Search

WOS:000967659000009 The utilization of plant extraction products from Oeneanthe pimpinelloides (Apiaceae family) seeds were investigated in terms of their use as an insecticide control of packaging materials. The aim was to investigate their insecticidal effects against the flour beetle Tribolium castaneum. The Oeneanthe pimpinelloides seeds were extracted with methanol. By using the liquid-liquid extraction method, the hexane extract (II) was separated from the methanol extract (I) and hexane and methanol were evaporated. Then, the chemical composition of each sample was determined via gas chromatography–mass spectrometry. The methanol extract predominantly contained tetrahydrofuran, 1-methoxy-2-propanol, 1-methoxy, 2-butoxyethanol, 1-phenylethanone, cyclohexene carboxylate derivative, (3-phenyl-2-propynylidene) cyclopropane, diphenyldiazene, and dihydroxypropyl ester components, while the hexane fraction contained nonane, 1-octanol, decane, undecane, tridecane, alkyl benzene, benzene sulfonic acid, benzoxazine, and hexadecanoic acid components, as well as some derivatives of them. Each fraction was dissolved in DMSO for impregnation on filter paper. The insecticide effects of the paper samples were determined against Tribolium castneum. According to the results, the mortality started after 3 d for each fraction. After 4 d, the hexane fraction indicated total mortality in comparison with the methanol fraction, which showed partial mortality (3/5).

From the end of the nineteenth century and one hundred years onward, home sewing was an important part of many women’s duties, but it was also a pleasure, something that existed parallel with the emerging mass-produced ready-to-wear industry. The paper patterns used for home dressmaking were often sold and distributed through women’s magazines. These pattern sections were both a kind of reader service and a conscious strategy to capture the female target group. This article, based on an analysis of three Swedish magazines, is the first in-depth survey of patterns for home sewing of women’s clothes in Sweden. The study shows how the magazines adapted to changes in society with increasingly easier patterns and ready-cut fabric for their readers. By highlighting women making their clothes in the home, this article contributes to an often-neglected area of women’s memory and fashion history.

Foam-assisted web forming and chemical application technologies have great potential to improve manufacturing efficiency and product quality in the paper and nonwovens industries. In this study, the benefits of foam forming and foam-assisted application of chemicals were demonstrated in a pilot machine trial. Uniform high-bulk webs of unrefined bleached softwood kraft pulp (BSKP) and viscose fibers were manufactured by foam forming. It was shown that foam formed low-grammage and high-bulk viscose fiber webs can be strengthened by foam-assisted application of latex onto the wet web. Correspondingly, foam-assisted application of carboxymethyl cellulose (CMC) and anionic polyacrylamide (A-PAM) improved the strength of the foam formed low-grammage and high-bulk BSKP web. Overall, the pilot machine results indicated that material cost savings could be achieved and a high-performance product could be manufactured with foam-based technologies.

Purpose: The aim of this research work is to analyze and compare profitability performance of selected paper companies in India. Approach/Methodology/Design: An analytical study method is employed in this research work by relying on secondary data. In this research work 12 paper companies are selected as a sample based on their higher net sales and the study period are last10 financial years from 2012-13 to 2021-22. Ratio Analysis is used as an accounting tool in which six profitability ratios are employed. One-way ANOVA technique of parametric test is used as a statistical tool to identify the difference among sample means. Findings: The major finding of the research work indicates that in all the selected paper companies the profitability performance of shows fluctuating trend during the study period of 10 years. The overall performance was good and satisfactory in Satia Industries Ltd., JK paper Ltd., Seshasayee Paper and Board Ltd. and NR Agarwal Industries Ltd. and it was low and dissatisfactory in Orient Paper & Industries Ltd. and Astron Paper & Board Mill Ltd. for all the selected profitability ratio during the study period. The results of statistical test revealed that in gross profit ratio, operating profit ratio and return on assets ratio formulated null hypotheses are rejected and in net profit ratio, return on net worth ratio and return on capital employed ratio formulated null hypotheses are accepted. Originality/value: In this research work profitability analysis is carried out which is helpful to know the profitability performance of selected paper companies. The result would help investors to make right choice of investment in selected companies. It would also identify that how efficiently a business can generates profit and value for its shareholders from its sales or operations, shareholders' fund or balance sheet’s assets.

Currently, tissue product producers try to meet consumers’ requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency.

The object of research in this scientific paper is the treatment of waste generated by paper production in industrial landfills. In the part of the paper production process, i.e. in its subsystem for wastewater treatment, a significant amount of solid waste is generated, which ends up in industrial landfills. The reason for the impossibility of returning to the production process lies in the fact that the sludge contains larger amounts of moisture and present chemical components that are isolated in the paper production process or during wastewater treatment. In the experimental part of the paper, a “trial plot” was selected on which seedlings of the paulownia elongate plant were planted in the waste sludge. The process of plant growth was monitored for two years and bioremediation, i.e. transfer of elements from sediments to plants, was analysed by modern instrumental methods. Based on the results obtained by research, it can be said with certainty that Paulownia elongate can be used in bioremediation of areas where these sediments are deposited.

In an article to study the effect of sizing agent and filler on the structural features of paper from the cellulose mass of the inner layer of the bark of mulberry tree branches, mechanical strength, absorbency and sorption properties were studied. Tensile strength was determined on a tensile testing machine by the force causing the destruction of the sample. Surface absorbency at one side wetting was determined by the method of Cobb(30), by determining the mass of water absorbed by the surface of the paper when wetting one side of the test sample. Sorption properties were studied on a high-vacuum setup with mercury gates and McBain quartz balances according to water vapor sorption data. It was found that the internal 2% sizing of the paper pulp with cherry tree resin glue contributes to the strengthening of the paper structure, which is confirmed by the values of mechanical strength and surface absorbency when unilaterally wetted with water, relative to the values obtained when sizing with pine oleoresin rosin glue. When using glue from cherry resin, it is advisable to add 2 g of kaolin to 100 g of pulp from the inner layer of the bark of mulberry tree branches, since the increase negatively affects mechanical strength and hydrophobicity., В статье для исследования влияния проклеивающего вещества и наполнителя на структурные особенности бумаги из целлюлозной массы внутреннего слоя коры веток тутового дерева изучены механическая прочность, впитывающая способность и сорбционные свойства. Прочность на разрыв при растяжении определяли на разрывной машине по усилию, вызывающему разрушение образца. Поверхностную впитываемость при одностороннем смачивании определяли по методу Кобб(30), путем определения массы воды, поглощенной поверхностью бумаги при смачивании одной стороны испытуемого образца. Сорбционные свойства исследовали на высоковакуумной установке с ртутными затворами и кварцевыми весами Мак-Бена по данным сорбции паров воды. Выявлено, что внутренняя 2%-ная проклейка бумажной массы клеем из живицы черешневого дерева способствует упрочнению структуры бумаги, что подтверждается значениями механической прочности и поверхностной впитываемостью при одностороннем смачивании водой, относительно значений, полученных при проклейке канифольным клеем из сосновой живицы. При использовании клея из живицы черешневого дерева целесообразно к 100 г целлюлозной массы из внутреннего слоя коры веток тутового дерева добавлять каолин в количестве 2 г, так как увеличение отрицательно влияет на механическую прочность и гидрофобность.

Lead (Pb) pollution from local mines and industrial use increases risks for human, animal, and plant health. Pectin is an effective chelator of Pb, and it has been shown that a unicellular green alga, Penium margaritaceum, synthesizes pectin in the cell wall. In this study, the ability of P. margaritaceum to remove Pb from an aqueous solution was investigated. Energy dispersive X-ray spectroscopy revealed that two strains of P. margaritaceum accumulated Pb on the cell surface. Hence, P. margaritaceum cells were immobilized on cellulose filter paper. The immobilized algal cells were soaked in 1.0 mg/L Pb solution with gentle shaking for 8 h, and Pb in the solution and on the filter paper was measured by flame atomic absorption spectrometry. The immobilized algal cells continuously decreased the Pb concentration to less than 0.5 mg/L and recovered 31.8–32.7% of added Pb. The specific decrease in Pb and increase in Ca were observed in the presence of 1.0 mg/L each of Ca, Mg, Na, and K. Fourier transform infrared spectra suggested that the carboxylic acid group would be responsible for the adsorption of Pb. This study is the first to demonstrate the effectiveness of the immobilized P. margaritaceum cell in removing Pb from aqueous solutions with simple solid–liquid separation.

Four organic solid wastes (coffee grounds, ground nut shell, paper money sewage sludge and cork powder) have been investigated as bloating inducing agents in lightweight aggregate (LWA) manufacturing when mixed in small proportions (2.5 wt.%) with three types of clays. The pellets obtained were fired in a rotary kiln at the maximum feasible temperature for 4 min. A similar impact was observed both in the working conditions and in the properties of the LWAs, showing that the differences between said residues are not as decisive as those of the clays to which they are added. The organic wastes have played a crucial role in achieving reducing conditions inside the aggregate. Thus, their addition has led to substantial improvements both from an operational point of view, lowering the working temperature, and from a technological perspective, favoring bloating and the development of a highly porous and lightweight structure. Leachate studies have shown that the LWAs meet the regulatory limits. The outcomes of this investigation show that, in line with the precepts of the Circular Economy, the recovery of organic wastes of different nature can have a place in the production of environmentally friendly LWAs

Today, legal regulations, along with social awareness, have made waste management a necessity. Depending on the type of waste, technological developments have enabled an increase in the number of approaches, e.g., reusing, recycling, and manufacturing of different products. In this study, low-density boards were produced using different proportions of office waste paper, wood chips, and chopped E-glass fiber. Waste paper and glass fiber formed the middle layer of the boards and wood chips comprised the surface layers. The density, water absorption, and thickness swelling properties of the boards were investigated. Among the mechanical properties, the modulus of rupture, modulus of elasticity, and internal bond strength were determined. The use of wastepaper led to a reduction in the modulus of rupture and modulus of elasticity of the boards. An increase in the glass fiber ratio contributed positively to the water absorption and thickness swelling properties, whereas it directly led to decreases in the internal bond strength, and the modulus of rupture and modulus of elasticity values. Nonetheless, the low-density boards were able to meet the minimum modulus of rupture and modulus of elasticity specified in ANSI 208.1 standards, while only one variation met the IB requirements., U današnje je vrijeme zakonska regulativa, uz društvenu svijest, gospodarenje otpadom učinila nužnošću. Ovisno o vrsti otpada, tehnološki je razvoj omogućio povećanje broja pristupa gospodarenju otpadom, npr. pri ponovnoj uporabi, recikliranju i proizvodnji različitih proizvoda. Za ovo su istraživanje izrađene ploče niske gustoće s različitim udjelima otpadnoga uredskog papira, drvnog iverja i usitnjenih staklenih vlakana. Pritom su otpadni papir i usitnjena staklena vlakna iskorišteni za izradu središnjeg sloja, a drvno je iverje upotrijebljeno za vanjske slojeve ploča. Izrađene su ploče ispitane i utvrđena je njihova gustoća, moć upijanja vode i debljinsko bubrenje. Dodatno su određeni modul loma, modul elastičnosti i čvrstoća raslojavanja. Rezultati ispitivanja pokazali su da je uporaba otpadnog papira pridonijela smanjenju vrijednosti modula loma i modula elastičnosti. Istodobno je povećanje udjela usitnjenih staklenih vlakana imalo pozitivan učinak na vrijednosti upijanja vode i na debljinsko bubrenje, ali je izravno utjecalo i na smanjenje čvrstoće raslojavanja, modula loma i modula elastičnosti. Ipak, izrađene ploče niske gustoće zadovoljile su minimalne zahtjeve norme ANSI 208.1 glede modula loma i modula elastičnosti, a samo je jedna skupina eksperimentalno izrađenih ploča zadovoljila uvjete čvrstoće raslojavanja.

This study looked at how using small or large pieces of Rice Husk Ash and Waste Paper Sludge Ash can affect how strong and how much the concrete shrinks when it dries. When Rice Husk Ash (RHA) and Waste Paper Sludge Ash (WPSA) were added to concrete, more water was needed. However, the mechanical properties of the concrete were similar or better than the concrete made with just Ordinary Portland Cement (OPC). Finer RHA and WPSA gave the best improvements. Rice husk and waste paper ash made things shrink a lot because of tiny particles that cause it to happen. This research looked at using waste paper sludge ash instead of some of the cement in a kind of concrete called M20 mix. They tested different amounts of the ash (0%, 5%, 10%, 15%, 20%, and 25%) to see how strong it made the concrete. They tested the strength of the concrete up to 28 days after it was made and compared it to normal concrete. Waste paper sludge can be used as fuel because it has a lot of heat energy. Afterwards, the remaining ash can be used to replace some of the cement.

This work was developed within the scope of project i3N (LA/P/0037/2020. I.P. N. F. Santos thanks i3N for the BPD Grant BPD/UI96/5177/2020. S. O. Pereira thanks i3N for the BPD Grant BPD/UI96/5808/2017. The authors also thank Jonas Deuermeier for the XPS measurements. Publisher Copyright: © 2022 Elsevier Ltd Laser-induced graphene from paper (paper-LIG) was applied in non-enzymatic electrochemical sensing of uric acid (UA) in human urine. Paper-LIG was formed by CO2 laser modification of paper into a 3D graphene arrangement. Kinetic analysis of paper-LIG electrodes returned effective heterogeneous electron transfer standard rate constants of 1.4 × 10−3 cm s−1 and 7.8 × 10−4 cm s−1 for [Ru(NH3)6]2+/3+ and [Fe(CN)6]4−/3− redox probes, respectively. These electrodes were able to detect and quantify uric acid in PBS within the 10–300 μM range at pH between 5.6 and 7.4. At pH 7.4, a linear response (R2 = 0.999) from 10 to 250 μM was achieved, with a limit of detection of 3.97 μM and a sensitivity of 0.363 μA cm−2 μM−1. Paper-LIG electrodes denoted adequate selectivity in synthetic urine as well as in ascorbic acid (AA) and dopamine (DA)-containing electrolytes. Determination of urinary UA content in human samples returned a concentration of c.a. 1.8–1.9 mM, within the range for healthy individuals. Recoveries of samples spiked with 50 and 100 μM UA were 100.6% and 95.4%, respectively, with satisfactory reproducibility and stability. These cheap, lightweight, flexible, and eco-friendly paper-LIG biosensors for non-enzymatic quantification of UA in human urine pave the way to widespread application in the detection of other important biomarkers. publishersversion published

Businesses, which provide the production and mediation of goods and services needed by the society, are organizations that have goals such as growth, development, making profit, establishing a sustainable structure, and realizing social responsibility projects. It is important for businesses to have a financially strong structure in order to achieve their goals. In order to establish a sustainable financial structure, analyzes are carried out with various methods using the historical data of the enterprises and future decisions are taken with these analysis outputs. One of the financial sustainability measures for businesses is performance measurement. In many academic studies in the literature, it is observed that Multi-Criteria Decision Making (MCDM) methods are used for financial performance measurement. With MCDM methods, companies are compared financially within themselves, by years and with the sector. This study was carried out to measure the financial performance of businesses operating in the BIST Paper and Paper Products Printing Sector. As a sample, the data of 9 companies operating in the BIST Paper and Paper Products Printing Sector were used. The financial ratios of the enterprises for the years 2016-2021 were obtained and the analysis was carried out with COPRAS and MOORA, which are MCDM methods. Using two analysis methods provides the opportunity to evaluate financial performance rankings from different perspectives. As a result of the study, the financial performance rankings of 9 companies in the sector were evaluated according to both methods.

Paper is one of the most common wastes produced by humans, this paper waste is often found in household activities as well as offices and schools. Processing recycling of paper can add many advantages including being able to reduce waste in the environment, save energy, reduce the impact of global warming and can also generate income. This recycled paper can also be used to make various handicraft products that can be made by people who have creative values and an artistic spirit. The works of this recycled paper can be used as home decoration knick-knacks, stationery and office equipment, You can also make unique and creative multi-purpose containers that housewives can be interested in. Apart from that, they can be used for materials for student craft assignments as well as school students. Paper waste management certainly requires more attention, this can be overcome by efforts to reduce it by converting paper waste into recycled paper which has a selling value and is useful.

Microfibrillated cellulose (MFC) was prepared from post-consumer old corrugated container (OCC) material, which was first disintegrated in water, cleaned to remove impurities, and then fibrillated by grinding. Those processed MFCs were treated with in-situ formation of calcium carbonate by adding calcium oxide and injecting carbon dioxide into the mixture up to the ratio of 1:40 (MFC : calcium carbonate) by weight. The MFCs had a dark brown color initially but turned into high brightness materials similar to commercial ground calcium carbonate (GCC) after the in-situ formation process. The MFCs that had calcium carbonate attached on their surfaces, which were lengthy and flexible, were called flexible calcium carbonate from OCC (FCCO). Paper containing FCCO gave higher bulk, higher stiffness, and higher tensile index without lowering smoothness when compared to the paper containing commercial GCC. However, brightness was slightly lowered because of initial low brightness of the OCC. This study also demonstrated the feasibility to substitute wood fibers up to 5% with FCCO without lowering essential properties for printing paper. Benefits of the waste paper are savings of both wood resources and production cost.

In the research of the review of this creative and innovation area that can benefit community and nation. The review that had been picked in this research was the paper. The aim of this review is to explain about the advantages or the benefits of paper and also the used of the paper, also the improvement of the nation by the helps of the paper production and innovation. The methods that we going to describe in this review was the involvement of the paper production in many fields, such as for individuals, schools, medical centre and so on. There are a lot of information and new knowledges that we going to present and cite in this review. The conclusion of this article review was to be making sure that everyone knows the important and the properties of the paper in our country.

Paper, which is in fact a very complex cellulose-based product derived from different lignocellulosic resources, is usually regarded as a simple omnipresent commodity in our lives. Wood fibers derived from trees are the most employed sources for papermaking purposes. From an environmental protection perspective, and for their essential role in our life (they give us the life itself through their foliar system supporting the photosynthesis process), trees should not be extensively cut down and they should be used less and less for papermaking. Thus, employment of non-woody alternative sources for papermaking could be exploited more as an attractive and feasible option.

The current data on climate change and environmental degradation are dramatic. The consequences of these changes are already having a significant impact on people's health. Physicians - as advocates of the patients, but also as citizens - have an ethical obligation to be involved in efforts to stop these changes. The European Federation of Internal Medicine (EFIM) strongly encourages the Internal Medicine societies and internists across Europe to play an active role in matters related to climate change and environmental degradation. At a national level, this includes advocating the adoption of measures that reduce greenhouse gas (GHG) emissions and environmental degradation and contributing to policy decisions related to these issues. At a hospital level and in clinical practice, supporting actions by the health sector to reduce its ecological footprint is vital. At the level of EFIM and its associated internal societies, promoting educational activities and developing a toolkit to prepare internists to better care for citizens who suffer from the consequences of climate change. In addition to advocating and implementing effective actions to reduce the ecological footprint of the health industry, recommending the introduction of these themes in scientific programs of Internal Medicine meetings and congresses and the pre- and postgraduate medical training. At a personal level, internists must be active agents in advocating sustainable practices for the environment, increasing the awareness of the community about the health risks of climate change and environmental degradation, and being role models in the adoption of environmentally friendly behaviour.

The main thing of Artificial intelligence (AI) is the consummation of natural dialogue between humans and machines. There are numerous IT companies have used the dialogue systems technology to establish various kinds of Virtual assistants grounded on their operations and areas for adding commerce between mortal and machine, similar as Microsoft’s Cortana, Apple’s Siri, Amazon Alexa, Google Assistant. Like Microsoft Cortana we've created our own virtual desktop assistant only for Government College Of Engineering Chandrapur (GCOEC) using python which is suitable to run on any windows operating systems. We use python as a programming language because it has a multitude of libraries which can be used to create Artificial Intelligence. Our version of desktop assistant is capable of recognizing voice and voice commands. Desktop Assistant are programs on digital device like PC that hear and respond to verbal commands. Example, a user can say, “Open GCOEC Website” and the assistant will answer with the sanctioned website of GCOEC. Desktop Assistants can change the way of life of the people in a different manner. Bias is starting to build up in the community as AI’s are getting smarter in their own way to interact with humans in an easy language. The Desktop Assistant is a program that can fete mortal voices and can respond via integrated voice system. This paper will define the working of Desktop assistant, their main problems and limitations. In this paper it's described that the system of creating a Desktop assistant without using pall services, which will allow the expansion of similar bias in the future

Artificial intelligence (AI) has revolutionized various industries, and its impact on the job market is significant. While AI has the potential to automate repetitive and time-consuming tasks, it also presents new job opportunities that require expertise in data analysis, software engineering, and machine learning. The paper provides an overview of the current state of the job market and the challenges it faces, and explains how AI is transforming the job market, including its impact on job creation and destruction, skill requirements, and wage distribution. The paper analyzes the job market trends from 2019 to 2023 based on the latest research and reports, and discusses the implications of AI for the workforce and policymakers. The paper concludes with some recommendations for future research and policy interventions. It discusses the benefits of AI, such as increased productivity, efficiency, and accuracy, and highlights the challenges that AI poses, including the displacement of certain jobs and the need for retraining workers. The review paper also discusses how AI is impacting workplace safety and health, including both the potential benefits and the new hazards that AI presents. Finally, the review paper explores the policies and regulations needed to ensure that AI is used ethically and responsibly in the job market. Overall, this review paper aims to provide a comprehensive understanding of the impact of AI on the job market and its implications for workers, businesses, and society

Human-Computer Interaction (HCI) plays a crucial role in shaping our digital experiences, with professionals at the forefront of designing and developing interactive systems. This review paper examines the professional issues within HCI, aiming to identify key challenges, trends, and advancements in the field. Through an extensive analysis of existing literature, this paper explores various dimensions of professional issues in HCI, including ethical considerations, user-centered design practices, socio-cultural implications, legal aspects, and the impact of emerging technologies on HCI professionals. By synthesizing research findings and critical insights, this review highlights the importance of addressing these issues for the advancement of HCI. Furthermore, it presents a comprehensive overview of the current state of research, identifies gaps and limitations, and proposes future directions for research and practice in order to foster a more ethical, inclusive, and effective human-computer interaction domain. This review contributes to the understanding of professional challenges faced by HCI practitioners and provides a foundation for informed discussions and developments in this dynamic field.

Paper and garden waste is one of the types of waste that can be found in big cities in Indonesia, one of which is Depok City. Garbage collectors can recycle not all paper waste into new products. In addition, garden waste is also garbage, one of the wastes found produced every day from gardening activities. This study aimed to analyze the potential for reducing the use of paper and garden waste to be used as RDF in Depok City. This study analyzes the quality of RDF based on the parameters of water content, ash content, density, and calorific value resulting from the material substitution. The results were analyzed using the multicollinearity method and the Kepner-Tregoe Decision Analysis (KTDA). The results of the multicollinearity test show that the ash content and water content can reduce the calorific value of RDF mixed with paper and garden waste. The addition of garden waste composition can increase the calorific value. Based on the results of decision analysis using KTDA, it shows that the variation of the mixture of 75% paper waste and 25% wood waste has the largest points compared to other variations. Material Flow Analysis (MFA) utilization of this waste can reduce the generation of paper waste and garden waste by 3.5% and 12.3%, respectively.

The migration of photoinitiators (PIs): benzophenone (BP), ethyl 4-dimethylaminobenzoate (EDAB), and 4-chlorobenzophenone (CBP), from polyethylene (PE)-coated paper to 4% (v/v) acetic acid and 10% (v/v) salt-simulated food solution was quantitatively analyzed using gas chromatography–mass spectrometry. The migration behavior of the three PIs was studied under three specific working conditions: conventional heating, microwave power, and random vibration level. The migration rate of the three PIs in acidic food simulants was ranked from BP > EDAB > CBP under the specific working conditions. The mobility of the three PIs increased with increasing temperature, microwave power, and random vibration acceleration in 4% (v/v) acetic acid by 10, 10, and 15%, respectively. The experimental migration data of three PIs in PE-coated paper under different temperatures and microwave powers were used to establish the Crank monolayer migration model according to Fick’s second law. The diffusion coefficient D increased with an increase in experimental conditions. According to the migration data under the condition of random vibration level, a mathematical model conforming to the Fick model was established, fitting the migration process. These results showed that conventional heating, microwave heating, and vibration could affect the food safety of PE-coated paper.

The use of templates and examples of papers separately is proven to be able to develop students' writing skills. The average degree of mastery that can be achieved is already in the good category. Using various learning facilities can be a solution to improve these achievements into a very good category. This study aims to analyze the effectiveness of implementing templates and sample papers in developing students' writing skills in science courses. The pre-experimental research was conducted on elementary school teacher education study program students. Data on each student's scientific research paper writing skills were collected using the documentation method. This data was then analyzed descriptively. The descriptive analysis includes average and proportion measurements. Based on the results of data analysis, it was found that the average student's skills in writing papers were in a good category. Most students have very good (41.44%) and good (40.54%) categories of writing skills. 13 indicators have reached the very good category, one indicator is in a good category, and two indicators are in the sufficient category. The rests are one indicator still in the less category and four indicators in the less category. The conclusion that can be drawn from this research results is using examples and paper templates as effective learning facilities to improve students' writing skills.

The limited supply of wood as a raw material in various industries requires a better alternative material. Wasted-based composite engineering can be a solution to this problem. What's more, composite can be engineered according to needs, such as having the ability to reduce heat to maintain comfortable room temperature conditions. Therefore, in this research, a particle board reinforced by pineapple leaf fiber waste and HVS paper waste was developed to know the effect of the particle board reinforcement composition on reducing heat. In this research, a comparison of pineapple leaf fiber waste and HVS paper waste was used at 100%:0%; 70%:30%; 50%:50%; 30%:70%; and 0%:100% with resin adhesive. This particle board is made by mixing all the ingredients and then printing it into a mold and then carrying out the drying process. The test was carried out based on a temperature difference analysis. The most optimum particle board reinforcement composition to reduce heat is 100% pineapple leaf fiber waste : 0% HVS paper waste.

We develop a vision system for batch inspection by oven white paper model color by manufacturing a machine vision system for the oven manufacturing automation process. In the vision system, white paper object detection (spring), color clustering, and histogram extraction are performed. In addition, for the automated process of home appliances, we intend to develop an automatic mold combination detection algorithm that inspects the label position and direction (angle/coordinate) using deep learning.

This study addresses the barriers that hinder paper recycling and explores potential solutions to overcome these challenges. The barriers discussed include a lack of recycling infrastructure, inadequate education and outreach, cultural attitudes towards waste, and a lack of economic incentives. To address these barriers, governments and organizations can implement solutions such as expanding recycling infrastructure, improving education and outreach, addressing cultural attitudes through targeted messaging, and providing economic incentives. Successful implementations of these solutions in other locations or industries are also highlighted. The study emphasizes the importance of addressing these barriers to increase paper recycling rates and reduce the environmental and economic costs of low recycling rates.

Ning Gao,1,* Meng Li,2,* Weiming Wang,1 Lei Wang,3 Zhen Liu,4 Yufeng Guo1 1Department of Acupuncture and Moxibustion, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 2Department of Gastroenterology, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 3Department of Dermatology, China-Japan Friendship Hospital, Beijing, 100020, People’s Republic of China; 4Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, Beijing, 100091, People’s Republic of China*These authors contributed equally to this workCorrespondence: Zhen Liu, Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, No. 1 Xiyuan Playground, Haidian District, Beijing, People’s Republic of China, Email doctorliuzhen@126.com Yufeng Guo, Department of Acupuncture and Moxibustion, Guang’ an Men Hospital, China Academy of Chinese Medical Sciences, No. 5 Beixiange St., Xicheng District, Beijing, People’s Republic of China, Email gamgyf@139.comBackground: In recent years, the incidence of herpes zoster has risen steeply, the exact pathogenesis of the acute pain and the transformation into postherpetic neuralgia are still obscure, and the absence of effective management remains a major therapeutic challenge. The purpose of this study was to perform a qualitative and quantitative bibliometric analysis of the 100 most cited papers on herpes zoster.Materials and methods: Related literature were retrieved from the Web of Science Core Collection. Excel and VOSviewer software were applied to quantitatively analyze, and construct the bibliometric network charts.Results: The Top 100 most-cited papers published between 2000 and 2018 showed a fluctuating downward trend. The most studies were published in the year of 2000 (n = 12). The article entitled “A vaccine to prevent herpes zoster and postherpetic neuralgia in older adults” from Oxman MN, was the most-cited publication. The United States was the most contributing country, followed by the United Kingdom, and Italy. Finland occupied the highest citations per publication (CPP). The University of Colorado topped the list of institutions with the most publications with 18 articles and also had the most citations (average citations: 281.78 per article). Myron J Levin from the University of Colorado School of Medicine is the most published and most cited researcher overall, whereas Duke University’s John W Gnann tops the list in terms of average CPP.Conclusion: In terms of the quantity of T100 articles, researchers, and organizations, the US is the predominant country. The most T100 papers were published in the special journal Clinical Infectious Diseases. The most academic focus remain the remedies for postherpetic neuralgia and vaccine development for individualized groups.Keywords: herpes zoster, bibliometric study, top-cited, citation, VOSviewer

In any big institution,especially educational institutions like schoolsor colleges, generation of large quantity ofwaste papers is quite apparent. And effective use of recycled paper is also possible (craft papers, registers etc). So, instead of disposing off the waste papers into trash, recycling themmakes sense. This not only helps the institute in cost saving but will also ensure its contribution towards the protection of the environment. Designing automatically operated small-scaled paper recycling plant, which can be used in schools and colleges, ensures that a cheap and non-complex methodof production of paper product is guaranteed.Accordingly design of the machine unit has been prepared with all necessary component specifications.

The journal of appropriate technology has been published since the 2015. The major research topics for the journal of appropriate technology have been environment, mechanics, materials, chemical engineering, managing, chemistry, and medicine, etc. In this study, all the published papers of the journal of appropriate technology were analyzed based on the number of published papers and authors. The author’s affiliation was analyzed as university, research institute, and industry, etc. annually. The number of published papers according to the author also analyzed. Based on the bibliometric analysis, it is worth to mention that the trends of publications of the journal of appropriate technology could be identified.

Polyhydroxybutyrate (PHB) has the potential to replace traditional plastics and limit environmental pollution caused by plastic waste. This study combined wastewater treatment with PHB production to reduce costs. Bacteria capable of synthesizing PHB were isolated from paper mill wastewater and identified using Matrix Assisted Laser Desorption/Ionization–Time of Flight (MALDI-TOF) mass spectrometry and 16S rRNA gene analysis. Bacillus pumilus NMG5 strain was found to have a good yield in modified Nutrient Broth culture, reaching 42.28% of dry biomass. The PHB product was analyzed using FTIR spectroscopy and 1H NMR spectroscopy. The bacterial strain was also tested for its ability to treat paper mill wastewater, and it showed impressive results in terms of biochemical oxygen demand (COD), total nitrogen, and total phosphorus, with efficiencies of 95.93%, 79.36%, and 83.55%, respectively. The study found that wastewater treatment combined with PHB production was a promising solution to reduce costs and limit environmental pollution. The bacterial strain B. pumilus NMG5 had a high yield of PHB, and the PHB product was of high quality, as confirmed by FTIR and 1H NMR spectroscopy. Furthermore, the bacterial strain showed impressive results in treating paper mill wastewater with high COD, total nitrogen, and total phosphorus efficiencies. These results suggest that this harmless bacterium could be used in paper mill wastewater treatment systems to produce PHB, providing a sustainable and environmentally friendly solution.

Fetching recently published research papers is a time consuming and tedious process for young researchers and even for experts. In real time searching papers based on keywords and queries in search engines may not result apt or proper research papers that the user searched for. Because these research papers lack proper links and citations that help to find the most concerned papers. To overcome this problem a hybrid model is proposed with time constraint that combines the Text mining and Recommendation algorithm. The preference of papers and articles are jointly modeled with matrices sharing common dimensions of researchers and papers. The initial process starts with text mining algorithm that matches keywords with the data available in web pages. The post process consists of recommendation algorithms with latent matrix factorization and tensor matrix with similar preferences in a dimensional space. This paper explains the hybrid experimental model that helps users to fetch the most recent and relevant paper in a short period of time

Lecturers are required to produce scientific papers for improving their careers. However, there are many lecturers who do not understand how to write scientific papers and to publish it. This community service aims to improve the competence of lecturers in writing scientific papers so that they can make good scientific papers and can publish it. The program is carried out in two stages: 1) preparation stage, and 2) implementation through training on writing scientific paper. The results showed that the participants were able to understand 1) the basics of scientific writing, 2) the parts of scientific articles, 3) the scientific publication policies, 4) the criteria and requirements for publishing scientific papers in accredited journals, 5) the paraphrase techniques, 6) the citation using Mendeley, and 7) the technique of compiling according to the standard template of accredited journals.

Exams are getting digitized all over the world. Basically, meaning that the traditional paper-based tests are being replaced by the certain computer-based tests which have proven to be both more consistent in allocating marks and faster than teacher correcting papers. The traditional exams usually consisted of subjective answers which were not the best way of grading the student’s perception of the subject. Hence, we are developing a computer-based system that will generate MCQ based question that will be better suited to grade students academically. So, Incremental Question Paper Generator (IQPG) is an attempt at developing a software which can implement adaptive evaluation along with generation of questions on its own. The software aims to generate an increasingly difficult or easy in simpler words, it aims to generate a question paper which dynamically changes the difficulty of its questions. Along the same the software generates these questions by learning from a pre-made dataset of questions.

This study investigates the emotional experiences of undergraduate students when taking computer-based compared to traditional paper-based exams. The authors surveyed 144 students and conducted in-depth written interviews with 44 of them to gain a comprehensive understanding of their emotions and experiences. The findings revealed that students generally feel more positive emotions, such as enjoyment, hope, and pride during computer-based exams. Conversely, they experienced less anger, anxiety, and hopelessness compared to paper-based exams. However, they observed no significant differences in feelings of relief and shame between the two exam modes. The interview responses provided valuable insights into the reasons behind these emotions. Students found computer-based testing to be more efficient, user-friendly for language editing, and appreciated the auto-grading features. However, technical concerns were identified as a major challenge in this format. On the other hand, paper-based exams allowed students to avoid technical problems, draft their answers, and express ideas more effectively. Despite these advantages, students reported disliking the lengthiness of the written responses, the difficulty of editing, and the pressure of maintaining legible handwriting. Overall, this study sheds light on the emotional experiences of students in different exam formats, helping educators make informed decisions to optimize testing environments.

A surface profilometry technique was used to characterize the surfaces of paper products. A stylus-contact type profilometer capable of simultaneously generating both surface roughness- and friction-profiles was used. As a stylus for the profilometer, a conical shape whose tip was rounded to have a 0.5 mm curvature radius was designed and successfully employed in both printing & writing (P&W) papers and hygiene papers such as bathroom tissues and kitchen towel. From the profiles, the mean absolute deviation (MAD) from the averages, i.e., R-MAD from the roughness average and F-MAD from the average coefficient of friction, were suggested as the new surface characterization parameters. To elucidate the surface roughness profiles by fractal dimension analysis, the variogram method was applied to get the fractal dimensions of the paper products. Generally, the value of the fractal dimension increased as the surface roughness increased. The surface profilometry technique with the fractal dimension analysis with the variogram method looks promising to gain additional insight on the surface characteristics of paper products.

In the research, the electrooxidation method of the electrochemical treatment methods in thebatch system was explored a variety of experimental conditions for the treatment of wastewater from thepaper sector. 4 anodes and 4 cathodes sieve type plates with dimensions of 7 cm x 10 cm were positionedat 0,5 cm intervals in the 2000 mL volume jacketed glass reactor used for the treatment of wastewater fromthe paper industry, and 1200 mL wastewater was used in the testing. 4 coated Ti/IrO2/RuO2 electrodes ofthe sieve type were used as the anode material and 4 uncoated Ti electrodes of the sieve type were utilizedas the cathode material in the electrooxidation of effluent from the paper industry. In the experiments, theremoval rate of the COD (Chemical Oxygen Demand) pollutant parameter; The effects of supportingelectrolyte types and concentrations such as KCl, NaCl, NaNO3, and Na2SO4, and parameters such as initialpH value and current density of wastewater without supporting electrolyte were investigated. According tothe results obtained; In the experiments conducted at the natural pH value of wastewater, 18.55 mA/cm2was the most effective current density, 0.50 M NaCl was the most effective supporting electrolyte type andconcentration. The COD removal rate at the best conditions (37.11 mA/cm2current density) was 90.62%.In optimum conditions; 73.20% COD removal efficiency has been achieved.

Information and communication technology (ICT) is becoming common in various industries, including education. Technology enhances teaching and learning. It aids instructors to do their part as pedagogical environment designers. ICT enables teachers to make their lessons engaging and understandable for students at all levels of educational programs. ICT integration in education is a technologically oriented teaching and learning process that is closely related to the usage of ICT as educational instruments in classrooms. Baze University fully utilizes ICT for both teaching and learning. In addition, the students of the Department of computer science at Baze University are been thoroughly exposed to the theoretical and practical applications of programming languages and constructs. Although anecdotal evidence and some published data suggest that paper-based exams are still frequently utilized in introductory computer programming and design courses, students frequently express a preference for computer-based exams. At Baze University, students are been examined using the pen-and-paper examination method throughout their study. The research approach was centered on a quantitative research methodology, utilizing focus group sessions for data collection to acquire data from 200 – 300 level students. The purpose of the research is to determine the satisfactory level of students that are been assessed using pen-and-paper exam methods for programming, database, and system design courses at Baze University. The findings of the research show that Baze University students would generally prefer a computer-based exam approach for programming, and database management courses.

It is crucial to advance network education exam informatization and mobile learning. One of them is the creation of a database system for exams, which contains crucial information. This study aims to analyze and solves key technologies including constraint check paper forming algorithms. This study using fuzzy query methods and spatial queries design a single exam table structure and exam papers for the exam database. The process of this study including collect and sort the complete set of GIS exams at major universities across the country, design a variety of GIS single questions, and build an exam database system. The result of this research is a personalized random paper formation system and query and spatial analysis by college and area for exam papers for the first time. It describes rich functions and stable performance by testing. The built system becomes an indispensable technical support instead of paper-based exams for information exams and scientific exams of many colleges and universities.

The key technology with fast development speed, virtual computer reality belongs to a kind of data-based fluid mechanics from the aspect of the working medium. From the perspective of fluid mechanics, this paper develops an application system of fluid mechanics based on virtual computer reality in pulp and paper engineering. The structure and characteristics of pulp and paper clarify the development direction of computational fluid mechanics in pulp and paper. Based on the application of the developed system in pulp and paper making, this paper analyzes and optimizes its structure to provide a scientific reference for the development and application of computer virtual reality fluid mechanics in pulp and paper making.

In an earlier publication (Van Wee & Banister, 2016), we explained that literature review papers (LRP) should explicitly report on the search and selection process of documents included. In this paper, we present two approaches for reporting the methodology for doing this: a basic approach and a reasoned approach. The basic approach includes reporting databases(s), keywords, search strings, snowballing, the selection of documents, presenting an overview of documents included and reporting additional selection criteria (if applicable). The reasoned approach adds to the basic approach (what was done) by explicitly explaining the motivation for choices and showing the selection process graphically (why it was done). The two approaches should be seen as options, and not the only alternatives. We recommend that authors of LRPs depart from these approaches and modify them where appropriate. The important lesson is that authors should be explicit about the approach adopted, as this enables the reader to understand the thinking behind the LRP and the conclusions drawn.

The college entrance examination system is undergoing constant reform and improvement. In 2021, the new college entrance examination system will be implemented, which will no longer distinguish between arts and sciences. This is a challenge for the proposition of math questions in the college entrance examination. Taking the 2018-2020 National examination paper (science) and 2021 National new high examination paper, a total of 11 mathematics advanced examination questions as the research object, using comparative research method, case study method, statistical analysis method and other research methods, mainly studied the examination content and investigation requirements of the examination paper. Based on the above research, the paper structure, the content of the paper, the core quality of mathematics and the similarities and differences of investigation requirements are obtained, and the proposition of the new college entrance examination mathematics and teachers are put forward.

This paper presents the development of a web application, which aims to provide a platform for white paper authors to upload and have their documents reviewed by industry experts and scholars. The web app will utilize Ethereum block chain technology to provide security and authenticity to the uploaded white papers, which will be converted into non-fungible tokens to ensure their uniqueness. The authors will have the ability to self-upload their white papers onto a secured IPFS (Inter Planetary File System) database and use ERC721 (Ethereum Request for Comments) protocols to mint them as non-fungible tokens. In addition, the web app will allow white paper authors to receive crowdfunded support from users holding ETH in their web3 wallets. With our unique authentication system utilizing decentralized techniques, the Paper Publication Portal ensures that only verified authors can publish their work, enhancing both the security and credibility of the platform.

“Agriculture provides employment opportunities for village people on large scale in developing country like India. Most of Indian farmers are adopting manual cultivation due to lagging of technical knowledge. In addition that, Plant leaf disease has been one of the major threats to for plants since long ago because it reduces the crop yield and compromises. plant diseases are studied in the literature, mostly focusing on the biological aspects. They make predictions according to the visible surface of plants and leaves. This paper presents a system that is used to classify and detect plant leaf diseases using machine learning techniques. In our work, we have taken specific types of plants; include tomatoes, pepper, and potatoes, as they are the most common types of plants in the world and in Iraq in particular. Using machine learning algorithms, which comprise procedures like dataset construction, loading images, prepping, segmentation, feature extraction, training a classifier, and classification, it is possible to classify plant diseases. This paper presents a Convolutional Neural Network (CNN) model algorithm based method for Agricultural leaf disease detection and classification. So, the neural networks can capture the colours and textures of lesions specific to respective diseases upon diagnosis

Termites were the most destroying wood organism and one of the methods for controlling termites and suppressing its population is the baiting system. One of the conditions in the baiting system method is that the bait must be able to attract termites. Mostly the attractant is made from an extract of the plant. This research aimed to evaluate the attractants of termites bait from waste paper and extract of basil leaf (Ocimum basilicum) against subterranean termites Coptotermes curvignathus Holmgren. Leaves of Ocimum basilicum extracted with maceration process with ethanol. After extraction, the yield was made into five concentration, consist of 2%, 4%, 6%, 8% and 10%. The waste paper was made into termite’s bait with a square bait with measure 2 cm long x 2 cm wide x 1 cm thick. The result of research showed that the average of termites mortality value was 18.79% - 97.58%. The highest termites mortality was achieve on 10% concentration of extract Ocimum basilicum. Its followed by the concentration 8% with mortality value 91.52%; concentration 6% with mortality value 78.18%; concentration 4% with mortality value 61.82% and concentration 2% with mortality value 51.52%. Meanwhile on control treatment the mortality value was 18.79%. The average of weight loss of termite’s bait was 3.41% - 8.36%. The highest weight loss was achieved on concentration 8% and this bait was more attractive to termites. Termite’s bait from waste paper and extract of Ocimum basilicum was attractant to subteranean termites Coptotermes curvignathus and the optimum concentration was 8%.

Introduction: Summative assessments play a major role in shaping the student’s learning. There is little literature available on validity of summative assessment question papers in Forensic Medicine & Toxicology. This study analyses 30 question papers from 6 reputed universities for content validity. Methods: A retrospective cross-sectional record-based observational study was conducted where 30 university summative question papers in Forensic Medicine & Toxicology from 6 universities across India were evaluated for content validity. The learning domain assessed, the type of questions asked, and sampling of the content was compared and presented in the results. Results: From the results of the study, it was noted that 80% weightage was allotted to recall in most papers and only one paper tested for application. 70 to 80% of the marks were allotted to Forensic Pathology leading to disproportionate sampling. Core areas in Toxicology and Medical Jurisprudence were sparsely assessed. Conclusion: The content validity of the summative question papers in Forensic Medicine and Toxicology was unsatisfactory, emphasising the need for evaluation of the clarity and efficacy of the blueprints being used by the universities. Faculty training to motivate and influence a change in the mindset is necessary to bring about a course correction.

As a type of Chinese folk art, jianzhi paper carving expresses not only people's spiritual life, but also their aspirations for a better life. Chinese paper carving art is filled with simple life wisdom and good wishes, and the figurative symbols contain unique artistic value and national traits. However, in today's multifaceted development, the traditional art of paper carving with a thousand years of history is gradually fading away. Traditional folk art represented by paper cutting has also begun to be introduced into new fields, not only in graphic design, but also in installation design of public spaces, showing its rich expressiveness and deep artistic value. This paper will examine the characteristics of traditional national paper carving, highlight cultural differences between Eastern and Western paper carving art, combine traditional folk art of paper carving with modern artistic expressions, analyse symbolic and emotional imagery and explore new ideas for the development and innovation of Chinese national art.