Search

To enhance the charging and discharging strategy of the energy storage system (ESS) and optimize its economic efficiency, this paper proposes a novel approach based on the enhanced whale algorithm. Recognizing that the standard whale algorithm can sometimes suffer from local optima in high-dimensional multiobjective optimization, this study introduces chaotic mapping and individual information exchange mechanisms to address this challenge. The proposed algorithm explores optimal configurations for different energy device placements and capacities through encircling and bubble searches, evaluating various multiobjective functions for optimization. In addition, the algorithm refines both the system operation model and the ESS configuration model, with the objective function being the analysis of the average annual revenue of the ESS. Model testing results demonstrate that this algorithm yields more moderate energy storage (ES) capacity decay, extending operational time to 3,124 days and achieving a full-life cycle benefit of the ESS as high as 1,821,623.68 yuan. Also, our algorithm demonstrates high efficiency, with minimal test time (68.36 seconds) and quick optimization (0.031 seconds per cycle), regardless of problem complexity. [ABSTRACT FROM AUTHOR]

In order to optimize the performance of the transmission network (TN), this paper introduces the random fractal search algorithm based on the beetle antenna search algorithm, thus proposing the random fractal beetle antenna algorithm (SFBA). The main work of this research is as follows: (1) in the beetle antenna search algorithm, this study used a population of beetles and introduced elite members of the population in order to make the algorithm more stable and to some extent improve the accuracy of its answers. (2) Utilizing the elite reverse learning method and the leader's multilearning strategy for elites helps to strike a balance between the global exploration and local development of the algorithm. This strategy also further improves the ability of the algorithm to find the optimal solution. (3) Experiments on real experimental data show that the SFBA algorithm proposed in this paper is effective in improving TN performance. In summary, the research content of this paper provides a good reference value for the performance optimization of TN in actual production. [ABSTRACT FROM AUTHOR]

Wireless power transfer has been proved promising in various applications. The homogeneous winding method in loosely coupled transformers incurs unnecessary intense magnetic field distribution in the center and causes extra magnetic loss. An inhomogeneous winding method is proposed in this paper, and a relatively homogeneous magnetic field distribution inside the core is achieved. This paper investigated the magnetic loss of homogeneous winding and inhomogeneous winding for wireless power transfer. A theoretical model was built to evaluate magnetic loss under inhomogeneous winding. The coupling coefficient and magnetic loss were investigated individually and comparisons were made between different width ratio combinations. Theoretical analysis was validated in experiments. [ABSTRACT FROM AUTHOR]

In this paper, a concise and universal method to calculate the maximum RF (radio frequency) power transfer efficiency between arbitrary multiple transmitters and multiple receivers wireless power transfer (MIMO-WPT) system is presented. The method is based on maximum Rayleigh quotient which can be deduced either from the multi-port impedance matrix Z or from the multi-port scattering matrix S. Moreover, without any limitation on the transmitting/receiving element's geometry, numbers, operating frequency, coupling method, and so on, the approach is capable to evaluate both the transfer efficiency and the maximum transfer efficiency (MTE) of any type of transmitting and receiving elements, and to obtain the optimum impedances for all transmitting or receiving ports as well. At the end of this paper, the MTEs of some typical MIMO-WPT systems will be calculated to validify the proposed method, and the effectiveness against the receiver's misalignment by using multiple transmitters will be demonstrated. [ABSTRACT FROM AUTHOR]

This paper aims to solve the optimization problems in far-field wireless power transfer systems using deep reinforcement learning techniques. The Radio-Frequency (RF) wireless transmitter is mounted on a mobile robot, which patrols near the harvested energy-enabled Internet of Things (IoT) devices. The wireless transmitter intends to continuously cruise on the designated path in order to fairly charge all the stationary IoT devices in the shortest time. The Deep Q-Network (DQN) algorithm is applied to determine the optimal path for the robot to cruise on. When the number of IoT devices increases, the traditional DQN cannot converge to a closed-loop path or achieve the maximum reward. In order to solve these problems, an area division Deep Q-Network (AD-DQN) is invented. The algorithm can intelligently divide the complete charging field into several areas. In each area, the DQN algorithm is utilized to calculate the optimal path. After that, the segmented paths are combined to create a closed-loop path for the robot to cruise on, which can enable the robot to continuously charge all the IoT devices in the shortest time. The numerical results prove the superiority of the AD-DQN in optimizing the proposed wireless power transfer system. [ABSTRACT FROM AUTHOR]

Wireless power transfer (WPT) has attracted attention from academia and industry in recent years. WPT has natural electrical isolation between primary and secondary side, which ensures safe charging in an underwater environment. This breakthrough technology greatly facilitates the deep-sea power transmission. However, at the current stage the transferred power and energy efficiency level are not up to that of the WPT system in the air. The major concerns include the attenuation is seawater, extreme temperature and pressure conditions, disturbance of ocean currents, and bio-security. Three questions are answered in this paper: first, the expressions of eddy current loss and attenuation of electromagnetic wave in seawater are unified, and the influence of seawater as transmission medium on the WPT system is discussed. Second, the evolution of electromagnetic coupling structure suitable for underwater applications is studied. Third, the loss and heating effects of an underwater WPT system and the corresponding bio-fouling phenomenon are investigated. The questions above were addressed through analysis of electrical properties, coupler structures, and bio-fouling effects of the underwater WPT system. This paper will facilitate the study and research on underwater WPT applications. [ABSTRACT FROM AUTHOR]

In this paper, a complete wireless power transmission scenario is presented, including an external transmission antenna, an in-body embedded antenna, a rectifying circuit, and a powered sensor. This system operates at the Industrial, Scientific, and Medical bands (902.8–928 MHz). For the antenna design, important parameters including reflection coefficient, radiation pattern, and specific absorption rate are presented. As for the rectifying circuit, a precise model is created utilizing off-the-shelf components. Several circuit models and components are examined in order to obtain optimum results. Finally, this work is evaluated against various sensors' power needs found in literature. [ABSTRACT FROM AUTHOR]

Conventional magnetically coupled resonant wireless power transfer systems are faced with resonant frequency splitting phenomena and impedance mismatch when a receiving coil is placed at misaligned position. These problems can be avoided by using uniform magnetic field distribution at receiving plane. In this paper, a novel 3D transmitting coil structure with improved uniform magnetic field distribution is proposed based on a developed optimization method. The goal is to maximize the average magnetic field strength and uniform magnetic field section of the receiving plane. Hence, figures of merit (FoM1 and FoM2) are introduced and defined as product of average magnetic field strength and length or surface along which uniform magnetic field is generated, respectively. The validity of the optimization method is verified through laboratory measurements performed on the fabricated coils driven by signal generator at operating frequency of 150 kHz. Depending on the allowed ripple value and predefined coil proportions, the proposed transmitting coil structure gives the uniform magnetic field distribution across 50% to 90% of the receiving plane. [ABSTRACT FROM AUTHOR]

Radiofrequency surface coils used as receivers in magnetic resonance imaging (MRI) rely on cables for communication and power from the MRI system. Complex surface coil arrays are being designed for improving acquisition speed and signal-to-noise ratio. This, in-turn makes the cables bulky, expensive, and the currents induced on cables by time-varying magnetic fields of the MRI system may cause patient harm. Though wireless power transfer (WPT) can eliminate cables and make surface coils safer, MRI poses a challenging electromagnetic environment for WPT antennas because the antennas made using long conductors interact with the static and dynamic fields of the MRI system. This paper analyses the electromagnetic compatibility of WPT antennas and reveals that commercially available antennas are not compatible with MRI systems, presenting a safety risk for patients. Even when the risk is minimized, the antennas couple with surface coils leading to misdiagnosis. This paper presents an approach to eliminate safety risks and minimize coupling using a filter named "floating filter." A WPT antenna without a filter has a distortion of 27%, and floating filters reduce the distortion to 2.3%. Secondly, the floating filter does not affect the power transfer efficiency, and the transfer efficiency of 60% is measured with and without filters. [ABSTRACT FROM AUTHOR]

This paper presents an effective and time saving procedure for designing a three-coil resonant inductive wireless power transfer (WPT) link. The proposed approach aims at optimizing the power transfer efficiency of the link for given constraints imposed by the specific application of interest. The WPT link is described as a two-port network with equivalent lumped elements analytically expressed as function of the geometrical parameters. This allows obtaining a closed-form expression of the efficiency that can be maximized by acting on the geometrical parameters of the link by using a general purpose optimization algorithm. The proposed design procedure allows rapidly finding the desired optimal solution while minimizing the computational efforts. Referring to the case of an application constraining the dimensions of the receiver, analytical data are validated through full-wave simulations and measurements. [ABSTRACT FROM AUTHOR]

In this paper, possible coupling configurations of a four-plate capacitive power transfer system are studied by varying the combinations of its input and output ports. A voltage source is applied between two of the four plates, and a load is connected to the other two to form different circuit topologies. A mathematical model based on a 4 × 4 mutual capacitance matrix is established for equidistantly placed four identical metal plates. Based on the proposed model, four separate circuit topologies are identified and analysed in detail and described in a general form. The electric field distributions of the coupling configurations are simulated by ANSYS Maxwell. The theoretical modeling and analysis are then verified by a practical system, in which four aluminum plates of 300 mm × 300 mm are used and placed with a gap of 10 mm between adjacent plates. The experimental results show that the measured output voltage and power under the four coupling configurations are in good agreement with the theoretical results. It has found that the voltage gain is the highest when the two inner plates are connected to the source, and this coupling configuration also has the lowest leakage electric field. [ABSTRACT FROM AUTHOR]

This paper presents a comparative study on three types of slim coil structures used as a three-dimensional (3-D) receiver in a wireless power transfer system with a planar transmitter coil. The mutual coupling values and their variations between the receiver structures and the transmitter coil are compared under different distances and angular orientations with respect to the transmitter coil. The merits of performance are related to the consistency of the mutual coupling values under different orientations in a range of distances from the transmitter coil. The practical results show that slim 3-D receiver coil structures can be compatible with a planar transmitter coil with reasonably high-mutual coupling. [ABSTRACT FROM AUTHOR]

Space probes suffer from a fundamental problem, which is the limited energy available for their operation. Energy supply is essential for continuous operation and ultimately the most important sub-system for its sustainable functioning. Considering, for instance, the last space probe put on Comet 67P/Churyumov–Gerasimenko, called "Philae", which was sent by Rosetta (http://www.esa.int/Our%5fActivities/Space%5fScience/Rosetta), to operate and to monitor comet activity, its operation was jeopardized due to the fact that it landed on a shadowed zone (no direct sunlight). Since its operational energy was only based on solar harvesters, the energy for its operation was limited by solar energy availability. In this paper a study on a viable alternative based on wireless power transmission is presented and discussed at the system level. It is proved that, using current technology, it is possible to create alternatives or supplement to existing power sources such as solar panels to power up these important space probes and to secure their operation. [ABSTRACT FROM AUTHOR]

Wireless power transmission (WPT) systems with moveable mechanical parts have been acquired more and more attention during the past decade. However, due to the moveable feature of transmitting coil and receiving coil, misalignment issue lead to extra power loss, decrease in efficiency, increase in control complexity, and unwanted performance degradation of the whole system. Moreover, it happened frequently than those traditional planar coils systems. The motivation for this paper is trying to have a deep understanding of quantitative relationship between ball-shaped coils mutual inductance and misalignment. Based upon that, engineers would know more detail of the coils position and mutual inductance. So, optimized design might be achieved. On considering that, this paper presents a WPT system with a ball-shaped coil for robot joints. A mutual inductance calculation based on filament method aimed at ball-shaped coil is proposed. Based on these, nine different ball-shaped coil solutions are calculated. Then, model with a minimized change rate of mutual inductance against the angular misalignment is chosen as the optimized design. Circuit analysis of the WPT system with the series–series resonant topology is conducted to choose a proper working frequency and load. Finally, an experimental platform is established. It demonstrates the feasibility of the proposed calculation method and the feasibility of the WPT prototype. [ABSTRACT FROM AUTHOR]

In this paper, a new design configuration has been proposed in which a prototype of resonant inductive power transfer-based contactless power transfer to wound rotor has been developed which provides field power to brushless alternating current (BLAC) or brushless direct current (BLDC) motors without the use of permanent magnets in the rotor. Further, wound field in the rotor of DC motor can be powered without carbon brushes. The proposed design facilitates motor performance improvement by adding an extra dimension of field flux control, while the armature circuit is conventionally fed from position detection and commutation schemes. It contains a primary multilayer concentrated coil fed with high-frequency resonating AC supply or switched mode supply. A single layer helical secondary coil coaxially fixed on the shaft receives high frequency wireless AC power transmitted from primary coil. Fast rectifier inside the hollow shaft and DC filter provides the transferred DC power to field terminals in the rotor. It has been verified that rotor power can be varied linearly with linear variation in input DC power with the highest efficiency at the resonant frequency. Available power to the rotor remains invariable with rotational speed and angle, which is a necessary requirement for rotor field. DC voltage on the rotor terminals can be effectively controlled during standstill as well as during rotation at any speed. [ABSTRACT FROM AUTHOR]

Radiofrequency ablation (RFA) is a non-invasive image-guided procedure where tumors are heated in the body with electrical current. RFA procedures are commonly indicated for patients with limited local disease or who are not surgical candidates. Current methods of RFA use multiple cords and wires that ergonomically complicate the procedure and present the risk of cutting or shorting the circuit if they are damaged. A wireless RFA technique based on electromagnetic induction is presented in this paper. The transmitting and receiving coils were coupled to resonate at the same frequency to ensure the highest power output. The receiving coil was connected to two insulated electrodes on a catheter, which allowed the current to flow to the targeted tissue. The prototype system was tested with ex-vivo bovine tissue, which has similar thermal and electrical properties to human tissue. The setup can monitor the received power, efficiency, temperature, and ablation zone during ablation procedures. The maximum received power was 15 W, and the average maximum efficiency was 63.27%. The novel system was also able to ablate up to a 2 cm ablation zone in non-perfused tissue. This proof of concept for performing RFA wirelessly with electromagnetic induction may merit further optimization. [ABSTRACT FROM AUTHOR]

Studies on inductive power transfer (IPT) systems are most times either theoretical or experimental. In this paper, we want to bring theoretical models and experimental data together using the impedance based interface proposed in SAE J2954. This proposal characterizes the IPT system by impedances at both coil terminals. We show how the experimental data was retrieved at the interface and use it to validate an analytical model and a Simulink model described within this study. Such models can support the design and development process and therefore a comparison with reality is necessary. [ABSTRACT FROM AUTHOR]

In this paper, we use convex optimization to maximize power efficiency through cascaded multi-coil wireless power transfer systems and investigate the resulting characteristic spacing. We show that although the efficiency is generally a non-convex function of the coil spacing, it can be approximated by a convex function when the effects of higher-order couplings are small. We present a method to optimize the spacing of cascaded coils for maximum efficiency by perturbing the solution of the convex approximation to account for higher-order interactions. The method relies on two consecutive applications of a local optimization algorithm in order to enable fast convergence to the global optimum. We present the optimal configurations of coil systems containing up to 20 identical coils that transfer power over distances up to 4.0 m. We show that when spacing alone is optimized, there exist an optimal number of coils that maximize transfer efficiency across a given distance. We also demonstrate the use of this method in optimizing the placement of a select number of high-Q coils within a system of low-Q relay coils, with the highest efficiencies occurring when the high-Q coils are placed on either side of the largest gaps within the relay coil chain. [ABSTRACT FROM AUTHOR]

This paper presents design considerations for an integrated wireless power transfer (WPT) and power line communication (PLC) system (e.g. WPT-PLC). The main goal is to enable wireless charging of mobile electronic products, along with high data rate communication over the shared wireless inductive resonant channel. Starting from a couple of resonant coils, characterized by the S-parameters matrix, the design of an impedance matching network and decoupling filters is carried out to better decouple power and data signals. A pulse-driven class-E power amplifier (PA) and a rectifier are first conceived based on the measured S-parameters and load-pull characterizations. Second, a sine-driven class-E power link, operating at 6.78 MHz, is proposed to reduce the total harmonic distortion of the integrated WPT-PLC system. These design steps aim to ensure high-power efficiency and low harmonic distortion of the class-E PA in order to mildly affect the channel capacity of the PLC. The harmonic interferences of the pulse-driven and sine-driven class-E power links are compared and discussed, together with the electromagnetic compatibility levels, the channel capacity, and the noise disturbances of the PLC channel in order to guarantee an optimized power and data transfer in the integrated WPT-PLC system. [ABSTRACT FROM AUTHOR]

In this paper, a multiantenna wireless transmitter communicates with an information receiver while radiating RF energy to surrounding energy harvesters. The channel between the transceivers is known to the transmitter, but the channels between the transmitter and the energy harvesters are unknown to the transmitter. By designing its transmit covariance matrix, the transmitter fully charges the energy buffers of all energy harvesters in the shortest amount of time while maintaining the target information rate toward the receiver. At the beginning of each time slot, the transmitter determines the particular beam pattern to transmit with. Throughout the whole charging process, the transmitter does not estimate the energy harvesting channel vectors. Due to the high complexity of the system, we propose a novel deep Q-network algorithm to determine the optimal transmission strategy for complex systems. Simulation results show that deep Q-network is superior to the existing algorithms in terms of the time consumption to fulfill the wireless charging process. [ABSTRACT FROM AUTHOR]

The characteristic transfer parameters of inductive power transfer systems highly depend on the relative position of the coils to each other. While translational offset has been investigated in the past, the effect of rotatory offset on the transfer parameters is widely unclear. This paper contains simulation results of an inductive power transfer system with a rotatory offset in three axes and shows the possible improvements in the coupling coefficient. As a result, rotation angles can be used as control parameters and thereby increase the system efficiency. Alternatively, the allowed misalignment area of the secondary coil can be increased while maintaining the functionality and same dimensions. [ABSTRACT FROM AUTHOR]

Advances in technology have seen mobile robots becoming a viable solution to many global challenges. A key limitation for tetherless operation, however, is the energy density of batteries. Whilst significant research is being undertaken into new battery technologies, wireless power transfer may be an alternative solution. The majority of the available technologies are not targeted toward the medium power requirements of mobile robots; they are either for low powers (a few Watts) or very large powers (kW). This paper reviews existing wireless power transfer technologies and their applications on mobile robots. The challenges of using these technologies on mobile robots include delivering the power required, system efficiency, human safety, transmission medium, and distance, all of which are analyzed for robots operating in a hazardous environment. The limitations of current wireless power technologies to meet the challenges for mobile robots are discussed and scenarios which current wireless power technologies can be used on mobile robots are presented. [ABSTRACT FROM AUTHOR]

More mobile devices such as mobile phones and robots are wirelessly charged for convenience, simplicity, and safety, and it would be desirable to achieve three-dimensional (3D) wireless charging with high spatial freedom and long range. This paper proposes a 3D wireless charging cube with three orthogonal coils and supporting magnetic cores to enhance the magnetic flux outside the cube. The proposed system is simulated by Ansoft Maxwell and implemented by a downsized prototype. Both simulation and experimental results show that the magnetic cores can strengthen the magnitude of B-field outside the cube. The final prototype demonstrates that the power transfer distance outside the cube for getting the same induced electromotive force in the receiver coil is extended approximately by 50 mm using magnetic cores with a permeability of 2800. It is found that the magnitude of B-field outside the cube can be increased by increasing the width and the permeability of the magnetic cores. The measured results show that when the permeability of the magnetic cores is fixed, the induced electromotive force in the receiver coil at a point 300 mm away from the center of the cube is increased by about 2V when the width of the magnetic cores is increased from 50 to 100 mm. The increase in the induced electromotive force at an extended point implies a greater potential of wireless power transfer capability to the power pickup. [ABSTRACT FROM AUTHOR]

Advances in material science and semiconductor technology have enabled a variety of inventions to be implemented in electronic systems and devices used in the medical, telecommunications, and consumer electronics sectors. In this paper, a wireless charging system is described as a wearable body heater that uses a chair as a transmitter (Tx). This system incorporates the widely accepted Qi wireless charging standard. Alignment conditions of a linear three-element coil arrangement and a 3 × 3 coil matrix array are investigated using voltage induced in a coil as a performance indicator. The efficiency obtained is demonstrated to be up to 80% for a voltage of over 6.5 Volts and a power transfer of over 5 Watts. Our results and proposed approach can be useful for many applications. This is because the wireless charging system described herein can help design seating areas for the elderly and disabled, commercial systems, consumer electronics, medical devices, electronic textiles (e-textiles), and other electronic systems and devices. [ABSTRACT FROM AUTHOR]

Wireless energy harvesting is an effective way to power condition monitoring sensors which are the basis of smart grid. In this paper, a new free-standing I-shaped core is designed to scavenge electromagnetic energy from large alternating current. An I-shaped core can guide more magnetic flux by adding a pair of magnetic flux collector plates at both ends of the rod core. It weakens the core demagnetization field and enables more energy to be collected. Since a magnetic field line can be bent with high-permeability soft magnetic materials, a highly efficient grid-shaped coil is proposed. Compared with the I-shaped coil, its weight is lighter and power density is higher. A Mn-Zn ferrite with high relative permeability and ultralow conductivity can effectively reduce eddy current loss, which proves to be the most suitable material. The measured open circuit voltage agrees well with the theoretical value. The experimental results show that the output power can reach 4.5 mW when the I-shaped coil is placed in a magnetic flux density of 6.5 μTrms. The power density is 7.28 μW/cm3. Therefore, the proposed design can be very effective for supplying condition monitoring sensors. [ABSTRACT FROM AUTHOR]

The radio spectrum is one of the world's most highly regulated and limited natural resources. The number of wireless devices has increased dramatically in recent years, resulting in a scarcity of available radio spectrum due to static spectrum allocation. However, many studies on static allocation show that the licensed spectrum bands are underutilized. Cognitive radio has been considered as a viable solution to the issues of spectrum scarcity and underutilization. Spectrum sensing is an important part in cognitive radio for detecting spectrum holes. To detect the availability or unavailability of primary user signals, many spectrum sensing techniques such as matched filter detection, cyclostationary feature detection, and energy detection have been developed. Energy detection has gained significant attention from researchers because of its ease of implementation, fast sensing time, and low computational complexity. Conventional detectors' performance degrades rapidly at low SNR due to their sensitivity to the uncertainty of noise. To mitigate noise uncertainty, Shannon, Tsallis, Kapur, and Renyi entropy-based detection has been used in this study, and their performances are compared to choose the best performer. According to the comparison results, the Renyi entropy outperforms other entropy methods. In this study, two-stage spectrum sensing is proposed using energy detection as the coarse stage and Renyi entropy-based detection as the fine stage to improve the performance of single-stage detection techniques. Furthermore, the performance comparison among conventional energy detection, entropy-based detection, and the proposed two-stage techniques over AWGN channel are performed. The parameters such as probability of detection, false alarm probability, miss-detection probability, and receiver operating characteristics curve are used to evaluate the performance of spectrum sensing techniques. It has been shown that the proposed two-stage sensing technique outperforms single-stage energy detection and Renyi entropy-based detection by 11 dB and 1 dB, respectively. [ABSTRACT FROM AUTHOR]

An internal wireless system (IWS) for satellites was proposed in a previous study to reduce the weight of satellites. It is a system that uses wireless communication modules to communicate between the satellite's subsystems. We proposed a complete IWS that employs microwave wireless power transmission technology, and we proposed a design of GHz band high efficiency rectifier based charge pump rectifiers with a class-f filter called class-f charge pump rectifiers. We theoretically compare the diode losses in a charge pump and single shunt rectifier, and experimentally verify the results. Apart from this, we consider that the class-f charge pump rectifiers will be used for a rectenna array. In order to know the direct current (DC) load change of class-f charge pump circuits is connected as a rectenna array, we measured the conversion efficiencies of a 2 by 2 rectenna array, connected in series and in parallel. The results of the experiment indicate that the optimum load of the rectifier changes to four times DC load when connected in series, and to 1/4 the DC load when connected in parallel. [ABSTRACT FROM AUTHOR]

Companies that produce energy transmit it to any or all households via a power grid, which is a regulated power transmission hub that acts as a middleman. When a power grid fails, the whole area it serves is blacked out. To ensure smooth and effective functioning, a power grid monitoring system is required. Computer vision is among the most commonly utilized and active research applications in the world of video surveillance. Though a lot has been accomplished in the field of power grid surveillance, a more effective compression method is still required for large quantities of grid surveillance video data to be archived compactly and sent efficiently. Video compression has become increasingly essential with the advent of contemporary video processing algorithms. An algorithm's efficacy in a power grid monitoring system depends on the rate at which video data is sent. A novel compression technique for video inputs from power grid monitoring equipment is described in this study. Due to a lack of redundancy in visual input, traditional techniques are unable to fulfill the current demand standards for modern technology. As a result, the volume of data that needs to be saved and handled in live time grows. Encoding frames and decreasing duplication in surveillance video using texture information similarity, the proposed technique overcomes the aforementioned problems by Robust Particle Swarm Optimization (RPSO) based run-length coding approach. Our solution surpasses other current and relevant existing algorithms based on experimental findings and assessments of different surveillance video sequences utilizing varied parameters. A massive collection of surveillance films was compressed at a 50% higher rate using the suggested approach than with existing methods. [ABSTRACT FROM AUTHOR]

An approach to improve wireless power transfer (WPT) to implantable medical devices using loop antennas is presented. The antenna exhibits strong magnetic field and dense flux line distribution along two orthogonal axes by insetting the port inside the antenna area. This design shows excellent performance against misalignment in the y-direction and higher WPT as compared with a traditional square loop antenna. Two antennas were optimized based on this approach, one wearable and the other implantable. Both antennas work at both the ISM (Industrial, Scientific, and Medical) band of 433 MHz for WPT and the MedRadio (Medical Device Radiocommunications Service) band of 401–406 MHz for communications. To test the WPT for implantable medical devices, a miniaturized rectifier with a size of 10 mm × 5 mm was designed to integrate with the antenna to form an implantable rectenna. The power delivered to a load of 4.7 kΩ can be up to 1150 μW when 230 mW power is transmitted which is still under the safety limit. This design can be used to directly power a pacemaker, a nerve stimulation device, or a glucose measurement system which requires 70 μW, 100 μW, and 48 μW DC power, respectively. [ABSTRACT FROM AUTHOR]

Distribution of wireless power charging field uniformly on a large area pad is critical for power receivers, particularly for wearable devices, wherein small form factor coils are involved. Since the receiver coil size is quite limited in these types of applications, the device is very sensitive to the amount of field it could retain and hence, it needs special placement or snapping mechanism to fix it at an optimum location for reliable wireless charging. In order to overcome this limitation for the end-user, a dual-mode multi-coil power transceiver system is proposed; utilizing resonance filtering to increase the amount of total power delivered with the rather uniform spatial distribution. Two concentric coils; center one driven by 6.78-MHz high-frequency driver (A4WP) and the outer larger one with a 200-KHz low-frequency driver (Qi) with resonant blocker could transfer up to 50 mW standards compliant flat power to a 13-mm radius 30-turns wearable receiver coil everywhere across an 8-cm radius charging pad area without any alignment requirement or snapping. Two different feedback topologies corresponding to each of the H-Bridge power drivers were also presented as an automatic series resonance coil drive frequency lock mechanism, extracting peak powers for each system individually from a standard 5 V-1A USB wall charger. [ABSTRACT FROM AUTHOR]

The deployment of multi-insulator tunneling diodes has recently had more attention to be used as rectifiers in energy harvesting rectennas with good potentiality for a millimeter and terahertz range. However, with the rather complicated math to obtain the current–voltage relation, it is difficult to evaluate the design figures of merit (FOM)s such as asymmetry, nonlinearity, responsivity, and dynamic resistance and monitor the impact of changing physical parameters on them. This complicates the decision-making process for the required physical parameters. In this work, a heuristic optimization framework using genetic algorithm is suggested using the transfer matrix method to find the combination of physical parameters which satisfies the minimum required FOM set by users and weighted by their preference. [ABSTRACT FROM AUTHOR]

Typical wireless power transfer (WPT) systems on the market charge only a single receiver at a time. However, it can be expected that the need will arise to charge multiple devices at once by a single transmitter. Unfortunately, adding extra receivers influences the system efficiency. By impedance matching, the loads of the system can be adjusted to maximize the efficiency, regardless of the number of receivers. In this work, we present the analytical solution for achieving maximum system efficiency with any number of receivers for capacitive WPT. Among others, we determine the optimal loads and the maximum system efficiency. We express the efficiency as a function of a single variable, the system kQ-product and demonstrate that load capacitors can be inserted to compensate for any cross-coupling between the receivers. [ABSTRACT FROM AUTHOR]

Telemetry acquisition from rodents is important in biomedical research, where rodent behavior data is used to study disease models. Telemetry devices for such data acquisition require a long-term powering method. Wireless power transfer (WPT) via magnetic resonant coupling can provide continuous power to multiple small telemetric devices. Our loosely coupled WPT (LCWPT) system consists of a stationary primary coil and multiple freely moving secondary coils. Our previous LCWPT system was designed to transfer reasonable power to secondary coils at poor orientations but transfers excessively high amounts of power at favorable orientations. Reasonable power is needed for telemetry and radio electronics, but highly induced voltage on the secondary coil creates excess energy which must be dissipated by previous devices, and caused problems (localized heat damage and variations in component properties) leading to drift in operating frequency. To remedy these two problems, a novel scheme is proposed to automatically tune or detune the resonant frequency of the secondary circuit. Our closed-loop controlled tuning or detuning (CTD) approach can be used to prevent excessive power transfer by detuning, or to improve power transfer by tuning, depending on the need. Furthermore, this novel CTD scheme facilitates the use of multiple telemetric devices. [ABSTRACT FROM AUTHOR]

Aiming at the influence of coupling coefficient variation on the output voltage of a high-power LCC-S topology inductively coupled power transfer (ICPT) system, a synchronous three-phase triple-parallel Buck converter is used as the voltage adjustment unit. The control method for the three-phase current sharing of synchronous three-phase triple-parallel Buck converter and the constant voltage output ICPT system under the coupling coefficient variation is studied. Firstly, the hybrid model consisting of the circuit averaging model of the three-phase triple-parallel Buck converter and the generalized state-space average model for the LCC-S type ICPT system is established. Then, the control methods for three-phase current sharing of the synchronous three-phase triple-parallel Buck converter and constant voltage output of ICPT system are studied to achieve the multi-objective integrated control of the system. Finally, a 3.3 kW wireless charging system platform is built, the experimental results have verified the effectiveness of the proposed modeling and control method, and demonstrated the stability of the ICPT system. [ABSTRACT FROM AUTHOR]

The changes in physical environmental parameters have severe impacts on food safety and security. Therefore, it is important to understand micro-level physical parameter changes occurring inside food packages to ensure food safety and security. The emergence of smart packaging has helped to track and inform the specific changes such as a change in humidity, temperature, and pH taken place in the microenvironment in the food package. Moreover, these key physical parameters help determine the freshness of the food as well. Radio-frequency identification (RFID)-based sensors are an emerging technology that has been used in smart packaging to detect changes in the physical stimuli in order to determine food freshness. This review looks at the key environmental factors that are responsible for food safety and food freshness, the role of smart packaging with sensors that can measure changes in physical stimuli in the microclimate and the detailed review of RFID-based sensors used in smart packaging for food-freshness applications and their existing limitations. [ABSTRACT FROM AUTHOR]

A novel, dual-band, voltage-multiplying (RF-DC) rectifier circuit with load-tuned stages resulting in a 50 Ω input-impedance and high RF-DC conversion in 2.4 and 5.8 GHz bands for wireless energy-harvesting is presented. Its novelty is in the use of optimal-length transmission lines on the load side of the 4 half-wave rectifying stages within the two-stage voltage multiplier topology. Doing so boosts the rectifier's output voltage due to an induced standing-wave peak at each diode's input, and gives the rectifier a 50 Ω input-impedance without an external-matching-network in the 2.4 GHz band. Comparisons with other rectifiers show the proposed design achieving a higher DC output and better immunity to changing output loads for similar input power levels and load conditions. The second novelty of this rectifier is a tuned secondary feed that connects the rectifier's input to its second stage to give dual-band performance in the 5.8 GHz band. By tuning this feed such that the second stage and first stage reactances cancel, return-loss resonance in the 5.8 GHz band is achieved in addition to 2.4 GHz. Simulations and measurements of the design show RF-DC sensitivity of −7.2 and −3.7 dBm for 1.8V DC output, and better than 10 dB return-loss, in 2.4 and 5.8 GHz bands without requiring an external-matching-network. [ABSTRACT FROM AUTHOR]

Microwave power transfer (MPT) can solve certain types of problems. For example, Internet of Things requires a flexible configuration of sensor networks, which is hindered by wired-charging sensors. This problem can be overcome by MPT techniques. However, the transmission efficiency of MPT is lower than that of wired transmission. This study focuses on the operation of rectifiers having a pulse-modulated input signal. Although a pulse-modulated wave is effective for improving the RF-DC conversion efficiency, the output voltage waves of rectifiers have a high ripple content. Moreover, the harmonic balance method cannot be used to simulate the operation of a pulse-modulated rectifier. To reduce the ripple content, a smoothing capacitor should be connected in parallel to an output load. We investigated the influence of a smoothing capacitor, the general characteristics of rectifiers under pulse-modulated waves, and the effectiveness of using pulse-modulated waves for improving RF-DC conversion efficiency. In conclusion, we reveal a necessary condition of the smoothing capacitor for improvement, demonstrate the effectiveness of pulse modulation, and show that the optimum impedance with a pulse-modulated wave input is an inverse of duty ratio times as compared to that with continuous wave input. [ABSTRACT FROM AUTHOR]

This article experimentally explores the use of ferrite cores to miniaturize the receivers used for inductive wireless power transmission. A variety of receivers were designed and fabricated using cylindrical ferrite cores, ranging in total size from 47 to 687 mm3. The receivers were tested with a commercially available transmitter operating under the Rezence (Air Fuel Alliance) standard at 6.78 MHz. Experiments measured performance of the receivers in terms of their maximum power draw and efficiency as functions of the receiver load and transmission distance. Experimental results showed that ferrite-core receivers could draw multiple watts of power with end-to-end efficiencies in excess of 50%. While the efficiencies are less than a commercially planar coil receiver, the ferrite-core receivers offer a >50% reduction in mass and >90% reduction in footprint. As a result, the receiver power densities reach up to 17.6 W/cm3, which is a 25× improvement over previously reported work. This effort confirms the viability of ferrite-core receivers for size- and weight-constrained applications. [ABSTRACT FROM AUTHOR]

The objective of the presented work is to take advantage of the precision capabilities of tailor-fiber-placement (TFP) embroidery processes in order to qualify carbon-fiber parts as viable antennas for wireless power transfer applications in multifunctional carbon-fiber-reinforced plastic (CFRP) composites. The solution comes first from a literature study of electrical, high-frequency, and textile engineering concepts. This review built familiarity with the technological challenges and state-of-the-art of the presented technology. Next step was iterative experimentation of machine capabilities for the production of carbon-fiber antennas. Finally, antenna prototypes were produced and their physical and electrical characteristics were evaluated through several test methods. The results showed that TFP embroidery machines were capable of producing quality, carbon antennas. Induction values of the antennas from 0.5 to 3.5 'H were achieved. Signal transfer efficiencies from carbon-antenna transmitters to an aftermarket receiver show promise in commercial application. [ABSTRACT FROM AUTHOR]