Search

Abstract: The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations. The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results. [Copyright &y& Elsevier]

This paper is aimed at developing a systematic methodology for the cost-effective reduction of water usage and discharge in pulp and paper plants. As the industry moves towards increased system closure, the build-up of Non-Process Elements (NPEs) leads to serious consequences on the process equipment. In response, this paper achieves the following: • a mathematical model to track water and primary NPEs throughout the pulping process • rigorous targeting for water usage and discharge • a systematic framework for water reduction using mass integration strategies including no/low cost techniques as well as capital-based techniques • an optimisation model for the optimisation of allocation, recycle and separation of aqueous streams. A case study for water management in a kraft pulping process has been solved to highlight the usefulness of the devsied approach. [ABSTRACT FROM AUTHOR]

The article presents a conceptual framework using simulation to predict effluent biochemical oxygen demand (BOD) characteristics as a function of improved wastewater treatment. These simulations use equations that describe BOD kinetics. They also able to reproduce trends in f-ratio observed at various pulp and paper facilities and predict BOD reactivity as a function of treatment.

Within our research work we determined the Young's modulus distribution in the paper plane on the basis of results of tensile tests in selected directions. Using mathematical relationships valid for orthotropic materials, the moduli were calculated theoretically. The tensile stiffness orientation angle (TSA), and the TSO and TSI indices were also determined in order to define the deviations of the main axes of orthotrophy in the paper plane as determined by the machine and the cross directions. The calculation results were compared with measured values. They justified the conclusion that paper may be treated as an orthotropic material. [ABSTRACT FROM AUTHOR]

Previous studies have demonstrated that students who are engaged in learning tasks and make errors before receiving instruction on how to complete them, achieve better learning outcomes than students who first receive instruction and then complete the learning activities with the aim of avoiding errors. Although simulation literature often refers to errors as learning opportunities, to date, there is limited understanding of how pedagogical approaches that promote learning from errors can guide the design of simulation-based learning in healthcare education. To (a) present the Learning from Errors conceptual model; and (b) provide an example of how educators can use this model. The Learning from Errors model is drawn from critical elements of two pedagogical approaches, productive failure and error management training and pedagogical features of high-quality healthcare simulations. We describe the Learning from Errors model, which emphasises the need for adopting pedagogical methods that explicitly use errors as learning opportunities and ultimately inform simulation design. We then illustrate the application of this model to a simulation example. The model includes the following elements: i) normalisation of errors, ii) challenging simulation scenarios, iii) self-directed learning, iv) collaborative teamwork and v) comparison with best practice. This discussion paper presents the Learning from Errors conceptual model, an evidence-based approach that can assist educators in the design of simulations that embrace errors as a catalyst for learning. [ABSTRACT FROM AUTHOR]

We give a direct proof of the main result of the paper 'Homomorphisms with respect to a function' by K. Boulabiar and F. Gdara [1] without using the Axiom of Choice. [ABSTRACT FROM AUTHOR]

Abstract: The non-citation rate refers to the proportion of papers that do not attract any citation over a period of time following their publication. After reviewing all the related papers in Web of Science, Google Scholar and Scopus database, we find the current literature on citation distribution gives more focus on the distribution of the percentages and citations of papers receiving at least one citation, while there are fewer studies on the time-dependent patterns of the percentage of never-cited papers, on what distribution model can fit their time-dependent patterns, as well as on the factors influencing the non-citation rate. Here, we perform an empirical pilot analysis to the time-dependent distribution of the percentages of never-cited papers in a series of different, consecutive citation time windows following their publication in our selected six sample journals, and study the influence of paper length on the chance of papers’ getting cited. Through the above analysis, the following general conclusions are drawn: (1) a three-parameter negative exponential model can well fit time-dependent distribution curve of the percentages of never-cited papers; (2) in the initial citation time window, the percentage of never-cited papers in each journal is very high. However, as the citation time window becomes wider and wider, the percentage of never-cited papers begins to drop rapidly at first, and then drop more slowly, and the total degree of decline for most of journals is very large; (3) when applying the wider citation time windows, the percentage of never-cited papers for each journal begins to approach a stable value, and after that value, there will be very few changes in these stable percentages, unless we meet a large amount of “Sleeping Beauties” type papers; (4) the length of an paper has a great influence on whether it will be cited or not. [Copyright &y& Elsevier]

A method was developed to estimate the composition of deinked pulp or recovered paper in terms of hardwood kraft pulp, softwood kraft pulp, and mechanical pulp through analysis of the sugar units in hemicelluloses and pectins. Different pulps (i.e., bleached chemical pulp from hardwoods and softwoods and mechanical pulp) were obtained from different mills. The pulps were mixed in different proportions and dried. The content of arabinose, xylose, mannose, galactose, rhamnose, galacturonic acid, and 4-O-methyl-glucuronic acid, sugar units in hemicelluloses and pectins in the different pulps and in the mixtures were determined by acid methanolysis and gas chromatography. The contents of the sugar units were significantly different in the three pulp types but quite similar in the same pulp type, irrespectively of bleaching sequence. The modeling was performed using standard partial least squares regression (PLSR) and cross-validation using venetian blinds subsets. The data were autoscaled before regressions. The best model had two latent variables. The cumulative variation of X captured by the model was 0.988 (R²X), the cumulative variation of Y captured by the model was also 0.988 (R²Y), and the cumulative cross-validated variation of Y captured by the model was 0.974 (Q²). Accordingly, the PLS model is more than capable of predicting the validation set. It was concluded that the proportion of chemical pulp from hardwoods, chemical pulp from softwoods, and mechanical pulp can be estimated in recovered paper or deinked pulp using a mathematical model based on the content of selected sugar units in hemicelluloses and pectins. [ABSTRACT FROM AUTHOR]

The article discusses the study which develops a dynamic modular paper machine simulator package. It has been noted that computer simulation can be a valuable tool for the optimization of paper production processes, designing wastewater closure strategies and the visualization of a complicated process. It shows that by structuring the simulator as a set of modular blocks, a variety of configurations can be modeled by assembling the blocks in different ways. In addition, researchers have recommended that the simulator package can help in developing simple models for the simulation of complex dynamic systems.

This work is concerned with the determination of the adhesion strength between a paper web and an adhesive surface. Edvards- son et al. [Edvardsson, S., Gradin, P., and Isaksson, P., "On Dissipative Effects of Paper Web Adhesion Strength," Int. J. Solids Struct., Vol. 48(1), 2011, pp. 24-30] suggested recently a model that takes into account the energy dissipation caused by elastic-plastic deformation in the bent structure of a paper specimen. This model is fial'ther developed and investigated in the present work. A linear relation in plastic dissipation is discovered facilitating a novel analysis of the peeling tension and a more convenient determination of the proper adhesion strength. Industrial relevant examples are made with wet newsprint and kraft stock. A straightforward experimental procedure for determining the consistent adhesion strength is suggested. It is found that the agreement between the model and the experimental observations is good. [ABSTRACT FROM AUTHOR]

Copyright of Revista de Saúde Pública is the property of Faculdade de Educacao da Universidade de Sao Paulo and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract: A lot of work has been done in the field of multi-valued model checking home and abroad. But some research works are not perfect. Some problems in the semantic definitions of temporal operators and corresponding model checking algorithms are found in the paper “Model Checking Using Partial Kripke Structure with 3-Valued Temporal Logic”. Some counterexamples are given to show these errors. On the basis of the discussion, some sound semantic definitions of temporal operators and correct algorithms of model checking for some temporal operators are given. [Copyright &y& Elsevier]

Copyright of Revue Française de Sociologie is the property of Presses de Sciences Po and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract: Although the scale invariance is a main feature of growing networks, evidence from a few modelled networks show that the finite-size effect of network at a fixed time cannot be ignored. We propose a concept of time-dependent scale-free networks, and prove the criteria for the stability and scale-free of growing networks by the degree-growing Markov chain. Our results show the importance of rigorous theoretical analysis for the network science. [ABSTRACT FROM AUTHOR]

For the stability of composite fibre spinning, the difference in and distribution of the polymer melt velocity during the spinning are among the factors of importance. Based on the basic equation for the control of composite spinning dynamics, boundary conditions are identified and reported in this paper. A mathematical model for the symmetric and asymmetric distribution of the melt flow velocity in the microhole of the spinneret of the composite spinning assembly was developed. The accuracy of the mathematical model was also ascertained. It gives a theoretical basis for the designing of a composite spinning assembly. [ABSTRACT FROM AUTHOR]