Search

This work presents a unique approach to the design, fabrication, and characterization of paper-based origami robotic systems consisting of stackable pneumatic actuators. These paper-based actuators (PBAs) use materials with high elastic modulus-to-mass ratios, accordion-like structures, and direct coupling with pneumatic pressure for extension and bending. The study contributes to the scientific and engineering understanding of foldable components under applied pneumatic pressure by constructing stretchable and flexible structures with intrinsically nonstretchable materials. Experiments showed that a PBA possesses a power-to-mass ratio greater than 80 W/kg, which is more than four times that of human muscle. This work also illustrates the stackability and functionality of PBAs by two prototypes: a parallel manipulator and a legged locomotor. The manipulator consisting of an array of PBAs can bend in a specific direction with the corresponding actuator inflated. In addition, the stacked actuators in the manipulator can rotate in opposite directions to compensate for relative rotation at the ends of each actuator to work in parallel and manipulate the platform. The locomotor rotates the PBAs to apply and release contact between the feet and the ground. Furthermore, a numerical model developed in this work predicts the mechanical performance of these inflatable actuators as a function of dimensional specifications and folding patterns. Overall, we use stacked origami actuators to implement functionalities of manipulation, gripping, and locomotion as conventional robotic systems. Future origami robots made of paper-like materials may be suitable for single use in contaminated or unstructured environments or low-cost educational materials.

In today’s era the content based video retrieval are major challengesdue to large storage, transmission, and downloading of videos. Video is retrieve based on visual content. Most of the researchers worked on low-level pixel content like shape, color and texture. In this paper, we review the content based video retrieval by using high-level features such as the spatio-temporal domain and review on the latest methods adopted by the researcher for video retrieval. The state-of-the-art of this paper mainly focuses on a review of video retrieval, its challenges, parameters consideration, and techniques that are to be incorporated.

The field of information security, in general, has seen shifts a traditional approach to an intelligence system. Moreover, an increasing of researchers to focus on propose intelligence systems and framework based on the forensic case studies because of the limitations of traditional methods such as analysis intensive data manually, intelligence visualization to make the evidence more understandable and intelligence system for store data. However, most of these intelligence systems are still facing different limitations. Furthermore, the primary goal of this work analysis popular intelligence system that was used based on forensic. Moreover, propose new algorithms and hybrid model which it's achieved good results in dif-ferent other fields to develop the forensic systems in the future.

Standards are a set of guidelines or criteria used to ensure consistency, quality, safety, and compatibility in products, services, and processes [...]

Background The screening of biological hazards, chemical contaminants and allergens in food products is a major concern of food industry since they can cause serious illnesses and even lead to death. Therefore, there is a significant interest in developing low-cost, robust, and rapid detection methods for food safety and quality analysis. Conventional methods provide accurate analytical characteristics, but require well-equipped laboratories, trained personnel, costly reagents, and complicated sample preparation procedures prior to the detection in order to obtain reliable results. Hence, they are not always ideal for on-site food surveillance. Scope and approach This paper discusses the fundamentals of microfluidic paper-based analytical devices (μPADs) and reviews the recent progress in their usage for screening biological hazards, harmful chemical residues, and allergens in food products to systematically evaluate the strengths and weaknesses of this technology. It then covers future trends and useful strategies that could be employed in μPADs design and fabrication procedures to address the critical challenges in equipment-free food analysis. Key findings and conclusions μPADs offer promising avenues to revolutionize food safety and quality analysis with merits of equipment-free sample preparation and detection at low-cost. Despite the advancement in the microfluidic technology, the manufacturing of user-friendly sample-to-answer μPADs still requires intensive research studies to be employed for robust and sensitive food safety and quality analysis.

A precoding technique based on polar codes and probabilistic shaping is introduced for dirty paper coding. Two variants of the precoding use multi-level shaping and sign-bit shaping in one dimension. The decoder uses multi-stage successive-cancellation list decoding with list-passing across the bit levels. The approach achieves approximately the same frame error rates as polar codes with multi-level shaping over standard additive white Gaussian noise channels at a block length of 256 symbols and with different amplitude shift keying (ASK) constellations.

Made available in DSpace on 2022-04-29T08:31:12Z (GMT). No. of bitstreams: 0 Previous issue date: 2021-10-01 Organization and planning of reverse logistics networks make sustainable processes more efficient. Thus, an important sector for connecting the collection and waste paper recycling echelons is the intermediate center. In this study, a Mixed Integer Linear Programming model, which is multi-objective, multi-product, multi-level and multi-period, was developed to optimize the waste paper logistics processes of intermediate centers. The formulation includes the following echelons: collection, considering vehicle routing with different capacities; inventory of non-baling materials; baling sorted waste and inventory of bales; selling bales; disposal of non-recyclable waste. The aims of the model include: maximizing the collected waste; minimizing distances; maximizing both the production and sale of bales, and minimizing costs. According to research carried out in the literature, the developed model is a new proposal and to implement it, the Weighted Goal Programming and Revised Multi-Choice Goal Programming approaches were used to deal with multiple objectives and incorporate uncertainty into the quantity of waste available for collection. To analyze the proposed model, computational tests were executed with instances based on real data from a Brazilian company in the sector. For all performed tests, General Algebraic Modeling System 23.6.5 modeling language and CPLEX 12.2.0.2 solver were used for modeling and optimization. The results show that this study presents formulation and technological approaches that represent real situations and provide competitive solutions to the problem. Sáo Paulo State University “Júlio de Mesquita Filho” [Universidade Estadual Paulista Júlio de Mesquita Filho] School of Engineering of Guaratinguetá [Faculdade de Engenharia de Guaratinguetá] Production Department, Av. Ariberto Pereira da Cunha, 333, Portal das Colinas Agulhas Negras Military Academy [Academia Militar das Agulhas Negras] Rodovia Presidente Dutra, km 306, s/n Escola Preparatória de Cadetes do Exército Avenida Papa Pio XII 350 Jardim Chapadão Campinas - SP Brazil, Avenida Papa Pio XII, 350, Jardim Chapadão, Campinas - SP Sáo Paulo State University “Júlio de Mesquita Filho” [Universidade Estadual Paulista Júlio de Mesquita Filho] School of Engineering of Guaratinguetá [Faculdade de Engenharia de Guaratinguetá] Production Department, Av. Ariberto Pereira da Cunha, 333, Portal das Colinas

The pulp and paper industry is highly energy-intensive. In mills that use chemical pulping, roughly half of the higher heating value of the cellulosic material used to manufacture the product typically is incinerated to generate steam and electricity that is needed to run the processes. Additional energy, much of it non-renewable, needs to be purchased. This review considers publications describing steps that pulp and paper facilities can take to operate more efficiently. Savings can be achieved, for instance, by minimizing unnecessary losses in exergy, which can be defined as the energy content relative to a standard ambient condition. Throughout the long series of unit operations comprising the conversion of wood material to sheets of paper, there are large opportunities to more closely approach a hypothetical ideal performance by following established best-practices.

The appearance and quick spread of the new severe acute respiratory syndrome coronavirus disease, COVID-19, brought major societal challenges. Importantly, suitable medical diagnosis procedures and smooth clinical management of the disease are an emergent need, which must be anchored on novel diagnostic methods and devices. Novel molecular diagnostic tools relying on nucleic acid amplification testing have emerged globally and are the current gold standard in COVID-19 diagnosis. However, the need for widespread testing methodologies for fast, effective testing in multiple epidemiological scenarios remains a crucial step in the fight against the COVID-19 pandemic. Biosensors have previously shown the potential for cost-effective and accessible diagnostics, finding applications in settings where conventional, laboratorial techniques may not be readily employed. Paper- and cellulose-based biosensors can be particularly relevant in pandemic times, for the renewability, possibility of mass production with sustainable methodologies, and safe environmental disposal. In this review, paper-based devices and platforms targeting SARS-CoV-2 are showcased and discussed, as a means to achieve quick and low-cost PoC diagnosis, including detection methodologies for viral genomic material, viral antigen detection, and serological antibody testing. Devices targeting inflammatory markers relevant for COVID-19 are also discussed, as fast, reliable bedside diagnostic tools for patient treatment and follow-up., The authors acknowledge funding through projects Eco2Covid (POCI-01-02B7-FEDER-068174) and TecniCov (POCI-01-02B7-FEDER-069745), co-funded by FEDER through COMPETE2020 and Lisboa2020. T.P., A.R.C. and A.C.M. acknowledge funding to National Foundation for Science and Technology, I.P., FCT, through their PhD grants, references DFA/BD/8606/2020, SFRH/BD/130107/2017 and SFRH/BD/115173/2016, respectively, info:eu-repo/semantics/publishedVersion

The majority of chemical experiments conducted during educational programs are carried out in laboratories because they require instructors with special skills, in addition to large, expensive instruments. Recently, there has been an increasing demand for chemical experiments that can be carried out anywhere. Herein, we propose a novel type of paper-based analytical device (PAD) for enabling quantitative analysis without the requirement for a micropipette, since the PAD features a large sample loading zone and a waste zone, enabling accurate volume control of a liquid sample. We initially employed a micropipette to evaluate the PAD and demonstrate the quantitative analysis of ascorbic acid (AA) and pH using different loading volumes. Finally, we determined the AA concentrations and pH values of commercially available beverages using disposable plastic droppers, and the obtained results were in good agreement with those obtained through conventional methods. This PAD format can therefore be used as a novel educational tool for conducting certain chemical analyses in remote learning environments.

This chapter describes the concept of paper space. Covered are the primary reasons for using paper space, how to get in/out of paper space, and how to set up title blocks (layouts), viewports and their properties, viewport scale assignments, controlling what is visible in viewports, setting up text and dim styles in viewports, and the annotative concept.

Graphical abstract Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations. Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03359-8.

The pulp and paper industry converts roundwood and recycled fibre, collected from wastepaper into printing and writing papers, and other specialty grades of paper. The pulp and paper mills in Ontar...

A newly developed research topic, fabricated paper-based microfluidic sensors, was discussed in the field of low-cost environmental detection. Distinguished with the traditional dipstick or lateral-flow setups, these paper-based microfluidic sensors can serve as a tool for onsite quantitative and semi-quantitative measurements, without risks to cause environmental pollution. They have attracted increasing interest since the first easy-fabricated paper-based setup reported by Whitesides group in 2007. Most of the publications utilized paper-based sensors in clinical detection. In recent years, some groups started to use these sensors in environmental measurement, leading to precise, easy operation, low-cost, and eco-friendly methods for onsite detection. In this review, paper-based microfluidic sensors were briefly introduced, followed by literatures review and discussion for future perspectives.

Teaching about biodiversity and its conservation could be an effective way to teach the importance of different species and human dependence on ecological support systems. This study compares the effectiveness of a digital and a paper-based dichotomous identification key for teaching pre-service teachers about plantspecies diversity. Twenty-four Slovenian teachers in pre-service training used a digital version of the key on tablet computers and twenty-nine used a paper-based version to identify woody species in the garden near their university faculty. Both keys contained the same species, identical photographs and the same sequence of steps to identify the species. The accuracy and time taken to identify the five species were measured. The participants also completed a questionnaire about the usability of the identification key. Overall, both versions of the key were equally good for determining species names. The digital version of the key was found to be more time-effective than the paper version only when multiple identification steps were required to identify species. The results confirm that those who scored better on the identification tasks have a better general opinion about the usability of the key especially students using digital version of the key. Implications for teachers using or creating identification keys are discussed in the conclusion.

Continuous manufacturing is an indicator of a maturing industry, as can be seen by the example of the petrochemical industry. Patent expiry promotes a price competition between manufacturing companies, and more efficient and cheaper processes are needed to achieve lower production costs. Over the last decade, continuous biomanufacturing has had significant breakthroughs, with regulatory agencies encouraging the industry to implement this processing mode. Process development is resource and time consuming and, although it is increasingly becoming less expensive and faster through high‐throughput process development (HTPD) implementation, reliable HTPD technology for integrated and continuous biomanufacturing is still lacking and is considered to be an emerging field. Therefore, this paper aims to illustrate the major gaps in HTPD and to discuss the major needs and possible solutions to achieve an end‐to‐end Integrated Continuous Biomanufacturing, as discussed in the context of the 2019 Integrated Continuous Biomanufacturing conference. The current HTPD state‐of‐the‐art for several unit operations is discussed, as well as the emerging technologies which will expedite a shift to continuous biomanufacturing., With an ever‐growing interest in shifting to integrated continuous biomanufacturing (ICB), the major gaps and state‐of‐the‐art perceived by academia and industry members in high‐throughput process development (HTPD) technologies for the development and implementation of this type of operation (ICB) are debated in this paper, with a special focus on the HT tools for the different unit operations in a typical biopharmaceutical process. The current needs in ICB and possible solutions to fulfill these needs are also highlighted

One of the most cited limitations of biochemical detection is its poor sensitivity, owing to the relatively high complexity of micro-samples. Moreover, some samples cannot be easily self-replicated and their abundance cannot be increased through traditional technologies. Therefore, the preconcentration of low-abundance samples is a key requirement for microfluidic biological analysis. In recent years, the ion-concentration polarization phenomenon has aroused widespread interest in the application of microfluidic technology. In addition, paper-based materials are readily available, easy to modify, and exhibit good hydrophilicity. The study of the ion-concentration polarization preconcentration of micro-samples in paper-based microfluidic chips is of considerable significance. In this review, we discuss the development and applications of ion-concentration polarization paper-based preconcentrator in the past 5 years, with emphasis on key progresses in chip fabrication and performance optimization under different conditions. The current needs and development prospects in this field have also been discussed.

In the past decade, the use of multiple-criteria decision analysis technology has dramatically increased in solving complex real-world problems in solid waste management. Likewise, many municipalities have paid attention to finding feasible solutions for disposal and recycling of solid waste due to the increase in waste generation rates worldwide. Therefore, policy-makers must determine which recycling program to be implemented among various recycling program options. In this paper, a new approach to select a recycling program for recovered paper and pulp recyclables was proposed using analytic hierarchy process–Technique for Order Preference by Similarity to Ideal Solution (AHP-TOPSIS) techniques. A set of essential parameters of the decision-making system were identified, and a numerical case to illustrate the procedure was conducted. Our findings show very encouraging results to use a combined model between AHP and TOPSIS to select a suitable recycling program for different recovered recyclable materials.

Microfluidic paper-based analytical devices (μPADs) have developed rapidly in recent years, because of their advantages, such as small sample volume, rapid detection rates, low cost, and portability. Due to these characteristics, they can be used for in vitro diagnostics in the laboratory, or in the field, for a variety of applications, including food evaluation, disease screening, environmental monitoring, and drug testing. This review will present various detection methods employed by μPADs and their respective applications for the detection of target analytes. These include colorimetry, electrochemistry, chemiluminescence (CL), electrochemiluminescence (ECL), and fluorescence-based methodologies. At the same time, the choice of labeling material and the design of microfluidic channels are also important for detection results. The construction of novel nanocomponents and different smart structures of paper-based devices have improved the performance of μPADs and we will also highlight some of these in this manuscript. Additionally, some key challenges and future prospects for the use of μPADs are briefly discussed.

In this paper, the implementation of artificial neural networks (multilayer perceptron [MLP] and radial base functions [RBF]) and the upgraded Markov chain model have been studied and performed to identify the human behavior patterns during rock, paper, and scissors game. The main motivation of this research is the design and construction of an intelligent robot with the ability to defeat a human opponent. MATLAB software has been used to implement intelligent algorithms. After implementing the algorithms, their effectiveness in detecting human behavior pattern has been investigated. To ensure the ideal performance of the implemented model, each player played with the desired algorithms in three different stages. The results showed that the percentage of winning computer with MLP and RBF neural networks and upgraded Markov model, on average in men and women is 59%, 76.66%, and 75%, respectively. Obtained results clearly indicate a very good performance of the RBF neural network and the upgraded Markov model in the mental modeling of the human opponent in the game of rock, paper, and scissors. In the end, the designed game has been employed in both hardware and software which include the Zana intelligent robot and a digital version with a graphical user interface design on the stand. To the best knowledge of the authors, the precision of novel presented method for determining human behavior patterns was the highest precision among all of the previous studies.

In this paper, we present a system for automatic evaluation of the quality of a question paper. Question paper plays a major role in educational assessment. The quality of a question paper is crucial to fulfilling the purpose of the assessment. In many education sectors, question papers are prepared manually. A prior analysis of a question paper might help in finding the errors in the question paper, and better achieving the goals of the assessment. In this experiment, we focus on higher education in the technical domain. First, we conducted a student survey to identify the key factors that affect the quality of a question paper. The top factors we identified are question relevance, question difficulty, and time requirement. We explored the strategies to handle these factors and implemented them. We employ various concepts and techniques for the implementation. The system finally assigns a numerical quality score against these factors. The system is evaluated using a set of question papers collected from various sources. The experimental results show that the proposed system is quite promising.

Replication data and results for Langenhorst, Jan/Frommherz, Yannick/Meier-Vieracker, Simon: Keyness in song lyrics. Challenges of highly clumpy data. In: Journal for Language Technology and Computational Linguistics. This data set contains * Python module used to obtain results presented in paper * Jupyter Notebooks to generate results and create plots * Complete keyword/key-ngram lists * A 'shuffled' version of the songkorpus used in our analysis (replication of ngrams not possible, only keywords)

In the tourism industry, the sales of local specialties is an important part, and the package design and integrity of the specialties are very important. This paper first introduced the support vector machine (SVM) algorithm that was used for detecting defects on the surface of paper packages. Then, the design of red wind packages was briefly described, and the simulation experiment was carried out on SVM algorithm using red wine packages with different degrees of surface defects. Proper parameters were tested using the k-fold cross-validation method. The results demonstrated that the properties of paper improved the value of packages and the SVM algorithm had better accuracy than artificial recognition in recognizing different degrees of defects on the surface of packages. In conclusion, this paper describes the application of paper in packages and provides an effective method for the defection of defects on the surface of packages. This study provides an effective references to the improvement of package values and the enhancement of package integrity.

Tissue biomarkers have been of increasing utility for scientific research, diagnosing disease, and treatment response prediction. There has been a steady shift away from qualitative assessment toward providing more quantitative scores for these biomarkers. The application of quantitative image analysis has thus become an indispensable tool for in-depth tissue biomarker interrogation in these contexts. This white paper reviews current technologies being employed for quantitative image analysis, their application and pitfalls, regulatory framework demands, and guidelines established for promoting their safe adoption in clinical practice.

Microfluidic paper-based analytical devices are emerging as promising options for on-the-spot detection of chemical contaminants in water. The coupling of these devices with digital imaging technol...

Graphical Abstract Illustration of the assembly, distribution, and point-of-care use of a rapidly-deployable, cell-free COVID-19 biosensor: 1) Assemble: Assembling CFPS reagents by mixing E. coli lysate, murine RNase Inhibitor (mRI), energy sources, cofactors, and toehold switch riboregulator plasmid. 2) Print: aliquoting CFPS reagents onto paper substrates housed in a plastic test cassette. 3) Dehydrate: lyophilizing CFPS reagents on paper substrates. 4) Distribute. 5) Saliva sample: applying saliva samples onto cassette without pretreatments. 6) Reaction: bioluminescent protein expression in presence of target RNA (+), or ribosome detachment in absence of target RNA (-). 7) Visual result: bioluminescent output in the presence of target RNA and NanoLuc luciferase expression., The COVID-19 pandemic has illustrated the global demand for rapid, low-cost, widely distributable and point-of-care nucleic acid diagnostic technologies. Such technologies could help disrupt transmission, sustain economies and preserve health and lives during widespread infection. In contrast, conventional nucleic acid diagnostic procedures require trained personnel, complex laboratories, expensive equipment, and protracted processing times. In this work, lyophilized cell-free protein synthesis (CFPS) and toehold switch riboregulators are employed to develop a promising paper-based nucleic acid diagnostic platform activated simply by the addition of saliva. First, to facilitate distribution and deployment, an economical paper support matrix is identified and a mass-producible test cassette designed with integral saliva sample receptacles. Next, CFPS is optimized in the presence of saliva using murine RNase inhibitor. Finally, original toehold switch riboregulators are engineered to express the bioluminescent reporter NanoLuc in response to SARS-CoV-2 RNA sequences present in saliva samples. The biosensor generates a visible signal in as few as seven minutes following administration of 15 μL saliva enriched with high concentrations of SARS-CoV-2 RNA sequences. The estimated cost of this test is less than 0.50 USD, which could make this platform readily accessible to both the developed and developing world. While additional research is needed to decrease the limit of detection, this work represents important progress toward developing a diagnostic technology that is rapid, low-cost, distributable and deployable at the point-of-care by a layperson.

We attempt to replicate 67 papers published in 13 well-regarded economics journals using author-provided replication files that include both data and code. Some journals in our sample require data and code replication files, and other journals do not require such files. Aside from 6 papers that use confidential data, we obtain data and code replication files for 29 of 35 papers (83%) that are required to provide such files as a condition of publication, compared to 11 of 26 papers (42%) that are not required to provide data and code replication files. We successfully replicate the key qualitative result of 22 of 67 papers (33%) without contacting the authors. Excluding the 6 papers that use confidential data and the 2 papers that use software we do not possess, we replicate 29 of 59 papers (49%) with assistance from the authors. Because we are able to replicate less than half of the papers in our sample even with help from the authors, we assert that economics research is usually not replicable. We conclude with recommendations on improving replication of economics research. JEL Codes: B41; C80; C82; C87; C88; E01

The development of industry and of the Internet of Things (IoTs) have brought energy issues and huge challenges to the environment. The emergence of triboelectric nanogenerators (TENGs) has attracted wide attention due to their advantages, such as self-powering, lightweight, and facile fabrication. Similarly to paper and other fiber-based materials, which are biocompatible, biodegradable, environmentally friendly, and are everywhere in daily life, paper-based TENGs (P-TENGs) have shown great potential for various energy harvesting and interactive applications. Here, a detailed summary of P-TENGs with two-dimensional patterns and three-dimensional structures is reported. P-TENGs have the potential to be used in many practical applications, including self-powered sensing devices, human–machine interaction, electrochemistry, and highly efficient energy harvesting devices. This leads to a simple yet effective way for the next generation of energy devices and paper electronics.

This study aims at understanding the role of the tools chosen throughout the processes of solving a non-routine mathematical problem and communicating its solution. In assuming that problem-solving is a synchronous activity of mathematization and expression of mathematical thinking we take our proposed Mathematical Problem Solving with Technology (MPST) model to analyze the processes of solving-and-expressing-problems. Resorting to qualitative methods for data collection and analysis, we report on the case of an 8th grader working on a covariation problem to examine the role that paper-and-pencil and digital tools play in the development of a conceptual model of the situation. We found that the resources used throughout the solving-and-expressing activity influenced the depth of the conceptual model developed, within a process of progressive mathematization. Whereas paper-and-pencil led to the emergence of a conceptual model based on exploring particular cases, the digital transformation of the solution was triggered by the process of communicating its mathematical justification and expanded the previous model. Moreover, the complexity of this activity is evidenced by its multiple sequences of processes. Finally, the integration process seems crucial as the concomitant use of technological and mathematical resources precedes major advancements in the expansion of the conceptual model.

The aim of this review is to introduce the information concerning advanced technology of ink-jet printing regarding characteristics and ink-jet paper. It is believed that ink-jet paper having suitable liquid absorption characteristics and drying techniques are required to improve image quality on high-speed inkjet printing. Although the development of high quality ink-jet paper is important, the demand or the dual-purpose coated paper that can be used with offset and ink-jet printing is expected to increase for the time being. Meanwhile, it is important to get cost down and raise the productivity of the inkjet paper to secure competitiveness comparable to that of offset coated paper. For those objectives we think that the development of new technologies is required for pigment development, composition design of the coating ingredients, and rheological characteristics analysis of coating colors.

PurposeThis study develops an integrated zero waste discharge planning approach for improving resource efficiency in a pulp-and-paper manufacturing firm.Design/methodology/approachThe objectives of this study are to (1) identify the environmental, technical and social metrics in resource efficiency; (2) utilize fuzzy multi-objective programming and the hybrid particle swarm optimization algorithm to solve the fuzzy problem; and (3) develop an assessment for resource efficiency improvement in an industrial case study.FindingsThe findings demonstrate the superiority of hybrid particle swarm optimization algorithm in generating optimal results for a pulp-and-paper manufacturing firm.Practical implicationsThe findings demonstrate the superiority of hybrid particle swarm optimization algorithm in generating optimal results for a pulp-and-paper manufacturing firm.Originality/valueResource efficiency is a multi-objective problem in an uncertain environment. In particular, zero waste discharge planning involves minimizing the total cost and maximizing the waste material recovery rate, wastewater reuse, and waste heat recovery.

Compared with a single chemical indicator, the use of multivariate chemical indicators in aging status assessment of transformer cellulose paper insulation can improve the reliability of the evaluation. In this study, a non-destructive method based on multivariate chemical indicators was proposed to evaluate the remaining life of cellulosic paper insulation. The selected chemical indicators closely related to the aging of the insulating paper were analyzed. Additionally, by applying the subjective and objective weighting method, the evaluation information of each indicator was fully extracted to obtain reasonable comprehensive evaluation weights. Besides, the comprehensive evaluation index of multivariate chemical indicators was obtained by using the technique for order preference by similarity to ideal solution method, which is consistent with the deterioration law of paper insulation. Then, the correlation lifespan model between the comprehensive evaluation index of multivariate chemical indicators and the degree of polymerization of insulating paper under different aging stages was established. The effectiveness of the proposed model was verified by experiments. This promising model can increase the accuracy of the condition assessment for the transformer cellulosic paper insulation.

Antimicrobial resistance is increasingly recognized as a major threat to global health. To combat this emerging threat, accessible antimicrobial susceptibility testing should be prioritized as a key component of stewardship efforts. In this work, we developed a user-friendly paper-based test that provides visual readout of bacterial antibiotic susceptibility in a semiquantitative format. We leveraged on-chip paper microfluidics to enable multiplexed testing of multiple antibiotic dilutions with a single sample addition step, replicating the functionality of traditional broth-dilution-based susceptibility testing in a simplified format. Our paper-based test offers several advantages including low sample volume requirement and lack of need for humidity control during incubation, an innovation that addresses a key limitation of conventional paper-microfluidic devices. Using several clinically relevant bacterial organisms and antimicrobial agents, we demonstrate that our colorimetric readout approach provides a strong predictor of susceptibility category.

Papers published in top conferences or journals is an important measure of the innovation ability of institutions, and ranking paper acceptance rate can be helpful for evaluating affiliation potential in academic research. Most studies only focus on the paper quality itself, and apply simple statistical data to estimate the contribution of institutions. In this work, a novel method is proposed by combining different types of features of affiliation and author to predict the paper acceptance at the institutional level. Based on the history of the paper published, this work firstly calculates the affiliation scores, constructs an institutional collaboration network and analyzes the importance of the institutions using network centrality measures. Four measures about the authors’ influence and capability are then extracted to take the contributions of authors into consideration. Finally, a random forest algorithm is adopted to solve the prediction problem of paper acceptance. As a result, this paper improves the ranking of the paper acceptance rate NDCG@20 to 0.865, which is superior to other state-of-the-art approaches. The experimental results show the effectiveness of proposed method, and the information between different types of features can be complementary for predicting paper acceptance rate.

Behavioral diversity seen in biological systems is, at the most basic level, driven by interactions between physical materials and their environment. In this context we are interested in falling paper systems, specifically the V-shaped falling paper (VSFP) system that exhibits a set of discrete falling behaviors across the morphological parameter space. Our previous work has investigated how morphology influences dominant falling behaviors in the VSFP system. In this article we build on this analysis to investigate the nature of behavioral transitions in the same system. First, we investigate stochastic behavior transitions. We demonstrate how morphology influences the likelihood of different transitions, with certain morphologies leading to a wide range of possible paths through the behavior-space. Second, we investigate deterministic transitions. To investigate behaviors over longer time periods than available in falling experiments we introduce a new experimental platform. We demonstrate how we can induce behavior transitions by modulating the energy input to the system. Certain behavior transitions are found to be irreversible, exhibiting a form of hysteresis, while others are fully reversible. Certain morphologies are shown to behave like simplistic sequential logic circuits, indicating that the system has a form of memory encoded into the morphology–environment interactions. Investigating the limits of how morphology–environment interactions induce non-trivial behaviors is a key step for the design of embodied artificial life-forms.

Edible oils form an integral component in the human diet as well as in the industrial preparations. Any adulteration in oil is concerning from nutritional as well as economical perspective. Although analytical techniques exist for detection of adulterants in oil, most of them require sophisticated instruments, and trained professionals. Microfluidic based lab-on-a-chip technologies have rapidly progressed over the recent years and offer promising alternatives in this regard. In this work, we report development of a paper-based microfluidic lab-on-a-chip for detection of palm oil contamination in sunflower oil. We use the paper-based microfluidic colorimetric detection approach that indicates the presence of adulteration in a visual manner. The data is analyzed using digitally acquired images along with ultraviolet–visible spectrophotometry. The paper-based microfluidic device is fabricated and tested for 10–50% (v/v) palm oil adulteration in sunflower oil. Further, we employ the device for free fatty acid content tests in oil samples. Visual signal acquired from the device is optimized by varying phenolphthalein proportions. The stability of visual colorimetric signal is examined over time and is found to remain steady over the trial period of six days considered in this work. The integration of the detection device with smartphone imaging can prove to be useful for onsite data collection. We believe the approach presented here can be extended to food quality monitoring portable platforms.

Introduction We developed low-cost, portable paper-based diagnostic devices for detection of human immunoglobulin M (IgM) and immunoglobulin G (IgG) in serum without any sample preparation. These devices can be used to help identify presence of diseases, used to provide rapid results ( Materials and Methods We successfully accomplished colorimetric detection of human IgG and human IgM using a sandwich-style assay within the microfluidic paper device via vertical flow immunoassay configuration. The reaction zone in the wax printed paper layer is a small circular pattern. Gold nanoparticles conjugated with anti-human IgG and IgM antibodies have been used for colorimetric detection of IgG or IgM by naked eye. Colorimetric signal can be precisely quantified through implementation of image analysis software which can be developed as an app for a smartphone. The size of the device is 2 cm × 2 cm × 1 mm. Results Colorimetric detection of human IgG was accomplished at 100 fg/mL concentration using a gold nanoparticle–conjugated anti-human IgG antibody. The developed platform has a dynamic range of IgM and IgG concentrations between 0.1 pg/mL and 100 μg/mL. These devices provided a color readout in Conclusions Because of the inherent simplicity of the device operation and their ease of use, there is no variation between samples and users of the device. This low-cost approach enables multiplexing with >1 measurement performed in parallel at the same time. We anticipate that because of the sensitivity, specificity, ease of use, and overall reliability, this approach will become a standard for diagnosis of diseases and health conditions.

Cocaine (COC) is one of the most widely consumed illegal drugs around the world. Street COC is commonly adulterated with pharmaceutical compounds that mimic or intensify the COC's sensory effect. Adulteration is performed to increase the profit of criminal organizations and each one has their own way of doing it. Therefore, determining the composition of seized COC samples (chemical profile) provides evidence for the police to track criminal organization networks and their activity patterns. Using filter paper as a substrate, we developed a multiple detection paper-based analytical device (PAD) that combines colorimetric and electrochemical measurements to discriminate COC samples according to adulterant's content. A regular graphite lead modified with a gold film made from Au leaf (graphite/Au) to improve electron transfer was used as a working electrode. Silver and Ag/AgCl were used as auxiliary and reference electrodes, respectively. The colorimetric device was patterned using a laser cutter and coupled to the electrochemical device using a double-sided tape, allowing simultaneous analysis to gather more analytical information about COC samples. Graphite/Au was characterized by scanning and transmission electron microscopies and electrochemical assays. The simultaneous colorimetric and electrochemical analyses combined to principal component analysis improved the analytical characterization of COC trial samples and provided a fast discrimination based on the assembled database.

Zinc and its compounds, alloys and composites play an important role in the modern day world and find application in almost every aspect that can improve the quality of our lives. This ranges from supplements and pharmaceuticals that are meant to improve our health and wellbeing to additives meant to guard or reduce corrosion in metals. However, over the past several years, a new area of technology has been garnering a great deal of attention and has made use of zinc and its compounds. This is with reference to paper-based microfluidic technology that offers several advantages and that keeps expanding in the amount of applications it covers. In this paper, a review is offered for the applications that have used zinc or zinc compounds in paper-based microfluidic devices.

The waste of paper or the paper dump is a serious problem and its occurrence is widespread in various institutions. Wastepaper can be recycled to produce some important and usable products that are ecological and biodegradable. For example, it is used to extract new paper from the old by chemical decomposition. Other products such as paper plates, paper cups, paper spoons, tiles, toys, crafts, etc. can be formed from the slurry. This project also initiates a mould that makes cups and plates from the wastepaper management circuit. With learning institutions being the main consumers, most paper are usually eliminated after its use. The waste remains undeveloped and unused, although is a valuable resource. Studying the design of a manual, economical and efficient paper recycling machine, it can be surmised that the design uses the integration of the knowledge gained about the recycling technology that exists manually from the paper recycling machines used to form a cheap but effective paper recycling system. The advantages of the machine are not only of recycled paper, but also the advantages of the interaction of the manual drive system, which will also reduce the high cost. As the design is not 100% effective, the transmission, belt and chain transmission correspond to the estimated 90% efficiency using the 90% for the design. The power consumption for the design is 450 W and since an average user can produce 100 W constant, it takes 5 people to drive the machine.

Infectious diseases cause millions of deaths annually in the developing world. Recently, microfluidic paper-based analytical devices (μPADs) have been developed to diagnose such diseases, as these tests are low cost, biocompatible, and simple to fabricate. However, current μPADs are difficult to use in resource-limited areas due to their reliance on external instrumentation to measure and analyze the test results. In this work, we propose an electricity and external instrumentation-free μPAD sensor based on the colorimetric enzyme-linked immunosorbent assay (ELISA) for the diagnosis of infectious disease (3D-tPADs). Designed based on the principle of origami, the proposed μPAD enables the sequential steps of the colorimetric ELISA test to be completed in just ∼10 min. In addition, in order to obtain an accurate ELISA result without using any instrument, we have integrated an electricity-free "timer" within the μPAD that can be controlled by the buffer viscosity and fluid path volume to indicate the appropriate times for washing and color development steps, which can avoid false positive or false negative results caused by an extended or shortened amount of washing and development times. Due to the low background noise and high positive signal intensity of the μPAD, positive and negative detection results can be distinguished by just the naked eye. Furthermore, the ELISA result can be semi-quantified by comparing the results shown on the μPAD with a color chart diagram with a detection limit of HIV type 1(HIV-1) p24 antigen as low as 0.03 ng mL-1. These results demonstrate the proposed sensor can perform infectious disease diagnosis without external instrumentation or electricity, extending the application of the μPAD test for on-site detection and use in resource-limited settings.

In recent times, it has been witnessed that wireless systems based on IoT-based have developed rapidly in various sectors. The IoT (Internet of Things) is the network in which physical devices, equipment, sensors and other objects can communicate among themselves without human involvement. The WSN (Wireless Sensor Network) is a central component of the IoT, which has proliferated into several different applications in real-time. The IoT and WSNs now have various critical and non-critical applications impacting nearly every area of our everyday life. WSN nodes are usually small and battery-driven machines. Thus, the energy effective data aggregation techniques that increase the lifespan of the network are highly significant. Various approaches and algorithms for energy-efficient data aggregation in IoT-WSN systems were presented. This paper reviews the literature with specific attention to aspects of wireless networking for the preservation of energy and aggregation of data.

Papers are the most commonly used substrates. A printable paper must have certain properties. These properties include surface smoothness, air permeability, surface energy, colour of the paper, opacity, whiteness, light fastness, gloss, and coefficient of elongation under force. In addition, a good printable paper should not allow ink to pass between its two surfaces. After the papers are produced, they are subjected to surface treatments in order to improve the above-mentioned properties and to provide extra specification. Surface treatments include calendering, surface sizing and coating processes. While filling the recesses and protrusions on the surface with the coating process, the paper's affinity for the ink is increased, and the penetration of the ink to the other surface of the paper is prevented. In the coating process basically, a filler is dispersed in a binder. In this study, it is aimed to obtain the highest quality and most printable paper by changing the type of binder used in the coating. In this study, equal amount (5% w/w) titanium dioxide filler was used in all coating formulations. In coating formulations; cationic starch, hydroxy ethyl cellulose and polyvinyl alcohol polymers were used as binders. Binder amounts are adjusted according to optimum viscosity. The obtained coating formulations were coated on the paper surface with a laboratory type coating device. Colour, gloss, surface smoothness, air permeability, surface energy and surface morphology of the coated papers were determined. It was printed with magenta offset printing ink on three different types of paper coated with different binders, using the IGT C1 offset printability test device, under 400 N/m2 pressure printing conditions. Colour and gloss measurements of the prints were made. As a result; It was determined that three different binders improved the printability parameters.

Paper-based microfluidic devices are popular for their ability to automate multistep assays for chemical or biological sensing at a low cost, but the design of paper microfluidic networks has largely relied on experimental trial and error. A few mathematical models of flow through paper microfluidic devices have been developed and have succeeded in explaining experimental flow behavior. However, the reverse engineering problem of designing complex paper networks guided by appropriate mathematical models is largely unsolved. In this article, we demonstrate that a two-dimensional paper network (2DPN) designed to sequentially deliver three fluids to a test zone on the device can be computationally designed and experimentally implemented without experimental trial and error. This was accomplished by three new developments in modeling flow through paper networks: (i) coupling of the Richards equation of flow through porous media to the species transport equation, (ii) modeling flow through assemblies of multiple paper materials (test membrane and wicking pad), and (iii) incorporating limited-volume fluid sources. We demonstrate the application of this model in the optimal design of a paper-based signal-enhanced immunoassay for a malaria protein, PfHRP2. This work lays the foundation for the development of a computational design toolbox to aid in the design of paper microfluidic networks. ©

Introduction: Water is essential for normal functioning of the human body. Total fluid intake assessment using fluid record method is considered to be a burden for respondents, and the development of technology is expected to contribute favourably to this issue. My Fluid Diary is a smartphone-based application developed by the researcher as a fluid intake recording tool. This study aimed to evaluate the acceptance of manual, paper-based fluid intake recording compared to using My Fluid Diary as a trial among Indonesian vocational female students. Methods: A qualitative study was conducted to explore students’ acceptance of fluid intake recording using the smartphone-based application. An exploratory case study approach involving 38 female students as key informants was used via focus group discussion and in-depth interview as a method of triangulation. Results: Based on the data, female adolescents admitted that the application was more acceptable for fluid intake than recording manually using a book, in consideration of three aspects - the benefits, the easiness, and the application display or features. Based on its benefits, My Fluid Diary was mentioned as easy to learn and use. However, in order to improve the application, there is still a need for research development. Conclusion: My Fluid Diary was an application with respectable acceptance for fluid record compared to the manual, paper-based method among female adolescents.

Physical paper puppets are inanimate objects, but when we’re speaking in terms of the production of traditional paper cut out animation, they become the actors and the souls that drive the movie. When shooting and animating traditional paper cut out animation, the puppets are laid flat on a surface so they can only move in limited directions compared to conventional 2D or 3D animation. As we know, each character in animated movie has its own personality and unique to each other. The challenge lays in bringing out the characteristics and personality of the character through the limited medium of paper puppet. In this qualitative research, puppet movements will be applied to quadruped cat characters in a public service announcement titled “Spay & Neuter”. The puppet along with the visual design, segmentations, and joints were done in previous research. Qualitative observations and audio-visual materials are used to collect the data for references. Literature review will study the characteristics of cats, body language, behaviour, and principles of animation especially timing and exaggeration. Observation is conducted by studying the movements of real cats from online videos and direct observations and also studying how other animators animate cat characters in animated films. In the exploration stage, paper puppets will be animated according to the movement design while experimenting with the timing and frame rate of the stop motion to achieve the final results.