Search

As the societal issue of increasing global illicit drug usage emerges, there is a growing demand for more portable and versatile drug detectors. Traditional drug analysis techniques such as gas chromatography (GC), liquid chromatography (LC), and Fourier transform infrared spectroscopy (FTIR) face significant challenges in adapting to diverse real-world applications due to their size, cost, and power requirements. While advancements have been made in the development of on-site drug detection methods such as fluorescence, stereoresonance energy transfer (FRET), colorimetric, electrochemical sensing, and lateral flow assays (LFAs), their reliance on specific reactive materials poses limitations in effectively detecting a wide range of narcotics. Therefore, this study proposes the development of specialized microcolumns with optimized stationary phases for next-generation portable microfabricated GC-based narcotic detectors. The stationary phase consists of a hybrid gel incorporating the ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF 4 ]) and OV-1. The stationary phase not only enhances interactions between drug analytes but also demonstrates improved separation characteristics among various narcotic substances. Additionally, the principles of the separation results were validated through density functional theory (DFT) analysis, and the effective separation of over seven types of narcotics was demonstrated through temperature optimization. This research lays the groundwork for the advancement of next-generation portable drug analyzers, offering significant potential in the field.

In this study, we synthesized levan shell hydrophobic silica nanoclusters encapsulating doxorubicin (L-HSi-Dox) and evaluated their potential as ultrasound-responsive drug delivery systems for cancer treatment. L-HSi-Dox nanoclusters were successfully fabricated by integrating a hydrophobic silica nanoparticle-doxorubicin complex as the core and an amphiphilic levan carbohydrate polymer as the shell by using an electrospray technique. Characterization analyses confirmed the stability, size, and composition of the nanoclusters. In particular, the nanoclusters exhibited a controlled release of Dox under aqueous conditions, demonstrating their potential as efficient drug carriers. The levanic groups of the nanoclusters enhanced the targeted delivery of Dox to specific cancer cells. Furthermore, the synergism between the nanoclusters and ultrasound effectively reduced cell viability and induced cell death, particularly in the GLUT5-overexpressing MDA-MB-231 cells. In a tumor xenograft mouse model, treatment with the nanoclusters and ultrasound significantly reduced the tumor volume and weight without affecting the body weight. Collectively, these results highlight the potential of the L-HSi-Dox nanoclusters and ultrasound as promising drug delivery systems with an enhanced therapeutic efficacy for biomedical applications.

Thermal ionization mass spectrometry is a powerful analytical technique that allows for precise determination of isotopic ratios. Analysis of low abundance samples, however, can be limited by the ionization efficiency. Following an investigation into a new type of metal-organic hybrid material, nanoporous ion emitters (nano-PIEs), devised to promote the emission of analyte ions and reduce traditional sample loading challenges, this work evaluates the impact that changing the metal in the material has on the ionization of uranium (U). Being derived from metal-organic frameworks (MOFs), nano-PIEs inherit the tunability of their parent MOFs. The MOF-74 series has been well studied for probing the impact various framework metals (i.e., Mg, Mn, Co, Ni, Cu, Zn, and Cd) have on material properties, and thus, a series of nano-PIEs with different metals were derived from this isoreticular MOF series. Trends in ionization efficiency were studied as a function of ionization potential, volatility, and work function of the framework metals to gain a better understanding of the mechanism of analyte ionization. This study finds a correlation between the analyte ionization efficiency and nano-PIE framework metal volatility that is attributed to its tunable thermal stability and degradation behavior.

In this study, we incorporated TiN as a carrier suppressor into an amorphous InZnO channel to achieve stable channels for thin-film transistors (TFTs) and light-emitting transistors (LETs). The low electronegativity and standard electrode potential of the Ti dopant led to a reduction in the number of oxygen vacancies in the InZnO channel. Moreover, the substitution of nitrogen into the oxygen sites of InZnO effectively decreased the excess electrons. As a result, the cosputtering of the TiN dopant resulted in a decrease in the carrier concentration of the InZnO channel, serving as an effective carrier suppressor. Due to the distinct structures of TiN and InZnO, the TiN-doped InZnO channel exhibited a completely amorphous structure and a featureless surface morphology. The presence of oxygen vacancies in the InZnO channel creates trap states for electrons and holes. Consequently, the TFT with the InZnTiON channel demonstrated an improved subthreshold swing and enhanced stability during the gate bias stress test. Furthermore, the threshold voltage shift (Δ V th ) changed from 3.29 to 0.86 V in the positive bias stress test and from -0.92 to -0.09 V in the negative bias stress test. Additionally, we employed an InZnTiON channel in LETs as a substitute for organic semiconductors. The reduction in the number of oxygen vacancies effectively prevented exciton quenching caused by hole traps within the vacancies. Consequently, appropriate TiN doping in the InZnO channel enhanced the intensity of the LET devices.

Fused aromatic rings are widely employed in organic solar cell (OSC) materials due to their planarity and rigidity. Here, we designed and synthesized four two-dimensional non-fullerene acceptors, D6-4F, D6-4Cl, DTT-4F, and DTT-4Cl, based on two new fused planar ring structures of f-DTBDT-C6 and f-DTTBDT. Owing to the desirable phase separation formed in the blend films and the higher energy levels induced by the extra alkyl groups, PM6:D6-4F-based devices achieved a high V OC = 0.91 V with PCE = 11.10%, FF = 68.54%, and J SC = 17.75 mA/cm 2 . Because of the longer π-conjugation of the f-DTTBDT core with nine fused rings, DTT-4F and DTT-4Cl showed high molar extinction coefficients and broad absorption bands that enhanced the current density of OSCs. Finally, the PM6:DTT-4F-based devices achieved a J SC = 19.82 mA/cm 2 with PCE = 9.68%, V OC = 0.83 V, and FF = 58.85%.

Antireflective (AR) surface texturing is a feasible way to boost the light absorption of photosensitive materials and devices. As a plasma-free etching method, metal-assisted chemical etching (MacEtch) has been employed for fabricating GaN AR surface texturing. However, the poor etching efficiency of typical MacEtch hinders the demonstration of highly responsive photodetectors on an undoped GaN wafer. In addition, GaN MacEtch requires metal mask patterning by lithography, which leads to a huge processing complexity when the dimension of GaN AR nanostructure scales down to the submicron range. In this work, we have developed a facile texturing method of forming a GaN nanoridge surface on an undoped GaN thin film by a lithography-free submicron mask-patterning process via thermal dewetting of platinum. The nanoridge surface texturing effectively reduces the surface reflection in the ultraviolet (UV) regime, which can be translated to a 6-fold enhancement in responsivity (i.e., 115 A/W) of the photodiode at 365 nm. The results demonstrated in this work show that MacEtch can offer a viable route for enhanced UV light-matter interaction and surface engineering in GaN UV optoelectronic devices.

The network structures of liquid crystal elastomers (LCEs) are crucial to impart rubbery behavior to LCEs and enable reversible actuation. Most LCEs developed to date are covalently linked, implying that the cross-links are fixed at a particular position. Herein, we report a new class of LCEs integrating polyrotaxanes (PRs) as slidable cross-links (PR-LCEs). Interestingly, the incorporation of a low loading (0.3-2.0 wt %) of the PR cross-linkers to the LCE causes a significant impact on various properties of the resulting PR-LCEs due to the pulley effect. The optimum PR loading is determined to be 0.5 wt %, at which point the toughness and damping behavior are maximized. The robust mechanical properties of the PR-LCE offers a superior actuation performance to that of the pristine LCE along with an excellent quadruple shape-memory effect. Furthermore, the incorporation of PR is useful to enhance the efficiency of shape-memory-assisted self-healing when heating above the nematic-isotropic transition.

Elaborately and serially pH-modulated hydrogels possessing optimized viscoelastic natures for short gelation time and single syringe injection were designed for peritumoral injection of an anticancer agent. Boronate ester bonds between phenylboronic acid (PBA) (installed in HA-PBA (HP)) and dopamine (included in HA-dopamine (HD)) along with self-polymerization of dopamine (via interactions between HD conjugates) were introduced as the main cross-linking strategies of a hyaluronic acid (HA) hydrogel. Considering p K a values (8.0-9.5) of PBA and dopamine, the pH of each polymer dispersion was controlled elaborately for injection through a single syringe, and the final pH was tuned nearby the physiological pH (pH 7.8). The shear-thinning behavior, self-healing property, and single syringe injectability of a designed hydrogel cross-linked nearby physiological pH may provide its convenient application to peritumoral injection and prolonged retention in local cancer therapy. Erlotinib (ERT) was encapsulated in a microsphere (MS), and it was further embedded in an HP/HD-based hydrogel for sustained and locoregional delivery. A rheologically tuned hydrogel containing an ERT MS exhibited superior tumor-suppressive efficiencies compared to the other groups in A549 tumor-bearing mice. A designed injectable hydrogel through a single syringe system may be efficiently applied to local cancer therapy with lower toxicities to healthy organs.

The work presented in this report demonstrates that amphiphilic polysaccharide-clasped self-assembly (Amp-SA) with nanometer size, encapsulating hydrophobic nanoparticles (NPs) can be generated via electrohydrodynamic spraying. It is observed that the formation of hydrophobic NP-encapsulated Amp-SA is dependent on the surface chemistry of NPs. The citrate-coated magnetic NPs (MNPs-Cit) were also prepared and compared. The hydrophobic magnetic NP-encapsulated Amp-SA (Amp-SA-M) exhibited around 2.7-2.8-fold higher values in r 2 relaxivity than that of MNPs-Cit. In addition, the resulting Amp-SA-M achieved ∼17.2-fold higher values in r 2 / r 1 ratios than MNPs-Cit. The enhanced performances in magnetic transverse ( r 2 ) relaxivity and r 2 / r 1 ratio as well as the in vivo behavior of Amp-SA-M suggest the potential of Amp-SA-M as a promising MRI nanoprobe. This approach based on the nature-originated amphiphilic biopolymers may provide a novel insight into electrohydrodynamic techniques that have the ability to create various nanostructures, encapsulating high-quality hydrophobic nanomaterials for applications in diverse biotechnology.

A BiVO 4 /Bi 2 S 3 composite comprising Bi 2 S 3 nanowires on top of a BiVO 4 film was prepared via hydrothermal reaction. Because additional Bi 3+ ions were not delivered during the reaction, BiVO 4 served as the Bi 3+ ion source for the development of Bi 2 S 3 . A detailed growth mechanism of the nanowire was elucidated by an analysis of the concentration gradient of Bi 3+ and S 2- ions during the reaction. The in situ growth was followed by the etching of BiVO 4 to Bi 3+ and VO 4 3- ions and regrowth to Bi 2 S 3 , which resulted in the rapid evolution of nanowires on the BiVO 4 substrate. The fabricated BiVO 4 /Bi 2 S 3 NW composite exhibited an improved photoelectrochemical activity compared to other Bi 2 S 3 samples. The improved efficiency was mainly attributed to both improved charge separation and effective adhesion obtained by the in situ growth.

The class of organic-inorganic lead halides with perovskite crystal structures has recently emerged as promising materials for a variety of practical optoelectronic applications. In particular, hybrid halide perovskite quantum dots possess excellent intrinsic optoelectronic properties such as high color purity (full width at half-maximum of 24.59 nm) and photoluminescence quantum yields (92.7%). In this work, we demonstrate the use of perovskite quantum dot materials as an emissive layer of hybrid light-emitting transistors. To investigate the working mechanism of perovskite quantum dots in light-emitting transistors, we investigated the electrical and optical characteristics under both p-channel and n-channel operation. Using these materials, we have achieved perovskite quantum dot light-emitting transistors with high electron mobilities of up to 12.06 cm 2 ·V -1 s -1 , high brightness of up to 1.41 × 10 4 cd m -2 , and enhanced external quantum efficiencies of up to 1.79% operating at a source-drain potential of 40 V.

The surface of human silicone breast implants is covalently grafted at a high density with a 2-methacryloyloxyethyl phosphorylcholine (MPC)-based polymer. Addition of cross-linkers is essential for enhancing the density and mechanical durability of the MPC graft. The MPC graft strongly inhibits not only adsorption but also the conformational deformation of fibrinogen, resulting in the exposure of a buried amino acid sequence, γ377-395, which is recognized by inflammatory cells. Furthermore, the numbers of adhered macrophages and the amounts of released cytokines (MIP-1α, MIP-1β, IL-8, TNFα, IL-1α, IL-1β, and IL-10) are dramatically decreased when the MPC network is introduced at a high density on the silicone surface (cross-linked PMPC-silicone). We insert the MPC-grafted human silicone breast implants into Yorkshire pigs to analyze the in vivo effect of the MPC graft on the capsular formation around the implants. After 6 month implantation, marked reductions of inflammatory cell recruitment, inflammatory-related proteins (TGF-β and myeloperoxidase), a myoblast marker (α-smooth muscle actin), vascularity-related factors (blood vessels and VEGF), and, most importantly, capsular thickness are observed on the cross-linked PMPC-silicone. We propose a mechanism of the MPC grafting effect on fibrous capsular formation around silicone implants on the basis of the in vitro and in vivo results.

A flexible hard coating material displaying extreme scratch resistance and foldable flexibility was developed via the design of an organic-inorganic hybrid coating material employing an alkoxysilyl-functionalized polyrotaxane cross-linker (PRX_Si1). PRX_Si1 has a molecular necklace-like structure that can form organic-inorganic cross-linking points and provide large molecular movements. It was postulated that the scratch resistance and flexibility could be simultaneously increased because of the hybrid cross-linking points and dynamic molecular movements. To confirm this hypothesis, the crystalline structure and mechanical properties of the PRX_Si1-based hard coating material were analyzed via transmission electron microscopy, small-angle X-ray diffraction, tensile, pencil hardness, and scratch tests. Finally, the PRX_Si1-based hard coating material could form homogeneously dispersed nanoscale siloxane crystalline domains, and the strain at the break point was 3 times higher than that of a commercial hard coating material, resulting in no defect formation even after 5000 folding test runs. Moreover, the material displayed extremely high pencil hardness (9H) and scratch resistance.

Quorum sensing (QS) inhibitor-based therapy is an attractive strategy to inhibit bacterial biofilm formation without excessive induction of antibiotic resistance. Thus, we designed Ca 2+ -binding poly(lactide- co-glycolide) (PLGA) microparticles that can maintain a sufficient concentration of QS inhibitors around hydroxyapatite (HA) surfaces in order to prevent biofilm formation on HA-based dental or bone tissues or implants and, therefore, subsequent pathogenesis. Poly(butyl methacrylate- co-methacryloyloxyethyl phosphate) (PBMP) contains both Ca 2+ -binding phosphomonoester groups and PLGA-interacting butyl groups. The PBMP-coated PLGA (PLGA/PBMP) microparticles exhibited superior adhesion to HA surfaces without altering the sustained release properties of uncoated PLGA microparticles. PLGA/PBMP microparticle-encapsulating furanone C-30, a representative QS inhibitor, effectively inhibited the growth of Streptococcus mutans and its ability to form biofilms on HA surface for prolonged periods of up to 100 h, which was much longer than either furanone C-30 in its free form or when encapsulated in noncoated PLGA microparticles.

The introduction of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a standard hole transport layer greatly increased the efficiency of early organic solar cells. However, because PEDOT:PSS has a metallic property, it can still form a barrier by means of metal-semiconductor contact at its interface with the photoactive layer. In this study, we modified the PEDOT:PSS surface with hydroquinone (HQ) to remove that barrier. HQ treatment of the PEDOT:PSS surface lowered the hole transport barrier at the interface between the PEDOT:PSS and the active layer. In addition, because of the secondary doping effect of HQ, the sheet resistance of the PEDOT:PSS surface decreased by almost 2 orders of magnitude. As a result, the device fabricated with the HQ-modified PEDOT:PSS showed a 28% increase in efficiency compared to the device without HQ treatment. Modifying the PEDOT:PSS surface with HQ solution is an easy way to effectively boost the performance of polymer solar cells.

Relaxivity tuning of nanomaterials with the intrinsic T 1 - T 2 dual-contrast ability has great potential for MRI applications. Until now, the relaxivity tuning of T 1 and T 2 dual-modal MRI nanoprobes has been accomplished through the dopant, size, and morphology of the nanoprobes, leaving room for bioapplications. However, a surface engineering method for the relaxivity tuning was seldom reported. Here, we report the novel relaxivity tuning method based on the surface engineering of dual-mode T 1 - T 2 MRI nanoprobes (DMNPs), along with protein interaction monitoring with the DMNPs as a potential biosensor application. Core nanoparticles (NPs) of europium-doped iron oxide (EuIO) are prepared by a thermal decomposition method. As surface materials, citrate (Cit), alendronate (Ale), and poly(maleic anhydride- alt-1-octadecene)/poly(ethylene glycol) (PP) are employed for the relaxivity tuning of the NPs based on surface engineering, resulting in EuIO-Cit, EuIO-Ale, and EuIO-PP, respectively. The key achievement of the current study is that the surface materials of the DMNP have significant impacts on the r 1 and r 2 relaxivities. The correlation between the hydrophobicity of the surface material and longitudinal relaxivity ( r 1 ) of EuIO NPs presents an exponential decay feature. The r 1 relaxivity of EuIO-Cit is 13.2-fold higher than that of EuIO-PP. EuIO can act as T 1 - T 2 dual-modal (EuIO-Cit) or T 2 -dominated MRI contrast agents (EuIO-PP) depending on the surface engineering. The feasibility of using the resulting nanosystem as a sensor for environmental changes, such as albumin interaction, was also explored. The albumin interaction on the DMNP shows both T 1 and T 2 relaxation time changes as mutually confirmative information. The relaxivity tuning approach based on the surface engineering may provide an insightful strategy for bioapplications of DMNPs and give a fresh impetus for the development of novel stimuli-responsive MRI nanoplatforms with T 1 and T 2 dual-modality for various biomedical applications.

Sodiation was performed on crystalline Sn cylinders using an in situ electron microscope to evaluate the rate performance of the Sn anode by directly measuring the sodiation rate. We observed that the sodiation rate of the Sn anode is more than 2 orders of magnitude higher than the lithiation rate of the Si anode under the same conditions. This unprecedented rate displayed by the Na-Sn system is attributed to the bond characteristics and crystalline-to-amorphous transformation of the Sn crystal at the thin interface of the Na-Sn diffusion couple. Here, using atomic simulations, we explain how and why the Sn anode exhibits this high rate performance by resolving the diffusion process of Na ions in the Na-Sn interfacial region and the electron structure of the crystalline Sn. This work provides a useful insight into the use of Sn as an attractive anode material for realizing ultrafast-charging batteries for electric vehicles and mobile devices.

We designed and fabricated a random-size inverted-pyramid-structured polydimethylsiloxane (RSIPS-PDMS) sticker to enhance the light absorption of solar cells and thus increase their efficiency. The fabricated sticker was laminated onto bare glass and crystalline silicon (c-Si) surfaces; consequently, low solar-weighted reflectance values were obtained for these surfaces (6.88 and 17.2%, respectively). In addition, we found that incident light was refracted at the PDMS-air interface of each RSIPS, which redirected the incident power and significantly increased the optical path length in the RSIPS-PDMS sticker which was 14.7% greater than that in a flat-PDMS sticker. Moreover, we investigated power reflection and propagation through the RSIPS-PDMS sticker using a finite-difference time-domain method. By attaching an RSIPS-PDMS sticker onto both an organic solar cell (OSC) based on a glass substrate and a c-Si solar cell, the power conversion efficiency of the OSC and the c-Si solar cell were increased from 8.57 to 8.94% and from 16.2 to 17.9%, respectively. Thus, the RSIPS-PDMS sticker is expected to be universally applicable to the surfaces of solar cells to enhance their light absorption.

The goal of this study is to fabricate a stable plasma filtration membrane with antibiofouling properties via an electrospinning process. To this end, a random-type copolymer consisting of zwitterionic phosphorylcholine (PC) groups and ultraviolet (UV)-cross-linkable phenyl azide groups was synthesized. The zwitterionic PC group provides antibiofouling properties, and the phenyl azide group enables the stable maintenance of the fibrous nanostructure of hydrophilic zwitterion polymers in aqueous medium via a simple UV curing process. To demonstrate the antibiofouling nature of the PC group, a polymer without antibiofouling PC groups was also prepared for comparison. The successful synthesis of the random-type copolymers containing phenyl azide groups was proven by 1 H nuclear magnetic resonance and Fourier transform infrared spectroscopy, and the fibrous structure of the prepared membranes was observed by field emission scanning electron microscopy. The antibiofouling properties were analyzed by fluorescein isothiocyanate-labeled bovine serum albumin adsorption and platelet adhesion tests. The experimental results show that membranes containing zwitterionic PC groups exhibited obvious decreases in platelet adhesion and protein adsorption. Platelet-rich plasma solution was filtered using the prepared membranes to test their filtration properties. The sequential filtration process removed 80% and almost 98% of the platelets. This finding confirmed that the membrane retained its blood-inert biomaterial surface in a complex medium that included blood plasma and platelets.

Expanded polytetrafluoroethylene (ePTFE), also known as Gore-Tex, is widely used as an implantable biomaterial in biomedical applications because of its favorable mechanical properties and biochemical inertness. However, infection and inflammation are two major complications with ePTFE implantations, because pathogenic bacteria can inhabit the microsized pores, without clearance by host immune cells, and the limited biocompatibility can induce foreign body reactions. To minimize these complications, we covalently grafted a biomembrane-mimic polymer, poly(2-methacryloyloxylethyl phosphorylcholine) (PMPC), by partial defluorination followed by UV-induced polymerization with cross-linkers on the ePTFE surface. PMPC grafting greatly reduced serum protein adsorption as well as fibroblast adhesion on the ePTFE surface. Moreover, the PMPC-grafted ePTFE surface exhibited a dramatic inhibition of the adhesion and growth of Staphylococcus aureus, a typical pathogenic bacterium in ePTFE implants, in the porous network. On the basis of an analysis of immune cells and inflammation-related factors, i.e., transforming growth factor-β (TGF-β) and myeloperoxidase (MPO), we confirmed that inflammation was efficiently alleviated in tissues around PMPC-grafted ePTFE plates implanted in the backs of rats. Covalent PMPC may be an effective strategy for promoting anti-inflammatory and antibacterial functions in ePTFE implants and to reduce side effects in biomedical applications of ePTFE.

In this study, diffusion-induced hydrophobic-hydrophilic conversion of the surface of the cross-linked polydimethylsiloxane (PDMS) substrate was realized by employing a simple swelling-deswelling process of PDMS substrate in a block-type polymer solution with the aim of development of a temporal cell-adhesive substrate. The ABA block-type polymer composed of poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) segment and PDMS segment with over 70% of dimethylsiloxane unit composition could be successfully incorporated in the PDMS substrate during the swelling-deswelling process to prepare the PDMS/phospholipid block copolymer hybrid substrates. During the aging process of the PDMS substrate for 4 days in aqueous medium, its surface property changed gradually from hydrophobic to hydrophilic. X-ray photoelectron spectroscopy and atomic force microscopy data provided strong evidence that the time-dependent hydrophilic conversion of the PDMS/block-type phospholipid polymer hybrid substrate was induced by the diffusion of the hydrophilic PMPC segment in the block-type polymer to be tethered on the substrate. During the hydrophilic conversion process, surface-adsorbed fibronectin was gradually desorbed from the substrate surface, and this resulted in successful detachment of two-dimensional connected cell crowds.

Polyrotaxanes, such as supramolecular assemblies with methylated α-cyclodextrins (α-CDs) as host molecules noncovalently threaded on the linear polymer backbone, are promising materials for biomedical applications because they allow adsorbed proteins possessing a high surface flexibility as well as control of the cellular morphology and adhesion. To provide a general design principle for biomedical materials, we examined the surface reorganization behaviors and adsorption conformations of fibrinogen on the polyrotaxane surfaces with comparison to several random copolymers by sum frequency generation (SFG) vibrational spectroscopy. We showed that the polyrotaxane (OMe-PRX-PMB) with methylated α-CDs as the host molecule exhibited unique surface structures in an aqueous environment. The hydrophobic interaction between the methoxy groups of the methylated α-CD molecules and methyl groups of the n-butyl methacrylate (BMA) side chains may dominate the surface restructuring behavior of the OMe-PRX-PMB. The orientation analysis revealed that the orientation of the fibrinogen adsorbed on the OMe-PRX-PMB surface is close to a single distribution, which is different from the adsorption behaviors of fibrinogen on other polyrotaxane or random copolymer surfaces.

Through a combined density functional theory and in situ scanning electron microscopy study, the effects of presence of gold (Au) spreading on the lithiation process of silicon nanowire (SiNW) were systematically examined. Different from a pristine SiNW, an Au-coated SiNW (Au-SiNW) is lithiated in three distinct stages; Li atoms are found to be incorporated preferentially in the Au shell, whereas the thin AuSi interface layer may serve as a facile diffusion path along the nanowire axial direction, followed by the prompt lithiation of the Si core in the radial direction. The underlying mechanism of the intriguing stagewise lithiation behavior is explained through our theoretical analysis, which appears well-aligned with the experimental evidence.

During implant surgeries, antibacterial agents are needed to prevent bacterial infections, which can cause the formation of biofilms between implanted materials and tissue. Mussel adhesive proteins (MAPs) derived from marine mussels are bioadhesives that show strong adhesion and coating ability on various surfaces even in wet environment. Here, we proposed a novel surface-independent antibacterial coating strategy based on the fusion of MAP to a silver-binding peptide, which can synthesize silver nanoparticles having broad antibacterial activity. This sticky recombinant fusion protein enabled the efficient coating on target surface and the easy generation of silver nanoparticles on the coated-surface under mild condition. The biosynthesized silver nanoparticles showed excellent antibacterial efficacy against both Gram-positive and Gram-negative bacteria and also revealed good cytocompatibility with mammalian cells. In this coating strategy, MAP-silver binding peptide fusion proteins provide hybrid environment incorporating inorganic silver nanoparticle and simultaneously mediate the interaction of silver nanoparticle with surroundings. Moreover, the silver nanoparticles were fully synthesized on various surfaces including metal, plastic, and glass by a simple, surface-independent coating manner, and they were also successfully synthesized on a nanofiber surface fabricated by electrospinning of the fusion protein. Thus, this facile surface-independent silver nanoparticle-generating antibacterial coating has great potential to be used for the prevention of bacterial infection in diverse biomedical fields.

We investigated the effects of postnitridation on the structural characteristics and interfacial reactions of HfO2 thin films grown on InP by atomic layer deposition (ALD) as a function of film thickness. By postdeposition annealing under NH3 vapor (PDN) at 600 °C, an InN layer formed at the HfO2/InP interface, and ionized NHx was incorporated in the HfO2 film. We demonstrate that structural changes resulting from nitridation of HfO2/InP depend on the film thickness (i.e., a single-crystal interfacial layer of h-InN formed at thin (2 nm) HfO2/InP interfaces, whereas an amorphous InN layer formed at thick (>6 nm) HfO2/InP interfaces). Consequently, the tetragonal structure of HfO2 transformed into a mixture structure of tetragonal and monoclinic because the interfacial InN layer relieved interfacial strain between HfO2 and InP. During postdeposition annealing (PDA) in HfO2/InP at 600 °C, large numbers of oxidation states were generated as a result of interfacial reactions between interdiffused oxygen impurities and out-diffused InP substrate elements. However, in the case of the PDN of HfO2/InP structures at 600 °C, nitrogen incorporation in the HfO2 film effectively blocked the out-diffusion of atomic In and P, thus suppressing the formation of oxidation states. Accordingly, the number of interfacial defect states (Dit) within the band gap of InP was significantly reduced, which was also supported by DFT calculations. Interfacial InN in HfO2/InP increased the electron-barrier height to ∼0.6 eV, which led to low-leakage-current density in the gate voltage region over 2 V.

Doping semiconductor nanowires (NWs) for altering their electrical and optical properties is a critical strategy for tailoring the performance of nanodevices. ZnO NWs grown by hydrothermal method are pervasively used in optoelectronic, photovoltaic, and piezoelectric energy-harvesting devices. We synthesized in situ Cl-doped ZnO NWs with metallic conductivity that would fit seamlessly with these devices and improve their performance. Possible Cl doping mechanisms were discussed. UV-visible absorption spectroscopy confirmed the visible light transparency of Cl-doped ZnO NWs. Cl-doped ZnO NW/TiO2 core/shell-structured photoelectrochemical (PEC) anode was fabricated to demonstrate the application potential of highly conductive ZnO NWs. Higher photocurrent density and overall PEC efficiency compared with the undoped ZnO NW-based device were achieved. The successful doping and low resistivity of ZnO could unlock the potential of ZnO NWs for applications in low-cost flexible transparent electrodes.