Search

Background/Objectives : Patient-specific instrumentation (PSI) in total knee arthroplasty (TKA) uses preoperative three-dimensional imaging to create cutting blocks tailored to patient anatomy. However, there is debate regarding the additional benefits of PSI in terms of improved alignment or functional outcomes compared to using conventional instruments. Although PSI design has undergone continuous development, the improvements have not been incorporated. Therefore, the aim of this study was to compare the surgical time and radiological outcomes between advanced-design PSI and conventional instruments. Methods : We conducted a retrospective review of 328 patients who underwent primary TKAs using PSI for osteoarthritis and compared them with 328 matched patients who underwent TKA performed with conventional instruments during the same period (March 2023 to August 2024). We compared the surgical time and component alignment between the advanced-design PSI group and the conventional instrument group. Results : The average surgical time was significantly shorter in the advanced-design PSI group (47.6 ± 12.4 min) compared to the conventional instrument group (59.2 ± 14.2 min, p < 0.05). The advanced PSI design group had a significantly lower occurrence of outliers in hip-knee-ankle alignment (7%) compared to the conventional instrument group (36.3%). This trend was also observed in femoral coronal alignment, tibial coronal alignment, and femoral sagittal alignment. Conclusions : The use of advanced-design PSI demonstrated significantly reduced surgical time and improved alignment compared to conventional instruments. This highlights that proper design is a key factor for PSI to achieve superior biomechanical effects. Our study shows that advanced-design PSI technology has the potential to replace conventional instruments in TKA, though further research is required to determine its clinical outcomes and economic benefits.

Purpose: Various assistive techniques, such as conventional cutting instruments (CON), computer-assisted navigation systems (CAS), patient-specific instruments (PSI) and robot-assisted systems (RAS), have been developed and applied in primary total knee arthroplasty (TKA). In this study, we aimed to assess the relative accuracy and efficacy of several assistive techniques for TKA through a network meta-analysis (NMA) based on multiple published randomized controlled trials (RCTs)., Methods: The PubMed, EMBASE and Cochrane databases were searched for RCTs to conduct this NMA from inception to 1 January 2024. We combined direct and indirect comparisons using a Bayesian NMA framework to assess and compare the effects of different assistive techniques on radiological and clinical outcomes. An NMA was conducted, and the study protocol was published online at PROSPERO (CRD42023402882)., Results: One hundred and twelve RCTs involving 14,968 TKAs with four different assistive techniques (CON, CAS, PSI and RAS) were evaluated. Inconsistency and heterogeneity were acceptable for most outcomes. Based on the surface under the cumulative ranking curve, RAS could be the best technique for accurate mechanical axis alignment and component position, followed by CAS, PSI and CON. We observed no difference in clinical outcome scores. Additionally, CAS was the best intervention for visual analogue scale scores, and PSI had the shortest operative time. No significant differences were observed in postoperative complications, range of motion or total blood loss., Conclusion: RAS was most likely to achieve an accurate alignment, followed by CAS, PSI and CON. No differences were observed in clinical outcome scores and postoperative complications among the four assistive techniques., Level of Evidence: Level I (systematic review of Level-I randomized controlled studies)., Competing Interests: The authors declare no conflicts of interest., (© 2024 The Author(s). Journal of Experimental Orthopaedics published by John Wiley & Sons Ltd on behalf of European Society of Sports Traumatology, Knee Surgery and Arthroscopy.)

Introduction: This study conducted a Bayesian network meta-analysis (NMA) to compare the imaging and functional outcomes of patient-specific instrument-assisted unicompartmental knee arthroplasty (P-UKA), robot-assisted unicompartmental knee arthroplasty (R-UKA), and conventional unicompartmental knee arthroplasty (C-UKA)., Materials and Methods: A comprehensive search was performed on five electronic databases and major orthopedic journals as of September 24, 2023. We included randomized controlled studies featuring at least two interventions of P-UKA, R-UKA, or C-UKA. Primary outcomes encompassed the deviation angle of hip-knee-ankle angle, as well as the coronal and sagittal plane alignment of femoral and tibial components. Secondary outcomes included patient-reported outcome measures (PROM), surgery time, revision rate, and complication rate. Bayesian framework was employed for risk ratio (RR) or mean deviation (MD) analysis, and treatment hierarchy was established based on rank probabilities., Results: This NMA included 871 knees from 12 selected studies. In sagittal plane, R-UKA exhibited a significantly reduced deviation angle of femoral component compared to P-UKA (MD: 4.16, 95% CI: 0.21, 8.07), and of tibial component in comparison to C-UKA (MD: -2.45, 95% CI: -4.20, -0.68). Notably, the surgery time was significantly longer in R-UKA than in C-UKA (MD: 15.98, 95% CI: 3.11, 28.88). However, no significant differences were observed in other outcomes., Conclusion: Compared with P-UKA or C-UKA, R-UKA significantly improves the femoral and tibial component alignment in the sagittal plane, although this does not translate into discernible differences in functional outcomes. Comprehensive considerations of economic and learning costs are imperative for the judicious selection of the appropriate procedure., Competing Interests: Declarations. PROSPERO registered ID: CRD42023468418. Conflict of interest: No benefits in any form have been received or will be received from a commercial party related directly or indirectly to the subject of this article., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Purpose: The step-cut osteotomy has been recognized as a valuable approach for addressing cubitus varus deformity, albeit one that necessitates technical proficiency. This study aims to evaluate the efficacy of the modified step-cut osteotomy technique in conjunction with patient-specific instruments by clinical and radiological assessment., Methods: We conducted a retrospective review of patients who underwent modified step-cut osteotomy with the use of patient-specific instruments in conjunction with Kirschner wires fixation for the correction of cubitus varus deformity between April 2016 and April 2022. Follow-up was performed for a minimum of two years, during which pre-operative and post-operative clinical and radiological parameters were compared., Results: Fifteen patients were enrolled in this study. The mean pre-operative humeral-elbow-wrist (HEW) of the affected side was -21.7° (ranging from -14° to -34°), while the normal side was 9.4° (ranging from 5° to 15°). The post-operation HEW of affected side was 9° (ranging from 4° to 16°). There was no significant difference between the normal side and affected side after operation (p = 0.74). Pre-operative range of motion in the affected side was 130°, while the post-operative range of motion was 132°. Fourteen patients (93.3%) were pleased with the overall appearance of their elbow. None lazy-S deformity was observed in these cases. There were no major complications., Conclusion: The modified step-cut osteotomy technique, utilizing patient-specific instrument in conjunction with Kirschner wires fixation was found to be a safe, reliable, and technically easy procedure for correcting cubitus varus deformity., (© 2024. The Author(s) under exclusive licence to SICOT aisbl.)

Aims: Primary malignant bone tumor of the pelvis is an uncommon lesion, the resection of which via freehand osteotomy is subject to inaccuracy due to its three-dimensional anatomy. Patient-Specific Guides (PSG), also called Patient-Specific Instruments (PSI) are essential to ensure surgical planning and resection adequacy. Our aim was to assess their use and effectiveness., Methods: A monocentric retrospective study was conducted on 42 adult patients who underwent PSG-based resection of a primary malignant bone tumor of the pelvis. The primary outcome was the proportion of R0 bone margins. The secondary outcomes were the proportion of overall R0 margins, considering soft-tissue resection, the cumulative incidence of local recurrence, and the time of production for the guides. A comparison to a previous series at our institution was performed regarding histological margins., Results: Using PSGs, 100% R0 safe bone margin was achieved, and 88% overall R0 margin due to soft-tissue resection being contaminated, while the comparison to the previous series showed only 80% of R0 safe bone margin. The cumulative incidences of local recurrence were 10% (95% CI: 4-20%) at one year, 15% (95% CI: 6-27%) at two years, and 19% (95% CI: 8-33%) at five years. The median overall duration of the fabrication process of the guide was 35 days (Q1-Q3: 26-47) from the first contact to the surgery date., Conclusions: Patient-Specific Guides can provide a reproducible safe bony margin., (© 2024. The Author(s).)

Periacetabular osteotomy is the gold standard treatment for acetabular dysplasia. The great variability of acetabular dysplasia requires a personalized preoperative planning improved by 3D reconstruction and computer-assisted surgery. To plan the displacement of the acetabular fragment by a pelvic osteotomy, it is necessary to define a reference plane and a method to characterize 3D acetabular orientation. A scoping review was performed on PubMed to search for articles with a method to characterize the acetabulum of native hips in a 3D reference frame. Ninety-eight articles out of 3815 reports were included. Three reproducible reference planes were identified: the anterior pelvic plane, the Standardization and Terminology Committee plane used in gait analysis, and the sacral base plane. The different methods for 3D analysis of the acetabulum were divided in four groups: global orientation, triplanar measurements, segmentation, and surface coverage of the femoral head. Two methods were found appropriate for reorientation osteotomies: the global orientation by a vector method and the triplanar method. The global orientation method relies on the creation of a vector from the acetabular rim, from the acetabular surface or from successive planes. Normalization of the global acetabular vector would correct acetabular dysplasia by a single alignment maneuver on an ideal vector. The triplanar method, based on angle measurements at the center of the femoral head, would involve correction of anomalies by considering axial, frontal, and sagittal planes. Although not directly fit for reorientation, the two others would help to candidate patients and verify both planning and postoperative result.

(1) Background: Orthopedic surgery has been transformed by 3D-printed personalized instruments (3DP-PSIs), which enhance precision and reduce complications. Hospitals are adopting in-house 3D printing facilities, using cost-effective methods like Fused Deposition Modeling (FDM) with materials like Polylactic acid (PLA) to create 3DP-PSI. PLA's temperature limitations can be overcome by annealing High-Temperature PLA (ann-HTPLA), enabling steam sterilization without compromising properties. Our study examines the in vivo efficacy of ann-HTPLA 3DP-PSI in pediatric orthopedic surgery. (2) Methods: we investigated safety and efficacy using ann-HTPLA 3DP-PSI produced at an "in-office" 3D-printing Point-of-Care (3DP-PoC) aimed at correcting limb deformities in pediatric patients. Data on 3DP-PSI dimensions and printing parameters were collected, along with usability and complications. (3) Results: Eighty-three ann-HTPLA 3DP-PSIs were utilized in 33 patients (47 bone segments). The smallest guide used measured 3.8 cm 3 , and the largest measured 58.8 cm 3 . Seventy-nine PSIs (95.2%; 95% C.I.: 88.1-98.7%) demonstrated effective use without issues. Out of 47 procedures, 11 had complications, including 2 infections (4.3%; 95% CI: 0.5-14.5%). Intraoperative use of 3DP-PSIs did not significantly increase infection rates or other complications. (4) Conclusions: ann-HTPLA has proven satisfactory usability and safety as a suitable material for producing 3DP-PSI in an "in-office" 3DP-PoC.

Background: The use of 3D-printed Patient-Specific Instruments (PSI) has been investigated to enhance the postoperative functional results in total hip arthroplasty (THA) and has been recognized as an innovative approach for the optimal alignment of hip implant components. Point-of-care production is gradually becoming the norm for PSI manufacturing. The purpose of this article is to assess the accuracy and safety of PSI for total hip arthroplasty performed at the point-of-care in Vietnam., Methods: 34 THA cases were assessed in this prospective study. A template for the size and orientation of the implant and the design of the PSI was generated using data from preoperative 3D computed tomography (CT) scanning of the lower limb. The principal surgeon determined the implants' position and PSI design directly using the software. The PSI is then produced using a 3D-compatible resin printer in our manufacturing hospital. The PSI, consisting of an acetabulum and a femoral component placed press-fit on the bony surface, guided surgeons to precisely ream the acetabulum and cut the femoral neck according to the pre-planned plane. Postoperative CT scanning was obtained and superimposed onto the 3D model of the implant to evaluate the accuracy of the procedure by comparing the orientation values of the cup and the alignment of the stem between the planned and the actual results. Intra- and postoperative clinical parameters of surgery, including surgical time, intra-operative blood loss, complications, and the first ambulation, were also recorded to evaluate the safety of the surgery., Results: The preparation for PSI required an average of 3 days. 94% of cup size and 91% of stem size were correctly selected. The mean values of postoperative inclination and anteversion were 44.2° ± 4.1° and 19.2° ± 5.6°, respectively. 64.7% of cases deviated from planned within the ± 5 0 range and 94.1% within the ± 10° range. There was no significant statistical difference between the planned and the achieved values of stem anteversion, osteotomy height, and leg length discrepancy (p > 0.05). The average surgical time was 82.5° ± 10.8 min, and the intraoperative blood loss was estimated at 317.7° ± 57.6 ml. 64.7% of patients could walk on the day of surgery. There were no complications reported., Conclusions: The point-of-care manufactured PSI is a useful solution for improving the accuracy of total hip arthroplasty surgery, especially in restoring implant orientation and reducing leg length discrepancy. However, long-term clinical follow-up evaluation is needed to confirm the efficacy and safety of this approach., (© 2023. The Author(s).)

Background: In kinematically aligned total knee arthroplasty (KA-TKA), the cylindrical axis (CA) is very important in restoring the native joint line and kinematics of the pre-arthritic knee. This study aimed to determine the accuracy of patient-specific instrument (PSI) for restoring the CA for femoral bone resection in KA-TKA., Methods: Thirty KA-TKAs were performed using a computed tomography (CT)-based PSI system. Data from preoperative CT were reconstructed into three-dimensional (3D) models using 3D-planning software. The CA was created by connecting the centers of each virtual sphere to the medial and lateral femoral condyles using computer software. Femoral bone resection of the distal and posterior condyles was performed parallel to the sagittal planes of the CA. The thickness of the CA-referenced bone resection was determined based on the thickness necessary for the respective regions of the femoral component. The PSI was manufactured to locate the guide pin for a conventional cutting block. The accuracy of PSI for KA-TKA was evaluated as the absolute error between the preoperatively predicted thickness and the intraoperative measurements in each of the four regions, as well as the difference in error between distal-medial (DM) and posterior-medial (PM) and between distal-lateral (DL) and posterior-lateral (PL)., Results: The differences in thickness of bone cut in the DM, DL, PM, and PL were 0.79 ± 0.39 mm (range, -1.20 to 1.50), 0.70 ± 0.42 mm (range, -1.50 to 1.50), 0.80 ± 0.46 mm (range, -0.80 to 1.50), and 0.75 ± 0.47 mm (range, -2.10 to 1.40), respectively. There was no significant difference in the thickness error between DM and PM ( p = 0.959) and between DL and PL ( p = 0.812)., Conclusions: In KA-TKA, PSI was effective for accurate femoral bone resection based on virtually planned thickness., Competing Interests: CONFLICT OF INTEREST: No potential conflict of interest relevant to this article was reported., (Copyright © 2023 by The Korean Orthopaedic Association.)

Background: Patient-specific instrumentation (PSI) has the potential to improve the accuracy of implant positioning in total hip arthroplasty (THA). This prospective clinical study aimed to develop artificial intelligence to increase PSI production efficiency and assess accuracy, clinical outcomes, and learning curves., Methods: A convolutional neural network was applied to automatically process computer tomography images. PSI size and position were designed to guide the acetabular preparation and femoral neck resection. Thirty patients who underwent PSI-assisted THAs were matched to thirty patients who underwent free-hand THAs, and the component positions, as well as radiographic and clinical outcomes were analyzed., Results: PSI-assisted THA was significantly more accurate than free-hand THA at achieving the target component position. The mean absolute errors of cup inclination (P = .004) and anteversion (P < .001) were significantly smaller in the PSI group with fewer outliers. Calcar length (P = .002) and neck length (P = .026) were also more accurate in the PSI group. The leg length discrepancy was significantly lower in the PSI group (P = .002). There were no significant differences in operation time, blood loss, leg length discrepancy, or cup position among the first, second, and last 10 cases., Conclusion: PSI-assisted THA offered more accurate component positions and better radiographic outcomes than free-hand THA. There was no evidence of a learning curve. Our findings suggest that PSI is a convenient and practical option to help surgeons achieve accurate surgical outcomes., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Background: The aim of this study was to evaluate the precision and feasibility of patient-specific instruments (PSI) in total hip arthroplasty (THA) as compared to the traditional free-hand (FRH) approach., Methods: During the period of January 1, 2021 to December 31, 2022, a randomized allocation was used for patients receiving unilateral primary THA to either the PSI or conventional operation group. The placement and size of the PSI were specifically chosen to guide femoral neck resection and prosthesis implantation. The study analyzed component positions and evaluated radiographic and clinical outcomes in 30 patients who received PSI-assisted THAs and 30 patients who received FRH THAs. This study was registered at China Clinical Trial Registry (number: ChiCTR2300072325) on June 9th, 2023., Results: The use of PSI in THA resulted in significantly higher precision in achieving the desired component position as compared to the FRH approach. The PSI group showed significantly smaller absolute errors of femoral anteversion (p < 0.001). No significant differences were found in operation time, intra-operative blood loss, hospitalization duration, or time to walk after surgery., Conclusion: In conclusion, the application of patient-specific instruments in THA provides a simple and reliable solution to enhance the precision of femoral prosthesis placement with high accuracy and feasibility. This study highlights the potential benefits of using the PSI in THA., (© 2023. BioMed Central Ltd., part of Springer Nature.)

Three-dimensional (3D) printing technology has proven to have many advantages in spine and sacrum surgery. 3D printing allows the manufacturing of life-size patient-specific anatomic and pathologic models to improve preoperative understanding of patient anatomy and pathology. Additionally, virtual surgical planning using medical computer-aided design software has enabled surgeons to create patient-specific surgical plans and simulate procedures in a virtual environment. This has resulted in reduced operative times, decreased complications, and improved patient outcomes. Combined with new surgical techniques, 3D-printed custom medical devices and instruments using titanium and biocompatible resins and polyamides have allowed innovative reconstructions., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: Computer-assisted preoperative planning, combined with PSI has become an effective technique for treating complex limb deformities. The purpose of this study was to evaluate the efficacy and safety of the novel technique in corrective osteotomy for intra-articular varus ankle deformities associated with osteoarthritis and ankle instability., Methods: Nineteen patients with intra-articular varus ankle arthritis were reviewed between April 2017 and June 2019, including ten men and nine women with a mean age of 58.3 ± 9.9 years (range, 38 to 76 years). All patients underwent intra-articular opening wedge osteotomy assisted by 3D virtual planning and PSI. Weight-bearing radiographs were used to assess the radiographic results, including TAS angle, TT angle, TMM angle, TC angle, TLS angle, opening-wedge angle, and wedge height. Functional outcomes were assessed by the AOFAS score, VAS score, and ROM of the ankle., Results: The average follow-up time was 32.2 ± 9.0 months (range, 22 to 47 months). The average union time was 4.4 ± 0.9 months (range, 3.0 to 6.5 months). The TAS angle significantly changed from 84.1 ± 4.6° preoperatively to 87.7 ± 3.1° at the 1-year follow-up and 86.2 ± 2.6° at the latest follow-up. Similarly, the TT angle, TMM angle and TC angle changed significantly at the 1-year follow-up compared with the preoperative assessment and remained stable until the last follow-up. However, the TLS was not corrected significantly. The postoperative obtained opening-wedge angle, and wedge height showed no significant change with preoperative planning. The overall complication rate was 15.8%. The mean VAS score improved from 5.3 ± 0.6 to 2.7 ± 0.7. The mean AOFAS score improved from 56.2 ± 7.6 to 80.6 ± 4.6. However, the ROM showed no significant change., Conclusions: Accurate correction and satisfactory functional recovery were attained with computer-assisted planning and PSI in the corrective osteotomy of intra-articular varus ankle deformities., (© 2022. The Author(s).)

Background: Opening wedge high tibial osteotomy (OWHTO) is an effective surgical treatment for knee osteoarthritis. This study aimed to explore the feasibility and accuracy of a novel 3D-printed patient-specific instrument (PSI) based on "H-point" for medial OWHTO in a prospective cadaver study., Methods: Twenty-six fresh-frozen lower limbs were collected and randomly divided into two groups: PSI group treated with 3D virtual preoperative planning and a novel 3D-printed PSI; control group with the standard technique. 3D models were reversely reconstructed for preoperative surgical planning, guide plate design, and simulated osteotomy. Anatomic features of "H-point," surgical time, fluoroscopic dose, correction accuracy including tibiofemoral angle (FTA) and posterior tibial slope (TS) angle were measured., Results: First, H-point was always described as a bony bulge in the posteromedial to the proximal tibia and had a relatively constant relationship with the osteotomy site. Second, the absolute correction error of mFTA and TS were significantly smaller in the PSI group. The effective rate of TS in the PSI group was more concentrated with absolute correction error within 1° and within 2° for 53.3% and 93.3%, compared to 9.1% and 45.5% in the control group. The total operation time, positioning osteotomy time, distraction correction time and fluoroscopy dose in the PSI group were significantly less than those in the control group., Conclusions: The novel 3D-printed PSI based on H-point is feasibility and accuracy with advantages in terms of TS, surgery time and radiation dose for OWHTO., (© 2022. The Author(s).)

Objective: High tibial osteotomy (HTO) has been used for the treatment of patients with knee osteoarthritis. However, the successful implementation of HTO requires precise intraoperative positioning, which places greater requirements on the surgeon. In this study, we aimed to design a new kind of 3D-printed patient-specific instrument (PSI) for HTO, including a positioning device and an angle bracing spacer, and verify its effectiveness using cadaveric specimens., Methods: This study included ten fresh human lower-limb cadaveric specimens. Computed tomography (CT) and X-ray examinations were performed to make preoperative plans. PSI was designed and 3D-printed according to the preoperative plan. Then, the PSI was used to guide HTO. Finally, we performed X-ray and CT after the operation to verify its validity and accuracy., Results: The PSI using process was adjusted according to the pre-experimental procedure in 1 case. Hinge fracture occurred in 1 case. According to X-rays of the remaining eight cadaveric specimens, no statistically significant difference was noted between the preoperative planning medial proximal tibial angle (MPTA) and postoperative MPTA (P > 0.05) or the preoperative and postoperative posterior slope angle (PSA) (P > 0.05). According to the CT of 10 cadaveric specimens, no statistically significant difference was noted between the design angle and actual angle, which was measured according to the angle between the osteotomized line and the cross section (P > 0.05). The gap between the designed osteotomy line and the actual osteotomy line was 2.09 (0.8 ~ 3.44) mm in the coronal plane and 1.58 (0.7 ~ 2.85) mm in the sagittal plane., Conclusion: This 3D-printed PSI of HTO accurately achieves the angle and position of the preoperative plan without increasing the stripping area. However, its use still requires a certain degree of proficiency to avoid complications, such as hinge fracture., (© 2022. The Author(s).)

Background: Intra-articular fractures are associated with posttraumatic arthritis if inappropriately treated. Exact reduction of the joint congruency is the main factor to avoid the development of arthrosis. Aim of this study was to evaluate feasibility of computer-assisted surgical planning and 3D-printed patient-specific instrumentation (PSI) for treatment of distal intraarticular radius fractures., Method: 7 Patients who suffered a distal intraarticular radius fracture were enrolled in this prospective case series. Preoperative CT-scan was recorded, whereupon a 3D model was computed for surgical planning and design of PSI for surgical navigation. Postoperative accuracy and joint congruency were assessed. Patients were followed-up 3, 6 and 12 months postoperatively., Results: Mean follow-up was 16 months. Over all range of motion was restored and flexion, extension and pronation showed significant recovery, p < 0.05. Biggest intraarticular joint step-off and gap reduced from average 2.49 (± 1.04) to 0.8 mm (± 0.44), p < 0.05 and 6.12 mm (± 1.04) to 2.21 mm (± 1.16), p < 0.05. Average grip strength restored (3-16 months) from 20.33 kg (± 7.12) to 39.3 kg (± 19.55) p < 0.05, 100% of the healthy contralateral side. 3D-accuracy for guided fragments was 2.07 mm (± 0.64) and 8.59° (± 2.9) and 2.33 mm (± 0.69) and 12.86° (± 7.13), p > 0.05 for fragments reduced with ligamentotaxis., Conclusion: Computer-assisted and PSI navigated intraarticular radius fracture treatment is feasible, safe and accurate. The benefits of this method, however, do not outstand the additional effort., Level of Evidence: IV., (© 2021. The Author(s).)

Osteoid osteomas are benign bone-forming lesions that usually present in adolescence. In patients with severe pain and those not responding to medication, surgical treatment should be considered. Medulloscopy is a standard arthroscopic technique for visualizing the intramedullary canal of the tibia. Herein, we report two patients with intramedullary osteoid osteomas in the posterior area of the tibia, which were successfully treated using medulloscopy. Hence, medulloscopy is an effective minimally invasive method in patients with intramedullary osteoid osteomas in the posterior tibial area.

Objective: To compare the perioperative blood loss in patients undergoing a total knee arthroplasty (TKA) across three different techniques: computer-assisted navigation surgery (CAS), patient specific instrumentation (PSI) and conventional instrumentation (CI). Methods: Ninety consecutive patients with severe knee osteoarthritis who underwent unilateral primary TKA in Peking University Third Hospital Orthopedics Department from January 2018 to December 2018 were enrolled in this prospective study. The patients were randomly divided into three groups (30 case in each group): CAS-TKA group, PSI-TKA group and CI-TKA group. The study measured intraoperative blood loss, total blood loss, hidden blood loss, decreases of hemoglobin and hematocrit, and the post-TKA blood transfusions in the three groups. One-way ANOVA was used to detect the differences among the cohorts, and LSD was used for the post-hoc test. Results: The overall intraoperative blood loss of all patients was 6 ml (5~8 ml). The mean total blood loss and hidden blood loss in CAS-TKA group, PSI-TKA group and CI-TKA group was (1 147.0±301.8) and (1 140.1±301.9)ml, (1 044.3±454.1) and (1 038.5±454.0)ml, (1 154.0±483.6) and (1 145.3±482.7)ml, respectively; there was no significant differences among the three groups ( F= 0.639, 0.616, both P> 0.05). There were no patients who received allogeneic blood transfusion. There were no significant differences in decrease of hemoglobin and hematocrit among the three groups neither (both P> 0.05). Conclusions: Compared with conventional TKA, CAS and PSI does not increase the total blood loss of TKA. However, they both demonstrate a potential benefit in reducing blood loss of TKA.

Background: Unsatisfactory alignment in unicompartmental knee arthroplasty (UKA) is one potential cause of postoperative failure. Patient-specific instruments (PSIs) are designed to improve the alignment of the prostheses, but the effect of PSIs on the alignment or clinical outcome is controversial and lacks validated evidence. We conducted a meta-analysis and systematic review to determine the effect of PSIs on UKA outcomes for the first time., Materials and Methods: A systematic literature search in MEDLINE, EMBASE, CNKI (Chinese database) and Cochrane Central Register of Controlled Trials (up to June 2019) was performed to collect studies that compared PSIs with conventional instruments. Two reviewers independently screened all the records on the basis of inclusion and exclusion criteria. Quality assessments with Cochrane's quality assessment tool or Newcastle-Ottawa scale (NOS) were conducted, the data were extracted, and statistical analyses were completed., Results: Ten studies with 444 knees were included. The meta-analysis confirmed that PSIs contributed to reduced errors in the alignment of the femoral compartment in the sagittal plane (mean difference = - 2.53, CI [- 3.14, - 1.99], P < 0.01) and the tibial compartment in both the coronal (mean difference = - 0.97, CI [- 1.44, - 0.49], P < 0.01) and the sagittal plane (mean difference = - 1.29, CI [- 1.81, - 0.76], P < 0.01). One study supported that PSIs reduced outliers in inexperienced surgeons; however, all studies investigating PSIs among experienced surgeons suggested that PSIs cannot reduce the percentage of outliers. There was no significant difference in the postoperative score (mean difference = - 0.06, CI [- 0.36, 0.23], P = 0.68) or rate of complications (RR = 1.02, CI [0.15, 6.79], P = 0.99) between PSIs and conventional instruments., Conclusion: The findings of this study suggest PSIs could not reduce the percentage of outliers in UKA patients for experts, and postoperative scores and complication rates are not improved by PSIs, compared with conventional instruments. Based on this meta-analysis and systematic review, no practical benefit to UKAs in experts was detected in PSIs. The findings of this study also suggest that PSIs improved alignment of UKA and might be beneficial to inexperienced surgeons, but it is still unclear whether this improvement is clinically significant and the evidence of inexperienced surgeons is limited. Therefore, more high-quality RCTs are need to be carried out in the future.

Purpose: To create a patient-specific instrument (PSI) in lowering the surgical experience requirement for junior physicians to perform total hip arthroplasty (THA) on developmental dysplasia of the hip (DDH) patients., Methods: Combined with rapid prototyping technology, we created a PSI and established DDH hip model in vitro. We enrolled 48 junior physicians and randomly assigned them into two groups. After creation of the PSI, they performed simulated THA surgery on a full-scale hip model with or without PSI on DDH models. The planned prothesis orientation, post-operative prothesis orientation, and surgery time were recorded., Results: The final cup inclination was 42.0 ± 0.8° in PSI group and 37.8 ± 2.0° in control group, while final cup anteversion was 16.0 ± 0.7° in PSI group and 24.7 ± 3.5° in control group. The △inclination in PSI group was smaller than that in control group (4.2 ± 0.5° vs 9.5 ± 1.4°, P < 0.01), so does △inclination (2.9 ± 0.4° in PSI group vs 15.2 ± 2.5° in control group, P < 0.01). The outlier percent was 8.3% in PSI group and 70.8% in control group (P < 0.01). At the same time, the PSI group did not prolong the operation time (P = 0.551)., Conclusion: The PSI can greatly increase the accuracy of placing the cup orientation and lower the threshold for junior physicians to perform THA on DDH patients. It could be a training tool for them to increase their THA surgical skills.

Background: Traditional methods for minimally invasive internal fixation (MIIF) of calcaneal fractures require extensive intraoperative fluoroscopy, and fracture recovery is usually not ideal. We developed a new surgical procedure using digital surgical simulation and constructed a patient-specific instrument (PSI) for calcaneal fracture that we used during the operation. This study investigated whether PSI-assisted MIIF of calcaneal fracture enables rapid and accurate execution of the preoperative plan., Methods: We retrospectively analyzed patients with Sanders type III or IV fresh calcaneal fractures who had undergone PSI-assisted MIIF at our hospital from January 2016 to December 2018. We analyzed perioperative data including intraoperative fluoroscopy time, concurrence of internal fixation actual usage (IFAU) with the preoperative plan, surgery time, and complications. We also compared pre- and postoperative actual measurements from X-ray radiographs and computed tomography images including Böhler, Gissane, and calcaneus valgus angles; subtalar joint width; and calcaneal volume overlap ratio with the preoperative design. All patients had been followed up and their American Orthopedic Foot and Ankle Score (AOFAS) score was available., Results: Mean intraoperative fluoroscopy time was 3.95 ± 1.78 h; IFAU in 16 patients (16 ft) was the same as the preoperative plan; mean surgery time was 28.16 ± 10.70 min; and none of the patients developed complications. Böhler, Gissane, and calcaneus valgus angles and subtalar joint width did not differ between pre- and postoperative plans; however, the actual preoperative values of each of these parameters differed significantly from those measured postoperatively. The calcaneal volume overlap ratio with the preoperative design was 91.2% ± 2.3%. AOFAS scores increased with time, with significant differences in the score at each time point., Conclusions: The newly developed PSI-assisted calcaneal fracture MIIF method can rapidly and accurately execute the preoperative plan.

Kinematically aligned total knee arthroplasty (TKA) is a new alignment technique. Kinematic alignment corrects arthritic deformity to the patient's constitutional alignment in order to position the femoral and tibial components, as well as to restore the knee's natural tibial-femoral articular surface, alignment, and natural laxity. Kinematic knee motion moves around a single flexion-extension axis of the distal femur, passing through the center of cylindrically shaped posterior femoral condyles. Since it can be difficult to locate cylindrical axis with conventional instrument, patient-specific instrument (PSI) is used to align the kinematic axes. PSI was recently introduced as a new technology with the goal of improving the accuracy of operative technique, avoiding practical issues related to the complexity of navigation and robotic system, such as the costs and higher number of personnel required. There are several limitations to implement the kinematically aligned TKA with the implant for mechanical alignment. Therefore, it is important to design an implant with the optimal shape for restoring natural knee kinematics that might improve patient-reported satisfaction and function., Competing Interests: The authors have no potential conflicts of interest to disclose., (© Copyright: Yonsei University College of Medicine 2020.)

Background: Limb salvage surgery for pelvic bone sarcoma carries a very high risk of local recurrence. Patient-specific instruments (PSIs) have shown promise for obtaining tumour-free resection margins. However, no data are available on medium-term outcomes including local recurrence rates after PSI-guided resection. The objectives of this case-control study were to determine whether PSI-guided resection: 1) was associated with a lower local recurrence rate, 2) allowed a shorter operative time, 3) was associated with better-quality allograft reconstruction., Hypothesis: PSI-guided resection decreases the local recurrence rate by improving the resection margins in patients with primary pelvic bone sarcomas., Patients and Methods: PSI-guided resection was performed in 9 consecutive patients (cases) with primary pelvic sarcomas (chondrosarcoma, n=3; Ewing's sarcoma, n=3; osteosarcoma, n=1; fibrosarcoma, n=1; and radiation-induced sarcoma, n=1). Age ranged from 11 to 63 years. Outcomes were compared to those in a historical control group of 19 patients with primary bone sarcomas who underwent resection surgery in the same hospital without PSI guidance. The case and control groups were similar regarding age, sex distribution, and follow-up duration. The local recurrence rate and operative time were compared between the two groups. Resection margins were classified as R0, R1, or R2. The quality of allograft reconstruction, which was performed in 7 of the 9 cases, was assessed., Results: After a mean follow-up of 52 months (range, 30-90 months), none of the cases had experienced local bone or soft-tissue recurrences, compared to 7 of the 19 controls (p=0.03), in whom mean follow-up was 62 months (range, 24-134 months). Bone resection margins were R0 in 8 cases; in the remaining patient, R1 resection was performed deliberately to preserve an S1 root. All 9 cases had R0 soft-tissue resection margins. In the control group, bone resection margins were R0 in 13 patients, R1 in 5 patients, and R2 in 1 patient (p=0.47). Mean operative time was similar in the cases (612 minutes [range, 435-854 minutes]) and controls (633 minutes [range, 420-990 minutes]) (p=0.87). In the 7 patients who underwent pelvic allograft reconstruction, allograft contact in the defect and osteosynthesis stability were deemed satisfactory by the surgeon., Discussion: The lower local recurrence rate in the cases demonstrates that the improved resection accuracy provided by PSIs directly influences the risk of local recurrence. In addition, the R0 bone margins in 8 cases establishes that PSIs are effective in improving resection accuracy., Level of Evidence: III, case-control study., (Copyright © 2019. Published by Elsevier Masson SAS.)

Background: It is challenging to create an ideal artificial acetabulum during total hip arthroplasty (THA) in adult DDH. Our team developed a new patient-specific instrument (PSI) that uses the superolateral rim of the acetabulum as a positioning mark to assist in the production of an artificial acetabulum in adult Crowe II/III DDH patients. The purpose of this retrospective study is to verify whether this new PSI can be used to implement the preoperative plan accurately and quickly to create an ideal artificial acetabulum during THA in adult Crowe II/III DDH patients., Methods: We selected suitable adult Crowe II/III DDH patients from the registration system for artificial joint surgery at our hospital during April 2016 to March 2018 who underwent THA assisted by a PSI using the superolateral rim of the acetabulum as a positioning mark. We retrospectively analyzed data, including preoperative and postoperative anteversion, inclination, postoperative bilateral rotator center discrepancy (BRCD), surgery time, and the incidence of neurovascular injury. All patients underwent follow-up, and their Harris hip score (HHS) and X-ray data were recorded. Then, we performed statistical analyses on the data described above., Results: A total of 20 hip surgeries from 17 patients were included in our study. All patients underwent a successful operation assisted by the PSI. The mean anteversion of the cup in our preoperative plan was 15.1° (range, 10.0° to 20.0°), while the mean postoperative anteversion of the cup was 15.3° (range, 7.0° to 28.6°). The mean inclination of the cup in our preoperative plan was 44.7° (range, 40.0° to 50.0°), while the mean postoperative inclination of the cup was 45.6° (range, 35.0° to 57.6°). Paired-samples t test revealed no significant differences in anteversion and inclination between pre- and postoperation times (P > 0.05). The mean BRCD was 3.38 ± 3.0 mm (range, 0.5 to 11.0 mm). The average operation time was 105.1 ± 15.4 min, and no patients had neurovascular injury complications. All patients' acetabular components appeared clinically and radiologically stable after surgery. The mean HHS values were significantly improved at 12 weeks (P < 0.05) and 24 weeks (P < 0.05) postoperatively compared to the preoperative mean scores., Conclusions: The new PSI is accurate and practical to create an ideal artificial acetabulum during THA in adult Crowe II/III DDH patients.

Objective: To compare the surgical time and postoperative coronal mechanical axis alignment in patients with osteoarthritis who were treated with three different total knee arthroplasty (TKA) techniques: computer-assisted navigation surgery (CAS), patient specific instrumentation(PSI) and traditional instrumentation. Methods: A total of 96 patients with severe knee osteoarthritis who underwent unilateral primary TKA by the same surgeon were included in this retrospective study.The patients were divided into CAS-TKA group (34 patients), PSI-TKA group (29 patients) and control group (33 patients) based on surgical techniques used in the operations.The surgical time and postoperative coronal mechanical axis alignment were compared between the three groups.One-way ANOVA was used to detect the differences between three groups, and LSD test was used for the post-hoc test. Results: The overall mean surgical time of the patients was (79±16) min.CAS-TKA group had significantly longer surgical time when compared with those in the other two groups [CAS-TKA vs PSI-TKA: (90±10) min vs (80±14) min, LSD- t =3.458, P <0.05; CAS-TKA vs control: (90±10) min vs (66±11) min, LSD- t =8.350, P <0.05; PSI-TKA vs control: (80±14) min vs (66±11) min, LSD- t =4.582, P <0.05]. The overall mean postoperative coronal mechanical alignment varus/valgus deformity was 2.4° and 2.0°, respectively.The overall outliers (varus/valgus>3°) represented 22.9% of cases and were distributed as followed: 11.8% in CAS-TKA group, 27.6% in PSI-TKA group, 30.3% in control group; and no significant differences was found among the three groups (χ(2)=3.771, P =0.151). Conclusions: The use of CAS or PSI in TKA costs a significant longer surgical time.These two techniques results in acceptable postoperative coronal alignment and both demonstrated a potential benefit in reducing outliers when compared with the traditional instruments.

Musculoskeletal tumours pose considerable challenges for the orthopaedic surgeon during pre-operative planning, resection and reconstruction. Improvements in imaging technology have improved the diagnostic process of these tumours. Despite this, studies have highlighted the difficulties in achieving consistent resection free margins especially in tumours of the pelvis and spine when using conventional methods. Three-dimensional technology - three-dimensional printing and navigation technology - while relatively new, may have the potential to prove useful in the musculoskeletal tumour surgeon's arsenal. Three-dimensional printing (3DP) allows the production of objects by adding material layer by layer rather than subtraction from raw materials as performed conventionally. High resolution imaging, computer tomography (CT) and magnetic resonance imaging (MRI), are used to print highly complex and accurate items. Powder-based printing, vat polymerization-based printing and droplet-based printing are the common 3DP technologies applied. 3DP has been utilized pre-operatively in surgical planning and intra-operatively for patient specific instruments and custom made prosthesis. Pre-operative 3DP models transfer information to the surgeon in a concise yet exhaustive manner. Patient specific instruments are customized 3DP instruments utilized with the intention to easily replicate surgical plans. Complex musculoskeletal tumours pose reconstructive challenges and standard implants are often unable to reconstruct defects satisfactorily. The ability to use custom materials and tailor the pore size, elastic modulus and porosity of the 3DP prosthesis to be comparable to the patient's bone allows for a potential patient-specific prosthesis with unique incorporation and longevity properties. Similarly, navigation technology utilizes CT or MRI images to provides surgeons with real time intraoperative three-dimensional calibration of instruments. It has been shown to potentially allow surgeons to perform more accurate resections. These technological advancements have the potential to greatly impact the management of musculoskeletal tumours. 3D planning models, patient-specific instruments and customized 3DP implants and navigation should not be thought of as separate, but rather, patient-specific adaptation of relevant modes of application should be selected on a case-by-case basis when taking all unique factors of each case into consideration.

Objectives: Single use patient-specific instruments (PSI) for total knee prosthesis are introduced as a new alternative to conventional ancillaries and computer assisted surgery by improving implants positioning. An exhaustive review was carried out to identify their specific characteristics, with their advantages and disadvantages., Methods: Medical devices suppliers were consulted in 2015 for reviewing their PSI. Their technical, clinical and economic data were compared. The results had been submitted to an orthopaedics expert commission of our university hospital for clinical and financial opinion., Results: Ten companies have provided the documentation for the analysis. PSI are manufactured by suppliers using a three dimensional printing method based on CT scans or MRI images. PSI are produced according to the surgeon's preferences after a preliminary data check, which can be performed by the suppliers' engineers, the surgeon and automatic calculation. Five suppliers can produce sterile PSI with optional delivery of 3D bone models. According to the experts, the studies failed to demonstrate the superiority of a PSI or hospital economic gain. The prices listed remain high and operating room time is not always significantly reduced., Conclusions: With the development of personalized medicine, the role of PSI grows in importance. They facilitate the surgeon's work by fully respecting the anatomy. These systems offer an interesting perspective in their technical and pedagogical aspects. But it seems premature to take them into routine use given the low number of high-level studies that were currently done., (Copyright © 2017 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.)

Background: Restoring good alignment after total knee replacement (TKR) is still a challenge globally, and the clinical efficiency of patient-specific instruments (PSIs) remains controversial. In this study, we aimed to explore the value and significance of three-dimensional printing PSIs based on knee joint computed tomography (CT) and full-length lower extremity radiography in TKR., Methods: Between June 2013 and October 2014, 31 TKRs were performed using PSIs based on knee joint CT and full-length lower extremity radiography in 31 patients (5 males and 26 females; mean age: 67.6 ± 7.9 years; body mass index [BMI]: 27.4 ± 3.5 kg/m 2 ). Thirty-one matched patients (4 males and 27 females; mean age: 67.4 ± 7.2 years; mean BMI: 28.1 ± 4.6 kg/m 2 ) who underwent TKR using conventional instruments in the same period served as the control group. The mean follow-up period was 38 months (31-47 months). Knee Society Score (KSS), surgical time, and postoperative drainage volume were recorded. Coronal alignment was measured on full-length radiography., Results: Twenty-three (74.2%) and 20 (64.5%) patients showed good postoperative alignment in the PSI and control groups, respectively, without significant difference between the two groups (χ 2 = 0.68, P = 0.409). The mean surgical time was 81.48 ± 16.40 min and 72.90 ± 18.10 min for the PSI and control groups, respectively, without significant difference between the two groups (t = 0.41, P = 0.055). The postoperative drainage volume was 250.9 ± 148.8 ml in the PSI group, which was significantly less than that in the control group (602.1 ± 230.6 ml, t = 6.83, P < 0.001). No significant difference in the KSS at the final follow-up was found between the PSI and control groups (91.06 ± 3.26 vs. 90.19 ± 3.84, t = 0.95, P = 0.870)., Conclusions: The use of PSIs based on knee joint CT and standing full-length lower extremity radiography in TKR resulted in acceptable alignment compared with the use of conventional instruments, although the marginal advantage was not statistically different. Surgical time and clinical results were also similar between the two groups. However, the PSI group had less postoperative drainage., Competing Interests: There are no conflicts of interest.

Background: Patient-specific instrumentation (PSI) is attracting attention as a mechanical method of ensuring the accuracy of osteotomy during total knee arthroplasty (TKA). Few studies have focused on preoperative plans; thus, it is unclear how often initial plans have to be corrected preoperatively and intraoperatively. We investigated the frequency of corrections, the accuracy of intraoperative osteotomy, and postoperative alignment., Methods: We analyzed 45 knees of 40 patients who underwent TKA using magnetic resonance imaging (MRI)-based PSI. We evaluated the frequency of corrections to preoperative plans and intraoperative corrections for each part. We also evaluated osteotomy error, defined as the difference between the planned and actual thickness of resected bone. Hip-knee-ankle angle (HKA), femoral component angle (FCA), and tibial component angle (TCA) on plain X-rays were evaluated for postoperative alignment., Results: Corrections were made to the initial plans in 91.1% of cases with a mean of 3.3 corrections per knee. Intraoperative corrections were made in 57.8% of cases, with a mean of 0.6 corrections per knee. Mean absolute osteotomy error was around one millimeter, and values were within two millimeters over 80% of cases on most parts except the proximal lateral tibia. In terms of postoperative alignment, HKA was 178.5±1.7°, FCA was 89.0±1.6°, and TCA was 89.4±1.9°. Proportions of outliers were 11.1%, 15.6%, and 20.0%, respectively., Conclusions: Most of the cases required preoperative corrections for planning of PSI. PSI may be useful for ensuring the accuracy of osteotomy and postoperative alignment., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Purpose: A 24-month prospective follow-up study was carried out to compare perioperative clinical outcomes, radiographic limb alignment, component positioning, as well as functional outcomes following total knee arthroplasty (TKA) between patient-specific instrumentation (PSI) and conventional instrumentation (CI)., Methods: Ninety consecutive patients, satisfying the inclusion and exclusion criteria, were scheduled to undergo TKA with either PSI or CI. A CT-based PSI was used in this study, and a senior surgeon performed all surgeries. Patients were clinically and functionally assessed preoperatively, 6 and 24 months post-operatively. Perioperative outcomes were also analysed, including operating time, haemoglobin loss, the need for blood transfusion, length of hospitalisation, and radiographic features., Results: At 24-month follow-up, clinical and functional outcomes were comparable between the two groups. PSI performed no better than CI in restoring lower limb mechanical alignment or improving component positioning. There were no differences in operating time, haemoglobin loss, transfusion rate, or length of hospitalisation between PSI and CI., Conclusion: No significant clinical benefit could be demonstrated in using PSI over CI after 24 months, and routine use of PSI is not recommended in non-complicated TKA., Level of Evidence: II.

Introduction: This study was conducted to determine if the difference in magnetic resonance imaging (MRI)-based 2nd generation patient-specific instrumentation (PSI) design affects post-operative restoration of neutral mechanical alignment in total knee arthroplasty (TKA) compared with the 1st generation PSI design and conventional surgical techniques. In addition, it is aimed at elucidating whether PSI improves surgical efficiency with respect to operating room time, estimated blood loss and the number of instrument trays used intra-operatively., Materials and Methods: We report our experience in TKA using PSI techniques in 234 patients from August 2012 to March 2015. The patients were divided into 1st (n = 64) and 2nd (n = 70) generation PSI design. The control group (n = 100) underwent TKA with the conventional instrument technique., Results: The mean surgical time was significantly shorter in the 2nd generation PSI design (62.1 ± 12.1 min) than in the control group (80.6 ± 21.7 min; P < 0.001). A mechanical axis malalignment of >3° of the lower limb was observed in 5.7% of the patients in 2nd generation PSI design compared with 26.0% of the control group (P = 0.006). No significant difference in mechanical alignment on post-operative long alignment radiography was found between 20.3% of the patients in 1st generation PSI design and the control group (P = 0.584)., Conclusion: The 1st generation PSI design did not have a shorter surgical time or improved alignment compared with conventional instrumentation (CI). However, the use of the perfectly fitted 2nd generation PSI design was associated with improvements in both of these measurements. This study emphasizes the importance of PSI design in intra-operative and post-operative outcomes of TKA.

With advances in both medical imaging and computer programming, two-dimensional axial images can be processed into other reformatted views (sagittal and coronal) and three-dimensional (3D) virtual models that represent a patients' own anatomy. This processed digital information can be analyzed in detail by orthopedic surgeons to perform patient-specific orthopedic procedures. The use of 3D printing is rising and has become more prevalent in medical applications over the last decade as surgeons and researchers are increasingly utilizing the technology's flexibility in manufacturing objects. 3D printing is a type of manufacturing process in which materials such as plastic or metal are deposited in layers to create a 3D object from a digital model. This additive manufacturing method has the advantage of fabricating objects with complex freeform geometry, which is impossible using traditional subtractive manufacturing methods. Specifically in surgical applications, the 3D printing techniques can not only generate models that give a better understanding of the complex anatomy and pathology of the patients and aid in education and surgical training, but can also produce patient-specific surgical guides or even custom implants that are tailor-made to the surgical requirements. As the clinical workflow of the 3D printing technology continues to evolve, orthopedic surgeons should embrace the latest knowledge of the technology and incorporate it into their clinical practice for patient-specific orthopedic applications. This paper is written to help orthopedic surgeons stay up-to-date on the emerging 3D technology, starting from the acquisition of clinical imaging to 3D printing for patient-specific applications in orthopedics. It 1) presents the necessary steps to prepare the medical images that are required for 3D printing, 2) reviews the current applications of 3D printing in patient-specific orthopedic procedures, 3) discusses the potential advantages and limitations of 3D-printed custom orthopedic implants, and 4) suggests the directions for future development. The 3D printing technology has been reported to be beneficial in patient-specific orthopedics, such as in the creation of anatomic models for surgical planning, education and surgical training, patient-specific instruments, and 3D-printed custom implants. Besides being anatomically conformed to a patient's surgical requirement, 3D-printed implants can be fabricated with scaffold lattices that may facilitate osteointegration and reduce implant stiffness. However, limitations including high cost of the implants, the lead time in manufacturing, and lack of intraoperative flexibility need to be addressed. New biomimetic materials have been investigated for use in 3D printing. To increase utilization of 3D printing technology in orthopedics, an all-in-one computer platform should be developed for easy planning and seamless communications among different care providers. Further studies are needed to investigate the real clinical efficacy of 3D printings in orthopedic applications., Competing Interests: Disclosure The Materialise, Mobelife company did not fund or sponsor this research in any way. The author reports no conflicts of interest in this work.

Although the use of patient-specific surgical guides has gained popularity over the past decade, little research has been done to examine in an objective and qualitative way the fit of such instruments. In this study, we have developed a model to predict the stability of a guide designed to fit on a supporting bone surface, thereby providing feedback on the translational and rotational stability of the device. The method was validated by comparing different guide designs with respect to their stability on the contact surface and comparing these results to those measured with a set of experiments. This validation experiment indicates that our stability model can be used to predict the stability of the fit of a surgical guide during the preoperative design process.

Introduction: Congenital tarsal coalition resection in adolescents may be hindered by the complex three-dimensional anatomy of the talocalcaneal joint. Peroperative fluoroscopy is not greatly contributive, especially for talocalcaneal coalition., Hypothesis: 3D planning and patient-specific instruments facilitate the procedure., Materials and Methods: A made-to-measure surgical guide (patient-specific instrument) was used in 9 consecutive patients for tarsal coalition resection (7 talocalcaneal and 2 calcaneonavicular coalitions). The guide was created by 3D modeling from the CT scan of the foot. Placed on the bone surface, it oriented the saw blade to resect the bone bridge at the appropriate depth. A fascia lata allograft was interposed. Complete resection and absence of recurrence were checked on postoperative CT in talocalcaneal and on radiography in calcaneonavicular coalitions., Results: Resection was complete in all cases, with no recurrence at last follow-up., Discussion: This technique makes tarsal coalition resection easier and more reliable and may be recommended to improve precision., Level of Evidence: Level IV, prospective study of a new surgical technique., (Copyright © 2014. Published by Elsevier Masson SAS.)