Search

This paper proposes on-driving experience sharing algorithms at junctions in infrastructure-assisted vehicles-to-everything networks. For the purpose, a millimeter-wave (mmWave) technology is used because it provides multi-Gbps data rates which is helpful for handling users’ short stay times at junctions and spatial reuse due to high beam directionality which is helpful for interference-avoidance among densely deployed vehicles at junctions. To realize on-driving experience sharing, the proposed algorithms focus on joint resource allocation and scheduling for 3GPP-compliant multiple unicast vehicle-to-vehicle (V2V) communications where the vehicles are group leaders (GLs) in 3GPP Mode 4(d). The resource allocation stands for the roadside unit (RSU) allocation to scheduled V2V GL links where RSU is essentially required for overcoming blockage by establishing two-hop relaying. Because vehicles stay for short times at junctions, this paper designs two algorithms without or with delay considerations. Without delay considerations, the joint optimization of RSU allocation and scheduling was originally formulated as mixed 0-1 non-convex optimization. However our proposed algorithm reformulates the problem into mixed 0-1 convex optimization, which is computationally easier to solve. With delay considerations, our proposed algorithm dynamically controls video contents frame rates for time-average on-driving video sharing quality maximization subject to delay constraints, inspired by Lyapunov optimization. Extensive simulation results demonstrate that our algorithms can significantly outperform in a variety of scenarios. Furthermore, we conduct the cost analysis for the proposed algorithms in terms of capital expenditure (CAPEX) and operating expenditure (OPEX). [ABSTRACT FROM AUTHOR]

Range-based positioning using wireless signal has gained remarkable attention in past decades. Accurately extracting the distance information, i.e., estimating parameters of individual multipath, is of interest. It has been shown that diffuse multipath component (DMC) in wireless propagation channel has significant influence on channel estimation and, thus, the ranging performance. In addition to specular component (SC), DMC should be considered in order to improve the estimated accuracy of channel paths’ parameters and, thus, the ranging performance. In this paper, we extend the quasi-maximum likelihood space-alternating generalized expectation-maximization (SAGE) algorithm by incorporating an autoregressive moving average (ARMA) filter to estimate the channel parameters under the presence of DMC. The parameters of both DMC and SC are estimated in an iterative approach, where the DMC is assumed as colored noise and the ARMA-filter is used to estimate the contributions from DMC. The validation of the algorithm based on measured data shows that both SC and DMC can be accurately estimated by the proposed approach. A comparison with standard SAGE and AR-SAGE is conducted, where the results reveal that the proposed method outperforms other two approaches in terms of ranging accuracy. [ABSTRACT FROM AUTHOR]

In this paper, we propose an adaptive vehicle clustering algorithm based on fuzzy C-means algorithm, which aims at minimizing power consumption of the vehicles. Specifically, the proposed algorithm firstly dynamically allocates the computing resources of each virtual machine in the vehicle, according to the popularity of different virtualized network functions. The optimal clustering number to minimize the total energy consumption of vehicles is determined using the fuzzy C-means algorithm and the clustering head is selected based on vehicles moving direction, weighted mobility, and entropy. Simulation results are provided to confirm that the proposed algorithm can decrease the power consumption of vehicles while satisfying the vehicle delay requirement. [ABSTRACT FROM AUTHOR]

Grant-free non-orthogonal multiple access (NOMA) scheme is considered as a promising candidate for the enabling of massive connectivity and reduced signalling overhead for Internet of Things (IoT) applications in massive machine-type communication (mMTC) networks. Exploiting the inherent nature of sporadic transmissions in the grant-free NOMA systems, compressed sensing based multiuser detection (CS-MUD) has been deemed as a powerful solution to user activity detection (UAD) and data detection (DD). In this paper, block coordinate descend (BCD) method is employed in CS-MUD to reduce the computational complexity. We propose two modified BCD based algorithms, called enhanced BCD (EBCD) and complexity reduction enhanced BCD (CR-EBCD), respectively. To be specific, by incorporating a novel candidate set pruning mechanism into the original BCD framework, our proposed EBCD algorithm achieves remarkable CS-MUD performance improvement. In addition, the proposed CR-EBCD algorithm further ameliorates the proposed EBCD by eliminating the redundant matrix multiplications during the iteration process. As a consequence, compared with the proposed EBCD algorithm, our proposed CR-EBCD algorithm enjoys two orders of magnitude complexity saving without any CS-MUD performance degradation, rendering it a viable solution for future mMTC scenarios. Extensive simulation results demonstrate the bound-approaching performance as well as ultra-low computational complexity. [ABSTRACT FROM AUTHOR]

The Internet of vehicles (IoV) is a large information interaction network that collects information on vehicles, roads and pedestrians. One of the important uses of vehicle networks is to meet the entertainment needs of driving users through communication between vehicles and roadside units (RSUs). Due to the limited storage space of RSUs, determining the content cached in each RSU is a key challenge. With the development of 5G and video editing technology, short video systems have become increasingly popular. Current widely used cache update methods, such as partial file precaching and content popularity- and user interest-based determination, are inefficient for such systems. To solve this problem, this paper proposes a QoE-driven edge caching method for the IoV based on deep reinforcement learning. First, a class-based user interest model is established. Compared with the traditional file popularity- and user interest distribution-based cache update methods, the proposed method is more suitable for systems with a large number of small files. Second, a quality of experience (QoE)-driven RSU cache model is established based on the proposed class-based user interest model. Third, a deep reinforcement learning method is designed to address the QoE-driven RSU cache update issue effectively. The experimental results verify the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Dq impedance measurement is of great importance as a part of the impedance-based analysis. At present, impedance of objects in single-phase vehicle-grid system are mainly obtained by injecting the voltage or current disturbance of one single frequency into the system circularly. However, as the number of measurement frequency points increases, there will produce much time-consuming of measurement. In this paper, a quick dq impedance measurement algorithm for single-phase vehicle-grid system based on multi-frequency sweep is proposed. First, pseudo-random binary sequences (PRBS) and ternary sequences are modified as the driving signals rather than directly injecting into the control link. Then three types of disturbance with specific frequency characteristics are introduced into the system and their parameters setting principle are given for the first time. According to the different characteristics of measurement objects, the proposed algorithms are also different to ensure the maximum specificity and sensitivity. Finally, for different objects in vehicle-grid system like traction network, single-phase converter and dual-interleaved converter, simulation and experimental results based on the hardware in the loop real-time simulation platform both show the correctness of the proposed algorithm, and the possible causes of errors are also analyzed in detail. Moreover, the proposed algorithm makes it possible to quickly measure the dq impedance of the single-phase vehicle-grid system, and the correctness of the theoretical and measured value can be judged and used for the stability analysis of electrical systems. [ABSTRACT FROM AUTHOR]

This paper aims to explore the performance potential of a novel dual-mode power-split hybrid powertrain. First, the steady-state power split characteristics for the proposed hybrid powertrain in different modes are analyzed. The mode switching strategy is developed to maximize powertrain efficiency, which is verified by using dynamic programming based on direct transmit points (DTPs). Moreover, a novel multi-objective evolutionary algorithm based on the decomposition (MOEA/D) method used in a nested way with dynamic programming is proposed to solve the multi-objective optimization of the PS-HEVs for the first time, and the computational efficiency and superiority of the proposed algorithm is compared with the commonly used NSGA-II algorithm. The results show that the MOEA/D based multi-objective optimization framework has similar performance in the search for the Pareto frontier but significantly higher computational efficiency than that of the NSGA-II algorithm. The obtained Pareto frontier provides optimal design candidates for hybrid powertrain systems. [ABSTRACT FROM AUTHOR]

This paper proposes a novel bit loading algorithm to multicarrier non-orthogonal multiple access (NOMA) systems to maximize the system total throughput while satisfying the users’ individual quality of service (QoS) constraints. Although bit loading is generally a non-deterministic polynomial-time (NP)-hard problem, even for orthogonal multiple access (OMA), the mutual interference between the users, and the dependence of power coefficients and modulation orders are additional challenges that add substantial complexity to the optimization problem. Therefore, in this paper, we propose an efficient bit loading algorithm for multicarrier NOMA systems and compare the complexity and throughput with a corresponding OMA system. The obtained results show that for the case of NOMA, bit loading provides an additional degree of freedom that allows non-uniform spectrum sharing among the users. In particular scenarios, the system may experience hybrid modes of operation, where the system switches between NOMA and OMA. The obtained numerical results show that NOMA can outperform OMA by 100% in terms of spectral efficiency, for a two-user scenario. The complexity of the loading process for NOMA is noticeably higher than OMA, which is due to the high complexity associated with the bit error rate (BER) computation in the case of NOMA. [ABSTRACT FROM AUTHOR]

Vehicle and airborne navigation users are facing more and more complex signal interference and even spoofing. If vehicles and aircraft do not strengthen their anti-spoofing ability, their navigation performance is bound to be adversely affected. global navigation satellite system (GNSS) spoofing technology has gradually become a preferred interference method for spoofer because of its high concealment and great harm. For spoofer, user terminal increasingly adopts GNSS with inertial measurement unit (IMU): tightly-coupled GNSS/IMU, on this basis, user also configures a variety of anti-spoofing techniques to effectively deal with spoofing. Even if spoofer slowly changes user's positioning, if spoofing strategy is unreasonable, it will lead to the violation of parameter rationality of coupled filter output parameters and spoofing observation, which greatly increases the difficulty of spoofing. In view of the above problems, from the perspective of spoofer, in order to effectively counter the non cooperative target of assembling tightly-coupled GNSS/IMU by using GNSS spoofing, this paper establishes GNSS spoofing mathematical model, and proposes a slowly varying spoofing algorithm to avoid tightly-coupled GNSS/IMU with multiple anti-spoofing techniques based on the analysis of the influence mechanism of spoofing on the positioning of tightly-coupled GNSS/IMU, the algorithm proposes a measurement deviation determination method to avoid a variety of anti-spoofing techniques, which can gradually pull the positioning results of coupled system, and successfully avoid anti-spoofing techniques detection of least squares residual receiver autonomous integrity monitoring (RAIM) and parameter rationality check. The experimental results show that the algorithm can gradually change positioning of tightly-coupled GNSS/IMU within 30 s, and the north, east and down displacements basically achieve the spoofing effect, the errors with the expected offset are −0.5 m, 1.9 m and 12.7 m respectively. At the same time, the detection of the above anti-spoofing techniques is avoided. The mean value of test statistics for tightly-coupled system is reduced by 75.4% and does not exceed the alarm threshold, so as to achieve the purpose of spoofing, the effectiveness and high concealment of the spoofing algorithm are proved. [ABSTRACT FROM AUTHOR]

For vehicle-to-network communications, handover (HO) management enables vehicles to maintain the connection with the network while transiting through coverage areas of different base stations (BSs). However, the high mobility of vehicles means shorter connection periods with each BS that leads to frequent HOs, hence raises the necessity for optimal HO decision making for high quality infotainment services. Machine learning is capable of capturing underlying pattern via data driven methods to find optimal solutions to complex problems, and much learning-based HO optimization research has been conducted focusing on specific network setups. However, attention still needs to be paid to the actual deployment aspect and standardized datasets or simulation environments for evaluation. This paper proposes a deep reinforcement learning-based HO algorithm using the input parameters that are configurable in the existing measurement report of cellular networks. The performance of the proposed algorithm is evaluated using the well-known network simulator ns-3 with its official LTE module. A realistic network setup in the city center of Glasgow (U.K.) is configured with vehicle trajectories generated by the routes mobility model using Google Maps Directions API. Evaluation results reveal that the proposed algorithm significantly outperforms the A3 RSRP baseline with an average of 25.72% packet loss reduction per HO, suggesting significant improvement in quality of service of phone call and video streaming, etc. The proposed algorithm also has a small implementation cost compared to some state-of-the-art and should be deployed by a software update to a local BS controller. [ABSTRACT FROM AUTHOR]

This paper considers the hybrid precoder design in millimeter wave (mmWave) multi-input multi-output (MIMO) systems with low-resolution analog phase shifters. Aiming at reducing the complexities of the near-optimal algorithms, we propose a low-complexity multi-user hybrid precoding scheme based on tree-coding-aided adaptive-cross-entroy (TC-ACE) algorithm. By defining some discrete variables for the analog precoders and combiners, the problem of hybrid precoding is transformed into a cross-entroy (CE) optimization problem, which can be solved by iteratively updating the probability distributions of the predefined discrete variables. In order to derive the closed-form expression of the probability distributions, tree-coding is used to encode each entry of the analog precoders and combiners with a binary number. Through iterations, optimal analog precoders and combiners will be obtained when its probabilities are sufficiently high. Simulation results show that when the number of users exceeds a certain value, the proposed scheme outperforms the alternating minimization algorithm and coordinate descent method in terms of both the sum-rate and complexity. [ABSTRACT FROM AUTHOR]

This paper examines the problem of predictive gear scheduling for fuel consumption minimization in connected/automated heavy trucks. The literature highlights the fuel economy benefits of such predictive scheduling, but there is a need to optimize such scheduling online, in real time. To address this need, we begin by using dynamic programming (DP) to schedule gear shifting offline, in a manner that achieves a globally optimal Pareto tradeoff between the conflicting objectives of minimizing fuel consumption and shift frequency. The computational cost of DP is unfavorable for online implementation, but we present two algorithms addressing this challenge. Both algorithms rely on the fact that in the Pareto limit where fuel consumption minimization is the sole objective, DP furnishes a simple static shift map. Our first algorithm trains a recurrent neural network to prune the shift schedule generated by this map. The second algorithm performs this pruning in a direct manner tailored to reduce the schedule's rain flow count. We simulate these algorithms for different drive cycles. Both algorithms achieve a reasonable tradeoff between fuel consumption and gear shift frequency. However, the rain flow count algorithm is both more effective in approaching the DP-based Pareto front and more computationally efficient. [ABSTRACT FROM AUTHOR]

This paper presents a new approach to accurately and efficiently identifying a large number of wireless devices blindly installed to known three-dimensional installation/fitting points, based on received signal strengths (RSSs) between the devices. The approach is non-trivial because of the factorial, mapping nature of the considered problem, the multiplicative ranging errors of the RSS measurements (with standard deviation of 5–7 dB), and the requirement of high mapping accuracy in many internet-of-things (IoT) applications, e.g., industrial IoT and aircraft. The consideration of a structured environment where the set of candidate node positions is known beforehand shifts the problem of interest from a pure position estimation problem to a position assignment problem. The key idea of the proposed approach is that we interpret the position mapping problem with a probabilistic graphical model, where the factorial nature of mapping (more specifically, the mutual exclusiveness of devices at every installation point) is fully captured. A max-product belief propagation is designed against the probabilistic graph, to estimate the max-marginal position distribution of each device. The Kuhn-Munkres algorithm is applied to preserve the mutual exclusiveness of devices throughout the belief propagation and to decide device locations based on the estimated position distributions. Large-scale simulations and field tests are carried out, showing that the new approach achieves close-to-100% accuracy in simulations with hundreds of blindfolded devices under RSS measurement errors with standard deviation of 5–7 dB. Our approach also achieves 100% accuracy in all field trials with 76 devices inside the cabin of a Fokker 100 airplane, dramatically outperforming baseline techniques. [ABSTRACT FROM AUTHOR]

Power control is becoming increasingly essential for the fifth-generation (5G) and beyond systems. An example use-case, among others, is the unmanned-aerial-vehicle (UAV) communications where the nearly line-of-sight (LoS) radio channels may result in very low signal-to-interference-plus-noise ratios (SINRs). The authors in (Chiang et al., 2007) proposed to efficiently and reliably solve this kind of non-convex problem via a series of geometrical programmings (GPs) using condensation approximation. However, it is only applicable for a small-scale network with several communication pairs and practically infeasible with more (e.g., tens of) nodes to be jointly optimized. We therefore in this paper aim to provide new insights into this problem. By properly introducing auxiliary variables, the problem is transformed to an equivalent form which is simpler and more intuitive for condensation. A novel condensation method with linear complexity is also proposed based on the form. The enhancements make the GP-based power control feasible for both small- and especially large-scale networks that are common in 5G and beyond. The algorithm is verified via simulations. A preliminary case study of uplink UAV communications also shows the potential of the algorithm. [ABSTRACT FROM AUTHOR]

Cooperative Vehicle-Infrastructure System (CVIS) can provide innovative services for traffic management and enable trips to be safer, more coordinated, and smarter. In the CVIS, the vehicles upload crowd sensing data to the Vehicular Edge Computing (VEC) server for quick data fusion and informed decision-making. However, with the ever-increasing number of vehicles, the VEC server cannot undertake massive computation-intensive tasks due to the limited edge computing capabilities. In this paper, we propose a reverse offloading framework that can fully utilize the vehicular computation resource to relieve the burden of the VEC server and further reduce the system latency. Under the proposed offloading framework, the binary reverse offloading (BRO) and partial reverse offloading (PRO) strategies are designed for two types of tasks, i.e., non-partitioned tasks and partitioned tasks. We formulate the system latency minimization problem by optimizing reverse offloading decisions, and the communication and computation resources allocation. Due to the non-convex and existing variables coupling, the original problem is transformed into the equivalent weighted-sum optimization problem. Based on the alternative optimization, we decouple the weighted-sum optimization problems into the two subproblems, and the closed-form expressions of transmission power and computation frequency of vehicles and RSU are derived. Low complexity greedy based efficient searching (GES) algorithm and joint alternative optimization based bi-section searching (JAOBSS) algorithm are proposed for BRO and PRO strategies, respectively. The algorithm complexity and performance bounds are analyzed. Simulation results show that the proposed GES algorithm can achieve optimal performance with low complexity. Besides, the proposed GES and JAOBSS algorithms can significantly improve the performance compared with other baseline schemes by 6.14% and 13.46% at least. [ABSTRACT FROM AUTHOR]

In this paper, an intelligent reflecting surface (IRS) is deployed to assist the terahertz (THz) communications. The sum-rate of user equipments (UEs) is maximized while guaranteeing the rate requirement of each UE. A block coordinate searching (BCS) algorithm is proposed to jointly optimize the IRS’s coordinates, phase shifts, THz sub-bands allocation and power control. Specifically, the relaxation with penalties based (RPB) algorithm is developed to obtain feasible coordinates of the IRS and guarantee the monotonicity of objective value. In addition, the IRS phase shifts are formulated as closed-form expressions with introduced pricing factors. Simulation results show that the proposed scheme can significantly enhance system performance. [ABSTRACT FROM AUTHOR]

In this paper, we consider a computation offloading problem in a three-tier network consisting of multiple mobile users (MUs), multiple edge clouds, and a central cloud. On this basis, we formulate a system Energy Time Cost ($ETC$) minimization problem by jointly optimizing the resource allocation, mobile-edge matching decision, and offloading decision. Due to the difficulty of directly solving the formulated problem, we decompose it and propose two offloading algorithms, namely Gale-Shapley based Minimum/Sequential Offloading Algorithm (GS-MOA/GS-SOA), to optimize offloading decisions by minimizing the system $ETC$ , in which the mobile-edge matching strategies based on the proposed Gale-Shapley based Mobile-Edge mAtching aLgorithm (GS-MEAL) and resource allocations are optimized iteratively. The simulations show the effectiveness of our proposed algorithm. [ABSTRACT FROM AUTHOR]

To meet the execution requirements of delay-sensitive services in vehicular edge computing (VEC) networks, vehicular services need to be offloaded to edge computing nodes. For complex, large-scale services, the services need to be migrated if the services are not completed before the vehicles leave the coverage of edge computing nodes. Trust and resource matching between areas thus become major problems. This paper studies the decision model of vehicular service offloading and migration. First, software-defined network (SDN) technology is introduced into the traditional network architecture, and a two-layer distributed SDN-controlled VEC network architecture is designed, which is divided into a domain control layer and an area control layer. In this framework, we use the consortium blockchain as a carrier to share network topology information between SDN controllers to prevent information leakage. We then established a service offloading and migration optimization problem model to minimize service execution delay, reduce energy consumption and maximize the throughput of the blockchain system. We describe the problem model as a Markov Decision Process (MDP), introduce a deep reinforcement learning (DRL) algorithm named asynchronous advantage actor-critic (A3C) and design a dynamic service offloading and migration algorithm (DSOMA) based on A3C to solve the problem. Simulation results show that DSOMA can increase the throughput of the blockchain system, and DSOMA is superior to the deep Q-learning (DQN) algorithm and greedy offloading algorithm in reducing service execution delay and system energy consumption. [ABSTRACT FROM AUTHOR]

This paper considers optimal joint time, frequency, and power allocation for energy-efficient device-to-device (D2D) communications in an overlay cellular network, where multiple D2D transmitters communicate with their corresponding D2D receivers while utilizing the energy harvested from a cellular base station (BS). Due to channel estimation error and feedback delays, the channel state information (CSI) available at the transmitters is usually imperfect, which can significantly deteriorate the energy efficiency (EE) of the considered system. To mitigate the impact of imperfect CSI, we formulate a non-convex robust optimization problem for the maximization of the EE (in bits/Joule) of the system while ensuring quality of service (QoS) requirements on the minimum data rata and the minimum amount of harvested energy for cellular and D2D users, respectively. We reveal that the optimal energy-efficient D2D transmission should exhaust all the harvested energy of each D2D transmitter. Exploiting this fact, we propose an efficient iterative algorithm for obtaining the optimal solution. To strike a balance between performance and computational complexity, we further propose a low-complexity suboptimal algorithm. Simulation results show that compared with several baseline schemes, both the proposed optimal and suboptimal algorithms can significantly improve the EE of wireless-powered D2D communications under imperfect CSI. Moreover, the proposed suboptimal algorithm is close-to-optimal when the number of cellular users are small or the channel estimation error is large. [ABSTRACT FROM AUTHOR]

During the running of electric locomotives, a large amount of operating data will be stored through the Analog-Digital Converter (ADC) and the recording oscillograph of the on-board Traction Control Unit (TCU). Analysis based on mass data to detect slipping is of great significance for saving energy, improving the performance and safety of the traction control system of electric locomotives. Therefore, after analyzing and summarizing the advantages of Empirical Wavelet Transform (EWT) and Fuzzy Entropy (FE) algorithm in data processing and the classification theory of Support Vector Machine (SVM), this paper proposed a SVM slipping detection method based on EWT and FE algorithm. Firstly, feature extraction is carried out on the locomotive wheelset velocity data collected by the on-board velocity sensor, that is, the feature vector of data is extracted by calculating fuzzy entropy value after EWT, and the velocity data is converted into feature matrix for slipping-detection of SVM. Then considering the defects of traditional optimization algorithms such as Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) in the parameter optimization of SVM, Genetic Particle Swarm Optimization Algorithm (GAPSO) is proposed to optimize the parameters of SVM classification model, and the slipping detection model of SVM is established through training samples, which realizes high-precision slipping detection. Finally, combined with a large number of locomotive data, the comparative analysis test is carried out, the results show that the feature extraction method based on EWT and FE algorithm has excellent ability of mode decomposition and feature extraction, GAPSO has efficient optimization ability, and the proposed slipping detection method can accurately detect slipping. [ABSTRACT FROM AUTHOR]