Search

In this research, Hydroxyapatite—Potassium, Sodium Niobate—Chitosan (HA-KNN-CSL) biocomposites were synthesized, both as hydrogel and ultra-porous scaffolds, to offer two commonly used alternatives to biomaterials in dental clinical practice. The biocomposites were obtained by varying the content of low deacetylated chitosan as matrix phase, mesoporous hydroxyapatite nano-powder, and potassium–sodium niobate (K0.47Na0.53NbO3) sub-micron-sized powder. The resulting materials were characterized from physical, morpho-structural, and in vitro biological points of view. The porous scaffolds were obtained by freeze-drying the composite hydrogels and had a specific surface area of 18.4—24 m2/g and a strong ability to retain fluid. Chitosan degradation was studied for 7 and 28 days of immersion in simulated body fluid without enzymatic presence. All synthesized compositions proved to be biocompatible in contact with osteoblast-like MG-63 cells and showed antibacterial effects. The best antibacterial effect was shown by the 10HA-90KNN-CSL hydrogel composition against Staphylococcus aureus and the fungal strain Candida albicans, while a weaker effect was observed for the dry scaffold.

The fabrication of collagen-based biomaterials for skin regeneration offers various challenges for tissue engineers. The purpose of this study was to obtain a novel series of composite biomaterials based on collagen and several types of clays. In order to investigate the influence of clay type on drug release behavior, the obtained collagen-based composite materials were further loaded with gentamicin. Physiochemical and biological analyses were performed to analyze the obtained nanocomposite materials after nanoclay embedding. Infrared spectra confirmed the inclusion of clay in the collagen polymeric matrix without any denaturation of triple helical conformation. All the composite samples revealed a slight change in the 2-theta values pointing toward a homogenous distribution of clay layers inside the collagen matrix with the obtaining of mainly intercalated collagen-clay structures, according X-ray diffraction analyses. The porosity of collagen/clay composite biomaterials varied depending on clay nanoparticles sort. Thermo-mechanical analyses indicated enhanced thermal and mechanical features for collagen composites as compared with neat type II collagen matrix. Biodegradation findings were supported by swelling studies, which indicated a more crosslinked structure due additional H bonding brought on by nanoclays. The biology tests demonstrated the influence of clay type on cellular viability but also on the antimicrobial behavior of composite scaffolds. All nanocomposite samples presented a delayed gentamicin release when compared with the collagen-gentamicin sample. The obtained results highlighted the importance of clay type selection as this affects the performances of the collagen-based composites as promising biomaterials for future applications in the biomedical field.

Iron oxide nanoparticles (IONPs) have been extensively used in different biomedical applications due to their biocompatibility and magnetic properties. However, different functionalization approaches have been developed to improve their time-life in the systemic circulation. Here, we have synthesized IONPs using a modified Massart method and functionalized them in situ with polyethylene glycol with different molecular weights (20 K and 35 K). The resulting nanoparticles were characterized in terms of morphology, structure, and composition using transmission electron microscopy (TEM) and selected area electron diffraction (SAED). In vivo biodistribution was evaluated in Balb/c mice, the presence of IONP being evidenced through histopathological investigations. IONP morphological characterization showed a change in shape (from spherical to rhombic) and size with molecular weight, while structural characterization proved the obtaining of highly crystalline samples of spinel structured cubic face-centered magnetite. In vivo biodistribution in a mice model proved the biocompatibility of all of the IONP samples. All NPs were cleared through the liver, spleen, and lungs, while bare IONPs were also evidenced in kidneys.

The purpose of this study was to construct and characterize iron oxide nanoparticles (IONPCO) for intracellular delivery of the anthracycline doxorubicin (DOX; IONPDOX) in order to induce tumor cell inactivation. More than 80% of the loaded drug was released from IONPDOX within 24 h (100% at 70 h). Efficient internalization of IONPDOX and IONPCO in HeLa cells occurred through pino- and endocytosis, with both IONP accumulating in a perinuclear pattern. IONPCO were biocompatible with maximum 27.9% ± 6.1% reduction in proliferation 96 h after treatment with up to 200 µg/mL IONPCO. Treatment with IONPDOX resulted in a concentration- and time-dependent decrease in cell proliferation (IC50 = 27.5 ± 12.0 μg/mL after 96 h) and a reduced clonogenic survival (surviving fraction, SF = 0.56 ± 0.14; versus IONPCO (SF = 1.07 ± 0.38)). Both IONP constructs were efficiently internalized and retained in the cells, and IONPDOX efficiently delivered DOX resulting in increased cell death vs IONPCO.

Involvement of 3D tumor cell models in the in vitro biological testing of novel nanotechnology-based strategies for cancer management can provide in-depth information on the real behavior of tumor cells in complex biomimetic architectures. Here, we used polyethylene glycol-encapsulated iron oxide nanoparticles for the controlled delivery of a doxorubicin chemotherapeutic substance (IONPDOX), and to enhance cytotoxicity of photon radiation therapy. The biological effects of nanoparticles and 150 kV X-rays were evaluated on both 2D and 3D cell models of normal human keratinocytes (HaCaT) and tumor cells—human cervical adenocarcinoma (HeLa) and human squamous carcinoma (FaDu)—through cell survival. In all 2D cell models, nanoparticles were similarly internalized in a peri-nuclear pattern, but resulted in different survival capabilities following radiation treatment. IONP on normal keratinocytes showed a protective effect, but a cytotoxic effect for cancer cells. In 3D tumor cell models, IONPDOX were able to penetrate the cell spheroids towards the hypoxic areas. However, IONPDOX and 150 kV X-rays led to a dose-modifying factor DMFSF=0.1 = 1.09 ± 0.1 (200 µg/mL IONPDOX) in HeLa spheroids, but to a radioprotective effect in FaDu spheroids. Results show that the proposed treatment is promising in the management of cervical adenocarcinoma.

Two novel fluorescent mesoporous silica-based hybrid materials were obtained through the covalent grafting of [4-hydrazinyl-7-nitrobenz-[2,1,3-d]-oxadiazole (NBDH) and N1-(7-nitrobenzo[c][1,2,5]-oxadiazol-4-yl) benzene-1,2-diamine (NBD-PD), respectively, inside the channels of mesoporous silica SBA-15. The presence of fluorescent organic compounds (nitrobenzofurazan derivatives) was confirmed by infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), thermal analysis (TG), and fluorescence spectroscopy. The nitrogen physisorption analysis showed that the nitrobenzofurazan derivatives were distributed uniformly on the internal surface of SBA-15, the immobilization process having a negligible effect on the structure of the support. Their antioxidant activity was studied by measuring the ability to reduce free radicals DPPH (free radical scavenging activity), in order to formulate potential applications of the materials obtained. Cytotoxicity of the newly synthesized materials, SBA-NBDH and SBA-NBD-PD, was evaluated on human B16 melanoma cells. The morphology of these cells, internalization and localization of the investigated materials in melanoma and fibroblast cells were examined through fluorescence imaging. The viability of B16 (3D) spheroids after treatment with SBA-NBDH and SBA-NBD-PD was evaluated using MTS assay. The results showed that both materials induced a selective antiproliferative effect, reducing to various degrees the viability of melanoma cells. The observed effect was enhanced with increasing concentration. SBA-NBD-PD exhibited a higher antitumor effect compared to SBA-NBDH starting with a concentration of 125 µg/mL. In both cases, a significantly more pronounced antiproliferative effect on tumor cells compared to normal cells was observed. The viability of B16 spheroids dropped by 40% after treatment with SBA-NBDH and SBA-NBD-PD at 500 µg/mL concentration, indicating a clear cytotoxic effect of the tested compounds. These results suggest that both newly synthesized biomaterials could be promising antitumor agents for applications in cancer therapy.

The novel controlled and localized delivery of drug molecules to target tissues using an external electric stimulus makes electro-responsive drug delivery systems both feasible and desirable, as well as entailing a reduction in the side effects. Novel micro-scaffold matrices were designed based on poly(lactic acid) (PLA) and graphene oxide (GO) via electrospinning. Quercetin (Q), a natural flavonoid, was loaded into the fiber matrices in order to investigate the potential as a model drug for wound dressing applications. The physico-chemical properties, electrical triggering capacity, antimicrobial assay and biocompatibility were also investigated. The newly fabricated PLA/GO/Q scaffolds showed uniform and smooth surface morphologies, without any beads, and with diameters ranging from 1107 nm (10%PLA/0.1GO/Q) to 1243 nm (10%PLA). The in vitro release tests of Q from the scaffolds showed that Q can be released much faster (up to 8640 times) when an appropriate electric field is applied compared to traditional drug-release approaches. For instance, 10 s of electric stimulation is enough to ensure the full delivery of the loaded Q from the 10%PLA/1%GO/Q microfiber scaffold at both 10 Hz and at 50 Hz. The antimicrobial tests showed the inhibition of bacterial film growth. Certainly, these materials could be loaded with more potent agents for anti-cancer, anti-infection, and anti-osteoporotic therapies. The L929 fibroblast cells cultured on these scaffolds were distributed homogeneously on the scaffolds, and the highest viability value of 82.3% was obtained for the 10%PLA/0.5%GO/Q microfiber scaffold. Moreover, the addition of Q in the PLA/GO matrix stimulated the production of IL-6 at 24 h, which could be linked to an acute inflammatory response in the exposed fibroblast cells, as a potential effect of wound healing. As a general conclusion, these results demonstrate the possibility of developing graphene oxide-based supports for the electrically triggered delivery of biological active agents, with the delivery rate being externally controlled in order to ensure personalized release.

In this study, we determined the potential of polyethylene glycol-encapsulated iron oxide nanoparticles (IONPCO) for the intracellular delivery of the chemotherapeutic doxorubicin (IONPDOX) to enhance the cytotoxic effects of ionizing radiation. The biological effects of IONP and X-ray irradiation (50 kV and 6 MV) were determined in HeLa cells using the colony formation assay (CFA) and detection of γH2AX foci. Data are presented as mean ± SEM. IONP were efficiently internalized by HeLa cells. IONPCO radiomodulating effect was dependent on nanoparticle concentration and photon energy. IONPCO did not radiosensitize HeLa cells with 6 MV X-rays, yet moderately enhanced cellular radiosensitivity to 50 kV X-rays (DMFSF0.1 = 1.13 ± 0.05 (p = 0.01)). IONPDOX did enhance the cytotoxicity of 6 MV X-rays (DMFSF0.1 = 1.3 ± 0.1, p = 0.0005). IONP treatment significantly increased γH2AX foci induction without irradiation. Treatment of HeLa cells with IONPCO resulted in a radiosensitizing effect for low-energy X-rays, while exposure to IONPDOX induced radiosensitization compared to IONPCO in cells irradiated with 6 MV X-rays. The effect did not correlate with the induction of γH2AX foci. Given these results, IONP are promising candidates for the controlled delivery of DOX to enhance the cytotoxic effects of ionizing radiation.

The present study reports on the development and evaluation of nanostructured composite coatings of polylactic acid (PLA) embedded with iron oxide nanoparticles (Fe3O4) modified with Eucalyptus (Eucalyptus globulus) essential oil. The co-precipitation method was employed to synthesize the magnetite particles conjugated with Eucalyptus natural antibiotic (Fe3O4@EG), while their composition and microstructure were investigated using grazing incidence X-ray diffraction (GIXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The matrix-assisted pulsed laser evaporation (MAPLE) technique was further employed to obtain PLA/Fe3O4@EG thin films. Optimal experimental conditions for laser processing were established by complementary infrared microscopy (IRM) and scanning electron microscopy (SEM) investigations. The in vitro biocompatibility with eukaryote cells was proven using mesenchymal stem cells, while the anti-biofilm efficiency of composite PLA/Fe3O4@EG coatings was assessed against Gram-negative and Gram-positive pathogens.

In this paper, novel drug delivery systems (DDS) were designed based on graphene oxide (GO) as nanocarrier, loaded with two natural substances (quercetin (Qu) and juglone (Ju)) at different concentrations. The chemical structure and morphology of the synthesized GO-based materials were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Raman spectroscopy. The antibacterial activity was evaluated against standard strains, Staphylococcus aureus ATCC 6538, Escherichia coli ATCC 8739, and Candida albicans ATCC 10231. Results demonstrated excellent antimicrobial activity, with a 5 log reduction of E. coli and a 1 log to 3.04 log reduction of S. aureus populations. Reduction rates were above 90%. Biocompatibility tests were also performed on GO-based materials, and the results showed biocompatible behavior for both L929 fibroblast cell line and BT474 breast cancer cells at lower concentrations. The identity of Qu and Ju was demonstrated by matrix-assisted laser desorption/ionization (MALDI) analysis, showing the compounds’ mass with high accuracy. In addition, specific properties of GO made it a versatile matrix for the MALDI analysis. The results of this study indicated that GO-based platforms may be suitable for applications in many areas for the effective and beneficial use of hydrophobic compounds such as Ju and Qu.

The fabrication of 3D microstructures is under continuous development for engineering bone substitutes. Collagen/chitosan (Col/CT) blends emerge as biomaterials that meet the mechanical and biological requirements associated with bone tissue. In this work, we optimize the osteogenic effect of 3D microstructures by their functionalization with Col/CT blends with different blending ratios. The structures were fabricated by laser direct writing via two-photons polymerization of IP-L780 photopolymer. They comprised of hexagonal and ellipsoidal units 80 &micro, m in length, 40 &micro, m in width and 14 &micro, m height, separated by 20 &micro, m pillars. Structures&rsquo, functionalization was achieved via dip coating in Col/CT blends with specific blending ratios. The osteogenic role of Col/CT functionalization of the 3D structures was confirmed by biological assays concerning the expression of alkaline phosphatase (ALP) and osteocalcin secretion as osteogenic markers and Alizarin Red (AR) as dye for mineral deposits in osteoblast-like cells seeded on the structures. The structures having ellipsoidal units showed the best results, but the trends were similar for both ellipsoidal and hexagonal units. The strongest osteogenic effect was obtained for Col/CT blending ratio of 20/80, as demonstrated by the highest ALP activity, osteocalcin secretion and AR staining intensity in the seeded cells compared to all the other samples.

In an attempt to develop drug delivery systems that bypass the blood–brain barrier (BBB) and prevent liver and intestinal degradation, it was concluded that nasal medication meets these criteria and can be used for drugs that have these drawbacks. The aim of this review is to present the influence of the properties of chitosan and its derivatives (mucoadhesion, permeability enhancement, surface tension, and zeta potential) on the development of suitable nasal drug delivery systems and on the nasal bioavailability of various active pharmaceutical ingredients. Interactions between chitosan and proteins, lipids, antigens, and other molecules lead to complexes that have their own applications or to changing characteristics of the substances involved in the bond (conformational changes, increased stability or solubility, etc.). Chitosan and its derivatives have their own actions (antibacterial, antifungal, immunostimulant, antioxidant, etc.) and can be used as such or in combination with other molecules from the same class to achieve a synergistic effect. The applicability of the properties is set out in the second part of the paper, where nasal formulations based on chitosan are described (vaccines, hydrogels, nanoparticles, nanostructured lipid carriers (NLC), powders, emulsions, etc.).

The fabrication of complex, reproducible, and accurate micro-and nanostructured interfaces that impede the interaction between material’s surface and different cell types represents an important objective in the development of medical devices. This can be achieved by topographical means such as dual-scale structures, mainly represented by microstructures with surface nanopatterning. Fabrication via laser irradiation of materials seems promising. However, laser-assisted fabrication of dual-scale structures, i.e., ripples relies on stochastic processes deriving from laser–matter interaction, limiting the control over the structures’ topography. In this paper, we report on laser fabrication of cellrepellent dual-scale 3D structures with fully reproducible and high spatial accuracy topographies. Structures were designed as micrometric “mushrooms” decorated with fingerprint-like nanometric features with heights and periodicities close to those of the calamistrum, i.e., 200–300 nm. They were fabricated by Laser Direct Writing via Two-Photon Polymerization of IP-Dip photoresist. Design and laser writing parameters were optimized for conferring cell-repellent properties to the structures, even for high cellular densities in the culture medium. The structures were most efficient in repelling the cells when the fingerprint-like features had periodicities and heights of ∼=200 nm, fairly close to the repellent surfaces of the calamistrum. Laser power was the most important parameter for the optimization protocol.

Implant- related infections are a consequence of microbial’ adhesion to an implant surface followed by biofilm development on the implanted device. Chemical and biological functionalization of medical surfaces represents topical tactic of enhancing biocompatibility, together with the prevention of bacterial contamination and biofilm inhibition. For this purpose, we focused our work on laser surface modification of medical devices. We prepared nanoparticles of Fe3O4 loaded with Nigella sativa oil by a modified co-precipitation method in aqueous solution of NH4OH by oil-in-water emulsion. For further studies, we mixed them with poly(lactic-co-glycolic acid) spheres. The functionalized nanoparticles were deposited on glass and silicone surfaces by Matrix Assisted Pulsed Laser Evaporation technique. The influence of experimental factors, such as laser fluences was studied. The obtained thin coatings were analyzed by high resolution transmission electron microscopy, scanning electron microscopy and infrared microscopy. The most suitable coatings were selected and tested against a broad spectrum of pathogens found in the most implant rejection issues, such as S. aureus, E. coli and C. albicans, at different time intervals and proved to limit microbial colonization and biofilm formation. In addition, biocompatibility studies using MG-63 cells adopting MTS assay confirmed the possible use of the obtained thin coatings to safely modify medical surfaces.

We report on the successful laser transfer of biocompatible composite coatings based on polyaniline (PANI) embedded with magnetite (PANI-Fe3O4) and Lincomycin hydrochloride (PANI-Lincomycin) or Lincomycin-functionalized magnetite (PANI-Fe3O4@Lincomycin) by matrix assisted pulsed laser evaporation (MAPLE) technique. The physico-chemical investigations revealed relevant data regarding the stoichiometric deposition, morphology and topography of the as-deposited coatings. Regarding the MAPLE coatings, the FTIR studies evidenced the vibrational bands characteristic to pristine PANI material, while the SEM investigations unveiled a preferential particulate morphology (with aggregates shape and size depending on the deposited material). Additionally, the AFM measurements indicated variations of RMS value, following the Lincomycin and magnetite incorporation. The wettability measurements displayed a hydrophilic behavior of the synthesized coatings, while the electrochemical studies emphasized an enhanced resistance against corrosion in simulated body fluid when compared with bare Ti. Cellular viability, immunofluorescence and SEM results proved that the MAPLE coatings were suitable materials for beneficial adhesion, spreading and proliferation of osteoblast-like cells (MG-63). Moreover, an increased efficiency was evidenced against Staphylococcus aureus biofilm development. The multifunctional properties of the laser processed composite coatings – confirmed by cumulative biocompatible, antimicrobial and anticorrosive behaviors – recommend them as promising solutions for biomedical applications.

The aim of this study was the development and optimization of chitosan and hydroxypropyl methylcellulose (HPMC) in situ gelling systems, loaded with bupivacaine hydrochloride for topical ocular administration. This study is based on the properties of two polymers: chitosan, which has mucoadhesive action and is a pH-sensitive polymer, but also the cellulose derivative hydroxypropyl methylcellulose, a thermosensitive polymer which has mucoadhesive properties and increases the viscosity of systems. The analysis and optimization of in situ gelling systems were performed based on an experimental design and response surface methodology. The following formulation parameters were considered: X1 = chitosan concentration (0.5%, 1%), X2 = HPMC E 5 LV concentration (2%, 5%) and X3 = Chitosan/HPMC E 5 LV ratio (1/1, 2/1). In addition, the parameters to be optimized were represented by the contact angle (CA (°)), viscosity and cumulative percentage of bupivacaine hydrochloride released in vitro. The results indicate that the designed in situ gelling systems are suitable for bupivacaine prolonged ophthalmic release and overcome the principal disadvantages of the liquid’s ocular formulations. An immediate therapeutic effect corresponding to ocular anesthetic installation was assured in the first stage: burst bupivacaine release. In the second phase, the gradual drug release was assured for over 6 h. This drug release profile, together with the corresponding rheological profile and a collection of superficial properties for good ocular adhesion balanced with an adequate hydrophilic character, assured the desired quality of the attributes for the proposed systems. The system, based on chitosan 1%, HPMC E 5 LV 5% and a 1/1 polymer ratio, could be a solution for the proposed formulation of in situ gelling colloidal systems, since the viscosity of the system was within the range of the optimal viscosity of the eye, and the amount of bupivacaine hydrochloride released after 6 h was the highest at 69.55%.

Functionalization of nanomaterials can enhance and modulate their properties and behaviour, enabling characteristics suitable for medical applications. Magnetite (Fe3O4) nanoparticles are one of the most popular types of nanomaterials used in this field, and many technologies being already translated in clinical practice. This article makes a summary of the surface modification and functionalization approaches presented lately in the scientific literature for improving or modulating magnetite nanoparticles for their applications in nanomedicine.

Composite thin coatings of conductive polymer (polyaniline grafted lignin, PANI-LIG) embedded with aminoglycoside Gentamicin sulfate (GS) or magnetite nanoparticles loaded with GS (Fe3O4@GS) were deposited by the matrix-assisted pulsed laser evaporation (MAPLE) technique. The aim was to obtain such nanostructured coatings for titanium-based biomedical surfaces, which would induce multi-functional properties to implantable devices, such as the controlled release of the therapeutically active substance under the action of a magnetic and/or electric field. Thus, the unaltered laser transfer of the initial biomaterials was reported, and the deposited thin coatings exhibited an appropriate nanostructured surface, suitable for bone-related applications. The laser processing of PANI-LIG materials had a meaningful impact on the composites&rsquo, wettability, since the contact angle values corresponding to the composite laser processed materials decreased in comparison with pristine conductive polymer coatings, indicating more hydrophilic surfaces. The corrosion resistant structures exhibited significant antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans strains. In vitro cytotoxicity studies demonstrated that the PANI-LIG-modified titanium substrates can allow growth of bone-like cells. These results encourage further assessment of this type of biomaterial for their application in controlled drug release at implantation sites by external activation.

The current challenges of conventional pharmaceutical strategies result from various treatment-related and patient-related shortcomings, such as nonspecificity or nonselectivity of the selected therapeutic agent, inadequate or incorrect treatment administration, and pharmacological-derived side effects. To overcome such unwanted events, tremendous interdisciplinary knowledge has been oriented toward the nanotechnology-derived development and implementation of novel enhanced pharmaceuticals. As it currently stands, by combining the vast output and impressive versatility of nanotechnology with current and future pharmacological and clinical knowledge, the global desideratum is to be one step closer toward a fine-tuned “personal” medicine, its road toward perfection being a function of current technological capabilities. The beneficial conjunction between nanotechnology and biomedical sciences enables remarkable results with respect to modern pharmacotherapy. In the following sections of this chapter we will discuss a few of the current possibilities entailed in nanotechnology-related pharmaceuticals, with a particular emphasis on novel biocompatible systems based on natural-derived chitosan and hyaluronic acid polysaccharides.

Traditionally, tissue engineering has evolved toward the development of functional substitutes for whole organs or parts, to replace, restore, maintain, or improve their function. This continually evolving field has been improving, as a result of the emerging technologies in materials science, leading to the obtaining of functional scaffolds that are able to support and maintain the attachment, proliferation, and differentiation of cells. However, these discoveries not only have implications in regenerative medicine, but also might have applications in fundamental research and testing of drug candidates. In this regard, the scientific community has translated the new technological discoveries in the tissue engineering field, to obtain in vitro and in vivo models that better mimic the architecture and function of certain structures and organs, to help in the study of their phenotype and biological mechanisms. One example is the field of cancer research, with implications into both fundamentals of the disease, but also in the discovery and testing of new treatment options. The purpose of this chapter is to present an up to date overview of the in vitro and in vivo technologies in the tissue engineering field, that have applications in the development of better tumor models for the study of mechanisms and possible therapeutic approaches.

This study aims to investigate whether ionizing radiation combined with doxorubicin-conjugated iron oxide nanoparticles (NP-DOX) improves the internalization and cytotoxic effects of the nano-carrier-mediated drug delivery in MG-63 human osteosarcoma cells. NP-DOX was designed and synthesized using the co-precipitation method. Highly stable and crystalline nanoparticles conjugated with DOX were internalized in MG-63 cells through macropinocytosis and located in the perinuclear area. Higher nanoparticles internalization in MG-63 cells previously exposed to 1 Gy X-rays was correlated with an early accumulation of cells in G2/M, starting at 12 h after treatment. After 48 h, the application of the combined treatment led to higher cytotoxic effects compared to the individual treatment, with a reduction in the metabolic capacity and unrepaired DNA breaks, whilst a low percent of arrested cells, contributing to the commitment of mitotic catastrophe. NP-DOX showed hemocompatibility and no systemic cytotoxicity, nor histopathological alteration of the main organs.

Gold nanoparticles of comparable size were synthetized using honey mediated green method (AuNPs@honey) and citrate mediated Turkevich method (AuNPs@citrate). Their colloidal behavior in two cell media DMEM and RPMI, both supplemented with 10% FBS, was systematically investigated with different characterization techniques in order to evidence how the composition of the media influences their stability and the development of protein/NP complex. We revealed the formation of the protein corona which individually covers the nanoparticles in RPMI media, like a dielectric spacer according to UV-Vis spectroscopy, while DMEM promotes more abundant agglomerations, clustering together the nanoparticles, according to TEM investigations. In order to evaluate the biological impact of nanoparticles, B16 melanoma and L929 mouse fibroblasts cells were used to carry out the viability assays. Generally, the L929 cells were more sensitive than B16 cells to the presence of gold nanoparticles. Measurements of cell viability, proliferation and apoptotic activities of B16 cells indicated that the effects induced by AuNPs@honey were slightly similar to those induced by AuNPs@citrate, however, the toxic response improved in the L929 fibroblast cells following the treatment with AuNPs@honey within the same concentration range from 1 μg/ml to 15 μg/ml for 48 h. Results showed that honey mediated synthesis generates nanoparticles with reduced toxicity trends depending on the cell type, concentration of nanoparticles and exposure time toward various biomedical applications.

The aim of our study was to obtain and evaluate the properties of polymeric coatings based on poly(lactic-co-glycolic) acid (PLGA) embedded with magnetite nanoparticles functionalized with commercial antimicrobial drugs. In this respect, we firstly synthesized the iron oxide particles functionalized (@) with the antibiotic Cefepime (Fe3O4@CEF). In terms of composition and microstructure, the as-obtained powdery sample was investigated by means of grazing incidence X-ray diffraction (GIXRD), thermogravimetric analysis (TGA), scanning and transmission electron microscopy (SEM and TEM, respectively). Crystalline and nanosized particles (~5 nm mean particle size) with spherical morphology, consisting in magnetite core and coated with a uniform and reduced amount of antibiotic shell, were thus obtained. In vivo biodistribution studies revealed the obtained nanoparticles have a very low affinity for innate immune-related vital organs. Composite uniform and thin coatings based on poly(lactide-co-glycolide) (PLGA) and antibiotic-functionalized magnetite nanoparticles (PLGA/Fe3O4@CEF) were subsequently obtained by using the matrix assisted pulsed laser evaporation (MAPLE) technique. Relevant compositional and structural features regarding the composite coatings were obtained by performing infrared microscopy (IRM) and SEM investigations. The efficiency of the biocompatible composite coatings against biofilm development was assessed for both Gram-negative and Gram-positive pathogens. The PLGA/Fe3O4@CEF materials proved significant and sustained anti-biofilm activity against staphylococcal and Escherichia coli colonisation.

We designed, fabricated and optimized 3D biomimetic magnetic structures that stimulate the osteogenesis in static magnetic fields. The structures were fabricated by direct laser writing via two-photon polymerization of IP-L780 photopolymer and were based on ellipsoidal, hexagonal units organized in a multilayered architecture. The magnetic activity of the structures was assured by coating with a thin layer of collagen-chitosan-hydroxyapatite-magnetic nanoparticles composite. In vitro experiments using MG-63 osteoblast-like cells for 3D structures with gradients of pore size helped us to find an optimum pore size between 20–40 µm. Starting from optimized 3D structures, we evaluated both qualitatively and quantitatively the effects of static magnetic fields of up to 250 mT on cell proliferation and differentiation, by ALP (alkaline phosphatase) production, Alizarin Red and osteocalcin secretion measurements. We demonstrated that the synergic effect of 3D structure optimization and static magnetic stimulation enhances the bone regeneration by a factor greater than 2 as compared with the same structure in the absence of a magnetic field.

A major limitation of existing 3D implantable structures for bone tissue engineering is that most of the cells rapidly attach on the outer edges of the structure, restricting the cells penetration into the inner parts and causing the formation of a necrotic core. Furthermore, these structures generally possess a random spatial arrangement and do not preserve the isotropy on the whole volume. Here, we report on the fabrication and testing of an innovative 3D hierarchical, honeycomb-like structure (HS), with reproducible and isotropic arhitecture, that allows in 'volume' migration of osteoblasts. In particular, we demonstrate the possibility to control the 3D spatial cells growth inside these complex architectures by adjusting the free spaces inside the structures. The structures were made of vertical microtubes arranged in a mulitlayered configuration, fabricated via laser direct writing by two photons polymerization of the IP-L780 photopolymer. In vitro tests performed in MG-63 osteoblast-like cells demonstrated that the cells migration inside the 3D structures is conducted by the separation space between the microtubes layers. Specifically, for layers separation between 2 and 10 μm, the cells gradually penetrated between the microtubes. Furthermore, these structures induced the strongest cells osteogenic differentiation and mineralization, with ALP activity 1.5 times stronger, amount of calcified minerals 1.3 times higher and osteocalcin secretion increased by 2.3 times compared to the other structures. On the opposite, for layers separation less than 2 μm and above 10 μm, the cells were not able to make interconnections and exhibited poor mineralization ability.

The attention for gold nanoparticles (AuNPs) has recently grown, especially regarding its applications in biomedicine, like cancer treatment and immunization by nano-vaccines. The interest for this type of nanoparticles is given by their ability to penetrate blood vessels and tissue barriers and to be targeted to a specific cell by means of specifically functionalized molecules. Moreover, AuNPs posses special properties which make them useful in concomitant diagnostic by medical imaging and tumor ablation by means of photothermal activation.

The increasing rate of antibiotic resistant bacteria associated with nosocomial infections in severely ill patients has urged the need for new antibacterial therapies. Nanostructured materials represent emerging innovative approaches to controlled delivery of different antimicrobial drugs. Delivery systems encapsulating natural compounds with antibacterial effects, such as essential oils have shown a great potential. Herein we report the development of SiO2 mesoporous nanosystems loaded with eucalyptus (EUC), orange (ORA), and cinnamon (CIN) essential oils. These systems were characterized with respect to morphology (using scanning electron microscopy, SEM, and transmission electron microscopy, TEM), porosity (by BET and TEM analysis), chemical composition (by X-ray diffraction, XRD, and Fourier transform infrared spectrometry, FTIR) and loading capacity (by thermogravimetric analysis, TGA). The anti-bacterial and anti-adherence effects were tested against clinically relevant microbial species (Staphylococcus aureus ATCC 25923; Escherichia coli ATCC 25922; and Candida albicans ATCC 10231), while the biocompatibility was evaluated by in vitro tests with L929 mouse fibroblast cells.

The access for safe drinking water is a problem concerning both developed and developing countries, as pure water sources are getting limited. Worldwide, people are getting exposed to a variety of waterborne diseases or heavy metal poisoning. For this reason, new and improved methods for water purification are needed. This chapter is mainly focused on the removal of microorganisms from contaminated water by using different filtering membranes and discusses some examples of nanofiltering membranes from the scientific literature: membranes embedded with carbon nanotubes, respectively, membranes embedded with silver nanoparticles. Their properties and evaluation is discussed.

The current trend regarding the development and implementation of novel strategies for decontamination of polluted water became an important aspect of modern community. Given the current drawbacks of conventional technologies involved in the removal of water contaminants and the impressive potential of nanotechnology-based processes, promising unconventional approaches have been successfully developed. Moreover, the attention has been straightened toward ecofriendly novel technologies; either we are considering the beneficial role of microscopic organisms or the ecological aspects of such strategies. The aim of this chapter is to emphasize the impressive potential of both nonpathogenic and pathogenic microorganisms in water self-purification and water purification, respectively.

Given the peculiar properties of silver nanorelated structures and the current global tendency toward a patient-oriented medical practice, the scientific community and health-care professionals straightened their attention toward the experimental design, development, and assessment of novel silver-based nanosystems for biomedical applications. In particular, the attractive physicochemical and functional versatility of nano Ag resulted in employing silver-based nanostructures as promising tools for unconventional strategies in cancer therapy, either as biosensing and bioimaging platforms, drug delivery carriers or enhanced chemotherapy, and radiotherapy. Therefore, within this chapter, we review the latest results reported in novel silver-based nanotechnology-derived systems as promising strategies for modern cancer therapy.

In the context of increased numbers of multidrug-resistant bacteria cases, new methods for combating biofilm-associated infections have been proposed. One of these methods refers to the development of specifically designed coatings for implants and medical devices. Laser-assisted methods have offered promising solutions in the processing of different thin films with modulated properties. This chapter reviews recent examples of antimicrobial coatings obtained using this type of method, focusing on pulsed laser deposition and matrix-assisted pulsed laser deposition. The ion implantation approach is also discussed, because this is becoming increasingly used in the modification of implants and medical device surfaces to obtain improved properties.

The growth and development of the rubber industry was directly correlated with the increasing population needs, leading to the development of newly improved materials for different uses. This chapter summarizes the latest research regarding the obtaining of new rubber-based blends with improved properties for use in certain applications such as (bio)medical, packaging, military and aerospace, tires, or structural applications. We have also featured the trend of recycling, which has great implications in environmental and social impact because there are enormous resources to recover rubber and obtain new products.

The aim of our research activity was to obtain a biocompatible nanostructured composite based on naturally derived biopolymers (chitin and sodium alginate) loaded with commercial antibiotics (either Cefuroxime or Cefepime) with dual functions, namely promoting wound healing and assuring the local delivery of the loaded antibiotic. Compositional, structural, and morphological evaluations were performed by using the thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and fourier transform infrared spectroscopy (FTIR) analytical techniques. In order to quantitatively and qualitatively evaluate the biocompatibility of the obtained composites, we performed the tetrazolium-salt (MTT) and agar diffusion in vitro assays on the L929 cell line. The evaluation of antimicrobial potential was evaluated by the viable cell count assay on strains belonging to two clinically relevant bacterial species (i.e., Escherichia coli and Staphylococcus aureus).

Since the discovery of quantum dots (QDs) and their optical properties, many attempts have been made in order to obtain more efficient nanosystems, to be used as a tool in an easier diagnostic or for higher-resolution detection of molecules/intracellular components. Nowadays, these attempts have been channeled toward specificity and targeting. These can be done by applying specific functionalizing agents to less toxic nanoparticles which are actively transported at the site of action. This chapter focuses on some popular examples of nanoparticles which are currently used in different imaging techniques: QDs in fluorescence imaging, iron oxide nanoparticles in magnetic resonance imaging or computer tomography, and respectively silver nanoparticles in various techniques.

Nowadays, drug-resistant bacteria are a serious problem concerning the international health organizations, as high-dose treatments are necessary to overcome these infections, inducing higher toxicity, longer hospital stays, and increased mortality. Due to the progress that has been made in nanotechnology, some inorganic materials, that have already been known to possess antimicrobial properties, have been transformed into nanoparticles. Thus, silver, copper, or titanium dioxide nanoparticles were developed and administered as drinkable colloids, or transformed into nanostructured coatings in medical devices. Some of these are clinically approved and the mechanisms of toxicity are almost clearly elucidated, however, newly improved systems are continuously being developed, in order to overcome the shortcomings of the existing ones and to improve living standards. This chapter makes a summary of the existing studies regarding the mechanisms of toxicity for some inorganic nanoparticles against prokaryote cells. Also, some newly developed model systems are described, focusing on the biosynthesized nanoparticles, which are clearly a trend in this field.

Although multiple approaches have emerged for reducing the microbial resistance and morbidity and mortality associated with persistent infections, current statistics reveal their poor efficiency. In this context, recent nanotechnological progress offers a new perspective in infection control, supported by highly specialized and efficient nanomaterials that can control the delivery, release, and efficiency of antimicrobial drugs in particular infections, thus reducing side effects and probably resistance rates. This chapter presents and discusses the current microbial resistance situation, which affects the entire world population and the perspective imposed by magnetite-based nanomaterials in developing alternative therapeutic and preventive antipathogenic approaches. Antimicrobial-functionalized magnetite nanoparticles, polymeric magnetite-based biomaterials, and enzyme-immobilization procedures in magnetic nanosystems with a great impact on antiinfectious therapies are also highlighted.

In this paper we focused our studies on functionalization of DNA and of collagen with active molecules and thin film processing, their photostability in view of their further application in electronics and photonics as all optical switching elements, bioleds, optical memories, light amplifies, electro-optic modulators, etc. We have also addressed very important point for the practical application of these materials, not studied previously, which is the photo stability of these materials. If they have to work in photonic systems they have to exhibit an excellent stability in time and at the operation temperature range. The main interest for biopolymers arises from the fact that they are renewable, derived from waste of meat industry and they are biodegradable materials.

The impressive diversity related to etiologic factors and the distinctive genetic and immunological behavior attained by various conditions represent the fundamental reasons for high-rated inefficient and eventual hazardous strategies entailed by conventional healthcare practice. Thanks to the tremendous progress reported in nanotechnology during the last decades, various unconventional and promising strategies have been successfully developed and examined with respect to potential genuine biomedical applications. Given the amazing possibility to manipulate matter at a molecular and atomic level and the incessant need to design and implement personalized therapies, various nanosized systems have thus been engineered. Among the newly developed nanomaterials, metallic nanoparticles have gain attention during the intense biomedical research activity, thanks to their peculiar size-conditioned properties. An efficient therapeutic strategy begins with an accurate diagnosis result, so the immediate requirement of such specific detection tools is conspicuous. The use of silver and gold in day-to-day activities is acknowledged since ancient times, but the novel technological opportunities extended their particular applications towards personalized medicine. It is worthy to mention that the unexpected nanodimension-related features of the aforementioned noble metals strongly recommend them for a large number of current applications in nanomedicine, including novel and specific metallic nanostructures used in diagnostics.

This study is presenting the theoretical approach and the practical results of a precise activity involved in the hologram reconstruction in order to find the optimally focused image of MG63 osteoblast-like cells cultivated on polymeric flat substrates. The morphology and dynamic of the cell is investigated by digital holographic microscopy (DHM) technique. The reconstruction is digitally performed using an algorithm based on the scalar theory of diffraction in the Fresnel approximation. The quality of the 3D images of the cells is crucially depending on the focusing capability of the reconstruction chain to fit the parameters of the optical recorder, particularly the focusing value. Our proposal to find the focused image is based on the images decomposition on gray levels and their histogram analysis. More precisely the focusing criterion is based on the evaluation of the form of this distribution.

Our review summarizes the latest approaches regarding in vivo biocompatibility evaluation of magnetite nanoparticle-based systems. The paper follows the applications of Fe3O4 nanoparticles in cancer diagnosis and treatment, by means of nanoparticle-mediated magnetic hyperthermia, respectively by targeted delivery of chemotherapeutics. The long-term biodistribution in relevant organisms is also discussed, due to the need of knowing the exact course of magnetite nanoparticles after the fulfillment of their function. Several commercial Fe3O4 systems used as contrast agents for medical imaging and cancer treatment by hyperthermia are briefly presented in the last section.