Search

Background: Seven per cent of general waste and 20% of healthcare risk waste produced in acute hospitals in Ireland comes from operating theatres. Surgical wrap comprises 11% of operating theatre waste. Aims: The primary aim of this study was to pilot the implementation of a recycling initiative for surgical instrument set wrap in an operating theatre in Ireland. Secondary aims included quantification of the surgical wrap diverted from general waste to recycling streams over a 5-week period and estimation of the annual carbon emissions associated with gynaecology surgical wrap use in Cork. Methods: The amount of polypropylene surgical wrap generated by a single gynaecology theatre at Cork University Maternity Hospital was prospectively quantified from 24/1/22 to 1/3/22. At the end of the study period, individual sheets of polypropylene wrap were counted and dimensions were measured to calculate the total surface area of surgical wrap saved for recycling. Results: A total of 66 surgeries were performed over the 5-week study period. Two hundred twenty-one individual sheets of surgical wrap were collected, equating to 282.1 m2 of polypropylene wrap. An estimated 11,564 m2 of surgical wrap could be recycled annually from the gynaecology theatre service in Cork with an associated annual carbon emissions equivalent of at least 2.2 tonnes of CO2. Conclusion: Diversion of surgical wrap from general waste and clinical waste streams to the recycling stream is achievable in every operating theatre. Small changes to operating theatre waste disposal practices have the potential to yield significant reductions to theatre waste outputs and to hospital carbon emissions. [ABSTRACT FROM AUTHOR]

In this paper we provide an introduction to a set of tools for syntactic analysis based on graph theory, and apply them to the study of some properties of English accusativus cum infinitivo constructions, more commonly known as raising to object or exceptional case marking structures. We focus on puzzling extraction asymmetries between base-generated objects and 'raised' objects and on the interaction between raising to object and Right Wrap. We argue that a lexicalised derivational grammar with grammatical functions as primitives delivers empirically adequate analyses. [ABSTRACT FROM AUTHOR]

Although the rate of infection after the reconstruction of a ruptured anterior cruciate ligament (ACL) is low, prophylactic incubation of the graft with vancomycin (Vanco-wrap or vancomycin soaking) is routinely performed. A cytotoxic effect of vancomycin is reported for several cell types, and the prophylactic treatment might prevent infection but harm the tissue and cells. Aim: A comprehensive study was performed to investigate the effect of vancomycin on tendon tissue and isolated tenocytes using cell viability, molecular and mechanical analysis. Material and methods: Rat tendons or isolated tenocytes were incubated in increasing concentrations of vancomycin (0–10 mg/mL) for different times, and cell viability, gene expression, histology and Young's modulus were analyzed. Results: The clinically used concentration of vancomycin (5 mg/mL for 20 min) had no negative effect on cell viability in the tendons or the isolated tenocytes, while incubation with the toxic control significantly reduced cell viability. Increasing the concentration and prolonging the incubation time had no negative effect on the cells. The expression of Col1a1, Col3a1 and the tenocyte markers mohawk, scleraxis and tenomodulin was not affected by the various vancomycin concentrations. The structural integrity as measured through histological and mechanical testing was not compromised. Conclusion: The results proved the safe application of the Vanco-wrap on tendon tissue. Level of evidence: IV. [ABSTRACT FROM AUTHOR]

Antimicrobial coatings have a finite lifetime because of wear, depletion of the active ingredient, or surface contamination that produces a barrier between the pathogen and the active ingredient. The limited lifetime means that facile replacement is important. Here, we describe a generic method for rapidly applying and reapplying antimicrobial coatings to common-touch surfaces. The method is to deposit an antimicrobial coating on a generic adhesive film (wrap), and then to attach that modified wrap to the common-touch surface. In this scenario, the adhesion of the wrap and antimicrobial efficacy are separated and can be optimized independently. We demonstrate the fabrication of two antimicrobial wraps, both using cuprous oxide (Cu2O) as the active ingredient. The first uses polyurethane (PU) as the polymeric binder and the second uses polydopamine (PDA). Our antimicrobial PU/Cu2O and PDA/Cu2O wraps, respectively, kill >99.98% and >99.82% of the human pathogen, P. aeruginosa, in only 10 min, and each of them kill >99.99% of the bacterium in 20 min. These antimicrobial wraps can be removed and replaced on the same object in <1 min with no tools. Wraps are already frequently used by consumers to coat drawers or cars for aesthetic or protective purposes. [ABSTRACT FROM AUTHOR]

Copyright of Progress in Modern Biomedicine is the property of Publishing House of Progress in Modern Biomedicine and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Cryogenic tanks are still considered the most efficient method of storing fluids. This is due to its resistance to much damage caused by corrosion induced by low temperature and internal pressure. In this study, the finite element method is used to analyze the repair performance by a composite wrap in a corroded tank. A parametric analysis was carried out in order to highlight the effects of low temperature and pressure on the thermo-mechanical behavior of the corroded structure and to predict the evolution of stresses in the vicinity of corrosion. An approach to this problem based on the notion of material strength was necessary since it was essential to take both the size of the pre-existing defect and the amount of mechanical stresses. The results obtained show the effect of thermal and mechanical loading to examine their impact on the strength of the structure on the one hand, and on the other hand, the influence of the composite wrap repair in the different corrosion lengths (Path 1, 2, 3) on the reinforcement of the tank. Finally, repairing damage (corrosion) using FRP composites increases the durability of cryogenic tanks, which increases their efficiency their performance and increases their life, although the rate of improvement depends largely on operating conditions, such as pressure and temperature. [ABSTRACT FROM AUTHOR]

Copyright of Transactions the Japan Society of Refrigerating & Air Conditioning Engineers is the property of Japan Society of Refrigerating & Air Conditioning Engineers and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Art-E is the property of Suleyman Demirel University, Faculty of Fine Arts and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista Croma is the property of Revista Croma and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

NIMH requires intervention research to utilize an experimental therapeutic approach, identifying mediators to examine causal mechanisms of change. The authors propose utilizing self-determination theory (SDT) to guide research design for self-management interventions, using Wellness Recovery Action Plan (WRAP) as an exemplar. To delineate the theory's relevance to self-management interventions and recovery outcomes, the authors describe the main constructs of SDT and demonstrate its applicability to WRAP and recovery. Suggestions for research design and measurement strategies are provided. [ABSTRACT FROM AUTHOR]

Prehensile and gripping organs are recurring structures in different organisms that enhance friction by the reinforcement and redirection of normal forces. The relationship between organ structure and biomechanical performance is poorly understood, despite a broad relevance for microhabitat choice, movement ecology and biomimetics. Here, we present the first study of the biomechanics of prehensile feet in long-legged harvestmen. These arachnids exhibit the strongest sub-division of legs among arthropods, permitting extreme hyperflexion (i.e. curling up the foot tip). We found that despite the lack of adhesive foot pads, these moderately sized arthropods are able to scale vertical smooth surfaces, if the surface is curved. Comparison of three species of harvestmen differing in leg morphology shows that traction reinforcement by foot wrapping depends on the degree of leg sub-division, not leg length. Differences are explained by adaptation to different microhabitats on trees. The exponential increase of foot section length from distal to proximal introduces a gradient of flexibility that permits adaptation to a wide range of surface curvature while maintaining integrity at strong flexion. A pulley system of the claw depressor tendon ensures the controlled flexion of the high number of adesmatic joints in the harvestman foot. These results contribute to the general understanding of foot function in arthropods and showcase an interesting model for the biomimetic engineering of novel transportation systems and surgical probes. [ABSTRACT FROM AUTHOR]

Prehensile and gripping organs are recurring structures in different organisms that enhance friction by the reinforcement and redirection of normal forces. The relationship between organ structure and biomechanical performance is poorly understood, despite a broad relevance for microhabitat choice, movement ecology and biomimetics. Here, we present the first study of the biomechanics of prehensile feet in long-legged harvestmen. These arachnids exhibit the strongest sub-division of legs among arthropods, permitting extreme hyperflexion (i.e. curling up the foot tip). We found that despite the lack of adhesive foot pads, these moderately sized arthropods are able to scale vertical smooth surfaces, if the surface is curved. Comparison of three species of harvestmen differing in leg morphology shows that traction reinforcement by foot wrapping depends on the degree of leg sub-division, not leg length. Differences are explained by adaptation to different microhabitats on trees. The exponential increase of foot section length from distal to proximal introduces a gradient of flexibility that permits adaptation to a wide range of surface curvature while maintaining integrity at strong flexion. A pulley system of the claw depressor tendon ensures the controlled flexion of the high number of adesmatic joints in the harvestman foot. These results contribute to the general understanding of foot function in arthropods and showcase an interesting model for the biomimetic engineering of novel transportation systems and surgical probes. [ABSTRACT FROM AUTHOR]

Abstract—Experiments on extension of polyethylene film have been performed: the results have been analyzed in order to select wrapping material with optimal properties. [ABSTRACT FROM AUTHOR]

Prehensile and gripping organs are recurring structures in different organisms that enhance friction by the reinforcement and redirection of normal forces. The relationship between organ structure and biomechanical performance is poorly understood, despite a broad relevance for microhabitat choice, movement ecology and biomimetics. Here, we present the first study of the biomechanics of prehensile feet in long-legged harvestmen. These arachnids exhibit the strongest sub-division of legs among arthropods, permitting extreme hyper-flexion (i.e. curling up the foot tip). We found that despite the lack of adhesive foot pads, these moderately sized arthropods are able to scale vertical smooth surfaces, if the surface is curved. The comparison of three species of harvestmen differing in leg morphology show that traction reinforcement by foot wrapping depends on the degree of leg sub-division, not leg length. Differences are explained by adaptation to different microhabitats on trees. The exponential increase of foot section length from distal to proximal introduces a gradient of flexibility that permits adaptation to a wide range of surface curvature while maintaining integrity at strong flexion. A pulley system of the claw depressor tendon ensures the controlled flexion of the high number of adesmatic joints in the harvestman foot. These results contribute to the general understanding of foot function in arthropods and showcase an interesting model for the biomimetic engineering of novel transportation systems and surgical probes. [ABSTRACT FROM AUTHOR]

In this study the finite element method is used to analyse the performances of bonded composite wrap repair in cracked pipelines. Parametric analysis was performed in order to highlight the effects of the geometrical properties on the repair efficiency. The obtained results show that the optimization of the geometric properties of the wrap is still required to best improve the quality of repair. [ABSTRACT FROM AUTHOR]

In this study the finite element method is used to analyze the performances of bonded composite wrap repair of cracked steel pipelines. Parametric analysis was performed in order to highlight the effects of the geometrical properties on the repair efficiency. The experimental design method is used to explore the effects of wrap dimensions (length, angle and thickness) in order to optimize the repair process. We showed in using the MOODE.5 software the most dominant geometrical parameters on stress intensity factor at the crack front which to determine the most important parameters on the repair efficiency. This optimization can help the composite wrap designers to improve the repair performance and rehabilitation. [ABSTRACT FROM AUTHOR]

The essay explains Central-European traditional forms of manpower transport, in particular the ways to transport children. Carrying children using different transport aids has a long tradition and many common elements within the researched area, but we can also find many specific techniques and ways of carrying children as well as transport aids there. We can encounter regional archaisms and specifics there which make these ways of transport special. We focus on the oldest and most common transport mean -- a wrap that -- as a universal mean -- served for carrying children until the mid-20th century. We record the ways of carrying children on mother's body -- in front, on side or on back. The children used to be fixed in more ways as to their age, weight, and occasion to which they were transported (to the field, doctor's, baptism etc.). We have noticed a special way of carrying children in baskets on mother's back. Many of these described archaic ways are being revitalised, whereby original carrying techniques, and modern transport aids and materials are used. The essay summarizes results of long-term research and it compares them with materials published in the ethnographic atlases of Slovakia (EAS) and Poland, as well as with Czech works. [ABSTRACT FROM AUTHOR]

Polygenic risk scores (PRSs) have been used to combine the effects of variants with small effects identified by genome-wide association studies. We explore the potential for using pathway-specific PRSs as predictors of early changes in Alzheimer's disease (AD)-related biomarkers and cognitive function. Participants were from the Wisconsin Registry for Alzheimer's Prevention, a longitudinal study of adults who were cognitively asymptomatic at enrollment and enriched for a parental history of AD. Using genes associated with AD in the International Genomics of Alzheimer's Project's meta-analysis, we identified clusters of genes that grouped into pathways involved in amyloid-β (Aβ) deposition and neurodegeneration: Aβ clearance, cholesterol metabolism, and immune response. Weighted pathway-specific and overall PRSs were developed and compared to APOE alone. Mixed models were used to assess whether each PRS was associated with cognition in 1,200 individuals, cerebral Aβ deposition measured using amyloid ligand (Pittsburgh compound B) positron emission imaging in 168 individuals, and cerebrospinal fluid Aβ deposition, neurodegeneration, and tau pathology in 111 individuals, with replication performed in an independent sample. We found that PRSs including APOE appeared to be driven by the inclusion of APOE, suggesting that the pathway-specific PRSs used here were not more predictive than an overall PRS or APOE alone. However, pathway-specific PRSs could prove to be useful as more knowledge is gained on the genetic variants involved in specific biological pathways of AD. [ABSTRACT FROM AUTHOR]

Resolvin D1 (RvD1) belongs to a family of endogenously derived proresolving lipid mediators that have been shown to attenuate inflammation, activate proresolution signaling, and promote homeostasis and recovery from tissue injury. In this study we present a poly(lactic- co-glycolic acid) (PLGA) based thin-film device composed of layers of varying ratios of lactic and glycolic acid that elutes RvD1 unidirectionally to target tissues. The device demonstrated sustained release in vitro for 56 days with an initial burst of release over 14 days. The asymmetric design of the device released 98% of RvD1 through the layer with the lowest molar ratio of lactic acid to glycolic acid, and the remainder through the opposite side. We validated structural integrity of RvD1 released from the device by mass spectrometry and investigated its bioactivity on human vascular endothelial (EC) and smooth muscle cells (VSMC). RvD1 released from the device attenuated VSMC migration, proliferation, and TNF-α induced NF-κB activation, without evidence of cytotoxicity. Delivery of RvD1 to blood vessels was demonstrated ex vivo in a flow chamber system using perfused rabbit aortas and in vivo in a rat carotid artery model, with the devices applied as an adventitial wrap. Our results demonstrate a novel approach for sustained, local delivery of Resolvin D1 to vascular tissue at therapeutically relevant levels. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 31-41, 2017. [ABSTRACT FROM AUTHOR]

The present study evaluated the effectiveness of the Wellness Recovery Action Planning (WRAP) in a matched controlled design among individuals in recovery of mental illness in Hong Kong. Feedback from the first batch of WRAP facilitators in Hong Kong was sought for future implementation of WRAP. Participants were recruited from the service units of the largest nongovernmental organization (NGO) serving people in recovery in Hong Kong. Fifty-nine service users were recruited to learn WRAP and 59 service users served as matched controls. The WRAP program consisted of eight weekly sessions delivered by NGO staff who were certified WRAP facilitators. Assessments were completed before, immediately after, and 3 months after the program. Findings based on repeated measures ANOVAs showed that compared with their matched controls, WRAP participants reported significant increase in perceived social support. No significant change was noted in empowerment, hope, self-stigma, social network size, symptom severity, and recovery. Facilitators discussed issues on cultural adaptation and resources needed for future implementation of WRAP for Chinese. Discrepancies between the present findings and those from previous studies were discussed. This is the first quantitative study evaluating the effectiveness of WRAP among Chinese. [ABSTRACT FROM AUTHOR]

Cognitive decline is one of the hallmark features of Alzheimer's disease, but many studies struggle to find strong associations between cognitive function and genetic variants. In order to identify which aspects of cognition are more likely to have a strong genetic component, we assessed the heritability of various cognitive functions related to Alzheimer's disease in 303 initially asymptomatic middle-aged adult siblings with a parental history of Alzheimer's disease from the Wisconsin Registry for Alzheimer's Prevention. Participants underwent extensive cognitive testing, and six cognitive factors were identified via factor analysis. Working Memory and Visual Learning & Memory had the highest heritability (52% and 41%, respectively). Inclusion of APOE allele counts did not notably change heritability estimates, indicating that there are likely additional genetic variants contributing to cognition. These findings suggest that future genetic studies should focus on the cognitive domains of Working Memory and Visual Learning & Memory. [ABSTRACT FROM AUTHOR]

The development of daily naturalized flow in the water rights analysis package (WRAP) model at ungaged stations has difficulties because of low daily flow measurement at gaged stations, low available monthly naturalized flow, and budget constraints. This study proposes a procedure for developing daily naturalized flow at ungaged stations. The soil and water assessment tool (SWAT) model was validated with little daily flows and used for predicting the daily flow at gage stations that are near ungaged stations. The predicted daily flow is transferred at ungaged stations using the drainage area ratio (DAR) method. The transferred daily flow is aggregated and compared with monthly regulated flow computed by the WRAP model with the mean, standard deviation, mean relative error, Nash-Sutcliffe model efficiencies, and correlation coefficient (R²). The SWAT daily flow, which is referred to as the regulated flows, is converted using regression equations into naturalized flow and used as the daily pattern flow for monthly naturalized flow disaggregation. The system application of the SWAT and WRAP models with DAR and pattern methods provides alternative ways to generate daily naturalized flow at ungaged stations through disaggregating monthly naturalized flow at primary stations. [ABSTRACT FROM AUTHOR]

This paper aims to provide a rational approach to the concept of circumferential strain efficiency factor κε of circular concrete columns wrapped with fiber-reinforced polymer (FRP) jackets. The variable κε reflects the reduction in the FRP hoop rupture strain observed in experiments, relative to the true rupture strain of the FRP material obtained from standard coupon tests or manufacturer datasheets. Currently, the ACI 440.2R-08 design guide uses a constant empirical κε factor of 0.55 for any column, regardless of geometric or mechanical properties. A rational approach is proposed to calculate κε. It employs a simplified Tsai-Wu interaction failure envelope of FRP laminates and acknowledges the biaxial state of stresses in the jacket. A large database of 454 circular concrete specimens wrapped with unidirectional FRP fabrics has been compiled from literature and subjected to rigorous statistical evaluations. While the proposed model performed quite similarly to the current ACI 440.2R-08 in that it did not lead to significant improvement in prediction, it has the advantage of offering analytical rational bases to the observed phenomenon. It also distinguishes between columns of different geometric and mechanical properties, leading to a variable κε of 0.05 to 0.98 with a 0.65 average, which is consistent with experimental observations and more logical than the constant value of 0.55. [ABSTRACT FROM AUTHOR]

From 2004 to 2008, 1,834 Environmental Resource Permits were issued for development projects in coastal wetlands within the Charlotte Harbor National Estuary Program. We evaluated 118 sites utilizing three wetland functional assessment methods (WFAMs): Hydrogeomorphic Method (HGM), Wetland Rapid Assessment Procedure (WRAP), and Uniform Mitigation Assessment Method (UMAM). All functioned as designed and produced similar assessments of wetlands but yielded different mitigation results. The study results showed that HGM was most effective in identifying and quantifying wetland functions of coastal wetlands. UMAM and WRAP are useful but delivered mitigation ratios less than one in both function and area, resulting in net wetland losses. The wetland area lost over the study period was small relative to total wetland area, but the permitted wetland elimination is gradually reducing the extent of wetlands. The process relocates wetland functions out of impacted watersheds toward off-site mitigation areas. The WFAM site evaluations indicated an equal or greater balance of ecosystem functions within the total service area when utilizing off-site mitigation. However, there is loss of wetland area and function in the donor watershed and an increase in function, but not area, of wetlands in the receiving watershed. [ABSTRACT FROM AUTHOR]