Search

Abstract: In this paper we describe the concept and in vivo results of a minimally invasive, chip-based near infrared (NIR) sensor, combined with microdialysis, for continuous glucose monitoring. The sensor principle is based on difference absorption spectroscopy in selected wavelength bands of the near infrared spectrum (1300nm, 1450nm, and 1550nm) in the 1st overtone band. In vitro measurements revealed a linear relationship between glucose concentration and the integrated difference spectroscopy signal with a coefficient of determination of 99% in the concentration range of 0–400mg/dl. The absolute error in this case is about 5mg/dl, corresponding to a relative error of about 5% for glucose concentrations larger than 50mg/dl and about 12% in the hypoglycemic range (<50mg/dl). In vivo measurements on 10 patients showed that the NIR-CGM sensor data reflects the blood reference values adequately, if a proper calibration and a signal drift correction is applied. The mean MARE (mean absolute relative error) value taken over all patient data is 13.8%. The best achieved MARE value is at 4.8%, whereas the worst lies at 25.8%, leading to a standard deviation of 5.5%. [Copyright &y& Elsevier]

This paper presents the concept of a novel adaptable sensing solution currently being developed under the EU Commission-founded PHOTONGATE project. This concept will allow for the quantification of multiple analytes of the same or different nature (chemicals, metals, bacteria, etc.) in a single test with levels of sensitivity and selectivity at/or over those offered by current solutions. PHOTONGATE relies on two core technologies: a biochemical technology (molecular gates), which will confer the specificity and, therefore, the capability to be adaptable to the analyte of interest, and which, combined with porous substrates, will increase the sensitivity, and a photonic technology based on localized surface plasmonic resonance (LSPR) structures that serve as transducers for light interaction. Both technologies are in the micron range, facilitating the integration of multiple sensors within a small area (mm2). The concept will be developed for its application in health diagnosis and food safety sectors. It is thought of as an easy-to-use modular concept, which will consist of the sensing module, mainly of a microfluidics cartridge that will house the photonic sensor, and a platform for fluidic handling, optical interrogation, and signal processing. The platform will include a new optical concept, which is fully European Union Made, avoiding optical fibers and expensive optical components. [ABSTRACT FROM AUTHOR]