in various fields including biomedical, automobile and aerospace engineering.

Leachate wastewater from pulp and paper industry is known for containing various types of heavy metals such as Cd (Cadmium), Ba (Barium) and Cu (Cuprum). The existence of heavy metals that accumulates and eventually exceeds certain threshold concentrations will cause environmental pollution, therefore it is necessary to conduct wastewater treatment to eliminate or at least reduce the heavy metal content in industrial wastewater. One of the most commonly used wastewater treatment method is using adsorbent, this study uses adsorbent made from the mixture of clay, zeolite and activated carbon formed into ceramic balls with ± 0.5 cm diameter. The ratios of the mixture of clay, zeolite and activated carbon are 6:3:1; 6:2,5:1,5; 6:2:2; 6:1,5:2,5 and 6:1:3 with variations of contact time 30, 60, 90, 120 and 150 minutes. The most favorable concentration reduction of heavy metals occurred at the longest contact time of 150 minutes at 6:3:1 adsorbent ratio, Cd concentration decreases from 0.65 mg/L to 0.03 mg /L, Ba concentration decreases from 0.86 mg/L to 0.04 mg/L and Cu concentration is from 0.6 mg/L to 0.02 mg/L. These prove that the ceramic zeolite/carbon-ceramic composite adsorbent can be an alternative to treat wastewater containing heavy metals derived from the pulp and paper industry.

Protective factors are the features within the person or circumstances within the family, school or community that aid someone to handle life challenges successfully. This conceptual paper will focus on the roles of several protective factors which are locus of control, self-esteem, resilience, and religion towards the intention of drug use among young people. Referring to the proposed model, the following hypotheses have been formulated, that there are significant relationships between protective factors and the reduced intention of drug use, locus of control, self-esteem, resilience, as well as religion factor will all positively influence reduced intention of drug use. A quantitative approach will be undertaken, which is a survey. In the context of this study, the population will be group of young people who are in primary or secondary schools.

Recycled paper mill effluent (RPME) contains high concentrations of organic matters and total solids, and therefore requires proper treatment prior to discharge. There is a lack of experimental data available on the biodegradation of solids contents of RPME and digested sludge in anaerobic reactors. In this study, the treatment of RPME was studied using five compartments modified anaerobic inclining-baffled reactor (MAI-BR). The compartmental profiles of TSS, VSS, TDS and lignin contents, and floc size were investigated at different influent chemical oxygen demand concentration (CODin) from 1,000 to 4,000 mg/L, and hydraulic retention time (HRT) from 3 to 1 days (corresponding to organic loading rate (OLR) from 0.33 to 4 g/L day). The results showed that the contents of TSS, VSS and lignin were the highest at Compartment 1 (14,818-32,130 mg/L), (6,772-20,548 mg/L) and (7-227 mg/L), and gradually decreased towards Compartment 5 (627-8,518 mg/L), (281-6,145 mg/L) and (7-22 mg/L), respectively. Conversely, the content of TDS was low at Compartment 1 (508-712 mg/L) and slightly increased towards Compartment 5 (531-836 mg/L). Throughout 126 days, the floc size at Compartmental 1 was increased from 104 to 731 µm, similarly for other compartments. These results concluded that Compartment 1 played a major role in the operation of MAI-BR treating RPME.Recycled paper mill effluent (RPME) contains high concentrations of organic matters and total solids, and therefore requires proper treatment prior to discharge. There is a lack of experimental data available on the biodegradation of solids contents of RPME and digested sludge in anaerobic reactors. In this study, the treatment of RPME was studied using five compartments modified anaerobic inclining-baffled reactor (MAI-BR). The compartmental profiles of TSS, VSS, TDS and lignin contents, and floc size were investigated at different influent chemical oxygen demand concentration (CODin) from 1,000 to 4,000 mg/L, and hydraulic retention time (HRT) from 3 to 1 days (corresponding to organic loading rate (OLR) from 0.33 to 4 g/L day). The results showed that the contents of TSS, VSS and lignin were the highest at Compartment 1 (14,818-32,130 mg/L), (6,772-20,548 mg/L) and (7-227 mg/L), and gradually decreased towards Compartment 5 (627-8,518 mg/L), (281-6,145 mg/L) and (7-22 mg/L), respectively. Conversely, t...

The paper is focused on investigation of the nature and size of cellulose fibers in the structure of stabilizing additives for stone-mastic asphalt concrete, as well as on determination of fibers retention capacity based on their geometric parameters. To obtain the results a scanning electron microscope JSM-6510LV was used, with the help of which 15 to 20 photomicrographs were obtained. It was found out that in all inspected samples of stabilizing additives over 80% of pulp and paper fibers have a band structure with filaments from 0.56 to 1.4 micrometer in length. The fiber thickness in all cases slightly varies within the range of 0.008 to 0.021 micrometer. For a more detailed analysis of the additives the X-ray microanalysis was carried out. The results showed that in all cases the component distribution of the chemical elements present in the additive is inhomogeneous and has two fundamental differences in the oxygen (O) and carbon (C) content. ARMIDON additives contain more than 79% carbon (C) and just 6-13% oxygen (O). VIATOP 66 and SD-1 additives contain up to 61% carbon (C) and up to 48% oxygen (O). Tests to determine the runoff of the organic binder showed that additives with cellulose fiber filaments up to 0.6 micrometers in length hold bitumen worse than additives with cellulose fiber filaments 1.4 micrometers in length.The paper is focused on investigation of the nature and size of cellulose fibers in the structure of stabilizing additives for stone-mastic asphalt concrete, as well as on determination of fibers retention capacity based on their geometric parameters. To obtain the results a scanning electron microscope JSM-6510LV was used, with the help of which 15 to 20 photomicrographs were obtained. It was found out that in all inspected samples of stabilizing additives over 80% of pulp and paper fibers have a band structure with filaments from 0.56 to 1.4 micrometer in length. The fiber thickness in all cases slightly varies within the range of 0.008 to 0.021 micrometer. For a more detailed analysis of the additives the X-ray microanalysis was carried out. The results showed that in all cases the component distribution of the chemical elements present in the additive is inhomogeneous and has two fundamental differences in the oxygen (O) and carbon (C) content. ARMIDON additives contain more than 79% carbon (C) and ju...

Here, a small analytical device was fabricated on both nitrocellulose membrane and filter paper, for the detection of biotinylated double-stranded DNA (dsDNA) from 1 nM. Zif268 was utilized for capturing the target DNA, which was a zinc finger protein that recognized only a dsDNA with specific sequence. Therefore, this detection platform could be utilized for PCR result detection, with the well-designed primers (interpolate both biotin and Zif268 binding sequence). The result of the assay could be recorded by a camera-phone, and analyzed with software. The whole assay finished within 1 hour. Due to the easy fabrication, operation and disposal of this device, this method can be employed in point-of-care detection or on-site monitoring.

Synthesis of C-Dots from waste paper has been successfully created. A total of 5 grams of waste paper is mixed with 40 mL aquades, 30 mL H2SO4 and 50 mL NaOH 2 M. A precursor solution is prepared by adding urea in 20 ml of material. Synthesis of C-Dots done by heating the precursor hydrothermally using a furnace with three conditions, namely with 1-4 grams of urea, 20-50 minutes of synthesis time, and 150-300°C of temperature. In a variation of urea and time, the temperature is controlled at 300°C. In a variation of the time and temperature, urea is controlled at 3 grams. In a variation of the urea and temperature, time is controlled for 30 minutes. The maximum absorption C-Dots generated on the various of amount urea, temperature, and synthesis time in the range of 360-600 nm. The width of the absorbance area was increased by adding 1-3 grams of urea and were decreased when urea is added 4 grams or more. The absorbance peaks of C-dots decreases with increasing temperature synthesis. Meanwhile, an increasing of synthesis time does not affect to the width of the absorbance spectra. It precisely causes decreasing of peaks of the absorbance spectra. The functional groups present on the surfaces of C-dots can be identified by the presence of specific peaks in their FTIR spectra, i.e. N–H, C=C, C–N, and C–C at various urea, N–H, C=O, C=C and C–O at temperature and synthesis time.Synthesis of C-Dots from waste paper has been successfully created. A total of 5 grams of waste paper is mixed with 40 mL aquades, 30 mL H2SO4 and 50 mL NaOH 2 M. A precursor solution is prepared by adding urea in 20 ml of material. Synthesis of C-Dots done by heating the precursor hydrothermally using a furnace with three conditions, namely with 1-4 grams of urea, 20-50 minutes of synthesis time, and 150-300°C of temperature. In a variation of urea and time, the temperature is controlled at 300°C. In a variation of the time and temperature, urea is controlled at 3 grams. In a variation of the urea and temperature, time is controlled for 30 minutes. The maximum absorption C-Dots generated on the various of amount urea, temperature, and synthesis time in the range of 360-600 nm. The width of the absorbance area was increased by adding 1-3 grams of urea and were decreased when urea is added 4 grams or more. The absorbance peaks of C-dots decreases with increasing temperature synthesis. Meanwhile, an increas...