Search

In this work, we analyze the optimum annealing conditions for the activation of Ge-implanted β-Ga2O3 in order to reach low ohmic contact resistances. The experiments involved the use of a pulsed rapid thermal annealing treatment at temperatures between 900 and 1200 °C in nitrogen atmosphere. Our investigations show remarkable changes in the surface morphology involving increased surface roughness after high-temperature annealing above 1000 °C as well as a significant redistribution of the implanted Ge. Nevertheless, the specific contact resistance is strongly reduced by one order of magnitude after annealing at 1100 °C, reaching a record value of 4.8 × 10−7 Ω cm2 at an implantation activation efficiency of 14.2%. The highest activation efficiency of 19.2% and lowest sheet resistances were reached upon annealing at 1200 °C, which, in turn, showed inferior ohmic contact properties due to a severe increase of the surface roughness. Our results verify the high potential of applying high-temperature annealing processes above 1000 °C after Ge implantation for reaching low ohmic contact resistances to β-Ga2O3.

In this work, we train a hybrid deep-learning model (fDNN, Forest Deep Neural Network) to predict the doping level measured from the Hall Effect measurement at room temperature and to investigate the doping behavior of Si dopant in both (100) and (010) β-Ga2O3 thin film grown by the metalorganic vapor phase epitaxy (MOVPE). The model reveals that a hidden parameter, the Si supplied per nm (mol/nm), has a dominant influence on the doping process compared with other process parameters. An empirical relation is concluded from this model to estimate the doping level of the grown film with the Si supplied per nm (mol/nm) as the primary variable for both (100) and (010) β-Ga2O3 thin film. The outcome of the work indicates the similarity between the doping behavior of (100) and (010) β-Ga2O3 thin film via MOVPE and the generality of the results to different deposition systems.

IntroductionAccurate detection and segmentation of the intraprostatic gross tumor volume (GTV) is pivotal for radiotherapy (RT) in primary prostate cancer (PCa) since it influences focal therapy target volumes and the patients’ cT stage. The study aimed to compare the performance of multiparametric resonance imaging (mpMRI) with [18F] PSMA-1007 positron emission tomography (PET) for intraprostatic GTV detection as well as delineation and to evaluate their respective influence on RT concepts.Materials and MethodsIn total, 93 patients from two German University Hospitals with [18F] PSMA-1007-PET/CT and MRI (Freiburg) or [18F] PSMA-1007-PET/MRI (Dresden) were retrospectively enrolled. Validated contouring techniques were applied for GTV-PET and -MRI segmentation. Absolute tumor volume and cT status were determined for each imaging method. The PCa distribution from histopathological reports based on biopsy cores and surgery specimen was used as reference in terms of laterality (unilateral vs. bilateral).ResultsIn the Freiburg cohort (n = 84), mpMRI and PET detected in median 2 (range: 1–5) and 3 (range: 1–8) GTVs, respectively (p < 0.01). The median GTV-MRI was significantly smaller than the GTV-PET, measuring 2.05 vs. 3.65 ml (p = 0.0005). PET had a statistically significant higher concordance in laterality with surgery specimen compared to mpMRI (p = 0.04) and biopsy (p < 0.01), respectively. PSMA PET led to more cT2c and cT3b stages, whereas cT3a stage was more pronounced in mpMRI. Based on the cT stage derived from mpMRI and PET information, 21 and 23 as well as 59 and 60 patients, respectively, were intermediate- and high-risk according to the National Comprehensive Cancer Network (NCCN) v1.2022 criteria. In the Dresden cohort (n = 9), similar results were observed.ConclusionIntraprostatic GTV segmentation based on [18F] PSMA-1007 PET results in more and larger GTVs compared to mpMRI. This influences focal RT target volumes and cT stage definition, but not the NCCN risk group.

Accurate detection and segmentation of the intraprostatic gross tumor volume (GTV) is pivotal for radiotherapy (RT) in primary prostate cancer (PCa) since it influences focal therapy target volumes and the patients' cT stage. The study aimed to compare the performance of multiparametric resonance imaging (mpMRI) with [In total, 93 patients from two German University Hospitals with [In the Freiburg cohort (Intraprostatic GTV segmentation based on [18F] PSMA-1007 PET results in more and larger GTVs compared to mpMRI. This influences focal RT target volumes and cT stage definition, but not the NCCN risk group.

Absrtract In this work, we comprehensively investigate the development of unwanted parasitic particles in the MOVPE chamber while growing μm level films. The density of the parasitic particles is found to be pronounced at film thicknesses starting from >1.5 to 2 μm. These particles seem to induce structural defects such as twin lamellae, thereby harming the electrical properties of the grown film. The origin of the parasitic particle is attributed to the parasitic reactions within the chamber triggered by the promoted gas-phase reactions during the growth process, which can be largely reduced by increasing the total gas flow and decreasing the showerhead distance to the susceptor. A film thickness of up to 4 μm has been achieved after minimizing the density of parasitic particles. Thereby, RT Hall measurements reveal carrier mobilities of 160 cm2V−1s−1 at carrier concentrations of 5.7 × 1016 cm−3.

This work investigated the metalorganic vapor-phase epitaxy (MOVPE) of (100) β-Ga2O3 films with the aim of meeting the requirements to act as drift layers for high-power electronic devices. A height-adjustable showerhead achieving a close distance to the susceptor (1.5 cm) was demonstrated to be a critical factor in increasing the stability of the Ga wetting layer (or Ga adlayer) on the surface and reducing parasitic particles. A film thickness of up to 3 μm has been achieved while keeping the root mean square below 0.7 nm. Record carrier mobilities of 155 cm2 V−1 s−1 (2.2 μm) and 163 cm2 V−1 s−1 (3 μm) at room temperature were measured for (100) β-Ga2O3 films with carrier concentrations of 5.7 × 1016 and 7.1 × 1016 cm−3, respectively. Analysis of temperature-dependent Hall mobility and carrier concentration data revealed a low background compensating acceptor concentration of 4 × 1015 cm−3.

We have systematically studied the growth, by the Czochralski method, and basic physical properties of a 2 cm and 2 in. diameter bulk β-(AlxGa1−x)2O3 single crystal with [Al] = 0–35 mol. % in the melt in 5 mol. % steps. The segregation coefficient of Al in the Ga2O3 melt of 1.1–1.2 results in a higher Al content in the crystals than in the melt. The crystals were also co-doped with Si or Mg. [Al] = 30 mol. % in the melt (33–36 mol. % in the crystals) seems to be a limit for obtaining bulk single crystals of high structural quality suitable for homoepitaxy. The crystals were either semiconducting (no intentional co-dopants with [Al] = 0–30 mol. % and Si-doped with [Al] = 15–20 mol. %), degenerately semiconducting (Si-doped with [Al] ≤ 15 mol. %), or semi-insulating ([Al] ≥ 25 mol. % and/or Mg-doped). The full width at half maximum of the rocking curve was 30–50 arcsec. The crystals showed a linear but anisotropic decrease in all lattice constants and a linear increase in the optical bandgap (5.6 eV for [Al] = 30 mol. %). The room temperature electron mobility at similar free electron concentrations gradually decreases with [Al], presumably due to enhanced scattering at phonons as the result of a larger lattice distortion. In Si co-doped crystals, the scattering is enhanced by ionized impurities. Measured electron mobilities and bandgaps enabled to estimate the Baliga figure of merit for electronic devices.

Beta gallium oxide (β-Ga2O3) is a promising ultra-wide bandgap semiconductor with attractive physical properties for next-generation high-power devices, radio frequency electronics, and solar-blind ultraviolet radiation detectors. Here, we present an overview and perspective on the development of MOVPE-grown (100) β-Ga2O3 thin films and its role in supplementing high-power electronics. We review the development path of the growth process on (100) β-Ga2O3 thin films with a discussion regarding the solved and remaining challenges. The structural defect formation mechanism, substrate treatment strategies, and different growth windows are analyzed to optimize the grown film to fulfill the requirements for device fabrication. Toward industrial applications, MOVPE-grown β-Ga2O3 thin films are evaluated in two aspects: thick layers with smooth surface roughness and the electrical properties in terms of high carrier mobility and low doping concentration. Based on the reviewed results, we propose strategies in substrate preparation treatments and supportive tools such as the machine learning approaches for future growth process optimization and envision the rising interest of the β-Ga2O3-related alloy, β-(AlxGa1−x)2O3.

A Langmuir adsorption model of the Si incorporation mechanism into metalorganic vapor-phase epitaxy grown (100) β-Ga2O3 thin films is proposed in terms of the competitive surface adsorption process between Si and Ga atoms. The outcome of the model can describe the major feature of the doping process and indicate a growth rate-dependent doping behavior, which is validated experimentally and further generalized to different growth conditions and different substrate orientations.