Search

In the present study, we addressed the knowledge gaps regarding the agglomeration behavior and fate of food-grade titanium dioxide (E 171) in human gastrointestinal digestion (GID). After thorough multi-technique physicochemical characterization including TEM, single-particle ICP-MS (spICP-MS), CLS, VSSA determination and ELS, the GI fate of E 171 was studied by applying the in vitro GID approach established for the regulatory risk assessment of nanomaterials in Europe, using a standardized international protocol. GI fate was investigated in fasted conditions, relevant to E 171 use in food supplements and medicines, and in fed conditions, with both a model food and E 171-containing food samples. TiO2 constituent particles were resistant to GI dissolution, and thus, their stability in lysosomal fluid was investigated. The biopersistence of the material in lysosomal fluid highlighted its potential for bioaccumulation. For characterizing the agglomeration degree in the small intestinal phase, spICP-MS represented an ideal analytical tool to overcome the limitations of earlier studies. We demonstrated that, after simulated GID, in the small intestine, E 171 (at concentrations reflecting human exposure) is present with a dispersion degree similar to that obtained when dispersing the material in water by means of high-energy sonication (i.e., ≥70% of particles

A comprehensive physicochemical characterization of heterogeneous nanoplastic (NPL) samples remains an analytical challenge requiring a combination of orthogonal measurement techniques to improve the accuracy and robustness of the results. Here, batch methods, including dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), tunable resistive pulse sensing (TRPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM), as well as separation/fractionation methods such as centrifugal liquid sedimentation (CLS) and field-flow fractionation (FFF)–multi-angle light scattering (MALS) combined with pyrolysis gas chromatography mass spectrometry (pyGC–MS) or Raman microspectroscopy (RM) were evaluated for NPL size, shape, and chemical composition measurements and for quantification. A set of representative/test particles of different chemical natures, including (i) polydisperse polyethylene (PE), (ii) (doped) polystyrene (PS) NPLs, (iii) titanium dioxide, and (iv) iron oxide nanoparticles (spherical and elongated), was used to assess the applicability and limitations of the selected methodologies. Particle sizes and number-based concentrations obtained by orthogonal batch methods (DLS, NTA, TRPS) were comparable for monodisperse spherical samples, while higher deviations were observed for polydisperse, agglomerated samples and for non-spherical particles, especially for light scattering methods. CLS and TRPS offer further insight with increased size resolution, while detailed morphological information can be derived by electron microscopy (EM)–based approaches. Combined techniques such as FFF coupled to MALS and RM can provide complementary information on physical and chemical properties by online measurements, while pyGC–MS analysis of FFF fractions can be used for the identification of polymer particles (vs. inorganic particles) and for their offline (semi)quantification. However, NPL analysis in complex samples will continue to present a serious challenge for the evaluated techniques without significant improvements in sample preparation. Graphical abstract

Emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants diminishes the efficacy of vaccines and antiviral monoclonal antibodies. Continued development of immunotherapies and vaccine immunogens resilient to viral evolution is therefore necessary. Using coldspot-guided antibody discovery, a screening approach that focuses on portions of the virus spike glycoprotein that are both functionally relevant and averse to change, we identified human neutralizing antibodies to highly conserved viral epitopes. Antibody fp.006 binds the fusion peptide and cross-reacts against coronaviruses of the four genera, including the nine human coronaviruses, through recognition of a conserved motif that includes the S2′ site of proteolytic cleavage. Antibody hr2.016 targets the stem helix and neutralizes SARS-CoV-2 variants. Antibody sd1.040 binds to subdomain 1, synergizes with antibody rbd.042 for neutralization, and, similar to fp.006 and hr2.016, protects mice expressing human angiotensin-converting enzyme 2 against infection when present as a bispecific antibody. Thus, coldspot-guided antibody discovery reveals donor-derived neutralizing antibodies that are cross-reactive with Orthocoronavirinae, including SARS-CoV-2 variants.

Emergence of SARS-CoV-2 variants diminishes the efficacy of vaccines and antiviral monoclonal antibodies. Continued development of immunotherapies and vaccine immunogens resilient to viral evolution is therefore necessary. Using coldspot-guided antibody discovery, a screening approach that focuses on portions of the virus spike that are both functionally relevant and averse to change, we identified human neutralizing antibodies to highly conserved viral epitopes. Antibody fp.006 binds the fusion peptide and cross-reacts against coronaviruses of the fourgenera, including the nine human coronaviruses, through recognition of a conserved motif that includes the S2’ site of proteolytic cleavage. Antibody hr2.016 targets the stem helix and neutralizes SARS-CoV-2 variants. Antibody sd1.040 binds to subdomain 1, synergizes with antibody rbd.042 for neutralization and, like fp.006 and hr2.016, protects mice when present as bispecific antibody. Thus, coldspot-guided antibody discovery reveals donor-derived neutralizing antibodies that are cross-reactive withOrthocoronavirinae, including SARS-CoV-2 variants.One sentence summaryBroadly cross-reactive antibodies that protect from SARS-CoV-2 variants are revealed by virus coldspot-driven discovery.

Microplastics (MPs) represent a worldwide emerging relevant concern toward human and environmental health due to their intentional or unintentional release. Human exposure to MPs by inhalation is predicted to be among the most hazardous. MPs include both engineered, or primary MPs, and secondary MPs, materials obtained by fragmentation from any plastic good. The major part of the environmental MPs is constituted by the second ones that are irregular in size, shape and composition. These features make the study of the biological impact of heterogenous MPs of extremely high relevance to better estimate the real toxicological hazards of these materials on human and environmental organisms. The smallest fractions of plastic granules, relying on the micron-sized scale, can be considered as the most abundant component of the environmental MPs, and for this reason, they are typically used to perform toxicity tests using in vitro systems representative of an inhalation exposure scenario. In the present work, MPs obtained from industrial treatment of waste plastics (wMPs < 50 μm) were investigated, and after the physico-chemical characterization, the cytotoxic, inflammatory and genotoxic responses, as well as the modality of wMPs interactions with alveolar lung cells, were determined. Obtained results indicated that, at high concentrations (100 μg/ml) and prolonged exposure time (48 h), wMPs affect biological responses by inducing inflammation and genotoxicity, as a result of the cell–wMP interactions, also including the uptake of the smaller particles.

Validation of analytical methods for measurements of microplastics (MP) is severely hampered because of a general lack of reference materials, RM. There is a great need to develop such reference materials. This study presents a concept of three-component kit with immobilised MP in solid NaCl, a surfactant and clean water that can be applied for the production of many types of MP RMs. As proof of concept, an RM for polyethylene terephthalate (PET) particles in water was prepared and evaluated for its homogeneity. The particles ranged from 30 μm (Feretmin) to about 200 μm adapted by wet sieving. A specific number of PET particles were immobilized in about 0.29 g of solid NaCl by freeze-drying 1 mL of a NaCl suspension. By using manual and automated counting, twenty reconstituted 1-L water samples were evaluated for homogeneity with respect to number of PET particles from 30 μm to > 200 μm/L of water. The number of particles was 730 ± 120 (mean ± one standard deviation (SD); n = 10) and 865 ± 155 particles (n = 10) obtained by optical microscopy in two independent laboratories. This corresponded to relative SDs of 16.4 and 17.9% and a mean of 797 ± 151 particles (18.9% RSD, for n = 20). Homogeneity studies of the NaCl carrier without reconstitution resulted in 794 ± 60 particles (7.5% RSD). The homogeneity of PET in the salt carrier was also evaluated directly with respect to mass of PET per vial using an ultra-micro balance. An average mass of 293 ± 41 μg of PET was obtained (14, % RSD for n = 14). Micrographs were recorded to demonstrate the absence of major sources of contamination of the RM components. Information about the particle size distribution and particle shapes was obtained by laser diffraction (LD) and dynamic image analysis (DIA). In addition, the identity of the PET polymer was confirmed by Raman and FT-IR spectroscopy. The RM was developed for a large-scale inter-laboratory comparison of PET particles in water (ILC). Based on the homogeneity results, the material was found to be sufficiently homogeneous to be of meaningful use in the ILC. In a 3-day process, more than 500 samples of PET particles in the NaCl carrier were prepared with good potential for further upscaling with respect to the number of vials or with other kinds of polymers. The stability of PET was not evaluated but it was deemed to be stable for the duration of the ILC.

The advancement of analytical methods for nanoparticle measurements is critical both for the growing industrial exploitation of engineered nanoparticles and for developing robust strategies to understand and control the concentration of nanomaterials in humans and the environment. For high value nanoparticles, the measurement of nanoparticle number concentration in a liquid directly impacts the ability to assess the scale and reproducibility of the production process, it allows optimisation of efficiency and supports regulatory compliance. This measurement is also useful to monitor and control the intentional or accidental release of engineered nanoparticles into the environment at the production plant, as well as by end-users., peer-reviewed

Liposomal formulations for the treatment of cancer and other diseases are the most common form of nanotechnology enabled pharmaceuticals (NEPs) submitted for market approval and in clinical application today. The accurate characterization of their physical-chemical properties is a key requirement; in particular, size, size distribution, shape, and physical-chemical stability are key among properties that regulators identify as critical quality attributes. Here we develop and validate an optimized method, based on multi-detector asymmetrical-flow field flow fractionation (MD-AF4) to accurately and reproducibly separate liposomal drug formulations into their component populations and to characterize their associated size and size distribution, whether monomodal or polymodal in nature. In addition, the results show that the method is suitable to measure liposomes in the presence of serum proteins and can yield information on the shape and physical stability of the structures. The optimized MD-AF4 based method has been validated across different instrument platforms, three laboratories, and multiple drug formulations following a comprehensive analysis of factors that influence the fractionation process and subsequent physical characterization. Interlaboratory reproducibility and intra-laboratory precision were evaluated, identifying sources of bias and establishing criteria for the acceptance of results. This method meets a documented high priority need in regulatory science as applied to NEPs such as Doxil and can be adapted to the measurement of other NEP forms (such as lipid nanoparticle therapeutics) with some modifications. Overall, this method will help speed up development of NEPS, and facilitate their regulatory review, ultimately leading to faster translation of innovative concepts from the bench to the clinic. Additionally, the approach used in this work (based on international collaboration between leading non-regulatory institutions) can be replicated to address other identified gaps in the analytical characterization of various classes of NEPs. Finally, a plan exists to pursue more extended interlaboratory validation studies to advance this method to a consensus international standard., Graphical abstract Unlabelled Image

Titanium dioxide is a white colourant authorised as food additive E171 in the EU and is applied in a range of food products. Currently the EU specifications for E171 do not refer to the characterisation of particle size distribution; however, this may be requested in the near future. Only a few studies have been published to date reporting data on the size distribution of food grade titanium dioxide. The aim of this study was to characterise the size distribution of titanium dioxide particles contained in eight confectionery products and the pristine titanium dioxide samples used in each of the products. This allowed the direct comparison of the particle size distribution in both the pristine and the extracted materials. By using various analytical techniques, such as transmission electron microscopy, single particle inductively coupled plasma mass spectrometry (sp-ICPMS) and centrifuge liquid sedimentation (CLS) for the characterisation and quantification of the titanium dioxide particle sizes, the impact of the instrumentation on the results was systematically studied. The volume-specific surface area (VSSA) and crystalline structure were also determined for all additives.

Nanoforms (NFs) of a substance may be distinguished from one another through differences in their physicochemical properties. When registering nanoforms of a substance for assessment under the EU REACH framework, five basic descriptors are required for their identification: composition, surface chemistry, size, specific surface area and shape. To make the risk assessment of similar NFs efficient, a number of grouping frameworks have been proposed, which often require assessment of similarity on individual physicochemical properties as part of the group justification. Similarity assessment requires an understanding of the achievable accuracy of the available methods. It must be demonstrated that measured differences between NFs are greater than the achievable accuracy of the method, to have confidence that the measured differences are indeed real. To estimate the achievable accuracy of a method, we assess the reproducibility of six analytical techniques routinely used to measure these five basic descriptors of nanoforms: inductively coupled plasma mass spectrometry (ICP-MS), Thermogravimetric analysis (TGA), Electrophoretic light scattering (ELS), Brunauer-Emmett-Teller (BET) specific surface area and transmission and scanning electron microscopy (TEM and SEM). Assessment was performed on representative test materials to evaluate the reproducibility of methods on single NFs of substances. The achievable accuracy was defined as the relative standard deviation of reproducibility (RSD

Microplastic pollution represents a global problem with negative impacts on aquatic environment and organisms' health. To date, most of the laboratory toxicological studies on microplastics (MPs) have made use of single commercial micro and nano-polymers, which do not reflect the heterogeneity of environmental MPs. To improve the relevance of the hazard assessment, micrometer-sized plastic particles of miscellaneous non-reusable waste plastics, with size

The measurement of physicochemical properties of polydisperse complex biological samples, for example, extracellular vesicles, is critical to assess their quality, for example, resulting from their production and isolation methods. The community is gradually becoming aware of the need to combine multiple orthogonal techniques to perform a robust characterization of complex biological samples. Three pillars of critical quality attribute characterization of EVs are sizing, concentration measurement and phenotyping. The repeatable measurement of vesicle concentration is one of the key‐challenges that requires further efforts, in order to obtain comparable results by using different techniques and assure reproducibility. In this study, the performance of measuring the concentration of particles in the size range of 50–300 nm with complementary techniques is thoroughly investigated in a step‐by step approach of incremental complexity. The six applied techniques include multi‐angle dynamic light scattering (MADLS), asymmetric flow field flow fractionation coupled with multi‐angle light scattering (AF4‐MALS), centrifugal liquid sedimentation (CLS), nanoparticle tracking analysis (NTA), tunable resistive pulse sensing (TRPS), and high‐sensitivity nano flow cytometry (nFCM). To achieve comparability, monomodal samples and complex polystyrene mixtures were used as particles of metrological interest, in order to check the suitability of each technique in the size and concentration range of interest, and to develop reliable post‐processing data protocols for the analysis. Subsequent complexity was introduced by testing liposomes as validation of the developed approaches with a known sample of physicochemical properties closer to EVs. Finally, the vesicles in EV containing plasma samples were analysed with all the tested techniques. The results presented here aim to shed some light into the requirements for the complex characterization of biological samples, as this is a critical need for quality assurance by the EV and regulatory community. Such efforts go with the view to contribute to both, set‐up reproducible and reliable characterization protocols, and comply with the Minimal Information for Studies of Extracellular Vesicles (MISEV) requirements.

Plastic particulates in the environment pose an increasing concern for regulatory bodies due to their potential risk to higher organisms (including humans) as they enter the food chain. Nanoplastics (defined here as smaller than 1 μm) are particularly challenging to detect and analyze at environmentally relevant concentrations and in biological matrices. The tunicate Ciona Robusta is an effective bioindicator for microplastics and nanoplastic contamination in the marine environment, due to its capacity to filter substantial volumes of water and to accumulate particulates. In this proof-of-principle study that demonstrates a complete methodology, following controlled exposure using spiked samples of a model nanoplastic (100 nm diameter polystyrene spheres) the nanoparticles were separated from an enzymatically digested biological matrix, purified and concentrated for analysis. The described method yields an approximate value for nanoplastic concentration in the organism (with a limit of detection of 106 particles/organism, corresponding to 1 ng/g) and provides the chemical composition by Raman spectroscopy. Furthermore, this method can be extended to other biological matrices and used to quantitatively monitor the accumulation of nanoplastics in the environment and food chain.

Neutralizing antibodies that target the receptor-binding domain (RBD) of the SARS-CoV-2 spike protein are among the most promising approaches against COVID-191,2. A bispecific IgG1-like molecule (CoV-X2) has been developed on the basis of C121 and C135, two antibodies derived from donors who had recovered from COVID-193. Here we show that CoV-X2 simultaneously binds two independent sites on the RBD and, unlike its parental antibodies, prevents detectable spike binding to the cellular receptor of the virus, angiotensin-converting enzyme 2 (ACE2). Furthermore, CoV-X2 neutralizes wild-type SARS-CoV-2 and its variants of concern, as well as escape mutants generated by the parental monoclonal antibodies. We also found that in a mouse model of SARS-CoV-2 infection with lung inflammation, CoV-X2 protects mice from disease and suppresses viral escape. Thus, the simultaneous targeting of non-overlapping RBD epitopes by IgG-like bispecific antibodies is feasible and effective, and combines the advantages of antibody cocktails with those of single-molecule approaches. The bispecific IgG1-like CoV-X2 prevents SARS-CoV-2 spike binding to ACE2, neutralizes SARS-CoV-2 and its variants of concern, protects against disease in a mouse model, whereas the parental monoclonal antibodies generate viral escape.

Micro- and nanoplastic (pMP and pNP, respectively) release is an emerging issue since these particles constitute a ubiquitous and growing pollutant, which not only threatens the environment but may have potential consequences for human health. In particular, there is concern about the release of secondary pMP and pNP from the degradation of plastic consumer products. The phenomenon is well-documented in relation to plastic waste in the environment but, more recently, reports of pMP generated even during the normal use of plastic food contact materials, such as water bottles, tea bags, and containers, have been published. So far, a validated and harmonized strategy to tackle the issue is not available. In this study, we demonstrate that plastic breakdown to pMP and pNP can occur during the normal use of polyethylene (PE) rice cooking bags and ice-cube bags as well as of nylon teabags. A multi-instrumental approach based on Raman microscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and particular attention on the importance of sample preparation were applied to evaluate the chemical nature of the released material and their morphology. In addition, a simple method based on Fourier transform infrared (FT-IR) spectroscopy is proposed for pNP mass quantification, resulting in the release of 1.13 ± 0.07 mg of nylon 6 from each teabag. However, temperature was shown to have a strong impact on the morphology and aggregation status of the released materials, posing to scientists and legislators a challenging question: are they micro- or nanoplastics or something else altogether?

The potential of analytical ultracentrifugation (AUC) in the analysis of the drug distribution of liposomal doxorubicin formulation (with nominal diameter of 85 nm) in the presence of human serum proteins is demonstrated using the absorbance detection function of the instrument. Based on the AUC measurement (and model fitting for molecular mass calculation), we show that in a single experiment, it is possible to measure the relative amounts of the free drug, of the liposome-encapsulated drug, and of the serum protein-bound drug. In addition, the same data provides both the accurate particle size distribution of the liposomal formulation in human serum and information on the protein that binds doxorubicin in the drug-protein fraction (in this case, human serum albumin). Thus, a single experiment (that requires only minimal sample preparation) provides several critical physical-chemical attributes of liposomal drug formulations. This innovative approach will greatly help in the development of improved methods for the challenging problem of characterizing nanomedicine in relevant biological matrices.

Asymmetric-flow field-flow fractionation (AF4) has been recognized as an invaluable tool for the characterisation of particle size, polydispersity, drug loading and stability of nanopharmaceuticals. However, the application of robust and high quality standard operating procedures (SOPs) is critical for accurate measurements, especially as these complex drug nanoformulations are most often inherently polydisperse. In this review we describe a unique international collaboration that lead to the development of a robust SOP for the measurement of physical-chemical properties of nanopharmaceuticals by multi-detector AF4 (MD-AF4) involving two state of the art infrastructures in the field of nanomedicine, the European Union Nanomedicine Characterization Laboratory (EUNCL) and the National Cancer Institute-Nanotechnology Characterisation Laboratory (NCI-NCL). We present examples of how MD-AF4 has been used for the analysis of key quality attributes, such as particle size, shape, drug loading and stability of complex nanomedicine formulations. The results highlight that MD-AF4 is a very versatile analytical technique to obtain critical information on a material particle size distribution, polydispersity and qualitative information on drug loading. The ability to conduct analysis in complex physiological matrices is an additional very important advantage of MD-AF4 over many other analytical techniques used in the field for stability studies. Overall, the joint NCI-NCL/EUNCL experience demonstrates the ability to implement a powerful and highly complex analytical technique such as MD-AF4 to the demanding quality standards set by the regulatory authorities for the pre-clinical safety characterization of nanomedicines.

The identification of nanomaterials for regulatory purposes in Europe requires a statistically significant comparison of the number metrics median diameter to the 100 nm criterion. Methods should be robust against minor imperfections of the implementation, transferable and reproducible between laboratories, and applicable to a wide range of diameters and material compositions. Sample preparation and metrics conversion are additional challenges that must be included in validation. Here we report on the validation of a protocol for analytical ultracentrifugation with fixed and ramped speed, specifically intended to serve the European Commission recommended definition, as relevant for REACH regulation, cosmetics and food labelling and national inventories. All the determined measurement uncertainties remain below 12% for volume and number metrics median diameters, in both laboratories. Traces of sub-100-nm particles with around 2% mass contribution (but > 50% number contribution) were reproducibly quantified. For powders, sample preparation is a critical step, and sonication intensities above 0.4 W/mL are recommended. The ramp operation can reduce user bias by eliminating the choice of options in data acquisition. The identification of nanomaterials and non-nano-materials by AUC in either fixed or ramp speed is consistent with TEM, excluding the platelet Kaolin material, but including the monodisperse silica, multimodal silica, a nanoform and a non-nano-form of BaSO 4 , irregularly shaped CaCO 3 and coated non-nano TiO 2 .

International audience; The use of nanotechnology in medical products has been demonstrated at laboratory scale, and many resulting nanomedicines are in the translational phase toward clinical applications, with global market trends indicating strong growth of the sector in the coming years. The translation of nanomedicines toward the clinic and subsequent commercialization may require the development of new or adaptation of existing standards to ensure the quality, safety and efficacy of such products. This work addresses some identified needs, and illustrates the shortcomings of currently used standardized methods when applied to medical-nanoparticles to assess particle size, drug loading, drug release and in vitro safety. Alternative physicochemical, and in vitro toxicology methods, with the potential to qualify as future standards supporting the evaluation of nanomedicine are provided.

Multi-functionalized nanoparticles are of great interest in biotechnology and biomedicine, especially for diagnostic and therapeutic purposes. However, at the moment the characterization of complex, multi-functional nanoparticles is still challenging and this hampers the development of advanced nanomaterials for biological applications. In this work, we have designed a model system consisting of gold nanoparticles functionalized with two differentially-terminated poly(ethylene oxide) ligands, providing both "stealth" properties and protein-binding capabilities to the nanoparticles. We use a combination of techniques (Centrifugal Liquid Sedimentation, Dynamic Light Scattering, Flow Field Flow Fractionation, Transmission Electron Microscopy, and Circular Dichroism) to: (i) monitor and quantify the ratios of ligand molecules per nanoparticle; (ii) determine the effect of coating density on non-specific protein adsorption; (iii) to assess the number and structure of the covalently-bound proteins. This article aims at comparing the complementary outcomes from typical and orthogonal techniques used in nanoparticle characterization by employing a versatile nanoparticle-ligands-biomolecule model system.

Biocompatible coating based on bovine serum albumin (BSA) was applied on two different TiO2 nanoparticles (aeroxide P25 and food grade E171) to investigate properties and stability of resulting TiO2@BSA composites, under the final perspective to create a “Safe-by-Design” coating, able to uniform, level off and mitigate surface chemistry related phenomena, as naturally occurring when nano-phases come in touch with proteins enriched biological fluids. The first step towards validating the proposed approach is a detailed characterization of surface chemistry with the quantification of amount and stability of BSA coating deposited on nanoparticles’ surfaces. At this purpose, we implemented an orthogonal multi-techniques characterization platform, providing important information on colloidal behavior, particle size distribution and BSA-coating structure of investigated TiO2 systems. Specifically, the proposed orthogonal approach enabled the quantitative determination of bound and free (not adsorbed) BSA, a key aspect for the design of intentionally BSA coated nano-structures, in nanomedicine and, overall, for the control of nano-surface reactivity. In fact, the BSA-coating strategy developed and the orthogonal characterisation performed can be extended to different designed nanomaterials in order to further investigate the protein-corona formation and promote the implementation of BSA engineered coating as a strategy to harmonize the surface reactivity and minimize the biological impact.

Nanomechanical monitoring of known mechanisms of membrane poration mediated by host defense peptides is reported. Quartz Crystal Microbalance with Dissipation monitoring used to probe the process of antimicrobial poration in model phospholipid bilayers offers a straightforward method for mechanically differential kinetic measurements of membrane-mediated antimicrobial effects in situ.

This study aims to provide guidelines to design and perform a robust and reliable physical-chemical characterization of liposome-based nanomaterials, and to support method development with a specific focus on their inflammation-inducing potential. Out of eight differently functionalized liposomes selected as &ldquo, case-studies&rdquo, three passed the physical-chemical characterization ( in terms of size-distribution, homogeneity and stability) and the screening for bacterial contamination (sterility and apyrogenicity). Although all three were non-cytotoxic when tested in vitro, they showed a different capacity to activate human blood cells. HSPC/CHOL-coated liposomes elicited the production of several inflammation-related cytokines, while DPPC/CHOL- or DSPC/CHOL-functionalized liposomes did not. This work underlines the need for accurate characterization at multiple levels and the use of reliable in vitro methods, in order to obtain a realistic assessment of liposome-induced human inflammatory response, as a fundamental requirement of nanosafety regulations.

The majority of active agents do not readily permeate into brain due to the presence of the blood-brain barrier and blood-cerebrospinal fluid barrier. Currently, the most innovative and promising non-invasive strategy in brain delivery is the design and preparation of nanocarriers, which can move through the brain endothelium. Niosomes can perform brain delivery, in fact polysorbates, can act as an anchor for apolipoprotein E from blood plasma. The particles mimic LDL and interact with the LDL receptor leading to the endothelial cells uptake. The efficacy of niosomes for anticancer therapeutic applications was correlated to their physicochemical and drug delivery properties. Dimensions and ζ-potential were characterized using dynamic light scattering and asymmetric flow-field fractionation system. Lipid bilayer was characterized measuring the fluidity, polarity and microviscosity by fluorescent probe spectra evaluation. Morphology and homogeneity were characterized using atomic force microscopy. Physicochemical stability and serum stability (45% v/v fetal bovine and human serum) were evaluated as a function of time using dynamic light scattering. U87-MG human glioblastoma cells were used to evaluate vesicle cytotoxicity and internalisation efficiency. From the obtained data, the systems appear useful to perform a prolonged (modified) release of biological active substances to the central nervous system.

Silver nanoparticles (AgNPs) may be synthesized by many different methods, with those based on the thermal reduction of silver salts by citric acid or citric acid/tannic acid being amongst the most commonly used. These methods, although widely used and technically simple, can produce particles in which the size, polydispersivity and morphology can vary greatly. In this work nearly mono-dispersed spherical AgNPs have been synthesized via a one-step reduction method by using sodium citrate and varying quantities of Tannic Acid (TA), which was thermally conditioned prior to use in the growth process. It was found that the final size can be further tailored by controlling the amount of TA and the thermal conditioning of the TA at 60 &deg, C at different time points, which changes the size and polydispersivity of AgNPs. To better understand the origin of this effect, optical spectroscopic analysis and 1H NMR of the TA following mild thermal conditioning of the solution have been done. Comparison of thermally conditioned TA and TA exposed to basic pH shows that similar chemical modifications occur and consequently produce similar effects on growth when used in the synthesis of AgNPs. It is proposed that thermal preconditioning of the TA introduces either chemical or structural changes, which decrease the final particle size under a given total silver content.

Biotechnological processes harnessing living organisms' metabolism are low-cost routes to nanostructured materials for applications in photonics, electronics, and nanomedicine. In the pursuit of photonic biohybrids, diatoms microalgae are attractive given the properties of the porous micro-to-nanoscale structures of the biosilica shells (frustules) they produce. The investigations have focused on in vivo incorporation of tailored molecular fluorophores into the frustules of Thalassiosira weissflogii diatoms, using a procedure that paves the way for easy biotechnological production of photonic nanostructures. The procedure ensures uniform staining of shells in the treated culture and permits the resulting biohybrid photonic nanostructures to be isolated with no damage to the dye and periodic biosilica network. Significantly, this approach ensures that light emission from the dye embedded in the isolated biohybrid silica is modulated by the silica's nanostructure, whereas no modulation of photoluminescence is observed upon grafting the fluorophore onto frustules by an in vitro approach based on surface chemistry. These results pave the way to the possibility of easy production of photonic nanostructures with tunable properties by simple feeding the diatoms algae with tailored photoactive molecules.

Graphical abstract, Analytical ultracentrifugation (AUC) is a powerful tool for the study of particle size distributions and interactions with high accuracy and resolution. In this work, we show how the analysis of sedimentation velocity data from the AUC can be used to characterize nanocarrier drug delivery systems used in nanomedicine. Nanocarrier size distribution and the ratio of free versus nanoparticle-encapsulated drug in a commercially available liposomal doxorubicin formulation are determined using interference and absorbance based AUC measurements and compared with results generated with conventional techniques. Additionally, the potential of AUC in measuring particle density and the detection of nanocarrier sub-populations is discussed as well. The unique capability of AUC in providing reliable data for size and composition in a single measurement and without complex sample preparation makes this characterization technique a promising tool both in nanomedicine product development and quality control.

We present here the surface-enhanced Raman spectroscopic (SERS)-based detection of the Wilm’s tumor gene (WT1) sequence using dye-labeled reporter oligonucleotide and magnetic core @ gold shell nanoparticles. Thiolated single-stranded DNA (ssDNA) complementers of the WT1 sequence were used to functionalize the gold shell with capture oligonucleotides in a facile and fast two-step method. The signal amplification performance of the core @ shell colloidal SERS substrate was tested using malachite green as label dye. The Raman signal enhancing efficacy of the magnetic core @ gold shell nanomaterial was compared with the efficacy of spherical gold particles produced using the conventional citrate reduction method. The core @ shell particles were found to be superior both regarding robustness in SERS and facile separation in a heterogeneous reaction system. The core @ shell particles functionalized with target specific oligonucleotide were able to capture the WT1 target and worked as Raman signal amplifiers in our assay system. The good physicochemical characteristics of these particles and the sensitivity observed in SERS experiments allow us to expect good performance in the further development steps of a novel, fast and reliable spectroscopic method for WT1 detection in minimal residual disease patients.

This work is dealing with the use of polystyrene (PS) nanoparticles as substrates for bioanalytical specific interactions. Different techniques were used for the accurate characterization of the PS nanoparticles of 100 nm and 196 nm before coating them with a layer of antibodies against immunoglobulins of type E (aIgE), giving to the particle a specific functionality. The formation of the aIgE adsorbed layer was monitored using centrifugal particle separation (CPS) and centrifugal field flow fractionation (CF3) experiments, which allowed to determine the size changes and the adsorbed mass. Particle sizes were also measured with DLS, used both as stand-alone instrument and coupled to CF3 (CF3-DLS). The complementary information obtained from the CPS and CF3-DLS measurements allowed the estimation of the density of the aIgE shell. The proteins immobilized at the surface fully retained their activity, as proven by the reactions between the functionalized PS-aIgE particles and immunoglobulins of type E (IgE) dispersed in suspensions prepared on purpose.

Paper-based SERS active substrates were prepared adsorbing spherical and star-shaped gold nanoparticles on a standard filter paper support. Besides the deposition conditions, morphological parameters of the particles were found to strongly affect the enhancer properties of the substrates. The developed substrate was tested regarding surface homogeneity as well as in the quantitative analysis of malachite green, - a well documented Raman reporter dye - and proved to be capable also to detect the oxidation products of apomorphine, a well-known drug molecule used in Parkinson's disease. This material is simple to prepare, easy to handle and dispose and as such it could be a perfect target for further development of a new family of mass-produced, cheap solid SERS substrates. © 2013 Elsevier B.V.

Two methods for protein patterning on antifouling surfaces have been applied to analyze the density and bioactivity of the proteins after deposition. Microcontact printing has been used as a technique to transfer fibronectin through conformal contact, while piezoelectric deposition has been employed as a non-contact technique for producing arrays of fibronectin (FN). Plasma deposited polyethylene oxide-like (PEO-like) films have been used as non-fouling background to achieve the bioadhesive/biorepellent surface contrast. Both patterning methods allow the direct fabrication of protein arrays on a non-fouling substrate, and the subsequent formation of a pattern of stem cells by cell attachment on the arrayed substrates. Microcontact printing produced fully packed homogeneous fibronectin patterns, much denser than microspotted patterns. Both printing and spotting technologies generated functional protein arrays, their bioactivity being primarily modulated by the density of the deposited protein layer. Optimization of the FN parameters used for deposition has lead to the achievement of high-quality microarrays with large population of neural stem cells immobilized in the patterns in serum-free conditions, where cells exhibit a more homogeneous starting population and factors influencing fate decisions can be more easily tracked. The immunorecognition of fibronectin targeted antibodies, as well as the cell density, increase with the protein density up to a saturation point. Over 100 ng/cm² of fibronectin on the surface leads to a decrease in the number of attached cells and a raise of cell spreading.

Gold nanorods are an important kind of nanoparticles characterized by peculiar plasmonic properties. Despite their widespread use in nanotechnology, the synthetic methods for the preparation of gold nanorods are still not fully optimized. In this paper we describe a new, highly efficient, two-step protocol based on the use of hydroquinone as a mild reducing agent. Our approach allows the preparation of nanorods with a good control of size and aspect ratio (AR) simply by varying the amount of hexadecyl trimethylammonium bromide (CTAB) and silver ions (Ag(+)) present in the "growth solution". By using this method, it is possible to markedly reduce the amount of CTAB, an expensive and cytotoxic reagent, necessary to obtain the elongated shape. Gold nanorods with an aspect ratio of about 3 can be obtained in the presence of just 50 mM of CTAB (versus 100 mM used in the standard protocol based on the use of ascorbic acid), while shorter gold nanorods are obtained using a concentration as low as 10 mM.

The detection of biomarkers by means of Surface Enhanced Raman Spectroscopy (SERS) is foreseen to became a very important tool in the clinical practice because of its excellent sensitivity and potential for the simultaneous detection of multiple biomarkers. In the present paper we describe how it was possible to build a sensor for the detection of genetic biomarkers involved in acute myeloid leukemia. The assay is based on the use of a specifically designed SERS substrate made of a 2D crystal structure of polymeric pillars embedded in a gold layer. This substrate is characterized by good enhancing properties coupled with an excellent homogeneity. The SERS substrate was conjugated with DNA probes complementary to a target sequence and used in a sandwich assay with gold nanoparticles labeled with a second DNA probe and a Raman reporter. The so developed assay allowed the detection of a leukemia biomarker (WT1 gene) and an housekeeping gene with low picomolar sensitivity. At last, we optimized the assay in order to tackle one of the main limitations of SERS based assay: the loss of signal that is observed when the Raman spectra are collected in liquid. Combining a preferential functionalization on the polymeric pillars with a different height of the polymer pillars from the gold layer the assay demonstrated its effectiveness even when measured in buffer.

In this article, we describe how it is possible to tune the size and the aspect ratio of gold nanorods obtained using a highly efficient protocol based on the use of hydroquinone as a reducing agent by varying the amounts of CTAB and silver ions present in the “seed-growth” solution. Our approach not only allows us to prepare nanorods with a four times increased Au3+ reduction yield, when compared with the commonly used protocol based on ascorbic acid, but also allows a remarkable reduction of 50–60 % of the amount of CTAB needed. In fact, according to our findings, the concentration of CTAB present in the seed-growth solution do not linearly influence the final aspect ratio of the obtained nanorods, and an optimal concentration range between 30 and 50 mM has been identified as the one that is able to generate particles with more elongated shapes. On the optimized protocol, the effect of the concentration of Ag+ ions in the seed-growth solution and the stability of the obtained particles has also been investigated.

Surface-enhanced Raman spectroscopy (SERS) widely improves the sensitivity of traditional Raman analysis, thus allowing this technique to be exploited for the development of new bio-analytical tests. In this work, 3D substrates made of zinc oxide tetrapods (ZnOTP) are decorated with branched gold nanoparticles by means of a new photochemical approach. The SERS enhancing properties of the obtained substrate are tested using different Raman dyes and apomorphine, a drug used for the management of Parkinson disease. The results prove that the enhancing properties depend on the shape of the gold nanoparticles grown on the branches of ZnO tetrapods. The optimized substrate here developed is characterized by an enhancing factor up to 7 x 10(6) and a detection limit for apomorphine of 1 mM. Finally, the new substrates are tested to study single cancer cells showing enhanced Raman signals related to the portion of the cell interacting with the 3D structure of the substrate.

We present chemical modification of self assembled monolayers (SAMs) using electron and ion-beam lithographies. We used thiolated polyethylene oxide (PEO) SAMs on gold to fabricate chemically contrasting patterns at the nanoscale. Patterned surfaces were characterized by X-ray photoelectron spectroscopy (XPS), time of flight-secondary ion mass spectrometry (ToF-SIMS). Results showed a chemical modification of surfaces patterned by means of electron beam (e-beam) lithography and a removal of PEO SAMs on the areas treated with the ion beam. The chemical modification of PEO SAMs converted the non-fouling surfaces on fouling surfaces.

Surface Enhanced Raman Spectroscopy is a powerful analytical technique that combines the excellent chemical specificity of Raman spectroscopy with the good sensitivity provided by the enhancement of the signal observed when a molecule is located on (or very close to) the surface of suitable nanostructured metallic materials. The availability of cheap, reliable and easy to use SERS substrates would pave the road to the development of bioanalytical tests that can be used in clinical practice. SERS, in fact, is expected to provide not only higher sensitivity and specificity, but also the simultaneous and markedly improved detection of several targets at the same time with higher speed compared to the conventional analytical methods. Here, we present the SERS activity of 2-D plasmonic crystals made by polymeric pillars embedded in a gold matrix obtained through the combination of soft-lithography and plasma deposition techniques on a transparent substrates. The use of a transparent support material allowed us to perform SERS detection from support side opening the possibility to use these substrates in combination with microfluidic devices. In order to demonstrate the potentialities for bioanalytical applications, we used our SERS active gold surface to detect the oxidation product of apomorphine, a well-known drug molecule used in Parkinson’s disease which has been demonstrated being difficult to study by traditional HPLC based approaches.

Sensitivity of neural stem cells viability, proliferation and differentiation upon exposure to methylmercury chloride (MeHgCl) was investigated on different types of biofunctional surfaces. Patterns of biodomains created by microprinting/microspotting of poly-L-lysine or extracellular matrix proteins (fibronectin and vitronectin) allowed for non-specific electrostatic or specific, receptor mediated interactions, respectively, between stem cells and the surface. The neural stem cell line HUCB-NSC has been previously shown to be susceptible to MeHgCl in developmentally dependent manner. Here we demonstrated that developmental sensitivity of HUCB-NSC to MeHgCl depends upon the type of adhesive biomolecules and the geometry of biodomains. Proliferation of HUCB-NSC was diminished in time and MeHgCl concentration dependent manner. In addition, the response to MeHgCl was found to be cell-type dependent. Undifferentiated cells were the most sensitive independently of the type of bioactive domain. Significant decrease of GFAP+ cells was detected among cells growing on poly-L-lysine, while on fibronectin and vitronectin, this effect was observed only in the highest (1 lM) concentration of MeHgCl. b-Tubulin III expressing cells were most sensitive on fibronectin domains. In addition, limited bioactive domains to lm in size, as compared to non-patterned larger area of the same adhesive substrate, exerted protective role. Thus, the surface area and type of cell/biofunctional surface interaction exerted significant influence on developmental stage and cell-type specific response of HUCB-NSC to MeHgCl., JRC.I.4-Nanobiosciences

We report here in vitro evaluation of cellular nanoparticle uptake, cytotoxic effect and autophagy as possible survival strategy in lung epithelial cells (A549). The effects of surface charge and presence of serum proteins, as well as the influence of various inhibitors on the uptake of 20 nm monodispersed silica nanoparticles are discussed. Uptake rate of the particles with various functional groups is demonstrated to be similar in the presence of serum proteins, while the uptake rate ranking results in COOH > NH2 > OH under serum free conditions. The uptake process is shown to be actin dependent, and can be partially inhibited by dynasore in the presence of serum proteins. These results suggest a macropinocytotic uptake process that was also confirmed by scanning electron microscopy. In spite of the intensive active uptake, significant cytotoxic effect is detected only at relatively high (above 250 μg/mL) concentrations, while blebbing of the cell surface is observed at already 5 hours of exposure time. By monodansylacadaverin staining and RT-PCR experiments, we show that this blebbing is related to autophagy rather than apoptotic cell death. After the exposure to silica nanoparticles, stress-related and cell-death-related genes are found to be upregulated, but no activation of the apoptotic process was observed. The A549 cells display elevated levels of autophagosomes, however cells do not show typical apoptosis markers such as increased amount of active caspase-3 and release of mitochondrial cytochrome C. Based on these results, we propose here autophagic activity and cross-talk between autophagic and apoptotic pathways as a mechanism that allows the survival of A549 cells under exposure to silica nanoparticles., JRC.I.4-Nanobiosciences

Gold nanoparticles (AuNPs) can interfere with some of the biochemical processes of macrophage cells but the mechanisms of action of these potentially medically-relevant effects are still unclear. Here we study the fate of AuNPs interacting with cells derived from the innate immune system. To visualize AuNPs with nanometer resolution without losing sight of the whole morphology of cells we developed a convenient approach that uses electron and ion microscopy techniques. The inspection using an ion beam to selectively cut where the AuNPs were found, allows for determining their intracellular localizations. We studied the cellular uptake of AuNPs, with or without exposure of the cells to Latrunculin-A, a phagocytosis inhibitor. Results indicate a size dependence of the internalization mechanisms for THP-1 cells. The internalization of larger AuNPs was blocked in the presence of Latrunculin-A, although they could attach to the membrane. Smaller AuNPs though were not blocked by actin depending processes.

Surface Enhanced Raman Spectroscopy (SERS) is a popular method in bio-analytical chemistry and a potentially powerful enabling technology for in vitro diagnostics. SERS combines the excellent chemical specificity of Raman spectroscopy with the good sensitivity provided by enhancement of the signal that is observed when a molecule is located on (or very close to) the surface of nanostructured metallic materials. Star-like gold nanoparticles (SGN) are a new class of multibranched nanoparticles that in the last few years have attracted the attention of SERS community for their plasmonic properties. In this work we present a new method to prepare star-like gold nanoparticles with a simple one step protocol at room temperature using hydroquinone as reducing agent. Besides we compare the enhancement of Raman signal of malachite green, a dye commonly employed as label in biological studies, by star-like gold nanoparticles having different size, directly in liquid. This study shows that SGN provide good enhancement of Raman signal and that the effect of their dimension is strongly dependent on the wavelength used. Moreover preliminary results suggest that SGN produced using this method are characterized by good physical-chemical properties and they can be functionalized using the standard thiol chemistry. Overall, these results suggest that star-like gold nanoparticles produced through this method could be used for the further development of highly specific and sensitive SERS-based bio-analytical tests. © 2013 Copyright SPIE.

Using stem cells (SC) in new strategies for clinical treatment requires control of stem cell fate decision and the ability to govern their patterning and commitment in tissue engineering. Neural stem cells and other adult SC can respond to the different components of the microenvironment and their spatial arrangement in the stem cell niche. It has been shown previously by our group that different composition and architecture of patterned bioactive domains influence the developmental response of neural stem cells. In the present report we verify the commitment and differentiation of neural stem cells derived from human cord blood (HUCB-NSC) by a single cell patterning system. Microcontact printing technology was used to generate single cell positioning areas of different geometry: 10 micrometer-thin lines and 10 micrometer-width one cell posts. The commitment and differentiation of HUCB-NSC cells cultured on different surfaces were dependent on the geometry and the type of biomaterial present in bioactive domains. Fibronectin promoted neuronal protrusion outgrowth (Beta-tubulin III and MAP-2 positive cells) and gap junction development (Cx43 marker) between cells growing on lines while poly-L-lysine promoted HUCB-NSC differentiation into astrocytic, glial fibrillary acidic protein expressing (GFAP positive) cell phenotype. Here we also demonstrate by scanning electron microscopy that morphology of cells on the patterned surface is highly dependent upon the type of biomolecules used for printing. These kinds of platforms can be used for investigating the influence of spatial organization of environment on the SC fate decision and for studying the molecular processes occurring in a single cell.

An in vitro human alveolar barrier established by the coculture of epithelial human cell line NCI-H441 with endothelial human cell line ISO-HAS-1 was used to evaluate the effects of silicon dioxide nanoparticles (SiNPs) exposure, in the presence or absence of macrophage-like cells THP-1. The measurements of different parameters indicated that macrophages (THP-1 cell line) can play an important role in the mechanisms of alveolar barrier damage induced by the exposure to SiNPs. It was observed a high release of TNF-α and IL-8 that could subsequently lead to down regulation of surfactant proteins A mRNA expression. The oxidative stress also contributed to the mechanism of toxicity induced by SiNPs as high reactive oxygen species production was observed. The results suggested that in vitro approach can be used to study pulmonary toxicity as long as the applied in vitro model mimics closely the complexity of vivo situation., JRC.I.2-Public Health Policy Support

Physical interactions of cells with the adhesive substrates of the microenvironment as well as the presence of the soluble growth factors are important for the proliferation capacity of neural stem cells. We have used biofunctionalized surface domains microcontact printed with either synthetic polyaminoacid poly-L-lysine or extracellular matrix (ECM) component such as fibronectin, to study the proliferation capacity of human umbilical cord blood-derived neural stem cells (HUCB-NSC). The proliferation measured by the expression of Ki-67 protein was accompanied by the investigation of the cell morphology under the transmission and scanning electron microscopy in different culture time, plating densities of cells and medium condition (serum-free or 2 percent of FBS). The poly-L-lysine domains of defined micro-scale area promoted the presence of round, loosely attached Ki-67-positive cells, while fibronectin domains of the same size allowed appearance of flattened, strongly attached cells with more differentiated phenotype. These results were in agreement with the non-specific, electrostatic type of interaction between cell and substrate on poly-L-lysine and integrin receptor-mediated specific adhesion on fibronectin. In this report we have described in vitro culture conditions, which allow for immobilization of the non-differentiated and highly proliferating population of neural stem/progenitor cells to the biofunctionalized surface. The microarrays with bioactive domains allocating non-differentiated and proliferating neural stem/progenitor cells may find application for drug and chemicals toxicology screening of diverse factors influencing neural development.