Search

In on-site measurement, as the transformer’s structure is often unknown, the application of frequency domain spectroscopy (FDS) is greatly limited in moisture assessment of transformer. This paper proposes a moisture assessment method for oil-immersed paper based on the dynamic characteristic frequency even for an unknown transformer structure. FDS tests are performed on the oil-paper insulation, corresponding oil-immersed paper, and mineral oil under different moisture conditions. The moisture criterion of oil-immersed paper and the influence of the structural parameters on the calculated frequency spectroscopy at different frequencies are discussed. It is concluded that the moisture criterion’s effectiveness, which indicates the sensitivity of assessed moisture content to the error of the tan $\delta $ , changes at different frequencies. Moreover, there are some frequencies at which tan $\delta $ is not influenced by structural parameters and is close to the measured value, which are regarded as “characteristic frequencies.” Based on the characteristic frequency, the moisture content of oil-immersed paper is assessed according to the frequency spectroscopy of oil-paper insulation without the structural parameters. The result shows that the assessing frequency changes under different moisture conditions, and the error of the assessed moisture content is less than 0.1%.

The existing plethora of document classification techniques exploits different data sources either from the content or metadata of research articles. Various journal publishers like Springer, Elsevier, IEEE, etc., do not provide open access to the content of research articles, whereas metadata is freely available there. Metadata like title, keyword, and abstract can serve as a better alternative to the content in various scenarios. In the current literature, researchers have assessed the role of some of the metadata individually. We believe that the collective contribution of metadata parameters can play a significant role in classifying research papers. This paper presents a comprehensive evaluation of the role of metadata, individually as well as in combinations to achieve the objective of research paper classification. Moreover, we have classified the research articles into ACM hierarchy root categories (e.g. general literature, hardware, software, etc.). In this comprehensive evaluation, we have assessed all the possible combinations of metadata features against different classifiers such as Random Forest, K Nearest Neighbor, and Decision Tree. The results of this research reveal that the title & keywords combination outperforms other combinations with an F-measure score of 0.88.

Researchers face difficulties in finding relevant papers to their research interest as the number of scientific publication is rapidly increasing on the web. Scientific paper recommenders have emerged as a leading solution to help researchers by automatically suggesting relevant and useful publications. Several approaches have been proposed on improving recommender systems. However, most existing approaches depend on priori user profiles, and thus they cannot recommend papers to new user. Furthermore, the existing approaches utilize non-public contextual information, and thus it cannot adequately find similarities between papers due to copyright restrictions. Also, the existing approaches consider only single level paper-citation relation to identify similarities between papers. Considering the above challenges, this paper presents a collaborative filtering based recommendation approach for scientific papers that does not depend on priori user profiles and which utilizes only public contextual information. Using citation context, we utilized 2-level paper-citation relations to find hidden associations between papers. The rational underlying this approach is that, two papers are co-occurred with same cited paper(s) and two papers are co-occurring with same citing paper(s) are significantly similar to some extent. To evaluate the performance of the proposed approach, publicly available datasets are used to conduct extensive experiments. The experimental results demonstrate that the proposed approach has significantly outperforms the baseline approaches in terms of precision, recall, F1, mean average precision, and mean reciprocal rank, which are commonly used information retrieval metrics. The novelty of this study is that, with the proposed approach, researchers are able to find relevant and useful publications over the internet regardless of their previous research experiences and research area.

In paper production, a jumbo reel is cut into multiple intermediate rolls, and each intermediate roll is then sheeted as finished goods. This problem is called a cutting stock problem and is proven to be NP-hard. The objective is to minimize material waste or trim loss from all the cuttings. In the case that any intermediate roll is not entirely used for its associated order, the intermediate roll itself could turn to be a dead stock. We use the concept of universal sizes of intermediate rolls to eliminate the dead stock. A pre-defined number of universal sizes of intermediate rolls is to be used to serve all the orders. The problem is solved using Reinforcement Artificial Bee Colony algorithm with Integer Linear Programming subroutine. This proposed approach is then tested with a set of 1,055 orders and 127 different sizes of sheet papers from a paper manufacturer. The results reveal that our method outperforms other algorithms. Our method offers the total trim loss of 3.51%, compared to the trim loss reported by the industry of at least 5%. This approach not only reduces the number of partially cut rolls, but also decreases the number of the jumbo reels needed to serve all the orders. Therefore, both the inventory cost and material cost can be saved.

The explicitly numerical or well-defined correlations between the dielectrics responses (DRs) and dielectric essences of oil-impregnated paper (OIP) insulation have not been fully understood yet. As a result, it is rather difficult to quantitatively diagnose the critical insulation condition, like determining moisture content in insulation paper (MCP) of power equipment only using electrical-based techniques such as frequency domain spectroscopy (FDS). To obtain MCP value, from a new perspective of parametric study on the circuital DR equivalence of OIP insulation-extended Debye model (EDM), the present contribution introduces a novel approach by exploring the pattern when EDM parameters vary with MCP and temperatures T. Further, mathematical correlations are developed between sensitive R-C values and MCP-T values. On the above analysis, small-scale physical models of real-life transformer bushings were prepared as test samples. Their OIP condenser bodies were artificially absorbed different controlled quantities of moisture and conditioned at different temperatures to record corresponding FDS results. Then a hybrid genetic algorithm combined with the Levenberg-Marquardt algorithm was proposed to estimate the EDM parameters by fitting the measured FDS data. Sensitive parameters therein were identified using subspectrum decomposition and formulated with MCP-T values so that a reliable moisture content estimation can be achieved once the testing temperature and FDS recordings of an insulation body are known.

Trap plays an important role in the charge transportation of three-layer oil-paper and the investigation of trap parameters at different degradation degree is of great significance for further research of the partial discharge (PD) mechanism. This article considers the turn-to-turn structure of on-board traction transformer. A defect model of three-layer oil-paper insulation was designed for PD test. The PD degradation samples are selected from the inception of PD to the breakdown of PD to study the characteristics of surface potential decay on degradation samples by using isothermal surface potential decay method. Given that, the trap distribution at different degradation stages was calculated and its influence on PD characteristics was investigated. The result shows that AC fluctuation voltages caused by inter-harmonic has a great influence on PD distribution, surface charge distribution and trap distribution. With the increase of degradation, the decay rate of surface potential increases and the decay rate of AC fluctuation voltages is larger than that pure AC. And also, the number of shallow trap with AC fluctuation voltages is larger than that with pure AC. The rate of free charge increases with the number of shallow trap increasing. More free electrons involves in the process of PD, accelerating the aging rate of three-layer oil paper samples. Therefore, it can be concluded that surface charge and trap distribution are helpful to clarify PD mechanism.

The oil-paper insulation system is widely used for the insulation purposes of power transformers as a result of its ability to withstand high thermal and electrical stresses. The presence of a gas cavity between impregnated papers layer is a serious problem. When localized breakdown takes place within this cavity, partial discharge (PD) occurs and ages the rest of the insulation system. This aging phenomenon declines the expected life time of the insulation system and subsequently the life time of the power transformers. Dissolved gas analysis is a recommended technique that is used in order to assess the state of the insulation system inside the transformers. In this paper, PD is recorded in the case of gas cavity presence between the layers of the impregnated papers under the effect of AC and DC voltage stress. This record is extended from the instance of PD inception until the breakdown of the whole insulation system. Furthermore, the concentration of the gases that dissolve in the insulating oil due to the aging of the impregnated paper is measured eight times during the record of the PD. Finally, the degradation of the insulating papers is studied optically through the use of a microscope at different stages of the aging test. Depending on PD measurements, dissolved gas analysis (DGA) results, and the optical study of the paper aging, the evolution of the aging of oil-paper insulation system as a result of internal PD is declared when AC and DC voltage stresses are applied. It is obtained that the aging evolutionary process totally differs with the alteration of the applied voltage.

An electrical tree discharge model of multilayer insulation paper was prepared, and a voltage of 20 kV was used for electrical tree cultivation and initiation tests. Based on the microscopic image information and partial discharge (PD) information during the aging of the electrical tree, the development of electrical tree discharges between layers of paper comprising epoxy resin-impregnated paper insulation was studied. The results show that, by analysing PD information such as the discharge volume phase spectrum and the discharge repetition rate phase spectrum, the development of the electrical tree branch progresses in four stages: initial, growth, stagnation, and bursting. During the growth and stagnation stages, the main discharge paths of the electrical tree are mainly formed, and there are many filamentous fibres on the path edge. During the burst stage, more branches will be formed on the electrical tree, which will cause the greatest damage to the insulation. With the extension of the electrical tree path, the discharge magnitude and discharge times also increase. There are specific discharge patterns in different growth stages of the electrical tree, and the number of discharge events in each positive half-cycle is significantly greater than that in a negative half-cycle. Combining the microscopic image information and PD information during the aging of such an electrical tree, a theoretical basis for evaluating insulation state by PD monitoring is realised. The long-chain molecules of cellulose and epoxy resin break bonds and oxidise, which decompose into a large number of free radicals, monosaccharides, and other low-molecular-weight products.

The low frequency section of frequency domain spectroscopy (FDS) of oil-paper insu- lation system can effectively reflect the ageing state and moisture of the oil-immersed paper. Meanwhile, steady-state insulation resistance is the one of indexes for the condition of transformer. In actual measurement, these two both are time-consuming and poor accessibility, thereby restraining their field applications. Aim at this problem, this paper analyses the polarization process of the oil-paper insulation in transformer, and adopts a low frequency equivalent circuit model for the oil-paper insulation to characterize the polarization process at low frequency. The simulated annealing particle swarm optimization (SAPSO) algorithm is proposed to identify the parameters in equivalent circuit, which are affected by change of insulation state. Compared with the experimental results, the errors of the steady-state insulation resistance and the tan δ below 10-3 Hz, which are calculated by the identified parameters, are less than 2.5%. This method can avoid the influence from external environment and reduce the measurement time. The time and frequency domain parameters calculated can provide reference for the ageing assessment of oil-immersed paper.

The interest in developing and testing dielectric nanofluids for electrotechnical purposes has increased significantly in the last ten years. A number of works have been published reporting dielectric and thermal properties for these liquids that enhance those of conventional insulating fluids. Some authors propose that the application of dielectric nanofluids to transformer insulation could improve the reliability of transformers and open new possibilities for transformer design. However, this will not be feasible until thorough studies on the interaction of these materials with other elements of the transformer, specially the solid insulation, are carried out. In this work, the effect of the presence of nanoparticles on the dielectric response of oil and oil-paper insulation is analysed in laboratory conditions. Specimens have been prepared to emulate the insulation system of transformers and the dielectric response in the frequency domain of these specimens has been characterized. The dependence of nanoparticle concentration on the dielectric response has been analysed. Proposing physical mechanisms that explain the experimental results observed over the oil and the paper samples. Some conclusions are extracted in this work that may be of interest if nanofluids are considered as liquid insulation for transformers.

The heat dissipation factor of conventional epoxy impregnated paper bushings is a subject of concern due to the large quantities of power in a High Voltage Direct Current (HVDC) system. The present work deals with the selection of better insulation as a replacement to the conventional resin impregnated material employing nano-hexagonal-Boron Nitride and nano-hexagonal-Boron Nitride added with nano-cellulose-fiber. The bushing of the converter transformer is designed using the Finite Element Method (FEM), and the electrothermal analysis is performed at the loaded working condition. Besides, numerous optimization schemes are also presented for adapting the structure of the thermal conductor enclosed in the inner conductor. The electrothermal performances of the above materials with the optimized structure are compared and an advanced scheme is proposed. Further, the results obtained from the designed system are employed in the form of an Artificial Neural Network to simplify the process of thermal computation characterized by the selected scheme. The internal parameters of the neural network are tuned implementing a hybrid amalgamation of Particle Swarm optimization - Grey Wolf Optimiser and the performance is compared against the actual values. The supremacy of the implemented algorithm is justified by a comparative analysis with other well-established algorithms using various statistical parameters.

Kevlar pulp treated with low-temperature plasma and nano cellulose fibrils (NCFs) have been introduced as reinforcements in the preparation for composite insulating paper with low relative permittivity, dielectric loss, good mechanical properties, and thermal stability. More polar groups of Kevlar fibers could be exposed after plasma treatment. Results showed that the relative permittivity of the composite paper containing 20% Kevlar pulp, 10% NCF, and 70% softwood pulp is decreased by 29.6% and the dielectric loss is decreased by 43.2% at 50 Hz, 25°, compared with the conventional paper formed by pure softwood pulp. The change was due to the introduction of Kevlar pulp with intrinsic low dielectric constant and loss, which decreases the whole polarizability of the paper. The mechanical properties of the composite paper became worse after introducing 20% Kevlar pulp. About 10% NCF can work as a mechanical reinforcement to compensate for the tensile and Yang's modulus loss. Scanning electron microscopy results showed that NCF could fill the void defects and improve the interface bonding of the fibers to enhance the paper mechanical properties. The composite paper also had better insulating and thermal properties than the conventional paper. It has been concluded that the Kevlar pulp/NCF/softwood pulp composite paper has the potential to replace the pure softwood paper for the application of high-voltage ac transformer insulation.

This study explores the method of applying surface enhanced Raman scattering (SERS) in diagnosing the aging stage of oil-paper insulation equipment in the power system, which provides access to the on-line mornitoring of electrical equipment. Oil-paper samples in different aging stages were obtained by accelerated aging experiments. Effective Raman signals of insulating oil were collected by using the self-made hexagonal sliver nano-plates SERS substrates and the self-assembled Raman detection platform. For the SERS data of oil-paper insulation samples, kernel entropy component analysis (KECA) was applied to extract the Raman spectral features and support vector machine (SVM) was used to recognize the the aging stage of oil-paper insulation. The results demonstrate that the KECA-SVM method exhibits a good diagnostic capacity and the recognition accuracy of the propsed method reached 81.43 % (57/70). In summary, a new spectral method is proposed to diagnose the aging stage of oil-paper insulation, which lays a foundation for the actual diagnosis of the aging condition in running oil-paper insulation equipment by Raman spectroscopy.

Researchers from academia and the corporate-sector rely on scholarly digital libraries to access articles. Attackers take advantage of innocent users who consider the articles' files safe and thus open PDF-files with little concern. In addition, researchers consider scholarly libraries a reliable, trusted, and untainted corpus of papers. For these reasons, scholarly digital libraries are an attractive-target and inadvertently support the proliferation of cyber-attacks launched via malicious PDF-files. In this study, we present related vulnerabilities and malware distribution approaches that exploit the vulnerabilities of scholarly digital libraries. We evaluated over two-million scholarly papers in the CiteSeerX library and found the library to be contaminated with a surprisingly large number (0.3-2%) of malicious PDF documents (over 55% were crawled from the IPs of US-universities). We developed a two layered detection framework aimed at enhancing the detection of malicious PDF documents, Sec-Lib, which offers a security solution for large digital libraries. Sec-Lib includes a deterministic layer for detecting known malware, and a machine learning based layer for detecting unknown malware. Our evaluation showed that scholarly digital libraries can detect 96.9% of malware with Sec-Lib, while minimizing the number of PDF-files requiring labeling, and thus reducing the manual inspection efforts of security-experts by 98%.

When the inner insulation of oil-impregnated paper bushing breaks down in service, gases decomposed by oil and paper may cause an explosion. The explosion of bushing occurs from time to time because of the lack of an effective monitoring method. In order to provide an effective online monitoring method for the bushing to avoid explosion, this paper presents a method to monitor the PD defect in bushing by measuring the inner pressure of bushing. In this paper, the relationship of variation between characteristic gases content and inner pressure is studied, the effect of inner temperature on inner pressure is analyzed and the method for reducing this effect is also presented, and the monitoring method is proved to be useful by PD tests on a real bushing. The results show that the inner pressure increases obviously due to the generation of characteristic gases by internal discharge in oil-impregnated paper bushing, and the pressure increases with the deterioration of the discharge; although the inner pressure has a great influence on the inner pressure, the influence can be reduced or eliminated greatly by the method of common-mode rejection. According to the results, the internal discharge defect of the oil-impregnated paper bushing can be detected by monitoring the pressure, and the bushing explosion can be avoided.

Paper-based strain sensors have attracted attention as a cost-effective and environmentally friendly approach to wearable electronic devices. This paper proposes a paper-based strain sensor created solely using hand-painting, which is a simple, equipment-free process utilized in green electronics. Commercial printing paper is coated with polydimethylsiloxane diluted with heptane, which provides moisture resistance and mechanical robustness while increasing the hydrophobicity of the surface. The electrodes and conduction channels are fabricated using a pencil for graphite deposition and a brush for the deposition of tin-doped indium oxide nanoparticles, respectively. With a gauge factor of 41.98 in tensile strain tests and 21.36 in compressive strain tests, our strain sensor exhibits a good sensitivity that is similar to that of previously reported paper-based sensors. We also demonstrate that our proposed strain sensor can be used as a weak motion detection device for humans and robots.

The aging of the transformer oil-paper insulation distributes spatially, which results in changes in paper resistivity in different regions. This paper establishes an iterative inversion algorithm using the finite element method to calculate the oil-immersed paper resistivity in different regions of a transformer. This algorithm sets the transformer dielectric loss factor tan δ at low frequency, the dielectric parameters of the transformer oil as inputs and the oil-immersed paper resistivity as output. The resistivity obtained from inversion can be used as a reference to access the insulation state of the oil-paper insulation. This paper aims at achieving the nondestructive detection of the partial state of the oil-paper insulation.

Failures of bushing caused by corrosive sulfur has gradually appeared in recent years. Apart from copper and sulfur, certain amount of aluminum was also found both in oil and paper after disassembling. The corrosion mechanism of the aluminum foil and its effect on oil-paper insulation were unknown. In this study, series of sulfur corrosion experiments were taken to investigate the sulfur corrosion of aluminum foil. The results showed the aluminum foil could certainly be corroded in oil containing corrosive sulfur (DBDS). Thermal products of insulting paper triggered the corrosion by removing the alumina film on the surface. Then, the contact corrosion occurred between aluminum and DBDS. In addition, the mechanisms of corrosion products generation both in oil and on paper were studied. The corrosion products in oil was DBDS-Al(3,4) and that on paper was RCOOAln. It caused the decrease of electrical properties of oil-paper. Particularly, the dielectric loss of oil and paper were dramatically enhanced.

The accelerating rate of scientific publications makes it extremely difficult for researchers to find out the relevant papers and related works. Recommender systems that aim at solving the information overload problem have attracted lots of attention. However, existing paper recommendation works generally rely on the simple citation-ships between papers, which ignore the heterogeneity of the academic graphs. In this paper, we solve the personalized paper recommendation problem in the setting of heterogeneous information networks. A heterogeneous graph representation based recommendation method named HGRec is proposed. First, the author and paper profiles are constructed based on the extracted contents information. Second, we initialize the node vectors by employing the word-embedding technique. Third, we jointly update the node embeddings in the heterogeneous graph by proposing two meta-path based proximity measures. Finally, the paper recommendation is completed by calculating the similarity of the generated author and paper feature vectors. We present experiments on a real academic network, the DBLP network. The comparative results demonstrate the effectiveness of the proposed personalized recommendation approach compared to state-of-the-art methods.

To improve the accuracy of user implicit rating prediction, we combine the traditional latent factor model (LFM) and bidirectional gated recurrent unit neural network (BiGRU) model to propose a hybrid model that deeply mines the latent semantics in the unstructured content of the text and generates a more accurate rating matrix. First, we utilize the user’s historical behavior (favorites records) to build a user rating matrix and decompose the matrix to obtain the latent factor vectors of users and literature. We also apply the BERT model for word embedding of the research papers to obtain the sequence of word vectors. Then, we apply the BiGRU with the user attention mechanism to mine the research paper textual content and to generate the new literature latent feature vectors that are used to replace the original literature latent factor vectors decomposed from the rating matrix. Finally, a new rating matrix is generated to obtain users’ ratings of noninteractive research papers and to generate the recommendation list according to the user latent factor vector. We design experiments on the real datasets and verify that the research paper recommendation model is superior to traditional recommendation models in terms of precision, recall, F1-value, coverage, popularity and diversity.

Tight assembly of stator windings with no insulation paper damage is a manufacturing challenge. We evaluate different sets of parts according to the following parameters: magnet wire thickness, stator slot smoothness, length of the straight magnet wire after the slot end, and type and amount of insulation cap at the end of the slot. These parameters have discrete values with small differences between them. The damage criterion is the decrease of the insulation paper breakdown voltage after assembly/disassembly of parts, assembled in a small set of designed experiments. Parameter values, i.e., levels at individual experiments are set by an orthogonal experiment matrix. Repetition of each experiment provides statistical significance. Data analysis shows that the additive model alone is not sufficient due to the high correlation of the parameters’ influences. We extend the model to include interparameter influences, which we model by adding a virtual parameter. The extended additive model generates parameter values that do not degrade the insulation paper breakdown voltage within the manufacturing process. These values are verified by repetitions of the control experiment.

Software fault prediction (SFP) is a research area that helps development and testing process deliver software of good quality. Software metrics are of various types and are used in SFP for measurements. Inheritance is a prominent feature, which measures the depth, breadth, and complexity of object-oriented software. A few studies exclusively addressed the efficacy of inheritance in SFP. This provokes the need to identify the potential ingredients associated with inheritance, which can be helpful in SFP. In this paper, our aim is to collecting, organizing, categorizing, and investigating published fault prediction studies. Findings include identification of 54 inheritance metrics, 78 public datasets with various combinations of 10 inheritance metrics, 60% use of method level & use of private datasets, an increased number of studies using machine learning approaches. This study will facilitate scholars to studying previous literature on software fault prediction having software metrics, with their methods, public data sets, performance evaluation of machine learning algorithms, and findings of experimental results in a comfortable, and efficient way, emphasizing the inherited aspect specifically.

© 2013 IEEE. With the rapid growth of scientific publications, it is hard for researchers to acquire appropriate papers that meet their expectations. Recommendation system for scientific articles is an essential technology to overcome this problem. In this paper, we propose a novel low-rank and sparse matrix factorization-based paper recommendation (LSMFPRec) method for authors. The proposed method seamlessly combines low-rank and sparse matrix factorization method with fine-grained paper and author affinity matrixes that are extracted from heterogeneous scientific network. Thus, it can effectively alleviate the sparsity and cold start problems that exist in traditional matrix factorization based collaborative filtering methods. Moreover, LSMFPRec can significantly reduce the error propagated from intermediate outputs. In addition, the proposed method essentially captures the low-rank and sparse characteristics that exist in scientific rating activities; therefore, it can generate more reasonable predicted ratings for influential and uninfluential papers. The effectiveness of the proposed LSMFPRec is demonstrated by the recommendation evaluation conducted on the AAN and CiteULike data sets.

Oil-paper insulation will inevitably endure impulse voltage with a superimposed dc voltage (superimposed voltage) because of introduced lightning or switching, which can induce charge accumulation and trigger flashover during the operation of a converter transformer. Temperature rise is also a nonnegligible factor that can significantly influence the performances of oil-paper insulation. This paper aims to reveal the effects of ambient temperature and superimposed voltage on surface charge and flashover behaviors in an oil-paper insulation system. Surface potential decay (SPD) experiments were performed under superimposed voltage with various polarity and amplitude combinations and at the temperature ranging from 20 °C to 80 °C. The results show that the initial surface potential and decay rate increase as the amplitude of the impulse voltage increases at 20 °C. The initial surface potential declines, and the process of SPD is accelerated at higher temperatures because of the increased concentration of shallow traps. Subsequently, flashover tests were conducted under superimposed voltage. It is found that flashover occurs after applying superimposed voltages even with a rather low dc voltage. In addition, the dc voltage component is primarily responsible for flashover. Weibull results also indicate that it is prone to trigger flashover at higher temperatures, because thermal excitation helps more carriers to escape from deep traps and participate in the process of flashover. Accordingly, the insulation characteristics of oil-paper system can be significantly influenced by superimposed voltage and temperature, which should draw great concern among the power grid.

With the rapid growth of scientific publications, research paper recommendation which suggests relevant research papers to users can bring great benefits to researchers. In this paper, we focus on the problem of recommending conference papers to the conference attendees. While most of the related existing methods depend on the content-based filtering, we propose a unified conference paper recommendation method named $CPRec$ , which exploits both the contents and the authorship information of the papers. In particular, besides the contents, we exploit the relationships between a user and the authors of a paper for recommendation. In our method, we extract several features for a user-paper pair from the citation network, the coauthor network, and the contents, respectively. In addition, we derive a user’s pairwise preference towards the conference papers from the user’s bookmarked papers in each conference. Furthermore, we employ a pairwise learning to rank model which exploits the pairwise user preference to learn a function that predicts a user’s preference towards a paper based on the extracted features. We conduct a recommendation performance evaluation using real-world data and the experimental results demonstrate the effectiveness of our proposed method.

Citation count is a widely-used indicator for calculating the academic impact of scientific papers, but it is limited because it assumes all citations are of similar value and weights each equally. By examining the influence changes in papers' citation distribution and the cited papers' unequal contributions to the citing ones, this study aims to distinguish citations and, on this basis, evaluate the academic impact of the papers. Three indices of time-weighted citation count, citation width and citation depth are proposed to distinguish citations and perform the evaluation task. The experimental results show that papers exhibit different influence intensity characteristics in different periods of citation life. Those papers got larger citations in recent years are more influential and more active to gain new citations. The papers show the different scope of influence in their citing environment, although they were originally published in the same journal and the same year. In addition, the different frequency of mentions and the different subject similarities with the citing works suggest that the papers have different importance and usefulness for subsequent research. These results suggest that these three indices do help to distinguish citations and reveal the different intensity and contribution of influences in citations. Finally, the three indices are integrated into the overall evaluation of the academic impact of the paper, and the weight of each index is calculated by the entropy weight method. Quite different overall impacts in the paper are shown due to their different performances in the three indices, even though they have the same total number of citations.

Most existing studies and public datasets for handwritten Chinese text recognition are based on the regular documents with clean and blank background, lacking research reports for handwritten text recognition on challenging areas such as educational documents and financial bills. In this paper, we focus on examination paper text recognition and construct a challenging dataset named examination paper text (SCUT-EPT) dataset, which contains 50 000 text line images (40 000 for training and 10 000 for testing) selected from the examination papers of 2 986 volunteers. The proposed SCUT-EPT dataset presents numerous novel challenges, including character erasure, text line supplement, character/phrase switching, noised background, nonuniform word size, and unbalanced text length. In our experiments, the current advanced text recognition methods, such as convolutional recurrent neural network (CRNN) exhibits poor performance on the proposed SCUT-EPT dataset, proving the challenge and significance of the dataset. Nevertheless, through visualizing and error analysis, we observe that humans can avoid vast majority of the error predictions, which reveal the limitations and drawbacks of the current methods for handwritten Chinese text recognition (HCTR). Finally, three popular sequence transcription methods, connectionist temporal classification (CTC), attention mechanism, and cascaded attention-CTC are investigated for HCTR problem. It is interesting to observe that although the attention mechanism has been proved to be very effective in English scene text recognition, its performance is far inferior to the CTC method in the case of HCTR with large-scale character set.

The problem of sulfur corrosion has seriously affected the safe and stable operation of the power transformers. Currently, adding passivators into the transformer oil is the most effective method to suppress the problem. However, no explicit provisions have been made for the optimum concentration of the specific passivators. In this paper, the transformer oils with different corrosive sulfurs and different aging degrees were used to study the protective performance of three different passivators. By comparing the copper surface, the optimum concentrations for each passivators were acquired. Moreover, by testing the breakdown voltage, dielectric loss factor, volume resistivity, and moisture content of the insulating oil after adding passivators with the optimal concentration, the effect of three passivators on the oil quality was obtained. Results show that the three passivators have different protective performance on different types of corrosive sulfurs. Irgamet 39 has a better protective effect at lower concentrations than the other two. The protective effect of all three passivators on dodecyl mercaptan is poor, and a new type of passivator capable of protecting against dodecyl mercaptan needs to be developed. Moreover, the three passivators have different protection performance on the transformer oils with different aging degrees. The protective performance is poor especially for the oils with longer running years or passivators with lower concentrations. Among the three passivators, Irgamet 39 had the smallest impact on the oil quality, followed by T571 and then TTA. The above research can provide some references for guiding the passivator addition in actual projects and preventing the occurrence of sulfur corrosion failures.

Transmission schemes taking both sum rate and fairness into account for dirty paper coding (DPC) based MIMO downlink communications are investigated in this paper. In contrast to existing works which have mostly focused on maximizing the sum rate, we first investigate the problem of finding the maximal sum rate achieved by DPC when the qualitative notions of fairness such as max-min fairness and proportional fairness are employed. This corresponds to a nonconvex problem and cannot be solved by usual weighted sum rate techniques. Several efficient methods for finding the optimal solutions are presented in this paper when the order of users is adjustable during DPC encoding. Simulation results show surprisingly and impact greatly on the design of practical systems that it is often possible to achieve the sum rate capacity with absolute fairness, i.e., an equal rate for each user, when multiple encoding orders of users are used during transmission. When sum rate capacity and absolute fairness cannot be achieved at the same time, the optimal tradeoff between sum rate and fairness is also provided for a general class of quantitative fairness measures.

The main purpose of this paper is to present the methodology for calculating the electromagnetic behaviour of real integrated circuit (IC) parts using a no-mesh local Finite Differential Method (FDM). Furthermore, the comparison of computational results and measurements is presented. All considerations are based on typical long transmission lines (TLs) in modern ICs. The obtained results have been analysed in detail and compared with measured values. The measurement data are de-embedded using the test board model. This problem is illustrated in this paper based on a practical example of the Multi-Conductor Transmission Lines test structure whose electrical responses to various excitations are presented and analysed in detail.

With the wide application of vegetable insulating oil in power transformers, it is essential to investigate the influence of moisture on the frequency domain dielectric spectrum (FDS) analysis in order to propose an accurate moisture assessment method for vegetable oil-paper insulation system. In this regard, various vegetable oil-paper samples are prepared in a laboratory environment. FDS curves for all samples are obtained at different moisture contents and operating temperatures. A new method to estimate the moisture content in insulation paper is proposed based on the low-frequency characteristic quantity. Also, the effect of operating temperature and water migration between the oil and paper insulation on the FDS analysis is investigated. Based on this analysis, a compensation factor is introduced to eliminate the influence of temperature on paper moisture assessment. Furthermore, an improved normalization method for the temperature effect on the FDS of vegetable oil-paper insulation with different moisture contents is proposed. The proposed moisture assessment and temperature normalization methods are validated thorough their application on an operating power transformer.

The condition of a power transformer can be predicted based on the contents of the transformer oil. One of the most common parameters that are observed in the transformer oil is 2-Furaldehyde, a compound that is produced due to the aging of Kraft paper. Although the optical characterization of 2-Furaldehyde has been widely reported, the fundamental theories of the observation of the optical absorbance peaks have not been elaborated. This study investigates the optical characteristics of 2-Furaldehyde in the near infrared region. Ten samples with different concentrations of 2-Furaldehyde were prepared and verified using the conventional method. The samples were then characterized using optical spectroscopy method with 50 mm path length cuvettes. Three peaks were observed at 1610 nm – 1640 nm, 1100 nm – 1115 nm and 860 nm – 890 nm wavebands and were correlated to the overtones of the aromatic C-H stretch in 2-Furaldehyde. The appearance of these overtones corresponding to the Morse Oscillation Theory was discussed. This fundamental knowledge is significant in developing a portable optical device that enables the detection of 2-Furaldehyde on site.

Delivering confidential messages in wireless network is gaining continuous attraction as a fundamental building block for the Internet of things (IoT). This paper overviews the confidential message transmission techniques in broadcast channel (BC) where a transmitter serves multiple users by delivering confidential messages to their intended users. Each confidential message must be prevented from extracting its information by any unintended users. First, we consider a basic network consisting of two users. In the two-user BC, the secret dirty paper coding (S-DPC) achieves the secrecy capacity region. However, since the DPC requires a high computational complexity for characterizing the capacity region, two sub-optimal transmission techniques with low complexities are explained. Second, we extend our discussion to the network including more than two users. For $K$ -user BC with confidential messages, the optimal transmission scheme and the secrecy capacity region have not yet been derived. Instead of presenting the optimal scheme, we explain two sub-optimal transmission techniques and compare their features and performances. In conclusion, we discuss the open problems in the confidential message transmission for networks with more than two users.

Voice-over IP (VoIP) technology is a kind of digital transmission technology based on IP network. It is one of the important methods to use voice service in VoIP as steganographic carrier to ensure secure transmission. However, the traditional steganographic code has some problems, such as low embedding efficiency and weak concealment, which cannot meet the requirements of VoIP streaming media information hiding for the security of secret information. Therefore, a steganographic algorithm combining F5 and simplified wet paper code (SWPC) algorithm is proposed. The main idea is to embed secret messages in each row of the carrier matrix using the F5 algorithm, and then the SWPC algorithm is used to embed the columns according to the wet and dry characteristics of the wet paper code without affecting the results before row embedding. We use the VoIP streams encoded by the ITU-T G.729a codec as a carrier to verify the proposed scheme. The experimental results demonstrate that the proposed scheme can achieve relatively better IP speech data steganographic transparency and that it can outperform F5-WPC and SWPC approaches.

This paper investigated the influence of paper-wrapped on the deposition of sulfur corrosion on the insulation winding (paper-wrapped copper conductor) in oil-immersed insulation containing dibenzyl disulfide (DBDS). The distribution of sulfur corrosion deposit on a 500-kV electric reactor was investigated and analyzed, and the properties of oil were analyzed. Aging experiments were also conducted for oil-paper insulation with 500-mg/kg DBDS under IEC 62535 corrosion test condition. The corrosion degree of insulation winding was evaluated, and the properties of oil were also discussed. Results showed that the enwinding pattern of the insulating paper on the copper conductor affected the deposition distribution of copper sulfide to be an alternate appearance of a non-corroded crevice and a strip-shaped corrosion deposit on the copper conductor according to the results of field and laboratory. Furthermore, for the insulation winding, the increased number of paper layers on the copper conductor led to the aggravation of sulfur corrosion, prevented the diffusion of copper ions in the oil, and accelerated the formation of acids, which co-affected the properties of the oil. The enwinding of insulating paper on the copper conductor led to the appearance of a tiny crevice on the insulation winding, which is an important occurrence precondition of crevice corrosion. Finally, the mechanism underlying crevice corrosion for insulation winding was theorized as electrochemical corrosion leading to copper sulfide formation.

Furfural content in transformer oil is considered a credible method to evaluate the aging extent of insulation paper and is extensively applied to the aging assessment of insulation system in transformers. Clearly, the accuracy of furfural analysis is directly related to the stability of furfural in oil, which, nevertheless, may be affected by various factors. In this research, furfural was added to insulation oil directly to analyze its stability in oil firstly. Furfural contents in different conditions, such as different temperatures, copper, and oxygen atmosphere, are measured regularly. The results corroborate that the furfural content in the oil keeps constant when the oil temperature is less than 130°C without copper or oxygen; copper cannot make furfural in oil degrade without oxygen when the temperature is below 90°C. These results indicate that the furfural is stable at the common operating temperature of transformer oil (40°C ~ 70°C) as long as no oxygen is in oil. Oxygen is the main degradation cause of furfural in oil, and high temperature and copper accelerate this progress. The oxidation product of furfural in oil has been explored, which shows that the furoic acid is the main degradation product of furfural when the temperature is less than 90°C. Thus, the furoic acid content in oil can be measured as a reference to increase the accuracy of the furfural analysis.

Random unitary beamforming (RUB) achieves multiuser diversity gain over multiple-input multiple-output broadcast channels with partial channel state information (CSI). RUB can asymptotically achieve the same growth of rate $M\log \log K$ as the optimal dirty paper coding or sub-optimal zero-forcing beamforming, which need full CSI at the transmitter. In this paper, we propose energy efficient RUB systems that select the optimal number of streams and transmission power to maximize energy efficiency (EE). In contrast to other beamforming schemes that use full CSI, optimizing RUB in terms of EE is a difficult task due to the CSI constraints. To solve this problem, we first select the EE-optimal number of streams and transmission power by using the statistical characteristics of RUB, which have been studied in previous works. Next, based on partial CSI feedback from users, we propose the method whereby the transmitter of RUB can adaptively control the transmission power. Simulation results demonstrate that our proposed systems can improve the EE performance of RUB and that the analytical results derived in this paper are accurate.

Citations play an important role in ranking of authors, journals, institutions, and organizations. Sometimes, citing documents cite a reference many times in their full-text, which is further used in many application scenarios, such as: 1) finding relationship between cited and citing papers; 2) identifying influential cited paper from set of references in citing paper; 3) identification of suitable citation functions; and 4) study of in-text citations in different logical sections of papers to conclude different findings. The accurate identification of in-text citations remained an open area of research. Recently, the complexities involving automatic identification of in-text citations have been reported with an accuracy rate of 58%. This is due to many issues as highlighted by the state-of-the-art research. This paper investigates such issues in further details: 1) by taking benefits from the previous research; 2) by analyzing different referencing formats; and 3) by experimenting on a comprehensive data set. Based on the investigation, this paper proposes a taxonomy and workable system, which utilizes a set of heuristics build from detailed study. The proposed model is then applied on unseen diversified data set taken from the Journal of Universal Computer Science and CiteSeer. The proposed model was able to achieve an average F-score of 0.97 as compared with the baseline 0.58.

The AlphaZero algorithm achieved superhuman levels of play in chess, shogi, and Go by learning without domain-specific knowledge except for game rules. This paper targets stochastic games and investigates whether AlphaZero can learn theoretical values and optimal play. Since the theoretical values of stochastic games are expected win rates, not a simple win, loss, or draw, it is worth investigating the ability of AlphaZero to approximate expected win rates of positions. This paper also thoroughly studies how AlphaZero is influenced by hyper-parameters and some implementation details. The analyses are mainly based on AlphaZero learning with lookup tables. Deep neural networks (DNNs) like the ones in the original AlphaZero are also experimented and compared. The tested stochastic games include reduced and stronglysolved variants of Chinese dark chess and EinStein würfelt nicht!. The experiments showed that AlphaZero could learn policies that play almost optimally against the optimal player and could learn values accurately. In more detail, such good results were achieved by different hyper-parameter settings in a wide range, though it was observed that games on larger scales tended to have a little narrower range of proper hyper-parameters. In addition, the results of learning with DNNs were similar to lookup tables.

This paper reports the latest technological advances made by the Industrial Technology Research Institute (ITRI) in flexible displays, especially the flexible substrate, thin-film transistor (TFT) backplane, and active matrix organic light-emitting diode display. Using the leading cholesteric liquid crystal technology of ITRI, we develop a rewritable, environmentally friendly thermal printable e-paper. The epaper, devised to reduce traditional paper consumption, achieves a high resolution of 300 dpi with a memory function. In addition, we report on the ITRI's initial success in demonstrating a complete R2R process for multisensing touch panels on 100-μm thick flexible glass substrates provided by Corning.

During the New Space era small countries are becoming important players in the space business. While space activities are rapidly increasing globally, it is important to make operations in a sustainable and safe way in order to preserve satellite services for future generations. Unfortunately, the sustainability aspect has been largely overlooked in the existing surveys on space technologies. As a result, in this survey paper, we discuss the multi-layer networking approaches in the 6G era specifically from the sustainability perspective. Moreover, our comprehensive survey includes aspects of some interesting industrial, proprietary, and standardization views. We review the most important regulations and international guidelines and revisit a three-dimensional architecture vision to support the sustainability target for a variety of application areas. We then classify and discuss space safety paradigms that are important sustainability enablers of future satellite communications. These include space traffic management, debris detection, environmental impacts, spectrum sharing, and cyber security aspects. The paper also discusses advances towards a planned European connectivity constellation that could become a third flagship infrastructure along with the Galileo and Copernicus systems. Finally, we define potential research directions into the 2030s.

Increasing student numbers in higher education, particularly in engineering and computer science, make it difficult for motivated lecturers to continue engaging in active teaching methods such as Flipped Classrooms and Work-Based Learning. In these settings, digital Peer Assessment can be one approach to provide effective and scalable feedback. In Peer Assessment, students assess each other’s performance whilst gaining useful reflection and judgment skills at the same time. This umbrella review of 14 review papers on the use of (digital) Peer Assessment in education provides a comprehensive overview of design choices and their consequences open to educational practitioners wishing to implement digital Peer Assessment in their courses, the type of tooling available and the possible effects of these choices on the learning outcomes as well as potential pitfalls and challenges when implementing Peer Assessment. The paper will inform and assist educators in finding or developing a tool that fits their needs.

This paper is concerned with the stability analysis of fixed-point state-space digital filters with generalized overflow arithmetic and a time-varying delay. This paper aims to derive a delay and nonlinear function bound dependent asymptotical stability criterion with less conservatism. Firstly, a new Lyapunov functional with several augmented terms, including extra free matrices and overflow nonlinear function, is constructed such that it has a relaxed positive condition. Then, for bounding the summation term arising in the forward difference of Lyapunov functional, a new lemma is developed to introduce the terms for linking the delayed states and the overflow nonlinear function, the Wirtinger-based summation inequality and several zero-value terms are applied to add more cross terms. As a result, a stability criterion with less conservatism is established and its conservatism. Finally, several numerical examples are given to illustrate the advantages of the proposed method.

The radar jamming technology has been studied in this paper mainly, which uses the antenna synthetic wave to generate phase distortion at the signal reception to carry out angle measuring jamming, such as traditional cross-eye jamming. However, cross-eye jamming has strict parameter tolerance. To improve the tolerance range of the phase parameters, a multiple antennas synthetic false target electromagnetic jamming technique is proposed in this paper, which has a wider phase parameter tolerance and jamming range. The jamming method can be regarded as an improved cross eye jamming method. We can conclude that this method can generate a “false target” in space and far away from the carrier which has jamming system, which mislead the radar to point to “false target” rather than to real targets. A jamming system with three jamming antennas was considered as the research object. The position of “false target” can be controlled casually by adjusting the feed amplitude and phase of the three antennas simultaneously. The jamming mathematical model of synthetic false target with three antenna emitters is constructed under the sum and difference channel transceiver mechanism of radar in this paper. The error angle and synthetic gain of the three jamming antennas were derived. The phase parameter tolerance of the proposed method was obtained- and compared with cross-eye jamming. A rigorous mathematical derivation is proposed in this paper, and the superiority of the multiple antennas synthetic false target jamming method is verified.

The sudden demand rises in security made researchers come up with solutions that provide instantaneous safety better than the state of the art solutions. The quest for securing data began in the Spartan era. People are now looking to expand this field of research by attacking the existing paradigms and inventing new algorithms that prove to be better than their vulnerable counterparts. Unmanned aerial vehicles (UAVs) are very much prevailing due to their sleek design and flexible mobility in many sectors such as agriculture, army, healthcare, monitoring and surveillance, and many more. We discuss the growth and demand of drone technology along with its importance in this article. The paper also throws some light on the ongoing security issues in real-time scenarios and the role of quantum cryptography in securing the information over the traditional solutions. Motivated by this, we present a survey on quantum cryptography’s importance, role, and benefits in securing UAV communications underlying beyond 5G networks. A novel quantum cryptography-based layered architectural solution is also proposed to achieve high data security and efficient transmission. This paper also present a case study on the battlefield application on the Internet of military things. The performance of the proposed case study system is evaluated by considering the latency, security, and reliability.

Supercomputers are trying to be eco-friendly using their main components like- interconnection networks, processors, and shared memory through high power efficiency (GFlops/watts). The reason for this is the exascale systems, are on the horizon, require a 1000 times performance improvement over the petascale computers and energy efficiency has attracted as the key factor for to achieve exascale system. The main contribution of this paper is to introduce a new hierarchical interconnection network; considering simulations at the million processing cores especially for the exascale system. Moreover, our designed network claims the supremacy of high network performance and low power consumption over the conventional networks and ensuring the utmost preferability for exaFLOPS system. On the other hand, the performance per watt metric, used for the TOP500 list, doesn’t reflect the overall performance of a given system. Hence, one of the possible solutions to reach the next generation exascale performance is to redesign the “Interconnection Network”, which holds the main responsibility for the intercommunication between the CPUs and also the power consumption for the supercomputers. This paper focuses on a redesigned new energy efficient interconnection network that mitigates the problems of high power consumption, longer wiring length, and low bandwidth issues. Our designed network (HFBN) has been compared against the Tofu network and in the case of 1M cores, HFBN can obtain about 87.26% better energy efficiency with uniform traffic, about 86.32% with perfect shuffle traffic, and about 92.98% with the bit-compliment traffic at the zero load latency.

This paper proposes a multi-strategy seeker optimization algorithm (MSSOA) for optimization constrained engineering problems. In this paper, three strategies were adopted to improve the poor searching capability of the seeker optimization algorithm (SOA). The first strategy was triple black hole system capture to solve the local optima issue. The second and third strategies were the multi-dimensional random interference and the precocious interference to balance the exploration and exploitation processes. These three strategies are proposed to improve respectively the SOA algorithm, and compared with the three strategies to improve together the SOA algorithm for optimizing 15 benchmark functions; the way these three strategies work together is called multi-strategy; and the efficiency of the multi-strategy is illustrated the numerical optimizing results and the convergence curves, population’s positions with iterations and the search history of the benchmark functions. The proposed multi-strategy method achieved better performance in optimizing of the benchmark functions compared to other six optimization methods. The numerical and experimental results analysis were observed with respect to the optimal solution curve, the convergence curve of the fitness function, the ANOVA tests, the calculation complexity of the algorithm, the running time of the algorithm routine, the exploration and exploitation capability, the Wilcoxon’s rank-sum test, the performance profile of algorithm. The results showed that the proposed multi-strategy method was efficient in the benchmark functions. The proposed multi-strategy method also achieved better performance in optimizing of the engineering problems and provided better solutions compared to other six optimization methods.

The Grid-Connected Droop-Controlled Distributed Generations (GCDCDGs) are widely used in power systems. However, their power flow is very sensitive to the Upstream Grid (UG) frequency and voltage magnitude fluctuations. This paper focuses on the power and current limiting of inverter-interfaced GCDCDGs under UG frequency and/or voltage magnitude drops. GCDCDG output power and current increase under the UG frequency drop, and if this increase exceeds the maximum of them, current limiters are saturated and according to $P\sim \omega $ droop characteristic the GCDCDG frequency does not track the UG frequency, and this frequency difference leads to power oscillation between DG and UG and the system becomes unstable. In this paper, a new strategy based on the droop-control method is proposed to limit the output power and current of GCDCDGs without using a current limiter that realizes a stable operation under the mentioned conditions. In the proposed method instead of increasing the droop coefficients to limit $P$ and $Q$ at their constraints, the droop curves move down after powers and currents exceed maximum values, using two supplementary control signals. The performance of the proposed method is demonstrated with simulation results using MATLAB/Simulink environment under several case studies.

In a distributed database environment, multi-join query optimization is one of the key factors affecting database performance. Genetic algorithms have a good application in dealing with this type of problem. However, the traditional genetic algorithm has the problems of low efficiency and easily falls into the precocity when dealing with query optimization, which is mainly caused by the lack of population diversity. Therefore, this paper sets up a mathematical model for distributed database query optimization and proposes an adaptive genetic algorithm based on double entropy. We introduced a genetic algorithm with two types of entropy: genotype and phenotype. Genotype entropy was used to optimize the distribution of the initial population, ensuring that the initial population has good population diversity. Phenotype entropy is used to optimize the genetic strategy, which can be divided into individual entropy and population entropy. Individual entropy is used to optimize the selection strategy, and population entropy is used to optimize the crossover and mutation operators to maintain the population diversity in the iteration process and accelerate the speed of iteration. The experimental results show that the algorithm proposed in this paper is effective for query optimization of a distributed database.

This paper considers the stability and L2- $\text{L}_\infty $ control problem for It $\hat {o}$ stochastic systems with the sawtooth-like input delay. Compared with previously-known results on systems with the sawtooth-like input delay, a new auxiliary system is introduced to reduce the conservatism of the system. Besides, the influence of stochastic noises is investigated. For the delayed stochastic system without the disturbance, an LMI type mean-square asymptotical stability criterion is derived by using the Bessel-Legendre stochastic inequality and a modified finite-interval quadratic polynomial inequality. Then a linear feedback controller is proposed to realize the stability of the system with a prescribed L2- $\text{L}_\infty $ performance under the influence of disturbances, where the controller gain matrix is designed by introducing slack variables. To be pointed out that the augmented Lyapunov-Krasovskii functional (LKF) used in this paper is new, which is constructed by introducing an auxiliary system to increase the delay-dependent function terms in the discriminant. Finally, two numerical examples are given to show the validness and effectiveness of the theoretical results.