Search

Background: Maxillary molar distalization is a common technique used in the non-extraction treatment of Angle Class II malocclusion that can effectively correct the molar relationship and create spaces for anterior teeth alignment. However, this approach may also impact the temporomandibular joint (TMJ) due to predictable changes in the posterior vertical dimension. Despite its widespread use, Class II malocclusions correction by molar distalization with clear aligners has not been investigated for their effects on the TMJ. Therefore, this study aimed to analyze the impact of sequential molar distalization using clear aligners on the TMJ. Methods: Three-dimensional CBCT scans of 23 non-growing patients (7 males, 16 females; mean age 29.8 ± 4.6 years) with skeletal class I or II malocclusion and a bilateral molar class II relationship treated by sequential upper molars distalization with orthodontic clear aligners (Invisalign, Align Technology, San Josè, Ca, USA). A total of 46 joints were examined before and after molar distalization using Anatomage InvivoDental 6.0.3. Linear and angular measurements of the mandibular joint were measured, including joint parameters, inclination, position, and the dimension of the condyle and articular fossa. In addition, 3D volumetric spaces of the joint were analyzed. All data were statistically analyzed by paired T test to determine the differences between the pre-and post-orthodontic procedures. Results: No statistically significant differences were found in all primary effects resulting from maxillary molars distalization by clear aligners on TMJ components measurements and joint spaces between T0 and T1. Meanwhile, statistically significant differences were observed in the linear position of the upper molars and the molar relationship parameter with at least P ≤ 0.05. Conclusion: Treatment by sequential upper molars distalization with clear aligners does not lead to significant TMJ parameters changes in condyle and fossa spaces, dimensions, and positions. [ABSTRACT FROM AUTHOR]

The primary goal of bone tissue engineering is to fabricate scaffolds that can provide a microenvironment similar to that of natural bone. Therefore, various scaffolds have been designed to replicate the bone structure. Although most tissues exhibit complicated structures, their basic structural unit includes stiff platelets arranged in a staggered micro-array. Therefore, many researchers have designed scaffolds with staggered patterns. However, relatively few studies have comprehensively analyzed this type of scaffold. In this review, we have analyzed scientific research pertaining to staggered scaffold designs and summarized their effects on the physical and biological properties of scaffolds. Compression tests or finite element analysis are typically used to evaluate the mechanical properties of scaffolds, and most studies have performed experiments in cell cultures. Staggered scaffolds improve mechanical strength and are beneficial for cell attachment, proliferation, and differentiation in comparison with conventional designs. However, very few have been studied in vivo experiments. Additionally, studies on the effect of staggered structures on angiogenesis or bone regeneration in vivo, particularly in large animals, are required. Currently, with the prevalence of artificial intelligence (AI)-based technologies, highly optimized models can be developed, resulting in better discoveries. In the future, AI can be used to deepen our understanding on the staggered structure, promoting its use in clinical applications. [ABSTRACT FROM AUTHOR]

Compared to fixed orthodontic appliances with brackets, thermoplastic invisible orthodontic aligners offer several advantages, such as high aesthetic performance, good comfort, and convenient oral health maintenance, and are widely used in orthodontic fields. However, prolonged use of thermoplastic invisible aligners may lead to demineralization and even caries in most patients' teeth, as they enclose the tooth surface for an extended period. To address this issue, we have created PETG composites that contain piezoelectric barium titanate nanoparticles (BaTiO3NPs) to obtain antibacterial properties. First, we prepared piezoelectric composites by incorporating varying amounts of BaTiO3NPs into PETG matrix material. The composites were then characterized using techniques such as SEM, XRD, and Raman spectroscopy, which confirmed the successful synthesis of the composites. We cultivated biofilms of Streptococcus mutans (S. mutans) on the surface of the nanocomposites under both polarized and unpolarized conditions. We then activated piezoelectric charges by subjecting the nanocomposites to 10 Hz cyclic mechanical vibration. The interactions between the biofilms and materials were evaluated by measuring the biofilm biomass. The addition of piezoelectric nanoparticles had a noticeable antibacterial effect on both the unpolarized and polarized conditions. Under polarized conditions, nanocomposites demonstrated a greater antibacterial effect than under unpolarized conditions. Additionally, as the concentration of BaTiO3NPs increased, the antibacterial rate also increased, with the surface antibacterial rate reaching 67.39% (30 wt% BaTiO3NPs). These findings have the potential for application in wearable, invisible appliances to improve clinical services and reduce the need for cleaning methods. [ABSTRACT FROM AUTHOR]

Oral squamous cell carcinoma (OSCC) is one of the most common malignancies worldwide, due to poor diagnosis and treatment. There is increasing evidence that demonstrates the involvement of long non-coding RNAs (lncRNAs) in carcinogenesis and cancer progression. Therefore, the aim of the present study was to explore potential lncRNA-associated features of patients with OSCC as a valuable and independent prognostic biomarker. A total of 268 lncRNA expression profiles and clinical patient information on OSCC were downloaded from The Cancer Genome Atlas database. The clinical information was exploited for prescreening, using Cox regression analysis, and differentially expressed lncRNAs (DElncRNAs) were identified using edgeR software. Using the 'caret' package, the datasets were categorized into test datasets and training datasets, respectively. Through bioinformatics, seven prognostic DElncRNAs were selected. Using the regression coefficients, a risk score based on the seven-DElncRNA signature was developed to assess the prognostic function of key DElncRNAs. According to the median risk score, patients were classified into high-risk and low-risk groups in the training and test datasets. Additionally, receiver operating characteristic (ROC) curve analysis was conducted to evaluate the sensitivity and specificity of the prognostic DElncRNAs, and the optimal cut-off point was obtained from ROC analysis. Based on the optimal cut-off point, the patients were also categorized into high-risk and low-risk groups. Notably, the optimal cut-off point was more sensitive than the median risk score, particularly in the test dataset. The Kaplan-Meier survival and log rank test analysis results indicated that the P-value, based on the optimal cut-off, was less than the median risk cut-off. Additionally, stratified analysis results revealed that the seven-DElncRNAs signature was also independent of OSCC age. Furthermore, the findings of the present study suggested that the seven-DElncRNA signature can be used as a potential prognostic indicator and may have important clinical significance in OSCC. [ABSTRACT FROM AUTHOR]

Previous designs of conventional aerodynamic lens have been widely used to focus large nanoparticles. It is a big challenge to focus small sub-10 nm nanoparticles. The focusing of small nanoparticle is controlled by two factors: high diffusivity and low inertia. Here, we made some modification for the aerodynamic lens system designed by Wang et al. (Aerosol Sci Technol 39:624, 1). The capability of focusing sub-10 nm nanoparticles was evaluated by the computational fluid dynamics software FLUENT. From numerical simulations of size-resolved particle trajectories, it was found that most of the small nanoparticles lost to the wall by diffusion. The effect of Brownian diffusion on the particle extraction from lens system is investigated. Simulations have shown that the Brownian diffusion perturbs the trajectories of nanoparticles that are dictated by the carrier gas and increase the probability of nanoparticle deposition on the wall. The effect of lens system geometry on the nanoparticles is also investigated. The results of simulation showed that the geometry of lens system affected the beam diameter and the transmission efficiency of nanoparticle. [ABSTRACT FROM AUTHOR]

Objective To investigate the effect of en-masse retraction of maxillary anterior teeth by rocking-chair archwire (RCA) in sliding mechanics. Methods The three dimensional finite element model of maxillary teeth was created based on spiral CT data of a patient by ANSYS software. The forces on each tooth and the torques on the six center of resistance (CR) of the anterior teeth induced by the deformation of RCA with different depth and anterior retraction hook (ARH) with different height were calculated when retracted from a mini-implant between the first molar and the second premolar. The movements of anterior teeth were observed eonthining different depth of RCA with different height of ARH. Results The clockwise torque in sliding mechanics to realize en-masse retraction of the anterior teeth could be counterbalanced by RCA of certain depth. The combination of 7.2 mm ARH and 2 mm RCA can be used to intrude and retract maxillary anterior teeth under the condition of applying mini-implant. Conclusion The excessive retraction that usually exists in traditional treatments can be avoided by RCA in sliding mechanics and intrusion and torque control during anterior segment retraction can also be achieved by this method. [ABSTRACT FROM AUTHOR]

It has been recently reported that, in a rat calvarial defect model, adding endothelial cells (ECs) to a culture of bone marrow stromal cells (BMSCs) significantly enhanced bone formation. The aim of this study is to further investigate the ossification process of newly formed osteoid and host response to the poly(L-lactide-co-1,5-dioxepan-2-one) [poly(LLA-co-DXO)] scaffolds based on previous research. Several different histological methods and a PCR Array were applied to evaluate newly formed osteoid after 8 weeks after implantation. Histological results showed osteoid formed in rat calvarial defects and endochondral ossification-related genes, such as dentin matrix acidic phosphoprotein 1 (Dmp1) and collagen type II, and alpha 1 (Col2a1) exhibited greater expression in the CO (implantation with BMSC/EC/Scaffold constructs) than the BMSC group (implantation with BMSC/Scaffold constructs) as demonstrated by PCR Array. It was important to notice that cartilage-like tissue formed in the pores of the copolymer scaffolds. In addition, multinucleated giant cells (MNGCs) were observed surrounding the scaffold fragments. It was concluded that the mechanism of ossification might be an endochondral ossification process when the copolymer scaffolds loaded with co-cultured ECs/BMSCs were implanted into rat calvarial defects. MNGCs were induced by the poly(LLA-co-DXO) scaffolds after implantation, and more specific in vivo studies are needed to gain a better understanding of host response to copolymer scaffolds. [ABSTRACT FROM AUTHOR]

Objective To evaluate the feasibility of identifying oral mucosa pathogenic bacteria by comparing the metabolic profiling of Sciccharomyces and try to find a convenient and rapid way to discriminate oral micro-organisms. Methods Saccharomyces albicams ATCC 10231 and Saccharomyces tropicalis ATCC 13803 and Saccharomyces glabrata ATCC 15126 were respectively inoculated in sabouraud medium. The growth quantity were measured periodically by a spectrophotometer. And the growth curves of the inoculated bacteria were completed. The culture solutions in stationary phases of the three bacteria were respectively tested with ¹H-nuclear magnetic resonance (¹H-NMR) spectroscopy. The data of H-NMR spectroscopy results were analyzed by principal components analysis (PCA). Results The PCA showed respectively a obvious clustering phenomena and the points of every two groups' data stayed separately. Therefore, the NMR-based metabonornics profiles could discriminate the three kinds of mucosa pathogenic bacteria. Conclusion The metabonomics can be expected to be a kind of promising useful method in quick discrimination of oral pathogenic bacteria. [ABSTRACT FROM AUTHOR]