Search

The combination of crystallization, transparency, and strength is still a challenge for broadening the application of polylactic acid (PLA) films, while it is also difficult to balance. In this work, the long aliphatic chains of octadecylamine (ODA) were grafted onto the surface of cellulose nanocrystal (CNC) by tannic acid oxidation self-polymerization and Michael addition/Schiff base reaction between polytannic acid and ODA. Furthermore, the ODA grafted CNC (g-CNC) was used as green reinforcement for the PLA matrix and a series of PLA/g-CNC nanocomposite films were prepared by the casting method. The DSC, WAXD, POM, UV-vis and stretching test were employed to examine the effect of g-CNC on the properties of the as-prepared PLA/g-CNC nanocomposite films. It shows that the g-CNC is effective to improve the melt crystallization rate of PLA from 11 min to 7.3 min. Most importantly, the crystal size of the PLA spherulites was significantly reduced due to the well dispersion in the amorphous PLA matrix, which would effectively improve the transmittance of the PLA films and synchronously realize the combination of crystallization (62 %) and transparency (80.6 %). Moreover, the improved crystallization could also enhance the heat deformation performance of the PLA films since the heat resistance is closely associated with the crystallinity. Besides, the grafted ODA long chains improve the compatibility between CNC and PLA, leading to the reinforcement of PLA matrix, where the tensile strength reaches 65.05 MPa from 44.31 MPa. Compared with the pristine CNC, the addition of g-CNC makes more comprehensive improvement in the properties of the PLA films., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A traditional injectable photocrosslinked hydrogel had disadvantages of the residual photoinitiator and toxic crosslinker, slow in situ curing, and a complex preparation process. At the same time, hydrogels cannot act as artificial skin to restore skin sensory function during the wound healing cycle. In this work, an injectable photocrosslinked hydrogel was prepared which can be quickly in situ cured without photoinitiator. Oxidized sodium alginate was used as a natural macromolecular crosslinking agent to form an injectable hydrogel framework with the photosensitive polymer polyvinyl alcohol bearing styrylpyridinium group (PVA-SBQ). In addition, the hydrogel was endowed with photothermal therapy property after the introduction of biomass-like polydopamine particles. When used as a wound dressing, the hydrogel exhibited an excellent antibacterial property, with an antibacterial rate of 99.56% Escherichia coli and 97.96% Staphylococcus aureus . As a result, the hydrogel could significantly accelerate the repair of infected wounds, with a wound healing rate of 96.45% after 14 days. Moreover, the hydrogel exhibited a sensitive and stable sensing property, making it promising to reconstitute the sensory function of damaged skin during treatment. This work provides an idea for the development of injectable photocrosslinked hydrogel dressing.

The raw material of polylactide (PLA) is lactic acid obtained by biological fermentation. PLA is the most promising degradable polymer to replace traditional plastics to address the pollution problems caused by their non-degradability. However, the application of PLA is hindered by its low softening temperature, easy hydrolysis, and poor toughness. Herein, the ternary composites with PLLA, PDLA and Poly (butylene adipate-co-terephthalate) (PBAT) were prepared by melt blending to balance its thermal stability, hydrolysis, and toughness. The effects of PBAT content (3 %, 6 %, 9 % and 12 %) and isothermal crystallization temperature on composite properties were fully investigated. The results show that the composite of stereo-complexed PLA (sc-PLA) with 6 % PBAT crystallized at 110 °C exhibits good comprehensive properties. Its vicat softening temperature (VST), mass loss rate under alkaline (pH = 12) and breaking elongation are 166 °C, 21.6 % and 4.40 %, respectively. Compared with the pure PLLA sample crystallized at same condition, the VST, mass loss rate and breaking elongation are 159 °C, 24.7 % and 3.76 % respectively, which increased by nearly 5 %, 13 % and 20 %. This indicates that this strategy is feasible to balance the heat resistance, hydrolysis resistance and toughness of PLA, while it sacrifices the tensile strength a little. This work provides a new way to modify and improve the PLA properties. Nonetheless, it is also necessary to coordinate the compatibility of PLA and PBAT., Competing Interests: Declaration of competing interest The authors declare that they have no competing financial interests in connection with the submitted works., (Copyright © 2022 Elsevier B.V. All rights reserved.)

In recent years, natural polymer-based electrospun fibers (EFs) with huge specific surface area, good biocompatibility, and biological activity obtained from electrospinning process exhibit tremendous vitality in the field of biomedical areas. Herein, the parameters of electrospinning from two perspectives, polymer solution such as solvent, polymeric relative molecular mass, concentration, viscosity, and conductivity of the solution, and electrospinning process such as spinning voltage, spinning flow rate, needle tip to collector distance, temperature, and humidity are first detailed. Next, the raw materials consisting of polysaccharides such as cellulose, hyaluronic acid, alginate, and chitosan as well as proteins such as collagen, gelatin, silk fibroin, and keratin are summarized. The preparation method and related characteristics of EFs with multistage structures such as porous, core-shell, Janus, bamboo-like and other structures are introduced. The biomedical applications of these natural polymer-based EFs mainly including tissue engineering, drug sustained release, wound dressings, and biomedical sensors are systematically recapitulated. Finally, the outlook on natural EFs is further proposed., (© 2022 Wiley-VCH GmbH.)

Strippable film is effective for removing radioactive contamination. However, it still has some limitations, such as the long curing time (about 30 min~24 h) and the requirement of organic solvents. To address these issues, we report a simple protocol to prepare strippable decontamination films using liquid polybutadiene (LPB) and tert-butyl acrylate (TBA) as the raw materials without solvent and using camphorquinone/ethyl 4-dimethylaminobenzoate (CQ/EDB) as a photoinitiator, where the film was formed under household LED panel light or daylight irradiation for about 540 s. After a thorough study of viscosity, real-time Fourier transform infrared (RT-FTIR spectra), gel and volatile organic compound (VOC) contents, mechanical properties and decontamination efficiency, the optimum composition and curing conditions were determined for the decontamination strippable film. VOC content is as low as 12.7 ± 0.7% and the resultant strippable film exhibits good mechanical performances with a tensile strength of up to 5.4 ± 0.4 MPa and elongation of up to 66.6 ± 13%. Most important, the decontamination efficiencies of this strippable film for 133 CsCl on glass, ceramic and metal surfaces reach up to 98.1%, 94.3% and 97.6%, respectively.

This paper investigated the feasibility of enhancing the interface between lignocellulosic fibers and a polypropylene matrix via structure alteration of lignin at elevated temperatures. Alkali treatment can remove gum substances from lignocellulose fibers effectively at elevated temperatures but easily causes damages to fiber strength. In previous studies on directional delignification of lignocellulosic fibers, loss of fiber strength is avoided but condensation and degradation of lignin are accelerated. So far, few reports have been available on the effect of lignin structures on the interface between fibers and a matrix. In this study, jute fibers with different lignin structures are produced at 100 and 130 °C for reinforcing a polypropylene matrix. The interface between the fibers and matrix is analyzed. The result shows that decrease in aliphatic hydroxyl concentration by 9.5% at 130 °C from 3 to 5 h contributes to a 14.2% decrease in the surface energy of jute fibers. Meanwhile, the polydispersity index of lignin decreases from 1.21 to 1.15. Centralized distribution of lignin molecule-weight and reduction in fiber surface energy improves the interface between the fibers and matrix, which manifests as a 30.8% increase in the impact strength of the composites. Similar improvement is not observed in the composites reinforced with jute fibers at 100 °C, due to the absence of lignin-structure changes. This paper provides a new strategy to improve the interface between lignocellulose fibers and a hydrophobic matrix.

In this research, nanocellulose crystal (NCC) grafted with lactic acid (LA) oligomer was synthesized by one-pot method and used to reinforce the poly(l-lactic acid) (PLLA) matrix. FT-IR, XRD, and 13 C NMR were used to analyze the structure of modified nanocellulose crystal (g-NCC). The results of GPC suggested that the degree of polymerization of the grafted segments was 23, and the degree of hydroxyl substitution of g-NCC was 2.4%. For the g-NCC/PLLA composite, its crystallization rate increases significantly compared with pure PLLA, indicating that g-NCC acted as a nucleating agent to promote the crystallization. Moreover, tensile strength of the composite materials was significantly improved from 41.9 MPa to 53.9 MPa due to the enhanced compatibility. This study provides a fast and effective modification method for g-NCC/PLLA biodegradable composites. According to the above-mentioned experimental results, the g-NCC/PLLA composites can be considered as a potential material in the packaging field, mainly due to its proper biological and physicochemical properties., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Natural extracts gallnut tannins (GTs) were used as functional components to prepare chitosan/gallnut tannins (CS/GTs) composite fiber by blended solution spinning. Chitosan fiber has great potential to be used as absorbent suture and dressing due to its good biocompatibility. However, the weak mechanical properties limited its application. Chitosan and GTs were blended in aqueous solution of acetic acid to spin the composite fiber. The results indicated that CS/GTs fiber can be easily prepared due to the appropriate rheology characteristics for blended solution. Compared with pure chitosan fiber, CS/GTs fiber with 10% GTs showed lower hydrophilicity and higher dry, wet breaking strength by more than 40% due to ionic cross-linking between chitosan and GTs. The bacterial reduction to Staphylococcus aureus increased from 49.0 to 99.7% and about double green and red fluorescent intensity were observed for CS/GTs fiber. GTs have great potentiality in improving the properties of chitosan fiber., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

In this study, polyacrylic acid modified filter paper (FP/PAA) was synthesized by in-situ polymerization of acrylic acid, which was used as a matrix to chelate nano-scale zero valent iron (nZVI). The loading content of nZVI in the filter paper reached 24.8%. The fabricated composite FP/PAA/nZVI was characterized by SEM, FT-IR and TGA respectively. Moreover, it was used for the removal of methyl blue and methylene blue as model anionic and cationic dyes. The effect of initial dye concentration on decolorization efficiency was investigated. The results showed that FP/PAA/nZVI enhanced the removal of dye from the simulated dye wastewater and the decolorization efficiency exceeded 95% for the dye solutions lower than 20 mg/L. More importantly, the filter paper supported nZVI realized the continuous treatment of simulated dye wastewater by a simple filtration process. This study hopes to serve as a basis for the application of nZVI in textile wastewater treatment.

Chicken feather, a potential source of keratin, is often disposed as waste material. Although some methods, i.e., hydrolysis, reduction, and oxidation, have been developed to isolate keratin for composites, it has been limited due to the rising environmental concerns. In this work, a green solvent N-methylmorpholine N-oxide (NMMO) was used to extract keratin from chicken feather waste. Eighty-nine percent of keratin was extracted using 75% NMMO solution. However, the result from size exclusion HPLC showed that most of the keratin degraded into polypeptide with molecular weight of 2189 and only 25.3% regenerated keratin was obtained with molecular weight of 14,485. Analysis of amino acid composition showed a severe damage to the disulfide bonds in keratin during the extraction procedure. Oxidization had an important effect on the reconstitution of the disulfide bonds, which formed a stable three-dimensional net structure in the regenerated keratins. Besides, Raman spectra, NMR, FT-IR, XRD, and TGA were used to characterize the properties of regenerated keratin and raw chicken feather. In the end, a possible mechanism was proposed based on the results.

In this research, keratin was extracted from the disposable chicken feather using l-cysteine as reducing agent. Then, it was re-dissolved in the sodium carbonate-sodium bicarbonate buffer, and the pure keratin membrane and fiber were fabricated by doctor-blade casting process and wet spinning method, respectively. Scanning electron microscopy (SEM), fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were used to characterize the chemical and physical properties of resulting powder, membrane and fiber. Compared with the raw chicken feather, the regenerated keratin materials retain its chemical structure and thermal stability, their relative crystallinity is a little different depend on the shaping method, which leads to the difference in moisture regain. The mechanical results show that tensile strength of the keratin membrane researches 3.5MPa, have potential application in biomedical fields. However, the keratin fiber presents low tenacity, i.e. 0.5cN/dtex, this problem should be solved in order to apply the new fiber in textile and material science., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Novel amphiphilic conetworks (APCNs) with uniform channel size were synthesized through end-cross-linking of well-defined amphiphilic triblock copolymers via atom transfer radical polymerization (ATRP). A new ditelechelic polydimethylsiloxane macroinitiator was synthesized to initiate the polymerization of N,N-dimethylacrylamide. The resulting triblock copolymers show well-defined molecular weight with narrow polydisperisty, which are telechelic modified by allylamine and fully cross-linked with polyhydrosiloxanes through hydrosilylation. Transmission electron microscopy shows that the APCN has the behavior of microphase separation with small channel size and uniform phase domain. The resulting APCNs with idealized microstructure exhibit a combination of excellent properties, i.e., superhigh mechanical strength (4 ± 1 MPa) and elongation ratio (175 ± 25%), outstanding oxygen permeability (350 ± 150 barrers), a high water uptake property, and excellent biocompatibility, indicating that in this way, "near perfect" networks are obtained. These results are better than those reported in the literature, suggesting a promising semipermeable barrier for islet encapsulation in relative biomaterial fields.

In this paper, rod-like chitin whisker was used as a filler to reinforce the chitosan membrane, and a series of composite membranes were prepared by casting-evaporation method. Mechanical testing shows that tensile strength of the resulting composite membrane with 3 wt% chitin whisker content reaches up to 110.3 MPa, which is about 2.8 times than that of neat chitosan membrane (38.5 MPa), and moisture regain of all composite membranes presents a decreasing tendency with increasing content of chitin whisker. Furthermore, SEM was used to investigate the morphology difference between neat chitosan membrane and composite membranes, to understand the reinforce mechanism of chitin whisker. Wide angle x-ray diffraction and Fourier transform infrared spectroscopy were used to visualize the structure change before and after the compositing processes. Besides, the bacterostatic test shows that this composite membrane presents effective inhibitory effect on Staphylococcus aureus, Escherchia coli and Corinebaterium michiganence respectively, which indicates it a promising material for packaging and wound dressing., (Copyright © 2013 Elsevier B.V. All rights reserved.)

A binary ionic liquid system was confirmed to be a promising solvent to dissolve chitosan, and the regenerated chitosan fibers were prepared by wet and dry-wet spinning technique respectively. The SEM results show that the chitosan fibers prepared by wet spinning technique present striated surface and round cross section, and the chitosan fibers prepared by dry-wet spinning technique present smooth surface and irregular cross section. The mechanical testing results show that the regenerated chitosan fibers present relatively high tenacity, especially, these prepared by dry-wet spinning process present excellent strength and initial modulus, i.e. 2.1cN/dtex and 83.5cN/dtex, which is stronger than that of most reported chitosan fibers. The FT-IR results show that the dissolution of chitosan in the binary ionic liquid system is due to the protonation of NH₂ groups in the chitosan chains. Furthermore, a possible reaction during the dissolution and regeneration process is proposed., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In this study, glycine hydrochloride (Gly·HCl) is confirmed to be a promising solvent for dissolving native chitosan and preparing regenerated chitosan membrane. As compared with the chitosan membrane prepared from traditional acetic acid, the membrane prepared from Gly·HCl by dry technique shows excellent tensile strength and initial modulus, i.e. 103.8MPa and 3.2GPa, respectively, which is superior to any chitosan membrane and most chitosan blend membranes reported in literatures. Besides, scanning electron microscopy (SEM), wide-angle X-ray diffraction (WAXD) and Fourier transform infrared spectroscopy (FT-IR) were used to visualize the difference between the two kind of regenerated chitosan membranes. The SEM results show that the membrane prepared from Gly·HCl by dry technique presents a novel structure, which ensures its high tenacity. Furthermore, the chitosan microporous membranes were also prepared using PEG as porogen., (Copyright © 2012 Elsevier Ltd. All rights reserved.)