Search

Conventional multi-cylinder drying of paper and board involves a mixture of conductive drying from steam-heated dryer cylinders and convective drying by the flow of heated air over the surface of the paper web in the pockets. Pocket ventilation is a critical component in assisting heat and mass transfer during the drying process but is the primary contributor toward removing evaporated water from the web. Air temperature, velocity, and humidity are critical parameters involved in the convective drying process. This paper covers an experimental study involving the design and development of a small lab-scale setup for convective drying of various grades of paper and board, monitoring multiple parameters like paper temperature, moisture content, air humidity, temperature, and velocity measured in situ as the drying proceeds with continuous and accurate sampling capabilities for all parameters in the sample and the system. Instantaneous drying rates, heat, and mass transfer coefficients were also deduced for every time step till the paper completely dried. Furthermore, the coefficients obtained were also reported in the form of dimensionless correlations, and the results were compared against traditional correlations used in the modeling of paper drying. This data will be useful in process development, modeling, design, and the paper drying process simulation. [ABSTRACT FROM AUTHOR]

At the beginning of the 20th century, the eclectic artist Mariano Fortuny y Madrazo patented two innovative methods for polychrome printing on fabrics and textiles, giving life to Fortuny fabric production in Venice. The first patent was related to colour application, while the second to a special machine that allows continuous printing using cylindrical rollers. Despite the descriptions, the methodology and materials used remain a secret. In collaboration with the Fortuny Museum in Venice, this research aimed at studying and identifying the different steps of Fortuny printing methodologies. Printing matrices, fabrics and raw materials found in the artist's studio were analysed in a multi-analytical campaign through digital microscopy, X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy in attenuated total reflectance (FTIR-ATR), μ-Raman spectroscopy and gas chromatography–mass spectrometry (GC–MS). Three main pigments were identified in paper samples: ivory black, a copper-based pigment, and a carbon black pigment with ultramarine for blues. The pigments were bound with linseed oil and colophony in varying proportions. Polychrome silk fabrics were dyed with a base colour, and then the coloured patterns were superimposed by continuous printing. Prussian blue was identified as one of the textile inks. Results provided a better understanding of printing methodology. [ABSTRACT FROM AUTHOR]

Accurately assessing the color quality of printed products becomes intricate when optical brightening agents (OBAs) are introduced in papers, as diverse interactions occur among different ink pigments and papers containing OBAs due to variations in ink formulation chemistries. Specifically, alkali‐based pigments, commonly used as spot colors, are carefully formulated to ensure consistency across production batches. The presence of OBAs, which absorb ultraviolet light and emit it in the visible spectrum, significantly affects color perception and accuracy on paper when interacting with these inks. This research marks an initial investigation into how OBAs in paper influence the color accuracy of five distinct alkali‐based spot color paste inks using a Little Joe ink proofer. The research examines the physical, optical, and colorimetric characteristics of two paper samples‐one with OBA and one without‐ and analyzes the colorimetric changes occurring during the ink drying process. The results indicate that reflex blue, purple, and violet spot colors achieved acceptable delta E (ΔE00) value of below 3 on non‐OBA paper, with rubine red being on the borderline at 3.1 after 48 h. In contrast, purple, rhodamine red and violet achieved acceptable ΔE00 below 3 on high OBA paper. The distinct behavior exhibited by certain inks led to the conclusion that achieving a consistent proofing procedure across diverse alkali‐based ink formulations is impractical. [ABSTRACT FROM AUTHOR]

This article asks whether the slow process of divesting Indian native schoolteachers of their traditional authority was only about new concepts and representations of education and knowledge. Following the methodological idea of constellations of affordances, emphasising a relational ontology, the article discusses whether changes in the shape and the relations of objects in Indian classrooms together with the arrival of new objects may have played a silent role in the process of erosion of schoolteachers' authority. Based on a wide range of official and missionary sources, but also referring to individual native voices, the article reconstructs more pervasive and subtle transformations of native elementary classrooms, focusing on surfaces for writing and on "books". The article argues that shifts in the materialities of elementary native schooling took place that repositioned old "gurus" in an unfavourable light before the take-off of teacher training institutions would provide for new definitions of their role as schoolmasters. [ABSTRACT FROM AUTHOR]

La transición hacia el uso del papel para la enseñanza de la escritura en las escuelas elementales públicas en México no fue sencilla. Al finalizar el siglo XIX, se había cuestionado el uso de las pizarras por el riesgo que representaban para la salud, pues muchas veces los estudiantes borraban sus escritos con saliva y el material con el que estaban fabricadas no siempre guardaba las especificaciones necesarias, además el ruido al escribir era insoportable. En cambio, el papel, desde el punto de vista higiénico, pedagógico y estético, fue considerado un material superior frente a la dureza de la pizarra, el brillo de la superficie y la poca precisión que se obtenía en el trazo de las letras. Derivado de este planteamiento, se vislumbró seriamente la posibilidad de la adopción de papel en las escuelas oficiales. Sin embargo, este material era escaso y muy caro. Hacia el cambio de siglo, sólo dos fábricas de papel podían surtir a las escuelas y era necesario que abarataran el precio, que el sistema de distribución garantizara el abastecimiento y que el suministro fuera continuo. Este artículo analiza el inicio del proceso de reconversión de una tecnología para la enseñanza como era la pizarra por el papel. Analizo el gasto que significó y cómo esta modificación fue resultado de una multiplicidad de relaciones sociales, culturales, económicas y políticas que se entrecruzaron para dar una nueva configuración del tiempo, el ruido y los valores establecidos en el salón de clases. The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom. [ABSTRACT FROM AUTHOR]

The global overabundance of electronic waste and ever‐increasing concerns regarding the energy‐and material‐intensive manufacturing processes associated with traditional electronics are driving the development of solution‐processed, degradable electronics. Of note, the industry‐dominating prevalence of harmful lead‐based materials in sensing and actuating devices drives the push for more eco‐friendly solution‐processed piezoelectric systems. Yet current ecofriendly multi‐material printing processes are limited by both the conventional challenges of multilayer processes as well as the low‐temperature thermal constraints of biodegradable materials. Herein, a novel approach for fabricating fully printed, sustainable piezoelectric transducers on paper substrates is presented. Low‐temperature screen‐printing processes are used to integrate non‐toxic KNbO3 layers with degradable carbon‐ or zinc‐based conductive inks into devices. The influence of electrode material on device characteristics is assessed, with effective piezoelectric coefficients reported as high as 4.6 pC N−1 and 5.1 pC N−1 for devices with carbon and zinc electrodes respectively. The potential of the developed technology is then demonstrated through the first‐ever instance of fully printed piezoelectric force sensors and acoustic speakers comprised entirely of green materials. By demonstrating entirely printable green piezoelectric devices compatible with various electrode materials, this work serves as a step towards developing more complex sustainable piezoelectric technologies in the future. [ABSTRACT FROM AUTHOR]

This paper aims to investigate a linguistic issue related to Sari Al-Deen Al-Durori (d. 1066 A.H), a renowned Arab linguist in the 11th century of the Islamic calendar. Despite being relatively unknown to modern scholars and researchers, this linguist has left behind a valuable knowledge legacy and held a significant scientific standing among his contemporaries. The focus of this study is on 'Baiti A-Raqmatain', a topic that has been subject to various interpretations by Arab linguists, including grammarians. In this paper, the author presents ten different perspectives addressing the problems in 'Baitia A-Raqmatain'. Additionally, the author introduces a syntactic interpretation and meaning, along with three new opinions that have not been previously discussed in the literature. I was inspired to write on this topic after reading several valuable manuscripts by renowned Arab scholars covering various areas of knowledge. Among them, I came across the works of Sari Al-Deen Al-Durori, an Arab intellectual who, in my opinion, has not received the recognition he truly deserves. Sari Al-Deen Al-Durori was a prominent scholar of the 11th Hijri century and has left behind a scientific heritage that is worthy of study and research. The study is divided into two sections. The first section focuses on discussing the author himself, including his background, birth and death dates, his jurisprudential and doctrinal school, scholarly reputation, influential teachers, disciples, and written works. Within this section, I also delve into the manuscript itself, examining its attribution to Sari Al-Deen, the author's methodology, language and style, as well as its form. I conclude this section with a comprehensive systematic review of the investigation. The second section of the study is dedicated to the transcription and documentation of the analyzed texts, including commentary, following commonly accepted investigation rules. I wrap up this section by providing a list of references used throughout the study. [ABSTRACT FROM AUTHOR]

Hemp hurd fiber, a low-value waste stream from the hemp industry, has potential downstream applications as an alternative to non-renewable plastics for single-use food service ware and packaging applications. Packaging paper substrates made from chemically pulped hemp hurd, mixed in varying ratios with bleached thermomechanical radiata pine pulp were developed and tested. Handsheets were characterized using several mechanical property tests including tensile strength, tearing resistance, burst strength, short-span compression, ring crush, together with Gurley air resistance, contact angle, and Cobb60 tests. Generally, addition of hemp hurd fibers significantly improved handsheet mechanical properties. Hot-pressing of the handsheets so as to approximate molded fiber thermoforming further enhanced their performance, with pure hemp hurd handsheets having the highest mechanical properties and barrier performance. A prototype was successfully thermoformed from hemp fiber, demonstrating overall feasibility of this fibre source for molded fibre objects. [ABSTRACT FROM AUTHOR]

Flow and spontaneous imbibition phenomena in porous media are important for various industrial applications, including printing and medical lateral flow assays. Their quantitative characterization is important to better understand and select the appropriate raw materials. However, standard methods often require time-consuming tests, and/or expensive equipment. Different time scales must be considered, limiting the range of possible characterization tools. A novel experimental approach based on image analysis for characterizing spontaneous imbibition processes is presented. Hence, ultra-fast diffusion may be quantitatively characterized. Models are issued from the literature to consider physical phenomena at small (milliseconds) and medium range (seconds) of time scales. The obtained experimental data fit with theoretical results, providing valuable insights into the understanding of fluid flow behavior at different time scales. Furthermore, the identification of some physical properties for either the fluid, or the substrate, based on the theoretical models are possible, as the contact angle, which remains to be otherwise challenging. This study contributes to bridging the gap between spontaneous imbibition and capillary phenomena at different time scales, their modeling, and a characterization of material and/or fluid properties paving the way for enhanced understanding and control of fluid behavior in porous media. Different papers are considered to illustrate the method. [ABSTRACT FROM AUTHOR]

Identifying the factors that influence the citation of articles helps authors improve the impact and reach of their research. Analysis of publications in the Journal of Fish Biology between 2008 and 2021 revealed that variables such as the number of keywords, abstract length, number of authors, and page length were associated with higher impact papers. These trends applied to both review and regular papers. These findings suggest that papers that are more informative, have higher numbers of authors, and have more keywords are more likely to be cited. Adoption of some simple "best‐practice" behaviors can improve the likelihood that a paper is cited. [ABSTRACT FROM AUTHOR]

The global overabundance of electronic waste and ever‐increasing concerns regarding the energy‐and material‐intensive manufacturing processes associated with traditional electronics are driving the development of solution‐processed, degradable electronics. Of note, the industry‐dominating prevalence of harmful lead‐based materials in sensing and actuating devices drives the push for more eco‐friendly solution‐processed piezoelectric systems. Yet current ecofriendly multi‐material printing processes are limited by both the conventional challenges of multilayer processes as well as the low‐temperature thermal constraints of biodegradable materials. Herein, a novel approach for fabricating fully printed, sustainable piezoelectric transducers on paper substrates is presented. Low‐temperature screen‐printing processes are used to integrate non‐toxic KNbO3 layers with degradable carbon‐ or zinc‐based conductive inks into devices. The influence of electrode material on device characteristics is assessed, with effective piezoelectric coefficients reported as high as 4.6 pC N−1 and 5.1 pC N−1 for devices with carbon and zinc electrodes respectively. The potential of the developed technology is then demonstrated through the first‐ever instance of fully printed piezoelectric force sensors and acoustic speakers comprised entirely of green materials. By demonstrating entirely printable green piezoelectric devices compatible with various electrode materials, this work serves as a step towards developing more complex sustainable piezoelectric technologies in the future. [ABSTRACT FROM AUTHOR]

This work presents the results of a transdisciplinary analysis performed on Harward's Almanac (Dublin, 1666), an extremely rare volume currently housed in the National Library of Ireland. The uniqueness and historical value of the Almanac is related to the presence of nineteen handwritten poems, entered by an anonymous scribe. These record textually important English clandestine satire circulating anonymously in Dublin in the late seventeenth and early eighteenth century. Following a comprehensive historical assessment, it appeared evident that the current order of leaves was incorrect. To reconstruct the correct order of the leaves, and hence the likely sequence in which the manuscript poems were inscribed, this study employed a codicological/paleographic analysis complemented by analytical (X-ray fluorescence, XRF) and statistical (Self Organizing Map, SOM) investigation. Specifically, point XRF analysis was carried out for each handwritten page of the Almanac, allowing identification of ink elemental compositions (iron-based ink) and successfully supporting the validity of historical hypotheses on the poems' order of inscription. The statistical organization of XRF data by SOMs allowed easy bi-dimensional visualization of the data set (54 points) and identification of ink similarities, once more validating the historical assessment. [ABSTRACT FROM AUTHOR]

The research presented in this paper introduces a novel environmental energy‐harvesting technology that harnesses electricity from the evaporation of water using porous structural materials. Specifically, a strategy employing paper‐based hydroelectric generators (p‐HEGs) is proposed to capture the energy produced during water evaporation and convert it into usable electricity. The p‐HEGs offer several advantages, including simplicity in fabrication, low cost, and reusability. To evaluate their effectiveness, the water evaporation‐induced electrical output performance of four different p‐HEGs are compared. Among the variants tested, the p‐HEG combining wood pulp and polyester fiber exhibits the best output performance. At room temperature, this particular p‐HEG generates a short‐circuit current and open‐circuit voltage of ≈0.4 µA and 0.3 V, respectively, thereby demonstrating excellent electrical stability. Furthermore, the electrical current and voltage generated by the p‐HEG through water evaporation are able to power an LED light, both individually and in series and parallel connections. This study delves into the potential of electricity harvesting from water evaporation and establishes it as a viable method for renewable energy applications. [ABSTRACT FROM AUTHOR]

Background. Physico-chemical modification of leather production waste opens up the possibility of their use, which reduces the environmental load on the environment. Purpose. Establishing a relationship between the components and strength of composite paper from modified leather and waste paper. Methodology. Modification of fibrous waste in an alkaline solution, differential thermal analysis, testing of physical and mechanical properties. Originality. An increase in the degree of leather cross-linking during the modification process was established, and the thermal and physical-mechanical properties of the composition were determined. Findings. Alkaline treatment of chrome shavings promotes the appearance of new polar groups and an increase in the degree of cross-linking of the product. The thermal effects of the leather-waste paperacrylic emulsion composite characterize the process of adhesion of the sizing agent to the fibers. [ABSTRACT FROM AUTHOR]

Subang Regency is designated as a pineapple commodity area due to the presence of natural resources, supporting facilities, and infrastructure. Pineapple harvest waste in the form of pineapple leaves is used by a local SME, Alfiber, as textile raw materials, such as yarn and cloth. However, there are still short fibre residues that cannot be utilized in the process. Through training activities for Alfiber members and the people of Cijambe Sub-district, Subang District, West Java, the ITB community service team provided an alternative solution for utilizing the short fibres of pineapple leaves by processing them into paper. This community service activity uses a qualitative approach consisting of four stages: the initial stage, preparation, activities, and results. The initial stage is preliminary research. The preparation stage and activities are participatory and educative and involve the ITB community service team, Alfiber, and the people of the Cijambe Sub-district. The results of the training activities prove that short fibres can be processed into paper using simple equipment and paper-making techniques such as moulding techniques. After participating in the activity, the participants succeeded in following the activity material and could make pineapple fibre paper independently. Even though it requires improvement in terms of quality, the paper can be produced into other products using paper as the primary material. [ABSTRACT FROM AUTHOR]

• BC/ZnO nanocomposite strengthens paper and improves aging resistance. • The nanocomposite imparts antifungal properties to paper. • The nanocomposite helps in deacidification of paper. Paper, commonly used as an information carrier, can become acidified and brittle over time. In this study, 0.3 % bacterial cellulose (BC) composite with 1.0% zinc oxide (ZnO) nanoparticles was prepared and used to coat brittle book paper for deacidification and consolidation. The BC/ZnO nanocomposite was characterized using zeta potential, micro morphology, elemental mapping, X-ray photoelectron spectra, Fourier transform infrared, and thermogravimetric analyses. The results indicated that the composite exhibited good stability. ZnO nanoparticles were bonded to the hydroxyl groups on BC, enhancing the thermal stability of BC. The composite was uniformly sprayed on the paper surface, and the mechanical properties, color difference, readability, pH, and micromorphology of the paper samples were examined before and after the treatment. The BC/ZnO nanocomposite exhibited good deacidification and consolidation effects on paper samples with low impact on the original paper appearance. Moreover, the BC/ZnO nanocomposite showed a good inhibitory effect on fungi growth on paper. [ABSTRACT FROM AUTHOR]

For many centuries, paper is the main material for recording cultural achievements all over the world. Infrared (IR) spectroscopy is an essential analytical tool for the structural analysis of paper and pulp chemistry. This review article introduced recent technical and scientific reports in terms of IR spectroscopy in the paper science and application, where interest had increased during the last couple decades (2000–2022). Five parts were described according to the application of IR spectroscopy: the analysis of cellulose and its derivatives, estimation the date of documents, identification the origins of fiber or paper, specification the chemical and physical properties of paper, and characterization the new materials of paper. [ABSTRACT FROM AUTHOR]

Purpose: The aim of the present paper to compare the cleaning treatments of paper samples exposed to artificial aging, toluene and isopropyl alcohol gel in cleaning wax stains. Design/methodology/approach: In total, paper samples were made from wood pulp. They had a deterioration phenomenon represented in the stains of the paraffin wax, so two types of cleaning were used: A traditional method using a toluene solution and another new method using isopropanol gel by a cotton swap in a circular movement until the completion of the cleaning process. Then, all paper samples were treated with toluene and isopropanol to handle the second artificial aging and detect how the samples were affected by artificial aging. For identifying the efficacy of these materials in removing paraffin wax stains, a range of examinations and analyses were used, such as universal serial bus, scanning electron microscope, infrared analysis (IR), pH analysis, color change analysis. Moreover, these results were compared with the standard sample's results. Findings: The results of examinations and analyses proved that the use of toluene affected the paper samples. Their effects were twice as weak, fragile and degraded paper fibers compared to isopropanol gel. Therefore, the isopropanol gel is preferred for paper cleaning to the toluene solution. Originality/value: This paper highlights the efficiency of isopropyl alcohol gel in cleaning wax stains from historical paper supports. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to find a suitable solution to treat the solidification paper by using hydroxypropyl cellulose (HPC) to improve the mechanical, physical and chemical properties of paper. Design/methodology/approach: The samples have gone several stages, starting with the manufacture of paper from the linen pulp and the same components of the hardened manuscript papers. It was subjected to artificial aging to reach an age comparable to the manuscript age, then it was subjected to natural aging by inoculation it with A. niger. Mechanical cleaning of the leaves was done with soft brushes. The samples have been consolidated by HPC 2%. Digital microscopy, scanning electron microscopy, mechanical properties measurement, color change, Fourier transform infrared and pH measurements were used to assess the effect of HPC on the qualities of leaves. Findings: HPC succussed in strengthening and restoring the natural, chemical and mechanical properties for the solidified leaves. Originality/value: The solidified papers phenomenon constitutes severe suffering for manuscripts and books conservators. The paper consolidation initial stage is one of the most important conservation stages because paper has lost many natural, mechanical and chemical properties. The most important feature of this study is providing a solution to the hardened leaves strengthening problem and restoring their chemical, natural and mechanical properties. [ABSTRACT FROM AUTHOR]

The pineapple leaves (PL) left over in the fields after pineapple harvest or burnt out, generate waste which contributes to the release of greenhouse gases. As pineapple is one of the most harvested crops in the world, the quantity of pineapple trash and its disposal methods are challenging. The composition of PL waste makes it unique to encounter the increasing demand for renewable energy and other useful products. This review is focused on the production of different biorefinery products and miscellaneous products from PL waste. The high cellulose content in PL makes it a potential feedstock for the production of different biorefinery products like bioethanol, oligosaccharides, nitrocellulose, and humic acid apart from this, waste is also useful for the production of different products like pineapple leaf fibres, fake eyelashes, organic leather, pulp and paper. Although the opportunities, future perspectives, and challenges concerning PL waste utilization to value-added goods were also addressed. It has been demonstrated that pineapple waste conversions lower waste creation, and the products produced by the conversion would promote the 'waste-to-wealth' notion. [ABSTRACT FROM AUTHOR]

Packaging waste makes up more than 10% of the landfilled waste in the United States. While consumers often want to make environmentally friendly product choices, we find that their perceptions of the environmental friendliness of product packaging may systematically deviate from its objective environmental friendliness. Eight studies (N = 4,103) document the perceived environmental friendliness (PEF) bias whereby consumers judge plastic packaging with additional paper to be more environmentally friendly than identical plastic packaging without the paper. The PEF bias is driven by consumers' "paper = good, plastic = bad" beliefs and by proportional reasoning, wherein packaging with a greater paper-to-plastic proportion is judged as more environmentally friendly. We further show that the PEF bias impacts consumers' willingness to pay and product choice. Importantly, this bias can be mitigated by a "minimal packaging sticker" intervention, which increases the environmental friendliness perceptions of plastic-only packaging, rendering plastic-packaged products to be preferable to their plastic-plus-paper-packaged counterparts. This research contributes to the packaging literature in marketing and to research on sustainability while offering practical implications for managers and public policy officials. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to find an applicable solution for the consolidation of petrified paper after disassembling it to complete other stages of treatment. Design/methodology/approach: The samples were subjected to natural aging by being inoculated with Aspergillus niger until they reached the stage of adhesion and petrification. After that, the leaves were separated, and cellulose nanocrystals were applied, then the leaves were subjected to wet thermal aging for 21 days. Digital microscope, scanning electron microscope, mechanical properties measurement, measurement of color change, Fourier transform infrared spectroscopy and pH measurement were used to evaluate the effects of the cellulose nanocrystal on paper. Findings: The results proved that cellulose nanocrystal (5%) successes consolidation of petrified paper Without affecting its natural, mechanical and chemical properties. Originality/value: This study was based on the effectiveness of cellulose nanocrystal in strengthening the petrified papers and testing its effect on the physical, mechanical and chemical paper properties. [ABSTRACT FROM AUTHOR]

Paper with simultaneous fire-resistance and hydrophobicity have greatly potential applications in the fields of packing, storage and delivering information, which attracts increasing attention recently. Different from the traditional cellulose-based paper which is extremely easily damaged by water and fire, a new type of highly flexible, fire-resistant and hydrophobic paper based on Si 3 N 4 nanowires and polydimethylsiloxane (PDMS) is reported. Specially, the Si 3 N 4 @PDMS core-shell nanowires with 3D interlocking structure are designed, in which the Si 3 N 4 nanowires act as the inorganic fire-resistant frameworks and the PDMS shell with low surface energy provides the hydrophobic surface. The Si 3 N 4 @PDMS core-shell nanowires are intertwined and interlaced to form a highly flexible Si 3 N 4 @PDMS paper. The tensile strength of Si 3 N 4 @PDMS paper is 6.19 MPa, indicating the good mechanical property. The obtained Si 3 N 4 @PDMS paper has the characteristics of writability, fire-resistance and hydrophobicity. The high thermal stability of Si 3 N 4 nanowires makes Si 3 N 4 @PDMS paper exhibit excellent fire resistance. No obvious change is observed for the commercial paper with Si 3 N 4 @PDMS paper as the fire-shielding layer after heating for 30 min. In addition, the contact angles of water droplets are all greater than 110° over the surfaces of Si 3 N 4 @PDMS paper after mechanical damages, chemical corrosions and thermal treatments. Si 3 N 4 @PDMS paper can be used in oil/water separation and oil collection. More importantly, Si 3 N 4 @PDMS paper can be used for writing without being damaged by fire or water. The present work may inspire the development and application of functional paper and is expected to become a breakthrough in the traditional paper industry. [ABSTRACT FROM AUTHOR]

The not-so-bygone worlds of music and colonialism in the twentieth century have yielded a wealth of scholarly 'paper knowledge' in the twenty-first of which to build off new archival-musicological work. This article takes a particular archiving direction by turning to paper itself – and pivots the postcolonial pen around the texts and textures of re-engaging colonial history in postcolonial music scholarship. I explore these writing stakes through my adopted narrative of 'the post/colonial music archive', as shaped by paper and paper's sounding elements of tone and voice. Crisscrossing between the colonial moment and the postcolonial pen, I straddle this developing narrative of the archive, and the registers and inflections of extant source narration for what they can jointly vocalize about the music making of the Municipal Brass Band in 1930s treaty port Shanghai, and the Sino-British Club in postwar colonial Hong Kong – two ostensible musical worlds of 'Britain in China' in the twentieth century, here thrown into disarray by the post/colonial archive's own inchoate, counter-tales. Ultimately, in this process, postcolonial music scholarship gains further traction and meaning as a multi-articulating inquiry – and a turn of mind that does not let colonial history and its persistent challenges for writing go askew. [ABSTRACT FROM AUTHOR]

This work reports on a facile 96‐microwell paper‐based colorimetric sensor array device (PCSAD) for highly accurate pH detection toward sweat analysis. Although a pH test strip has been widely used to easily visualize pH conditions with naked eyes, its accuracy to guarantee below the decimal point in pH changes has still been a concern. In contrast, the PCSAD could detect slight pH changes because of abundant chemical information by the array design. The color gradients on the PCSAD upon changing pH conditions can be rapidly recorded by a flatbed scanner. The captured digital images of the PCSAD were treated with imaging analysis, followed by extraction of color intensities for inset data. By employing the partially overlapped detectable pH ranges of pH indicators, seamless inset data was obtained. Therefore, the PCSAD successfully discriminated against slight changes in pH conditions in human sweat with high accuracy by pattern recognition methods. [ABSTRACT FROM AUTHOR]

Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion even when it cooled down, but only if the concentration of nanofibers was high enough. This required concentration (0.6–0.9 wt%) depended on the degree of oxidation of the cellulose nanofibers. Rheological hindrance was essential to prevent the buoyancy of beeswax particles, while the presence of glycerol prevented excessive aggregation. The mixtures had yield stress and showed pseudoplastic behavior at a high enough shear rate, with their apparent viscosity being positively influenced by the surface charge density of the nanofibers. When applied to packaging paper, the nanocellulose-stabilized beeswax suspensions not only enhanced its barrier properties towards liquid water (reaching a contact angle of 96°) and water vapor (<100 g m−2 d−1), but also to grease (Kit rating: 5) and airflow (>1400 Gurley s). While falling short of polyethylene-coated paper, this overall improvement, attained using only one layer of a biobased coating suspension, should be understood as a step towards replacing synthetic waxes and plastic laminates. [ABSTRACT FROM AUTHOR]

The coefficient of friction for different contacting materials against skin is mainly influenced by the nature of the materials (synthetic and natural fabrics), mechanical contact parameters (interfacial pressure and sliding velocities), and physiological skin conditions (ambient humidity and skin moisture content). In the present research work, seven different types of papers used in everyday life were analyzed. The physical properties of these materials were determined through tensile tests and friction tests. By comparing mechanical properties with coefficient of friction, it was possible to conclude that the coefficient of friction is strongly correlated with the mechanical properties. [ABSTRACT FROM AUTHOR]

Most methodologies to measure the moisture‐induced deformation (hygro‐expansion) of paper microconstituents, including fibres and interfibre bonds, are low resolution or time‐consuming. Hence, here, a novel method is proposed and validated to measure high‐resolution full‐field strain maps of paper microconstituents during hygro‐expansion, based on environmental scanning electron microscopy (ESEM). To this end, a novel climate stage enables accurate control of the relative humidity (RH) near the specimen in the ESEM from 0%–100%. The fibre surface, which is decorated a priori with a microparticle pattern, is captured during RH change. Subsequently, correlating the fibre surface using a dedicated global digital image correlation algorithm enables high‐resolution hygro‐expansion strain maps. Method optimisation involved performing contrast enhancement, scan‐correction to reduce ESEM artefacts and a background correction, resulting in a strain resolution of 6·10−4. Method validation revealed that the fibres' crystallinity is affected by the electron beam, even for minimal invasive electron beam settings. Interestingly, however, the fibres consistently exhibit conventional hygro‐expansion behaviour during the drying slopes. Using the optimised procedure, hygro‐expansion characterisation of two interfibre bonds and four interfibre bond cross‐sections revealed the competition between the low longitudinal and large transverse fibre hygro‐expansion in the bonded area. [ABSTRACT FROM AUTHOR]

Four photochromic spiropyran‐amylose (ASP) biobased polymers with different spiropyran (SP) grafting density, DS, ASP10 (DS = 0.12), ASP40 and ASP40PA60 (DS = 0.40), and ASP100 (DS = 0.97), are synthesized through azide‐alkyne cycloaddition of an alkynyl‐functional SP derivative onto C6‐azidated‐amylose (AN3), where the unconverted azide in ASP40PA60, ASP100, and the AN3 precursor are quenched by clicking with propargyl alcohol (PA). All ASPs are poorly soluble in trifluoroethanol, ethanol, and water but soluble in dimethyl sulfoxide, N,N‐dimethylformamide, and hexafluoroisopropanol irrespective of UV irradiation, switching reversibly the grafted SP into zwitterionic merocyanine (MC). Only ASP10 and ASP40 are slightly soluble in the low polarity tetrahydrofuran, with ASP40 showing a marked photochromism and reduction of solubility on SP→MC switching. The photochromism in solution is preserved in the solid state, although with significant differences between the still relatively fast SP→MC photoisomerization and the much slower thermal retro‐isomerization. The dynamics of both processes, evaluated in a thin spin–coated ASP100 film and a thicker ASP40 photoswitchable coating on glass and paper, is more clearly affected than in solution by the grafting density. Switching the nearly apolar SP into the zwitterionic MC does not significantly affect wettability of the slightly hydrophobic ASP40 coating. [ABSTRACT FROM AUTHOR]

In this article we study the particularities of editorial practice in contexts of confinement in Argentina through the systematization and analysis of five publications, already published or in the process of being published, which were formulated within the framework of pedagogical-political practices carried on by the Prisons Extension Program of the Philosophy and Literature Faculty of the University of Buenos Aires. These five cases will be addressed in order to observe what meanings guide the editorial processes through the marks imprinted on them by the specificity of the writing that summons them and the territory to which they belong. Publishing in the context of a pedagogical project developed by the university configures collective territories where writing and publications can display and carry plural voices, which are strengthened in that plurality forged in the heat of individual and collective subjectivation processes made possible by education and writing. Editorial practice is inseparably intertwined with actions aimed at defending rights, narrating lived experiences and building a collective history which are part of the desires and expectations regarding publication. [ABSTRACT FROM AUTHOR]

Purpose: Paper aims to determinate caking paper manuscript cause through studying of the manuscript components, bio-deterioration and physio-chemical deterioration factor. It will facilitate manuscripts and paper conservators to understand paper blocking and caking phenomenon. Design/methodology/approach: The manuscript condition has been diagnosed by focusing on adhesion and fossilization regions. To achieve this, some methods of analysis and examination were used, such as visual examination, digital microscopy and scanning electron microscope were used to studying surface changes. X-ray diffraction and Fourier transform infrared microscopy were used to determinate of cellulose crystallinity, ink composition and identify the binding medium. Findings: The results revealed the use of cotton pulp, and calcium carbonate was among the fillers that were used to improve the properties of paper. The crystallization of cellulose was lower in the first and last papers than the papers located in the heart of the manuscript. The most important reasons that led to the papers caking was the presence of fungi A. niger, Cladosporium sp, Chaetomium sp, by secreting some enzymes in combination with some other factors such as difference variation in temperature and moisture. Originality/value: All deterioration factors participate with each other until rule the damage circle of the papers because one factor alone cannot stick the papers. It was inferred from the examinations and analyzes that were conducted for the samples. [ABSTRACT FROM AUTHOR]

Wood-based paper fibers are inherently biodegradable. In contact with moist soil and in compost, papermaking fibers are readily broken down by soil microbes. Resistance to biodegradation is needed, as paper is used for special applications such as mulching in agriculture and forestry, the coating of construction materials, and for packing and wrapping under conditions where packaging materials may be exposed to contact with moist soil or other type microbial active contamination. A preceding study showed that paper chemical crosslinking with glyoxal, citric acid (CA), or methylated 1,3-dimethylol-4,5-dihydroxyethylene urea (mDMDHEU) results in substantially improved paper wet strength and lower paper water absorbency. The present study examined the efficiency of chemical crosslinking treatments with CA and with mDMDHEU to decrease the biodegradation rate of laboratory paper sheets and a sack paper, both made of kraft fibers. The biodegradation was examined using a 48-h enzymatic degradation test and a 2-month soil burial test. The results indicate that chemical crosslinking is an effective non-biocidal method for making sulphate kraft paper more resistant to biodegradation. In some end-uses, improved resistance to biodegradation, along with improved paper wet performance, can enhance paper performance comparable to plastic films. [ABSTRACT FROM AUTHOR]

Paper, which is in fact a very complex cellulose-based product derived from different lignocellulosic resources, is usually regarded as a simple omnipresent commodity in our lives. Wood fibers derived from trees are the most employed sources for papermaking purposes. From an environmental protection perspective, and for their essential role in our life (they give us the life itself through their foliar system supporting the photosynthesis process), trees should not be extensively cut down and they should be used less and less for papermaking. Thus, employment of non-woody alternative sources for papermaking could be exploited more as an attractive and feasible option. [ABSTRACT FROM AUTHOR]

This essay explores the material imperatives of nineteenth-century statistical ambition, at a time when the nature of paper itself underwent rapid change. It expands the concept of paper technologies to include knowledge about the materials themselves, as well as the infrastructures, techniques, and agreements that made it possible for the right kind of paper to be made available for particular purposes. Taking the production of the forms for the Prussian census as a case in point, it argues that the enumeration effort of Prussian census statisticians went far beyond designing a form, collecting information, noting and compiling figures, or creating tables. Paper knowledge to define and control the material substance of the forms mattered as much as political impetus and statistical methods in getting the census right. [ABSTRACT FROM AUTHOR]

This article presents results on the use of a new material as a solidifying agent and/or color-fixing agent. A special polysaccharide material extracted from the prickly pear cactus (Opuntia ficus indica) was tested on historical materials and modern papers. An old book from the 18th century was chosen as historical material. From the mentioned book 42 pages were taken, on which a conservation and restoration pretreatment was performed before applying the polysaccharide material: sampling, fiber analysis, dry cleaning, ink solubility, pH test, thickness measurement and wet cleaning. The paper sheets provided for the test were divided into 4 groups, 3 of which were treated with gel and one left untreated as a reference. The division into groups is not only due to the different method of application, but also due to the process of gel extraction. The effect of the treatment was analyzed using FTIR-ATR. To test the mucilage as color-fixing agent 2 samples were prepared using watercolor papers colored with 6 different watercolors applied to 2.5 cm2 samples for each color in two rows of different intensity. One of the 2 samples was treated with gel, but both were immersed for 3 times in a water-ethanol solution for approximately 20 min as is standard practice in conservation and restoration. After washing, both specimens were subjected to colorimetric analysis to assess their differences. The results provided satisfactory evidence for the protection of paints sensitive to aqueous treatments and suggest the use of mucilage as a new material in cleaning method for water-soluble media. [ABSTRACT FROM AUTHOR]

The dominance of plastics in the packaging market is due to their low weight and thickness, which save transportation costs. However, their non-biodegradability poses a significant threat to the environment. Paper, on the other hand, is considered as a safer alternative due to its natural composition and biodegradability. The porous structure of paper limits its application in packaging, and its poor water resistance further restricts its use in humid environments. Therefore, lamination is a method useful tool to improve the barrier properties of paper. Additionally, the researchers are focusing on developing biodegradable and water-based coatings with anti-fat properties as a green alternative to plastic packaging. The impact of a new grease-resistant coating composed of starch, gelatin and sodium alginate on the mechanical properties of paper was investigated through tensile, tearing, and bursting strength tests. The results showed significant improvements in the mechanical properties of the coated paper sheets. Furthermore, the biodegradability test indicated that the paper samples coated with the new composition showed a 50% weight loss after one week of incubation in the soil, and after three weeks, they exhibited 100% weight loss, demonstrating their outstanding biodegradability. [ABSTRACT FROM AUTHOR]

Plant-fibre ancient-books with cultural significance should be protected from moisture and pollution. In this work, a strategy of surface in-situ protection (building composite coating) was adopted to achieve good hydrophobicity, moisture-proofness and ink-contamination resistance at the surface of archaistic paper. By pre-ring opening of epoxy-based poly(vinyl silsesquioxane) (POSS) and spray of POSS/polyvinylidene fluoride (PVDF) mixed solution, in-situ construction of POSS/PVDF composite coating at the surface of ancient paper was achieved. Compared to water-absorbing ancient paper, POSS/PVDF co-modified ancient paper shows strong humidity resistance. The surface of co-modified ancient paper (epoxy-group pre-ring opening for 45 min) displays high hydrophobicity (water contact angle of ~142.6°), ascribed to greatly improved surface roughness of paper fibres as well as complete coverage of high-content Si/F elements on fibre surface. POSS-modified and neat ancient-paper materials show surface water contact angles of ~113.9° and 0°, respectively. Robust ink-resistance of POSS/PVDF co-modified ancient-paper surface is realized. The innovation in this work lies in perfect synergy of cage-shaped POSS and threadlike PVDF in coating. This work might open a way for surface nondestructive-protection to ancient-books for damp-proof, hydrophobic and anti-fouling characteristics. [ABSTRACT FROM AUTHOR]

The present study reports on the development by thermoforming of highly sustainable trays based on a bilayer structure composed of paper substrate and a film made of a blend of partially bio-based poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA). The incorporation of the renewable succinic acid derived biopolyester blend film slightly improved the thermal resistance and tensile strength of paper, whereas its flexural ductility and puncture resistance were notably enhanced. Furthermore, in terms of barrier properties, the incorporation of this biopolymer blend film reduced the water and aroma vapor permeances of paper by two orders of magnitude, while it endowed the paper structure with intermediate oxygen barrier properties. The resultant thermoformed bilayer trays were, thereafter, originally applied to preserve non-thermally treated Italian artisanal fresh pasta, "fusilli calabresi" type, which was stored under refrigeration conditions for 3 weeks. Shelf-life evaluation showed that the application of the PBS–PBSA film on the paper substrate delayed color changes and mold growth for 1 week, as well as reduced drying of fresh pasta, resulting in acceptable physicochemical quality parameters within 9 days of storage. Lastly, overall migration studies performed with two food simulants demonstrated that the newly developed paper/PBS–PBSA trays are safe since these successfully comply with current legislation on plastic materials and articles intended to come into contact with food. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of a hundred and one handwritten essays by master students in Informatics. The students reflected on their experiences of working with pen and paper for reading and writing as a mandatory assignment for the duration of a five-week intensive course. Taking an inductive approach, reflexive thematic analysis was used to identify patterns of meaning across the full dataset. The essays elicited insightful student reflections on learning, knowing, and being. One overarching theme, New connections, and four sub-theses were identified: Handwriting as note making, Being present for learning, Freedom to think, and Materiality of reading and writing. This study contributes to an improved understanding of the affordances of paper and laptops in the lecture room, based on a student-centred approach, and reflects on how student perspectives can be implemented during lectures. [ABSTRACT FROM AUTHOR]

The identification of sustainable materials as an alternative to plastic is fundamental for the protection of the environment and for the safeguard of marine ecosystems. The replacement of plastic with organic materials for fish storage might affect its shelf-life due to the high concentration of oxidizable fatty acids in fish flesh. This study investigated the effectiveness of two organic packaging materials, namely coconut fiber (Coc) and paper (Pap), as alternatives to the conventionally used polystyrene (Pol), on the shelf-life, hygienic parameters, and quality traits of anchovies refrigerated for one (T0), three (T1), or seven (T2) days. The hygienic quality of anchovies packaged in the organic Pap and Coc boxes was better than the traditional Pol, probably due to the higher porosity of the packaging, which allows a higher bacterial proliferation. Results of the T-BARS test showed a lower (p < 0.05) malondialdehyde concentration in fillets from the Pap group, which increased (p < 0.05) from the first to the seventh day of storage. The polyunsaturated fatty acids concentration did not differ between groups, but it decreased (p < 0.05) from T0 to T2. Coconut fiber and paper are worthy of further investigation since these packaging materials did not affect the shelf-life and fatty acid profile of anchovies during storage. [ABSTRACT FROM AUTHOR]

Background: There are a variety of costs associated with publication of scientific findings. The purpose of this work was to estimate the cost of peer review in scientific publishing per reviewer, per year and for the entire scientific community. Methods: Internet-based self-report, cross-sectional survey, live between June 28, 2021 and August 2, 2021 was used. Participants were recruited via snowball sampling. No restrictions were placed on geographic location or field of study. Respondents who were asked to act as a peer-reviewer for at least one manuscript submitted to a scientific journal in 2020 were eligible. The primary outcome measure was the cost of peer review per person, per year (calculated as wage-cost x number of initial reviews and number of re-reviews per year). The secondary outcome was the cost of peer review globally (calculated as the number of peer-reviewed papers in Scopus x median wage-cost of initial review and re-review). Results: A total of 354 participants completed at least one question of the survey, and information necessary to calculate the cost of peer-review was available for 308 participants from 33 countries (44% from Canada). The cost of peer review was estimated at $US1,272 per person, per year ($US1,015 for initial review and $US256 for re-review), or US$1.1–1.7 billion for the scientific community per year. The global cost of peer-review was estimated at US$6 billion in 2020 when relying on the Dimensions database and taking into account reviewed-but-rejected manuscripts. Conclusions: Peer review represents an important financial piece of scientific publishing. Our results may not represent all countries or fields of study, but are consistent with previous estimates and provide additional context from peer reviewers themselves. Researchers and scientists have long provided peer review as a contribution to the scientific community. Recognizing the importance of peer-review, institutions should acknowledge these costs in job descriptions, performance measurement, promotion packages, and funding applications. Journals should develop methods to compensate reviewers for their time and improve transparency while maintaining the integrity of the peer-review process. [ABSTRACT FROM AUTHOR]

An awareness of the problems associated with the use of plastics can provide new opportunities for the paper industry. We have to try to enhance the public awareness of the environmental value of papers by using diverse advertising approaches. We have to collaborate to make paper more viable to replace plastics in many uses. The collaboration not only between industry and academia but also between countries and associations is essential to advance the age of paper. [ABSTRACT FROM AUTHOR]

Biological degradation of documentary heritage is a serious issue faced by libraries, museums and archives as it can lead to paper becoming brittle, fragile and discoloured, resulting in a loss of information. This study investigates the impact of didecyldimethylammonium bromide (DDAB) on the properties of pure or inked paper and the growth of different types of fungi. Three fungi species known for their ability to cause paper biodete-rioration in libraries and museums, Aspergillus clavatus Desm, Penicil-lium paneum Frisvald and Ulocladium chartarum Preuss, were selected for the DDAB salt antifungal activity test. The study measured the pH and degree of polymerization (DP), monitored colour changes and conducted scanning electron microscopy analyses (SEM) to confirm that DDAB can be used as a biocide for fungi on pure or inked paper. The study also investigated the antifungal effect of DDAB on paper treated with different types of ink, including black (iron-gall ink) and brown (copper ink). Didecyldi-methylammonium bromide (DDAB) can be used as a biocide for cleaning and preserving paper documents, with active concentrations of 0.7 and 1%. [ABSTRACT FROM AUTHOR]

A small framed display panel holds a selection of paper and media common in works on paper plus a set of Blue Wool Standards. The selection of materials and design of the panel including two types of glazing are presented, and the purpose of the panel as a tool for explaining the effects of light on materials is discussed. At the centre of the panel are watercolour samples prepared using primary colours in mixed washes that illustrate hue shift resulting from selective fading of one colourant. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop bio-based adhesives that can be used for various packaging papers. In addition to commercial paper samples, papers produced from harmful plant species in Europe, such as Japanese Knotweed and Canadian Goldenrod, were used. In this research, methods were developed to produce bio-based adhesive solutions in combinations of tannic acid, chitosan, and shellac. The results showed that the viscosity and adhesive strength of the adhesives were best in solutions with added tannic acid and shellac. The tensile strength with adhesives of tannic acid and chitosan was 30% better than with commercial adhesives and 23% for combinations of shellac and chitosan. For paper from Japanese Knotweed and Canadian Goldenrod, the most durable adhesive was pure shellac. Because the surface morphology of the invasive plant papers was more open and had numerous pores compared to the commercial papers, the adhesives penetrated the paper structure and filled the voids. There was less adhesive on the surface and the commercial papers achieved better adhesive properties. As expected, the bio-based adhesives also showed an increase in peel strength and exhibited favorable thermal stability. In summary, these physical properties support the use of bio-based adhesives use in different packaging applications. [ABSTRACT FROM AUTHOR]

Paper is widely used as a packaging material because it is biodegradable and completely safe for the environment. The use of antimicrobials as a coating on paper can improve its mechanical, optical, physical and antimicrobial properties. Antimicrobial packaging suppresses the development of pathogenic microorganisms in order to ensure the safety of the product, extend the shelf life and protect the quality of the product. Giving antibacterial properties to papers and cardboards expands their use in different areas and for different purposes. Antibacterial paper prevents the entry and development of harmful microorganisms such as bacteria, fungi, mould. Antimicrobials that occur naturally in nature have a number of advantages, as they are considered to pose less risk to the consumer. One of the modern directions in research is the inclusion of different types of active substances in the packaging material, which can give it additional functions, such as elimination of oxygen, moisture, ethylene, ethanol emission, antimicrobial activity and others. The present work aims to obtain plant extracts, their characterization and their surface application on paper. Extracts of Bulgarian herbs St. John's wort, cumin, rosemary, thyme and basil were obtained and characterized and studied. Plant extracts are applied by spraying on the surface of various papers. The antimicrobial effect of treated papers on gram-positive and gram-negative bacteria was studied. The results of the analysis of the obtained papers show the possibility of using plant extracts containing biologically active ingredients for the production of papers with barrier properties. The use of plant extracts is a promising and innovative solution. [ABSTRACT FROM AUTHOR]

The main aim of the present research is to examine the effect of progressive deinking and reprinting on the paper properties of inkjet-printed paper. A typical office copy paper was selected as the base paper and printed using an inkjet printer having at least 50 % ink coverage. Thereafter, it was deinked and reprinted thrice, and its paper properties were measured. The paper properties that were measured were roughness, porosity, opacity, brightness, specular gloss, whiteness, bursting strength, tearing resistance, tensile strength, contact angle, deinkability efficiency, visible dirt area, ink elimination factors, and color differences. The results showed that in comparison to the base paper, the progressively deinked and reprinted paper samples showed an increase in roughness, porosity, opacity, tearing resistance, dirt area, and color difference. On the other hand, there was a decrease in brightness, gloss, whiteness, burst strength, tensile strength, contact angle, deinkability efficiency, and ink elimination factors. The experiment shows that the progressively deinked and reprinted papers can be compared to the base paper in the major paper properties. [ABSTRACT FROM AUTHOR]

A novel paper multifunctional protective solution was prepared by mixing berberine modified trimethoprimed carboxymethyl cellulose (TMP-DCMC-BBR), KH-791 modified nano-SiO2 (KH791-SiO2) and hydroxypropyl starch phosphate (HPDSP), and the mechanical properties, optical properties, antibacterial properties, aging resistance, acid and alkali resistance of the paper coated with the protective solution were investigated. It is shown that the paper coated with the multifunctional protective liquid showed good mechanical properties, and has little influence on optical properties of the paper. At the same time, it had good antibacterial properties, aging resistance and acid and alkali corrosion resistance, and there is no obvious change in paper appearance, no decolorization and ink diffusion, which is in line with the principle of "repairing the old as the old and keeping the original appearance". Moreover, the compound solution has certain reversibility and can absorb a certain degree of ultraviolet rays, so as to weaken the damage of ultraviolet rays to the paper. It is an ideal multifunctional protective liquid for paper and has broad application prospects in paper protection. [ABSTRACT FROM AUTHOR]