Search

Color centers, arising from zero-dimensional defects, exploit quantum confinement to access internal electron quantum degrees of freedom, holding potential for quantum technologies. Despite intensive research, the structural origin of many color centers remains elusive. In this study, we employ in-situ cathodoluminescence scanning transmission electron microscopy combined with integrated differential phase contrast imaging to examine how defect configuration in tungsten sulfide determines color-center emission. Using an 80-kV accelerated electron beam, defects were deliberately produced, visualized, excited in situ and characterized in real time in monolayer WS 2 within hBN|WS 2  | hBN heterostructures at 100 K. These color centers were simultaneously measured by cathodoluminescence microscopy and differentiated by machine learning. Supported by DFT calculations, our results identified a crucial sulfur vacancy configuration organized into featured vacancy pairs, generating stable and bright luminescence at 660 nm. These findings elucidate the atomic-level structure-exciton relationship of color centers, advancing our understanding and quantum applications of defects in 2D materials., (© 2024. The Author(s).)

Solar-blind ultraviolet (UV) detection plays a critical role in imaging and communication due to its low-noise background, high signal-to-noise ratio, and strong anti-interference capabilities. Detecting the polarization state of UV light can enhance image information and expand the communication dimension. Although polarization detection is explored in visible and infrared light, and applied in fields such as astrophysics and submarine seismic wave detection, solar-blind UV polarization detection remains largely unreported. This is primarily due to the challenge of creating UV polarizers with high transmittance, high extinction ratio, and strong resistance to UV radiation. In this study, it is discovered that the space symmetry breaking of the β-Ga 2 O 3 's b-c plane results in a significant optical absorption dichroic ratio. Leveraging β-Ga 2 O 3 's high solar-blind UV response, a lensless solar-blind UV polarization-sensitive photodetector, circumventing the challenges associated with solar-blind UV polarizers is designed. This photodetector exhibits an exceptionally high intrinsic polarization ratio under 254 nm linearly polarized light, approximately two orders of magnitude higher than other reported nanomaterial-based polarization-sensitive photodetectors. Additionally, it demonstrates significant advantages in solar-blind UV imaging and light communication. This work introduces a novel strategy for solar-blind ultraviolet polarization detection and offers a promising approach for solar-blind light communication., (© 2024 Wiley‐VCH GmbH.)

Objective: To investigate the associations between apparent diffusion coefficient (ADC) values extracted from three different region of interest (ROI) position approaches and programmed cell death ligand-1 (PD-L1) expression, and evaluate the performance of the nomogram established based on ADC values and clinicopathological parameters in predicting PD-L1 expression in cervical cancer (CC) patients., Methods: Through retrospective recruitment, a training cohort of 683 CC patients was created, and a validation cohort of 332 CC patients was prospectively recruited. ROIs were delineated using three different methods to measure the mean ADC (ADC mean ), single-section ADC (ADC ss ), and the minimum ADC of tumors (ADC min ). Logistic regression was employed to identify independent factors related to PD-L1 expression. A nomogram was drawn based on ADC values combined with clinicopathological features, its discrimination and calibration performances were estimated using the area under the curve (AUC) of receiver operating characteristic and calibration curve. The clinical benefits were evaluated by decision curve analysis., Results: The ADC min independently correlated with PD-L1 expression. The nomogram constructed with ADC min and other independent clinicopathological-related factors: FIGO staging, pathological grade, parametrial invasion, and lymph node status demonstrated excellent diagnostic performance (AUC = 0.912 and 0.903, respectively), good calibration capacities, and greater net benefits compared to the clinicopathological model in both the training and validation cohorts., Conclusion: ADC min independently correlated PD-L1 expression, and the nomogram established with ADC min and clinicopathological independent prognostic factors had a strong predictive performance for PD-L1 expression, thereby serving as a promising tool for selecting cases eligible for immunotherapy., Clinical Relevance Statement: The minimum ADC can serve as a reliable imaging biomarker related to PD-L1 expression; the established nomogram combines the minimum ADC and clinicopathological factors that can assist clinical immunotherapy decisions., (© 2024. The Author(s), under exclusive licence to European Society of Radiology.)

Supercontinuum generation (SCG) from silica-based photonic crystal fibers (PCFs) is of highly technological significance from microscopy to metrology, but has been hindered by silica's relatively low intrinsic optical nonlinearity. The prevailing approaches of filling PCF with nonlinear gases or liquids can endow fibre with enhanced optical nonlinearity and boosted SCG efficiency, yet these hybrids are easily plagued by fusion complexity, environmental incompatibility or transmission mode instability. Here this work presents a strategy of embedding solid-state 2D MoS 2 atomic layers into the air-holes of PCF to efficiently enhance SCG. This work demonstrates a 4.8 times enhancement of the nonlinear coefficient and a 70% reduction of the threshold power for SCG with one octave spanning in the MoS 2 -PCF hybrid. Furthermore, this work finds that the SCG enhancement is highly layer-dependent, which only manifests for a real 2D regime within the thickness of five atomic layers. Theoretical calculations reveal that the critical thickness arises from the trade-off among the layer-dependent enhancement of the nonlinear coefficient, leakage of fundamental mode and redshift of zero-dispersion wavelength. This work provides significant advances toward efficient SCG, and highlights the importance of matching an appropriate atomic layer number in the design of functional 2D material optical fibers., (© 2024 Wiley‐VCH GmbH.)

Platinum (Pt) oxides are vital catalysts in numerous reactions, but research indicates that they decompose at high temperatures, limiting their use in high-temperature applications. In this study, we identify a two-dimensional (2D) crystalline Pt oxide with remarkable thermal stability (1,200 K under nitrogen dioxide) using a suite of in situ methods. This 2D Pt oxide, characterized by a honeycomb lattice of Pt atoms encased between dual oxygen layers forming a six-pointed star structure, exhibits minimized in-plane stress and enhanced vertical bonding due to its unique structure, as revealed by theoretical simulations. These features contribute to its high thermal stability. Multiscale in situ observations trace the formation of this 2D Pt oxide from α-PtO 2 , providing insights into its formation mechanism from the atomic to the millimetre scale. This 2D Pt oxide with outstanding thermal stability and distinct surface electronic structure subverts the previously held notion that Pt oxides do not exist at high temperatures and can also present unique catalytic capabilities. This work expands our understanding of Pt oxidation species and sheds light on the oxidative and catalytic behaviours of Pt oxide in high-temperature settings., (© 2024. The Author(s).)

Two-dimensional (2D) semiconductors, owing to their strong excitonic emission, are emerging as efficient gain media for constructing the ultimate nanolaser. The further integration of 2D semiconductors with plasmonic devices holds promise for realizing the thinnest laser. However, the implementation of 2D semiconductor plasmonic lasing is severely hindered by the limited cavity feedback and low gain resulting from insufficient plasmon-exciton interactions. Here, we report the realization of a room-temperature 2D semiconductor plasmonic laser by embedding an InSe nanoflake into a plasmonic Fabry-Perot (F-P) cavity. This plasmonic F-P cavity shows an exceptional ability to recycle the leaked dark surface plasmon, resulting in >2-fold enhancement of feedback compared to that of conventional metal-insulator-semiconductor nanolasers. Moreover, via combination of field enhancement and orientation matching, this cavity facilitates optimized plasmon-exciton coupling to ensure sufficient gain for sustaining room-temperature lasing. Our work may open up the possibilities for multifunctional photonic devices based on 2D materials.

Over the past decade, research on atomically thin two-dimensional (2D) transition metal dichalcogenides (TMDs) has expanded rapidly due to their unique properties such as high carrier mobility, significant excitonic effects, and strong spin-orbit couplings. Considerable attention from both scientific and industrial communities has fully fueled the exploration of TMDs toward practical applications. Proposed scenarios, such as ultrascaled transistors, on-chip photonics, flexible optoelectronics, and efficient electrocatalysis, critically depend on the scalable production of large-area TMD films. Correspondingly, substantial efforts have been devoted to refining the synthesizing methodology of 2D TMDs, which brought the field to a stage that necessitates a comprehensive summary. In this Review, we give a systematic overview of the basic designs and significant advancements in large-area epitaxial growth of TMDs. We first sketch out their fundamental structures and diverse properties. Subsequent discussion encompasses the state-of-the-art wafer-scale production designs, single-crystal epitaxial strategies, and techniques for structure modification and postprocessing. Additionally, we highlight the future directions for application-driven material fabrication and persistent challenges, aiming to inspire ongoing exploration along a revolution in the modern semiconductor industry.

Nanomaterials with a large chiroptical response and high structural stability are desirable for advanced miniaturized optical and optoelectronic applications. One-dimensional (1D) nanotubes are robust crystals with inherent and continuously tunable chiral geometries. However, their chiroptical response is typically weak and hard to control, due to the diverse structures of the coaxial tubes. Here we demonstrate that as-grown multiwalled boron nitride nanotubes (BNNTs), featuring coherent-stacking structures including near monochirality, homo-handedness and unipolarity among the component tubes, exhibit a scalable nonlinear chiroptical response. This intrinsic architecture produces a strong nonlinear optical response in individual multiwalled BNNTs, enabling second-harmonic generation (SHG) with a conversion efficiency up to 0.01% and output power at the microwatt level-both excellent figures of merit in the 1D nanomaterials family. We further show that the rich chirality of the nanotubes introduces a controllable nonlinear geometric phase, producing a chirality-dependent SHG circular dichroism with values of -0.7 to +0.7. We envision that our 1D chiral platform will enable novel functions in compact nonlinear light sources and modulators., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

Interlayer twist evokes revolutionary changes to the optical and electronic properties of twisted bilayer graphene (TBG) for electronics, photonics and optoelectronics. Although the ground state responses in TBG have been vastly and clearly studied, the dynamic process of its photoexcited carrier states mainly remains elusive. Here, we unveil the photoexcited hot carrier dynamics in TBG by time-resolved ultrafast photoluminescence (PL) autocorrelation spectroscopy. We demonstrate the unconventional ultrafast PL emission between the van Hove singularities (VHSs) with a ∼4 times prolonged relaxation lifetime. This intriguing photoexcited carrier behavior is ascribed to the abnormal hot carrier thermalization brought by bottleneck effects at VHSs and interlayer charge distribution process. Our study on hot carrier dynamics in TBG offers new insights into the excited states and correlated physics of graphene twistronics systems., (Copyright © 2024 Science China Press. Published by Elsevier B.V. All rights reserved.)

Excitonic devices operate based on excitons, which can be excited by photons as well as emitting photons and serve as a medium for photon-carrier conversion. Excitonic devices are expected to combine the advantages of both the high response rate of photonic devices and the high integration of electronic devices simultaneously. However, because of the neutral feature, exciton transport is generally achieved via diffusion rather than using electric fields, and the efficient control of exciton flux directionality has always been difficult. In this work, a precisely designed one-dimensional periodic nanostructure (1DPS) is used to introduce periodic strain field along with resonant mode to the WS 2 monolayer, achieving exciton oriented diffusion with a 7.6-fold exciton diffusion coefficient enhancement relative to that of intrinsic, while enhancing the excitonic emission intensity by a factor of 10 and reducing exciton saturation threshold power by 2 orders of magnitude. Based on the analysis of the density functional theory (DFT) and the finite-element method (FEM), we attribute the anisotropy of exciton diffusion to exciton funneling induced by periodic potentials, which do not require excessive potential height difference for an efficient oriented diffusion. As a result of resonant emission, the exciton diffusion is dragged into the nonlinear regime owing to the high exciton density close to saturation, which improves the exciton diffusion coefficient and diffusion anisotropy more appreciably.

Optical nonlinearities are one of the most fascinating properties of two-dimensional (2D) materials. While tremendous efforts have been made to find and optimize the second-order optical nonlinearity in enormous 2D materials, opportunities to explore higher-order ones are elusive because of the much lower efficiency. Here, we report the giant high odd-order optical nonlinearities in centrosymmetric correlated van der Waals insulator manganese phosphorus triselenide. When illuminated by two near-infrared femtosecond lasers, the sample generates a series of profound four- and six-wave mixing outputs. The near-infrared third-order nonlinear susceptibility reaches near the highest record values of 2D materials. Comparative measurements to other prototypical nonlinear optical materials [lithium niobate, gallium(II) selenide, and tungsten disulfide] reveal its extraordinary wave mixing efficiency. The wave mixing processes are further used for nonlinear optical waveguide with multicolor emission. Our work highlights the promising prospect for future research of the nonlinear light-matter interactions in the correlated 2D system and for potential nonlinear photonic applications.

The Boltzmann Tyranny, set by thermionic statistics, dictates the lower limit of switching slope (SS) of a MOSFET to be 60 mV/dec, the fundamental barrier for low-dissipative electronics. The large SS leads to nonscalable voltage, significant leakage, and power consumption, particularly at short channels, making transistor scaling an intimidating challenge. In recent decades, an array of steep-slope transistors has been proposed; none is close to an ideal switch with ultimately abrupt switching (SS ∼ 0 mV/dec) between the binary logic states. We demonstrated an all-2D-materials van-der-Waals-heterostructure (vdW)-based FET that exhibits ultrasteep switching (0.33 mV/dec), a large on/off current ratio (∼10 7 ), and an ultralow off current (∼0.1 pA). The "Subthreshold-Free" operation achieved by the collective behavior of functional materials enables FET switching directly from the OFF-state to the ON-state with entirely eliminated subthreshold region, behaving as the ideal logic switch. Two-inch wafer-scale device fabrication is demonstrated. Boosted by device innovation and emerging materials, the research presents an advancement in achieving the "beyond-Boltzmann" transistors, overcoming one of the CMOS electronics' most infamous technology barriers that have plagued the research community for decades.

Rhombohedral-stacked transition-metal dichalcogenides (3R-TMDs), which are distinct from their hexagonal counterparts, exhibit higher carrier mobility, sliding ferroelectricity, and coherently enhanced nonlinear optical responses. However, surface epitaxial growth of large multilayer 3R-TMD single crystals is difficult. We report an interfacial epitaxy methodology for their growth of several compositions, including molybdenum disulfide (MoS 2 ), molybdenum diselenide, tungsten disulfide, tungsten diselenide, niobium disulfide, niobium diselenide, and molybdenum sulfoselenide. Feeding of metals and chalcogens continuously to the interface between a single-crystal Ni substrate and grown layers ensured consistent 3R stacking sequence and controlled thickness from a few to 15,000 layers. Comprehensive characterizations confirmed the large-scale uniformity, high crystallinity, and phase purity of these films. The as-grown 3R-MoS 2 exhibited room-temperature mobilities up to 155 and 190 square centimeters per volt second for bi- and trilayers, respectively. Optical difference frequency generation with thick 3R-MoS 2 showed markedly enhanced nonlinear response under a quasi-phase matching condition (five orders of magnitude greater than monolayers).

Large-scale, high-quality, and uniform monolayer molybdenum disulfide (MoS 2 ) films are crucial for their applications in next-generation electronics and optoelectronics. Epitaxy is a mainstream technique for achieving high-quality MoS 2 films and is demonstrated at a wafer scale up to 4-in. In this study, the epitaxial growth of 8-in. wafer-scale highly oriented monolayer MoS 2 on sapphire is reported as with excellent spatial homogeneity, using a specially designed vertical chemical vapor deposition (VCVD) system. Field effect transistors (FETs) based on the as-grown 8-in. wafer-scale monolayer MoS 2 film are fabricated and exhibit high performances, with an average mobility and an on/off ratio of 53.5 cm 2 V -1 s -1 and 10 7 , respectively. In addition, batch fabrication of logic devices and 11-stage ring oscillators are also demonstrated, showcasing excellent electrical functions. This work may pave the way of MoS 2 in practical industry-scale applications., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

The exceptional physical properties of two-dimensional (2D) van der Waals (vdW) materials have been extensively researched, driving advances in material synthesis. Epitaxial growth, a prominent synthesis strategy, enables the production of large-area, high-quality 2D films compatible with advanced integrated circuits. Typical 2D single crystals, such as graphene, transition metal dichalcogenides and hexagonal boron nitride, have been epitaxially grown at a wafer scale. A systematic summary is required to offer strategic guidance for the epitaxy of emerging 2D materials. Here we focus on the epitaxy methodologies for 2D vdW materials in two directions: the growth of in-plane single-crystal monolayers and the fabrication of out-of-plane homostructures. We first discuss nucleation control of a single domain and orientation control over multiple domains to achieve large-scale single-crystal monolayers. We analyse the defect levels and measures of crystalline quality of typical 2D vdW materials with various epitaxial growth techniques. We then outline technical routes for the growth of homogeneous multilayers and twisted homostructures. We further summarize the current strategies to guide future efforts in optimizing on-demand fabrication of 2D vdW materials, as well as subsequent device manufacturing for their industrial applications., (© 2024. Springer Nature Limited.)

Electrons residing in a flat-band system can play a vital role in triggering spectacular phenomenology due to relatively large interactions and spontaneous breaking of different degeneracies. In this work, we demonstrate chirally twisted triple bilayer graphene, a new moiré structure formed by three pieces of helically stacked Bernal bilayer graphene, as a highly tunable flat-band system. In addition to the correlated insulators showing at integer moiré fillings, commonly attributed to interaction induced symmetry broken isospin flavors in graphene, we observe abundant insulating states at half-integer moiré fillings, suggesting a longer-range interaction and the formation of charge density wave insulators which spontaneously break the moiré translation symmetry. With weak out-of-plane magnetic field applied, as observed half-integer filling states are enhanced and more quarter-integer filling states appear, pointing toward further quadrupling moiré unit cells. The insulating states at fractional fillings combined with Hartree-Fock calculations demonstrate the observation of a new type of correlated charge density wave insulators in graphene and points to a new accessible twist manner engineering correlated moiré electronics.

One-dimensional transition metal dichalcogenides exhibiting an enhanced bulk photovoltaic effect have the potential to exceed the Shockley-Queisser limit efficiency in solar energy harvest within p - n junction architectures. However, the collective output of these prototype devices remains a challenge. We report on the synthesis of single-crystalline WS 2 ribbon arrays with defined chirality and coherent polarity through an atomic manufacturing strategy. The chirality of WS 2 ribbon was defined by substrate couplings into tunable armchair, zigzag, and chiral species, and the polarity direction was determined by the ribbon-precursor interfacial energy along a coherent direction. A single armchair ribbon showed strong bulk photovoltaic effect and the further integration of ~1000 aligned ribbons with coherent polarity enabled upscaling of the photocurrent.

We demonstrate a compact ultrafast fiber laser system that can deliver 1.87 GHz pulse train at 1550 nm with a pulse energy of 52 pJ and an ultrashort pulse duration of 57 fs. While an acousto-optic mode-locking fiber laser was used as the seed light source at GHz rate, a stage of Er-doped fiber amplifier boosted the laser power to ∼320 mW, giving a pulse energy of ∼170 pJ. Then, a pulse compression setup was constructed, providing a high compression ratio of ∼10 with a total efficiency of ∼32%. In the cascaded compression configuration, multiple fiber samples with alternately normal and anomalous dispersion were fused together, providing efficient nonlinear spectral broadening while suppressing excessive pulse broadening over propagation. This GHz-rate ultrafast fiber laser, with compact configuration, broad optical spectrum, and high time-resolving ability could be used as the seed light source for constructing high-rate, high-power ultrafast laser systems and may find a few applications in optical measurements and microwave photonics.

Compared to transition metal dichalcogenide (TMD) monolayers, rhombohedral-stacked (R-stacked) TMD bilayers exhibit remarkable electrical performance, enhanced nonlinear optical response, giant piezo-photovoltaic effect and intrinsic interfacial ferroelectricity. However, from a thermodynamics perspective, the formation energies of R-stacked and hexagonal-stacked (H-stacked) TMD bilayers are nearly identical, leading to mixed stacking of both H- and R-stacked bilayers in epitaxial films. Here, we report the remote epitaxy of centimetre-scale single-crystal R-stacked WS 2 bilayer films on sapphire substrates. The bilayer growth is realized by a high flux feeding of the tungsten source at high temperature on substrates. The R-stacked configuration is achieved by the symmetry breaking in a-plane sapphire, where the influence of atomic steps passes through the lower TMD layer and controls the R-stacking of the upper layer. The as-grown R-stacked bilayers show up-to-30-fold enhancements in carrier mobility (34 cm 2 V -1 s -1 ), nearly doubled circular helicity (61%) and interfacial ferroelectricity, in contrast to monolayer films. Our work reveals a growth mechanism to obtain stacking-controlled bilayer TMD single crystals, and promotes large-scale applications of R-stacked TMD., (© 2024. The Author(s).)

Monolayer transition metal dichalcogenides (TMDs) are considered promising building blocks for next-generation photonic and optoelectronic devices, owing to their fascinating optical properties. However, their inherent weak light absorption and low quantum yield severely hinder their practical applications. Here, we report up to 18000-fold photoluminescence (PL) enhancement in a monolayer WSe 2 -coupled plasmonic nanocavity. A spectroscopy-assisted nanomanipulation technique enables the assembly of a nanocavity with customizable resonances to simultaneously enhance the excitation and emission processes. In particular, precise control over the magnetic cavity mode facilitates spectral and spatial overlap with the exciton, resulting in plasmon-exciton intermediate coupling that approaches the maximum emission rate in the hybrid system. Meanwhile, the cavity mode exhibits high radiation directivity, which overwhelmingly directs surface-normal PL emission and leads to a 17-fold increase in the collection efficiency. Our approach opens up a new avenue to enhance the PL intensity of monolayer TMDs, facilitating their implementation in highly efficient optoelectronic devices.

Chiral nanographenes (NGs) have garnered significant interest as optoelectronic materials in recent years. While helically chiral NGs have been extensively studied, axially chiral NGs have only witnessed limited examples, with no prior reports of axially chiral nonbenzenoid NGs. Herein we report an axially chiral nonbenzenoid nanographene featuring six pentagons and four heptagons. This compound, denoted as 2 , was efficiently synthesized via an efficient Pd-catalyzed aryl silane homocoupling reaction. The presence of two bulky 3,5-di- tert -butylphenyl groups around the axis connecting the two nonbenzenoid PAH (AHR) segments endows 2 with atropisomeric chirality and high racemization energy barrier, effectively preventing racemization of both R - and S -enantiomers at room temperature. Optically pure R - 2 and S - 2 were obtained by chiral HPLC separation, and they exhibit circular dichroism (CD) activity at wavelengths up to 660 nm, one of the longest wavelengths with CD responses reported for the chiral NGs. Interestingly, racemic 2 forms a homoconfiguration π-dimer in the crystal lattice, belonging to the I222 chiral space group. Consequently, this unique structure renders crystals of 2 with a second harmonic generation (SHG) response, distinguishing it from all the reported axially chiral benzenoid NGs. Moreover, R - 2 and S - 2 also exhibit SHG-CD properties.

Widespread resurgence of dengue outbreaks has seriously threatened the global health. Due to lack of treatments and vaccines, one key strategy in dengue control is to reduce the vector population size. As an environment-friendly mosquito control approach, releasing male mosquitoes transinfected with specific Wolbachia strain into the field to suppress the wild mosquito population size has become wildly accepted. The current study evaluates the effectiveness of this suppression strategy on dengue control under changing temperature and precipitation profiles. We formulate a mathematical model which includes larval intra-specific competition, the maturation period for mosquitoes, the extrinsic incubation period (EIP) and intrinsic incubation period (IIP). The persistence of mosquitoes and disease is discussed in terms of two basic reproduction numbers (R M and R 0 ) and the release ratio p w . Further numerical simulations are carried out to not only validate theoretical results, but also provide interesting quantitative observations. Sensitivity analysis on the reproduction numbers, peak size, peak time and the final epidemic size is performed with respect to model parameters, which highlights effective control measures against dengue transmission. Moreover, by assuming temperature and precipitation dependent mosquito-related parameters, the model can be used to project the effectiveness of releasing Wolbachia-carrying males under climatic variations. It is shown that the effectiveness of various control strategies is highly dependent on the changing temperature and precipitation profiles. In particular, the model projects that it is most challenging to control the disease at the favorable temperature (around 27∼30 ∘ C) and precipitation (5∼8mm/day) range, during which the basic reproduction number R 0 is very high and more Wolbachia-infected males should be released., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Purpose: To compare machine learning (ML) models with logistic regression model in order to identify the optimal factors associated with mammography-occult (i.e. false-negative mammographic findings) magnetic resonance imaging (MRI)-detected newly diagnosed breast cancer (BC)., Material and Methods: The present single-centre retrospective study included consecutive women with BC who underwent mammography and MRI (no more than 45 days apart) for breast cancer between January 2018 and May 2023. Various ML algorithms and binary logistic regression analysis were utilized to extract features linked to mammography-occult BC. These features were subsequently employed to create different models. The predictive value of these models was assessed using receiver operating characteristic curve analysis., Results: This study included 1957 malignant lesions from 1914 patients, with an average age of 51.64 ± 9.92 years and a range of 20-86 years. Among these lesions, there were 485 mammography-occult BCs. The optimal features of mammography-occult BC included calcification status, tumour size, mammographic density, age, lesion enhancement type on MRI, and histological type. Among the different ML models (ANN, L1-LR, RF, and SVM) and the LR-based combined model, the ANN model with RF features was found to be the optimal model. It demonstrated the best discriminative performance in predicting mammography false- negative findings, with an AUC of 0.912, an accuracy of 86.90%, a sensitivity of 85.85%, and a specificity of 84.18%., Conclusion: Mammography-occult MRI-detected breast cancers have features that should be considered when performing breast MRI to improve the detection rate for breast cancer and aid in clinician management., (© 2024. Italian Society of Medical Radiology.)

The diversity of microalgae and bacteria allows them to form beneficial consortia for efficient wastewater treatment and nutrient recovery. This study aimed to evaluate the feasibility of a new microalgal-bacterial combination in the treatment of ice cream wastewater for biomass harvest. The bacterium Novosphingobium sp. ICW1 was natively isolated from ice cream wastewater and the microalga Vischeria sp. WL1 was a terrestrial oil-producing strain of Eustigmatophyceae. The ice cream wastewater was diluted 4 folds for co-cultivation, which was relatively less inhibitory for the growth of Vischeria sp. WL1. Four initial algal-bacterial combinations (v:v) of 150:0 (single algal cultivation), 150:1, 150:2, and 150:4 were assessed. During 24 days of co-cultivation, algal pigmentation was dynamically changed, particularly at the algal-bacterial combination of 150:4. Algal growth (in terms of cell number) was slightly promoted during the late phase of co-cultivation at the combinations of 150:2 and 150:4, while in the former the cellular oil yield was obviously elevated. Treated by these algal-bacterial combinations, total carbon was reduced by 67.5 ~ 74.5% and chemical oxygen demand was reduced by 55.0 ~ 60.4%. Although single bacterial treatment was still effective for removing organic nutrients, the removal efficiency was obviously enhanced at the algal-bacterial combination of 150:4. In addition, the harvested oils contained 87.1 ~ 88.3% monounsaturated fatty acids. In general, this study enriches the biotechnological solutions for the sustainable treatment of organic matter-rich food wastewater., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Within the family of two-dimensional dielectrics, rhombohedral boron nitride (rBN) is considerably promising owing to having not only the superior properties of hexagonal boron nitride 1-4 -including low permittivity and dissipation, strong electrical insulation, good chemical stability, high thermal conductivity and atomic flatness without dangling bonds-but also useful optical nonlinearity and interfacial ferroelectricity originating from the broken in-plane and out-of-plane centrosymmetry 5-23 . However, the preparation of large-sized single-crystal rBN layers remains a challenge 24-26 , owing to the requisite unprecedented growth controls to coordinate the lattice orientation of each layer and the sliding vector of every interface. Here we report a facile methodology using bevel-edge epitaxy to prepare centimetre-sized single-crystal rBN layers with exact interlayer ABC stacking on a vicinal nickel surface. We realized successful accurate fabrication over a single-crystal nickel substrate with bunched step edges of the terrace facet (100) at the bevel facet (110), which simultaneously guided the consistent boron-nitrogen bond orientation in each BN layer and the rhombohedral stacking of BN layers via nucleation near each bevel facet. The pure rhombohedral phase of the as-grown BN layers was verified, and consequently showed robust, homogeneous and switchable ferroelectricity with a high Curie temperature. Our work provides an effective route for accurate stacking-controlled growth of single-crystal two-dimensional layers and presents a foundation for applicable multifunctional devices based on stacked two-dimensional materials., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

Among the various two-dimensional (2D) materials, more than 99% of them are noncentrosymmetric. However, since the commonly used substrates are generally centrosymmetric, antiparallel islands are usually inevitable in the growth of noncentrosymmetric 2D materials because of the energetic equivalency of these two kinds of antiparallel islands on centrosymmetric substrates. Therefore, achieving the growth of noncentrosymmetric 2D single crystals has long been a great challenge compared with the centrosymmetric ones like graphene. In this review, we presented the remarkable efforts and progress in the past decade, through precise chemical processes. We first discussed the great challenge and possible strategies in the growth of noncentrosymmetric 2D single crystals. Then, we focused on the advancements made in producing representative noncentrosymmetric 2D single crystals, including hexagonal boron nitride (hBN), transition metal dichalcogenides (TMDs), and other noncentrosymmetric 2D materials. At last, we summarized and looked forward to future research on the growth of layer-, stacking-, and twist-controlled noncentrosymmetric 2D single crystals and their heterostructures., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Co-published by University of Science and Technology of China and American Chemical Society.)

The permeability and selectivity of biological and artificial ion channels correlate with the specific hydration structure of single ions. However, fundamental understanding of the effect of ion-ion interaction remains elusive. Here, via non-contact atomic force microscopy measurements, we demonstrate that hydrated alkali metal cations (Na + and K + ) at charged surfaces could come into close contact with each other through partial dehydration and water rearrangement processes, forming one-dimensional chain structures. We prove that the interplay at the nanoscale between the water-ion and water-water interaction can lead to an effective ion-ion attraction overcoming the ionic Coulomb repulsion. The tendency for different ions to become closely packed follows the sequence K +  > Na +  > Li + , which is attributed to their different dehydration energies and charge densities. This work highlights the key role of water molecules in prompting close packing and concerted movement of ions at charged surfaces, which may provide new insights into the mechanism of ion transport under atomic confinement., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

The properties of two-dimensional (2D) van der Waals materials can be tuned through nanostructuring or controlled layer stacking, where interlayer hybridization induces exotic electronic states and transport phenomena. Here we describe a viable approach and underlying mechanism for the assisted self-assembly of twisted layer graphene. The process, which can be implemented in standard chemical vapour deposition growth, is best described by analogy to origami and kirigami with paper. It involves the controlled induction of wrinkle formation in single-layer graphene with subsequent wrinkle folding, tearing and re-growth. Inherent to the process is the formation of intertwined graphene spirals and conversion of the chiral angle of 1D wrinkles into a 2D twist angle of a 3D superlattice. The approach can be extended to other foldable 2D materials and facilitates the production of miniaturized electronic components, including capacitors, resistors, inductors and superconductors., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

Nonlinear optical crystals lie at the core of ultrafast laser science and quantum communication technology. The emergence of 2D materials provides a revolutionary potential for nonlinear optical crystals due to their exceptionally high nonlinear coefficients. However, uncontrolled stacking orders generally induce the destructive nonlinear response due to the optical phase deviation in different 2D layers. Therefore, conversion efficiency of 2D nonlinear crystals is typically limited to less than 0.01% (far below the practical criterion of >1%). Here, crystalline films of rhombohedral boron nitride (rBN) with parallel stacked layers are controllably synthesized. This success is realized by the utilization of vicinal FeNi (111) single crystal, where both the unidirectional arrangement of BN grains into a single-crystal monolayer and the continuous precipitation of (B,N) source for thick layers are guaranteed. The preserved in-plane inversion asymmetry in rBN films keeps the in-phase second-harmonic generation field in every layer and leads to a record-high conversion efficiency of 1% in the whole family of 2D materials within the coherence thickness of only 1.6 µm. The work provides a route for designing ultrathin nonlinear optical crystals from 2D materials, and will promote the on-demand fabrication of integrated photonic and compact quantum optical devices., (© 2023 Wiley-VCH GmbH.)

Monolayer molybdenum disulfide (MoS 2 ), an emergent two-dimensional (2D) semiconductor, holds great promise for transcending the fundamental limits of silicon electronics and continue the downscaling of field-effect transistors. To realize its full potential and high-end applications, controlled synthesis of wafer-scale monolayer MoS 2 single crystals on general commercial substrates is highly desired yet challenging. Here, we demonstrate the successful epitaxial growth of 2-inch single-crystal MoS 2 monolayers on industry-compatible substrates of c-plane sapphire by engineering the formation of a specific interfacial reconstructed layer through the S/MoO 3 precursor ratio control. The unidirectional alignment and seamless stitching of MoS 2 domains across the entire wafer are demonstrated through cross-dimensional characterizations ranging from atomic- to centimeter-scale. The epitaxial monolayer MoS 2 single crystal shows good wafer-scale uniformity and state-of-the-art quality, as evidenced from the ~100% phonon circular dichroism, exciton valley polarization of ~70%, room-temperature mobility of ~140 cm 2 v -1 s -1 , and on/off ratio of ~10 9 . Our work provides a simple strategy to produce wafer-scale single-crystal 2D semiconductors on commercial insulator substrates, paving the way towards the further extension of Moore's law and industrial applications of 2D electronic circuits., (© 2024. The Author(s).)

Condensation and arrangement of ions at water-solid interfaces are of great importance in the formation of electrical double layers (EDL) and the transport of ions under a confined geometry. So far, the microscopic understanding of interfacial ion configurations is still far from complete, especially when the local ion concentration is high and ion-ion interactions become prominent. In this study, we directly visualized alkali metal cations within the hydrogen-bonding network of water on graphite and Cu(111)-supported graphene surfaces, using qPlus-based noncontact atomic force microscopy (NC-AFM). We found that the codeposition of the alkali cations and water molecules on the hydrophobic graphite surface leads to the formation of an ion-doped bilayer hexagonal ice (BHI) structure, where the ions are repelled from each other and scattered in a disordered distribution. In contrast, the hydrated alkali cations aggregate in one dimension on the more hydrophilic graphene/Cu(111) surface, forming a nematic state with a long-range order. Such a nematic state arises from the delicate interplay between water-ion and water-water interactions under surface confinement. These results reveal the high sensitivity of ion-ion interactions and ionic ordering to the surface hydrophobicity and hydrophilicity.

In forensics, it is important to determine the time since deposition (TSD) of bloodstains, one of the most common types of biological evidence in criminal cases. However, no effective TSD inference methods have been established despite extensive attempts in forensic science. Our study investigated the changes in the blood transcriptome over time, and we found that degradation could be divided into four stages (days 0-2, 4-14, 21-56, and 84-168) at 4 °C. A random forest prediction model based on these transcriptional changes was trained on experimental samples and tested in separate test samples. This model was able to successfully predict TSD (area under the curve [AUC] = 0.995, precision = 1, and recall = 1). Thus, this proof-of-concept pilot study has practical significance for assessing physical evidence. Meanwhile, 11 upregulated and 13 downregulated transcripts were identified as potential time-marker transcripts, laying a foundation for further development of TSD analysis methods in forensic science and crime scene investigation., Competing Interests: Declaration of Competing Interest The authors report no competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Infectious bronchitis (IB) is a highly infectious viral disease of chickens which causes significant economic losses in the poultry industry worldwide. An effective vaccine against IB is urgently needed to provide both biosafety and high-efficiency immune protection. In this study, the S1 protein of the infectious bronchitis virus was delivered by a recombinant attenuated Salmonella typhimurium vector to form the vaccine candidate χ11246(pYA4545-S1). S. typhimurium χ11246 carried a sifA - mutation with regulated delayed systems, striking a balance between host safety and immunogenicity. Here, we demonstrated that S1 protein is highly expressed in HD11 cells. Immunization with χ11246(pYA4545-S1) induced the production of antibody and cytokine, leading to an effective immune response against IB. Oral immunization with χ11246(pYA4545-S1) provided 72%, 56%, and 56% protection in the lacrimal gland, trachea, and cloaca against infectious bronchitis virus infection, respectively. Furthermore, it significantly reduced histopathological lesions in chickens. Together, this study provides a new idea for the prevention of IB.

Aspergillus montevidensis is an important domesticated fungus that has been applied to produce many traditional fermented foods under high osmotic conditions. However, the detailed mechanisms of tolerance to osmotic stress remain largely unknown. Here, we construct a target-deleted strain (Δ LeuRS ) of A . montevidensis and found that the Δ LeuRS mutants grew slowly and suppressed the development of the cleistothecium compared to the wide-type strains (WT) under salt-stressed and non-stressed conditions. Furthermore, differentially expressed genes ( p < 0.001) governed by LeuRS were involved in salt tolerance, ABC transporter, amino acid metabolism, sugar metabolism, and the reproduction process. The Δ LeuRS strains compared to WT strains under short- and long-term salinity stress especially altered accumulation levels of metabolites, such as amino acids and derivatives, carbohydrates, organic acids, and fatty acids. This study provides new insights into the underlying mechanisms of salinity tolerance and lays a foundation for flavor improvement of foods fermented with A . montevidensis .

The use of non-equilibrium growth modes with non-steady dynamics is extensively explored in bulk materials such as amorphous and polycrystalline materials. Yet, research into the non-steady-state (NSS) growth of two-dimensional (2D) materials is still in its infancy. In this study, multilayered tin selenide (SnSe 2 ) nanoplates are grown by chemical vapor deposition under NSS conditions (modulating carrier gas flow and temperature). Given the facile diffusion and inherent instability of SnSe 2 , it proves to be an apt candidate for nucleation and growth in NSS scenarios. This leads to the emergence of SnSe 2 nanoplates with distinct features (self-growth twisting, symmetry transformation, interlayer decoupling, homojunction, and large-area 2D domain), exhibiting pronounced second harmonic generation. The authors' findings shed light on the growth dynamics of 2D materials, broadening their potential applications in various fields., (© 2023 Wiley-VCH GmbH.)

Salt lakes are significant components of global inland waters. Salt lake (SL) water can provide precious mineral resource for microbial growth. The prospect of utilizing diluted SL water for cultivation of a terrestrial oil-producing microalga Vischeria sp. WL1 was evaluated under laboratory conditions. Based on the detected mineral element composition, the water from Gouchi Salt Lake was diluted 2, 4, 6 and 8 folds and used with supplementation of additional nitrogen, phosphorus and iron (SL + water). It was found that 4 folds diluted SL + water was most favorable for biomass and oil production. When cultivated in this condition, Vischeria sp. WL1 gained a biomass yield of 0.82 g L -1 and an oil yield of 0.56 g L -1 after 24 days of cultivation, which is comparable to the optimum productivity we previously established. In addition, total monounsaturated fatty acid contents (64.4∼68.1 %) of the oils resulted from cultures in diluted SL + waters were higher than that in the control (55.5 %). It was also noteworthy that in all these cultures the oil contents (652.0∼681.0 mg g -1 ) accounted for the most of the biomass, which are far more than the protein and starch contents. This study demonstrates the feasibility of using SL water as a cost-effective mineral resource to cultivate microalgae for biomass and oil production., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Author(s).)

Optical phase matching involves establishing a proper phase relationship between the fundamental excitation and generated waves to enable efficient optical parametric processes. It is typically achieved through birefringence or periodic polarization. Here, we report that the interlayer twist angle in two-dimensional (2D) materials creates a nonlinear geometric phase that can compensate for the phase mismatch, and the vertical assembly of the 2D layers with a proper twist sequence generates a nontrivial "twist-phase-matching" (twist-PM) regime. The twist-PM model provides superior flexibility in the design of optical crystals, which can be applied for twisted layers with either periodic or random thickness distributions. The designed crystal from the twisted rhombohedral boron nitride films within a thickness of only 3.2  μm is capable of producing a second-harmonic generation with conversion efficiency of ∼8% and facile polarization controllability that is absent in conventional crystals. Our methodology establishes a platform for the rational design and atomic manufacturing of nonlinear optical crystals based on abundant 2D materials.

The non-volatile magnetoresistive random access memory (MRAM) is believed to facilitate emerging applications, such as in-memory computing, neuromorphic computing and stochastic computing. Two-dimensional (2D) materials and their van der Waals heterostructures promote the development of MRAM technology, due to their atomically smooth interfaces and tunable physical properties. Here we report the all-2D magnetoresistive memories featuring all-electrical data reading and writing at room temperature based on WTe 2 /Fe 3 GaTe 2 /BN/Fe 3 GaTe 2 heterostructures. The data reading process relies on the tunnel magnetoresistance of Fe 3 GaTe 2 /BN/Fe 3 GaTe 2 . The data writing is achieved through current induced polarization of orbital magnetic moments in WTe 2 , which exert torques on Fe 3 GaTe 2 , known as the orbit-transfer torque (OTT) effect. In contrast to the conventional reliance on spin moments in spin-transfer torque and spin-orbit torque, the OTT effect leverages the natural out-of-plane orbital moments, facilitating field-free perpendicular magnetization switching through interface currents. Our results indicate that the emerging OTT-MRAM is promising for low-power, high-performance memory applications., Competing Interests: Conflict of interest The authors declare that they have no conflict of interest., (Copyright © 2023 Science China Press. Published by Elsevier B.V. All rights reserved.)

The atomic-thick anticorrosion coating for copper (Cu) electrodes is essential for the miniaturisation in the semiconductor industry. Graphene has long been expected to be the ultimate anticorrosion material, however, its real anticorrosion performance is still under great controversy. Specifically, strong electronic couplings can limit the interfacial diffusion of corrosive molecules, whereas they can also promote the surficial galvanic corrosion. Here, we report the enhanced anticorrosion for Cu simply via a bilayer graphene coating, which provides protection for more than 5 years at room temperature and 1000 h at 200 °C. Such excellent anticorrosion is attributed to a nontrivial Janus-doping effect in bilayer graphene, where the heavily doped bottom layer forms a strong interaction with Cu to limit the interfacial diffusion, while the nearly charge neutral top layer behaves inertly to alleviate the galvanic corrosion. Our study will likely expand the application scenarios of Cu under various extreme operating conditions., (© 2023. The Author(s).)

Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-functional graphene/silicon (Gra/Si) heterojunctions. With optical modulation and detection in one device, time delays are shorter, energy consumption is lower, reconfigurability is higher and the device footprint is smaller than other on-chip AF strategies. The experimental modulation voltage (power) of our Gra/Si heterojunction achieves as low as 1 V (0.5 mW), superior to many pure silicon counterparts. In the photodetection aspect, a high responsivity of over 200 mA/W is realized. Special nonlinear functions generated are fed into a complex-valued ONN to challenge handwritten letters and image recognition tasks, showing improved accuracy and potential of high-efficient, all-component-integration on-chip ONN. Our results offer new insights for on-chip ONN devices and pave the way to high-performance integrated optoelectronic computing circuits., (© 2023. The Author(s).)

Femtosecond laser-driven photoemission source provides an unprecedented femtosecond-resolved electron probe not only for atomic-scale ultrafast characterization but also for free-electron radiation sources. However, for conventional metallic electron source, intense lasers may induce a considerable broadening of emitting energy level, which results in large energy spread (>600 milli-electron volts) and thus limits the spatiotemporal resolution of electron probe. Here, we demonstrate the coherent ultrafast photoemission from a single quantized energy level of a carbon nanotube. Its one-dimensional body can provide a sharp quantized electronic excited state, while its zero-dimensional tip can provide a quantized energy level act as a narrow photoemission channel. Coherent resonant tunneling electron emission is evidenced by a negative differential resistance effect and a field-driven Stark splitting effect. The estimated energy spread is ~57 milli-electron volts, which suggests that the proposed carbon nanotube electron source may promote electron probe simultaneously with subangstrom spatial resolution and femtosecond temporal resolution.

Controllable growth of two-dimensional (2D) single crystals on insulating substrates is the ultimate pursuit for realizing high-end applications in electronics and optoelectronics. However, for the most typical 2D insulator, hexagonal boron nitride (hBN), the production of a single-crystal monolayer on insulating substrates remains challenging. Here, we propose a methodology to realize the facile production of inch-sized single-crystal hBN monolayers on various insulating substrates by an atomic-scale stamp-like technique. The single-crystal Cu foils grown with hBN films can stick tightly (within 0.35 nm) to the insulating substrate at sub-melting temperature of Cu and extrude the hBN grown on the metallic surface onto the insulating substrate. Single-crystal hBN films can then be obtained by removing the Cu foil similar to the stamp process, regardless of the type or crystallinity of the insulating substrates. Our work will likely promote the manufacturing process of fully single-crystal 2D material-based devices and their applications., (© 2023. Springer Nature Limited.)

Several safe and effective vaccines are available to prevent individuals from experiencing severe illness or death as a result of COVID-19. Widespread vaccination is widely regarded as a critical tool in the fight against the disease. However, some individuals may choose not to vaccinate due to vaccine hesitancy or other medical conditions. In some sectors, regular compulsory testing is required for such unvaccinated individuals. Interestingly, different sectors require testing at various frequencies, such as weekly or biweekly. As a result, it is essential to determine the optimal testing frequency and identify underlying factors. This study proposes a population-based model that can accommodate different personal decision choices, such as getting vaccinated or undergoing regular tests, as well as vaccine efficacies and uncertainties in epidemic transmission. The model, formulated as impulsive differential equations, uses time instants to represent the reporting date for the test result of an unvaccinated individual. By employing well-accepted indices to measure transmission risk, including the basic reproduction number, the peak time, the final size, and the number of severe infections, the study shows that an optimal testing frequency is highly sensitive to parameters involved in the transmission process, such as vaccine efficacy, disease transmission rate, test accuracy, and existing vaccination coverage. The testing frequency should be appropriately designed with the consideration of all these factors, as well as the control objectives measured by epidemiological quantities of great concern., (© 2023. The Author(s), under exclusive licence to Society for Mathematical Biology.)

Photonic crystal fiber (PCF) embedded with functional materials has demonstrated diverse applications ranging from ultrafast lasers, optical communication to chemical sensors. Many efforts have been made to fabricating carbon nanotube (CNT) based optical fibers by ex situ transfer method; however, often suffer poor uniformity and coverage. Here, the direct growth of CNTs on the inner walls of PCFs by the chemical vapor deposition (CVD) method is reported. A two-step growth method is developed to control the narrow diameter distribution of CNTs to ensure desirable nanotube optical transitions. In the as-fabricated CNT- embedded fiber, third-harmonic generation (THG) has been enhanced by ≈15 times compared with flat CNT film on fused silica. A dual-wavelength all-fiber mode-locked ultrafast laser (≈1561 and ≈1064 nm) is further demonstrated by integrating the 1.36±0.15 nm-diameter CNTs into two kinds of photonic bandgap hollow core PCF (named HC-1550 and HC-1060) as saturable absorbers, using their S 11 (≈0.7 eV) and S 22 (≈1.2 eV) interband transition respectively. The fiber laser shows stable output of ≈10 mW, ≈800 fs pulse width, and ≈71 MHz repetition rate at 1561 nm wavelength. These results can enable the large-scale applications of CNTs in PCF-based optical devices., (© 2023 Wiley-VCH GmbH.)

Transferred graphene provides a promising III-nitride semiconductor epitaxial platform for fabricating multifunctional devices beyond the limitation of conventional substrates. Despite its tremendous fundamental and technological importance, it remains an open question on which kind of epitaxy is preferred for single-crystal III-nitrides. Popular answers to this include the remote epitaxy where the III-nitride/graphene interface is coupled by nonchemical bonds, and the quasi-van der Waals epitaxy (quasi-vdWe) where the interface is mainly coupled by covalent bonds. Here, we show the preferred one on wet-transferred graphene is quasi-vdWe. Using aluminum nitride (AlN), a strong polar III-nitride, as an example, we demonstrate that the remote interaction from the graphene/AlN template can inhibit out-of-plane lattice inversion other than in-plane lattice twist of the nuclei, resulting in a polycrystalline AlN film. In contrast, quasi-vdWe always leads to single-crystal film. By answering this long-standing controversy, this work could facilitate the development of III-nitride semiconductor devices on two-dimensional materials such as graphene.

Sensors, the underlying technology that supports the Internet of Things, are undergoing multi-disciplinary integration development to constantly improve the efficiency of human production and life. Simultaneously, the application scenarios in emerging fields such as medical diagnosis, environmental monitoring and industrial safety put forward higher requirements for sensing capabilities. Over the last decade, single-atom catalysts (SACs) have attracted tremendous attention in fields such as environment and energy due to their high atom utilization efficiencies, controllable active sites, tailorable coordination environments and structural/chemical stability. These extraordinary characteristics extend the sensitivity and selectivity of sensors beyond their current limitations. Here, we start with the working principles of SAC-based sensors, and summarize the relationship between sensor performance and intrinsic properties of SACs, followed by an overview of the design strategy development. We then review the recent advances in SAC-based sensors in different fields and highlight the future opportunities and challenges in their exciting applications.

Two-dimensional (2D) transition metal dichalcogenides (TMDs) are regarded as pivotal semiconductor candidates for next-generation devices due to their atomic-scale thickness, high carrier mobility and ultrafast charge transfer. In analog to the traditional semiconductor industry, batch production of wafer-scale TMDs is the prerequisite to proceeding with their integrated circuits evolution. However, the production capacity of TMD wafers is typically constrained to a single and small piece per batch (mainly ranging from 2 to 4 inches), due to the stringent conditions required for effective mass transport of multiple precursors during growth. Here we developed a modularized growth strategy for batch production of wafer-scale TMDs, enabling the fabrication of 2-inch wafers (15 pieces per batch) up to a record-large size 12-inch wafers (3 pieces per batch). Each module, comprising a self-sufficient local precursor supply unit for robust individual TMD wafer growth, is vertically stacked with others to form an integrated array and thus a batch growth. Comprehensive characterization techniques, including optical spectroscopy, electron microscopy, and transport measurements unambiguously illustrate the high-crystallinity and the large-area uniformity of as-prepared monolayer films. Furthermore, these modularized units demonstrate versatility by enabling the conversion of as-produced wafer-scale MoS 2 into various structures, such as Janus structures of MoSSe, alloy compounds of MoS 2(1- x ) Se 2 x , and in-plane heterostructures of MoS 2 -MoSe 2 . This methodology showcases high-quality and high-yield wafer output and potentially enables the seamless transition from lab-scale to industrial-scale 2D semiconductor complementary to silicon technology., Competing Interests: Conflict of interest The authors declare that they have no conflict of interest., (Copyright © 2023 Science China Press. Published by Elsevier B.V. All rights reserved.)

In twisted h-BN/graphene heterostructures, the complex electronic properties of the fast-traveling electron gas in graphene are usually considered to be fully revealed. However, the randomly twisted heterostructures may also have unexpected transition behaviors, which may influence the device performance. Here, we study the twist-angle-dependent coupling effects of h-BN/graphene heterostructures using monochromatic electron energy loss spectroscopy. We find that the moiré potentials alter the band structure of graphene, resulting in a redshift of the intralayer transition at the M point, which becomes more pronounced up to 0.22 eV with increasing twist angle. Furthermore, the twisting of the Brillouin zone of h-BN relative to the graphene M point leads to tunable vertical transition energies in the range of 5.1-5.6 eV. Our findings indicate that twist-coupling effects of van der Waals heterostructures should be carefully considered in device fabrications, and the continuously tunable interband transitions through the twist angle can serve as a new degree of freedom to design optoelectrical devices.

Raman spectroscopy, a nondestructive fingerprinting technique, is mainly utilized to identify molecular species and phonon modes of materials. However, direct Raman characterization of two-dimensional materials typically synthesized on catalytic metal substrates is extremely challenging because of the significant electric screening and interfacial electronic couplings. Here, we demonstrate that by covering as-grown graphene with boron nitride (BN) films, the Raman intensity of graphene can be enhanced by two orders of magnitude and is also several times stronger than that of suspended graphene. This great Raman enhancement originates from the optical field amplification by Fabry-Pérot cavity in BN films and the local field plasmon near copper steps. We further demonstrate the direct characterization of the local strain and doping level of as-grown graphene and in situ monitoring of the molecule reaction process by enhanced Raman spectroscopy. Our results will broaden the optical investigations of interfacial sciences on metals, including photoinduced charge transfer dynamics and photocatalysis at metal surfaces.