Search

Per- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g -1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10 -4 % of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide.

Globally, per- and polyfluoroalkyl substances (PFAS)-related research on paper products has focused on food packaging with less consideration on the presence of PFAS at different stages of the paper recycling chain. This study analysed the prevalence of PFAS in paper grades used for the manufacture of recycled paperboard. The presence of PFAS was attributed to the use of PFAS-containing additives, consumer usage, exposure to packed goods as well as contamination during mingling, sorting, collection, and recovery of paper recycling material. Q Orbitrap mass spectrometry was used to analyse the paper samples after accelerated solvent extraction and solid phase extraction. The distribution and possible propagation of 22 PFAS were determined in pre-consumer, retail and post-consumer paper products. Post-consumer samples had the highest combined average concentration (ΣPFAS) at 213 ng/g, while the ΣPFAS in retail (159 ng/g) and pre-consumer samples (121 ng/g) was detected at lower concentrations. This study showed that waste collection and recycling protocols may influence PFAS propagation and that measures must be developed to minimise and possibly eliminate exposure opportunities., (© 2024. The Author(s).)

The rapid discrimination of bacteria is currently an emerging trend in the fields of food safety, medical detection, and environmental observation. Traditional methods often require lengthy culturing processes, specialized analytical equipment, and bacterial recognition receptors. In response to this need, we have developed a paper-based fluorescence sensor array platform for identifying different bacteria. The sensor array is based on three unique carbon quantum dots (CQDs) as sensing units, each modified with a different antibiotic (polymyxin B, ampicillin, and gentamicin). These antibiotic-modified CQDs can aggregate on the bacterial surface, triggering aggregation-induced fluorescence quenching. The sensor array exhibits varying fluorescent responses to different bacterial species. To achieve low-cost and portable detection, CQDs were formulated into fluorescent ink and used with an inkjet printer to manufacture paper-based sensor arrays. A smartphone was used to collect the responses generated by the bacteria and platform. Diverse machine learning algorithms were utilized to discriminate bacterial types. Our findings showcase the platform's remarkable capability to differentiate among five bacterial strains, within a detection range spanning from 1.0 × 10 3  CFU/mL to 1.0 × 10 7  CFU/mL. Its practicality is further validated through the accurate identification of blind bacterial samples. With its cost-effectiveness, ease of fabrication, and high degree of integration, this platform holds significant promise for on-site detection of diverse bacteria., (© 2024. The Author(s).)

Safe, accurate, and reliable analysis of urinary biomarkers is clinically important for early detection and monitoring of the progression of chronic kidney disease (CKD), as it has become one of the world's most prevalent non-communicable diseases. However, current technologies for measuring urinary biomarkers are either time-consuming and limited to well-equipped hospitals or lack the necessary sensitivity for quantitative analysis and post a health risk to frontline practitioners. Here we report a robust paper-based dual functional biosensor, which is integrated with the clinical urine sampling vial, for the simultaneous and quantitative analysis of pH and glucose in urine. The pH sensor was fabricated by electrochemically depositing IrOx onto a paper substrate using optimised parameters, which enabled an ultrahigh sensitivity of 71.58 mV pH -1 . Glucose oxidase (GOx) was used in combination with an electrochemically deposited Prussian blue layer for the detection of glucose, and its performance was enhanced by gold nanoparticles (AuNPs), chitosan, and graphite composites, achieving a sensitivity of 1.5 μA mM -1 . This dual function biosensor was validated using clinical urine samples, where a correlation coefficient of 0.96 for pH and 0.98 for glucose detection was achieved with commercial methods as references. More importantly, the urine sampling vial was kept sealed throughout the sample-to-result process, which minimised the health risk to frontline practitioners and simplified the diagnostic procedures. This diagnostic platform, therefore, holds high promise as a rapid, accurate, safe, and user-friendly point-of-care (POC) technology for the analysis of urinary biomarkers in frontline clinical settings.

The patterning of hydrophilic paper with hydrophobic materials has emerged as an interesting method for the fabrication of paper-based devices (PADs). Herein, we demonstrate a digitally automated, easy, low-cost, eco-friendly, and readily available method to create highly hydrophobic barriers on paper that can be promptly employed with PADs by simply using a bioink made with rosin, a commercially available natural resin obtained from conifer trees. The bioink can be easily delivered with the use of a ballpoint pen to produce water- and organic solvent-resistant barriers, showing superior properties when compared to other methods such as wax-printing or permanent markers. The approach enables the pen to be attached to a commercially available cutting printer to perform the semiautomated fabrication of hydrophobic barriers for PADs. With the aid of digitally controlled optimization, together with features of machine learning and design of experiments, we show a thorough investigation on the barrier strength that can be further adjusted to the desired application's needs. Then, we explored the barrier sturdiness across various uses, such as wide range aqueous pH sensing and the harsh acidic/organic conditions needed for the colorimetric detection of cholecalciferol.

We proposed a triple functional SERS substrate by immobilized Ag nanoparticles on the surface of filter paper. The high dense Ag nanoparticles were distributed on the SERS substrate via in-situ growth process. By optimizing the parameter in preparation process, the optimal filter paper SERS substrate was fabricated by using 30 mM of AgNO 3 with 20 S growth time. Due to capillary-effect wicking of cellulose fiber, the paper SERS substrate provide simple, fast and pump-free function for transferring analyte onto sharp tip through development of fluid. The fluid flow also brings target concentrate effect within the tip area. Furthermore, the separation feasibility was obtained during the development process of fluid. The preconcentrated effects not only enhanced the SERS signal of analyte, but also improve the fluorescence visible effect. The filter paper SERS substrate was successfully used for separating, concentrating and detecting Sudan dye from chili product, the detection limit could achieve 10 -6 M. This study developed a portable, cost-effective and eco-friendly SERS substrate for separating and detecting trace chemical in food., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This article examines the impact of the reporting practice and paper technologies like forms on reports that were later used for national morbidity statistics by studying the Swiss reporting system for infectious diseases between 1886 and 1921. Analysing the production processes of notifications shows the difficulties and solutions in the implementation of the statutory reporting process. Two disease outbreaks-a smallpox outbreak in Schaffhausen and a typhoid outbreak in the canton of Lucerne-serve as case studies. It is shown that reports are not only objective representations of diseases, but also symbolize the medico-social interactions that produce them, timed by administrative tools like reporting forms and the act of reporting. This destabilises historical statistics and illustrates the complexity of the historical source material, as these interactions and their impact on reporting must be considered. These findings are further supported by examining the Swiss reporting system during the Spanish flu of 1918 and its failure to record influenza cases., (© 2024. The Author(s).)

The occurrence of chlorinated derivatives of bisphenol S (Cl x -BPS) and BPS was investigated in nine types of paper products ( n = 125), including thermal paper, corrugated boxes, mail envelopes, newspapers, flyers, magazines, food contact paper, household paper, and business cards. BPS was found in all paper product samples, while Cl x -BPS were mainly found in thermal paper (from below the limit of detection (-1 ), corrugated box (-1 ), mailing envelope (-1 ), and newspaper (-1 ) samples. All samples with detectable Cl x -BPS concentrations contained a high concentration of BPS. Cl 1 -BPS was the most frequently detected analyte, followed by Cl 2 -BPS-2 (2-chloro-4-(3-chloro-4-hydroxyphenyl)sulfonylphenol), Cl 2 -BPS-1 (2,6-dichloro-4-(4-hydroxyphenyl)sulfonylphenol), Cl 3 -BPS, and Cl 4 -BPS. The estimated daily intake of Cl x -BPS via dermal transfer upon handling of paper products was 0.546 and 16.4 ng per day for generally and occupationally exposed individuals, at the maximum concentration of 3.76 μg g -1 . Additionally, the potential toxicity of Cl x -BPS was predicted using an in silico tool, showing toxicity gradually increased with an increasing degree of chlorination of BPS. Thus, human exposure to Cl x -BPS through paper products should be given due attention as a health risk.

In this study, the potential of ultrafiltered xylano-pectinolytic enzymatic bleaching approach was investigated, for manufacturing wheat straw-based paper. The enzymatic step was found to be most effective, with xylanase-pectinase dose of 4-1.7 IU/g pulp and time period of 180 min. The absorption spectra of the pulp free filtrate samples obtained after treatment of the pulp with ultrafiltered enzymes showed the removal of more impurities, in comparison to the treatment with crude enzymes. Microscopic analysis also showed the removal of lignin impurities in enzymatically bleached pulp samples. This bleaching approach using enzymes resulted in 27% reduction in ClO 2 dose. Ultrafiltered enzymes treated pulp samples also showed improved quality-related parameters, and Gurley porosity, burst index, breaking length, double fold, tear index, and viscosity increased by 19.05, 13.70, 8.18, 29.27, 4.41, and 13.27%, respectively. The lignin content, TDS, TSS, BOD and COD values also decreased in the effluent samples obtained after enzymatic bleaching plus 73% chemical bleaching dose. The BOD and COD values of the effluent samples improved by 23.01 and 23.66%, respectively. Thus, indicating the potential of ultrafiltered xylano-pectinolytic enzymes in reducing pollution during bleaching of wheat straw. This is the first study, mentioning the efficacy of ultrafiltered enzymes in the bleaching of wheat straw-based paper with better optical-strength-related properties and effluent characteristics., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Health care providers worldwide are rapidly adopting electronic medical record (EMR) systems, replacing paper record-keeping systems. Despite numerous benefits to EMRs, the environmental emissions associated with medical record-keeping are unknown. Given the need for urgent climate action, understanding the carbon footprint of EMRs will assist in decarbonizing their adoption and use., Objective: We aimed to estimate and compare the environmental emissions associated with paper medical record-keeping and its replacement EMR system at a high-volume eye care facility in southern India., Methods: We conducted the life cycle assessment methodology per the ISO (International Organization for Standardization) 14040 standard, with primary data supplied by the eye care facility. Data on the paper record-keeping system include the production, use, and disposal of paper and writing utensils in 2016. The EMR system was adopted at this location in 2018. Data on the EMR system include the allocated production and disposal of capital equipment (such as computers and routers); the production, use, and disposal of consumable goods like paper and writing utensils; and the electricity required to run the EMR system. We excluded built infrastructure and cooling loads (eg. buildings and ventilation) from both systems. We used sensitivity analyses to model the effects of practice variation and data uncertainty and Monte Carlo assessments to statistically compare the 2 systems, with and without renewable electricity sources., Results: This location's EMR system was found to emit substantially more greenhouse gases (GHGs) than their paper medical record system (195,000 kg carbon dioxide equivalents [CO 2 e] per year or 0.361 kg CO 2 e per patient visit compared with 20,800 kg CO 2 e per year or 0.037 kg CO 2 e per patient). However, sensitivity analyses show that the effect of electricity sources is a major factor in determining which record-keeping system emits fewer GHGs. If the study hospital sourced all electricity from renewable sources such as solar or wind power rather than the Indian electric grid, their EMR emissions would drop to 24,900 kg CO 2 e (0.046 kg CO 2 e per patient), a level comparable to the paper record-keeping system. Energy-efficient EMR equipment (such as computers and monitors) is the next largest factor impacting emissions, followed by equipment life spans. Multimedia Appendix 1 includes other emissions impact categories., Conclusions: The climate-changing emissions associated with an EMR system are heavily dependent on the sources of electricity. With a decarbonized electricity source, the EMR system's GHG emissions are on par with paper medical record-keeping, and decarbonized grids would likely have a much broader benefit to society. Though we found that the EMR system produced more emissions than a paper record-keeping system, this study does not account for potential expanded environmental gains from EMRs, including expanding access to care while reducing patient travel and operational efficiencies that can reduce unnecessary or redundant care., (©Cordelia Kwon, Lernik Essayei, Michael Spencer, Tom Etheridge, Rengaraj Venkatesh, Natrajan Vengadesan, Cassandra L Thiel. Originally published in the Journal of Medical Internet Research (https://www.jmir.org), 06.02.2024.)