Search

PURPOSE: The aim of this ex vivo study was to assess the ability to remove oral biofilm by different combinations of mechanical and chemical treatments on smooth and rough titanium surfaces, as well as their impact on osteoconduction. MATERIALS AND METHODS: Forty-eight sandblasted acid-etched (SLA) and 48 machined titanium disks were contaminated with oral bacterial biofilm and exposed to the following treatments: (1) titanium brush (TB), (2) TB + 40% citric acid (CA), (3) TB + 5.25% sodium hypochlorite (NaOCl), (4) air polishing with glycine powder (AP), (5) AP + 40% CA, and (6) AP + 5.25% NaOCl. Residual bacteria and chemical contamination were assessed using viable bacterial count assay, scanning electron microscopy (SEM), and x-ray spectroscopy (XPS). Human primary osteoblast (hOB) adhesion and osteocalcin (OC) release were also evaluated. RESULTS: The microbiologic, SEM, and XPS analysis indicate a higher biofilm removal efficiency of combined mechanical-chemical treatments compared with exclusively mechanical approaches, especially on SLA surfaces. SEM analysis revealed significant alterations of surface microtopography on the disks treated with TB, while no changes were observed after AP treatment. OC release by hOBs was mainly decreased on disks treated with CA and NaOCl. CONCLUSION: The combination of mechanical and chemical treatments provides effective oral biofilm removal on both SLA and machined implant surfaces. NaOCl and CA may have a negative effect on osteoblasts cultured on SLA samples.

Psoriatic arthritis (PsA) is an inflammatory chronic arthritis associated with psoriasis. Currently, data about gender differences in clinical manifestation and therapeutic outcomes of PsA are limited. Frequently, women manifest a peripheral disease while men have an axial localization. Moreover, women display higher disease activity and physical activity limitations, if compared to men. Although the involvement of the temporomandibular joint (TMJ) is quite rare, it can seriously impact the quality of life. The morpho-functional peculiarities of TMJ require a multidisciplinary approach to perform a correct diagnosis and a successful treatment. Here, we report a case of a woman affected by PsA involving TMJ treated by combining pharmacological therapy and an occlusal splint. The coordination between different specialties led to a complete remission of clinical symptoms and a regression of lesions.

Leukocyte- and platelet-rich fibrin (L-PRF) is an autologous platelet concentrate rich in growth factors and plasma proteins, obtained by centrifugation of patient whole blood, and widely used in oral surgery. This report describes a case of alveolar ridge preservation with L-PRF membranes. Postextractive alveolar healing was then assessed through a histologic and histomorphometric analysis. A patient requiring tooth extraction and subsequent implant rehabilitation was treated with simple extraction and socket filling with L-PRF membranes. Implant placement was performed at 3 months, and a bone biopsy was obtained for histomorphometric analysis. Histological examination of the grafted sites showed that the use of L-PRF could achieve good results in terms of bone dimension and quality and soft tissue healing. The results of this study support the use of L-PRF membranes to preserve hard and soft tissues after tooth extraction.

This preliminary study aims to evaluate the efficacy of an autologous dentin graft in preventing periodontal defects after impacted or semi-impacted lower third molars’ (M3) surgical extraction. For this purpose, radiographic and periodontal evaluation of post-extractive sockets were performed. Ten patients were enrolled in the study: twenty M3 extraction sockets were treated with a split-mouth modality. After tooth extraction, the experimental sites were filled with autologous dentin graft obtained by the extracted M3, while the control sites were filled with blood clot alone. Flaps were closed by first intention to ensure the stability of the wounds. Post-extractive sites were monitored at days 15, 90 and 180. The healing was not affected by any complications associated with the use of the autologous dentine graft in all cases. The measurements recorded at six months showed a reduction of the probing pocket depth distal to the second lower molar (M2) at both surgical sites, with a greater reduction observed at the experimental sites. Radiographic evaluation also showed a greater amount of bone gain at the grafted sites compared to the control sites. The results of this preliminary study suggest that autologous dentin grafts can be useful in preventing the formation of periodontal defects distal to M2 after M3 surgical extraction.

The thorough knowledge of the anatomy of mandibular premolars is an essential factor for a correct approach to endodontic treatment, concerning both non-surgical and surgical treatment.Since there is no data on the Italian population in this context, the aim of this study was to evaluate, from a surgical perspective, the anatomy of mandibular premolars among the Italian population through a cone-beam computed tomography (CBCT) analysis, considering the morphology of their root canals according to Vertucci's classification and the prospect of their apices with regard to the vestibular bone plate and the proximity to the inferior alveolar nerve and the mental foramen as well as to evaluate the most appropriate distance from the apex in the radicular resection (3 mm or 5 mm).At total of 492 CBCT acquisitions (from 246 males and 246 females) were included retrospectively, evaluating 720 mandibular premolars. Age, gender, the tooth position in relation to the vestibular plate, the number of roots, the tooth length and the root length, the number of canals, the configuration of the root canal system according to Vertucci's criteria, C-shaped canals, the distance from the cementoenamel junction (CEJ) to the canal bifurcation, the number of apical foramina, and the distance from the apex to the inferior alveolar nerve or the mental foramen were evaluated.The study highlighted the frequent anatomic variability of the root canal system. It found the presence of 1 root for first and second premolars in 97% and 99% of cases, of 2 roots in 2.7% and 0.7% of cases, and of 3 roots in 0.3% and 0.3% cases, respectively. In 92% of cases, the mental foramen was located below a second premolar, or between a first premolar and a second premolar; only in 8% of cases, it was located close to a first premolar, but never as close as to a second premolar.Mandibular premolars show a truly surprising anatomical variability, especially for mandibular first premolars, which therefore requires adequate radiographic planning before providing any endodontic treatment, or especially endodontic retreatment or endodontic surgery. Taking into account proximity to the inferior alveolar nerve and the mental foramen, any surgical approach must be carefully planned. Frequently, a two-dimensional (2D) radiographic examination is not sufficient to fully understand the anatomical variability of these teeth.

Aim The aim of this study was to analyze, by the aid of microbiological analysis and the field emission scanning electron microscopical (FE-SEM) analysis, the role of high-density polytetrafluoroethylene (d-PTFE) membranes in avoiding the microbial colonization of a nanocrystalline hydroxyapatite (nc-HA) bone graft and the involvement of this colonization in the healing process. Materials and methods Six patients underwent extraction of unrecoverable teeth, and a socket preservation technique was carried out with nc-HA synthetic bone graft and then covered with a d-PTFE membrane. After 28 days from surgery, FE-SEM analysis and BioTimer assay technique to assess the microbiological count of streptococci species were carried out. Data were collected and analyzed by the Student's t test (confidence interval: 95%). Results The mean amount of bacteria measured on the upper side of the membrane was 6.52 ± 0.50 CFU, while on the lower side, it was 6.59 ± 0.40 CFU. Significant differences were not found between the two sides of the membrane or between the different sectors (p > 0.05). The FE-SEM analysis revealed structured biofilms on both sides of the membrane: species of cocci, bacilli, and fusobacteria were recognizable in occasional settled vegetations. Conclusion Since the amount of bacteria found was low, the improved impermeability of the d-PTFE membrane permitted the healing process to proceed uneventful and without signs of infection or inflammation. Clinical relevance The infection of the graft site could lead to a failure of the socket preservation technique which could delay or compromise the rehabilitation following procedures. The use of d-PTFE can improve the bone regeneration thanks to its antimicrobial properties.

The COVID-19 pandemic has had a deep impact on university education, necessitating an abrupt shift from face-to-face learning to distance learning (DL). This has created new challenges, especially for those courses in which practical activities and internships are integral parts of the education program. The aim of this study was to assess the impact of DL on the study progress of a population of pregraduate students of medicine, dentistry, and healthcare professions. The survey was administered through an anonymous questionnaire by sharing a Google Forms link. Demographic data and educational background information were collected to obtain a profile of the participants. Different aspects of DL were investigated, including availability of digital devices, quality of connection, and environmental conditions; other questions focused on the effects of DL on students’ progress and professional maturation. Measures of association were also calculated using the chi-squared test, Cramer V, and Somers D. Among the 372 who participated, the results showed that students had a positive attitude toward online classroom and that DL did not substantially affect their progress. Most of the associations were statistically significant, also highlighting the effect of the degree course on the responses. Some critical issues clearly emerged, however, including the lack of adequate devices and environmental conditions due to economic disparity, poor relationships, suspension of internship programs, and clinical training. The results suggest that DL cannot be considered as a substitute for classroom-based medical education outside an emergency context.

Background. The aim of this study was to compare retrospectively the effect of three different treatment protocols on the healing outcome in patients with established medication-related osteonecrosis of the jaw (MRONJ). Methods. A total of 34 MRONJ patients were recruited from the Department database and were divided according to the treatment protocols in a study group (G1) and two control groups (G2 and G3). G1 was treated with antibiotic therapy, surgery, leukocyte- and platelet-rich fibrin (L-PRF), and photobiomodulation, G2 was treated with antibiotic therapy and surgery, G3 was treated with antibiotic therapy and photobiomodulation. Various clinical variables and treatment protocols were analyzed to determine their correlation with the healing outcome at three and six months of follow-up. Results. There was a significant association between the different treatment protocols and the outcomes at both three and six months follow-up (p = 0.001 and p = 0.002, respectively). No significant association was observed between the outcomes and MRONJ localization, MRONJ stage, duration of drug treatment, gender, diabetes, corticosteroid therapy, smoking habits, underlying disease, and history of chemotherapy at both three and six months follow-up. Conclusions. Our results show that the combination of antibiotic therapy, surgery, L-PRF, and photobiomodulation may effectively contribute to MRONJ management.

Liquid fibrinogen is an injectable platelet concentrate rich in platelets, leukocytes, and fibrinogen obtained by blood centrifugation. The aim of this study was to analyze the release of different growth factors in the liquid fibrinogen at different times and to assess possible correlations between growth factors and cell counts. The concentration of transforming growth factor beta 1 (TGF-&beta, 1), platelet-derived growth factor-AB (PDGF-AB), platelet-derived growth factor-BB (PDGF-BB), bone morphogenetic protein 2 (BMP-2), fibroblast growth factor 2 (FGF-2) and vascular endothelial growth factor (VEGF) released by liquid fibrinogen were examined with ELISA at three time points (T0, time of collection, T7, 7 days, T14, 14 days). The cellular content of the liquid fibrinogen and whole blood was also calculated for each volunteer. A mean accumulation of platelets of almost 1.5-fold in liquid fibrinogen compared to whole blood samples was found. An increase of TGF-&beta, 1, PDGF-AB, FGF-2, and VEGF levels was detected at T7. At T14, the level of TGF-&beta, 1 returned to T0 level, PDGF-AB amount remained high, the levels of FGF-2 and VEGF decreased with respect to T7, but remained higher than the T0 levels, PDGF-BB was high at all time points, BMP-2 level was low and remained constant at all time points. TGF-&beta, 1, PDGF-AB, and PDGF-BB showed a correlation with platelet amount, whereas BMP-2, FGF-2, and VEGF showed a mild correlation with platelet amount. Due to the high concentration of platelets, liquid fibrinogen does contain important growth factors for the regeneration of both soft and hard tissue. The centrifugation protocol tested in this study provides a valid solution to stimulate wound healing in oral and periodontal surgery.

The surgical treatment of peri-implantitis is currently based on the removal of biofilms from the implant surface by primary means of mechanical and physical treatments. However, such approaches often determine some alterations of the implant surface with detrimental effects on re-osseointegration. This study aims to evaluate the effects of four different mechanical and physical treatments on titanium samples with moderately rough surface. Air powder abrasion (AP) with glycine powder, a titanium brush (TB) and a diode laser at 3 W (L3) and 4 W (L4) were tested. Surface morphology, roughness and chemical composition were then assessed by scanning electron microscope (SEM), white light interferometer and X-ray photoelectron spectroscopy (XPS), respectively. The microscopic analysis revealed significant alterations in surface morphology on TB samples, while AP and L3 had only a minor or null impact. L4 samples revealed signs of overheating due to the excessive power. Nevertheless, the overall roughness of the samples was not significantly altered in terms of roughness parameters. Similarly, surface chemical composition was not significantly affected by the treatments. Among the treatments tested in this study, air powder abrasion with glycine powder and 3 W diode laser had the lowest impact on surface physicochemical properties.

(1) Background: BioHPP® (Bredent, UK) is a partially crystalline poly ether ether ketone (PEEK) that is strengthened using ceramic. PEEK and its various formulations represent a very interesting alternative, and has been in-depth with its literature in recent years; (2) Methods: A PubMed and Scopus search for the term “BioHPP” yielded 73 results and 42 articles which were included in this short review. Considering the scarce literature on the subject, each article was considered in this review; (3) Results: the articles analyzed are very recent, all published in the last 5 years. Their clinical evaluation of BioHPP® highlights many positive aspects, and few articles have highlighted critical issues in its multiple clinical applications; (4) Conclusions: this material is not only extremely interesting for the future, but possesses characteristics suitable for clinical application today, for endocrowns, small adhesive bridges, temporary prostheses and for immediate loads on implant restorations. The excellent aesthetics and the possibility of simple reprocessing of the restorations made with this material invite its clinical application.

Objective. Platelet-rich fibrin (PRF) clots and membranes are autologous blood concentrates widely used in oral surgical procedures; less is known, however, about the liquid formulations of such products. The aim of this in vitro study is to assess the behavior of different implant surfaces when in contact with two liquid leucocyte- and platelet-rich fibrin (L-PRF) products.Methods. Six commercial pure titanium discs, of 9.5 mm diameter and 1.5 mm thickness, were used. Three of these samples had a micro/nano-rough surface; three were machined. Three different protocols were tested. Protocols involved the immersion of the samples in(1)a platelets, lymphocytes, and fibrinogen liquid concentrate (PLyF) for 10 minutes,(2)an exudate obtained from L-PRF clots rich in fibronectin and vitronectin for 5 minutes, and(3)the fibronectin/vitronectin exudate for 2 minutes followed by immersion in the PLyF concentrate for further 8 minutes. After these treatments, the samples were fixed and observed using a scanning electron microscope (SEM).Results. Under microscopic observation,(1)the samples treated with the PLyF concentrate revealed a dense fibrin network in direct contact with the implant surface and a significant number of formed elements of blood;(2)in the samples treated with the fibronectin/vitronectin exudates, only a small number of white and red blood cells were detectable; and(3)in samples exposed to the combined treatment, there was an apparent increase in the thickness of the fibrin layer. When compared to the machined surface, the micro/nano-rough samples showed an overall increased retention of fibrin, leading to a thicker coating.Conclusions. Liquid L-PRF products promote the formation of a dense fibrin clot on micro/nano-rough implant surfaces in vitro. The adjunctive treatment of surfaces with the fibronectin/vitronectin exudate could provide support to contact of the fibrin with the surface, though it is not essential for the clot formation. Further studies are necessary to better elucidate the properties and benefits of liquid L-PRF products.

Surgical extraction of the third molar can often result in the development of a periodontal pocket distal to the second molar that could delay the healing, and the socket could be colonized by bacteria and lead to secondary abscesses, or it may cause mobility or hypersensitivity. The aim of this case report is to assess the efficacy of a dentin autograft in the prevention of periodontal dehiscences after the surgical extraction of the third molar, obtained by the immediate grinding of the extracted tooth. A healthy 18-year-old male patient underwent surgery of both impacted mandibular molars: right postextractive socket was filled with grinded dentin; then, the left one was filled with fibrin sponge. The patient was followed up for six months, and clinical and radiographic assessment were performed: measurements of plaque index (PI), bleeding on probing (BOP), gingival index (GI), clinical attachment level (CAL), and probing pocket depth (PPD) were done before surgery and repeated at 90 and 180 days after the extractions. Measurements made at six months after the surgery revealed that the grafted site was characterized by a minor depth of the pocket if compared with the nongrafted site, with no clinical/radiographic signs of complications.

The aim of this study was to compare a transposed with a repositioned flap by assessing the periodontal effects on the second molar and primary healing after extraction of partially impacted lower third molars. A total of 24 patients requiring partially impacted mandibular wisdom tooth removal were enrolled in the study. The test group (n = 12) underwent a transposed flap procedure, whereas the control group (n = 12) underwent a repositioned flap procedure. Plaque index, probing depth, bleeding on probing, and width of keratinized tissue were recorded the day of surgery (T1) and after 60 days (T4). Wound dehiscence was assessed on the mesio-distal and bucco-lingual directions at days 2 (T2), 7 (T3), and T4. No significant differences have been observed in the periodontal parameters between the groups at T1 and T4 (P > 0.05). Similarly, no difference was found at T2, T3, and T4 in wound dehiscence incidence (P > 0.05). To date, no data exists on the use of transposed flaps in third molar surgery; thus a comparison of results cannot be done. Further studies with larger population are needed to investigate the potential advantages of this type of flap.

Piezoelectric devices are widely used in oral surgical procedures, including implant site preparation. However, little is known about the influence of working movement on temperature elevation in bone. The aim of this study was to assess the effects of two different working cycles on temperature elevation during piezoelectric implant site preparation. Sixty osteotomies at a depth of 10 mm were performed on bone blocks of bovine ribs using a piezoelectric tip with external irrigation (IM1s, Mectron Medical Technology, Carasco, Italy). A mechanical positioning device was used to guarantee reproducible working and measuring conditions. Two different working cycles, of 4 and 6 s, respectively, were tested, including both longitudinal and rotational movements. Temperature was recorded in real time with a fiber optic thermometer and applied pressure was maintained under 150 g. For each test, the highest recorded temperature (Tmax) and the mean temperature recorded from 30 s before to 30 s after the highest recorded temperature (T&plusmn, 30) were extrapolated. Tests duration was also recorded. Both Tmax and T&plusmn, 30 were significantly higher in the &lsquo, 6 s cycles&rsquo, group than the &lsquo, 4 s cycles&rsquo, group (42.44 &plusmn, 7.3 &deg, C vs. 37.24 &plusmn, 4.6 &deg, C, p = 0.002, 37.24 &plusmn, C vs. 33.30 &plusmn, 3.3 &deg, C, p = 0.003). Test duration was also significantly higher using 6 s cycles compared to 4 s cycles (143.17 &plusmn, 29.4 s vs. 119.80 &plusmn, 36.4 s, p = 0.002). The results of this study indicate that working cycles of 4 s effectively reduce heat generation and working time during piezoelectric implant site preparation.

Several antiseptic agents have been proposed for the treatment of peri-implantitis as a complementary therapeutic strategy in addition to mechanical devices. The aim of this study was to compare six different antiseptics, as well as alternative formulations of the same chemical agent, with respect to their decontamination efficacy and impact on chemical properties of the implant surface. Titanium disks with a micro-rough surface, previously contaminated with Porphyromonas gingivalis and Streptococcus mutans biofilms, were treated for 2 min with different antiseptics (liquid sodium hypochlorite 5.25%, gel sodium hypochlorite 5.25%, liquid chlorhexidine 0.2%, gel chlorhexidine 1%, gel citric acid 40%, and gel orthophosphoric acid 37%) or sterile saline solution (control) and their antibacterial activity as well as their ability to remove biofilm were assessed by viable bacterial count and scanning electron microscopy, respectively. Spectroscopic analysis was also performed on non-contaminated disks after exposure to the antiseptics, in order to detect any change in the elemental composition of the titanium surface. All the antimicrobial formulations examined were effective against P. gingivalis and S. mutans biofilms. SEM analysis revealed however that liquid sodium hypochlorite 5.25% was more effective in dissolving biofilm residues. Spectroscopic analysis detected traces of the antiseptics, probably due to insufficient rinsing of the titanium surfaces. In conclusion, since gel formulations of these antiseptic agents possessed a similar antibacterial activity to the liquid formulations, these may be proposed as alternative treatments given their properties to avoid overflows and increase contact time without significant side effects on the bone.

Background The displacement of a third molar is a rare occurrence, but it could lead to serious and/or life threatening complication. Aim of this review is to understand the most correlated causes of displacement and the possible solutions proposed in literature to avoid and solve this complication for maxillary and mandibular third molars at the appropriate time. Material and methods A search for "third molar displacement" was performed by using Pubmed database. Articles referred to soft tissues displacement, from 1957 to 2018, were included in the review. The references lists of all eligible articles were examined and additional studies were added to the review only if indexed on Pubmed. All the articles on maxillary sinus displacement and the dislocation of dental fragments or surgical equipment were excluded. Results From a total of 134 results, 68 articles were examined for satisfying inclusion criteria. 18 articles were excluded because not inherent with the topic; 19 articles on infratemporal space, 11 on sublingual space, 9 on submandibular space, 11 on lateral pharyngeal space displacement were considered congruent for the review and included. Conclusions The displacement of the third molar in deeper tissues could be avoided by the use of proper surgical procedures and instrumentarium. If displacement occurs, and the operator could not reach the tooth in safe conditions, the patient should be immediately referred to a maxillo-facial surgeon, because of the possibility of further displacement or the onset of hazardous or potentially fatal infections in vital regions. Key words:Third molar, wisdom tooth, maxillary, mandibular, displacement.

Alveolar ridge preservation has become a very common procedure following tooth extraction. This study presents a clinical, histologic, and histomorphometric analysis of postextraction bone changes using nanocrystalline hydroxyapatite (nc-HA) and exposed high-density polytetrafluoroethylene (d-PTFE) membrane. A total of 10 extraction sockets were treated. Clinical measurements were taken after tooth extraction with a customized acrylic stent to ensure the same measurement points. At 6 months, clinical measurements were repeated and bone specimens taken. An overall bone reduction was observed. The histologic and histomorphometric analysis revealed newly formed bone (25.92% ± 18.78%), soft tissue (28.55% ± 9.73%), and residual graft particles (15.43% ± 11.08%). Further studies are necessary to evaluate the efficacy of this technique over the long term.

Purpose. Various parameters can influence temperature rise and detection during implant site preparation. The aim of this study is to investigate local temperature values in cortical and corticocancellous bovine bone during early stages of piezoelectric implant site preparation.Materials and Methods. 20 osteotomies were performed using a diamond tip (IM1s, Mectron Medical Technology, Carasco, Italy) on two different types of bovine bone samples, cortical and corticocancellous, respectively. A standardized protocol was designed to provide constant working conditions. Temperatures were measured in real time at a fixed position by a fiber optic thermometer.Results. Significantly higher drilling time (154.90 sec versus 99.00 sec;p<0.0001) and temperatures (39.26°C versus 34.73°C;p=0.043) were observed in the cortical group compared to the corticocancellous group. A remarkable variability of results characterized the corticocancellous blocks as compared to the blocks of pure cortical bone.Conclusion. Bone samples can influence heat generation duringin vitroimplant site preparation. When compared to cortical bone, corticocancellous samples present more variability in temperature values. Even controlling most experimental factors, the impact of bone samples still remains one of the main causes of temperature variability.

This study aimed to evaluate the efficacy of an exposed high-density polytetrafluoroethylene (d-PTFE) membrane in preventing epithelial migration in postextraction sockets. For this purpose, a histologic description of the newly formed soft tissue underlying the membrane is presented. The periodontal status of the adjacent teeth was also evaluated to assess the gingival response. Ten premolar extraction sockets were treated. After tooth extraction, the sockets were filled with nanocrystalline hydroxyapatite and covered with d-PTFE membranes. Subperiosteal pockets were created to ensure the stability of the membranes. Membranes were left intentionally exposed and were atraumatically removed after 28 days. At that time, a bioptic specimen of the newly formed soft tissue under the membranes was taken. All the histologic samples showed a dense connective tissue without epithelial cells and no signs of foreign body reaction. No significant variation of the periodontal indices was observed on the teeth adjacent to the extraction sites. The study results indicate that exposed d-PTFE membranes can prevent epithelial migration in healing sockets without consequences on the periodontal health.

Overheating during implant site preparation negatively affects the osseointegration process as well the final outcome of implant rehabilitations. Piezoelectric techniques seem to provide to a gentle implant preparation although few scientific reports have investigated the heat generation and its underlying factors. To investigate, through a proper methodological approach, the main factors influencing temperature rise during piezoelectric implant site preparation. Different piezoelectric tips (IM1s, IM2, P2-3, IM3, Mectron Medical Technology, Carasco, Italy) have been tested. The experimental set-up consisted in a mechanical positioning device equipped with a load cell and a fluoroptic thermometer. The first tip of the sequence (IM1s) generated the highest temperature increasing (ΔT). The diamond tips (IM1s and P2-3) determined higher ΔT values than the smooth tips (IM2 and IM3). Further tests with IM1s suggested that the temperature elevation during the first thirty seconds may be predictive of the maximal temperature as well as of the overall thermal impact. Working load, working movements management and bone features resulted to be the main factors influencing temperature rise during piezoelectric implant site preparation. Irrigant temperature and clogging effect may also synergically contribute to the heat generation.

Introduction. Oral biopsy aims to obtain clear and safe diagnosis; it can be performed by scalpel or laser. The controversy in this latter application is the thermal alteration due to tissue heating. The aim of this study is the histological evaluation of margins of “in vivo” biopsies collected by diode and KTP lasers.Material and Methods. 17 oral benign lesions biopsies were made by diode 808 nm (SOL, DenMatItalia, Italy) and KTP 532 nm (SmartLite, DEKA, Italy). Samples were observed at OM LEICA DM 2000; margin alterations were evaluated through Leica Application Suite 3.4.Results. Epithelial and connective damages were assessed for each pathology with an average of 0.245 mm and a standard deviation of ±0.162 mm in mucoceles, 0.382 mm ± 0.149 mm in fibromas, 0.336 mm ± 0.106 mm in hyperkeratosis, 0.473 mm ± 0.105 mm in squamous hyperplasia, 0.182 mm in giant cell granuloma, and 0.149 mm in melanotic macula.Discussion. The histologic aspect of lesions influenced the response to laser, whereas the greater inflammation and cellularity were linked with the higher thermal signs. Many artifacts were also associated to histologic procedures.Conclusion. Both tested lasers permitted sure histologic diagnosis. However, it is suggested to enlarge biopsies of about 0.5 mm, to avoid thermal alterations, especially in inflammatory lesions like oral lichen planus.

This systematic review aimed to summarize published data on cohort studies investigating the association between the occupational exposure to radio frequencies and clinical outcome of head and neck cancers.We retrieved the relevant articles from PubMed and SCOPUS databases. Studies were selected using specific inclusion and exclusioncriteria: study design, professional exposure and type of head and neck cancers.Twenty-nine articles were included in the present analysis.Occupational exposure to radio frequencies might be associated with the development to head and neck cancer. No consistentevidences generally were found in the review. An interesting, even if weak, association with incidence of larynx tumor was found inthree studies: RR=1.46 (95%CI: 1.05-2.43) for all electronic workers; RR=1.4 (95%CI: 1.2-1.6) for male electrical workers; and asignificant SIR for electrical workers =1.39 (95%CI: 1.08-1.76).

Summary Osteosarcoma of the craniofacial bones (CFOS) usually behaves less aggressively than appendicular skeleton OS, resulting in a better therapeutic response to either surgery alone or multi-modality treatment. Here we report the case of a 54-year old male diagnosed with high-grade chondroblastic OS of the mandible, who presented with painful swelling of the horizontal branch of the right mandible, accompanied by paresthesias and paroxystic pain episodes. The patient was treated with aggressive surgery and adjuvant chemotherapy but, despite favorable clinical prognostic factors, disease rapidly progressed to local and distant relapse, causing the patient’s death 18 months after diagnosis.

The surgical procedures for implant applications on the lateral-upper areas depend on sinus pneumatization and availability of the residual bone. In these cases, autologous bone grafting remains the gold standard. Nevertheless, because of the morbidity associated to the donor site and the post-surgical complications, several alternative bone substitutes have been introduced, which, however, imply additional costs and show limited osteoinductive properties. Such limitations can be compensated with new regeneration strategies for biological and mechanical tissue restoration, a subject which has been addressed by tissue engineering in recent years. The authors present a new therapeutic option for implant application in the upper maxilla with bone availability less than 4 mm by using 3D scaffolds obtained from antigen-free porcine cartilage in the fit-lock technique. A longitudinal study on 18 consecutive cases was performed, with a 95.2% success rate one year after the implant. The advantages of this new technique are: 1) Functional and anatomical recovery of the maxillary antrum, 2) Immediate application of the implants; 3) Reduction of surgical times; 4) Absence of patient morbidity; 5) Local anesthesia; 6) Use of implants with a diameter4 mm.

One major challenge in treating head and neck oncologic patients is to achieve an acceptable recovery of physiologic functions compatible with the complete tumor excision. However, after tumor resection, some patients present a surgically altered anatomy incompatible with prosthetic rehabilitation, unless some soft tissue correction is carried out. The aim of the present study is to describe the overall mandibular prosthetic rehabilitation of a postoncologic patient focusing on the possibility of soft tissue correction as a part of the treatment. A 72-year-old woman, who undergone a hemiglossectomy for squamous cell carcinoma several years before, was referred to our department needing a new prosthesis. The patient presented partial mandibular edentulism, defects in tongue mobility, and a bridge of scar tissue connecting one side of the tongue to the alveolar ridge. A diode laser (980 nm) was used to remove the fibrous scar tissue. After reestablishing a proper vestibular depth and soft tissue morphology, two implants were placed in the interforaminal region of the mandible to support an overdenture.

Craniometaphyseal dysplasia (CMD) is a rare genetically transmitted bone dysplasia characterized by alterations in the development of the craniofacial bones with abnormal remodeling of the metaphyses. Sclerosis of the skull bones can lead to cranial nerve compression that finally may result in hearing loss and facial palsy. CMD occurs in an autosomal dominant (AD) (MIM 123000) and an autosomal recessive (AR) form (MIM 218400). Sclerosis of cranial bones is usually much more severe in the AR form. We present a 36-year-old male with a previous diagnosis of Paget disease. The examination reveals prognathism, ocular hypertelorism, mixed bilateral hypoacusia, nasal bossing, a class III malocclusion and a narrow palatal vault. The patient necessitated several dental extractions, surgical procedures were conducted, and a biopsy of the alveolus was performed and the sample underwent histological examination. The histological report led to an exclusion of the previous diagnosis of Paget disease. The final diagnosis of autosomal dominant CMD was confirmed by the molecular testing of the CMD gene (ANKH).

Synovial chondromatosis is a benign monoarticular arthropathy characterized by metaplastic cartilaginous foci developed in the synovial membrane. We present a review of the literature and report on five additional cases of synovial chondromatosis of the temporomandibular joint. Radiographic examination by computed tomographic scan allowed us to identify this disease as articular chondromatosis; however, a definitive diagnosis can be made only by histopathologic examination. In all cases surgical treatment led to the complete remission of symptomatology and to the functional recovery of the joint. Diagnosis and surgical therapy are discussed.