Search

Decellularized marine tissues have been regarded as a desirable biomaterial because of their biological risk reduction, less religious constraints, and resemblance to mammalian tissues. The properties of these matrices can be improved by adding cross-linkers. In this study, after decellularization of the of Tilapia and Grass carp fish skin, a comparative study was conducted between them. Due to the higher abundance of collagen and glycosaminoglycans (GAGs) in Tilapia skin, it was selected for further study. In the next step, the cross-linking process was performed with three concentrations of 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide/ N-Hydroxysuccinimide (EDC/NHS) and tannic acid cross-linkers. The MTT results showed that the cross-linked samples with low concentrations of EDC/NHS had higher biocompatibility compared to the cross-linked sample with high concentration of EDC/NHS, as well as all samples cross-linked with tannic acid. Mechanical and physical studies conducted on the skin of Tilapia fish showed that the 15 mM/7.5 mM concentration of EDC/NHS increased the mechanical and temperature strength and decreased the degradability and it did not influence cell attachment. In general, it was shown that different fish skins differ in terms of collagen and GAGs, and the optimal concentration of EDC cross-linker improves the mechanical and physical properties of the matrix derived from fish skin., Competing Interests: Conflict of Interest Statement The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: To address the limitations of Cultivated Limbal Epithelial Transplantation (CLET) and the use of amniotic membrane (AM) in treating Limbal Stem Cell Deficiency (LSCD), we aimed to develop a Collagen/Silk Fibroin (Co/SF) scaffold enriched with Platelet-Rich Growth Factor (PRGF) to support the proliferation, maintenance, and differentiation of Wharton's jelly-derived mesenchymal stem cells (WJMSCs) into corneal epithelial cells (CECs)., Method: Scaffolds loaded with PRGF were evaluated through release studies, cytotoxicity assays, and cell differentiation. The proliferation and differentiation of WJMSCs and Limbal Epithelial Stem Cells (LESCs) were investigated using MTT assays, real-time PCR and immunostaining., Results: The PRGF-loaded Co/SF scaffold significantly promoted the proliferation of both WJMSCs and LESCs in a concentration-dependent manner. Real-time PCR and immune staining revealed a significant increase in the expression of P63, ABCG2, and cytokeratin 3/12 markers in WJMSCs, a significant decrease in the expression of P63 and ABCG2, and a significant increase in the expression of cytokeratin 3/12 markers indicating successful differentiation into CECs., Conclusion: The WJMSC cultured on PRGF-enriched Co/SF scaffold demonstrates potential as a viable alternative to conventional CLET, offering a promising strategy for corneal tissue regeneration.

Natural-derived biomaterials can be used as substrates for the growth, proliferation, and differentiation of cells. In this study, bovine vitreous humor as a biological material was cross-linked to silk fibroin with different concentration ratios to design a suitable substrate for corneal tissue regeneration. The cross-linked samples were evaluated with different analyses such as structural, physical (optical, swelling, and degradation), mechanical, and biological (viability, cell adhesion) assays. The results showed that all samples had excellent transparency, especially those with higher silk fibroin content. Increasing the ratio of vitreous humor to silk fibroin decreased mechanical strength and increased swelling and degradation, respectively. There was no significant difference in the toxicity of the samples, and with the increase in vitreous humor ratio, adhesion and cell proliferation increased. Generally, silk fibroin with vitreous humor can provide desirable characteristics as a transparent film for corneal wound healing., (© 2024 Wiley Periodicals LLC.)

While significant progress has been made in creating polymeric structures for tissue engineering, the therapeutic application of these scaffolds remains challenging owing to the intricate nature of replicating the conditions of native organs and tissues. The use of human-derived biomaterials for therapeutic purposes closely imitates the properties of natural tissue, thereby assisting in tissue regeneration. Decellularized extracellular matrix (dECM) scaffolds derived from natural tissues have become popular because of their unique biomimetic properties. These dECM scaffolds can enhance the body's ability to heal itself or be used to generate new tissues for restoration, expanding beyond traditional tissue transfers and transplants. Enhanced knowledge of how ECM scaffold materials affect the microenvironment at the injury site is expected to improve clinical outcomes. In this review, recent advancements in dECM scaffolds are explored and relevant perspectives are offered, highlighting the development and application of these scaffolds in tissue engineering for various organs, such as the skin, nerve, bone, heart, liver, lung, and kidney., (© 2024 Wiley‐VCH GmbH.)

Platelet-rich fibrin (PRF), which is the rich source of growth factors, has been used as an efficient scaffold in tissue engineering and wound healing. In this study, tannic acid as a green cross-linker with different concentrations (0.5%, 1%, 5% and 10%) was used to improve the properties of PRF. The cross-linked gel scaffolds were evaluated by analyses such as scanning electron microscopy, Fourier transform infrared spectroscopy, swelling and degradation, mechanical strength, cell toxicity, cell adhesion and antibacterial test. The results showed that the scaffold structure changes by increasing cross-linker concentration. The swelling rate decreased from 49% to 5% for the samples without the cross-linker and with tannic acid (10%), respectively. The degradation percentage for the cross-linked samples was 8%, which showed a lower degradation rate than the non-cross-linked samples (63%). The mechanical strength of the scaffold with the cross-linker increased up to three times (Young's modulus for the non-cross linked and the cross-linked samples: 0.01 and 0.6 MPa, respectively). Cytotoxicity was not observed up to 10% cross-linker concentration. The cells proliferated well on the cross-linked scaffolds and also showed a good antibacterial effect. In general, tannic acid can improve the physical and mechanical properties of PRF without negatively affecting its biological properties., (© 2023 The Authors. International Wound Journal published by Medicalhelplines.com Inc and John Wiley & Sons Ltd.)

Cold atmospheric plasma (CAP) is an ionized matter with potential applications in various medical fields, ranging from wound healing and disinfection to cancer treatment. CAP's clinical usefulness stems from its ability to act as an adjustable source of reactive oxygen and nitrogen species (RONS), which are known to function as pleiotropic signaling agents within cells. Plasma-activated species, such as RONS, have the potential to be consistently and precisely released by carriers, enabling their utilization in a wide array of biomedical applications. Furthermore, understanding the behavior of CAP in different environments, including water, salt solutions, culture medium, hydrogels, and nanoparticles, may lead to new opportunities for maximizing its therapeutic potential. This review article sought to provide a comprehensive and critical analysis of current biomaterial approaches for the targeted delivery of plasma-activated species in the hope to boost therapeutic response and clinical applicability., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Fish skin grafting as a new skin substitute is currently being used in clinical applications. Acceleration of the wound healing, lack of disease transmission, and low cost of the production process can introduce fish skin as a potential alternative to other grafts. An appropriate decellularization process allows the design of 3D acellular scaffolds for skin regeneration without damaging the morphology and extracellular matrix content. Therefore, the role of decellularization processes is very important to maintain the properties of fish skin. In this review article, recent studies on various decellularization processes as well as biological, physical, and mechanical properties of fish skin and its applications with therapeutic effects in wound healing were investigated., (© 2023 The Authors. International Wound Journal published by Medicalhelplines.com Inc and John Wiley & Sons Ltd.)

Biological matrices can be modified with cross-linkers to improve some of their characteristics as scaffolds for tissue engineering. In this study, chemical cross-linker 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) was used with different ratios (5, 10, 20, 30, and 40 mM) to improve properties such as mechanical strength, denaturation temperature, and degradability of the acellular fish skin as a biological scaffold for tissue engineering applications. Morphological analysis showed that the use of cross-linker at low concentrations had no effect on the structure and textiles of the scaffold, while increasing mechanical strength, denaturation temperature, and degradation time. Cytotoxicity and cellular studies showed that the optimal cross-linker concentration did not significantly affect cell viability as well as cell adhesion. In general, utilising the carbodiimide cross-linker with the optimal ratio can improve the characteristics and function of the biological tissues such as acellular fish skin., (© 2022 The Authors. International Wound Journal published by Medicalhelplines.com Inc (3M) and John Wiley & Sons Ltd.)

Hemorrhage control is vital for clinical outcomes after surgical treatment and pre-hospital trauma injuries. Numerous biomaterials have been investigated to control surgical and traumatic bleeding. In this study, for the first time, perlite was introduced as an aluminosilicate biomaterial and compared with other ceramics such as kaolin and bentonite in terms of morphology, cytotoxicity, mutagenicity, and hemostatic evaluations. Cellular studies showed that perlite has excellent viability, good cell adhesion, and high anti-mutagenicity. Coagulation results demonstrated that the shortest clotting time (140 seconds with a concentration of 50 mg mL -1 ) was obtained for perlite samples compared to other samples. Therefore, perlite seems most efficient as a biocompatible ceramic for hemorrhage control and other biomaterial designs., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (This journal is © The Royal Society of Chemistry.)

Natural biomaterials are crucial in ocular tissue engineering because they allow cells to proliferate, differentiate, and stratify while maintaining the typical epithelial phenotype. In this study, membranes as dressings were formed from silk fibroin and collagen (Co) extracted from fish skin and then modified with carbodiimide chemical cross linker in different concentrations. The samples were evaluated by different analyses such as structural, physical (optical, swelling, denaturation temperature, degradation), mechanical, and biological (viability, cell adhesion, immunocytochemistry) assays. The results showed that all membranes have excellent transparency, especially with higher silk fibroin content. Increasing the cross linker concentration and the ratio of silk fibroin to Co increased the denaturation temperature and mechanical strength and, conversely, reduced the degradation rate and cell adhesion. The samples did not show a significant difference in toxicity with increasing cross linker and silk fibroin ratio. In general, samples with a low silk fibroin ratio combined with cross linker can provide desirable properties as a membrane for corneal wound healing., (© 2022 The Authors. International Wound Journal published by Medicalhelplines.com Inc (3M) and John Wiley & Sons Ltd.)

Plant-derived tannic acid as a green material can play an important role in improving the mechanical and physical properties of biomaterials. Tannic acid can be used as an antioxidant, antimicrobial, and cross-linking agent in biomaterial products due to its unique functional groups. Its active phenolic groups can react with biomaterial functional groups to form bonds that improve performance. In this review, the mechanism of effectiveness of tannic acid as a natural crosslinker in improving the properties of biomaterials for various applications, such as tissue engineering, tissue adhesives, drug delivery, wound healing, and toxicity studies, has been investigated. In general, tannic acid can be a suitable alternative to synthetic crosslinkers in biomaterial applications., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Acellular skin as a scaffold has a good potential to regenerate or repair damaged tissues. Growth factors such as Plasma Rich in Growth Factor (PRGF) as a rich source of active proteins can accelerate tissue regeneration. In this study, an acellular scaffold derived from fish skin with growth factors was used to repair full-thickness skin defects in a rat model. Cellular results demonstrated that epithelial cells adhere well to acellular scaffolds. The results of animal studies showed that the groups treated with acellular scaffold and growth factor have a high ability to close and heal wounds on the 28th day after surgery. Histological and staining results showed that in the treated groups with scaffold and growth factor, an epidermal layer was formed with some skin appendages similar to normal skin. Overall, such scaffolds with biological agents can cause an acceptable synergistic effect on skin regeneration and wound healing., (© 2022 The Authors. International Wound Journal published by Medicalhelplines.com Inc (3M) and John Wiley & Sons Ltd.)

Platelet-rich fibrin (PRF) as a rich source of effective growth factors has been used as a scaffold in tissue regeneration. It is known that PRF exhibits rapid degradability against enzymes, which should be decreased using crosslinking agents to reduce the release rate of growth factors and increase the effectiveness of tissue regeneration. In this study, a carbodiimide crosslinker with different concentrations (0.01%, 0.05%, 1%, and 2%) was used to modify and improve the properties of PRF gel. The crosslinked gels were evaluated with analyses such as SEM, swelling, degradability, mechanical strength, release test, cytotoxicity, and cell adhesion. The results showed that with increasing crosslinker concentration, the morphology of the fiber structure changes drastically, the swelling rate decreases from 300% (control) to 160% for the crosslinked gel, the degradation time for the control sample increases from 8 days to more than two weeks for the crosslinked gel, and the Young's modulus increases from 0.15 MPa (control) to 0.61 MPa for the crosslinked samples. Growth factors also showed lower release with increasing crosslinking ratio. Cytotoxicity assays demonstrated that by increasing the crosslinker concentration to 1% w/v, no cytotoxicity was observed. Cellular studies with DAPI staining showed that the cells penetrated well into the gels and were well distributed, especially in gels with lower crosslinker concentrations. In addition, the modified PRF gel can be used as a scaffold for tissue regeneration., Competing Interests: The authors state no conflict of interest and have received no payment in the preparation of this manuscript., (This journal is © The Royal Society of Chemistry.)

For many years, discovering the appropriate methods for the treatment of skin irritation has been challenging for specialists and researchers. Bio-printing can be extensively applied to address the demand for proper skin substitutes to improve skin damage. Nowadays, to make more effective biomimicry of natural skin, many research teams have developed cell-seeded bio-inks for bioprinting of skin substitutes. These loaded cells can be single or co-cultured in these structures. The present review gives a comprehensive overview of the methods, substantial parameters of skin bioprinting, examples of in vitro and in vivo studies, and current advances and challenges in skin tissue engineering., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Light can act as an effective and strong agent for the cross-linking of biomaterials and tissues and is recognized as a safe substitute for chemical cross-linkers to modify mechanical and physical properties and promote biocompatibility. This review focuses on the research about crosslinked biomaterials with different radiation sources such as Laser or ultraviolet (UV) that can be applied as scaffolds, controlled release systems,and tissue adhesives for cornea healing and tissue regeneration., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Nowadays, viral infections are one of the greatest challenges for medical sciences and human society. While antiviral compounds and chemical inactivation remain inadequate, physical approaches based on irradiation provide new potentials for prevention and treatment of viral infections, without the risk of drug resistance and other unwanted side effects. Light across the electromagnetic spectrum can inactivate the virions using ionizing and non-ionizing radiations. This review highlights the anti-viral utility of radiant methods from the aspects of ionizing radiation, including high energy ultraviolet, gamma ray, X-ray, and neutron, and non-ionizing photo-inactivation, including lasers and blue light., Competing Interests: Competing interests Dayong Jin is an Editor for the journal, no other author has reported any competing interest., (© The Author(s) 2022.)

The use of decellularized natural skin as an extracellular matrix (ECM) may be a great candidate to regenerate damaged tissues. In this study, decellularized scaffolds from fish skin were designed by different techniques (physical, chemical, and enzymatic methods) and investigated by analyses such as Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Tensile strength, Degradability, Histological studies, Toxicity test, and Determination of DNA content. Results showed that the best sample is related to the decellularized skin by hypertonic & hypotonic technique and Triton X100 solutions. Structural and mechanical results were demonstrated that samples have similar properties to human skin to regenerate it. The cytotoxicity results showed that decellularized skin by hypertonic & hypotonic method and Triton solution is non-toxic with minimal amount of genetic materials. Cellular results with epithelial cells indicated good adhesion on decellularized matrix, so it can be a suitable candidate for skin tissue regeneration., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Microorganisms such as bacteria and their derived biopolymers can be used in biomaterials and tissue regeneration. Various methods have been applied to regenerate damaged tissues, but using probiotics and biomaterials derived from bacteria with improved economic-production efficiency and highly applicable properties can be a new solution in tissue regeneration. Bacteria can synthesize numerous types of biopolymers. These biopolymers possess many desirable properties such as biocompatibility and biodegradability, making them good candidates for tissue regeneration. Here, we reviewed different types of bacterial-derived biopolymers and highlight their applications for tissue regeneration.

Abstract: Alternative treatment approaches to improve the regeneration ability of damaged peripheral nerves are currently under investigation. The aim of the current study was to evaluate the effects of leucocyte/platelet-rich fibrin (L-PRF) with or without a collagen membrane as a supporter on crushed sciatic nerve healing in a rat model. Recovery of motor function and electrophysiologic measurements were evaluated at 4 weeks postoperatively. The whole number of myelinated axons, peripheral nerve axon density, average nerve fiber diameter (μm), and G-ratio were analyzed and compered among the groups. Functional, electrophysiological, and histological evaluations showed no significant difference among the groups with the exception of the L-PRF with collagen membrane groups that showed relatively positive effects on the functional and histological nerve recovery. In addition, the collagen membrane with L-PRF can be effect in nerve regeneration., Competing Interests: The authors report no conflicts of interest., (Copyright © 2020 by Mutaz B. Habal, MD.)

The current study deals with the preparation and characterization of polysaccharide-based biocomposite films acquired by the incorporation of cellulose nanofiber within glycerol plasticized matrix formed by starch. The application of starch-based films is limited due to highly hydrophilic nature and poor mechanical properties. These problems are solved by forming a nanocomposite of thermoplastic starch (TPS) as matrix and cellulose nanofiber (CNF) as reinforcement. CNF is successfully prepared from short henequen fibers which consist of almost 60% cellulose by a chemo-mechanical process. TPS/CNF composite films are prepared by the polymer solution casting method, and their characterizations are obtained by water vapor transmission rate (WVTR), atomic force microscopy (AFM), oxygen transmission rate (OTR), X-ray diffraction, light transmittance and tensile test. The 0.4 wt% CNF loaded TPS films showed approximately the maximum improvement in tensile strength. Tensile strength and elastic modulus increased by up to 80% and 170% respectively. Above 0.5 wt% CNF, tensile strength starts to deteriorate. WVTR and OTR results show improvement in water vapor barrier properties of TPS matrix. The AFM analysis shows the topography of the surface of the nanocomposite. The morphology of nanofibers is studied by using the scanning electron microscopy (SEM) and the transmission electron microscopy (TEM)., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Background: Collagen and chondroitin sulfate (CS) are an essential component of the natural extracellular matrix (ECM) of most tissues. They provide the mechanical stability to cone the compressive forces in ECM. In tissue engineering, electrospun nanofibrous scaffolds prepared by electrospinning technique have emerged as a suitable candidate to imitate natural ECM functions. Cross-linking with 1-ethyl-3-(3-dimethyl-aminopropyl)-1-carbodiimide hydrochloride/ N -hydroxy succinimide can overcome the weak mechanical integrity of the engineered scaffolds in addition to the increased degradation stability under physiological conditions., Materials and Methods: This study has synthesized nanofibrous collagen-CS scaffolds by using the electrospinning method., Results: The results have shown that incorporation of CS in higher concentration, along with 1-ethyl-3-(3-dimethyl-aminopropyl)-1-carbodiimide hydrochloride/ N -hydroxy succinimide, enhanced mechanical stability. Scaffolds showed more resistance to collagenase digestion. Fabricated scaffolds showed biocompatibility in corneal epithelial cell attachment., Conclusion: These results demonstrate that cross-linked electrospun CO-CS mats exhibited a uniform nanofibrous and porous structure, especially for lower concentration of the cross-linker and may be utilized as an alternative effective substrate in tissue engineering., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

In the last decade, the use of new technologies in the reconstruction of body tissues has greatly developed. Utilising stem cell technology, nanotechnology and scaffolding design has created new opportunities in tissue regeneration. The use of accurate engineering design in the creation of scaffolds, including 3D printers, has been widely considered. Three-dimensional printers, especially high precision bio-printers, have opened up a new way in the design of 3D tissue engineering scaffolds. In this article, a review of the latest applications of this technology in this promising area has been addressed.

A nanofibrous silk nerve conduit has been evaluated for its efficiency based on the promotion of peripheral nerve regeneration in rats. The designed tubes with or without Schwann cells were implanted into a 10 mm gap in the sciatic nerves of the rats. Four months after the surgery, the regenerated nerves were monitored and evaluated by macroscopic assessments and histology. The results demonstrated that the nanofibrous grafts, especially in the presence of Schwann cells, enabled reconstruction of the rat sciatic nerve trunk with a restoration of nerve continuity and formation of nerve fibres with myelination. Histological data demonstrated the presence of Schwann and glial cells in regenerated nerves. This study strongly supports the feasibility of using artificial nerve grafts for peripheral nerve regeneration by bridging large defects in a rat model.

Surface modification of medical polymers is carried out to improve biocompatibility. In this study, conventional polymers (chitosan and polypropylene) were modified to laser at different features (oriented and non-oriented) to create a vast range of physicochemical characteristics on the surface of polymers and investigate their effects on biocompatibility of treated surfaces. Atomic force microscope (AFM) was applied to study the morphology of treated samples in comparison with those of the untreated PS. Contact angle analyses were used to evaluate the wettability and surface energy of the treated films. AFM studies showed that after laser treatment, some distinctive nanostructures are created on the surface of polymers. The data from contact angle measurements demonstrated that laser irradiation created surfaces with a vast range of properties in the wettability point of view. The cellular results revealed that after surface modification by laser irradiation, biocompatibility of polymeric films, especially oriented films was enhanced.

The aim of this study was to develop nanofibrous gelatin substrates for eyelid fat stem cell (EFSC) expansion that can serve as a potential alternative substrate to replace human amniotic membrane. Biocompatibility results indicated that all substrates were highly biocompatible, as EFSCs could favorably attach and proliferate on the nanofibrous surfaces. Microscopic figures showed that the EFSC were firmly anchored to the substrates and were able to retain a normal stem cell phenotype. Immunocytochemistry (ICC) and real time-PCR results revealed change in the expression profile of EFSCs grown on nanofibrous substrates when compared to those grown on control in epithelial induction condition. In addition, electrospun gelatin mats especially oriented scaffold provides not only a milieu supporting EFSCs expansion, but also serves as a useful alternative carrier for ocular surface tissue engineering and could be used as an alternative substrate to amniotic membrane.

Unrestricted somatic stem cells (USSCs) loaded in nanofibrous polycaprolactone (PCL) scaffolds can be used for skin regeneration when grafted onto full-thickness skin defects of rats. Nanofibrous PCL scaffolds were designed by the electrospinning method and crosslinked with laminin protein. Afterwards, the scaffolds were evaluated by scanning electron microscopy, and physical and mechanical assays. In this study, nanofibrous PCL scaffolds loaded with USSCs were grafted onto the skin defects. The wounds were subsequently investigated 21 days after grafting. Results of mechanical and physical analyses showed good resilience and compliance to movement as a skin graft. In animal models; study samples exhibited the most pronounced effect on wound closure, with statistically significant improvement in wound healing being seen at 21 days post-operatively. Histological examinations of healed wounds from all samples showed a thin epidermis plus recovered skin appendages in the dermal layer for samples with cell. Thus, the graft of nanofibrous PCL scaffolds loaded with USSC showed better results during the healing process of skin defects in rat models.

Single-wall carbon nanotubes (SWCNT) represent a novel nanomaterial applied in various nanotechnology fields because of their surface chemistry properties and high drug cargo capacity. In this study, SWCNT are pre-functionalized covalently with paclitaxel (PTX) - an anticancer drug, and folic acid (FA), as a targeting agent for many tumors. The samples are investigated and evaluated by different analyses such as Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), absorption spectroscopic measurements (UV-Visible), elemental analysis, and cell analyses with cancer cell line cultures. The results show good conjugation of the targeting molecule and the anticancer drug on the surface of the carbon nanotubes (CNT). This work demonstrates that the SWCNT-PTX-FA system is a potentially useful system for the targeted delivery of anticancer drugs.

Magnetic separation has numerous advantages in isolating cancerous and normal cells used in the diagnosis and treatment sectors. Here, we produced magnetic nanocomposite films made of polyhydroxybutyrate (PHB)/magnetite nanoparticles (γ-Fe2O3), and the properties of the films by SEM, TEM, FTIR, DMTA, contact angle, and cellular analyses were investigated. The microscopic images showed uniform distribution of γ-Fe2O3 magnetic nanoparticles in polymeric matrix. The chemical bounds between magnetic nanoparticles and polymeric matrix demonstrated using the FTIR spectrophotometer. The DMTA and contact angle results indicated an increase in the glass transition temperature and hydrophilic properties of nanocomposites is achieved by increasing the magnetic nanoparticles amount in polymer matrix. The cellular results were showed that adhesion of cancer cells compared to normal cells was significantly enhanced by the induction of a magnetic field. These nanocomposite films can be used as a substrate for cellular adhesion and separation processes.

Aim: The aim of this study was to design multi-walled carbon nanotubes (MWCNTs) loaded with paclitaxel (PTX) anti-cancer drug and investigate its anti-cancerous efficacy of human gastric cancer., Background: Carbon nanotubes (CNTs) represent a novel nano-materials applied in various fields such as drug delivery due to their unique chemical properties and high drug loading., Patients and Methods: In this study, multi-walled carbon nanotubes (MWCNTs) pre-functionalized covalently with a paclitaxel (PTX) as an anti-cancer drug and evaluated by different analyses including, scanning electron microscope (SEM), particle size analyzer and cellular analyses., Results: A well conjugated of anti-cancer drug on the carbon nanotube surfaces was shown. This study demonstrates that the MWCN-PTX complex is a potentially useful system for delivery of anti-cancer drugs. The flow cytometry, CFU and MTT assay results have disclosed that MWCNT/PTXs might promote apoptosis in MKN-45 gastric adenocarcinoma cell line., Conclusion: According to results, our simple method can be designed a candidate material for chemotherapy. It has presented a few bio-related applications including, their successful use as a nano-carriers for drug transport.

Injectable hydrogel is one of the great interests for tissue engineering and cell encapsulation. In the study, the thermosensitive chitosan/gelatin/β-glycerol phosphate (C/G/GP) disodium salt hydrogels were designed and investigated by different analyses. The eye fat-derived stem cells were used to evaluate the biocompatibility of hydrogels based on their phenotypic profile, viability, proliferation, and attachment ability. The results show that the sol/gel transition temperature of the C/G/GP hydrogel was in the range of 31.1-33.8 °C at neutral pH value, the gelation time was shortened, and the gel strength also improved at body temperature when compared with the C/GP hydrogel. In vitro cell culture experiments with eyelid fat-derived stem cells in hydrogel showed beneficial effects on the cell phenotypic morphology, proliferation, and differentiation. Microscopic figures showed that the eyelid fat stem cell were firmly anchored to the substrates and were able to retain a normal stem cell phenotype. Immunocytochemistry (ICC) and real-time-PCR results revealed change in the expression profile of eyelid fat stem cells grown with hydrogels when compared to those grown on control in epithelial induction condition. This study indicates that using chitosan/gelatin/β-glycerol phosphate hydrogel for cell culture is feasible and may apply in minimal invasive surgery in the future.

Purpose: The aim of this study was to develop nanofibrous polycaprolactone (PCL) substrate for limbal stem cell (LSC) expansion that can serve as a potential alternative substrate to replace human amniotic membrane (AM)., Materials and Methods: The human limbus stem cell was used to evaluate the biocompatibility of substrates (nanofibrous scaffold and, human AM) based on their phenotypic profile, viability, proliferation and attachment ability., Results: Biocompatibility results indicated that the all substrates were highly biocompatible, as LSCs could favorably attach and proliferate on the nanofibrous surface. Microscopic figures showed that the human LSCs were firmly anchored to the substrates and were able to retain a normal corneal stem cell phenotype. Microscopic analyses illustrated that cells infiltrated the nanofibers and successfully formed a three-dimensional corneal epithelium, which was viable for two weeks. Immunocytochemistry (ICC) and real time-PCR results revealed no change in the expression profile of LECs grown on nanofibrous substrate when compared to those grown on human AM., Conclusion: In addition, electrospun nanofibrous PCL substrate provides not only a milieu supporting LSCs expansion, but also serve as a useful alternative carrier for ocular surface tissue engineering and could be used as an alternative substrate to AM.

In this study, the human limbus stem cell was used to evaluate the phenotypic profile, viability, proliferation, and attachment ability of nanofibrous poly (3-hydroxybutyrate-co-3-hydroxyvalerate) substrates. Results indicated that the all substrates were highly biocompatible, as firmly anchored to the substrates, and were able to retain a normal corneal stem cell phenotype. Immunocytochemistry results revealed no change in the expression profile of cells grown on nanofibrous substrate when compared with those grown on amniotic membrane. In addition, nanofibrous substrate provides not only a milieu supporting cells expansion, but also serve as a useful alternative carrier for ocular surface engineering.

The combination of scaffolds and cells can be useful in tissue reconstruction. In this study, nanofibrous poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/nanohydroxyapatite (nano-HAp) scaffolds, filled with unrestricted somatic stem cells (USSCs), were used for healing calvarial bone in rat model. The healing effects of these scaffolds, with and without stem cells, in bone regeneration were investigated by computed tomography (CT) analysis and pathology assays after 28 days of grafting. The results of CT analysis showed that bone regeneration on the scaffolds, and the amounts of regenerated new bone for polymer/nano-HAp scaffold with USSC, was significantly greater than the scaffold without cell and untreated control samples. Therefore, the combination of scaffold especially with USSC could be considered as a useful method for bone regeneration.

Calcium phosphates are one of the biomaterials that are used for bone regeneration. In this study, Hydroxyapatite (HAp) nanoparticles with chitosan gel filled with unrestricted somatic stem cells (USSCs) were used for healing calvarial bone in rat model. The healing effects of these injectable scaffolds with and without stem cells for bone regeneration were investigated by computed tomography (CT) analysis and pathology assays after 28 days of grafting. The results of CT analysis showing bone regeneration on the scaffolds, also the amounts of regenerated new bone for USSC scaffold was significantly greater than the scaffold without cell and untreated controls. Therefore, the combination of scaffold especially with USSC is considered as a useful method for bone regeneration.

The aim of this study was to develop nanofibrous silk substrates for limbal stem cell expansion that can serve as a potential alternative substrate to replace human amniotic membrane. The human limbal stem cell was used to evaluate the biocompatibility of substrates (random and oriented nanofibrous mats, and human amniotic membrane) based on their phenotypic profile, viability, proliferation, and attachment ability. Biocompatibility results indicated that all substrates were highly biocompatible, as limbal stem cells could favorably attach and proliferate on the nanofibrous surfaces. Microscopic figures showed that the human limbal stem cells were firmly anchored to the substrates and were able to retain a normal corneal stem cell phenotype. Microscopic analyses illustrated that cells infiltrated the nanofibers and successfully formed a three-dimensional corneal epithelium, which was viable for 15 days. Immunocytochemistry and real-time PCR results revealed no change in the expression profile of limbal stem cells grown on nanofibrous substrates when compared to those grown on human amniotic membrane. In addition, electrospun nanofibrous silk substrates especially oriented mat provides not only a milieu supporting limbal stem cells expansion, but also serve as a useful alternative carrier for ocular surface tissue engineering and could be used as an alternative substrate to amniotic membrane.

The aim of this study was to produce a chitosan-crosslinked nanofibrous biodegradable poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nerve conduit. The artificial scaffold was designed by electrospinning method, and cross-linked with chitosan by chemical method. The scaffolds were evaluated by microscopic, physical, and mechanical analyses, and cell culture assays with Schwann cells. Results of analyses showed a good resilience and compliance with movement as a neural graft. Cellular experiments showed a better cell adhesion and growth inside the crosslinked nanofibrous scaffolds compared with un-crosslinked ones. This neural conduit appears to have the right organization for testing in vivo nerve tissue engineering studies.

Unrestricted somatic stem cells (USSCs) loaded in nanofibrous PHBV scaffold can be used for skin regeneration when grafted into full-thickness skin defects of rats. Nanofibrous PHBV scaffolds were designed using electrospinning method and then, modified with the immobilized collagen via the plasma method. Afterward, the scaffolds were evaluated using scanning electron microscopy, physical and mechanical assays. In this study; nanofibrous PHBV scaffolds loaded with and without USSCs were grafted into the skin defects. The wounds were subsequently investigated at 21 days after grafting. Results of mechanical and physical analyses showed good resilience and compliance to movement as a skin graft. In animal models; all study groups excluding the control group exhibited the most pronounced effect on wound closure, with the statistically significant improvement in wound healing being seen on post-operative Day 21. Histological and immunostaining examinations of healed wounds from all groups, especially the groups treated with stem cells, showed a thin epidermis plus recovered skin appendages in the dermal layer. Thus, the graft of collagen-coated nanofibrous PHBV scaffold loaded with USSC showed better results during the healing process of skin defects in rat model.

An oriented poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nerve conduit has been used to evaluate its efficiency based on the promotion of peripheral nerve regeneration in rats. The oriented porous micropatterned artificial nerve conduit was designed onto the micropatterned silicon wafers, and then their surfaces were modified with oxygen plasma to increase cell adhesion. The designed conduits were investigated by cell culture analyses with Schwann cells (SCs). The conduits were implanted into a 30 mm gap in sciatic nerves of rats. Four months after surgery, the regenerated nerves were monitored and evaluated by macroscopic assessments and histology and behavioral analyses. Results of cellular analyses showed suitable properties of designed conduit for nerve regeneration. The results demonstrated that in the polymeric graft with SCs, the rat sciatic nerve trunk had been reconstructed with restoration of nerve continuity and formatted nerve fibers with myelination. Histological results demonstrated the presence of Schwann and glial cells in regenerated nerves. Functional recovery such as walking, swimming, and recovery of nociceptive function was illustrated for all the grafts especially conduits with SCs. This study proves the feasibility of the artificial nerve graft filled with SCs for peripheral nerve regeneration by bridging a longer defect in an animal model.

Introduction: Potential use of umbilical cord (UC) is one of the most exciting frontiers in medicine for repairing damaged tissues. UC and cord blood-derived stem cells are the world's largest potential sources of stem cells. UC contains a mixture of stem and progenitor cells at different lineage commitment stages and UC has been verified as a candidate for cell-based therapies and tissue engineering applications due to the capability of these cells for extensive self-renewal and multi-lineage character in differentiation potential., Areas Covered: UC-based repair or regeneration of organs (i.e., heart, nerve, skin, etc.) is a high-priority research worldwide., Expert Opinion: The aim of this review is to summarize the knowledge about UC with main focus on its applications for tissue repair and regeneration.

In this study, we have demonstrated the ability of cord blood (CB)-derived unrestricted somatic stem cells (USSCs) and chitosan-modified poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffold to promote skin regeneration. Afterward, the scaffolds were evaluated by structural, microscopic, physical, and mechanical assays and cell culture analyses. Results of structural, physical, and mechanical analyses also showed a good resilience and compliance with movement as a skin graft. Cellular experiments showed a better cell adhesion, growth, and proliferation inside the modified scaffolds compared with unmodified ones. In animal models with histological examinations, all groups, excluding the control group especially the groups treated with stem cells, exhibited the most pronounced effect on wound closure, with the statistically significant improvement in wound healing being seen at postoperative day 21. These data suggest that chitosan-modified PHBV scaffold loaded with CB-derived USSCs could significantly contribute to wound repair and be potentially used in the tissue engineering.

Objective: Calcium phosphates are one of biomaterials that are used for bone regeneration. In this study, calcium phosphate nanoparticles such as hydroxyapatite (HA)/fluorapatite (FA),with chitosan gel filled with unrestricted somatic stem cells (USSCs) were used for healing calvarial bone in rat model., Methods: The healing effects of these injectable scaffolds, with and without stem cells, in bone regeneration were investigated by computed tomography (CT) analysis and pathology assays after 28 days of grafting., Results: The results of CT analysis showed that bone regeneration on the scaffolds, and the amounts of regenerated new bone for USSC scaffold were significantly greater than the scaffold without cell and untreated controls., Conclusion: Therefore, the combination of scaffold especially with USSC could be considered as a useful method for bone regeneration.

The aim of this study was to produce a chitosan-cross-linked nanofibrous biodegradable poly (3-hydroxybutyrate-co-3-hydroxyvalerate) nerve conduit. The artificial nerve scaffold designed by electrospinning method and cross-linked with chitosan by chemical method. Afterwards, the scaffolds were evaluated by microscopic, physical, and mechanical analyses and cell culture assays with Schwann cells. The conduits were implanted into a 10 mm gap in the sciatic nerves of the rats. Four months after surgery, the regenerated nerves were evaluated by macroscopic assessments and histology. This polymeric conduit had sufficiently good mechanical properties to serve as a nerve guide. Cellular experiments showed a better cell adhesion, growth, and proliferation inside the cross-linked nanofibrous scaffolds compared with un-cross-linked ones, also Schwann cells well attached on chitosan-cross-linked nanofibrous surface. The in vivo results demonstrated that in the nanofibrous graft, the sciatic nerve trunk had been reconstructed with restoration of nerve continuity and formatted nerve fibers with myelination. This neural conduit appears to have the right organization for testing in vivo nerve tissue engineering studies.

The aim of this study is to develop a nanofibrous polymeric nerve conduit with Schwann cells (SCs) and to evaluate its efficiency on the promotion of functional and locomotive activities in rats. The conduits were implanted into a 30-mm gap in the sciatic nerves of the rats. Four months after surgery, the rats were monitored and evaluated by behavioral analyses such as toe out angle, toe spreading analysis, walking track analysis, extensor postural thrust, open-field analysis, swimming test and nociceptive function, four months post surgery. Four months post-operatively, the results from behavioral analyses demonstrated that in the grafted groups especially in the grafted group with SCs, the rat sciatic nerve trunk had been reconstructed with functional recovery such as walking, swimming and recovery of nociceptive function. This study proves the feasibility of artificial conduit with SCs for nerve regeneration by bridging a longer defect in the rat model.

Our previous studies have histomorphologically confirmed that nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) conduit can be used to repair 30-mm-long sciatic nerve defects. However, the repair effects on rat behaviors remain poorly understood. In this study, we used nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) conduit and autologous sciatic nerve to bridge 30-mm-long rat sciatic nerve gaps. Within 4 months after surgery, rat sciatic nerve functional recovery was evaluated per month by behavioral analyses, including toe out angle, toe spread analysis, walking track analysis, extensor postural thrust, swimming test, open-field analysis and nociceptive function. Results showed that rat sciatic nerve functional recovery was similar after nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) conduit and autologous nerve grafting. These findings suggest that nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) conduit is suitable in use for repair of long-segment sciatic nerve defects.

In this study, we have evaluated the wound-healing effects of unrestricted somatic stem cells loaded in chitosan-cross linked PHBV nanofibrous scaffold, implanted into the full thickness skin defects of rats. Afterwards, the scaffolds were evaluated by structural, microscopic, physical and mechanical assays and cell culture analyses. Defects were treated with the scaffolds without and with USSCs. MTT assay, immunostaining, and wound pathology were performed for groups twenty one days after implantation. SEM images showed the average diameter of about 100 nm for the nanofibrous scaffolds, increasing up to 500 nm after chitosan-crosslinking. Results of physical and mechanical analyses also showed a good resilience and compliance with movement as a skin graft. Cellular experiments showed a better cell adhesion, growth and proliferation inside the cross-linked nanofibrous scaffolds compared to un-cross linked ones. In animal models, all groups, excluding the control group, exhibited the most pronounced effect on wound closure, with the statistically significant improvement in wound healing being seen at post-operative day 21. Histological and immunostaining examinations of healed wounds from all groups, especially the groups treated with stem cells. Thus, the grafting of chitosan-cross-linked nanofibrous scaffold loaded with USSC showed better results during the healing process of skin defects in rat models.

It has been confirmed that nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nerve conduit can promote peripheral nerve regeneration in rats. However, its efficiency in repair of over 30-mm-long sciatic nerve defects needs to be assessed. In this study, we used a nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nerve conduit to bridge a 30-mm-long gap in the rat sciatic nerve. At 4 months after nerve conduit implantation, regenerated nerves were cally observed and histologically assessed. In the nanofibrous graft, the rat sciatic nerve trunk had been reconstructed by restoration of nerve continuity and formation of myelinated nerve fiber. There were Schwann cells and glial cells in the regenerated nerves. Masson's trichrome staining showed that there were no pathological changes in the size and structure of gastrocnemius muscle cells on the operated side of rats. These findings suggest that nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nerve conduit is suitable for repair of long-segment sciatic nerve defects.

Background: Various regions in Iran, especially the Khuzestan Province, have been covered by dust and dirt during the past two years due to environmental changes in the Middle East. We sought to evaluate the effect of these pollutants on the coagulant factors of people residing in Abadan and Khoramshahr, two major cities of Khuzestan Province., Methods: One hundred twenty-nine healthy individuals were enrolled into this study, and their prothrombin time as well as fibrinogen, platelet, and Factor VIII levels were measured before and after climate changes., Results: After climate changes, the mean prothrombin time decreased, while the fibrinogen, platelet, and Factor VIII levels rose., Conclusion: The results of this study suggest that the pollutants deployed in the Middle East can affect prothrombin time as well as fibrinogen, platelet, and Factor VII levels considerably and increase coagulant state. The pollutants can, consequently, increase the risk of cardiovascular diseases. It seems that cooperation at government levels between Iran and its neighboring countries is required to reverse desertification and avoid inaccurate usage of subterranean water resources so as to lessen air pollution.

A nanofibrous PHBV nerve conduit has been used to evaluate its efficiency based on the promotion of nerve regeneration in rats. The designed conduits were investigated by physical, mechanical and microscopic analyses. The conduits were implanted into a 30-mm gap in the sciatic nerves of the rats. Four months after surgery, the regenerated nerves were evaluated by macroscopic assessments and histology. This polymeric conduit had sufficiently high mechanical properties to serve as a nerve guide. The results demonstrated that in the nanofibrous graft with cells, the sciatic nerve trunk had been reconstructed with restoration of nerve continuity and formatted nerve fibers with myelination. For the grafts especially the nanofibrous conduits with cells, muscle cells of gastrocnemius on the operated side were uniform in their size and structures. This study proves the feasibility of artificial conduit with Schwann cells for nerve regeneration by bridging a longer defect in a rat model.

The composition of the dressings is based on polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), and agar. The electron beam irradiation technique has been used to prepare hydrogel wound dressings. The in vitro biocompatibility of the hydrogel was investigated by check samples (hydrocolloid Comfeel), antibacterial test (Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia Coli k12), anti fungal test (Candida Albicans) and cytotoxicity test (Fibroblast L929). Results have shown cell attachment characteristics and nontoxicity of all samples. Antibacterial testing also showed that the antibacterial effect of the hydrogel sample to the check sample increased to 30%. Also, investigation of antifungal analysis did not show any trace of fungi growth on the surface of the hydrogel, whereas antifungal effect did not observe on the surface of the check sample. Finally, this hydrogel sample showed a good in vitro biocompatibility.