Search

Pores and weak bonding are the inherently drawbacks for thermally sprayed coating. Laser beam is an attractive approach to remelt thermal spray coating for obtaining fully dense coating with metallurgical bonding with substrate. However, defects of holes or cracks are highly inevitable with unmatching remelting processing parameters. In this work, a thermally sprayed Cr3C2-NiCr cermet coating by high velocity oxygen fuel spraying was post-processed by laser remelting with a series of varying beam energy densities from 37.5 J/mm2 to 225 J/mm2. The defect evolution was investigated by both experimental and numerical simulation methods. Large holes and through-thickness cracks were typical defects observed in the remelt coating by optical microscopy. The experimental results show that remelting-induced defects evolve into three stages with laser energy density. The effect of energy density on remelt structure was further verified with the temperature field by numerical simulation with ABAQUS code. The stress field interpreted the crack formation at periodical formation sites. The results on the defect evolution shed light on obtaining functional coatings for industrial applications.

The mechanical properties, including the compressive strength, flexural strength and adhesion strength of the rapid setting conventional and polymer-modified waterproof mortars are systematically compared in this paper. The polymer modification is demonstrated to increase the flexural strength and adhesion strength of the rapid setting waterproof mortar whereas it reduces its compressive strength.

Contact resistance is one of the key parameters of main bus bar. The bus performance is decided by the value of Contact resistance. By test of the typical rectangular copper bus-bar, it is analyzed that the effects of force on DC contact resistance. The results show that metal surface contact resistance decreases with the increment of pressure. The resistance is mental nature property, which is determined by material’s performance. At the same time the effect of contact distance is studied in detail.

We present a detailed study on near-infrared (NIR) reflection spectra of Cu nanowire arrays (NWAs) which are embedded in porous anodic alumina oxide templates and with pore diameters from 35 nm to 80 nm. We find that the NIR reflection of these samples is out of the frequency regime for surface-plasmon resonance induced by intra-and inter-band excitations. However, the intensity of the NIR reflection of Cu NWAs depends strongly on sample parameters and temperature. The measurements are carried out at temperatures setting to be 4 K, 77 K, 200 K, and at room temperature. The optical response of the Cu NWAs in NIR bandwidth is attributed to localized surface-plasmon oscillations and the NIR reflectance increases with temperature up to room-temperature. The physical mechanisms behind these interesting findings are discussed.

This paper investigated the damage degree and damage mechanism of aluminum sandwich plate subjected to blast loading by using numerical simulation method. Finite elements models of aluminum foam sandwich plates were established. The distortion and damage pattern of the sandwich plate under different masses of detonator were got by using LS-DYNA to simulate the destructive effect of shock wave and detonation product against sandwich plate. The results showed that the maximal deflection and overloading of the sandwich plates were different because of the changing of mass of detonator. This paper could provide some reference for the designing of sandwich structures.

This article focuses on research into thermal shock fatigue resistance and oxidation resistance of as-cast ferritic nodular iron. The results show that the number of cycles required to crack nodular iron under the action of thermal stress is significantly higher than that of grey cast iron, and the rate at which cracks spread is lower compared with that of grey cast iron. When graphite is transformed from flakes into nodules, its decreased connectivity impedes the flow of oxygen during oxidization, thereby improving its oxidation resistance.

The soil column was structured to simulate the sunken lawn and three processes were simulated, including rainfall and runoff process, surface erosion and vertical infiltration process, pollutant migration and transformation process. Results show that sunken lawn is a sink and has significant effects for stormwater pollution. The overall reduction rates of CODCr, TN and ammonia is 71.01±1.75%, 69.00±1.78%, and 64.39±1.84% respectively. The reduction effect is related to the pollution load, hydraulic loading and antecedent dry period.

Through the different rolling and normalizing methods to study the variation of microstructure and mechanical properties of eight groups of steels ,based on the low carbon micro alloy steel as the research object, The results show that, the main structure of steel are ferrite, bainite and a small amount of M-A island group, and granular bainite is helpful to improve the test fire resistance steel; with the increasing of normalizing temperature, the ratio of YS increased gradually, the test steel has high good fire resistance at 790 °C; the faster the cooling speed after rolling, has better fire-resistant .

Oil and natural gas are very important. As reservoir geological phenomena have characteristics of complexity and nonlinearity, this paper presented a new approach of case-based reasoning with GIS to oil-gas reservoir comprehensive mapping, to which the characteristics of geological phenomena and the spatial relations among them are much considered, the reasoning is based on the attribute similarity reasoning and the spatial similarity reasoning. Experiments to the east region adjacent to Sulige gas field in north China were carried out. The results show that this approach is effective and much efficient, and it may have certain universality to similar problems or phenomena.

To study the effect of Angelica keiskei chalcone (AC) on microvessel density (MVD) and vascular endothelial growth factor (VEGF) expression on mice hepatocarcinoma cells. Fifty mice were inoculated with hepatocarcinoma H22 cells and divided into 5 groups. Group one to three were administered orally with AC by 5, 25 and 50 mg/kg/d, respectively. Group four was given Endostar 4mg/kg/d by intraperitoneal injection and tumor control group (group five) was given with normal saline. All mice were sacrificed after 10 days. The proliferation activity of hepatocarcinoma cells was determined by methy tetrazolium (MTT) assay, and the levels of the MVD and VEGF protein expression were detected by immunohistochemistry method. The AC inhibitory rates for tumor size were 4.20%, 30.47% and 39.42% at AC treatment dose of 5, 25, and 50 mg/kg, respectively. The average MVD count was 14.2, 11.2 and 8.5 at treatment dose of 5 mg/kg, 25 mg/kg and 50 mg/kg AC, respectively. The protein levels of VEGF in mice treated with 25 mg/kg and 50 mg/kg AC were significantly decreased. The results showed that AC could inhibit tumor angiogenesis effectively and the inhibition mechanism might be associated with the down-regulation of VEGF.

With more and more photovoltaic systems connected to the grid, a strategy for grid-connection control is proposed. The topology of PV inverter and photovoltaic inverter and the active and reactive power decoupling control of photovoltaic system are analyzed. The feasibility and effectiveness of the strategy for grid-connection control is verified by simulation and experiment by the case on the RTDS.

With many grid-connected wind farms of Doubly-fed Induction Generator (DFIG) type taking the palce of conventional synchronous generators, the frequency control ability of the system will decrease. But the existing control strategy based on maximum wind power tracking of DFIG can not response to the deviation of the system frequency. This paper proposes a new hybrid frequency control strategy based on the research of the frequency response to the doubly fed induction wind turbine curves switching inertia control loop and the ability for the pitch angle control participating in the system primary frequency modulation. The strategy reduces the initial rate of change and the steady state error of system frequency with the combined action of the curves switching inertial control and pitch frequency control. Finally, the simulation results of the two areas with four generators validate the effectiveness of the strategy.

In this paper, the effect of nitric oxide (NO) on the secondary metabolites of Taxus chinensis var. mairei under elevated UV-B radiation was studied. The 5-year-old seedlings were used as test materials. The sodium nitroprusside (SNP) was as the NO donor and Carboxy-PTIO potassium salt (cPTIO) as the NO scavenger. The results showed that the SNP, UV, UV-B+SNP treatments significantly increased the contents of photosynthetic pigments (pa, chlorophyll b, carotenoid and total chlorophyll exhibited CK < cPTIO < UV-B+cPTIO < UV-B < SNP < UV-B+SNP. SNP, cPTIO, UV-B, UV-B+SNP and UV-B+cPTIO significantly increased the concentrations of flavonoids, condensed tannins, total phenolics and taxol (p

In order to enhance the quality of iron concentrate from magnetic separation, reverse-flotation technology is often applied in iron ore dressing plant. However, this technology has disadvantages in operating cost, energy consumption and environmental protection (Zhao Chunfu, Wu Jianghua &Wang Hui ,2005). Developing innovative equipment to process magnetite ore more-effectively is a way to get rid of these disadvantages of reverse flotation and improve the quality of iron concentrate. This paper describes the development of Complex Flashing-Field Magnetic Cleaner, a new kind of equipment based on the principle of combination of separation in magnetic field and separation in gravity field (Hao Shuhua & Jiang Wenli,2002). This innovative equipment possesses a tailor-made magnetic system and has the characteristics of a magnetic field which can strengthen the formation of magnetic agglomerations and the dispersion of gangue minerals to improve the quality of separation. The automatic control system developed specifically for this equipment can further increase the accuracy of separation and stabilize the process. Test results showed that this equipment is reliable in operation, economically beneficial and it has large potential of application.

Direct shear tests by laboratory to study the red sandstone aggregate mixture under the action of water intensity decay law, got red sandstone aggregate mixture, fill high subgrade compaction experimental study, tests showed that dynamic compaction compacted earth and rock mix fill embankment feasible, Rayleigh Wave test results show that the effect of dynamic compaction compaction good.

Aimed at the frequency gas accident of coal mine, we designed a coal mine gas monitoring system based on Arduino microcontroller. The MQ-4 gas sensor was used to collect gas concentration, wireless ZigBee was used to transfer data of gas concentration to PC. The system can display gas concentration real-timely by LCD and use SD card to store the data. The system will send out sound and light alarm when the gas concentration overruns. Industrial tests have been carried out in Wuyang coal mine. Results show that gas monitoring system can well adapt to environment of underground coal mine and the measurement is accurate. The system is real-time monitoring and early warning. It has the characteristics of low power consumption, low cost, wireless, good market prospect.

External trajectory equations of a certain cluster warhead were established according to the analysis of force during the motion process. The distribution on ground and some related motion parameters were got by MATLAB to solve the external trajectory equations. The influence of some factors on the distribution and terminal motion parameters were researched. The results show that the dispersion height and dispersion velocity are the most important factors. This paper can provide some reference for the research on the distribution of cluster warhead and determining operational scheme.

In this study, with regard to the differences of formation stage and physicochemical properties for different high organic soft clay layers, a series of laboratory tests have been carried out to evaluate the mechanical properties of high organic soft clay in Northeast China. The conventional high-pressure consolidation and strain-controlled triaxial shear tests have been carried out to measure the compression and shear strength of high organic soft clay which formed in different ages. Furthermore, the comparisons of stress-strain relations between undisturbed and remoulded high organic soft clay samples under the confining pressure of 300kPa reveal the significant differences in compression and shear strengths of high organic soft clay at different depths, which can be interpreted by the differences in the degree of decomposition of the soil. The test results show that the degree of decomposition of high organic soft clay greatly depend on its formation stage at different depths, which is deemed to determine the mechanical properties. This study will provide a good guide to civil engineers on the constructions of the foundation.

In this paper, the self-curable unsaturated polyester was put forward as a new solution to air pollution problems caused by the cross-linking monomer’s volatilization in unsaturated polyesters (UP) industry. Two kinds of unsaturated polyesters with the vinyl double bonds at the side chain were synthesized with Itaconic acid (IA) or Itaconic anhydride (ITA) as raw materials. The first one was prepared with IA, isophthalic acid and propylene glycol (IPP-UP), and the second one was synthesized with glycidol (GL) and ITA (IG-UP). Investigation demonstrates that the latter UP resin could be self-cured through the nucleophilic addition reaction of hydroxyl groups with double bonds or the free-radical homopolymerization of double bonds when they were heated without cross-linking monomers. However, the former couldn’t. Factors on self-crosslinking activity and crosslinking mechamism of pendant vinyl bonds from IA or ITA were explored.1H-NMR and FT-IR were used to characterize.

The remote monitoring system of elevator is an important tool to improve the service quality of safety operation of elevator. This paper studies the elevator monitoring system based on Zigbee, which uses MCU to control the operation of elevator model, transmits operation informations of the elevator model to the PC monitoring system with information transmission module of Zigbee, and displays and queries basic informations and operation status informations of elevator. The communication of the Zigbee module and MCU needs to convert the voltage value of transmission signal. In this paper, the design of remote monitoring system of elevator based on Zigbee has certain reference significance for the research on the elevator remote monitoring system.

Heavy metal pollution has raised a lot of concerns because of its bioaccumulation and non-degradability. A variety of methods have been applied in removal of heavy metals. This paper focused on the method of biosorption using biopolymer-based adsorbents in removing heavy metals from waster water. Cellulose and chitin/chitosan are abundant in supply and contain reactive functional groups. Cellulose-based adsorbents prepared from direct chemical modification or graft copolymerization are proved to show chelating ability to bind heavy metals. Chitin-and chitosan-based adsorbents have improved mechanical strength and better resistance to chemical conditions after physical or chemical modification. The regeneration and reusability of biopolymer-based adsorbents were also discussed in this paper.

MnxZn1-XO Crystal was synthesized by hydrothermal method in this work.The experimental parameters for hydrothermal synyhesis were:Mineralizer concentration 3mol•L-1KOH, the fill factor 35%, temperature 430°C, Zn(OH)2 doped with MnO2 as precursor, and the reaction time 24 hours. The Mn concentration in crystal was determined by X-ray EDS. The atomic percentage of Mn in crystal increases as the concentration of MnO2 in precursor increased. The maximum atomic percentage for Mn is over 2%. The morphology shows characteristics of hexagonal prism of pure ZnO crystal. The exposed faces are hexagonal faces m｛10 0｝, hexagonal cone faces p｛10 1｝, negative polar faces ｛000 ｝and positive polar faces｛0001}. The diameters of the crystals are 50-200μm，the heights are 20-100μm.

In this paper, we propose a method of peak period pricing to alleviate peak period crowding on the transit vehicles and the platforms. We expanded the route network into a time-expanded network based on the transit schedule, so the dynamic transit assignment is transferred into static transit assignment. Congestion coefficient is used to express the crowd in transit vehicles. In order to reach the goal of both government and the travelers, we establish a bi-level programming model.

In this paper, the hygroscopic properties of three different gauze, that is common medical gauze, absorbable carboxymethyl gauze and absorbable oxidized gauze, were compared, and the kinetic analysis were studied. The results showed that, at 298K and RH80%, the moisture absorption rate of the three kinds of gauze follows the order of absorbable carboxymethyl gauze > absorbable oxidized gauze > common medical gauze. The moisture absorption kinetic analysis of the three kinds of gauze indicated that the second-order model proposed fits experimental data well with the correlation coefficient greater than 0.999.

University educational management system is the core part of digital campus, this paper uses Oracle 11g database to study the educational management system, Oracle database performance directly impacts on the performance of management system, so the Oracle performance optimization is more and more attention to, the database performance optimization begins from the database design stage, through the database deployment stage and SQL realize process's optimization, to realize university educational management system Oracle database performance optimization goals.

In this paper, the exothermal efficiency and exothermal rate were employed to evaluate and optimize the composition of the self-heating material, and the effects of each component were discussed. The final optimized composition as below: reduced iron powder (20%), potassium permanganate (60%), sodium chloride (10%), activated carbon (10%). Under the optimized conditions, the temperature of this self-heating material could up to 100 °C within 2 min and maintain for 20 min, which should be suitable for flameless fast food self-heating or providing heat source for physiotherapy equipment in the medical field.

Methanol-water as solvent, transition metal Y-type zeolite as catalyst, L-lysine was synthesized laminin. Explores the methylation process factors, and the structure of the compound by IR, NMR and elemental analysis were characterized.

The scrambled watermark is embedded in DCT coefficients of low-frequency sub image with the Brightness Component of original color image after lifting wavelet transformation. Before embedding the watermark, the image confusion method is used to eliminate the space correlation of the pixels and improves the security and robustness. The results showed that the algorithm is easy to carry out with the real-time request of video watermarking.

Impedance of power line channel is the most important factor for power line communication. All kinds of household appliances randomly connect or disconnect from the network, which give rise to impedance variation on power line channel. The mismatch of impedance would reduce the performance of the signal transmission. The power network is mixed with lines and loads. In order to investigate the main factors that affect power network impedance, this paper proposed a method to measure the impedance of active household appliances. Some household appliances are measured with this method, and the result shows that this method can measure the impedance effictively, which helps the study on the impedance charicteristics.

Both maximum entropy method and Particle swarm optimization (PSO) are common threshold segmentation methods which have been used not only in image segmentation, but also in multi-threshold segmentation. Maximum entropy method is time-consuming, PSO may easily get trapped in a local optimum. In view of this concerning issue, we propose the PSO and maximum entropy are combined to make improvements on the PSO introduced in expansion model and opposition-based module. The objective functions of the maximum entropy as well as the PSO are obtained, which have improved to optimize them and search the optimal threshold combination, to achieve multi-threshold image segmentation. The results demonstrate that the new algorithm improved the segmentation speed and enhanced the robustness. And the optimizing results are stable.

Further excavation is extraordinary significant to the sustainable development of mine. For the rock slope, three-dimensional geostress in the deep mining area are presented complex and high, which were caused by previous excavation. Also, it is important to obtain the accurate geostress in mining area, which is the necessary precondition for determining the remaining ore mining scheme and the slope stability. In this paper, based on the in-situ geostress monitoring date, a 3D numerical model alongside the physical dimensions was built in finite element software FLAC3D, to accept the constitutive parameter and monitoring data, to predict the 3D stress and displacement distributions and detail failure information, to estimate stability of mining area.

Many system administrators would agree that, had it not been for hash tables, the simulation of sensor networks might never have occurred. Given the current status of real-time epistemologies, researchers compellingly desire the development of write-back caches, which embodies the confirmed principles of hardware and architecture. We propose a system for digital-to-analog converters, which we call StelaLoma. Even though it at first glance seems unexpected, it is derived from known results.

The network provides a convenient platform for the information communication, but to some extent, increases the information asymmetric of the network green-consumption. Based on the theory of information asymmetric and the behavior of the network green-consumption, the characteristics of college students' network green-consumption behavior in the Yangtze delta region are researched, and the hypothesis model is put forward of the influence factor of the information asymmetry. The on-the-spot investigation is carried on based on the Yangtze delta region of college students' network green-consumption. Based on the data collection, sorting and analysis, the assumed conclusions of the model are verified. A series of measures are put forward such as establishing a college student consumers union, raising herd consumer behavior consciousness and following the consumption behavior of the brand.

To simulate arbitrary three dimensional models, this technology of triangular polyhedron 3D human-computer interaction modeling was proposed. Achieving the technology has following three steps. Firstly, the coordinates of 3D nodes were projected onto the plane by the method of 3D geometric transformation. Then, this information which was made up of triangles and sides and nodes was picked up by 3D picking methods. Finally, the technique of rubber membrane was used to modify the nodes of triangles, and the 3D modification was achieved by means of anti-transformation. Moreover, the method of global and local mesh encryption was also designed to modify 3D topology structure, which was aimed at better simulate complex 3D models. This technology combined geophysical forwarding compute and formed the method of data-interaction simulation, which provided a means of visualization for geophysical data interpretation.

The government purchasing system started late in China. Based on the investigation of the present situation and connotation of China’s government green purchasing system, the paper analyzed the existing problems, which reflect that the performance standards of the government green purchasing values micro economic benefits, the unsound of the price system, the imperfect of the relevant laws and regulations, etc .

This paper focuses on the high transportation costs problem of the finished vehicle existing in the current vehicle logistics industry, which results from the inappropriate choice of the transport mode. Firstly, we establish a 0-1 programming model to select the integrated transportation mode quantitatively; Secondly, we solve the model by searching method which based on time constraint and capacity constraints; Finally, a case about the selection and optimization of the finished vehicles’ transportation mode in Anji Automotive Logistics Co.,Ltd are introduced to verify the model. The case results indicate that in the premise of meeting the requirement of time, the integrated transportation can greatly reduce the total transportation costs, which have significant implications for future reference in the choice of finished vehicle transportation.

A simple and non-toxic way was employed to fabricate electrical conductive TiO2materials based on a chemical reduction process here. Glucose was selected as a reductant to reduce AgNO3to obtain Ag-modified TiO2nanoparticles. The properties of the nanoparticles were characterized by XRD, TEM, and fourpoint probe resistivity meter. The results show that the TiO2was successfully modified by Ag nanoparticles, and the major crystalline phase of TiO2in the Ag-modified TiO2composite is anatase phase. The size of Ag increased with the AgNO3concentration increasing. Compared with pure TiO2, the Ag modified TiO2has a higher electrically conductive. In principle, it is expected to be a general and versatile approach to increase the conductivity of insulator or semiconductor.

Based on the special circumstances of public safety at the railway station region, the risk assessment index system of public safety in this area is built. Analytic Hierarchy Process is selected as the method of decision making and comprehensive assessment. Taking the characteristics and pattern of historic development of the public safety situation in Xi’an railway station region, the rationality of index weights is verified. Then, the risk assessment of public safety in Xi’an railway station region is conducted through expert investigation and grading. The results show that the system security level of Xi’an railway station region is grade II, the evaluation scores of B1, B2 and B3 are 83.5, 84.4 and 87.8 respectively, the indexes of index layer whose system security level in grade I contain C9, C14, C23, C24, C29, C30, C32 and C35.

The complicated motion of the gyroscope includes the rotation, the precession, the nutation and the sliding motion which are coupled, and it is affected by the lash-force by the whip. Taking the gyroscope which is moving stably as the research subject, according to the motion characteristics of the gyro’s rotation and precession, the gyro is assumed to be the two-force bar, and the coupled relationship of the gyroscope is analyzed quantitatively. The three-dimensional complicated motion in the different categories is analyzed. The nonlinear differential equations in the different categories is derived and linearized by the minor variables method, and then the three-dimensional motion equations on the rotation, precession, nutation and slipping of the gyroscope in the different categories is established. Take the big gym gyroscope as the example, the influence of the force, time and position of the whip on the motion state of the gyroscope is analyzed in detail, and provides the basis for the design of the gyroscope.

Using the analysis techniques of polarizing optical microscope and electron probe, mineral composition, ore texture and structure and the occurrence of Au in the primary ore are studied. The research shows that the main ore minerals in the ore include realgar, pyrite and arsenopyrite etc. Sulfur-stibarsen is the main carrier of Au, and is the major associated mineral of realgar, surrounded mainly by realgar, and partly is the associated mineral of arsenopyrite. The existence of visible gold and microscopic gold in the ore of this mining area can be excluded, and the gold might exist mainly in the form of inclusion gold, which is the so-called “nanoAu”.

In order to exactly master effect of uranium material’s heat power on safety and reliability of nuclear weapon, weapon-grade uranium(WgU) and depleted uranium(DU) were regarded as research object in this paper. According to their component, decay heat power of WgU and DU per kilogram was calculated through dynamic decay cascade and decay law of uranium. Decay heat power of WgU and DU was respectively 1.8152 and 0.4075 milliwatt per kilogram. Main nuclide influencing on decay heat power of WgU and DU is uranium-234(U-234).

In order to phytoremediation the soils contaminated by arsenical chemical weapons abandoned by Japan at some region of Jilin Province and ready for the estimate of the ecological safety, this paper analyzed organic species in soil with GC-MS, disscussed extraction and testing of inorganic arsenic in soil with hydrochloric acid, studied species of arsenic in soil such as available forms, valence state, and combined state, and inferred conversion process of arsenical chemical agent. The results indicate that after simple destroying and long time burial, almost all arsenical chemical agents in soil at this region are converted into inorganic arsenic due to explosion, burning, natural oxidation and microorganism, which primarily exists as As (V). Organic arsenic was only detected at where shells were buried (destroyed), in leaded shells and contaminated soil, with its content 3.65%~32.03%; Organic arsenic content of soil in other part is less than 10%. In contaminated soil of this region, water soluble arsenic and available arsenic extracted from disodium hydrogen phosphate take 0.81~2.58% and 7.49~15.96% of total arsenic respectively. Exchangeable As and binding As (Al-As, Fe-As, reducible As and Ca-As) take 40% of total arsenic, residual As takes 49.38~66.43%. The results may be used as basis for determining remedy methods and assessing ecological safety at this region.

Yellow River Delta had been extensively engineered to control flooding and to protect coastal development which leaded to wetlands destruction and severe water pollution. The Yellow River Conservancy Commission decided the water supplement to the wetland during the water and sediment regulation period in 2010. In order to study the water quantity and distribution simulation, one-dimensional SOBEK model was used to flood simulation in the Yellow River Delta. The Re of the daily water level at four stations for the calibration period were 0.6%, 2.3%, 2.9%, 7.0%,.which indicated that the simulated values matched very well with the observed values. The SOBEK model had predicted the water level volume in 2003 within the range of acceptable accuracy. It indicated that the one-dimensional method SOBEK model was suitable for the flood simulation.

In this study, curled gelatin nanofiber was successfully electrospun from aqueous solution by elevating the spinning temperature. The effect of relative humidity was investigated on the morphology of gelatin nanofibers in the current study. It was observed that with the increase of relative humidity during electrospinning process, the proportion of the curled gelatin nanofiber increases. Futhermore, the curled gelatin nanofiber converted into helical structure when electrospun at relative humidity higher than 50%.

In this paper, a kind of fibrous TiO2 has been prepared through hydrothermal synthesis and a paper fabricated from the fibrous TiO2 has been obtained. The composition, morphology, and size of the fibrous TiO2 were characterized by using X-ray diffraction (XRD) and scanning electron microscope (SEM) respectively. And the morphology of the paper was characterized by polarizing microscope. The thickness, softness, and writing properties of the paper were detected by a vernier caliper and a pen. The results indicate that the diameter of the fibrous TiO2 is ~ 200 nm, the thickness of the fabricated paper is ~ 0.35 mm, and the paper can be tolerated writing by a UM-100 ball pen. The excellent properties of the prepared paper may change the applications of fibrous TiO2 in papermaking industry.

This paper mainly realizes scramble in TD-LTE system. It includes the introduction of scrambling; projects form; the process of FPGA implementation and the results analysis. Then it finishes simulation, synthesis and verification of board on Virtex-6.The implementation of results shows that this algorithm of modulation and scramble has a high effectively and good reliability to TD-LTE RF conformance testing instrument.