Search

This study investigates the behavior of two different mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders, polyvinylpyrrolidone:polyvinylidene difluoride (PVP:PVDF) and polyvinylpyrrolidone:polyacrylic acid (PVP:PAA), at graphene and graphite interfaces using classical molecular dynamics simulations. The aim is to identify the best performing monomer binder blend and carbon-based material for the design of battery-optimized energy devices. The PVP:PAA monomer binder blend and graphite are found to have the best interaction energies, densification upon adsorption, and more ordered structure. The adsorption of both monomer binder blends is strongly guided by the higher affinity of PVP and PAA monomeric molecules for the surfaces compared to PVDF. The structure of adsorbed layers of PVP:PVDF monomer binder blend on graphene and graphite develops more quickly than PVP:PAA, indicating faster kinetics. This study complements a previous density functional theory study recently reported by our group and contributes to a better understanding of the nanoscopic features of relevant interfacial regions involving mixtures of monomers of PVP-based battery binders and different carbon-based materials. The effect of a blend of commonly used monomer binders on carbon-based materials is essential for obtaining tightly bound anode and cathode active materials in lithium-ion batteries, which is crucial for designing battery-optimized energy devices., (© 2023 Author(s). Published under an exclusive license by AIP Publishing.)

The effect of water on the properties of an archetypical type III deep eutectic solvent [choline chloride : ethyleneglycol (1:2)] is analyzed using ab initio molecular dynamics simulations in the 0 to 60 wt. % water content range. The properties of the mixed fluids are studied considering nanostructuring, intermolecular forces (hydrogen bonding), the energy of interactions, dynamic properties, and domain analysis. The reported results confirm that the change in the properties of the studied deep eutectic solvent is largely dependent on the amount of water. The competing effect of water molecules for the available hydrogen bonding sites determines the evolution of the properties upon water sorption. The main structural features of the considered deep eutectic were maintained even for large water contents; thus, its hydrophilicity could be used for tuning fluid physicochemical properties.

Type V natural deep eutectic solvents considering menthol, thymol, and levulinic acids are studied considering a combined experimental and theoretical approach to develop a multiscale characterization of these fluids with particular attention to intermolecular forces (hydrogen bonding) and their relationships with macroscopic behavior. Density, viscosity, refraction index, and thermal conductivity were measured as a function of temperature, providing a thermophysical characterization of the fluids. Quantum chemistry was applied to characterize hydrogen bonding in minimal molecular clusters, allowing us to quantify interaction strength, topology (according to atoms in a molecule theory), and electronic properties. Classical molecular dynamics simulations were also performed, allowing us to characterize bulk liquid phases at the nanoscopic level, analyzing the fluid's structuring, void distribution, and dynamics. The reported results allowed us to infer nano-macro relationships, which are required for the proper design of these green solvents and their application for different technologies.

Terpene-based natural deep eutectic solvents (NADES) formed by using carvone as the hydrogen bond acceptor and a series of organic acids including tartaric, succinic, malic, and lactic acids as hydrogen bond donors are studied using a combination of molecular simulation methods. Density functional theory was used to study small molecular clusters and the topological characterization of the intermolecular forces using the atoms-in-a-molecule approach. Close-range interactions between the optimized carvone bases eutectic solvents between carbon dioxide have been studied for potential utilization of these solvents for gas capture purposes. Furthermore, COSMO-RS calculations have been carried out for the carbon dioxide solubilization performance of NADES compounds and to obtain s-profiles to infer the polarity and H-bond forming ability of the studied solvents. On the other hand, molecular dynamics simulations were carried out to analyze the bulk liquid properties and their relationship with relevant macroscopic properties (e.g., density or thermal expansion). Last but not least, relevant toxicity properties of the studied systems were predicted and reported in this work. The reported results provide the characterization of environmentally friendly NADES and show the suitability of carvone for advanced applications as carbon dioxide solubilizers.

Deep eutectic solvents based on cineole as hydrogen bond acceptors and organic acids (succinic, malic, and lactic) as hydrogen bond donors are studied using a theoretical approach. The nature, strength, and extension of hydrogen bonding are analyzed, thus quantifying this prevailing interaction and its role in the fluid properties. Density functional theory was used to study small molecular clusters, and the topological characterization of the intermolecular forces was carried out using atoms in a molecule theory. Classical molecular dynamics simulations were considered to study nanoscopic bulk liquid properties and their relationship with relevant macroscopic properties such as density or thermal expansion. The reported results provide the characterization of environmentally friendly deep eutectic solvents and show the suitability of cineole for developing these sustainable materials.

We report a simple, efficient, one-step, affordable method to produce open-channel paper-based microfluidic channels. One surface of a sheet of paper is selectively calendared, with concomitant hydrophobization, to create the microfluidic channel. Our method involves asymmetric mechanical modification of a paper surface using a rolling ball (ball-point pen) under a controlled amount of applied stress (σ z ) to ascertain that only one side is modified. A lubricating solvent (hexane) aids in the selective deformation. The lubricant also serves as a carrier for a perfluoroalkyl trichlorosilane allowing the channel to be made hydrophobic as it is formed. For brevity and clarity, we abbreviated this method as TACH (Targeted Asymmetric Calendaring and Hydrophobization). We demonstrate that TACH can be used to reliably produce channels of variable widths (size of the ball) and depths (number of passes), without affecting the nonworking surface of the paper. Using tomography, we demonstrate that these channels can vary from 10s to 100s of microns in diameter. The created hydrophobic barrier extends around the channel through wicking to ensure no leakages. We demonstrate, through modeling and fabrication, that flow properties of the resulting channels are analogous to conventional devices and are tunable based on associated dimensionless numbers.

Room temperature ionic liquids have been proposed as replacement solvents in a wide range of industrial separation processes. Here, we focus on the use of ionic liquids as solvents for the pharmaceutical compound lidocaine. We show that the solubility of lidocaine in seven common 1-n-butyl-3-methylimidazolium based ionic liquids is greatly enhanced relative to water. The predicted solubility is greatest in [BMIM](+)[CH3CO2](-), which we find results from favorable hydrogen bonding between the lidocaine amine hydrogen and the [CH3CO2](-) oxygen, favorable electrostatic interactions between the lidocaine amide oxygen with the [BMIM](+) aromatic ring hydrogens, while lidocaine does not interfere with the association of [BMIM](+) with [CH3CO2](-). Additionally, by removing functional groups from the lidocaine scaffold while maintaining the important amide group, we found that as the van der Waals volume increases, solubility in [BMIM](+)[CH3CO2](-) relative to water increases.

Driving microfluidic flow in micropixels by electrowetting to realize light switches and displays is of both practical and fundamental significance. The electro-optical performance related to microfluidic behavior needs to be clarified to optimize device functions. In this article, the microfluidic performance in electrowetting display devices was categorized according to the oil-water interface shape and response. The oil film movement was divided into vertically "thinning" and transversally "opening," for which the "thinning" process was found the key factor determining the pixel switching speed rather than the "opening" process. Therefore, the breakup point and the oil film thickness were critical, which could be controlled by surface wettability and oil volume. We have also realized a new oil filling method with controllable dosing volume assisted by the microfluidic creation of microdroplets. This study could help quantitatively understand electrowetting display performance in both its theoretical and practical aspects.

We present a general framework to predict the excess solubility of small molecular solids (such as pharmaceutical solids) in binary solvents via molecular simulation free energy calculations at infinite dilution with conventional molecular models. The present study used molecular dynamics with the General AMBER Force Field to predict the excess solubility of acetanilide, acetaminophen, phenacetin, benzocaine, and caffeine in binary water/ethanol solvents. The simulations are able to predict the existence of solubility enhancement and the results are in good agreement with available experimental data. The accuracy of the predictions in addition to the generality of the method suggests that molecular simulations may be a valuable design tool for solvent selection in drug development processes.

In this paper, we review the recent progress in the development of low-cost microfluidic devices based on multifilament threads and textiles for semi-quantitative diagnostic and environmental assays. Hydrophilic multifilament threads are capable of transporting aqueous and non-aqueous fluids via capillary action and possess desirable properties for building fluid transport pathways in microfluidic devices. Thread can be sewn onto various support materials to form fluid transport channels without the need for the patterned hydrophobic barriers essential for paper-based microfluidic devices. Thread can also be used to manufacture fabrics which can be patterned to achieve suitable hydrophilic-hydrophobic contrast, creating hydrophilic channels which allow the control of fluids flow. Furthermore, well established textile patterning methods and combination of hydrophilic and hydrophobic threads can be applied to fabricate low-cost microfluidic devices that meet the low-cost and low-volume requirements. In this paper, we review the current limitations and shortcomings of multifilament thread and textile-based microfluidics, and the research efforts to date on the development of fluid flow control concepts and fabrication methods. We also present a summary of different methods for modelling the fluid capillary flow in microfluidic thread and textile-based systems. Finally, we summarized the published works of thread surface treatment methods and the potential of combining multifilament thread with other materials to construct devices with greater functionality. We believe these will be important research focuses of thread- and textile-based microfluidics in future.

"Paper-based microfluidics" or "lab on paper," as a burgeoning research field with its beginning in 2007, provides a novel system for fluid handling and fluid analysis for a variety of applications including health diagnostics, environmental monitoring as well as food quality testing. The reasons why paper becomes an attractive substrate for making microfluidic systems include: (1) it is a ubiquitous and extremely cheap cellulosic material; (2) it is compatible with many chemical/biochemical/medical applications; and (3) it transports liquids using capillary forces without the assistance of external forces. By building microfluidic channels on paper, liquid flow is confined within the channels, and therefore, liquid flow can be guided in a controlled manner. A variety of 2D and even 3D microfluidic channels have been created on paper, which are able to transport liquids in the predesigned pathways on paper. At the current stage of its development, paper-based microfluidic system is claimed to be low-cost, easy-to-use, disposable, and equipment-free, and therefore, is a rising technology particularly relevant to improving the healthcare and disease screening in the developing world, especially for those areas with no- or low-infrastructure and limited trained medical and health professionals. The research in paper-based microfluidics is experiencing a period of explosion; most published works have focused on: (1) inventing low-cost and simple fabrication techniques for paper-based microfluidic devices; and (2) exploring new applications of paper-based microfluidics by incorporating efficient detection methods. This paper aims to review both the fabrication techniques and applications of paper-based microfluidics reported to date. This paper also attempts to convey to the readers, from the authors' point of view the current limitations of paper-based microfluidics which require further research, and a few perspective directions this new analytical system may take in its development.

The emerging concept of thread-based microfluidics has shown great promise for application to inexpensive disease detection and environmental monitoring. To allow the creation of more sophisticated and functional thread-based sensor designs, the ability to better control and understand the flow of fluids in the devices is required. To meet this end, various mechanisms for controlling the flow of reagents and samples in thread-based microfluidic devices are investigated in this study. A study of fluid penetration in single threads and in twined threads provides greater practical understanding of fluid velocity and ultimate penetration for the design of devices. "Switches" which control when or where flow can occur, or allow the mixing of multiple fluids, have been successfully prototyped from multifilament threads, plastic films, and household adhesive. This advancement allows the fabrication of more functional sensory devices which can incorporate more complex detection chemistries, while maintaining low production cost and simplicity of construction.

Direct simulations of flexible cylindrical fiber suspensions in a finite Reynolds number flow are reported. The simulation method is based on a lattice Boltzmann equation and a flexible fiber model. A slender solid body is discretized into a chain of cylindrical segments contacting each other at the their ends through ball and socket joints that allow adjacent segments to rotate around the joints in three dimensional space. A constraint force is imposed at each joint. In general, motion and rotational matrices of each segment are functions of constraint forces. It is necessary to linearize the rotational matrices in forces and torques so that constraint forces could be solved using joint contacting conditions. Therefore, quaternion parameters as well as rotational matrix could be expanded in a power series of the length of time step up to a second order. A half leapfrog algorithm D. Fincham, [CCP5 Quarterly, 2, 6 (1981)] is modified to ensure the ball and socket joint conditions to be satisfied at each time step. The validation of the present flexible fiber method is tested by using a rigid particle method. It is shown that the computational results are consistent with the existing experimental and theoretical results at finite Reynolds number flows. With the present method, nonlinear inertial interactions between fluid and flexible filaments can be naturally studied. A few applications are included.