Search

The present study details the development of a solar dryer with double pass flat plate solar collector having carbon nanodots (CNDs) coated absorber surface. Among the various concentrations of CNDs (0.1, 0.2, 0.5, 1, and 2%), the 0.5% CNDs coated absorber surface recorded the highest absorptance and lowest reflectance with higher spectral selectivity of 0.933. Hence, the 0.5% coating was selected as the optimum concentration and coated over the absorber surface of flat plate solar air collector. SEM image of black painted surface is clear and smooth and CNDs coated absorber surface is having dispersed particle with rough surface. FTIR absorption peak values revealed that the presence of black paint and CNDs in the 0.5% CNDs coated aluminium sheet. The efficiency of collector coated with 0.5% CNDs was calculated at various air flow rate of 0.008, 0.016, 0.018, and 0.021 kg/s and results revealed that the rise in air flow rate from 0.008 to 0.021 kg/s increased the efficiency from 39.22 to 82.99%. The solar dryer connected with the developed collector was tested for the performance and the drying studies revealed that shrimp and false white sardine required 10 h and 11 h drying time during the experimental studies., Competing Interests: Declarations Ethics approval Not applicable. Consent to participate Not applicable. Consent for publication Not applicable. Competing interests The authors have no relevant financial or non-financial interests to disclose., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this study, we present a novel approach for synthesising a merocyanine (MC) compound that integrates gallol and a near‑infrared (NIR) fluorophore using a straightforward method. We conduct a comprehensive structural analysis to elucidate the specific roles of each functional group during monomer synthesis and their effects on the properties of both the spiropyran (SP) and MC forms, particularly their fluorescence. As a proof of concept, we explore the use of these compounds in formulating innovative fluorescent polymeric coatings by melanising catechol and gallol moieties on various substrates, including glass, a cupronickel coin, and an organic polymer. To our knowledge, this is the first report of a bioinspired approach utilizing the melanisation of a catechol and gallol moiety containing merocyanine., (© 2024 Wiley‐VCH GmbH.)

Disperse systems, and emulsions in particular, are currently massively used in fields as varied as food industry, cosmetics, health care and environmentally-friendly materials. To meet increasingly precise needs or targeted applications, these systems need to be endowed with new functionalities at their interfaces, in addition to their composition and structural properties. However, due to the fragility of drops and the low reactivity of their surface, conventional solid surface chemistry cannot be used for such a purpose. Several specific emulsion interface functionalization techniques have thus been developed for targeted systems and applications, but a general framework has yet to be drawn. In this review, we attempt to present these methods in a unified way through the prism of what we may call "liquid surface chemistry". We propose to categorize existing methods into drop-coating strategies, including layer-by-layer techniques and polymer coating, and emulsifier-carrier approaches involving particles and/or amphiphilic molecules. They are discussed in a transversal way, highlighting the underlying physico-chemical principles and providing a comparative analysis of their advantages, current limitations and potential for improvement. We also propose future directions and opportunities, involving for instance DNA-based programmability or artificial intelligence, which could make liquid surface chemistry more versatile and controlled., (© 2024 Wiley‐VCH GmbH.)

Waste LiFePO 4 (LFP) batteries can be harmful to the environment and lead to waste of resources if not properly disposed of. In this study, an efficient and environmentally friendly method for solid-phase recycling waste LFP cathode material (W-LFP) is proposed. Most of the impurities in the W-LFP are removed by air firing. The regenerated LFP is then obtained by adding lithium carbonate and triethanolamine for repair during heat treatment. The addition of triethanolamine converts Fe 3+ to Fe 2+ and also allows the formation of an N-doped modified carbon layer on the surface of the LFP particles, which improves the electrochemical properties of the regenerated material. Physical characterization and electrochemical tests are used to investigate the attenuation and regeneration mechanism of LFP. The regenerated LFP possesses a high specific discharge capacity (152.87 mAh g -1 at 0.2 C), which is about 95.32% of the commercial LFP, and the capacity retention rate is 88.52% after 600 cycles at 1 C. It is worth noting that we do not use solvents such as acids and alkalis in the regeneration process, thus avoiding the generation of large quantities of acid and alkaline waste liquids, which is friendly to the environment. This solid-phase regeneration process offers a promising method for the future recycling of used LFP batteries because of its simplicity, environmental friendliness, and high efficiency.

Marine fouling poses significant challenges to the efficiency and longevity of marine engineering equipment. To address this issue, developing effective marine antifouling coatings is critical to ensure the economic viability, environmental sustainability, and safety of offshore operations. In this study, we developed an innovative green antifouling and wear-resistant coating based on lignin, a renewable and sustainable resource. Lignin is considered environmentally friendly because it is abundant, biodegradable, and reduces reliance on petroleum-based materials. The coating was formulated with a controlled hydrophilic-to-hydrophobic ratio of 2:8, leveraging lignin's unique properties. Applying lignin increased the water contact angle by 14.5 %, improving surface hydrophobicity and contributing to the coating's antifouling efficacy. Moreover, the mechanical strength of the coating was enhanced by approximately 200 %, significantly boosting its durability in harsh marine environments. Additionally, the friction coefficient was reduced by about 85 %, further preventing organism adhesion. These results demonstrate that lignin-based coatings offer a greener alternative to traditional antifouling solutions. The results of this study not only help advance antifouling coating technology but are also consistent with the broader goal of promoting environmental responsibility in marine engineering practice., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Expanded polystyrene (EPS) geofoam blocks are gaining acceptance across industries due to their low density, insulation properties, strength, compressibility, and shock absorption under dynamic loads. The effective application of EPS is impeded by restrictions imposed by using conventional polymer-based synthetic geomembrane insulation ought for protection. Meanwhile, the production process of the geomembrane has detrimental environmental impacts, incurs high costs, and limits the utilization of EPS blocks in various applications. This research aims to create an innovative nanocoating substance using nanocellulose derived from agricultural residues to provide an eco-friendly alternative to geomembranes. The nanocellulose was extracted from four agricultural waste materials; sugarcane bagasse, banana fibers, rice straw, and spent-ground coffee; where each had a local percentage yield of 35 %, 25 %, 19 %, and 10 %, respectively. Based upon a technical criterion provided by the transmission electron microscopy (TEM) micrographs, the TOPSIS multi-criteria decision-making method was used to rank the sustainability of waste materials. It was found that sugarcane bagasse (SCB) is the most sustainable type with the smallest nano particle size. Nanocellulose extracted from SCB was characterized using X-ray diffraction (XRD), energy dispersive X-ray (EDX), nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FTIR). The innovative nanocellulose coating primarily consisted of a nanocellulose mixture (SCB + water), polyvinyl acetate (PVA), and zinc oxide. Fourteen distinct formulas were obtained to identify the optimal proportions suitable for application on EPS surface with respect to the nano particle size, purity, and binding energy between the elements. It was found that the optimum formula consists of 42 % SCB, 50 % PVA, and 8 % zinc oxide., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Dr Irene Samy reports financial support was provided by STDF. Irene reports a relationship with Nile University that includes: employment. Irene declares that there’s no patent information. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Electrospray deposition (ESD) uses strong electric fields applied to solutions and dispersions exiting a capillary to produce charged monodisperse droplets driven toward grounded targets. Self-limiting electrospray deposition (SLED) is a phenomenon in which highly directed, uniform, and even 3D coatings can be achieved by trapping charge in the deposited film, redirecting the field lines to uncoated regions of the target. However, when inorganic particles are added to SLED sprays, the buildup of charge required to repel incoming material is disrupted as particle loading increases. Due to its fibril gelling behavior, methylcellulose (MC) SLED can form nanowire morphologies. These wires, when used as a binder, can separate particles and prevent percolation. In this work, a variety of conductive and insulating particles are explored using patterned and un-patterned substrates. This exploration allows us to maximally load particles for high-concentration and highly controlled self-limiting functional sprays. This is demonstrated using Ti 3 C 2 T x MXene to functionalize an interdigitated electrode for use as a supercapacitor., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

High-safety aqueous zinc (Zn) ion batteries are troubled by dendrite growth and hydrogen evolution reaction on Zn anode, which can be well solved via the construction of surface protective layer. The recent researches mainly focus on the bulk property of the protective layer, but its separation from Zn anode is ignored. In this work, high-viscoelasticity alginate-based (HVAA) layer was in-situ constructed on Zn anodes by the cross-linking of sodium alginate with formaldehyde and the plastifying of glycerin. HVAA layer can combine with H 2 O and coordinate with Zn 2+ ions in aqueous electrolyte to achieve viscoelasticity on Zn anode, which can accommodate volume change of Zn anode during plating/stripping processes to continuously protect Zn anodes under the real battery system. Physical block effect of HVAA layer impedes hydrogen evolution corrosion reaction by avoiding the immediate contact of Zn anodes with aqueous electrolyte. Ionic conductive ability of HVAA layer by coordinating oxygen-containing groups with Zn 2+ can uniform ion flux to induce the homogeneous deposition of Zn 2+ on Zn anode. Zn anode with HVAA endows ZnZn symmetric battery with stably cycle of 4000 h and Zn-iodide full batteries with better electrochemical performance of 8000 cycles comparing with bare Zn anode. This work opens a novel route to continuously protect Zn anode through the high-viscoelasticity films to closely fit with Zn surface and implement the high-value application of renewable sources., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Premature implant failure, a critical concern in biomedical applications, is often attributed to poor biocompatibility and vulnerability to bacterial colonization. These issues are addressed by creating an endoprosthetic material with natural biocompatibility and antibacterial properties. In this in vitro study, the relaxed and unrelaxed tetrahedral amorphous carbon (ta-C) coatings were examined, both fabricated by the improved patented Pulsed Laser Deposition (PLD) technology. The chemical composition, surface roughness, hardness, topography, and wettability were analyzed. The ta-C surfaces were incubated by MM6 cells, E. coli and S. capitis bacteria for 24 h. PCR assessed the inflammatory response in MM6 cells, while fluorescence microscopy quantified adhering bacteria, and scanning electron microscopy examined local adhesion behavior. The results demonstrate comparable carbon phase composition, wettability properties, and hardness for both relaxed and unrelaxed ta-C. However, relaxed ta-C coating exhibited significantly fewer defects in terms of both quantity and quality, along with an antibacterial effect against E. coli. This suggests that the relaxed ta-C coating could contribute to the development of an endoprosthesis, preventing adverse biological reactions and implant-related infections, thus improving the longevity of the prosthesis., (© 2024 The Author(s). Journal of Biomedical Materials Research Part A published by Wiley Periodicals LLC.)

Introduction: To bring cultivated beef to the market, a scalable system that can support growth of bovine satellite cells (bSCs) in a serum-free and preferably also animal-free medium is of utmost importance. The use of microcarriers (MCs) is, at the moment, one of the most promising technologies for scaling up. MCs offer a large surface to volume ratio, they can be used in scalable stirred tank bioreactors, where the culture conditions can be tightly controlled to meet the cells' requirements (temperature, pH, dissolved oxygen). The inherent capacity of the cells to migrate from one MC to another, also known as bead-to-bead transfer, facilitates a scale-up strategy involving MCs. Previous studies have shown growth of bSCs on three commercially available MCs in serum containing media. Unfortunately there is currently no information available regarding their growth on MCs in serum-free conditions., Methods: In this study, we aimed to find suitable serum-free media, MCs and attachment promoting compounds (APCs) supporting the growth of bSCs. Initially, six commercial MCs and three serum-free media were evaluated. The effects of three APCs were compared (vitronectin, laminin and fibronectin). Subsequently, the effects of different concentrations and modes of addition of the best performing APC were investigated., Results and Discussion: Our results showed that Cytodex 1, Synthemax II and CellBIND supported bSCs' growth in all serum-free media. Overall, better growth was observed with Cytodex 1 in serum-free proliferation media. We showed that the use of laminin or vitronectin with Cytodex 1 can significantly improve cell growth and purity. Laminin also allowed attachment and growth of bSCs on Plastic MCs which had been previously unsuccessful without APCs. Finally, we optimized the use of vitronectin from a sustainability and process perspective, and showed that it can be used solely as a coating for Cytodex 1 (16-100 ng/cm 2 ) MCs, instead of as a medium supplement, enhancing cell attachment and proliferation., Competing Interests: VB, AK, EM, TV, and MP are employed by Mosa Meat B.V., a company that aims to commercialize cultured meat. MP is co-founder and shareholder of Mosa Meat B.V. Mosa Meat B.V. has patents on serum-free growth medium (WO2021158103), and serum-free differentiation medium (WO2022114955). The remaining author declares that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Bodiou, Kumar, Massarelli, van Haaften, Post and Moutsatsou.)

Northern corn leaf blight is a devastating disease caused by Setosphaeria turcica (S. turcica), leading to significant yield losses in maize. S. turcica initiates infection through a specialized structure known as the appressorium, which only forms on conducive substrates. In this study, we introduce a semi‑silicone water polyurethane resin (Si-PUD) that induces only germ tube formation from S. turcica conidia. A mixed coating of Si-PUD and polytetrafluoroethylene successfully triggers appressorium formation. Both coatings maintain optical transparency, chemical resistance, and thermal stability, which facilitate microscopic observations and the development of high-throughput systems. These coatings also demonstrate similar effects on Bipolaris maydis (B. maydis), suggesting their potential universal applicability. Utilizing coating-induced synchronous appressorium formation and proteomic analyses, we identified five genes essential for S. turcica appressorium development. Functional analyses of two zinc binuclear cluster domain-containing transcription factors, StTF1 and StTF2, revealed their critical roles in appressorium development and pathogenicity. This study not only develops a novel method for inducing appressorium formation but also lays the groundwork for rapid screening of environmentally-friendly fungicides that inhibit appressorium development., Competing Interests: Declaration of competing interest The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as potential conflicts of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Packaging aims first to protect the quality and safety of food. Although synthetic packaging is easy and practical to use, it significantly poses many health and environmental hazards. In this context, the need for environmentally and food-friendly packaging is increasing. Edible coatings with many barrier properties cover the food surface like a blanket. This study evaluated content analyses and research trends on the edible coating of foods. For this goal, a bibliometric network analysis of the studies that included the concepts of "edible packaging", "coating", and "food" together in the abstracts, keywords, and titles of the articles was carried out. Today, with this network analysis method, it is easier to summarize innovations in edible coating technology and their applicability to foods in a detailed and understandable way. Between 2016 and 2023, bibliometric data consisting of 2131 studies were processed VOSviewer program using the network analysis method. Results revealed that China is the leading country in coatings studies, followed by India. The study shows which foods and methods the coatings are applied., Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-024-06052-7., Competing Interests: Conflict of interestAuthors state that there is no confict of interest., (© Association of Food Scientists & Technologists (India) 2024. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

The intrinsic hydrophilicity of sustainable and environmentally friendly biobased materials like starch and its derivatives limits their potential as hydrophobic functional materials. This study presents an eco-friendly and non-toxic method to create coatings with exceptionally high hydrophobicity. Octadecyltrimethoxysilane (ODS) reacts with nano silica (SiO 2 ) through a silane coupling reaction to form superhydrophobic SiO 2 . The Si-OH groups generated from ODS hydrolysis can undergo a condensation reaction with tannic acid (TA), which is rich in phenolic hydroxyl groups. This enables the hydrophobic silane to bind indirectly with cationic starch (CS), resulting in a stable superhydrophobic CS-based coating. The coating demonstrates significant hydrophobicity (contact angle >170°), excellent UV light transmittance (<4.05 %), self-cleaning properties, prolonged shelf life (over eight months), antibacterial activity, and encapsulation capability. It also shows a separation efficiency exceeding 99 % after 25 oil-water separation cycles and is easily recoverable. The study elucidates the mechanism behind the preparation process and the factors enhancing hydrophobic properties. The research findings suggest that the novel, cost-effective CS/TA/ODS/SiO 2 coating offers a scalable solution for superhydrophobic applications and broadens the horizon for green starch use in hydrophobic materials., Competing Interests: Declaration of competing interest There are no conflicts to declare., (Copyright © 2024 Elsevier B.V. All rights reserved.)

It is hypothesized that layer-by-layer acetate-coated Paclitaxel-loaded PLGA nanoparticles (F2) can be engineered to potentiate the effectiveness of Paclitaxel (PTX) on LNCaP, a human prostate cancer cell line. The core of the layer-by-layer NPs is formed by nanoprecipitation, and the shell of the NPs is engineered using the sodium acetate's unique coating mechanism and surface-active properties. The resulting nanoformulation physicochemical properties are characterized by Fourier Transform Infra-Red (FTIR), Differential Scanning Calorimetry (DSC) Transmission Electron Microscopy (TEM), NanoSight NS300, spectrophotometry, Korsmeyer-Peppas model, respectively. The NP's cytotoxicity on LNCaP is assessed by MTS assay. The DSC and the FTIR confirm SA's coating of the NPs. The particle's mean diameters (PMD) are 89.4±2.3- to 114.4±7.6 nm. The TEM shows a unique multilayer and spherical nanoparticle. The encapsulation efficiency of commonly PTX-loaded PLGA NPs (F1) and F2 are 84.37±2.71% and 86.74±2.22, respectively. The drug transport mechanism of F1 and F2 is anomalous transport and case II, respectively. F2 follows a zero-order release mechanism. The cell viability is 45.08±2.18% and 60.17±4.72% when LNCaP is treated with 10 µg/mL of F2 and F1, respectively, after 48 hours of exposure. F2 and F1 cell growth inhibition are dose-dependent. This unique process of engineering the layer-by-layer NPs will provide new horizons for developing future innovative nanoparticles for targeted prostate cancer therapy., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Novel pharmaceuticals and drug delivery devices may require better performance from the packaging material e.g., in terms of extractables and leachables, and unwanted interactions. To address this, we applied atomic layer deposition (ALD) to build nanometer-range SiO 2 , ZrO 2 and Al 2 O 3 -TiO 2 films on primary packaging glass. Controlled modification of the surface also enabled creation of functionality without affecting visual appearance of the material. ALD-coated Type I borosilicate vials were compared to uncoated ones, and tailored functionality was presented by appropriate measurements. The tested ALD coatings formed a barrier on glass against extractables and leachables, from the vial and the coating alike. A good ALD coating prevents any leakage into the stored drug product. Hydrolytic resistance results improved by 85-92 %, and these results correlated well with straightforward water conductivity measurements. Opposite to uncoated borosilicate glass vials, no extracted elements could be detected from the extracts of the coated vials with stable ALD films. Improved surface integrity was observed with electron microscopy as well. ALD films increased hydrophilicity of the surface and tuning the ALD film thickness and composition allowed precise blocking of UV light wavelengths, without affecting transparency. As a conclusion, ALD is a versatile method to create barrier and functional films on primary packaging materials., Competing Interests: Declaration of competing interest Following financial interests/personal relationships may be considered as potential competing interests: all authors are employees of Picosun Oy, an Applied Materials company, (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Blueberries are highly susceptible to fungal pathogens and oxidative deterioration due to their thin epidermal layer, which can be mitigated by applying a natural polymer-based antimicrobial coating to their surface. This study aimed to develop a chitosan/gelatin-based antimicrobial coating utilizing ginger essential oil (GEO) to extend the postharvest quality of blueberries. To ensure GEO's stability within the coating, it was initially encapsulated with β-cyclodextrin (β-CD) using the inclusion complexation technique. The GEO/β-CD inclusion complex (IC) formed rhomboidal shapes with high encapsulation efficiency and small particle sizes. When the optimized GEO/β-CD IC was incorporated into the chitosan/gelatin polymer solution, it significantly increased surface hydrophobicity and free radical scavenging activity, and suppressed the growth of three selected fungi, namely Botrytis cinerea, Penicillium italicum and Alternaria alternaria. The results of postharvest storage quality revealed that blueberry samples coated with CH/Gel-GEO/β-CD IC-5 effectively maintained the quality of blueberries by decreasing weight loss and decay incidence, and regulating anthocyanin and other oxidation-related enzyme activities compared to the control group during 16 days at 25 °C and 40 days at 4 °C storages. In conclusion, it can be stated that CH/Gel-GEO/β-CD composite coating can be a promising technology to address the drawbacks of blueberry preservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

It has recently been found that magnesium potassium phosphate cement (MKPC) paste coating applied on the surface of steel reinforcement can effectively retard the onset of corrosion and suppress corrosion reactions. However, the fast-setting nature of MKPC-which is a merit in repair-can be problematic in a practical engineering process of coating the steel reinforcement with MKPC paste. To address this problem, boric acid (H 3 BO 3 ) was added as a retarder in an MKPC formulation to prolong the setting time. This work investigated the impact of boric acid (at 5% by weight of MgO) on the anti-corrosion performance of MKPC paste coating through a series of electrochemical (EC) tests. The results showed that the anti-corrosion performance of MKPC paste coating for a mild steel bar could be interfered with by the presence of boric acid. In the same testing situation (immersed in 3.5 wt.% NaCl corrosion solution), the polarization resistance and corrosion current density of the group including boric acid were inferior and exceeded the corrosion thresholds prior to the control group without boric acid. Meanwhile, the time constant phase in the frequency range from 1 Hz to 10 kHz was rarely observed, implying that the presence of boric acid probably impaired the formation of the passivation layer. This decrease in anti-corrosion performance of MKPC paste coating could be related to the larger volume fraction of pores in the range from 0.1 to 10 µm that are formed during the initial stage of coating formation.

The escalating environmental concerns associated with conventional plastic packaging have accelerated the development of sustainable alternatives, making food packaging a focus area for innovation. Bioplastics, particularly polyhydroxyalkanoates (PHAs), have emerged as potential candidates due to their biobased origin, biodegradability, and biocompatibility. PHAs stand out for their good mechanical and medium gas permeability properties, making them promising materials for food packaging applications. In parallel, zinc oxide (ZnO) nanoparticles (NPs) have gained attention for their antimicrobial properties and ability to enhance the mechanical and barrier properties of (bio)polymers. This review aims to provide a comprehensive introduction to the research on PHA/ZnO nanocomposites. It starts with the importance and current challenges of food packaging, followed by a discussion on the opportunities of bioplastics and PHAs. Next, the synthesis, properties, and application areas of ZnO NPs are discussed to introduce their potential use in (bio)plastic food packaging. Early research on PHA/ZnO nanocomposites has focused on solvent-assisted production methods, whereas novel technologies can offer additional possibilities with regard to industrial upscaling, safer or cheaper processing, or more specific incorporation of ZnO NPs in the matrix or on the surface of PHA films or fibers. Here, the use of solvent casting, melt processing, electrospinning, centrifugal fiber spinning, miniemulsion encapsulation, and ultrasonic spray coating to produce PHA/ZnO nanocomposites is explained. Finally, an overview is given of the reported effects of ZnO NP incorporation on thermal, mechanical, gas barrier, UV barrier, and antimicrobial properties in ZnO nanocomposites based on poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate). We conclude that the functionality of PHA materials can be improved by optimizing the ZnO incorporation process and the complex interplay between intrinsic ZnO NP properties, dispersion quality, matrix-filler interactions, and crystallinity. Further research regarding the antimicrobial efficiency and potential migration of ZnO NPs in food (simulants) and the End-of-Life will determine the market potential of PHA/ZnO nanocomposites as active packaging material., Competing Interests: The authors declare no conflicts of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

Solid lipid nanoparticles (SLNs) are becoming increasingly favored for their robust biocompatibility and their capacity to enhance drug solubility, particularly for drugs with limited water solubility. This study delves into the effectiveness of the hot melt sonication technique in fabricating SLNs with high drug loading capabilities and sustained release characteristics. Griseofulvin (GF), chosen as a representative drug due to its poor water solubility, was encapsulated into SLNs composed of stearic acid. Optimization of chitosan-coated GF-loaded SLNs (CS-GF-SLN) was conducted using a Box-Behnken design. Utilizing the desirability approach, optimal parameters were determined, including a lipid quantity of 450.593 mg, chitosan content of 268.67 mg, and sonication duration of 2.14 h. These parameters resulted in a zeta potential of -34.8 mV and a particle size (PS) of 56.87 nm. Following optimization, the refined formulation underwent comprehensive assessment across various parameters. Notably, the drug encapsulated within SLNs exhibited sustained release over three days, as illustrated by the in-vitro drug release profile. The optimized formulation demonstrated a bioavailability enhancement by approximately 1.7 to 2.0 times compared to the conventional formulation. Furthermore, administration of drug-loaded SLNs to a macrophage cell line demonstrated no cytotoxicity, affirming their suitability as conventional drug delivery platforms for GF., (Copyright © 2024. Published by Elsevier B.V.)

As the effects of climate change become more severe and widespread, maintaining personal thermal homeostasis becomes necessary for survival. In principle, advanced textiles and garments have the ability to leverage light absorption, transmission and/or reflection, in addition to straightforward convection, to heat or cool bodies in extreme temperature conditions. For cooling, in particular, surfaces adept at selectively reflecting or refracting high-energy incident light (200 nm-2.5 mm) from the sun while transmitting or emitting infrared light (8-13 mm) from radiant body heat boast the ability to maintain cooler body temperatures, even when exposed to direct sunlight and the open sky. Here, we present a strategy to transform common clothing into implements for passive personal cooling. As confirmed by Mie scattering calculations, cheap and biocompatible calcium carbonate and barium sulfate micro/nanoparticles are found to serve as suitable reflectors for radiative cooling. Finite-difference time domain simulations reveal, surprisingly, that higher reflectance is achieved with surface coatings containing these materials, as compared to extruded metamaterial fibers containing CaCO 3 and BaSO 4 particles embedded within a polymer matrix. A stepwise process involving photoinitiated chemical vapor deposition and ion-exchange driven crystal growth is used to create a lamellar composite coating comprised of alternating CaCO 3 and BaSO 4 nano/microparticle layers directly on the surface of common fabrics. A polyester poplin fabric coated in this manner shows a cooling ability of up to 8 °C compared to an uncoated sample, achieving a maximum cooling of 6 °C below ambient temperature. Wash and durability testing of the lamellar coating reveal no mechanical degradation and no evident attenuation in the material's performance, affirming its resilience and long-term effectiveness as a functional textile coating for personal cooling. We also assess the performance of our coated fabrics in multiple outdoor environments to conclude that we can achieve up to 3.4 °C of sub-ambient cooling in optically complex built environments.

Chitosan is an ideal coating film for food preservation, but the performance of a single chitosan coating film is not good. Herein, the liposome was prepared by embedding copper nanoparticles (CuNPs) and thyme essential oil (TEO) in the hydrophilic and hydrophobic double-domain structure formed by phospholipids, and combining with chitosan to obtain a chitosan-based coating film for litchi preservation. The liposome was well-dispersed and stable with an average particle size of about 190 nm. The liposome showed excellent controllable release properties, and the cumulative release rate of TEO was 65.17 % and that of CuNPs was 15.17 % after 7 days. Furthermore, the oxygen and water vapor barrier properties of the coating film were greatly improved. Importantly, the film possessed effective antioxidant, antibacterial activity and excellent safety, which presents a better fresh-keeping effect on litchi. This study provides insights into the design and manufacture of food packaging for controllable and long-lasting preservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

In the realm of arterial disease interventions, drug-eluting stents (DES) have become a vital therapeutic choice in preventing atherosclerotic plaque formation and restenosis and facilitating vessel healing. Sirolimus-encapsulated poly Lactic-co-Glycolic acid (PLGA) Microparticles (MPs) were developed using solvent evaporation. MPs were freeze-dried with a cryoprotectant and coated on the stent surface using an efficient and reproducible nitrogen-assisted spray coating technique. The MPs displayed a uniform distribution particle size of 4.38 ± 1.1 μm, span value of 0.88 ± 0.02, coating mass transfer efficiency of 13.45 ± 1.1 % on the stent, and a coating time of ≤ 2 min per stent. Post sterilization, the particle size and morphology of the coated stents remained unchanged. Accelerated in vitro drug release profiles were evaluated under different conditions, indicating significant influences based on dissolution methods ranging from 28.2 %±4.3 %, 42.5 %±5.3 %, 76.6 %±4.7 %, and 84.25 %±3.1 % for dialysis bag (DB), vessel simulating flow-through cell (vFTC), flow-through cell (FTC), and sample and separate (SS) technique respectively for 48 h. The drug release mechanism from the coated stents is governed by the combination of the Korsmeyer Peppas and Higuchi models. The developed dissolution method exhibited discriminative effectiveness when evaluated with critical formulation attributes and process parameter variations. The 48 h accelerated drug release studies correlated well with the 6-month real-time release rate with an R 2 value of 0.9142 and Pearson's R2 of 0.9561. Ex-vivo studies demonstrated the permeation of MPs into artery tissues. Stability studies confirmed that MPs coated stents maintained desired properties at 4 °C and 30 °C/65 % RH for 6 months. Overall, these findings contribute to advancing stent technology, suggesting the potential for improvement of arterial interventions and enhanced patient outcomes., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Sarika Jadhav reports financial support was provided by Sahajanand Medical Technologies Pvt Ltd. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper]., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This research highlights the efficacy of NaNbO 3 as a coating for P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 cathodes in sodium-ion batteries. The coating enhances the kinetic behavior and cyclability of the electrochemical cells, as shown by electrochemical measurements. XRD analysis indicates that Nb does not incorporate into the cathode structure, implying a physical interaction between the coating and the cathode material. XRF analysis and EDX mapping confirm the actual composition and uniform dispersion of elements throughout the sample, while the electron micrographs evidence the occurrence of NaNbO 3 particles modifying the surface of the layered oxide. The Ni 4+ /Ni 3+ and Ni 3+ /Ni 2+ redox pairs, along with the partially reversible oxidation of oxide to peroxide anions, contribute significantly to cell capacity, as revealed by XPS spectra. This last effect and the appearance of a co-intercalated phase at high voltage are positive factors to provide fast kinetics. Cyclic voltammograms show that samples coated with 2-3% NaNbO 3 have superior rate capability, with high capacitive response and apparent diffusion coefficients. These samples also have low impedance at the electrode-electrolyte interface, which helps deliver a high capacity at 5C. Further cycling at 1C shows improved cyclability in the bare and 3% coated samples, due to their higher diffusion coefficients on charging. Notably, the 3% NaNbO 3 -coated sample exhibits excellent cyclability below 0 °C, making it a promising cathode material for sodium-ion batteries.

Purpose: Nanoparticles (NPs) as radiosensitizers present a promising strategy for enhancing radiotherapy effectiveness, but their potential is significantly influenced by the properties of their surface coating, which can impact treatment outcomes. Most Monte Carlo studies have focused on metallic NPs without considering the impact of coating layers on radiosensitization. In this study, we aim to assess both the physical and radiobiological effects of nanoparticle coatings in nanoparticle-based radiation therapy., Materials and Methods: In this simulation study, we used Geant4 Monte Carlo (MC) toolkit (v10.07.p02) and simulated the bismuth, gold, iridium and gadolinium NPs coated with polyethylene glycol (PEG-400: Density: 1.13 g/cm³, Molar mass: 380-420 g/mol) as radiosensitizer for photon beams of 30, 60 and 100 keV. Secondary electron number and reactive oxygen species enhancement factor were estimated. Also, dose enhancement factor (DEF) was determined in spherical shells with logarithmic scale thickness from the nanoparticle surface to 4 mm., Results: Secondary electron emission was highest at 30 keV for gold, bismuth, and iridium NPs, while gadolinium NPs peaked at 60 keV. Coating reduced electron emissions across all energies, with thicker coatings leading to a more significant decrease. DEF values declined with increasing radial distance from the NP surface and were lower with thicker coatings. For gadolinium NPs, DEF behavior differed due to K-edge energy effects. Reactive species generation varied, showing maximum production at 30 keV for gold, bismuth, and iridium NPs, while gadolinium NPs showed peak activity at 60 keV. PEG coatings enhanced reactive species formation at 100 keV., Conclusion: The findings indicate that the coating layer thickness and material not only influence the emission of secondary particles and DEF but also affect the generation of reactive species from water radiolysis. Specifically, thicker coatings reduce secondary particle emission and DEF, while PEG coatings demonstrate a dual behavior, offering both protective and enhancing effects depending on photon energy. These insights underscore the importance of optimizing NP design and coating in future studies to maximize therapeutic efficacy in nanoparticle-based radiation therapy., (© 2024. The Author(s).)

Lipase is one of the most widely studied and applied biocatalysts. Due to the high enzyme leakage rate of the immobilization method of physical adsorption, we propose a new lipase immobilization method, based on the combination of macroporous resin adsorption and organic polymer coating. The immobilized Candida antarctica lipase B (CALB@resin-CAB) was prepared by combining the macroporous resin adsorption with cellulose acetate butyrate coating, and its structure was characterized by various analytic methods. Immobilized lipase was applied for biodiesel production using acidified palm oil as the starting material, the conversion rate achieved as high as 98.5% in two steps. Furthermore, the immobilized lipase displayed satisfactory stability and reusability in biodiesel production. When the aforementioned reaction was carried out in a continuous flow packed bed system, the yield of biodiesel was 94.8% and space-time yield was 2.88 g/(mL∙h). The immobilized lipase CALB@resin-CAB showed high catalytic activity and stability, which has good potential for industrial application in the field of oil processing., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

A novel approach, i.e., Continuous Material Deposition on Filaments (CMDF), for the incorporation of active materials within 3D-printed structures is presented. It is based on passing a filament through a solution in which the active material is dissolved together with the polymer from which the filament is made. This enables the fabrication of a variety of functional 3D-printed objects by fused deposition modeling (FDM) using commercial filaments without post-treatment processes. This generic approach has been demonstrated in objects using three different types of materials, Rhodamine B, ZnO nanoparticles (NPs), and Ciprofloxacin (Cip). The functionality of these objects is demonstrated through strong antibacterial activity in ZnO NPs and the controlled release of the antibiotic Cip. CMDF does not alter the mechanical properties of FDM-printed structures, can be applied with any type of FDM printer, and is, therefore, expected to have applications in a wide variety of fields.

Hydrophilic coating can prevent surface from fogging but its application is limited by low mechanical performance. In this study, a hydrophilic coating was prepared by crosslinking the Si-doped carbonized polymer dot (Si-CPD) with 3-glycidyloxypropyltrimethoxysilane (GPTMS) and ethylene oxide (EO). The hydrophilic coating can be used as robust hydrophilic anti-fogging coating. The Si-CPD derived from ethylene diamine tetraacetic acid (EDTA) and aminopropyl oligosiloxanes (APOS) was successfully prepared via one-step hydrothermal method. Then, a resin solution was prepared by mixing Si-CPD, GPTMS and EO. Epoxy group of GPTMS and EO can react with amino group of Si-CPD. Finally, a composite coating with antifogging function can be obtained by simple heating curing. Due to the introduction of hydroxyl which derived from EO, the coating shows excellent antifogging performance. Meanwhile, the presence of inorganic component endows the coating with outstanding mechanical performance. The coating has great potential in related applications, such as optical lenses, mirrors and other transparency substrates., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

Waterborne polyurethane (WPU) often suffers from poor water resistance and mechanical properties due to hydrophilic emulsifiers. To address these issues, this study introduces glycidyl carbamate (GC) as a crosslinker to improve WPU performance. Three types of GC were synthesized using aliphatic, cycloaliphatic, and aromatic isocyanates, respectively. The crosslinked network was established through a reaction between the epoxide group of GC and the carboxylic acid and amine groups of WPU. Among these, the WPU film utilizing aromatic isocyanate-based GC exhibited the highest crosslink density, modulus, hardness, and water resistance, due to the rigidity of the aromatic molecular structure. However, the film displayed excessive brittleness, resulting in reduced tensile strength, along with yellowing typically associated with aromatic compounds. The WPU crosslinked with cycloaliphatic GC demonstrated the next best mechanical properties and water resistance, with a 2.7-fold increase in tensile strength, a 1.5-fold increase in hardness, and a 66% reduction in the water swelling ratio compared to neat WPU. This study presents a novel and effective strategy to enhance the water resistance and mechanical properties of WPU films, making them suitable for advanced coating applications.

Water-repellent coatings are essential for enhancing the durability and sustainability of textiles, paper, and bioplastic polymers. Despite the growing use of sustainable materials, their inherent hydrophilicity presents significant challenges. This review explores advanced coating technologies to address these issues, focusing on their mechanisms, properties, and applications. By imparting water resistance and repellency, these coatings improve material performance and longevity. The environmental impact and limitations of current coatings are critically assessed, highlighting the need for sustainable solutions. This review identifies key trends and challenges, offering insights into developing water-resistant materials that align with environmental goals while meeting industry demands. Key focus areas include coating mechanisms, techniques, performance evaluation, applications, environmental impact assessment, and the development of sustainable coating solutions. This research contributes to the development of water-resistant materials that meet the demands of modern industries while minimizing environmental impact.

The effort to replace toxic compounds with natural alternatives led to intensive investigations on the use of polysaccharides as coatings for corrosion protection. Biological macromolecules, such as chitosan, demonstrate great potential for the development of sustainable anticorrosion coatings. However, the role played by important properties, such as molecular weight, on the performance of the coatings, remains unclear. In this paper, the influence of molecular weight on the anticorrosion properties of chitosan coatings is investigated using AA2024-T3 aluminum alloy as substrate. Chitosan of three different molecular weights were used for the preparation of coatings and free-standing films, and their properties (morphology, swelling degree, and water contact angle) were evaluated. The corrosion performance of the coated samples was investigated by an atmospheric corrosion essay and by electrochemical impedance spectroscopy, in NaCl 3.5 % solution. The results show that the low-molecular-weight chitosan coatings present the lowest swelling degree (603 %), highest water contact angle (86.4°), lowest porosity, and superior performance in both corrosion tests, reaching impedances close to 10 5 Ωcm 2 even after seven days of exposure to corrosive solution., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Aluminum alloys, characterized by their low density and high mechanical strength, are widely applied in the manufacturing sector. However, the application of aluminum alloys in extreme environments presents severe corrosion challenges. Sol-gel organic coating techniques have garnered significant attention due to their excellent stability, barrier properties, and cost-effectiveness, as well as their simpler processing. Nevertheless, conventional sol-gel coatings are unable to withstand the corrosive effects of high-chloride and high-halide ion environments such as marine conditions, owing to their inherent structural defects. Therefore, this study proposes the utilization of a simple method to synthesize catechol (CA) and meta-phenylenediamine (MPD)-derived catecholamine compounds to modify sol-gel coatings. Surface characteristics of the modified coatings were analyzed using Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The thickness of the modified coating was approximately 6.8 μm. The CA/MPD-modified substance effectively densifies the sol-gel coating, enhancing its corrosion protection performance. A 3.5 wt% NaCl solution was used to simulate a marine environment, and electrochemical impedance spectroscopy (EIS) was conducted using an electrochemical workstation to evaluate the coating's protective properties over a long-term period. The results indicate that the modified coating provides protection for 3003 aluminum alloy for a minimum of 30 days under corrosive conditions, outperforming unmodified sol-gel coatings in terms of corrosion resistance.

Background: The Mexican lime (Citrus aurantifolia cv.), widely consumed in Iran and globally, is known for its high perishability. Edible coatings have emerged as a popular method to extend the shelf life of fruits, with xanthan gum-based coatings being particularly favored for their environmental benefits. This study aims to evaluate the effectiveness of an edible coating formulated from xanthan gum, enriched with Spirulina platensis (Sp) and pomegranate seed oil (PSO), in improving the quality and reducing the weight loss of Mexican lime fruit under conditions of 20 ± 2 °C and 50-60% relative humidity., Results: Based on the results, the application of coatings was generally effective in reducing fruit weight loss, with the least weight loss observed in the xanthan gum 0.2%+ Spirulina platensis extract (1%) treatment. Additionally, the levels of total phenols and flavonoids in the treated fruits exceeded those in the control group, with xanthan gum 0.2%+ Spirulina platensis extract (1%) and xanthan gum 0.2% exhibiting the highest concentrations of these compounds. The antioxidant capacity of the fruits was also enhanced by the coatings, surpassing that of the control group, with xanthan gum 0.2%+ Spirulina platensis extract (1%) achieving the highest levels. The treatments significantly suppressed the activity of the polyphenol oxidase (PPO) enzyme, with xanthan gum 0.2% demonstrating the most potent inhibitory effect. Furthermore, the treatments resulted in increased activities of catalase (CAT) and peroxidase (POD) enzymes compared to the control. Except for xanthan gum 0.2%+ pomegranate seed oil (0.05%), all treatments maintained the fruit's greenness (a*) more effectively than the control., Conclusions: Peel browning is a major factor contributing to the decline in quality and shelf life of lime fruit. The application of 0.1% and 0.2% xanthan gum coatings, as well as a combination of 0.2% xanthan gum and Spirulina platensis extract, significantly inhibited PPO activity and enhanced the activity of CAT and POD and phenolic compound in Mexican lime fruits stored at of 20 ± 2 °C for 24 days. Consequently, these treatments comprehensively preserved lime fruit quality by significantly reducing browning, maintaining green color, and preserving internal quality parameters such as TA, thereby enhancing both visual appeal and overall fruit quality., (© 2024. The Author(s).)

Catheter-associated urinary tract infection (CAUTI) remains an unsolved challenge to date, particularly with the emergence and rapid spread of antimicrobial-resistant bacterial pathogens. Despite extensive research, a catheter coating that can offer intrinsic resistance to host protein deposition, bacterial biofilm formation, and swarming is still urgently required. Zwitterionic hydrogel coatings due to their superior lubricity and antifouling properties represent a promising candidate, but their weak mechanical stability in water and poor resistance to bacterial swarming migration limit their application in urinary catheters for infection control. In this research, we describe the fabrication of a multifunctional catheter coating by copolymerizing zwitterionic sulfobetaine methacrylate (SBMA) polymers and a swarming inhibitor material, 2-hydroxy-3-phenoxypropyl acrylate (HPA). The introduction of polyHPA (PHPA) effectively impeded the uncontrolled swelling behavior of the zwitterionic PSBMA hydrogel, resulting in enhanced mechanical stability. Moreover, the copolymer coating retains the antifouling and anti-swarming properties of the homopolymers when challenged with fibrinogen, Escherichia coli, and Proteus mirabilis. The HPA content significantly correlated with its anti-adhesion activity against fibrinogen and biofilm, and the coating with an SBMA: HPA monomer feed molar ratio of 4:1 showed the best antifouling activity, reducing fibrinogen deposition by about 40 % and biofilm coverage by around fourfold compared to the uncoated polydimethylsiloxane (PDMS) surface. Furthermore, the copolymer coating also exhibited no cytotoxicity, suggesting it as a promising catheter coating for preventing CAUTI., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Prosthesis loosening due to lack of osteointegration between an implant and surrounding bone tissue is one of the most common causes of implant failure. Further, bacterial contamination and biofilm formation onto implants represent a serious complication after surgery. The enhancement of osteointegration can be achieved by using bioconductive materials that promote biological responses in the body, stimulating bone growth and thus bonding to tissue. Through the incorporation of antibacterial substances in bioconductive, biodegradable calcium phosphate (CaP) coatings, faster osteointegration and bactericidal properties can be achieved. In this study, Cu-doped CaP supraparticles are spray-dried and suspension-sprayed CaP ceramic coatings with antibacterial properties are prepared using high-velocity suspension flame spraying (HVSFS). The objective was to increase the coatings' porosity and investigate which Cu-doped supraparticles have the strongest antibacterial properties when introduced into the coating layers. Biocompatibility was tested on human Osteosarcoma cells MG63. A porosity of at least 13% was achieved and the supraparticles could be implemented, enhancing it up to 16%. The results showed that the addition of Cu-doped supraparticles did not significantly reduce the number of viable cells compared to the Cu-free sample, demonstrating good biocompatibility. The antimicrobial activity was assessed against the bacterial strains Escherichia coli and Staphylococcus aureus , with Safe Airborne Antibacterial testing showing a significant reduction in both Gram-positive and Gram-negative strains on the Cu-doped coatings.

Rising climate change and extreme weather conditions underpin thermoregulation limitations of conventional textiles. This study investigates enhancing the thermal properties of cotton fabric by incorporating synthesized 1-tetradecanol (TD) phase change material (PCM) microcapsules. Characterization of the TD microcapsules was performed using dynamic light scattering (DLS), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The microcapsules (average size of 0.49 μm) displayed a melting enthalpy (∆Hm) of 105 J·g -1 and a crystallization enthalpy (∆Hc) of 51 J·g -1 . The microcapsules were mixed with the acrylic binder in three different ratios (75:25, 50:50, and 25:75). Hydrothermal, knife-over-roll, and pad-dry-cure methods were employed for coating microcapsules to cotton fabric. Microcapsule coating on cotton fabric using hydrothermal coating with a 75:25 microcapsule binder ratio achieved the highest add-on (55 %) and good durability after 25 home washes. The thermal insulation R-value of the coated fabric was enhanced (0.0029 m 2  K·W -1 ) at 40 °C. The real-time test showed a temperature difference of 2.8 °C and thermal imaging displayed lower emissivity for TD-coated fabric. The TD microcapsule coating offers a promising method for developing climate-responsive textiles, enhancing thermal comfort, and reducing energy consumption in heating and cooling systems., Competing Interests: Declaration of competing interest The authors have declared that no conflict of interest exists., (Copyright © 2024. Published by Elsevier B.V.)

The erosion phenomena of the natural stone in cultural heritage are induced by various sources. Consequently, the development of multifunctional protective materials that combine two or more useful properties is an effective strategy in addressing the synergistic effects of various erosion mechanisms. A multifunctional coating, consisting of a silane-based precursor and zinc oxide (ZnO) nanoparticles (NPs), is produced and tested for the protection of limestone. The hybrid coating combines the following three properties: superhydrophobicity, including water-repellency, photocatalytic self-cleaning and biocidal activity. The relative concentration of the NPs (0.8% w/w), used for the suggested composite coating, is carefully selected according to wetting studies, colourimetric measurements and durability (tape peeling) tests. The non-wetting state is evidenced on the surface of the composite coating by the large contact angle of water drops (≈153°) and the small contact angle hysteresis (≈5°), which gives rise to a physical self-cleaning scenario (lotus effect). The photocatalytic chemical self-cleaning is shown with the removal of methylene blue, induced by UV-A radiation. Moreover, it is shown that the suggested coating hinders the incubation of E. coli and S. aureus, as the inhibitions are 94.8 and 99.9%, respectively. Finally, preliminary studies reveal the chemical stability of the suggested coating.

The curcumin was encapsulated within a double-layered complex shell of nano-sized cellulose as the primary layer and the native starch (MDC) or the nano-sized starch (NDC) as the secondary layer to improve its stability, decreasing its release rate, while masking bitterness. The double-walled curcumin capsules were studied for encapsulation efficiency, colour behaviour at different pH and characterization using FTIR, DSC & FESEM. The encapsulation efficiency for NDC and MDC was 97.11 % & 90.46 %. The FTIR showed a shift of peaks to higher wavelength particularly at 1043 cm -1 and most of the curcumin peaks disappeared or had low intensity as enclosed within the layers of the capsules. Further, fish fillets were coated in starch paste containing 20 % double-walled curcumin capsules and the visible colour change was observed during a 7-day storage period at refrigerated conditions that could confirm the spoilage of fish to consumers without opening the package., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Palliative therapy utilizing interventional stents, such as vascular stents, biliary stents, esophageal stents, and other stents, has been a prevalent clinical strategy for treating duct narrowing and partial blockage. However, stent restenosis after implantation usually significantly compromises therapeutic efficacy and patient safety. Clinically, vascular stent restenosis is primarily attributed to endothelial hyperplasia and coagulation, while the risk of biliary stent occlusion is heightened by bacterial adhesion and bile sludge accumulation. Similarly, granulation tissue hyperplasia leads to tracheal stent restenosis. To address these issues, surface modifications of stents are extensively adopted as effective strategies to reduce the probability of restenosis and extend their functional lifespan. Applying coatings is one of the technical routes involving a complex selection of materials, drug loading capacities, release rates, and other factors. This paper provides an extensive overview of state of the art drug-coated stents, addressing both challenges and future prospects in this domain. We aim to contribute positively to the ongoing development and potential clinical applications of drug-coated stents in interventional therapy., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Background: Since its development in the 1980 s, chemical vapor deposition (CVD) diamond has found wide application in addressing various engineering challenges, owing to its outstanding characteristics, including exceptionally high hardness, excellent thermal conductivity, and remarkable stability. Notably, processing tools utilizing CVD diamond as the working material exhibit substantial potential for application in the field of mechanical manufacturing. Serving as a viable substitute for natural diamond, CVD diamond processing tools not only offer advantages in production costs but also ensure processing performance on par with natural diamonds. This presents a valuable and effective approach for achieving advanced manufacturing with high precision and low production costs., Aim of Review: The research progress of CVD diamond processing tools is comprehensively reviewed from four perspectives, encompassing the CVD process of diamonds, preparation methods, processing applications, and future development directions of CVD diamond processing tools., Key Scientific Concepts of Review: The classification and exposition of CVD diamond deposition processes were presented. The fabrication of CVD diamond processing tools was elaborated. The machining applications of CVD diamond processing tools were then reviewed, mainly focusing on cutting and grinding processes, along with the tool wear characteristics. Finally, research challenges pertaining to CVD diamond processing tools were summarized, with insights proposed for future development opportunities and the anticipation of enhanced performance for prospective engineering applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Production and hosting by Elsevier B.V.)

Objective: Flow diverters (FDs) carry the risk of thromboembolic complications associated with the device and bleeding complications associated with dual antiplatelet therapy. We hypothesize that an antithrombotic surface-coated FD (ASCFD) would have less acute thrombus formation and better endothelialization on the device surface compared with uncoated FD., Methods: A ASCFD was developed. Acute clot formation and chronic endothelialization over the device were assessed in 8 rabbit models compared with its prototype FD (PFD) at 2 hours and 1 month by scanning electron microscopy (SEM) and histologic images. Nonparametric score data, including thrombus, injury, endothelialization, adventitial inflammation, intramural bleeding, and intimal hyperplasia were compared between ASCFD and PFD using the Kendall coefficient of rank correlation., Results: Parent artery and branch artery were patent on digital subtraction angiography in 8 ASCFDs and 6 PFDs. There was 1 intrastent thrombosis in PFDs at 2 hours and 1 intrastent stenosis in PFDs at 1 month. SEM at 2 hours showed that a large number of blood cells adhered to the surface of all 4 PFDs, and no blood cells were found on the surface of all 4 ASCFDs. At SEM and histologic analysis of 1 month, there was less inflammation (Kendall τ-B -0.818; P ＝ 0.022), less vessel wall injury (Kendall τ-B = -0.764; P ＝ 0.032), and better endothelialization (Kendall τ-B = 0.818; P ＝ 0.022) in ASCFDs., Conclusions: In the rabbit model, the ASCFD is associated with less thrombus formation at the acute stage, less inflammation, less vessel injury, and better endothelialization on the device surface compared with the PFD., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Nanocelluloses are emerging as natural materials with favourable properties for coating industry and can be applied by state-of-the-art spraying technology. While additional functionalities are commonly introduced through chemical modification, the surface microstructuring of nanocellulose coatings with high throughput methods remains unexplored. Here, a femtosecond laser is used for texturing spray-coated coatings made of cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC). For coating thickness of 1.5 to 8 μm, processing limits were determined with maximum ablation energy linearly increasing with coating thickness and minimum ablation energy decreasing or increasing depending on the apparent coating density. Within applicable processing window of pulse rate and power setting, the operational ranges were determined for creating one-dimensional and two-dimensional surface patterns, requiring a higher laser energy for CNC compared to CNF coatings and yielding thinnest possible resolved patterns of 17 μm as determined by the laser spot diameter. The laser ablation under low energy corresponds to an increase in surface roughness and intensifies surface hydrophilicity, while the line patterns are able to pin water droplets with rising water contact angles up to 90°. Present feasibility study opens future possibilities for managing surface properties of nanocellulose coatings in applications where tuning of surface hydrophilicity is required., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this paper, the PANI/PDA-Ti 4 O 7 composite coating was prepared on 316L by constant current deposition with a current density of 2.8 mA·cm -2 , in which the Ti 4 O 7 powders were modified by PDA (polydopamine). The open-circuit potential of the obtained PANI/PDA-Ti 4 O 7 composite coating is about 365 mV Ag/AgCl , which is more positive than that of the bare 316L. During immersion in 1 M H 2 SO 4 + 2 ppm HF for 200 h, the high stable corrosion potential and the lower R indicate that the composite coating has long-term corrosion resistance.f indicate that the composite coating has long-term corrosion resistance.

A common challenge in hydrogel-based delivery systems is the premature release of low molecular weight encapsulates through diffusion or swelling and reduced cell viability caused by the low pH in gastric conditions. A second biopolymer, such as chitosan, can be incorporated to overcome this. Chitosan is usually associated with colonic drug delivery systems. We intended to formulate chitosan-coated pectin beads for use in delaying premature release of the encapsulate under gastric conditions but allowing release through disintegration under intestinal conditions. The latter is of utmost importance in delivering most functional food ingredients. Therefore, this study investigated the impact of formulation and process conditions on the size, sphericity, and dissolution behavior of chitosan-coated hydrogel beads prepared by interfacial coacervation. The size and sphericity of the beads depend on the formulation and range from approximately 3 to 5 mm and 0.82 to 0.95, respectively. Process conditions during electro-dripping may be modulated to tailor bead size. Depending on the voltage, bead size ranged from 1.5 to 4 mm. Confocal laser scanning microscopy and scanning electron microscopy confirmed chitosan shell formation around the pectin bead. Chitosan-coated beads maintained their size and shape in simulated gastric fluid but experienced structural damage in simulated intestinal fluid. Therefore, they represent a novel delivery system for functional food ingredients.

Chitosan-based biomass packaging materials are a promising material for food preservation, but their limited solubility, antioxidant capacity, UV resistance, and mechanical properties severely restrict their application. In this study, we developed a novel chitosan-based coating/packaging composite (QCTO) using quaternary ammonium salt and tannic acid (TA)-modified chitosan (QCS-TA) and oxidized chitosan (OCS). The introduction of quaternary ammonium salt and TA effectively improves the water solubility and antibacterial, antioxidant, and UV-resistant properties of chitosan. The Schiff-base bond formed between OCS and QCS-TA, along with the TA-mediated multiple interactions, conferred the prepared composite film with good mechanical properties (69.9 MPa tensile strength) and gas barrier performance to water (14.3 g·h -1 ·m -2 ) and oxygen (3.5 g·mm·m -2 ·h -1 ). Meanwhile, the prepared QCTO composites demonstrate excellent biocompatibility and safety and are applied as coatings for strawberries and bananas as well as packaging films for mushrooms. These preservation experiments demonstrated that the prepared composites are able to effectively reduce weight loss, prevent microbial growth, maintain color, and significantly prolong the shelf life of fresh products (bananas, strawberries, and mushrooms extended shelf life by 6, 5, and 6 days, respectively). Therefore, the developed QCTO coating/packaging film shows great potential for applications in the field of food preservation and packaging.

Structural colors particularly of the angle-independent category stemming from wavelength-dependent light scattering have aroused increasing interest due to their considerable applications spanning displays and sensors to detection. Nevertheless, these colors would be heavily altered and even disappear during practical applications, which is related with the variation of refractive index mismatch by liquid wetting/infiltrating. Inspired by bird feathers, we propose a simple deposition toward the coating with angle-independent structural color and superamphiphobicity. The coating is composed of ∼200 nm-sized channel-type structures between hollow silica and air nanostructures, exhibiting a robust sapphire blue color independent of intense liquid intrusion, which duplicates the characteristics of the back feather of Eastern Bluebird. A high color saturation and superamphiphobicity of the biomimetic coating are optimized by manipulating the coating parameters or adding black substances. Excellent durability under harsh conditions endows the coating with long-term service life in various extreme environments.

Organosolv lignin extracted from vine pruning residues was added to hydroxypropyl methylcellulose (HPMC)-based films using three strategies: i) lignin incorporated into the film (lignin-based film), ii) lignin nanoparticles (LNPs) incorporated into the film (LNPs-based film), and iii) lignin coated on HPMC films' surface (lignin-coated film). The films obtained were evaluated in terms of morphology, water barrier and mechanical properties, and antioxidant capacity. Results showed that LNPs incorporation did not affect the films´ water vapour permeability (WVP). Nonetheless, the lignin-based and lignin-coated films improved the water barrier properties of HPMC-based films, achieving a 31.5 and 36 % reduction of WVP, respectively. The morphological evaluation, performed by scanning electron microscopy, revealed films' morphology changes with the lignin incorporation, which was more evident in the lignin-based films. Fourier transform infrared spectroscopy (FTIR) showed minor changes in the film's structure using the different lignin incorporation methods. The mechanical properties were improved, including a significant increase in the tensile strength in the lignin-based and lignin-coated films. All films showed high radical scavenging activity (RSA) after 24 h, with a gradual increase in the lignin-coated films over time. The lignin-coated films showed to be the most promising incorporation strategy to improve the HPMC-based film's properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Natural fiber-reinforced composites are becoming popular day by day because of their low cost and renewable nature. However, a major concern of these composites is water absorption. To minimize the water absorption in natural fiber-reinforced composites, wood varnish coating was used in this paper to investigate the effect of this coating on water absorption and mechanical properties of jute fiber-reinforced composites. Four types of composites were fabricated using the hand lay-up technique, among them on Type 1 no coating was used, Type 2 was surface coated, Type 3 was fiber coated and Type 4 was both fiber and composite surface coated. Water absorption, tensile, bending, short beam shear, and impact tests were performed on the composite specimens according to their respective ASTM standards to see the effect of coating. Both fiber and fracture surface morphology were observed using Scanning Electron Microscope. It was found that the water absorption was significantly reduced for Type 2 (50.31 %) and Type 4 (56.01 %) specimens. However, the tensile strength and bending strength were reduced by 74.17 %, and 72.71 % for Type 3 and 77.07 % and 84.24 % for Type 4 composites while for Type 2, they were slightly increased (7.26 % and 1.13 %). The ILSS of Type 3 and Type 4 were reduced by 69.34 % and 58.07 % respectively while it was reduced by only 4.49 % for Type 2 composite. On the other hand, the impact energy absorption was increased by 85.32 % for Type 4 composite. The findings of this study suggest that Type 2 composite (only composite surface coating) has the overall best performance and wood varnish coating has the potential to reduce the water absorption on natural fiber-reinforced composites., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Widespread adoption for substitutes of artificial bone grafts based on proper bioceramics has been generated in recent years. Among them, calcium-silicate-based bioceramics, which possess osteoconductive properties and can directly attach to biological organs, have attracted substantial attention for broad ranges of applications in bone tissue engineering. Approaches exist for a novel strategy to promote the drawbacks of bioceramics such as the incorporation of Zn 2+ , Mg 2+ , and Zr 4+ ions into calcium-silicate networks, and the improvement of their physical, mechanical, and biological properties. Recently, hardystonite (Ca 2 ZnSi 2 O 7 ) bioceramics, as one of the most proper calcium-silicate-based bioceramics, has presented excellent biocompatibility, bioactivity, and interaction. Due to its physical, mechanical, and biological behaviors and ability to be shaped utilizing a variety of fabrication techniques, hardystonite possesses the potential to be applied in biomedical and tissue engineering, mainly bone tissue engineering. A notable potential exists for the newly developed bioceramics to help therapies supply clinical outputs. The promising review paper has been presented by considering major aims to summarize and discuss the most applicable studies carried out for its physical, mechanical, and biological behaviors., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study explores the potential of graphene oxide (GO) as an additive in waterborne polyurethane (WPU) resins to create eco-friendly coatings with enhanced anticorrosive properties. Traditionally, WPU's hydrophilic nature has limited its use in corrosion-resistant coatings. We investigate the impact of incorporating various GO concentrations (0.01, 0.1, and 1.3 wt%) and functionalizing GO with ethylenediamine (EDA) on the development of anticorrosive coatings for carbon steel. It was observed, by potentiodynamic polarization analysis in a 3.5% NaCl solution, that the low GO content in the WPU matrix significantly improved anticorrosion properties, with the 0.01 wt% GO-EDA formulation showing exceptional performance, high E corr (-117.82 mV), low i corr (3.70 × 10 -9 A cm -2 ), and an inhibition corrosion efficiency (η) of 99.60%. Raman imaging mappings revealed that excessive GO content led to agglomeration, creating pathways for corrosive species. In UV/condensation tests, the 0.01 wt% GO-EDA coating exhibited the most promising results, with minimal corrosion products compared to pristine WPU. The large lateral dimensions of GO sheets and the cross-linking facilitated by EDA enhanced the interfacial properties and dispersion within the WPU matrix, resulting in superior barrier properties and anticorrosion performance. This advancement underscores the potential of GO-based coatings for environmentally friendly corrosion protection.

Background: The first generation of titanium nitride (TiN) coatings for orthopaedic implants was clinically introduced in the 1990s because of their promising biocompatibility, wear resistance, and corrosion resistance. This study evaluated the in vivo performance of early TiN-coated knee and hip implants, focusing on the bearing surfaces and mechanisms of in vivo damage., Methods: There were 13 TiN-coated implants (5 knee and 8 hip) retrieved from 8 patients as part of a multi-institutional implant retrieval program. The average implantation time was 4.25 years for knees and 17.5 years for hips. Implant revisions occurred for various reasons, including polyethylene wear, loosening, pain, infection, and instability. Components were examined using a semiquantitative scoring method, and surface roughness measurements were performed using white-light interferometry. Surface morphology, chemistry, and particle characterization were also assessed by scanning electron microscopy., Results: For hips, mild corrosion was found on femoral head tapers, along with severe scratching on certain femoral heads. Knee implants exhibited low burnishing and scratching for both mechanisms. Roughness measurements (S a ) were 37.3 nm (interquartile range = 22.0 to 62.4) for hips and 85.3 nm (interquartile range = 66.3 to 110) for knees. The observed scratch depth in both hip and knee implants due to third-body particles ranged from 0.3 to 1.3 μm. The coating coverage remained intact in the majority of the implants, with 2 cases of small, localized cohesive chipping and substrate exposure., Conclusions: The results of this study confirm the potential in vivo durability of early TiN coatings and will be useful in benchmarking wear tests for modern TiN-coated orthopaedic implants., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)