Search

For optimizing production yield while limiting negative environmental impact, sustainable agriculture benefits from real-time, on-the-spot chemical analysis of soil at low cost. Colorimetric paper sensors are ideal candidates, however, their automated readout and analysis in the field is needed. Using mobile technology for paper sensor readout could, in principle, enable the application of machine-learning models for transforming colorimetric data into threshold-based classes that represent chemical concentration. Such a classification method could provide a basis for soil management decisions where high-resolution lab analysis is not required or available. In tropical regions, where reliable soil data is difficult to acquire, this approach would be particularly useful. Here, we report a mobile chemical analysis system based on colorimetric paper sensors that operates under tropical field conditions. A standard smartphone equipped with a dedicated software application automatically classifies the paper sensor results into three classes-low, medium, or high soil pH-which provides a basis for soil correction. The classification task is performed by a machine-learning model which was trained on the colorimetric pH indicators deployed on the paper sensor. By mapping topsoil pH on a test site with an area of 9 hectares, the mobile system was benchmarked in the field against standard soil lab analysis. The mobile system has correctly classified soil pH in 97% of test cases, while reducing the analysis turnaround time from days (soil lab) to minutes (mobile). By performing on-the-spot analyses using the mobile system in the field, a 9-fold increase of spatial resolution reveals pH-variations not detectable in the standard compound mapping mode of lab analysis. We discuss how the mobile analysis can support smallholder farmers and enable sustainable agriculture practices by avoiding excessive soil correction. The system can be extended to perform multi-parameter chemical tests of soil nutrients for applications in environmental monitoring at marginal manufacturing cost.

Fetal alcohol spectrum disorder (FASD) is a complex neurodevelopmental disability characterized by a range of brain- and body-based difficulties which, when left unsupported, can lead to experiences of significant adversity across the lifespan. Caregivers of individuals with FASD play a critical role in advocating and supporting healthy outcomes for individuals with FASD, and most caregiver research to date has been focused on stressors and challenges. Very few studies have been conducted to systematically capture the full experience of caring for someone with FASD across the lifespan, including perspectives, concerns, as well as strengths and successes of caregivers and their families. Collaborative research with individuals with living experience is essential for understanding needs and supporting healthy outcomes for individuals with FASD and their families, and caregivers are in a unique and important position to provide perspectives and share living expertise. Therefore, the current study was developed collaboratively with caregivers and researchers to capture the many aspects of caregivers' contexts, concerns, needs, and successes in raising individuals with FASD. In this study protocol paper, we describe the rationale, development, design, and anticipated impacts of this research. The goal of this paper is to share information about why and how this study is being done, and potentially guide other teams in developing similar projects to better understand caregivers' experiences, needs, and successes. Documenting and giving voice to the breadth and depth of caregiver experiences will help us to tailor services and supports, develop resources, stimulate knowledge translation based in resilience and protective factors, guide future studies, and inform evidence-based policy initiatives.

With the continuous increase in the number of academic researchers, the volume of scientific papers is also increasing rapidly. The challenge of identifying papers with greater potential academic impact from this large pool has received increasing attention. The citation frequency of a paper is often used as an objective indicator to gauge the academic influence of the paper. The task of citation frequency prediction based on historical citation data in previous studies can achieve high accuracy. However, it can only be executed after the paper has been published for a period. The delay is not conducive to timely discovery of papers with high citation frequency. In this paper, we propose a novel method for predicting cited potential of a paper based on the metadata and semantic information, which can predict the cited potential of academic paper instantly once it has been published. Specifically, the semantic information, such as abstract, semantic span and semantic inflection, is extracted to enhance the ability of the prediction model based on machine learning. To prove the effectiveness and rationality of cited potential prediction model, we conduct two experiments to validate the model and find the most effective combination of input information. The empirical experiments show that the prediction accuracy of our proposed model can reach 88% for the instant prediction of citation.

Paper mulberry pollen, declared a pest in several countries including Pakistan, can trigger severe allergies and cause asthma attacks. We aimed to develop an algorithm that could accurately predict high pollen days to underpin an alert system that would allow patients to take timely precautionary measures. We developed and validated two prediction models that take historical pollen and weather data as their input to predict the start date and peak date of the pollen season in Islamabad, the capital city of Pakistan. The first model is based on linear regression and the second one is based on phenological modelling. We tested our models on an original and comprehensive dataset from Islamabad. The mean absolute errors (MAEs) for the start day are 2.3 and 3.7 days for the linear and phenological models, respectively, while for the peak day, the MAEs are 3.3 and 4.0 days, respectively. These encouraging results could be used in a website or app to notify patients and healthcare providers to start preparing for the paper mulberry pollen season. Timely action could reduce the burden of symptoms, mitigate the risk of acute attacks and potentially prevent deaths due to acute pollen-induced allergy.

How do author perceptions match up to the outcomes of the peer-review process and perceptions of others? In a top-tier computer science conference (NeurIPS 2021) with more than 23,000 submitting authors and 9,000 submitted papers, we surveyed the authors on three questions: (i) their predicted probability of acceptance for each of their papers, (ii) their perceived ranking of their own papers based on scientific contribution, and (iii) the change in their perception about their own papers after seeing the reviews. The salient results are: (1) Authors had roughly a three-fold overestimate of the acceptance probability of their papers: The median prediction was 70% for an approximately 25% acceptance rate. (2) Female authors exhibited a marginally higher (statistically significant) miscalibration than male authors; predictions of authors invited to serve as meta-reviewers or reviewers were similarly calibrated, but better than authors who were not invited to review. (3) Authors' relative ranking of scientific contribution of two submissions they made generally agreed with their predicted acceptance probabilities (93% agreement), but there was a notable 7% responses where authors predicted a worse outcome for their better paper. (4) The author-provided rankings disagreed with the peer-review decisions about a third of the time; when co-authors ranked their jointly authored papers, co-authors disagreed at a similar rate-about a third of the time. (5) At least 30% of respondents of both accepted and rejected papers said that their perception of their own paper improved after the review process. The stakeholders in peer review should take these findings into account in setting their expectations from peer review.

IntroductionIn current neuroimaging studies, the mainstream practice is to report results corrected for multiple comparisons to control for false positives. In 2009, Lieberman and Cunningham published a highly cited report that promotes the use of uncorrected statistical thresholds to balance Types I and II error rates. This paper aims to review recent studies that cited this report, investigating whether the citations were to justify the use of uncorrected statistical thresholds, and if their uncorrected thresholds adhered to the recommended defaults.MethodsThe Web of Science Core Collection online database was queried to identify original articles published during 2019-2022 that cited the report.ResultsIt was found that the majority of the citing papers (152/225, 67.6%) used the citation to justify their statistical threshold setting. However, only 19.7% of these 152 papers strictly followed the recommended uncorrected P (Punc) < 0.005, k = 10 (15/152, 9.9%) or Punc < 0.005, k = 20 (15/152, 9.9%). Over half (78/152, 51.3%) used various cluster-extent based thresholds with Punc, with the predominant choices being Punc < 0.001, k = 50 and Punc < 0.001, k = 10, mostly without justifying their deviation from the default. Few papers matched the voxel size and smoothing kernel size used by the simulations from the report to derive the recommended thresholds.ConclusionThis survey reveals a disconnect between the use and citation of Lieberman and Cunningham's report. Future studies should justify their chosen statistical thresholds based on rigorous statistical theory and study-specific parameters, rather than merely citing previous works. Furthermore, this paper encourages the neuroimaging community to publicly share their group-level statistical images and metadata to promote transparency and collaboration.

ObjectivesThe purpose of our study was to determine the order in which science and health researchers read scientific papers, their reasons for doing so and the perceived difficulty and perceived importance of each section.Study design and settingAn online survey open to science and health academics and researchers distributed via existing research networks, X (formerly Twitter), and LinkedIn.ResultsAlmost 90% of respondents self-declared to be experienced in reading research papers. 98.6% of the sample read the abstract first because it provides an overview of the paper and facilitates a decision on continuing to read on or not. Seventy-five percent perceived it to be the easiest to read and 62.4% perceived it to be very important (highest rank on a 5-point Likert scale). The majority of respondents did not read a paper in the IMRAD (Introduction, Methods, Results And Discussion) format. Perceived difficulty and perceived importance influenced reading order.ConclusionScience and health researchers do not typically read scientific and health research papers in IMRAD format. The more important a respondent perceives a section to be, the more likely they are to read it. The easier a section is perceived, the more likely it will be read. We present recommendations to those teaching the skill of writing scientific papers and reports.

The research-to-practice gap is a well-known phenomenon. The adoption of evidence into clinical practice needs to consider the complexity of the health care system and a multitude of contextual issues. Research evidence is usually a form of extrinsic motivation for practice change, but works best when it aligns with the intrinsic values of the system and the people in it. Health professionals tend to refer to internal, local policies, information sources and procedures more than external academic research evidence. This protocol paper describes a mixed-methods study with a quasi-experimental design that seeks to investigate how involvement in research might impact the uptake or implementation of recommendations arising from that research. Research evidence for the effectiveness and cost-effectiveness of mobilisation alarms for falls prevention will be disseminated at 36 hospital wards in Victoria, Australia. Eighteen of these wards will be sites where this research evidence was generated; another 18 wards will not have been involved in evidence generation. The uptake of research evidence will be measured across three time points using quantitative and qualitative data. Trial registration: This study has been registered with the Australian New Zealand Clinical Trials Registry: ACTRN12621000823875p.

Threatened shark species are caught in large numbers by artisanal and commercial fisheries and traded globally. Monitoring both which shark species are caught and sold in fisheries, and the export of CITES-restricted products, are essential in reducing illegal fishing. Current methods for species identification rely on visual examination by experts or DNA barcoding techniques requiring specialist laboratory facilities and trained personnel. The need for specialist equipment and/or input from experts means many markets are currently not monitored. We have developed a paper-based Lab-on-a-Chip (LOC) to facilitate identification of three threatened and CITES-listed sharks, bigeye thresher (Alopias superciliosus), pelagic thresher (A. pelagicus) and shortfin mako shark (Isurus oxyrinchus) at market source. DNA was successfully extracted from shark meat and fin samples and combined with DNA amplification and visualisation using Loop Mediated Isothermal Amplification (LAMP) on the LOC. This resulted in the successful identification of the target species of sharks in under an hour, with a working positive and negative control. The LOC provided a simple "yes" or "no" result via a colour change from pink to yellow when one of the target species was present. The LOC serves as proof-of-concept (PoC) for field-based species identification as it does not require specialist facilities. It can be used by non-scientifically trained personnel, especially in areas where there are suspected high frequencies of mislabelling or for the identification of dried shark fins in seizures.

This study presents a comprehensive exploration of topic modeling methods tailored for large language model (LLM) using data obtained from Web of Science and LexisNexis from June 1, 2020, to December 31, 2023. The data collection process involved queries focusing on LLMs, including "Large language model," "LLM," and "ChatGPT." Various topic modeling approaches were evaluated based on performance metrics, including diversity and coherence. latent Dirichlet allocation (LDA), nonnegative matrix factorization (NMF), combined topic models (CTM), and bidirectional encoder representations from Transformers topic (BERTopic) were employed for performance evaluation. Evaluation metrics were computed across platforms, with BERTopic demonstrating superior performance in diversity and coherence across both LexisNexis and Web of Science. The experiment result reveals that news articles maintain a balanced coverage across various topics and mainly focus on efforts to utilize LLM in specialized domains. Conversely, research papers are more concise and concentrated on the technology itself, emphasizing technical aspects. Through the insights gained in this study, it becomes possible to investigate the future path and the challenges that LLMs should tackle. Additionally, they could offer considerable value to enterprises that utilize LLMs to deliver services.

Hardness is one of the basic parameters of water, and a high-level hardness of drinking water may be harmful to human health. Thus, it is very important to monitor drinking water hardness. In this work, a portable lateral flow distance-based paper sensor for the semi-quantitative detection of drinking water hardness is demonstrated. In the presence of Ca2+/Mg2+, the hydrogel can be formed via the chelation between sodium alginate and Ca2+/Mg2+, inducing a phase separation process. The viscosity change of the sodium alginate solution is directly related to the Ca2+/Mg2+ concentration and can be determined by the water lateral flow distance on test strips. The sensor successfully realizes the quantification of Ca2+ and Mg2+ in the range of 0-10 mmol L-1 and 4-20 mmol L-1, respectively. The recoveries are found varied from 95% to 108.9%. The water hardness is acceptable for drinking if the Cr values lies in the range of 0.259 to 0.419, and it is high with the Cr value above 0.595. Remarkably, the performance of the sensor is comparable with the commercial kit for real water samples, which avoids the subjective judgment. Overall, this method provides a portable approach for semi-quantitative detection of drinking water hardness with the merits of convenience and low cost, which shows great potential for the potential application.

[This corrects the article DOI: 10.1371/journal.pone.0279834.].

While research has suggested that addressing multiple needs simultaneously may increase the chances for positive labor force outcomes, few studies have explored a multi-pronged approach to assist individuals with jumping off the benefits cliff. The purpose of the current study is to explore the potential of a Career Pathway program designed to supplement benefits for those who "jump off the benefits cliff." This study will employ qualitative impact assessment protocol (QuIP) and observational methods to assess the implementation of the career pathway program through (1) observation, (2) focus groups with service providers and program stakeholders, and (3) semi-structured interviews with program participants. Qualitative thematic analysis will be employed to analyze responses disaggregated by the various service providers and program participants. Codes and themes generated from the analyses will be compared both within the groups of service providers and participants and between the groups.

Anti-neutrophil cytoplasmic antibody (ANCA) associated vasculitis (AAV) is a chronic, relapsing-remitting condition associated with increased morbidity. Previous research has shown patients with AAV report high levels of fatigue, pain, depression and anxiety. Over recent years successful work has been carried out to improve clinical outcomes, resulting in reduced mortality and end stage kidney disease (ESKD). Despite this, little work has been done to better understand the role of the patient within this condition. The prevalence of AAV is increasing and to date, there is a shortage of specific tools that assess and measure key features relating to patient reported outcomes (PROs). This protocol details how we can better understand the lived experiences of those with AAV through the development of a disease specific, patient reported outcome measure (PROM), to be used in clinic practice. This will allow us to recognise and validate PROs and the impact the disease and its treatment has on patients' health related quality of life (HRQoL). In addition, we aim to identify potential differences in PRO's between demographics, organ involvement and treatment subgroups in AAV as well as outcomes relating to the patient experience. Patients from a single centre in the UK will be recruited to take part in the exploratory qualitative study which will include focus groups and semi-structured interviews. The inclusion criteria comprise anyone with a diagnosis of AAV and willing to participate, including those who have active or relapsing disease, those are economically active, unemployed, retired and patients receiving renal replacement therapy. The aim of the project is to identify key issues patients experience in relation to their disease and its management and how these can be better assessed in a new PROM developed for use in the clinic setting. This will enable better delivery of individualised care and inform shared decision making, while also serving as a platform for future research looking at PROs in other glomerulonephritides.

BackgroundGlobal evidence on psychosis is dominated by studies conducted in Western, high-income countries. The objectives of the Study of Context Of Psychoses to improve outcomes in Ethiopia (SCOPE) are (1) to generate rigorous evidence of psychosis experience, epidemiology and impacts in Ethiopia that will illuminate aetiological understanding and (2) inform development and testing of interventions for earlier identification and improved first contact care that are scalable, inclusive of difficult-to-reach populations and optimise recovery.MethodsThe setting is sub-cities of Addis Ababa and rural districts in south-central Ethiopia covering 1.1 million people and including rural, urban and homeless populations. SCOPE comprises (1) formative work to understand care pathways and community resources (resource mapping); examine family context and communication (ethnography); develop valid measures of family communication and personal recovery; and establish platforms for community engagement and involvement of people with lived experience; (2a) a population-based incidence study, (2b) a case-control study and (2c) a cohort study with 12 months follow-up involving 440 people with psychosis (390 rural/Addis Ababa; 50 who are homeless), 390 relatives and 390 controls. We will test hypotheses about incidence rates in rural vs. urban populations and men vs. women; potential aetiological role of khat (a commonly chewed plant with amphetamine-like properties) and traumatic exposures in psychosis; determine profiles of needs at first contact and predictors of outcome; (3) participatory workshops to develop programme theory and inform co-development of interventions, and (4) evaluation of the impact of early identification strategies on engagement with care (interrupted time series study). Findings will inform development of (5) a protocol for (5a) a feasibility cluster randomised controlled trial of interventions for people with recent-onset psychosis in rural settings and (5b) two uncontrolled pilot studies to test acceptability, feasibility of co-developed interventions in urban and homeless populations.

[This corrects the article DOI: 10.1371/journal.pone.0292261.].

How the role of dopamine differs according to the evolution of eusociality and how it is required in the flexible society of Polistes paper wasps need further clarification. In the present study, we compared the storage and usage of dopamine-related substances in brains between the castes of paper wasps. The head widths, lipid stores in the abdomen, and levels of biogenic amines in the brains were measured in newly emerged females before male emergence (workers) and after male emergence (gynes) in four Polistes species. The head widths and the lipid stores were significantly larger in gynes than workers in P. snelleni, P. rothneyi, and P. jokahamae, whereas they did not differ between castes in P. chinensis. The levels of dopamine precursors in the brains were significantly higher in gynes than workers in P. snelleni, P. chinensis, and P. rothneyi, whereas those of dopamine and its metabolites did not differ between castes in these species. In P. jokahamae, the levels of dopamine precursors and dopamine in the brains did not differ between castes, but those of a dopamine metabolite were significantly higher in gynes than workers. Thus, the caste differences in the levels of dopamine-related substances did not always match body sizes and nutritional reserves. Foundresses in P. rothneyi had significantly lower levels of dopamine precursors and higher levels of dopamine and its metabolite than newly emerged gynes. These results suggested that in several Polistes species, dopamine precursors were stored in the brain without dopamine biosynthesis at emergence, and then converted into dopamine in foundresses during colony founding. These neuroendocrinal states in Polistes species largely differed from those in eusocial bees.

How the role of dopamine differs according to the evolution of eusociality and how it is required in the flexible society of Polistes paper wasps need further clarification. In the present study, we compared the storage and usage of dopamine-related substances in brains between the castes of paper wasps. The head widths, lipid stores in the abdomen, and levels of biogenic amines in the brains were measured in newly emerged females before male emergence (workers) and after male emergence (gynes) in four Polistes species. The head widths and the lipid stores were significantly larger in gynes than workers in P. snelleni, P. rothneyi, and P. jokahamae, whereas they did not differ between castes in P. chinensis. The levels of dopamine precursors in the brains were significantly higher in gynes than workers in P. snelleni, P. chinensis, and P. rothneyi, whereas those of dopamine and its metabolites did not differ between castes in these species. In P. jokahamae, the levels of dopamine precursors and dopamine in the brains did not differ between castes, but those of a dopamine metabolite were significantly higher in gynes than workers. Thus, the caste differences in the levels of dopamine-related substances did not always match body sizes and nutritional reserves. Foundresses in P. rothneyi had significantly lower levels of dopamine precursors and higher levels of dopamine and its metabolite than newly emerged gynes. These results suggested that in several Polistes species, dopamine precursors were stored in the brain without dopamine biosynthesis at emergence, and then converted into dopamine in foundresses during colony founding. These neuroendocrinal states in Polistes species largely differed from those in eusocial bees.

Invasive paper wasps such as Polistes dominula are a major pest and problem for biodiversity around the globe. Safe and highly targeted methods for the control of these and other social wasp populations are needed. We attempted to identify potentially-lethal gene targets that could be used on adult paper wasps in a gene silencing or RNA interference (RNAi) approach. Double-stranded RNA (dsRNA) was designed to target genes for which silencing has proven lethal in other insects. dsRNA was provided either orally to foragers or directly injected into the wasps. We also provided the dsRNA unprotected or protected from degradation by gut nucleases in two different forms (lipofectamine and carbon quantum dots). The effects of oral delivery of 22 different gene targets to forager wasps was evaluated. The expression of five different genes was successfully reduced following dsRNA ingestion or injection. These gene targets included the FACT complex subunit spt16 (DRE4) and RNA-binding protein fusilli (FUSILLI), both of which have been previously shown to have potential as lethal targets for pest control in other insects. However, we found no evidence of significant increases in adult wasp mortality following ingestion or injection of dsRNA for these genes when compared with control treatments in our experiments. The methods we used to protect the dsRNA from digestive degradation altered gene expression but similarly did not influence wasp mortality. Our results indicate that while many of the same gene targets can be silenced and induce mortality in other insects, dsRNA and RNAi approaches may not be useful for paper wasp control.

In our study, we have empirically studied the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether the assessment of a paper can be influenced by numerical information that act as an anchor (e.g. citation impact). We have undertaken a survey of corresponding authors with an available email address in the Web of Science database. The authors were asked to assess the quality of papers that they cited in previous papers. Some authors were assigned to three treatment groups that receive further information alongside the cited paper: citation impact information, information on the publishing journal (journal impact factor) or a numerical access code to enter the survey. The control group did not receive any further numerical information. We are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation impact or journal impact), but also by numbers that are not related to quality, i.e. the access code. Our results show that the quality assessments of papers seem to depend on the citation impact information of single papers. The other information (anchors) such as an arbitrary number (an access code) and journal impact information did not play a (important) role in the assessments of papers. The results point to a possible anchoring bias caused by insufficient adjustment: it seems that the respondents assessed cited papers in another way when they observed paper impact values in the survey. We conclude that initiatives aiming at reducing the use of journal impact information in research evaluation either were already successful or overestimated the influence of this information.

Bisphenol A (BPA) is an industrial chemical that is widely used in various industrial applications. It has concerns in its use as a color developer in thermal paper receipts since it is identified as an endocrine disruptor and causes hormonal disturbances. In this study, thirty thermal paper receipt samples were randomly collected from various locations in Sharjah, United Arab Emirates and analyzed using high performance liquid chromatography-mass spectrometry. Sixty percent (60%) of receipt samples showed BPA levels above the acceptable limit (200 ng/mg) set by the European Union (EU) for thermal papers. On the other hand, 40% of the samples reported very low BPA levels (< 0.02 ng/mg). However, estimated weight adjusted daily intakes (EDI) ranged between 8.22 ×10-11 and 0.000812 μg/kg bw/day for the general population, and between 7.89×10-9 and 0.0681 μg/kg bw/day for the occupationally exposed cashiers. Thus, all calculated EDIs were below the European Food Safety Authority Tolerable Daily Intake (4 μg/kg·bw/day) and the provisional Health Canada Tolerable Daily Intake (25 ug/kg bw/day) under varying paper-to-skin transfer coefficients and absorption fractions. Nevertheless, due to its health effects and recent legal restrictions by EU, the occurrence of co-exposure to dietary and non-dietary sources should be considered in the health risk assessment of Bisphenol A, mainly for people with frequent occupational exposure to thermal paper, and especially with the increased use of sanitizers. The current study is a first within the UAE context in relation to BPA in thermal paper receipts, thus its significance especially with the recent EU enforcement of BPA limits in paper receipts. The study highlights that proper policies as well as education and awareness may assist in limiting transdermal BPA exposure for the general and occupationally exposed populations.

Women are under-represented among authors of scientific papers. Although the number of retractions has been rising over the past few decades, gender differences among authors of retracted papers remain poorly understood. Therefore, this study investigated gender differences in authorship of retracted papers in biomedical sciences available on RetractionWatch. Among 35,635 biomedical articles retracted between 1970 and 2022, including 20,849 first authors and 20,413 last authors, women accounted for 27.4% [26.8 to 28.0] of first authors and 23.5% [22.9 to 24.1] of last authors. The lowest representation of women was found for fraud (18.9% [17.1 to 20.9] for first authors and 13.5% [11.9 to 15.1] for last authors) and misconduct (19.5% [17.3 to 21.9] for first authors and 17.8% [15.7 to 20.3] for last authors). Women's representation was the highest for issues related to editors and publishers (35.1% [32.2 to 38.0] for first authors and 24.8% [22.9 to 26.8] for last authors) and errors (29.5% [28.0 to 31.0] for first authors and 22.1% [20.7 to 23.4] for last authors). Most retractions (60.9%) had men as first and last authors. Gender equality could improve research integrity in biomedical sciences.

Reading is considered a non-intuitive, cognitively demanding ability requiring synchronization between several neural networks supporting visual, language processing and higher-order abilities. With the involvement of technology in our everyday life, reading from a screen has become widely used. Several studies point to challenges in processing written materials from the screen due to changes in attention allocation when reading from a screen compared to reading from a printed paper. The current study examined the differences in brain activation when reading from a screen compared to reading from a printed paper focusing on spectral power related to attention in fifteen 6-8-year-old children. Using an electroencephalogram, children read two different age-appropriate texts, without illustrations, presented randomly on the screen and on a printed paper. Data were analyzed using spectral analyses in brain regions related to language, visual processing, and cognitive control, focusing on theta vs. beta waveforms. Results indicated that while reading from a printed paper was accompanied by higher energy in high-frequency bands (beta, gamma), reading from the screen was manifested by a higher power in the lower frequency bands (alpha, theta). Higher theta compared to the beta ratio, representing challenges in allocating attention to a given task, was found for the screen reading compared to the printed paper reading condition. Also, a significant negative correlation was found between differences in theta/beta ratio for screen vs paper reading and accuracy level in the age-normalized Sky-Search task measuring attention and a positive correlation with performance time. These results provide neurobiological support for the greater cognitive load and reduced focused attention during screen-based compared to print-based reading and suggest a different reliance on attention resources for the two conditions in children.

ContextThe retraction of research papers, for whatever reason, is a growing phenomenon. However, although retracted paper information is publicly available via publishers, it is somewhat distributed and inconsistent.ObjectiveThe aim is to assess: (i) the extent and nature of retracted research in Computer Science (CS) (ii) the post-retraction citation behaviour of retracted works and (iii) the potential impact upon systematic reviews and mapping studies.MethodWe analyse the Retraction Watch database and take citation information from the Web of Science and Google scholar.ResultsWe find that of the 33,955 entries in the Retraction watch database (16 May 2022), 2,816 are classified as CS, i.e., ≈ 8%. For CS, 56% of retracted papers provide little or no information as to the reasons. This contrasts with 26% for other disciplines. There is also some disparity between different publishers, a tendency for multiple versions of a retracted paper to be available beyond the Version of Record (VoR), and for new citations long after a paper is officially retracted (median = 3; maximum = 18). Systematic reviews are also impacted with ≈ 30% of the retracted papers having one or more citations from a review.ConclusionsUnfortunately, retraction seems to be a sufficiently common outcome for a scientific paper that we as a research community need to take it more seriously, e.g., standardising procedures and taxonomies across publishers and the provision of appropriate research tools. Finally, we recommend particular caution when undertaking secondary analyses and meta-analyses which are at risk of becoming contaminated by these problem primary studies.

In the first half of 2023, text-generative artificial intelligence (AI), including ChatGPT from OpenAI, has attracted considerable attention worldwide. In this study, first, we compared Japanese stylometric features of texts generated by ChatGPT, equipped with GPT-3.5 and GPT-4, and those written by humans. In this work, we performed multi-dimensional scaling (MDS) to confirm the distributions of 216 texts of three classes (72 academic papers written by 36 single authors, 72 texts generated by GPT-3.5, and 72 texts generated by GPT-4 on the basis of the titles of the aforementioned papers) focusing on the following stylometric features: (1) bigrams of parts-of-speech, (2) bigram of postpositional particle words, (3) positioning of commas, and (4) rate of function words. MDS revealed distinct distributions at each stylometric feature of GPT (3.5 and 4) and human. Although GPT-4 is more powerful than GPT-3.5 because it has more parameters, both GPT (3.5 and 4) distributions are overlapping. These results indicate that although the number of parameters may increase in the future, GPT-generated texts may not be close to that written by humans in terms of stylometric features. Second, we verified the classification performance of random forest (RF) classifier for two classes (GPT and human) focusing on Japanese stylometric features. This study revealed the high performance of RF in each stylometric feature: The RF classifier focusing on the rate of function words achieved 98.1% accuracy. Furthermore the RF classifier focusing on all stylometric features reached 100% in terms of all performance indexes (accuracy, recall, precision, and F1 score). This study concluded that at this stage we human discriminate ChatGPT from human limited to Japanese language.

Postures at work are paramount in ergonomics. They can be determined using observation and inclinometry in a variety of measurement scenarios that may differ both in costs associated with collecting and processing data, and in efficiency, i.e. the precision of the eventual outcome. The trade-off between cost and efficiency has rarely been addressed in research despite the obvious interest of obtaining precise data at low costs. Median trunk and upper arm inclination were determined for full shifts in 28 paper mill workers using both observation and inclinometry. Costs were estimated using comprehensive cost equations; and efficiency, i.e. the inverted standard deviation of the group mean, was assessed on basis of exposure variance components. Cost and efficiency were estimated in simulations of six sampling scenarios: two for inclinometry (sampling from one or three shifts) and four for observation (one or three observers rating one or three shifts). Each of the six scenarios was evaluated for 1 through 50 workers. Cost-efficiency relationships between the scenarios were intricate. As an example, inclinometry was always more cost-efficient than observation for trunk inclination, except for observation strategies involving only few workers; while for arm inclination, observation by three observers of one shift per worker outperformed inclinometry on three shifts up to a budget of €20000, after which inclinometry prevailed. At a budget of €10000, the best sampling scenario for arm inclination was 2.5 times more efficient than the worst. Arm inclination could be determined with better cost-efficiency than trunk inclination. Our study illustrates that the cost-efficiency of different posture measurement strategies can be assessed and compared using easily accessible diagrams. While the numeric examples in our study are specific to the investigated occupation, exposure variables, and sampling logistics, we believe that inclinometry will, in general, outperform observation. In any specific case, we recommend a thorough analysis, using the comparison procedure proposed in the present study, of feasible strategies for obtaining data, in order to arrive at an informed decision support.

Although regression models play a central role in the analysis of medical research projects, there still exist many misconceptions on various aspects of modeling leading to faulty analyses. Indeed, the rapidly developing statistical methodology and its recent advances in regression modeling do not seem to be adequately reflected in many medical publications. This problem of knowledge transfer from statistical research to application was identified by some medical journals, which have published series of statistical tutorials and (shorter) papers mainly addressing medical researchers. The aim of this review was to assess the current level of knowledge with regard to regression modeling contained in such statistical papers. We searched for target series by a request to international statistical experts. We identified 23 series including 57 topic-relevant articles. Within each article, two independent raters analyzed the content by investigating 44 predefined aspects on regression modeling. We assessed to what extent the aspects were explained and if examples, software advices, and recommendations for or against specific methods were given. Most series (21/23) included at least one article on multivariable regression. Logistic regression was the most frequently described regression type (19/23), followed by linear regression (18/23), Cox regression and survival models (12/23) and Poisson regression (3/23). Most general aspects on regression modeling, e.g. model assumptions, reporting and interpretation of regression results, were covered. We did not find many misconceptions or misleading recommendations, but we identified relevant gaps, in particular with respect to addressing nonlinear effects of continuous predictors, model specification and variable selection. Specific recommendations on software were rarely given. Statistical guidance should be developed for nonlinear effects, model specification and variable selection to better support medical researchers who perform or interpret regression analyses.

Although regression models play a central role in the analysis of medical research projects, there still exist many misconceptions on various aspects of modeling leading to faulty analyses. Indeed, the rapidly developing statistical methodology and its recent advances in regression modeling do not seem to be adequately reflected in many medical publications. This problem of knowledge transfer from statistical research to application was identified by some medical journals, which have published series of statistical tutorials and (shorter) papers mainly addressing medical researchers. The aim of this review was to assess the current level of knowledge with regard to regression modeling contained in such statistical papers. We searched for target series by a request to international statistical experts. We identified 23 series including 57 topic-relevant articles. Within each article, two independent raters analyzed the content by investigating 44 predefined aspects on regression modeling. We assessed to what extent the aspects were explained and if examples, software advices, and recommendations for or against specific methods were given. Most series (21/23) included at least one article on multivariable regression. Logistic regression was the most frequently described regression type (19/23), followed by linear regression (18/23), Cox regression and survival models (12/23) and Poisson regression (3/23). Most general aspects on regression modeling, e.g. model assumptions, reporting and interpretation of regression results, were covered. We did not find many misconceptions or misleading recommendations, but we identified relevant gaps, in particular with respect to addressing nonlinear effects of continuous predictors, model specification and variable selection. Specific recommendations on software were rarely given. Statistical guidance should be developed for nonlinear effects, model specification and variable selection to better support medical researchers who perform or interpret regression analyses.

As social issues like climate change become increasingly salient, digital traces left by scholarly documents can be used to assess their reach outside of academia. Our research examine who shared climate change research papers on Twitter by looking at the expressions used in profile descriptions. We categorized users in eight categories (academia, communication, political, professional, personal, organization, bots and publishers) associated to specific expressions. Results indicate how diverse publics may be represented in the communication of scholarly documents on Twitter. Supplementing our word detection analysis with qualitative assessments of the results, we highlight how the presence of unique or multiple categorizations in textual Twitter descriptions provides evidence of the publics of research in specific contexts. Our results show a more substantial communication by academics and organizations for papers published in 2016, whereas the general public comparatively participated more in 2015. Overall, there is significant participation of publics outside of academia in the communication of climate change research articles on Twitter, although the extent to which these publics participate varies between individual papers. This means that papers circulate in specific communities which need to be assessed to understand the reach of research on social media. Furthermore, the flexibility of our method provide means for research assessment that consider the contextuality and plurality of publics involved on Twitter.

As social issues like climate change become increasingly salient, digital traces left by scholarly documents can be used to assess their reach outside of academia. Our research examine who shared climate change research papers on Twitter by looking at the expressions used in profile descriptions. We categorized users in eight categories (academia, communication, political, professional, personal, organization, bots and publishers) associated to specific expressions. Results indicate how diverse publics may be represented in the communication of scholarly documents on Twitter. Supplementing our word detection analysis with qualitative assessments of the results, we highlight how the presence of unique or multiple categorizations in textual Twitter descriptions provides evidence of the publics of research in specific contexts. Our results show a more substantial communication by academics and organizations for papers published in 2016, whereas the general public comparatively participated more in 2015. Overall, there is significant participation of publics outside of academia in the communication of climate change research articles on Twitter, although the extent to which these publics participate varies between individual papers. This means that papers circulate in specific communities which need to be assessed to understand the reach of research on social media. Furthermore, the flexibility of our method provide means for research assessment that consider the contextuality and plurality of publics involved on Twitter.

We propose a stochastic generative model to represent a directed graph constructed by citations among academic papers, where nodes and directed edges represent papers with discrete publication time and citations respectively. The proposed model assumes that a citation between two papers occurs with a probability based on the type of the citing paper, the importance of cited paper, and the difference between their publication times, like the existing models. We consider the out-degrees of citing paper as its type, because, for example, survey paper cites many papers. We approximate the importance of a cited paper by its in-degrees. In our model, we adopt three functions: a logistic function for illustrating the numbers of papers published in discrete time, an inverse Gaussian probability distribution function to express the aging effect based on the difference between publication times, and an exponential distribution (or a generalized Pareto distribution) for describing the out-degree distribution. We consider that our model is a more reasonable and appropriate stochastic model than other existing models and can perform complete simulations without using original data. In this paper, we first use the Web of Science database and see the features used in our model. By using the proposed model, we can generate simulated graphs and demonstrate that they are similar to the original data concerning the in- and out-degree distributions, and node triangle participation. In addition, we analyze two other citation networks derived from physics papers in the arXiv database and verify the effectiveness of the model.

DNA extraction, a vital pre-requisite for most biological studies, continues to be studied extensively. According to some studies, DNA shows a certain degree of absorbability on filter paper made of plant fiber-based adsorbent material. However, the principle underlying such specific adsorption as well as plant species associated with plant fiber-based adsorbents and optimized extraction conditions have not yet been studied. This study demonstrates the tight correlation between crystallinity and hygroscopicity in plant fiber-based adsorbents used for DNA extraction and proposes the concept of DNA adsorption on plant fiber-based adsorbents, for the first time. We also explored optimal extracting and eluting conditions and developed a novel plant fiber-based DNA extraction method that was quadruple times more powerful than current approaches. Starting with the screening of various types of earthed plant fiber-based adsorbents, we went on to mine new plant fiber-based adsorbents, bamboo paper and degreased cotton, and succeeded in increasing their efficiency of DNA extraction to 4.2 times than that of current approaches. We found a very strong correlation between the crystallinity and hygroscopicity of plant fiber-based adsorbents which showed efficiency for DNA extraction, and thus propose a principle that potentially governs such specific adsorption processes, in the hope that this information may guide related multidisciplinary research studies in the future. Nanodrop, electrophoresis and PCR were selected to demonstrate the quantity, quality, integrity and utility of the extracted DNA. Furthermore, crystallinity, hygroscopicity, pore size distribution and composition of plant fiber-based adsorbents were studied to explore their correlation in an attempt to understand the principle underlying this particular type of adsorption. The findings of this study may be further extended to the extraction of other types of nucleic acids with similar biochemical properties.

IntroductionLiterature is lacking on the safety of storing contaminated PPE in paper bags for reuse, potentially increasing exposure to frontline healthcare workers (HCW) and patients. The aim of this study is to evaluate the effectiveness of paper bags as a barrier for fomite transmission of SARS-CoV-2 by storing face masks, respirators, and face shields.MethodsThis quasi-experimental study evaluated the presence of SARS-CoV-2 on the interior and exterior surfaces of paper bags containing PPE that had aerosolized exposures in clinical and simulated settings. Between May and October 2020, 30 unique PPE items were collected from COVID-19 units at two urban hospitals. Exposed PPE, worn by either an infected patient or HCW during a SARS-CoV-2 aerosolizing event, were placed into an unused paper bag. Samples were tested at 30-minute and 12-hour intervals.ResultsA total of 177 swabs were processed from 30 PPE samples. We found a 6.8% positivity rate among all samples across both collection sites. Highest positivity rates were associated with ventilator disconnection and exposure to respiratory droplets from coughing. Positivity rates differed between hospital units. Total positivity rates were similar between 30-minute (6.7%) and 12-hour (6.9%) sample testing time intervals. Control samples exposed to inactivated SARS-CoV-2 droplets had higher total viral counts than samples exposed to nebulized aerosols.ConclusionsData suggests paper bags are not a significant fomite risk for SARS-CoV-2 transmission. However, controls demonstrated a risk with droplet exposure. Data can inform guidelines for storing and re-using PPE in situations of limited supplies during future pandemics.

Nucleic acid amplification is a sensitive and powerful tool for allergen detection. However, it is limited due to the relatively cumbersome methods required to extract nucleic acids from single plant seed allergen (e.g. peanut and soybean). In view of this, an approach of extracting nucleic acid with untreated glass-fiber paper (paper-based microfluidics) was applied for nucleic acid capture and purification from plant seed allergen and commercial products. After cut by hollow cylindrical cutter, a certain size the paper chip it used to absorb DNA. And this paper-based microfluidics with DNA was directly applied for amplification by loop-mediated isothermal amplification (LAMP). To evaluate the adsorption performance of paper chip to DNA, CTAB and SDS method were used as comparisons. From amplification results, the established technique has good specificity, high repeatability (C.V. values are 4.41% and 6.17% for peanut and soybean) and favorable sensitivity (7.39 ng/μL or peanut and 6.6 ng/μL for soybean), and successfully used for commercial products (2 kinds of candy and 2 kinds of cakes containing peanut, and 2 kinds of drinks, candy and 2 kinds of biscuits containing soybean). This speed and flexible detection method makes it suit for applications in point-of-care (POC) detection at different scenario, such as custom house and import port.

Some macroalgae drift on the ocean and are stranded on coasts, and these stranded brown macroalgae are regarded to be degraded by organisms. Alginate is a major component of brown macroalgae. An uncovering of how carbon is cycled through brown macroalgae is needed to deeply understand coastal ecosystems. In this study, to gain insights into metabolism of brown macroalgae and alginate in the organisms, we initially confirmed that supralittoral talitrid amphipods (beach fleas or sandhoppers collected on the Shibagaki coast in Ishikawa Prefecture, Japan) fed on the brown macroalgae. We then isolated bacteria such as Vibrio sp. with alginate-assimilating capability from the gut of the amphipods. Metagenomic analysis of the gut of amphipods housed in several conditions (e.g. macroalgae or paper as feed, non-sterilized or sterilized environment) showed no condition-dependent compositions of bacteria and fungi, but Vibrio sp. were detected at high frequency, in good agreement with the isolation of Vibrio sp. An intervention study using antibiotics showed that amphipods fed on algae or paper at about the same rate in the presence or absence of antibiotics, and that the antibiotics had no effects on the life span. Moreover, intervention with antibiotics completely killed Vibrio sp. and some other bacteria, and had significant effects on the composition of the flora in the gut, with elimination of the variations observed in the guts of amphipods housed without antibiotics. These data suggest that microbes that were killed by antibiotics, including Vibrio sp., in the gut of talitrid amphipods are not essential for assimilation of brown macroalgae.

IntroductionMore people are living with and beyond a cancer diagnosis. There is limited understanding of the long-term effects of cancer and cancer treatment on quality of life and personal and household finances when compared to people without cancer. In a separate protocol we have proposed to link de-identified data from electronic primary care and hospital records for a large population of cancer survivors and matched controls. In this current protocol, we propose the linkage of Patient Reported Outcomes Measures data to the above data for a subset of this population. The aim of this study is to investigate the full impact of living with and beyond a cancer diagnosis compared to age and gender matched controls. A secondary aim is to test the feasibility of the collection of Patient Reported Outcomes Measures (PROMS) data and the linkage procedures of the PROMs data to electronic health records data.Materials and methodsThis is a cross-sectional study, aiming to recruit participants treated at the Leeds Teaching Hospitals National Health Service Trust. Eligible patients will be cancer survivors at around 5 years post-diagnosis (breast, colorectal and ovarian cancer) and non-cancer patient matched controls attending dermatology out-patient clinics. They will be identified by running a query on the Leeds Teaching Hospitals Trust patient records system. Approximately 6000 patients (2000 cases and 4000 controls) will be invited to participate via post. Participants will be invited to complete PROMs assessing factors such as quality of life and finances, which can be completed on paper or online (surveys includes established instruments, and bespoke instruments (demographics, financial costs). This PROMs data will then be linked to routinely collected de-identified data from patient's electronic primary care and hospital records.DiscussionThis innovative work aims to create a truly 'comprehensive patient record' to provide a broad picture of what happens to cancer patients across their cancer pathway, and the long-term impact of cancer treatment. Comparisons can be made between the cases and controls, to identify the aspects of life that has had the greatest impact following a cancer diagnosis. The feasibility of linking PROMs data to electronic health records can also be assessed. This work can inform future support offered to people living with and beyond a cancer diagnosis, clinical practice, and future research methodologies.

Introduction More people are living with and beyond a cancer diagnosis. There is limited understanding of the long-term effects of cancer and cancer treatment on quality of life and personal and household finances when compared to people without cancer. In a separate protocol we have proposed to link de-identified data from electronic primary care and hospital records for a large population of cancer survivors and matched controls. In this current protocol, we propose the linkage of Patient Reported Outcomes Measures data to the above data for a subset of this population. The aim of this study is to investigate the full impact of living with and beyond a cancer diagnosis compared to age and gender matched controls. A secondary aim is to test the feasibility of the collection of Patient Reported Outcomes Measures (PROMS) data and the linkage procedures of the PROMs data to electronic health records data. Materials and methods This is a cross-sectional study, aiming to recruit participants treated at the Leeds Teaching Hospitals National Health Service Trust. Eligible patients will be cancer survivors at around 5 years post-diagnosis (breast, colorectal and ovarian cancer) and non-cancer patient matched controls attending dermatology out-patient clinics. They will be identified by running a query on the Leeds Teaching Hospitals Trust patient records system. Approximately 6000 patients (2000 cases and 4000 controls) will be invited to participate via post. Participants will be invited to complete PROMs assessing factors such as quality of life and finances, which can be completed on paper or online (surveys includes established instruments, and bespoke instruments (demographics, financial costs). This PROMs data will then be linked to routinely collected de-identified data from patient’s electronic primary care and hospital records. Discussion This innovative work aims to create a truly ‘comprehensive patient record’ to provide a broad picture of what happens to cancer patients across their cancer pathway, and the long-term impact of cancer treatment. Comparisons can be made between the cases and controls, to identify the aspects of life that has had the greatest impact following a cancer diagnosis. The feasibility of linking PROMs data to electronic health records can also be assessed. This work can inform future support offered to people living with and beyond a cancer diagnosis, clinical practice, and future research methodologies.

Background Promoting physical activity (PA) for university students is essential as PA levels decrease during the transition from secondary to higher education. Providing technology-supported university courses targeting students’ PA levels may be a viable option to combat the problem. However, it is still unclear how and what technologies should be implemented in university courses to promote PA. This study aims to create a series of design principles for technology-supported physical education courses that aim to increase university students’ PA knowledge, motivation and levels. Method The proposed methodology underpinning the research program is a seven-phase design-based research (DBR) approach, with the seven phases encompassed in four sequential studies. These four studies are a systematic review, a qualitative focus group study, a pilot study, and a randomised controlled trial (RCT) study. The protocol paper aims to detail the plan for conducting the four studies in a comprehensive and transparent manner, thus contributing to the methodological evidence base in this field. Discussion Design principles generated from this project will contribute to the growing evidence focusing on effective design and implementation features. Future practitioners can also use these to develop physical education courses that aim to promote university students’ physical activity levels, knowledge, and motivation. Trial registration The RCT registry number: ACTRN12622000712707, 18/05/2022.

BackgroundPromoting physical activity (PA) for university students is essential as PA levels decrease during the transition from secondary to higher education. Providing technology-supported university courses targeting students' PA levels may be a viable option to combat the problem. However, it is still unclear how and what technologies should be implemented in university courses to promote PA. This study aims to create a series of design principles for technology-supported physical education courses that aim to increase university students' PA knowledge, motivation and levels.MethodThe proposed methodology underpinning the research program is a seven-phase design-based research (DBR) approach, with the seven phases encompassed in four sequential studies. These four studies are a systematic review, a qualitative focus group study, a pilot study, and a randomised controlled trial (RCT) study. The protocol paper aims to detail the plan for conducting the four studies in a comprehensive and transparent manner, thus contributing to the methodological evidence base in this field.DiscussionDesign principles generated from this project will contribute to the growing evidence focusing on effective design and implementation features. Future practitioners can also use these to develop physical education courses that aim to promote university students' physical activity levels, knowledge, and motivation.Trial registrationThe RCT registry number: ACTRN12622000712707, 18/05/2022.

BackgroundAdvances in medicine and public health mean that people are living longer; however, a significant proportion of that increased lifespan is spent in a prolonged state of declining health and wellbeing which places increasing pressure on medical, health and social services. There is a social and economic need to develop strategies to prevent or delay age-related disease and maintain lifelong health. Several studies have suggested links between the gut microbiome and age-related disease, which if confirmed would present a modifiable target for intervention development. The MOTION study aims to determine whether and how changes in the gut microbiome are associated with physical and mental capacity. A comprehensive longitudinal multiparameter study such as this has not been previously undertaken.MethodsMOTION is a longitudinal prospective cohort study with a focus on gut health and cognitive function. 360 healthy individuals aged 60 years and older, living in East Anglia, UK will be recruited to the study, stratified into one of three risk groups (cohorts) for developing dementia based on their cognitive function. Participants will attend study appointments every six months over four years, providing stool and blood samples and a health questionnaire. Participants will also undergo physical measurements and cognitive tests at alternating appointments, and undergo Optical Coherence Tomography scans at 3 timepoints. Two subgroups of participants in the study will provide colonic tissue biopsies (n = ≥30 from each cohort), and brain imaging (n = 30) at two timepoints.DiscussionThis study will provide new insights into the gut-(microbiota)-brain axis and the relationship between age-associated changes in gut microbe populations and cognitive health. Such insights could help develop new microbe-based strategies to improve lifelong health and wellbeing.Trial registrationThis study is registered in the ClinicalTrials.gov Database with ID: NCT04199195 Registered: May 14, 2019.

Contamination of waterways is of increasing concern, with recent studies demonstrating elevated levels of antibiotics, antidepressants, household, agricultural and industrial chemicals in freshwater systems. Thus, there is a growing demand for methods to rapidly and conveniently monitor contaminants in waterways. Here we demonstrate how a combination of paper microfluidic devices and handheld mobile technology can be used by citizen scientists to carry out a sustained water monitoring campaign. We have developed a paper-based analytical device and a 3 minute sampling workflow that requires no more than a container, a test device and a smartphone app. The contaminant measured in these pilots are phosphates, detectable down to 3 mg L-1. Together these allow volunteers to successfully carry out cost-effective, high frequency, phosphate monitoring over an extended geographies and periods.