Search

Balamuthia mandrillaris is a free-living amoeba (FLA) that causes granulomatous amebic encephalitis (GAE) and skin lesions. Transcriptomic analysis is a powerful tool used to study B. mandrillaris pathogenic infections. However, preliminary tests of RNA extraction showed poor results, so it has become essential to standardize a protocol for high-quality RNA. The present study evaluated 11 RNA extraction protocols based on three commercial kits by making modifications to the temperature and centrifugation times, and by combining kits. Four protocols, namely Q3 (based on QIAGEN RNeasy Mini Kit, with modifications in temperature and centrifugation times), T1 (Invitrogen TRIzol Reagent), T2 (combination of TRIzol and QIAGEN modified protocols) and T3 (combination of TRIzol and PROMEGA SV Total RNA Isolation protocols), presented RNA with good integrity and purity, except for the T1 protocol, which obtained an A260/230 value below the acceptable threshold. High RNA integrity (RIN) values were obtained with the Q3 (9.8), T2 (9.2), and T3 (8.9) protocols, while the T1 protocol obtained a lower RIN value (7.1). The Q3, T2, and T3 protocols obtained high-quality RNA from B. mandrillaris based on the criteria of integrity, purity, and concentration, where the implemented modifications and combinations raised the quality; thus, their use is recommended to obtain accurate results when performing transcriptomic analysis.

turboLysis is a novel mechanical cell lysis device that utilizes small beads to efficiently lyse tough cells like Mycobacterium, Saccharomyces, and Arabidopsis. We compared turboLysis to bead beating using the BeadBug 6 for several concentrations of Mycobacterium tuberculosis roughly correlated to the bacterial load commonly seen in patient samples. turboLysis performed similarly to the BeadBug at low bacterial concentrations and outperformed it at high concentrations above 2x105 CFU/ml (p

Abstract Background High-quality RNA extraction from woody plants is difficult because of the presence of polysaccharides and polyphenolics that bind or co-precipitate with the RNA. The CTAB (cetyl trimethylammonium bromide) based method is widely used for the isolation of nucleic acids from polysaccharide-rich plants. Despite the widespread use of the CTAB method, it is necessary to adapt it to particular plant species, tissues and organs. Here we described a simple and generalized method for RNA isolation from mature leaf tissues of several economically important woody (17) and herbaceous plants (2) rich in secondary metabolites. High yields were achieved from small amount (up to 50 mg) of plant material. Two main modifications were applied to the basic protocol: an increase in β-mercaptoethanol concentration (to 10%v/v) and the use of an effective DNase treatment. As opposed to similar studies, we tried to describe a more detailed protocol for isolating RNA, including the exact quantity and concentration of the reagents were used. Results Our modified CTAB method is proved to be efficient in extracting the total RNA from a broad range of woody and herbaceous species. The RNA yield was ranged from 2.37 to 91.33 µg/µl. The A260:A280 and A260:A230 absorbance ratios were measured from 1.77 to 2.13 and from 1.81 to 2.22. The RIN value (RNA Integrity Number) of the samples fell between 7.1 and 8.1, which indicated that a small degree of RNA degradation occurred during extraction. The presence of a single peak in the melt curve analyses and low standard errors of the Ct values of replicated measurements indicated the specificity of the primers to bind to the cDNA. Conclusions Our RNA isolation method, with fine-tuned and detailed instructions, can produce high quality RNA from a small amount of starting plant material that is suitable for use in downstream transcriptional analyses. The use of an increased concentration of the reducing agent β-mercaptoethanol in the extraction buffer, as well as the application of DNaseI-treatment resulted in a method suitable for a wide range of plants without the need of further optimalization, especially in Rhus typhina (Staghorn sumac), for which molecular-genetic studies have not yet been sufficiently explored.

Abstract Background Blood transcriptomic analysis is widely used to provide a detailed picture of a physiological state with potential outcomes for applications in diagnostics and monitoring of the immune response to vaccines. However, multi-species transcriptomic analysis is still a challenge from a technological point of view and a standardized workflow is urgently needed to allow interspecies comparisons. Results Here, we propose a single and complete total RNA-Seq workflow to generate reliable transcriptomic data from blood samples from humans and from animals typically used in preclinical models. Blood samples from a maximum of six individuals and four different species (rabbit, non-human primate, mouse and human) were extracted and sequenced in triplicates. The workflow was evaluated using different wet-lab and dry-lab criteria, including RNA quality and quantity, the library molarity, the number of raw sequencing reads, the Phred-score quality, the GC content, the performance of ribosomal-RNA and globin depletion, the presence of residual DNA, the strandness, the percentage of coding genes, the number of genes expressed, and the presence of saturation plateau in rarefaction curves. We identified key criteria and their associated thresholds to be achieved for validating the transcriptomic workflow. In this study, we also generated an automated analysis of the transcriptomic data that streamlines the validation of the dataset generated. Conclusions Our study has developed an end-to-end workflow that should improve the standardization and the inter-species comparison in blood transcriptomics studies. In the context of vaccines and drug development, RNA sequencing data from preclinical models can be directly compared with clinical data and used to identify potential biomarkers of value to monitor safety and efficacy.

Introduction: Human saliva was used to develop non-invasive liquid biopsy biomarkers to establish saliva as an alternate to blood and plasma in translational research. The present study focused on understanding the impact of sample storage conditions on the extraction of RNA from saliva and the RNA yield, to be applied in clinical diagnosis. In this study, genes related to asthma were used to test the method developed.Methods: Salivary RNA was extracted from three subjects using the Qiazol® based method and quantified by both spectrophotometric (NanoDrop) and fluorometric (Qubit®) methods. RNA integrity was measured using a bioanalyzer. Quantitative PCR was used to monitor the impact of storage conditions on the expression of housekeeping genes: GAPDH and β-actin, and the asthma related genes: POSTN and FBN2. In addition, an independent cohort of 38 asthmatics and 10 healthy controls were used to validate the expression of POSTN and FBN2 as mRNA salivary biomarkers.Results: Approximately 2 µg of total RNA was obtained from the saliva stored at 40°C without any preservative for 2 weeks showing consistent gene expression with RNA stored at room temperature (RT) for 48 h with RNAlater. Although saliva stored with RNAlater showed a substantial increase in the yield (110 to 234 ng/μL), a similar Cq (15.6 ± 1.4) for the 18s rRNA gene from saliva without preservative showed that the RNA was stable enough. Gene expression analysis from the degraded RNA can be performed by designing the assay using a smaller fragment size spanning a single exon as described below in the case of the POSTN and FBN2 genes in the asthma cohort.Conclusion: This study showed that samples stored at room temperature up to a temperature of 40°C without any preservative for 2 weeks yielded relatively stable RNA. The methodology developed can be employed to transport samples from the point of collection to the laboratory, under non-stringent storage conditions enabling the execution of gene expression studies in a cost effective and efficient manner.

Since the end of 2019, COVID-19 pandemic caused by the novel SARS-CoV-2 has become a serious problem for the world. Accurate and rapid techniques in testing and tracing are needed to control the virus spreading. Molecular diagnostics through gene amplification techniques, especially PCR, still become the gold standard for SARS-CoV-2 detection, which requires the first step of RNA extraction and purification. The limitations of commercial RNA extraction-purification kits during the pandemic caused a big problem in testing and tracing, especially for developing countries. A simple RNA extraction-purification kit based on magnetic-silica (MAGSi) beads and non-guanidine in-house buffers for RNA virus extraction-purification has been developed. Two types of MAGSi beads with different magnetic nanoparticles (MNPs) content were synthesized through a modified Stöber’s method using the sonication technique. The PCR result shows that both the MAGSi beads and the buffer can be used as a kit for RNA extraction-purification, tested for SARS-CoV-2 and Canine Distemper Virus. Further study shows that MAGSi-1 has better RNA extraction ability, and a higher concentration of RNA has been extracted. This is likely because of the smaller particle size distribution (50–1,500 nm distribution) and higher magnetization (20.2 emu/g) of MAGSi-1 compared to MAGSi-2 with 100–1,700 nm size distribution and 14.2 emu/g magnetization.

Since early 2024, a multistate outbreak of highly pathogenic avian influenza H5N1 has been affecting dairy cattle in the USA. The influenza viral RNA concentrations in milk make it an ideal matrix for surveillance purposes. However, viral RNA detection in multi-component fluids such as milk can be complex, and optimization of influenza detection methods is thus required. Raw bulk tank milk and mastitis milk samples were artificially contaminated with an avian influenza strain and subjected to five extraction methods. HCoV-229E and synthetic RNA were included as exogenous internal process controls. Given the high viral load usually observed in individual raw milk samples, four out of five tested methods would enable influenza detection in milk with normal texture, over a time window of at least 2 weeks post-onset of clinical signs. Nevertheless, sample dilution 1:3 in molecular transport medium prior to RNA extraction provided the best results for dilution of inhibitory substances and a good recovery rate of influenza RNA, that reached 12.5 ± 1.2% and 10.4 ± 3.8% in two independent experiments in bulk milk and 11.2 ± 3.6% and 10.0 ± 2.9% on two cohorts of mastitis milk samples. We have also shown compatibility of an influenza RT-qPCR system with synthetic RNA detection for simultaneous validation of the RNA extraction and RT-qPCR processes.

Background Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has created high demand for molecular kits and consumables for mass screening of suspected individuals. Direct real-time polymerase chain reaction (RT-PCR) assay without nucleic acid extraction has several advantages in saving testing time and cost and helps in the rapid reporting of SARS-CoV-2. The present study evaluated the analytical performance of four SARS-CoV-2 RT-PCR for direct RT-PCR testing using preheated specimens.

Chikungunya virus (Togaviridae, Alphavirus; CHIKV) is a mosquito-borne global health threat. The main urban vector of CHIKV is the Aedes aegypti mosquito, which is found throughout Brazil. Therefore, it is important to carry out laboratory tests to assist in the virus’s diagnosis and surveillance. Most molecular biology methodologies use nucleic acid extraction as the first step and require quality RNA for their execution. In this context, four RNA extraction protocols were evaluated in Ae. aegypti experimentally infected with CHIKV. Six pools were tested in triplicates (n = 18), each containing 1, 5, 10, 20, 30, or 40 mosquitoes per pool (72 tests). Four commercial kits were compared: QIAamp®, Maxwell®, PureLink®, and PureLink® with TRIzol®. The QIAamp® and PureLink® with TRIzol® kits had greater sensitivity. Two negative correlations were observed: as the number of mosquitoes per pool increases, the Ct value decreases, with a higher viral load. Significant differences were found when comparing the purity and concentration of RNA. The QIAamp® protocol performed better when it came to lower Ct values and higher RNA purity and concentration. These results may provide help in CHIKV entomovirological surveillance planning.

Abstract Background High-purity RNA serves as the basic requirement for downstream molecular analysis of plant species, especially the differential expression of genes to various biotic and abiotic stimuli. But, the extraction of high-quality RNA is usually difficult from plants rich in polysaccharides and polyphenols, and their presence usually interferes with the downstream applications. The aim of the study is to optimize the extraction of high-quality RNA from diverse plant species/tissues useful for downstream molecular applications. Results Extraction of RNA using commercially available RNA extraction kits and routine hexadecyltrimethylammonium bromide (CTAB) methods did not yield good quality DNA-free RNA from Prosopis cineraria, Conocarpus erectus, and Phoenix dactylifera. A reliable protocol for the extraction of high-quality RNA from mature leaves of these difficult-to-extract trees was optimized after screening nine different methods. The DNase I-, and proteinase K treatment-free modified method, consisting of extraction with CTAB method followed by TRIzol, yielded high-quality DNA-free RNA with an A260/A280 and A260/A230 ratios > 2.0. Extraction of RNA from Conocarpus, the most difficult one, was successful by avoiding the heat incubation of ground tissue in a buffer at 65 oC. Pre-warming of the buffer for 5–10 min was sufficient to extract good-quality RNA. RNA integrity number of the extracted RNA samples ranged between 7 and 9.1, and the gel electrophoresis displayed intact bands of 28S and 18S RNA. A cDNA library constructed from the RNA of P. cineraria was used for the downstream applications. Real-time qPCR analysis using the cDNA from P. cineraria RNA confirmed the quality. The extraction of good quality RNA from samples of the desert-growing P. cineraria (> 20-years-old) collected in alternate months of the year 2021 (January to December covering winter, spring, autumn, and the very dry and hot summer) proved the efficacy of the protocol. The protocol’s broad applicability was further validated by extracting good-quality RNA from 36 difficult-to-extract plant species, including tissues such as roots, flowers, floral organs, fruits, and seeds. Conclusions The modified DNase I and Proteinase K treatment-free protocol enables to extract DNA-free, high-quality, intact RNA from a total of 39 difficult-to-extract plant species belonging to 32 angiosperm families is useful to extract good-quality RNA from dicots and monocots irrespective of tissue types and growing seasons.

Abstract RNA extraction from Mycobacterium tuberculosis has been a historically challenging task for researchers due to the thick lipids associated with the cell wall of this “notorious” pathogen that is responsible for Tuberculosis (TB) outbreaks. Several studies have successfully extracted RNA from M. tuberculosis using a Trizol reagent combined with organic solvents. Recently, our laboratory has successfully extracted high quality total RNA using a commercial kit from clinical strains belonging to F15/LAM4/KZN, Beijing and F11 strain families and H37Rv laboratory strain by exploiting high speed homogenizer for cell lysis and spin columns for RNA purification. The quality and integrity of the extracted RNA was analyzed and confirmed through the Nanodrop, Bioanalyzer and RNA 3-(N-morpholino) propanesulfonic acid (MOPS) gel electrophoresis. Furthermore, to confirm the integrity of small RNA (sRNA) molecules due to their vulnerability to degradation, the RNA samples were converted to cDNA and sRNAs were amplified and confirmed through PCR. This detailed RNA extraction protocol proposes to carve a new path into TB transcriptome research without the use of organic solvent for downstream purification steps while yielding high quality RNA that can be used to understand M. tuberculosis transcriptome regulation.

The golden-headed lion tamarin (Leontopithecus chrysomelas) is an endangered primate endemic to the Atlantic Forest. Conservation efforts for the species involve applying reproductive biotechniques to preserve genetic resources and ensure the management of populations in both ex situ and in situ conditions. This study aims to initiate investigations into seminal and molecular factors influencing the reproductive potential of sexually mature males. Semen was collected using the penile vibrostimulation technique, and seminal parameters were assessed in two groups: the 'Old' group (average age 11.6 years; n=6) and the 'Young' group (average age 4.8 years; n=6). ANOVA results indicated age-related influences on plasma membrane integrity (p=0.049), acrosomal integrity (p=0.009), and DAB IV (p=0.026) for both groups. Linear regression revealed significant correlations between seminal parameters and age (plasma membrane integrity (p=0.021), acrosomal integrity (p=0.05), and DAB III (p=0.024)), alongside animal weight (plasma membrane integrity (p=0.010), acrosomal integrity (p=0.009), DAB III (p=0.33), and DAB IV (p=0.066)). In an effort to advance reproductive techniques and sperm selection, a protocol utilizing a discontinuous Percoll gradient was employed. Despite its effectiveness in isolating gametes, there were no significant gains in the reevaluated parameters post-selection, necessitating adjustments in the methodology. While semen cryopreservation is common in wild species, challenges arise due to seminal coagulum in many neotropical primate ejaculates, hindering gamete use in reproductive procedures. Given the precious nature of and the considerable effort involved in collecting semen from these animals, it would be desirable to maximize the sample's utility. The liquid fraction could be applied in reproductive biotechniques, while the spermatozoa contained in the clot could be utilized as a non-invasive approach for molecular evaluation of these gametes. This study established a protocol for RNA extraction from sperm retained in the seminal coagulum, highlighting its genetic richness often discarded post-processing. In summary, our study emphasizes the importance of early cryopreservation of semen to safeguard the reproductive potential of L. chrysomelas. Additionally, we propose further exploration of RNA quantity in gametes as a non-invasive tool for inferring male fertility, given the pivotal role of sperm RNA transcripts in regulating the activation of the female gamete and gene expression during early embryo development.

Polymer-based lab-on-a-disc (LoaD) devices for isolating ribonucleic acid (RNA) from whole blood samples have gained considerable attention for accurate biomedical analysis and point-of-care diagnostics. However, the mass production of these devices remains challenging in manufacturing cost and sustainability, primarily due to the utilization of a laser cutter or router computer numerical control (CNC) machine for engraving and cutting plastics in the conventional prototyping process. Herein, we reported the first energy-efficient room-temperature printing-imprinting integrated roll-to-roll manufacturing platform for mass production of a polydimethylsiloxane (PDMS)-based LoaD to on-site isolate ribonucleic acid (RNA) from undiluted blood samples. We significantly reduced energy consumption and eliminated thermal expansion variations between the mold, substrate, and resists by accelerating the PDMS curing time to less than 10 min at room temperature without using heat or ultraviolet radiation. The additive manufacturing technology was applied to fabricate a multi-depth flexible polymer mold that integrated macro (2 mm) and micro-sized (500 μm) features, which overcomes the economic and environmental challenges of conventional molding techniques. Our integrated R2R platform was enabled to print adhesion-promoting films at the first printing unit and continuously in-line imprint with a high replication accuracy (99%) for high-volume manufacturing of a new centrifugal microfluidic chip with an enhancement of mixing performance by integrating an efficient mixing chamber and serpentine micromixer. This research paved the way for scalable green manufacturing of large-volume polymer-based microfluidic devices, often required in real-world sample-driven analytical systems for clinical bioanalysis.

Introduction: While genetic analysis of archived formalin-fixed paraffin embedded (FFPE) tissue specimens would be a significant research resource, extraction of high-quality DNA and RNA from these specimens is a significant challenge. Storage duration, tissue handling and tissue preservation processes as well as their interactions with the nucleic acids could influence the quality and integrity of the DNA or RNA required for genetic analysis. Objectives: The goal of this study was to establish a protocol to extract high quality DNA and RNA from the FFPE tissues for further use in quantitative PCR analysis. Methods: For the purposes of this study, human FFPE biopsy tissues from lung, liver, colon and kidney were obtained from a single center biorepository. GeneJET Genomic DNA Purification Kit (Catalog # K0722) obtained from Thermo Fisher Scientific and RecoverAll Total Nucleic Acid Isolation Kit obtained from Life Technologies were modified and used for extraction of DNA and RNA, respectively. Briefly, modifications involved extending reagent incubation times, increasing sample volumes and wash steps, and increased final nucleic acids recovery and concentration steps. Eight sections around 8-10 ?m thick were microtomed for each tissue sample and used for extraction. The purity of the nucleic acids obtained was verified using Nanodrop Spectrophotometer. Results: The average DNA yield from eight sections for each of the tissues was 270±184 ng/?l and for RNA was 296±188 ng/?l. Nucleic acid quality was assessed by measuring the 260nm/280nm absorbance ratio for protein contamination as well as the 260nm/230nm absorbance ratio for salt contamination. Both were found to be within acceptable ranges. RNA was reverse transcribed to cDNA and qPCR was successfully performed on both DNA and cDNA samples. Conclusions: These results indicate that protocols using the silica-based membrane technology can yield high quality DNA and RNA that can be successfully used for downstream genetic analysis.

AbstractHigh-quality mRNA extraction is essential for gene expression assays. In this study, we developed a rapid method (20 min) named FACTS for the extraction of intact RNA from Pseudomonas aeruginosa and compared its performance to established rapid techniques like RNAsnap and CiAR. The RNA integrity, yield, purity and presence of residual genomic DNA were adopted as assessment criteria. Multiple assays for RNA integrity were applied, including the Agilent 2200 TapeStation, QIAxcel capillary electrophoresis, and the newly available Qubit RNA Integrity and Quality (IQ) Assay Kit. The RNA purity and DNA/RNA yield were assessed by spectrophotometry and fluorimetry, respectively. Following Dnase treatment, two-step RT-qPCR for the expression of the rpoD reference gene was performed to evaluate the performance of each method. In terms of RNA integrity, FACTS showed the highest RNA integrity, while in terms of purity, CiAR scored best. RNAsnap resulted in a substantial amount of residual DNA. Pilot experiments for RNA extraction with FACTS from other Gram-negative and Gram-positive bacteria revealed promising results. FACTS is a novel RNA extraction method for rapid highly effective extraction of high-quality RNA from P. aeruginosa and can be used as a cost-efficient alternative to other methods in gene expression studies.

Human noroviruses (HuNoVs) are among the main causes of acute gastroenteritis worldwide. HuNoVs can survive for several days up to weeks at room temperature in the environment, on food, and on food handling and processing surfaces. As a result, this could lead to viral spread through the ingestion of food in contact with contaminated surfaces. The development of stable surface materials with antiviral activity might be useful to reduce viral outbreaks. Metal-based compounds, including photoactivated titanium nanoparticles (TiO2 NPs), are known for their antiviral activity. In this study, we tested the impact of 2000 µg/mL TiO2 NPs, with or without UV activation, on HuNoV GII and murine norovirus. Their recovery rates were reduced by 99.6%. We also evaluated a new TiO2 NP-coating process on a polystyrene surface. This process provided a homogenous coated surface with TiO2 NPs ranging between 5 nm and 15 nm. Without photoactivation, this TiO2 NP-coated polystyrene surface reduced the recovery rates of intact HuNoV GII by more than 94%. When a capsid integrity treatment with PtCl4 or a longer reverse transcription polymerase chain detection approach was used to evaluate virus integrity following contact with the TiO2 NP-coated polystyrene, the HuNoV GII recovery yield reduction varied between 97 and 100%. These results support the hypothesis that TiO2 NP-coated surfaces have the potential to prevent viral transmission associated with contaminated food surfaces.

Peripheral blood is the most practical tissue for human immune system gene expression profiling because it is easily accessible, whereas the site of primary infection in certain diseases may not be easily accessible. Due to the ex vivo instability of RNA transcripts, a key challenge in the gene expression analysis of blood samples is the rapid sample handling and stabilization of the mRNA by adding an RNA preservative (PAXgeneTM Blood RNA Tubes, TempusTM Blood RNA tubes, RNAlater Stabilization Reagent, RNAgard® Blood Tubes). BioMole (Turin, Italy) has developed a novel blood stabilizer, called RNApro, in which RNA is stabilized during phlebotomy and sample storage. In this study, RNApro performance intended as RNA yield, integrity, and stability was evaluated. Our results show that blood samples stored at −80 °C and re-extracted after 7 years show no differences in terms of quantity, quality, and amplificability. The samples in the RNAlater stabilization solution can be stored at room temperature for up to one week or at 4 °C for up to one month. Similar results can also be observed for PAXgene tubes, Tempus tubes, and RNAgard tubes. In agreement with these data, the RNApro stabilization solution preserves the RNA from degradation for up to 1 month at 4 °C and 1 week at room temperature. RNApro can be stored indifferently at −80, −20, 4 °C, or room temperature for up to 2 months after, and then could be stored at −80 °C for up to seven years. In summary, our study is the first to analyze the performance of an RNA stabilizer called RNApro. We can conclude that several studies have shown significant differences in gene expression analysis when the sample was preserved in different RNA stabilizers. Therefore, it is desirable to standardize the method of nucleic acid conservation when comparing data from transcriptomic analyses.

A comprehensive gene expression investigation requires high-quality RNA extraction, in sufficient amounts for real-time quantitative polymerase chain reaction and next-generation sequencing. In this work, we compared different RNA extraction methods and evaluated different reference genes for gene expression studies in the fetal human inner ear. We compared the RNA extracted from formalin-fixed paraffin-embedded tissue with fresh tissue stored at −80 °C in RNAlater solution and validated the expression stability of 12 reference genes (from gestational week 11 to 19). The RNA from fresh tissue in RNAlater resulted in higher amounts and a better quality of RNA than that from the paraffin-embedded tissue. The reference gene evaluation exhibited four stably expressed reference genes (B2M, HPRT1, GAPDH and GUSB). The selected reference genes were then used to examine the effect on the expression outcome of target genes (OTOF and TECTA), which are known to be regulated during inner ear development. The selected reference genes displayed no differences in the expression profile of OTOF and TECTA, which was confirmed by immunostaining. The results underline the importance of the choice of the RNA extraction method and reference genes used in gene expression studies.

Abstract Background There is a growing interest in transcriptomics studies parallel to the advancement of transcriptome databases and bioinformatics, which provided the opportunity to study responses to growths, stimuli and stresses. There is an increase in demand for excellent RNA extraction techniques. General RNA extraction protocols can be used in RNA extraction, but the quality and quantity vary in different types of tissues from different organisms. Hence, a specific RNA extraction method for each organism’s tissue type is required to obtain the desired RNA quality and quantity. Results The improved CTAB RNA extraction method is superior to the PCI method and MRIP method for thick waxy leaves that were applied for mature sago palm (Metroxylon sagu Rottb.) leaf tissue and produce total RNA extract with good purity (OD 260/280 ≥ 1.8, OD 260/230 ≥ 2.0) and integrity (RIN ~ 7). RNA sequencing was conducted with the extracted samples and showed good assembly results (Q20 ≥ 97, Q30 ≥ 91%, assembly mean length ≥ 700 bp). Conclusion The improved CTAB RNA extraction method enables rapid, cost-effective, and relatively simple RNA extraction from waxy, fibrous and high-in-polyphenol sago palm (M. sagu Rottb.) leaf tissue with next-generation RNA sequencing recommended quality. Graphical Abstract

Abstract Premise The isolation of RNA from trees is challenging due to the interference of polyphenols and polysaccharides with downstream processes. Furthermore, many RNA extraction protocols are time consuming and involve hazardous chemicals. To address these issues, we aimed to develop a safe protocol for high‐quality RNA extraction from diverse Metrosideros taxa representing a broad range of leaf toughness, pubescence, and secondary metabolites. Methods and Results We tested popular RNA isolation kits and protocols that were effective on other recalcitrant trees, including a broad range of optimization and purification steps. We optimized a protocol involving two silica‐membrane column‐based kits that yielded high‐quantity RNA with an RNA integrity number >7 and without DNA contamination. All RNA samples were used successfully in a follow‐on RNA‐Seq experiment. Conclusions We present an optimized high‐throughput RNA extraction protocol that yielded high‐quality and high‐quantity RNA from three contrasting leaf phenotypes within a hyperdiverse woody species complex.

The emergence of the coronavirus 2019 (COVID-19) arose the need for rapid, accurate and massive virus detection methods to control the spread of infectious diseases. In this work, a device, deployable in non-medical environments, has been developed for the detection of non-amplified SARS-CoV-2 RNA. A SARS-CoV-2 specific probe was designed and covalently immobilized at the surface of glass slides to fabricate a DNA biosensor. The resulting system was integrated in a microfluidic platform, in which viral RNA was extracted from non-treated human saliva, before hybridizing at the surface of the sensor. The formed DNA/RNA duplex was detected in presence of SYBR Green I using an opto-electronic system, based on a high-power LED and a photo multiplier tube, which convert the emitted fluorescence into an electrical signal that can be processed in less than 10 min. The limit of detection of the resulting microfluidic platform reached six copies of viral RNA per microliter of sample (equal to 10 aM) and satisfied the safety margin. The absence of non-specific adsorption and the selectivity for SARS-CoV-2 RNA were established. In addition, the designed device could be applicable for the detection of a variety of viruses by simple modification of the immobilized probe.

ABSTRACT tRNAs and ribosomal RNAs are often considered stable RNAs. In contrast to this view, we recently proposed that tRNAs are degraded during amino acid starvation and drug-induced transcription inhibition. However, reevaluation of our experimental approach revealed that common RNA extraction methods suffer from alarming extraction and size biases that can lead to gross underestimation of RNA levels in starved Escherichia coli populations. Quantification of tRNAs suffers additional biases due to differing fractions of tRNAs with base modifications in growing versus starved bacteria. Applying an improved methodology, we measured tRNA levels after starvation for amino acids, glucose, phosphate, or ammonium and transcription inhibition by rifampicin. We report that tRNA levels remain largely unaffected in all tested conditions, including several days of starvation. This confirms that tRNAs are remarkably stable RNAs and serves as a cautionary tale about quantification of RNA from cells cultured outside the steady-state growth regime. rRNA, conversely, is extensively degraded during starvation. Thus, E. coli downregulates the translation machinery in response to starvation by reducing the ribosome pool through rRNA degradation, while a high concentration of tRNAs available to supply amino acids to the remaining ribosomes is maintained. IMPORTANCE We show that E. coli tRNAs are remarkably stable during several days of nutrient starvation, although rRNA is degraded extensively under these conditions. The levels of these two major RNA classes are considered to be strongly coregulated at the level of transcription. We demonstrate that E. coli can control the ratio of tRNAs per ribosome under starvation by means of differential degradation rates. The question of tRNA stability in stressed E. coli cells has become subject to debate. Our in-depth analysis of RNA quantification methods reveals hidden technical pitfalls at every step of the analysis, from RNA extraction to target detection and normalization. Most importantly, starved E. coli populations were more resilient to RNA extraction than unstarved populations. The current results underscore that the seemingly trivial task of quantifying an abundant RNA species is not straightforward for cells cultured outside the exponential growth regime.

We compared a bead RNA extraction method with a one-tube method that required only a heat block and ice. RNA was first extracted from liver samples from nine rabbits dying from rabbit hemorrhagic disease virus 2 (RHDV2) using magnetic beads, and RT-PCR was used to detect RHDV2 sequence. Following freezing, RNA was extracted a second time using the SwiftX™ Swabs Viral RNA Extraction Reagent. RHDV2 was detected in all nine samples. Cycle threshold values were higher in the RT-PCR following SwiftX extraction (mean: 3.79), indicating that the second extraction method resulted in approximately a 1 log10 reduction in sensitivity. A second freeze–thaw for the samples and less tissue extracted using SwiftX may have contributed additionally to the loss in sensitivity.

Procuring high-grade RNA from mature coconut tissues is a tricky and labor-intensive process due to the intricate scaffold of polysaccharides, polyphenols, lipids, and proteins that form firm complexes with nucleic acids. However, we have effectively developed a novel method for the first time, letting the retrieval of high-grade RNA from the roots, endosperm, and mesocarp of mature coconut trees take place. In this method, we exploited dichloromethane as a replacement to phenol/chloroform for RNA recovery from mature coconut tissues. The amount of high-grade RNA acquired from the roots of mature coconut trees was 120.7 µg/g, with an A260/280 ratio of 1.95. Similarly, the mature coconut mesocarp yielded 134.6 µg/g FW of quality RNA with A260/280 ratio of 1.98, whereas the mature coconut endosperm produced 120.4 µg/g FW of quality RNA with A260/280 ratio of 2.01. Furthermore, the RNA isolation using the dichloromethane method exhibited excellent performance in downstream experiments, particularly in RT-PCR for cDNA production and amplification. On the contrary, the RNA plant kit, TRIZOL, and Cetyl Trimethyl Ammonium Bromide (CTAB) methods were unsuccessful in isolating substantial quantities of RNA with exceptional purities from the mentioned coconut tissues. In view of these findings, we conclude that the newly developed method will be pivotal in effectively extracting RNA with high purity from mature coconut tissues.

Purpose. Grapevines (Vitis spp.) are affected by many viral diseases which cause serious pathological problems. GLRaV-3 is among the most widespread leafroll viruses, while Grapevine Fanleaf Virus (GFLV) is a destructive pathogen which reduces the lifespan of grapevine. Considering the impact and the spread of these diseases, our objective was to analyse the presence of these two viruses in several grapevine varieties in grapevine collection at ATTC Vlore. Data gathered from plant pathogens serve to better understand and prevent the spread of pathogens, as a mandatory rule for the quality control of certified plant material during vegetative propagation. Method. The presence of two common viruses were tested using virus specific primers; LC1/LC2 primer pair designed from the hHSP70 gene for detecting Grapevine Leafroll-associated Virus-3 (GLRaV3) and C3390/H2999 primer pair, designed from coat protein coding regions for detecting Grapevine Fanleaf Virus (GFLV), in six varieties; ‘Merlot’, ‘Kallmet’, ‘Shesh i zi’, ‘Shesh i bardhё’, ‘Debinё’, and ‘Pulёz’, provided through a randomised sampling procedure. One Step Reverse Transcription Polymerase Chain Reaction assay was used to detect the viral presence. Results showed a high (100%) prevalence of GLRaV3 virus in all of analysed samples, as the most frequent among the two pathogens. Analysis for of GFLV virus showed low infection rate, being present in only one sample. Conclusions. We herein show an efficient, fast and reproducible method for detecting grapevine viruses through one step RT-PCR. Our results suggest that sampling of the infected plant material should be avoided due to the presence of viral infections.

Isolation of an adequate quantity of high-quality RNA is a crucial step in gene expression analysis. Difficulties in sampling and RNA extraction of field-grown crops, especially from roots, are substantial obstacles to understanding actual gene expression in the field. We examined the effectiveness of the RNA extraction method (FRP) using pot- and field-grown soybean roots. High quantity and quality of total RNA could extract by the FRP method from both pot- and field-grown soybean roots at different growth stages. To determine the influence of root washing during the sampling process, roots were washed with water for 5 s, 1 min, and 5 min, then analyzed for aquaporin gene expression levels. Root washing for 5 min affected gene expression of some aquaporins. To obtain RNA that reflects the correct gene expression profile, it is necessary to minimize the effects of the sampling process.

Almost 100 yrs. after the 1918 Spanish Flu Pandemic, world is witnessing “Covid-19”, another Pandemic of similar scale. Interesting, parallels are being drawn between these two pandemics –occurring a century apart; on their scale of spread, potential impact, global scare and attention, containment measures and even people are framing similar projections on possible course of the pandemic. While world was equally unprepared on many terms to safeguard itself from such a pandemic from SARS Cov-2 Virus, one scenario quite distinct from the previous pandemic scenario, is the current status of laboratories with advanced tools. Ground breaking genomic technologies such as NAAT (Nucleic acid Amplification technologies) or PCR (Polymerase Chain Reaction), which currently exist can be positioned as crucial weapons strategically for both community level operations and patient level care. We have the opportunity for cross learning from the experiences of the laboratories involved in Covid testing while informing our peers across policy, diagnostic and research domains, exciting the newcomers to join forces and educating all our associates who can be involved in supportive roles and the large numbers of innovators / supporters who can offer to improvise and strengthen on our current solutions.

The current coronavirus disease 2019 (COVID-19) pandemic has caused significant challenges throughout the world and a rapid, reliable diagnostic test is in high demand. Real-time reverse transcription polymerase chain reaction (RT-PCR) was one of the most quickly established methods of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection and is considered to be the gold standard. In this report, we share our experience of using two different testing platforms: the cobas 6800 SARS-CoV-2 test, an automated system that was recently granted Emergency Use Authorization by the FDA, and a laboratory-developed test based on the protocol from the Taiwan Centers for Disease Control (CDC). There was an overall 96.2% agreement between the two platforms. However, the positive agreement between the two platforms was only 80.0%. We found 3 instances of discordance between the two systems and this emphasized the need for timely diagnosis with a reliable testing platform.

Rapid, easy-to-use, and low-cost systems for biological sample testing are important for point-of-care diagnostics and various other health applications. The recent pandemic of Coronavirus Disease 2019 (COVID-19) caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) showed an urgent need to rapidly and accurately identify the genetic material of SARS-CoV-2, an enveloped ribonucleic acid (RNA) virus, in upper respiratory specimens from people. In general, sensitive testing methods require genetic material extraction from the specimen. Unfortunately, current commercially available extraction kits are expensive and involve time-consuming and laborious extraction procedures. To overcome the difficulties associated with common extraction methods, we propose a simple enzymatic assay for the nucleic acid extraction step using heat mediation to improve the polymerase chain reaction (PCR) reaction sensitivity. Our protocol was tested on Human Coronavirus 229E (HCoV-229E) as an example, which comes from the large coronaviridae family of viruses that affect birds, amphibians, and mammals, of which SARS-CoV-2 is a member. The proposed assay was performed using a low-cost, custom-made, real-time PCR system that incorporates thermal cycling and fluorescence detection. It had fully customizable reaction settings to allow versatile biological sample testing for various applications, including point-of-care medical diagnosis, food and water quality testing, and emergency health situations. Our results show that heat-mediated RNA extraction is a viable extraction method when compared to commercial extraction kits. Further, our study showed that extraction has a direct impact on purified laboratory samples of HCoV-229E, but no direct impact on infected human cells. This is clinically relevant, as it allows us to circumvent the extraction step on clinical samples when using PCR.

Staphylococcus aureus evades antibiotic therapy and antimicrobial defenses by entering human host cells. Bacterial transcriptomic analysis represents an invaluable tool to unravel the complex interplay between host and pathogen. Therefore, the extraction of high-quality RNA from intracellular S. aureus lays the foundation to acquire meaningful gene expression data. In this study, we present a novel and straightforward strategy to isolate RNA from internalized S. aureus after 90 min, 24 h, and 48 h postinfection. Real-time PCR data were obtained for the target genes agrA and fnba, which play major roles during infection. The commonly used reference genes gyrB, aroE, tmRNA, gmk, and hu were analyzed under different conditions: bacteria from culture (condition I), intracellular bacteria (condition II), and across both conditions I and II. The most stable reference genes were used for the normalization of agrA and fnbA. Delta Cq (quantification cycle) values had a relatively low variability and thus demonstrated the high quality of the extracted RNA from intracellular S. aureus during the early phase of infection. The established protocol allows the extraction and purification of intracellular staphylococcal RNA while minimizing the amount of host RNA in the sample. This approach can leverage reproducible gene expression data to study host–pathogen interactions.

Salinity is one of the most limiting constraints of crop production. Nevertheless, highly-tolerant crop plants (e.g. ‘Guar’ Cyamopsis tetragonoloba) can thrive well under salinity conditions. RNA-Seq plays a central role in identifying genes involved in the response mechanisms to salt stress in plant species. High-quality RNA, free of genomic DNA is a critical determinant for success in subsequent downstream experiments to shed light on tolerance mechanisms. In this research, an inspection of two different total RNA isolation protocols was employed for preparing highly pure and intact RNAs with good yield from Guar tissue under both high salinity and control conditions. The extracted RNA appeared in all quality metrics to be of adequate quantity and quality for most downstream applications, including high-throughput transcriptome sequencing and expression analysis. However, the outcomes showed that the most widely used RNA quality measurement, the RNA Integrity Number (RIN), is a poor indicator with a weak correlation to the integrity of RNA from this plant. In contrast to human and animal cells, plants have various ribosomal RNA species. Consequently, whenever the RNA was separated on an agarose gel, several RNA bands did appear, which gives the false impression of being unable to analyze the results of the bioanalyzer integrity. Low RIN number RNA samples were further processed by RNA-sequencing RNA-seq experiments from guar. RNA-seq analysis via Illumina’s paired-end method was carried out to trace back and evaluate the extracted total RNA, resulting in high-quality data for subsequent stress tolerance research.

Fast and precise detection of SARS-CoV-2 RNA in infected patients is essential for treatment decisions.

The coronavirus disease 2019 (COVID-19) pandemic has caused an international shortage of nasopharyngeal flocked swabs, which are one of the main supplies for diagnostic testing. In response to this issue, our institution developed locally made nasopharyngeal swabs. This report aims to provide a clinical evaluation by conducting a sterility test, reverse transcription polymerase chain reaction (RT-PCR) compatibility test, and a user-based survey test of two batches of locally made flocked swabs. Sterility and compatibility tests were conducted at our microbiology laboratory. Participants with clinical suspicion of COVID-19 were scheduled for swab tests using Flocked Swab HS-19 and samples obtained were tested using the RT-PCR method. The cycle threshold (Ct) value of the samples was recorded. A user-based survey was conducted to evaluate the swab stick and flocked-fiber tip performance. The sterility test showed no evidence of bacterial growth on both blood agar and thioglycolate medium. RT-PCR compatibility test from Ct value of 33 samples of the first batch and 30 samples of the second batch was recorded with a mean Ct of 27.17±2.96 and 23.99±2.18, respectively. Six parameters of the swab stick (comfortability, smoothness, flexibility, durability, applicability, and breakpoint performance) showed satisfactory scores with an average of 4.14 out of 5.0 for the first batch and 4.16 for the second batch, while 4 parameters of the flocked-fiber tip (fiber adherence, thickness, symmetricity, and sample collection sufficiency) revealed acceptable scores with an average of 3.6 out of 5.0 for the first batch and 3.75 for the second batch. This study indicates that locally made flocked swabs are satisfactory and clinically applicable for testing and diagnosing COVID-19. Furthermore, mass production and distribution across the country are expected. The development of these swabs, which involved multidisciplinary teamwork and various industrial partners, portrayed a valuable lesson on how to cope with the pandemic through innovation.

Background: Coconut tissues consist of a complex network of polysaccharides, proteins, polyphenols, and lipids that can bind to nucleic acids and pose difficulty in isolation. Certainly, a vigorous method is required to isolate high quality and quantity of RNA from such tissues for the purpose of downstream experiments. In this paper, we discuss a newly developed method for the Isolation of RNA from Complex Matrices (IRCM) method from coconut tissues. Results: The method is robust, cheap, and efficient for the extraction of quality RNA in high quantities from the solid endosperm of stored and fresh coconut (150 μg/g FW with A260/280 = 1.89 and 247.5 μg/g FW with A260/280 = 1.91), coconut apple (263.8 μg/g FW with A260/280 = 1.97), and coconut bud (1052.5 μg/g FW with A260/280 = 2.00). The other well established methods, such as Method of RNA Isolation from Palm (MRIP), Cetyl Trimethyl Ammonium Bromide (CTAB), TRIZOL, and RNA plant kit failed to isolate quality RNA in appreciable quantities from the coconut tissues. Furthermore, the resultant RNA performed well in the downstream experiment, that is, RT-PCR for the production and amplification of cDNA. Conclusions: From the study, we concluded that the present method will play a vital role in the extraction of high quality RNA from complex matrices in a short time.How to cite: Iqbal A, Yang Y, Wu Y, et al. An easy and robust method for the isolation of high quality RNA from coconut tissues. Electron J Biotechnol 2020;48. https://doi.org/10.1016/j.ejbt.2020.09.008

Abstract Background Sequencing technology advancements opened new opportunities to use transcriptomics for studying malaria pathology and epidemiology. Even though in recent years the study of whole parasite transcriptome proved to be essential in understanding parasite biology there is no compiled up-to-date reference protocol for the efficient generation of transcriptome data from growing number of samples. Here, a comprehensive methodology on how to preserve, extract, amplify, and sequence full-length mRNA transcripts from Plasmodium-infected blood samples is presented that can be fully streamlined for high-throughput studies. Results The utility of various commercially available RNA-preserving reagents in a range of storage conditions was evaluated. Similarly, several RNA extraction protocols were compared and the one most suitable method for the extraction of high-quality total RNA from low-parasitaemia and low-volume blood samples was established. Furthermore, the criteria needed to evaluate the quality and integrity of Plasmodium RNA in the presence of human RNA was updated. Optimization of SMART-seq2 amplification method to better suit AT-rich Plasmodium falciparum RNA samples allowed us to generate high-quality transcriptomes from as little as 10 ng of total RNA and a lower parasitaemia limit of 0.05%. Finally, a modified method for depletion of unwanted human haemoglobin transcripts using in vitro CRISPR-Cas9 treatment was designed, thus improving parasite transcriptome coverage in low parasitaemia samples. To prove the functionality of the pipeline for both laboratory and field strains, the highest 2-hour resolution RNA-seq transcriptome for P. falciparum 3D7 intraerythrocytic life cycle available to date was generated, and the entire protocol was applied to create the largest transcriptome data from Southeast Asian field isolates. Conclusions Overall, the presented methodology is an inclusive pipeline for generation of good quality transcriptomic data from a diverse range of Plasmodium-infected blood samples with varying parasitaemia and RNA inputs. The flexibility of this pipeline to be adapted to robotic handling will facilitate both small and large-scale future transcriptomic studies in the field of malaria.

Most strawberry viruses exist relatively low titers in tissues, and strawberry tissues include high levels of contamination by polysaccharides and phenolic compounds. These traits make the efficiency of strawberry diagnosis difficult. In this study, we tested different commercially available kits and reagents to secure optimal RNA extraction methods to determine virus detection from strawberry leaves. Total RNA was isolated from leaves of strawberry mottle virus (SMoV)-infected strawberry cultivar ‘Mihong’. The efficiency of total RNA for virus diagnosis was confirmed through SMoV detection by one-step or two-step reverse transcription and polymerase chain reaction (RT-PCR). Among those, the RNeasy plant RNA kit was best to isolate RNA and the isolated RNA was good enough for further applications. To ensure a reliable detection for strawberry viruses, synthetic diagnosis clones for major seven strawberry viruses such as strawberry mild yellow edge virus, SMoV, strawberry latent ring spot virus, strawberry crinkle virus, strawberry pallidosis associated virus, strawberry vein banding virus and strawberry necrotic spot virus have been constructed. Based on the synthetic genes in each clone, primer sets for seven strawberry viruses were designed and tested an RT-PCR condition through a simultaneous application of the same annealing temperature that allowed to achieve an efficient and convenient diagnosis.

Abstract Background Obtaining high-quality RNA for gene expression analyses from different seed tissues is challenging due to the presence of various contaminants, such as polyphenols, polysaccharides and lipids which interfere with RNA extraction methods. At present, the available protocols for extracting RNA from seeds require high amounts of tissue and are mainly focused on extracting RNA from whole seeds. However, extracting RNA at the tissue level enables more detailed studies regarding tissue specific transcriptomes during seed development. Results Seeds from heart stage embryo to mature developmental stages of Brassica napus and B. oleracea were sampled for isolation of the embryo, endosperm and seed coat tissues. Ovules and ovary wall tissue were also collected from pre-fertilized buds. Subsequent to testing several RNA extraction methods, modifications applied to E.Z.N.A. Plant RNA and Picopure RNA Isolation kit extraction methods resulted in RNA with high yield and quality. Furthermore, the use of polyvinylpolypyrrolidone for seed coats and endosperm at green stages resulted in high-quality RNA. As a result of the introduced modifications to established RNA extraction methods, the RNA from all the above-mentioned tissues presented clear 28S and 18S bands and high RIN values, ranging from 7.0 to 10.0. The protocols reported in this study are not only suitable for different and challenging seed tissue types, but also enable the extraction of high-quality RNA using only 2 to 3 mg of starting tissue. Conclusions Here, we present efficient, reproducible and reliable high-quality RNA extraction methods for diverse oilseed Brassica spp reproductive tissue types including pre-fertilization and developing seed tissues for diploid and polyploid species. The high-quality RNA obtained is suitable for RNA-Sequencing and subsequent gene expression analysis.

The ongoing pandemic of coronavirus disease 2019 (COVID‐19) caused by severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) has caused millions of deaths worldwide. However, most SARS‐CoV‐2 detection methods depend on time‐consuming sample preparation and large detection instruments. Herein, a method employing nonbleeding pH paper to achieve both RNA extraction and visual isothermal amplification is proposed, enabling rapid, instrument‐free SARS‐CoV‐2 detection. By taking advantage of capillary forces, pH‐paper‐based RNA extraction can be accomplished within 1 min without need for any equipment. Further, the pH paper can mediate dye‐free visual isothermal amplification detection. In less than a 46‐min sample‐to‐answer time, pH‐paper‐based extraction and visual detection (termed pH‐EVD) can consistently detect 1200 genome equivalents per microliter of SARS‐CoV‐2 in saliva, which is comparable to TaqMan probe‐based quantitative reverse transcription PCR (RT‐qPCR). Through coupling with a chemically heated incubator called a smart cup, the instrument‐free, pH‐EVD‐based SARS‐CoV‐2 detection method on 30 nasopharyngeal swab samples and 33 contrived saliva samples is clinically validated. Thus, the pH‐EVD method provides simple, rapid, reliable, low‐cost, and instrument‐free SARS‐CoV‐2 detection and has the potential to streamline onsite COVID‐19 diagnostics.

The gold standard for diagnostics of SARS-CoV-2 (COVID-19) virus is based on real-time polymerase chain reaction (RT-PCR) using centralized PCR facilities and commercial viral RNA extraction kits. One of the key components of these kits are magnetic beads composed of silica coated magnetic iron oxide (Fe2O3 or Fe3O4) nanoparticles, needed for the selective extraction of RNA. At the beginning of the pandemic in 2019, due to a high demand across the world there were severe shortages of many reagents and consumables, including these magnetic beads required for testing for SARS-CoV-2. Laboratories needed to source these products elsewhere, preferably at a comparable or lower cost. Here, we describe the development of a simple, low-cost and scalable preparation of magnetic nanoparticles (MNPs) from biowaste and demonstrate their successful application in viral RNA extraction and the detection of COVID-19. These MNPs have a unique nanoplatelet shape with a high surface area, which are beneficial features, expected to provide improved RNA adsorption, better dispersion and processing ability compared with commercial spherical magnetic beads. Their performance in COVID-19 RNA extraction was evaluated in comparison with commercial magnetic beads and the results presented here showed comparable results for high throughput PCR analysis. The presented magnetic nanoplatelets generated from biomass waste are safe, low-cost, simple to produce in large scale and could provide a significantly reduced cost of nucleic acid extraction for SARS-CoV-2 and other DNA and RNA viruses.

Abstract Background Utilization of RNA sequencing methods to measure gene expression from archival formalin-fixed paraffin-embedded (FFPE) tumor samples in translational research and clinical trials requires reliable interpretation of the impact of pre-analytical variables on the data obtained, particularly the methods used to preserve samples and to purify RNA. Methods Matched tissue samples from 12 breast cancers were fresh frozen (FF) and preserved in RNAlater or fixed in formalin and processed as FFPE tissue. Total RNA was extracted and purified from FF samples using the Qiagen RNeasy kit, and in duplicate from FFPE tissue sections using three different kits (Norgen, Qiagen and Roche). All RNA samples underwent whole transcriptome RNA sequencing (wtRNAseq) and targeted RNA sequencing for 31 transcripts included in a signature of sensitivity to endocrine therapy. We assessed the effect of RNA extraction kit on the reliability of gene expression levels using linear mixed-effects model analysis, concordance correlation coefficient (CCC) and differential analysis. All protein-coding genes in the wtRNAseq and three gene expression signatures for breast cancer were assessed for concordance. Results Despite variable quality of the RNA extracted from FFPE samples by different kits, all had similar concordance of overall gene expression from wtRNAseq between matched FF and FFPE samples (median CCC 0.63–0.66) and between technical replicates (median expression difference 0.13–0.22). More than half of genes were differentially expressed between FF and FFPE, but with low fold change (median |LFC| 0.31–0.34). Two out of three breast cancer signatures studied were highly robust in all samples using any kit, whereas the third signature was similarly discordant irrespective of the kit used. The targeted RNAseq assay was concordant between FFPE and FF samples using any of the kits (CCC 0.91–0.96). Conclusions The selection of kit to purify RNA from FFPE did not influence the overall quality of results from wtRNAseq, thus variable reproducibility of gene signatures probably relates to the reliability of individual gene selected and possibly to the algorithm. Targeted RNAseq showed promising performance for clinical deployment of quantitative assays in breast cancer from FFPE samples, although numerical scores were not identical to those from wtRNAseq and would require calibration.

ABSTRACT Laboratory surveillance for poliovirus (PV) relies on virus isolation by cell culture to identify PV in stool specimens from acute flaccid paralysis (AFP) cases. Although this method successfully identifies PV, it is time-consuming and necessitates the additional biorisk of growing live virus in an increasingly polio-free world. To reduce the risk of culturing PV, the Global Polio Laboratory Network (GPLN) must switch to culture-independent diagnostic methods with sensitivity at least equivalent to that of cell culture procedures. Five commercial nucleic acid extraction kits and one enrichment method were tested for PV extraction efficiency. RNA yield was measured using real-time reverse transcription (RT)-PCR. Based on greater RNA yield, compared with the other kits, the Quick-RNA viral kit was selected for further testing and was optimized using an RNA extraction procedure for stool suspensions. RNA extraction was retrospectively tested with 182 stool samples that had previously tested positive for PVs, in parallel with the standard GPLN virus isolation algorithm. After virus isolation or RNA extraction, real-time RT-PCR assays were performed. RNA extraction was significantly more sensitive than virus isolation (McNemar’s test, P < 0.001). Thereafter, the RNA extraction method was tested in parallel for 202 prospective samples; RNA extraction and virus isolation were not significantly different from each other (McNemar’s test, P = 0.13). Direct RNA extraction was noninferior to current cell culture methods for detecting PV in stool samples. Our results show that direct RNA extraction can make downstream manipulation safer and can reduce the risk of accidental posteradication viral release. The method is amenable to implementation in a wide variety of polio laboratories. IMPORTANCE Successfully identifying poliovirus from acute flaccid paralysis (AFP) cases is a vital role of the Global Polio Laboratory Network to achieve the goals of the Global Polio Eradication Initiative. Currently, laboratory surveillance relies on virus isolation by cell culture to test for PV present in stool samples. Although this method can identify polioviruses, laboratories must switch to culture-independent methods to reduce the risk associated with growing live viruses in a soon-to-be polio-free world. By implementing this streamlined method, in combination with real-time RT-PCR, laboratories can quickly screen for and type polioviruses of programmatic importance to support the final stages of global polio eradication.

RNA extraction is an important process before gene expression assessment at the transcriptomic level. RNA is a sensitive material to environmental factors such as temperature and contaminants, so the RNA extraction process generally requires sophisticated and expensive laboratory instruments. In this study, we extract RNA from Staphylococcus aureus bacteria using the PureLink® RNA Mini Kit. The instruments used in this study are basic instruments such as a hand homogenizer and non-thermal centrifuge. The results of RNA extraction were visualized using agarose gel electrophoresis. These results indicate that bacterial RNA extraction can be performed using the PureLink® RNA Mini Kit even with inexpensive basic laboratory instruments.

Background: The efficiency of isolation and purification of the viral genome is a critical step to the accuracy and reliability of RT-qPCR to detect SARS-CoV-2. However, COVID-19 testing laboratories were overwhelmed by a surge in diagnostic demand that affected supply chains especially in low and middle-income facilities. Objectives: Thus, this study compares the performance of alternative methods to extraction and purification of viral RNA in samples of patients diagnosed with COVID-19. Study design: Nasopharyngeal swabs were submitted to three in-house protocols and three commercial methods; viral genome was detected using the primer-probe (N1 and N2) described by CDC and viral load of samples were determined. Results: The in-house protocols resulted in detection of virus in 82.4 to 86.3% of samples and commercial methods in 94.1 to 98%. The disagreement results were observed in samples with low viral load or below the estimated limit of detection of RT-qPCR. Conclusion: The simplified methods proposed might be less reliable for patients with low viral load and alternative commercial methods showed comparable performance.

Background: Transcriptomic and lipidomic dual analyses usually initiate with independent extractive procedures. That entails a difficulty in aligning results from both omics platforms, especially in the case of highly heterogeneous tissues, such as the kidney. Methods: Bligh and Dyer lipid extraction was performed using rat kidney homogenates prepared in PBS or commercially available Tri-reagent used for RNA extraction. Samples were analyzed by ultrahigh performance liquid chromatography-mass spectrometry (UHPLC-MS) lipidomic analysis. Results: Comparison of the lipidome obtained from phosphate-buffered saline (PBS) and Tri-reagent homogenates showed qualitative and quantitative validity of the Tri-reagent homogenate with the exception of ether lipids; the acidic nature of the mix seems to promote the hydrolysis of the ether bond, especially in plasmalogens. We tested several conditions in the sample processing, which allowed to optimize the procedure. Conclusions: Aiming to implement a method that allows the extraction of RNA and lipids from the same tissue homogenate not using external tracers, we here report the use of Tri-reagent homogenates as a suitable starting material for UHPLC-MS lipidomic analysis.

Three-dimensional (3D) cell culture models that provide a biologically relevant microenvironment are imperative to investigate cell–cell and cell–matrix interactions in vitro. Semi-synthetic star-shaped poly(ethylene glycol) (starPEG)–heparin hydrogels are widely used for 3D cell culture due to their highly tuneable biochemical and biomechanical properties. Changes in gene expression levels are commonly used as a measure of cellular responses. However, the isolation of high-quality RNA presents a challenge as contamination of the RNA with hydrogel residue, such as polymer or glycosaminoglycan fragments, can impact template quality and quantity, limiting effective gene expression analyses. Here, we compare two protocols for the extraction of high-quality RNA from starPEG–heparin hydrogels and assess three subsequent purification techniques. Removal of hydrogel residue by centrifugation was found to be essential for obtaining high-quality RNA in both isolation methods. However, purification of the RNA did not result in further improvements in RNA quality. Furthermore, we show the suitability of the extracted RNA for cDNA synthesis of three endogenous control genes confirmed via quantitative polymerase chain reaction (qPCR). The methods and techniques shown can be tailored for other hydrogel models based on natural or semi-synthetic materials to provide robust templates for all gene expression analyses.

Objectives: The gold-standard COVID-19 diagnosis relies on detecting SARS-CoV-2 using RNA purification and one-step retrotranscription and quantitative PCR (RT-qPCR). Based on the urgent need for high-throughput screening, we tested the performance of three alternative, simple and affordable protocols to rapidly detect SARS-CoV-2, bypassing the long and tedious RNA extraction step and reducing the time to viral detection. Methods: We evaluated three methods based on direct nasopharyngeal swab viral transmission medium (VTM) heating before the RT-qPCR: a) direct without additives; b) in a formamide-EDTA (FAE) buffer, c) in a RNAsnapTM buffer. Results: Although with a delay in cycle threshold compared to the gold-standard, we found consistent results in nasopharyngeal swab samples that were subject to a direct 70°C incubation for 10 min. Conclusions: Our findings provide valuable options to overcome any supply chain issue and help to increase the throughput of diagnostic tests, thereby complementing standard diagnosis.

Abstract Background Obtaining sufficient RNA yield and quality for comprehensive transcriptomic studies is cumbersome for clinical samples in which RNA from the pathogen is present in low numbers relative to the nucleic acids from the host, especially for pathogens, such as yeasts, with a solid cell wall. Therefore, yeast cell lysis including cell wall disruption constitutes an essential first step to maximize RNA yield. Moreover, during the last years, different methods for RNA extraction from yeasts have been developed, ranging from classic hot phenol methods to commercially available specific kits. They offer different RNA yield and quality, also depending on the original storage medium, such as RNAlater. Results We observed that, for C. albicans cells stored in Tryptic Soy Broth with 15% glycerol, 10 min of bead beating in a horizontal position in RiboPure Lysis Buffer provided complete cell lysis. Cell lysis efficiency was decreased to 73.5% when cells were stored in RNAlater. In addition, the RiboPure Yeast Kit (Ambion) offered the highest RNA yield in comparison with the automated platform NucliSENS easyMAG total nucleic extraction (bioMérieux) and the RNeasy Mini Kit (Qiagen) according to NanoDrop and Fragment Analyzer. Moreover, we showed that, in spite of the decrease of cell lysis efficiency after RNAlater storage, as compared to storage in TSB + 15% glycerol, RNAlater increased RNA yield during RNA extraction with both RiboPure Yeast Kit and easyMAG, as confirmed by Fragment Analyzer analysis and by RT-qPCR of the RNA from the Internal Transcribed Spacer 2. Conclusions In our hands, the most efficient cell lysis and highest RNA yield from C. albicans cells stored in RNAlater was obtained by horizontal bead beating in RiboPure Lysis Buffer followed by RNA extraction with the RiboPure Yeast Kit.

Abstract Objective Studies of mRNA and miRNA expression profiling increasingly use stabilized whole blood. Commercial RNA extraction kits do not provide information about the simultaneous recovery of both mRNA and miRNA. This study evaluated yield, quality, integrity and representation of mRNA and miRNA from whole blood stabilized in Tempus tubes using three RNA extraction kits; two filter-based (Tempus and Norgen) and one bead-based (MagMax; manual vs. semi-automated, and with and without DNase treatment). Results All RNA extraction kits and methods resulted in similar yields of mRNA (total RNA yield, quality, integrity and representation) whereas there were differences in yields of miRNA. MagMax, either manual or semi-automated, with or without DNase treatment, yielded 1.6–2.2-fold more miRNA than Tempus and Norgen kits. In addition, MagMax and Norgen methods gave greater than 12-fold more and 3.3-fold less enrichment of specific miRNA targets, respectively, in comparison to Tempus extraction reagents. This study identified MagMax kit for simultaneous recovery of both mRNA and miRNA from whole blood collected in Tempus tubes.

Nucleic acid extraction from biological samples is an important step for hepatitis C virus (HCV) diagnosis. However, such extractions are mostly based on silica-based column methodologies, which may limit their application for on-site diagnosis. A simple, rapid, and field-deployable method for RNA extraction is still needed. In this study, we evaluated the efficacy of four simple RNA extraction methods for the detection of HCV in plasma samples: a silica-membrane-based method, a magnetic-beads-based method, boiling with diethyl pyrocarbonate (DEPC)-treated distilled water, and using a commercial lysis buffer. HCV RNA was detected using both real-time reverse transcription polymerase chain reaction (RT-PCR) and reverse transcription loop-mediated isothermal amplification (RT-LAMP). Using real-time RT-PCR, extracted RNA from the silica-membrane-based and magnetic-beads-based methods had a 100% detection rate for RNA extraction from plasma. Using RT-LAMP, extracted RNA from the silica-membrane-based method showed a 66% detection rate, while the magnetic-beads-based method had a 62% detection rate. In summary, magnetic-beads-based extraction can be used as an alternative RNA extraction method for on-site HCV detection. Boiling with DEPC-treated distilled water was not appropriate for low HCV load samples, and boiling with a lysis buffer was not recommended.

Background: Rapid diagnosis of COVID-19 is essential in order to restrict the spread of the pandemic, and different approaches for SARS-CoV-2 testing have been proposed as cost-effective and less time-consuming alternatives. For virus detection, the real-time reverse transcriptase–polymerase chain reaction (RT-PCR) technique is still the “gold standard” for accuracy and reliability, but its performance is affected by the efficiency of nucleic acid extraction methods. Objective: In order to improve the SARS-CoV-2 diagnostic workflow, we compared a “standard” commercially available kit, based on viral RNA extraction from human swab samples by magnetic beads, with its technological evolution. The two methods differ mainly in their time consumption (9 vs. 35 min). Methods: We adopted the MAGABIO PLUS VIRUS DNA/RNA PURIFICATION KIT II (BIOER), defined as “standard”, with the automatic extractor BIOER (GenePure Pro fully automatic nucleic acid purification system) to isolate RNA from nasopharyngeal swabs for the detection of SARS-CoV-2 by RT-PCR. We tested this kit with a new faster version of the first one, defined as “rapid” (MAGABIO PLUS VIRUS RNA PURIFICATION KIT II). Results and Conclusion: The two evaluated procedures provided similar analytical results, but the faster method proved to be a more suitable tool for the detection of SARS-CoV-2 from nasopharyngeal swabs, due to a more rapid availability of results, which may contribute to improving both clinical decision making and patient safety.