Search

Molybdenum doped vanadium oxide film on quartz and silicon substrates are grown by pulsed RF magnetron sputtering method. Surface morphology, phase analysis and oxide states are investigated by field emission scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy techniques, respectively. Crystalline nature of the film deposited on both quartz and silicon are depicted. The transmittance and reflectance spectra recorded for the entire solar region. Further, optical constants viz. optical band gap and refractive index of the deposited films are estimated. Wavelength dependent low reflectance characteristic is observed for the deposited film on silicon. IR emittance (εIR) and sheet resistance (Rs) of the film are also evaluated. Copyright © 2017 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Present study reports for the first time laser cutting of multilayered coatings on both side of ultra thin (i.e., 75 µm) glass substrate based rigid optical solar reflector (OSR) for spacecraft thermal control application. The optimization of cutting parameters was carried out as a function of laser power, cutting speed and number of cutting passes and their effect on cutting edge quality. Systematic and in-detail microstructural characterizations were carried out by optical and scanning electron microscopy techniques to study the laser affected zone and cutting edge quality. Sheet resistance and water contact angle experiments were also conducted locally both prior and after laser cut to investigate the changes of electrical and surface properties, if any. [ABSTRACT FROM AUTHOR]

Sunshield membranes made of germanium‐coated black polyimide (GBP) or Kapton are often used on the reflector/transmitter antenna of satellites for thermal control applications. However, the germanium top layer is prone to degrade during ground storage and implementation. Hence, vacuum/inert gas‐sealed packaging is required for storing the membranes, followed by a staggered fabrication schedule as the shelf‐life of the GBP is identified as only ~6 months. In the present study, microstructural, thermo‐optical, and electrical properties along with X‐ray photoelectron spectroscopy (XPS) studies for evaluating oxidation states of the as‐received and degraded GBP films have been investigated thoroughly. The radio frequency (RF) loss behavior of both the films has also been studied for S band (2.5–3.5 GHz), Ku band (10.5–14.5 GHz), and Ka band (30–35 GHz). Copyright © 2015 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]