Search

A series of new coloring materials in nanoscale based on 5-(2-aminothiazol-5-yl) thiazol-2-amine and 5-(4-aminophenyl) thiazol-2-amine were synthesized. The nanoscale pigments were prepared using a grinding high˗energy ball-milling technique. X-ray diffraction and transmission electron microscopy were employed to determine the particle size of the nanoscale pigments (40–80 nm). The synthesized pigments in normal and nanoscale were applied in the printing of polyester fabrics. The fastness and colorimetric properties of the printed samples were carefully studied. Additionally, the synthesized pigments were applied as water-based flexographic ink for paper and carton. The hue of the color pigments L*, a*, b*, glossiness, and fastness to light were measured. The comparison of the new heterocyclic benzidine analogs in normal and nanoscale with commercial benzidine pigments demonstrated better results, particularly for the nanoscale pigments.

SummaryInhibitors of the cyclin-dependent kinases 4/6 (CDK4/6i) have been practice-changing and are now considered the standard of care in combination with endocrine therapy for the first- or second-line treatment in advanced hormone-receptor-positive, human epidermal growth factor receptor 2‑negative breast cancer. Recently, CDK4/6i have also emerged as an appealing targeted cancer therapy in early breast cancer, however results of large clinical trials are controversial. This position paper summarizes the evidence, and provides guidance for clinical practice.

Magnetic Resonance Imaging linear-accelerator (MRI-linac) equipment has recently been introduced to multiple centres in Australia and New Zealand. MRI equipment creates hazards for staff, patients and others in the MR environment; these hazards must be well understood, and risks managed by a system of environmental controls, written procedures and a trained workforce. While MRI-linac hazards are similar to the diagnostic paradigm, the equipment, workforce and environment are sufficiently different that additional safety guidance is warranted. In 2019 the Australasian College of Physical Scientists and Engineers in Medicine (ACPSEM) formed the Magnetic Resonance Imaging Linear-Accelerator Working Group (MRILWG) to support the safe clinical introduction and optimal use of MR-guided radiation therapy treatment units. This Position Paper is intended to provide safety guidance and education for Medical Physicists and others planning for and working with MRI-linac technology. This document summarises MRI-linac hazards and describes particular effects which arise from the combination of strong magnetic fields with an external radiation treatment beam. This document also provides guidance on safety governance and training, and recommends a system of hazard management tailored to the MRI-linac environment, ancillary equipment, and workforce.

Consistency and clear guidelines on dosimetry are essential for accurate and precise dosimetry, to ensure the best patient outcomes and to allow direct dose comparison across different centres. Magnetic Resonance Imaging Linac (MRI-linac) systems have recently been introduced to Australasian clinics. This report provides recommendations on reference dosimetry measurements for MRI-linacs on behalf of the Australiasian College of Physical Scientists and Engineers in Medicine (ACPSEM) MRI-linac working group. There are two configurations considered for MRI-linacs, perpendicular and parallel, referring to the relative direction of the magnetic field and radiation beam, with different impacts on dose deposition in a medium. These recommendations focus on ion chambers which are most commonly used in the clinic for reference dosimetry. Water phantoms must be MR safe or conditional and practical limitations on phantom set-up must be considered. Solid phantoms are not advised for reference dosimetry. For reference dosimetry, IAEA TRS-398 recommendations cannot be followed completely due to physical differences between conventional linac and MRI-linac systems. Manufacturers’ advice on reference conditions should be followed. Beam quality specification of TPR20,10 is recommended. The configuration of the central axis of the ion chamber relative to the magnetic field and radiation beam impacts the chamber response and must be considered carefully. Recommended corrections to delivered dose are $${k}_{{Q}_{msr}{Q}_{0}}^{{f}_{msr}{f}_{ref}}$$ k Q msr Q 0 f msr f ref , a correction for beam quality and $${k}_{\overrightarrow{B},{Q}_{msr}}^{{f}_{msr}}$$ k B → , Q msr f msr , for the impact of the magnetic field on dosimeter response in the magnetic field. Literature based values for $${k}_{\overrightarrow{B},{Q}_{msr}}^{{f}_{msr}}$$ k B → , Q msr f msr are given. It is important to note that this is a developing field and these recommendations should be used together with a review of current literature.

Publisher Copyright: © 2022, The Author(s). Direct fire, indirect heat, and extinguishing water cause great damage to cultural assets upon a fire disaster in a library or archive. Conservation and restoration of heat-damaged papers are particularly challenging due to the complexity and severity of the damage. Since valuable originals obviously cannot be used for the development of treatment methods and only to a limited extent for the analysis of the damage, it is necessary to produce model paper materials that have a high degree of similarity to fire-damaged papers, which was addressed in the present study. Three different heating methods were tested to produce model papers of different heating levels. Their altered optical, structural, and chemical properties were analyzed and compared with the results of original fire-damaged samples. The study points out pathways to enable the production of comparable sample materials. Heating between hot plates or in an oven produces papers that have properties quite similar to the originals in terms of surface area, paper structure, cellulose integrity, and interactions with water. Stack heating in the oven has proven to be a particularly effective manufacturing method for larger quantities of model papers.

We present a historical study of Quantum Technology 2.0 using more than 66,000 papers from 1980 to 2020 that had been assigned to four subfields. We applied the method reference publication year spectroscopy to respective publication sets of the subfields in order to identify their historical roots and seminal papers. We found 126 of them in total, 43 in quantum metrology and sensing, 46 in quantum communication and cryptography, 42 in quantum computing, and 33 in quantum information science–with a significant overlap between subfields–which are all discussed in their relevance for the respective subfield. We compared the subfields regarding their interrelationship and distinctiveness in terms of their most influential papers and were able to deduce a common core set of five seminal publications in all four subfields.

Research shows active learning is an effective teaching method. However, few qualitative studies explore medical student perceptions of the active learning process. The present study explored what students thought about while completing paper puzzles, an active learning tool used at the University of Utah School of Medicine, to understand what and how medical students think while engaged in active learning.To investigate second-year medical students' attitudes toward these active learning exercises, three Zoom-based focused groups were held and recorded throughout the course. Recordings were transcribed and coded using thematic analysis.Students reported that peer interactions were of high value, and that while some interactions and thought processes were action-oriented, others were more metacognitive. Other benefits of the activity included promotion of learning, provision of structure, and designation of high-yield concepts. Challenges included feelings of confusion, problems with timing or difficulty of the tasks, and low utility without adequate preparation.These findings reflect student-acknowledged pros and cons of active learning described in education literature and add further insight into the thoughts and conversations students have during active learning activities. These include practicing metacognitive skills, triaging information, and learning from peers.These data further elucidate student perceptions of active learning activities in medical education. Though focused on a specific activity, the data can help medical educators understand what students appreciate about active learning and what they think about while engaged in such activities.The online version contains supplementary material available at 10.1007/s40670-022-01682-y.

Traditionally, data has been held in silos and was rarely shared with other organizations. However, recently data sharing across organizations is becoming more and more important as evidenced by governmental and industrial initiatives such as the EU data strategy. As a result, both academia and industry have been proposing new systems for shared databases, that allow multiple organizations to collaboratively insert and manage data in a common database. Yet, each new system seems to come with its own architectural choices and custom guarantees that make it hard for users to navigate the plethora of shared database systems. While standard benchmarks like the TPC‑C database benchmark have been a well-established tool to compare and analyze traditional database systems, they seem to be unsuited to evaluate shared database systems. This is because these systems are built with fundamentally different assumptions in mind, such as a different threat/trust model since multiple (untrusted) parties access and modify the same data. In this paper, we present a vision and initial ideas for a new benchmark to evaluate shared databases and capture their unique characteristics.

Purpose The COVID-19 pandemic has been a dramatic trigger that has challenged the intrinsic capacity of older adults and of society. Due to the consequences for the older population worldwide, the Special Interest Group on Comprehensive Geriatric Assessment (CGA) of the European Geriatric Medicine Society (EuGMS) took the initiative of collecting evidence on the usefulness of the CGA-based multidimensional approach to older people during the COVID-19 pandemic. Methods A narrative review of the most relevant articles published between January 2020 and November 2022 that focused on the multidimensional assessment of older adults during the COVID-19 pandemic. Results Current evidence supports the critical role of the multidimensional approach to identify older adults hospitalized with COVID-19 at higher risk of longer hospitalization, functional decline, and short-term mortality. This approach appears to also be pivotal for the adequate stratification and management of the post-COVID condition as well as for the adoption of preventive measures (e.g., vaccinations, healthy lifestyle) among non-infected individuals. Conclusion Collecting information on multiple health domains (e.g., functional, cognitive, nutritional, social status, mobility, comorbidities, and polypharmacy) provides a better understanding of the intrinsic capacities and resilience of older adults affected by SARS-CoV-2 infection. The EuGMS SIG on CGA endorses the adoption of the multidimensional approach to guide the clinical management of older adults during the COVID-19 pandemic.

The prevalence of diabetes has increased over the past years. Therefore, developing minimally invasive, user-friendly and cost-effective glucose biosensors is necessary especially in low-income and developing countries. Cellulose paper-based analytical devices have attracted the attention of many researchers due to affordability, not requiring trained personnel, and complex equipment. This paper describes a microfluidic paper-based analytical device for the detection of glucose in tear with the naked eye. The paper-based biosensor fabricated by laser CO2, and GOx/HRP enzymatic solution coupled with TMB was utilized as reagents. A sample volume of 10 µl was needed for the biosensor operation and the results were observable within 5 minutes. To evaluate the device performance, color intensity-based and distance-based results were analyzed by ImageJ and Tracker. Distance-based results showed a linear behavior in the range of 0.1–0.6 mM with an R2 = 0.967 and LOD of 0.2 mM. The results could be perceived by the naked eye without any need to further equipment or trained personnel in a relatively short time (3–5 minutes). Moreover, glucose concentration could be obtained non-invasively by tears collected by this µPAD.