Search

Point-of-care testing (POCT) is a test method performed on the sampling site or patient bedside. Accurate results can be achieved rapidly by the application of portable analytical instruments and compatible reagents. It has been widely used in the field of in vitro diagnosis (IVD). Paper-based microfluidics technology has great potential in developing POCT due to its advantages in low cost, simple operation, rapid detection, portable equipment, and unrestricted application conditions. In recent years, the development of paper-based microfluidic technology and its integration with various new technologies and methods have promoted the substantial development of POCT technology and methods. The classification and characteristic of the paper are summarized in this review. Paper-based microfluidic sample pretreatment methods, the flow control in the process of reaction and the signal detecting and analyzing methods for the testing results are introduced. The research progress of various kinds of microfluidic paper-based analytical devices (μPADs) toward POCT in recent years is reviewed. Finally, remaining problems and the future prospects in POCT application of paper-based microfluidics are discussed.

Purpose: To compare the effects of three occlusal adjustment methods in different sequences by articulating paper on the delayed occlusal characteristics of single molars., Methods: Thirty-two implants of first molars were divided into group A(n=12), group B (n=12) and group C (n=12) by sequential adjustment according to random number means, and (100+40), (100+50+30) and (100+40+20) μm sequence occlusal papers were used for occlusal adjustment, respectively. TeeTester was used to measure the delay time and force ratio between prosthesis and adjacent teeth at restoration day, 3 and 6 months after restoration, and to record the number of cases readjusting in each group during follow-up. SPSS 25.0 software package was used for data analysis., Results: There were significant differences in delay time between groups at restoration day (P＜0.05), and 3 and 6 months after restoration, delay time of group C was still smaller than that of group A and B (P＜0.05). During follow-up, the time of each group showed a trend of shortening (P＜0.05), but there was still delayed occlusion. Compared with group B and C, the force ratio in group A was lower at each time(P＜0.05). The ratio of each group showed an increasing trend during follow-up (P＜0.05), and group C showed the largest increase (P＜0.001). The number of cases readjusting was relatively small in group A, and the most was in group C(P＜0.05). There was positive correlation between delay time and force difference of prosthesis and adjacent teeth(P＜0.001)., Conclusions: The (100+40) μm sequence group had higher occlusal stability and better clinical applicability. The smaller the occlusal contact space realized by the sequential method, the greater the change might be, which requires close follow-up in clinical practice.

The kidney is the body's most important organ and the protein components in urine could be detected for diagnosing certain diseases. The amount of IgG protein in urine could be used to determine the degree of kidney function damage. IgG protein in human urine was detected by vertical flow paper-based microfluidic chip, double-antibody sandwich immunoreaction, and cell phone image processing. The results showed that using an IgG antibody concentration of 500 μg/mL and a gold standard antibody concentration of 100 μg/mL, the image signal showed a good linear relationship in the range of IgG concentration of 0.2-3.2 μg/mL, with R 2 =0.973 3 achieved. A complete set of detection devices were designed and the detection method showed good non-specificity.

Objective: To analyze the characteristics of scientific papers in the field of global liver diseases published by Chinese scholars that were retracted for diverse reasons from the Retraction Watch database, so as to provide a reference to publishing-related papers. Methods: The Retraction Watch database was retrieved for retracted papers in the field of global liver disease published by Chinese scholars from March 1, 2008 to January 28, 2021. The regional distribution, source journals, reasons for retraction, publication and retraction times, and others were analyzed. Results: A total of 101 retracted papers that were distributed across 21 provinces/cities were retrieved. Zhejiang area ( n = 17) had the most retracted papers, followed by Shanghai ( n = 14), and Beijing ( n = 11). The vast majority were research papers ( n = 95). The journal PLoS One had the highest number of retracted papers. In terms of time distribution, 2019 ( n = 36) had the most retracted papers. 23 papers, accounting for 8.3% of all retractions, were retracted owing to journal or publisher concerns. Liver cancer (34%), liver transplantation (16%), hepatitis (14%), and others were the main areas of retracted papers. Conclusion: Chinese scholars have a large number of retracted articles in the field of global liver diseases. A journal or publisher chooses to retract a manuscript after investigating and discovering more flawed problems, which, however, require further support, revision, and supervision from the editorial and academic circles.

Objective: To explore the influence of the thickness of mixed cardboard on the compressive strength of glass ionomer cement and the associated factors., Methods: Three different types of glass ionomer cements were mixed on the top of 60, 40, 20 and 1 pieces of paper (P60, P40, P20 and P1), respectively. The compressive strength of the materials was tested after solidification, and the bubble rate was calculated with the assistance of scanning electron microscope., Results: (1) Compressive strength: ① ChemFil Superior glass ionomer (CF): The average compressive strength of P1 group was the highest, which was significantly different from that of P40 and P60 groups ( P values were 0.041 and 0.032 respectively); ② To Fuji IX GP glass ionomer (IX): The average compressive strength of P1 group was the highest, which was statistically different from that of P40 and P60 groups ( P values were 0.042 and 0.038 respectively); ③ Glaslonomer FX-Ⅱ glass ionomer cement (FX): The average compressive strength of P1 group was the highest, which was statistically different from that of P20, P40 and P60 groups ( P values were 0.031, 0.040 and 0.041 respectively), but there was no statistical difference among the other groups. All the three materials showed that the compressive strength of glass ions gradually increased with the decrease of the thickness of the blended paperboard, and the two materials had a highly linear negative correlation, the correlation coefficients of which were CF-0.927, IX-0.989, FX-0.892, respectively. (2) Scanning electron microscope: P1 group had the least bubbles among the three materials., Conclusion: It indicates that the thickness of mixed cardboard has a negative correlation with the compressive strength of glass ions. The thicker the mixed cardboard is, the greater the elasticity is. Excessive elasticity will accelerate the mixing speed when the grinding glass ions. Studies have shown that the faster the speed of artificial mixing is, the more bubbles is produced.The thicker ther mixed cardboard is, the more bubblesn are generated by glass ionomer cement, and the higher the compressive strength is. Using one piece of paper board to mix glass ionomer cement has the least bubbles and can obtain higher compressive strength.

In order to improve the comprehensive ability of China sudden cardiac death prevention and rescue, the Expert Committee of China Sudden Cardiac Death Prevention and Rescue System Construction organized 100 experts and scholars in the field of cardiopulmonary resuscitation to form Blue paper of China sudden cardiac death prevention and rescue system construction (2022). It mainly includes three parts: the organizational structure of the sudden cardiac death prevention and rescue system, the main functions of the sudden cardiac death prevention and rescue system, and the key projects of the sudden cardiac death prevention and rescue system. It is hoped that the China sudden cardiac death prevention and rescue system will be established to serve the life and health of the people wholeheartedly.

On May 20, 2022, World Health Organization (WHO) Position Paper on Understanding the Behavioural and Social Drivers of Vaccine Uptake (BeSD) was published. This review introduced the BeSD toolkit, interventions to increase vaccine uptake, and offered WHO's position and recommendation. Based on immunization practice, this position paper had some implications for improving the vaccination coverage in China: (1) To promote the BeSD toolkit localization; (2) To integrate the measurement and monitoring of BeSD into multisectoral routine efforts; (3) To enhance the diversity and professionalization of immunization practitioners; (4) To design and carry out implementation research scientifically.

On May 13, 2022, World Health Organization(WHO) Position Paper on Influenza Vaccine (2022 edition) was published. This position paper updates information on influenza epidemiology, high risk population, the impact of immunization on disease, influenza vaccines and effectiveness and safety, and propose WHO's position and recommendation that all countries should consider implementing seasonal influenza vaccine immunization programmes to prepare for an influenza pandemic. In addition, it proposes that the influenza surveillance platform can be integrated with the surveillance of other respiratory viruses, such as SARS-CoV-2 and Respiratory Syncytial Virus. This position paper has some implications for the prevention and control of influenza and other respiratory infectious diseases in China: (1) Optimize influenza vaccine policies to facilitate the implementation of immunization services; (2) Influenza prevention and control should from the perspective of Population Medicine focus on the individual and community to integrate with "Promotion, Prevention, Diagnosis, Control, Treatment, Rehabilitation"; (3) Incorporate prevention and control of other respiratory infectious diseases such as influenza, COVID-19, respiratory syncytial virus and adenovirus, and intelligently monitor by integrating multi-channel data to achieve the goal of co-prevention and control of multiple diseases.