Search

This study investigates the dielectric properties of conductive biocomposites (CBs), which are integral to the development of advanced materials for flexible electronics and medical devices. A novel method employing Microwave Reflectometry (MR) is introduced, utilizing a miniaturized Vector Network Analyzer (m-VNA) and a dedicated sensing element (SE), to extract the dielectric properties of CBs. The method is grounded in a minimization principle, aligning the measured S 11 reflection scattering parameter with its electromagnetic (EM) simulation, facilitating a refined process for determining the dielectric properties. The experimental setup was meticulously engineered, optimized, and validated using reference dielectric samples (RDSs) with known dielectric properties. The method was then applied to three innovative CBs, resulting in an accurate extrapolation of their dielectric properties. The findings highlight the method's versatility, cost-efficiency, and applicability to ultra-thin and flexible biopolymer films, offering significant potential for advancements in flexible electronics and bio-sensing applications. [ABSTRACT FROM AUTHOR]

In the treatment of obesity, nutritional and behavioral modifications are difficult to implement and maintain. Since vegetable consumption is a fundamental part of many dietary interventions and daily nutrient requirements, we developed a novel cellulose-based superabsorbent hydrogel (CB-SAH) platform, inspired by the composition and mechanical properties of raw vegetables, as a mechanobiological therapy. The CB-SAHs properties were studied in a simulated gastrointestinal environment, while their impact on gut tissue was investigated by an ex vivo organ culture (EVOC) model. Functional fibers and raw vegetables were used as reference. CB-SAHs demonstrated orders of magnitude higher elasticity in comparison to the tested functional fibers, however performed similar to the tested raw vegetables. Notably, the biomimetic CB-SAHs with elasticity levels similar to raw vegetables showed benefits in preserving and regulating the gut tissue in the EVOC model. Non-systemic oral mechanotherapeutics based on this technology were advanced through clinical studies, with a first product cleared as an aid for weight management in the US and Europe. [ABSTRACT FROM AUTHOR]

Alginate micro beads containing Lactobacillus kefiri (the principal bacteria present in the kefir probiotic drink) were produced by a novel technique based on dual aerosols spaying of alginate based solution and CaCl 2 as cross linking agent. Carboxymethylcellulose (CMC) has been also added to the alginate in order to change the physic-chemical properties (viscosity and permeability) of the microbeads. Calcium alginate and CMC are biopolymers that can be used for developing oral drug-delivery systems. These biopolymers have been reported to show a pH-dependent swelling behaviour. Calcium alginate and CMC have also been known to possess an excellent mucoadhesive property. The loaded microbeads have been characterized in terms of morphology, chemical composition and stability in different conditions mimicking the gastric environment. In this study, we demonstrate the feasibility of a continuous fabrication of alginate microbeads in a range of 50–70 μm size, encapsulating L. kefiri as active ingredient. The technique involves the use of a double aerosols of alginate based solution and CaCl 2 as crosslinking agent. Moreover, the encapsulation process was proved to be effective and not detrimental to bacteria viability. At the same time, it was verified the protective efficacy of the microcapsules against the gastric environment using both SGF pH 1.2 (fasted state) and pH 2.2 (feed state). [ABSTRACT FROM AUTHOR]

Bioactive food-preserving materials are based on the use of a natural antimicrobial compound loaded in a carrier material, which is able to trigger its release when requested and to modulate the rate of release, thus using either toxic or inhibitory properties against pathogens or bacteria due to food decomposition. In this study, the Schiff base formation for chitosan functionalization was achieved by the reaction of chitosan with cinnamaldehyde at different concentrations. Cinnamaldehyde is an aromatic α,β-unsaturated aldehyde, and the major component in essential oils from some cinnamon species. It has been shown to exert antimicrobial action against a large number of microorganisms including bacteria, yeasts, and mould. The formation of the Schiff base is reversible under suitable conditions, and this might allow the release of the active cinnamaldehyde from chitosan, used as the carrier. The reaction kinetics was investigated by means of rheological measurements, while infrared spectroscopy was used to assess the efficacy of the functionalization. The addition of nanometric graphene stacks to the cinnamaldehyde-functionalized chitosan films was evaluated with the aim to increase the mechanical properties of the film. Finally, the films were tested for antifungal properties with bread slices against a selected mould line. [ABSTRACT FROM AUTHOR]

In this study, free-standing expanded graphite chitosan (EG-chitosan) nanocomposite films have been prepared using a novel green and simple preparation method, starting from a commercial expandable graphite (GIC). The in situ exfoliation of GIC by a solvent-free sonication method was monitored as a function of the process parameters using X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS) and UV-visible transmittance (UV-VIS) analyses. The optimal process parameters were selected in order to obtain an efficient dispersion of EG in chitosan solutions. The effective EG amount after the in situ exfoliation was also determined by thermogravimetric analyses. [ABSTRACT FROM AUTHOR]

IRCCS Humanitas Research Hospital, Via Manzoni 56, 20089, Rozzano, Milan, Italy Department of Biomedical Sciences, Humanitas University, Via Rita Levi Montalcini 4, 20072 Pieve Emanuele, Milan, Italy The original Article and accompanying Supplementary Information file have been corrected. The correct affiliation is listed below: IRCCS Humanitas Research Hospital, Via Manzoni 56, 20089, Rozzano, Milan, Italy In addition, an affiliation for Maria Rescigno was omitted. [Extracted from the article]

The correct affiliation is listed below: IRCCS Humanitas Research Hospital, Via Manzoni 56, 20089, Rozzano, Milan, Italy In addition, an affiliation for Maria Rescigno was omitted. IRCCS Humanitas Research Hospital, Via Manzoni 56, 20089, Rozzano, Milan, Italy Department of Biomedical Sciences, Humanitas University, Via Rita Levi Montalcini 4, 20072 Pieve Emanuele, Milan, Italy The original Article and accompanying Supplementary Information file have been corrected. [Extracted from the article]

Phantoms are commonly used to perform several tasks within the field of medical imaging and radiation therapy. A novel approach to the manufacture of polymeric phantom for tissue mimicking applications by means of stereolithography (SL) is presented. A water solution of polyethylene glycol diacrylate (PEGDA) and a blend of proprietary photoinitiators were used. An SL device was modified with a custom designed elevator-driven build table with the aim of reducing the material volume during the building process. The second step of this work was addressed to the manufacture of a prototype mimicking a simplified vascular system. The prototype was drawn using a computer-aided-design package and the resulting geometric data were used to drive the SL process leading finally to the fabrication a PEGDA phantom. A preliminary echographic study was also carried out to verify the phantom suitability for in in vitro ultrasound contrast agent characterization. [ABSTRACT FROM AUTHOR]

Periodontitis is a global, multifaceted, chronic inflammatory disease caused by bacterial microorganisms and an exaggerated host immune response that not only leads to the destruction of the periodontal apparatus but may also aggravate or promote the development of other systemic diseases. The periodontium is composed of four different tissues (alveolar bone, cementum, gingiva, and periodontal ligament) and various non-surgical and surgical therapies have been used to restore its normal function. However, due to the etiology of the disease and the heterogeneous nature of the periodontium components, complete regeneration is still a challenge. In this context, guided tissue/bone regeneration strategies in the field of tissue engineering and regenerative medicine have gained more and more interest, having as a goal the complete restoration of the periodontium and its functions. In particular, the use of electrospun nanofibrous scaffolds has emerged as an effective strategy to achieve this goal due to their ability to mimic the extracellular matrix and simultaneously exert antimicrobial, anti-inflammatory and regenerative activities. This review provides an overview of periodontal regeneration using electrospun membranes, highlighting the use of these nanofibrous scaffolds as delivery systems for bioactive molecules and drugs and their functionalization to promote periodontal regeneration. [ABSTRACT FROM AUTHOR]

Simple Summary: The enormous demand for swabs for clinical use that has characterised recent years, together with the need to develop effective, eco-friendly, and low-cost strategies for their production, has driven nanotechnological research to the development of new manufacturing processes. In this context, electrospinning represents a promising solution as it guarantees broad control in terms of fibre size and porosity and good scalability of the production process. In this study, this technique was chosen for the fabrication of biodegradable polymeric membranes to be used for the manufacture of swab tips. The electrospun mats thus obtained were characterised, and the prototype swab thus assembled was investigated in its uptake and release properties. Furthermore, the use of this prototype for the collection of bacteriological samples was preliminarily evaluated. The in vitro tests revealed a good potential, comparable to those of commercial foam swabs adopted as the reference standard and hopefully replaceable by the manufactured prototype. In recent years, the enormous demand for swabs for clinical use has promoted their relevance and, consequently, brought the environmental issues due to their single use and lack of biodegradability to the attention of the healthcare industry. Swabs consist of a stick that facilitates their easy handling and manoeuvrability even in complex districts and an absorbent tip designed to uptake and release biological samples. In this study, we focused on the fabrication of an innovative biodegradable poly(vinyl alcohol) (PVA) nanofiber swab tip using the electrospinning technique. The innovative swab tip obtained showed comparable uptake and release capacity of protein and bacterial species (Pseudomonas aeruginosa and Staphylococcus aureus) with those of the commercial foam-type swab. In this way, the obtained swab can be attractive and suitable to fit into this panorama due to its low-cost process, easy scalability, and good uptake and release capabilities. [ABSTRACT FROM AUTHOR]

Abstract Focused on biomedical applications of thermo-responsive polymers, low-doses of gamma radiation from a 60Co source were applied in a simple one-pot method to synthesize graft copolymers of alginate and poly(N-isopropylacrylamide) (PNIPAAm) with different compositions. The molar percentage of grafted NIPAAm (% molar NIPAAm) was determined by thermogravimetric analysis (TGA) and elemental analysis (EA), being the copolymer structure-property relationship studied in terms of thermo-associative and rheological behavior in aqueous solutions. The addition of more NIPAAm monomer in the initial mixture of reaction, as well as, increasing absorbed dose lead to a greater grafting. However, increasing radiation dose produces copolymers with diminished viscoelastic properties caused by the alginate backbone scission. From rheological curves, two transition temperatures, Ta and Tgel, were determined as a consequence of the thermo-responsiveness of PNIPAAm side chain. Storage (G′) and loss (G″) modulus curves undergo a slope inversion at Ta temperature, where both moduli begin to increase caused by an associative behavior of PNIPAAm domains. While, Tgel temperature is related to the onset of the gelation process at the G′/G″ crossover. In order to design samples with liquid-gel transitions close to the human body, able to form gels in situ once inoculated, it was possible to tailor both transition temperatures selecting copolymers with an appropriate PNIPAAm content and optimizing the copolymer concentration in the aqueous solution. A good agreement between transition temperatures and viscoelastic properties was achieved for 5 wt% aqueous solutions of copolymers with low NIPAAm content synthesized at the lowest absorbed dose (0.5 kGy). Highlights • Low doses of γ radiation allow to synthesize alginate-g-PNIPAAm copolymers. • Structure-properties relationship was well defined by rheology in aqueous solution. • Copolymers sol–gel transitions could be tailored close to body temperature. • We obtained injectable solutions to form gels in situ once inoculated. [ABSTRACT FROM AUTHOR]

The advancement achieved in Tissue Engineering is based on a careful and in-depth study of cell–tissue interactions. The choice of a specific biomaterial in Tissue Engineering is fundamental, as it represents an interface for adherent cells in the creation of a microenvironment suitable for cell growth and differentiation. The knowledge of the biochemical and biophysical properties of the extracellular matrix is a useful tool for the optimization of polymeric scaffolds. This review aims to analyse the chemical, physical, and biological parameters on which are possible to act in Tissue Engineering for the optimization of polymeric scaffolds and the most recent progress presented in this field, including the novelty in the modification of the scaffolds' bulk and surface from a chemical and physical point of view to improve cell–biomaterial interaction. Moreover, we underline how understanding the impact of scaffolds on cell fate is of paramount importance for the successful advancement of Tissue Engineering. Finally, we conclude by reporting the future perspectives in this field in continuous development. [ABSTRACT FROM AUTHOR]

Biopolymer-based formulations show great promise in enhancing the effectiveness of entomopathogenic fungi as bioinsecticides. Chitosan and starch, among other biopolymers, have been utilized to improve spore delivery, persistence, and adherence to target insects. These formulations offer advantages such as target specificity, eco-friendliness, and sustainability. However, challenges related to production costs, stability, and shelf life need to be addressed. Recently, biomimetic lure and kill approaches based on biopolymers offer cost-effective solutions by leveraging natural attractants. Further research is needed to optimize these formulations and overcome challenges. Biopolymer-based formulations have the potential to revolutionize pest control practices, providing environmentally friendly and sustainable solutions for agriculture. [ABSTRACT FROM AUTHOR]

The goal of regenerative medicine is to achieve tissue regeneration. In the past, commonly used techniques included autologous or allogeneic transplantation and stem cell therapy, which have limitations, such as a lack of donor sites in the case of autologous transplantation and the invasiveness of stem cell harvesting. In recent years, research has, therefore, focused on new and less invasive strategies to achieve tissue regeneration. A step forward in this direction has been made with the development of autologous platelet concentrates (APCs), which are derived from the patient's own blood. They can be classified into three generations: platelet-rich plasma (PRP), platelet-rich fibrin (PRF), and concentrated growth factors (CGFs). These APCs have different structural characteristics, depending on the distinctive preparation method, and contain platelets, leukocytes, and multiple growth factors, including those most involved in regenerative processes. The purpose of this review is to clarify the most used techniques in the field of regenerative medicine in recent years, comparing the different types of APCs and analyzing the preparation protocols, the composition of the growth factors, the level of characterization achieved, and their clinical applications to date. [ABSTRACT FROM AUTHOR]

Poly(ethylene glycol) diacrylate (PEGDA) cryogels, particularly useful for biotechnological applications, are currently fabricated exploiting crosslinking systems that require long freezing/crosslinking times (20 h or longer). The aim of this work was to assess whether fast UV irradiation (up to 60 s) of frozen PEGDA solutions could be an advantageous alternative for cryogel production. By using different polymer concentrations and UV times, cryogels with highly interconnected macropores (about 50–90 μm) were produced. A gelation yield in the range 60–80% was recorded, with higher values obtained for low PEGDA concentrations (5 and 10% w/v). Interestingly, while decreasing the swelling and increasing the stiffness of the cryogels, a higher polymer concentration was also found to reduce the pore size. Furthermore, increasing the UV time resulted in significantly higher swelling and larger pores for 10% PEGDA samples, while having negligible effect on other cryogel types and/or features. Although deserving further exploration, fast UV irradiation is an effective method to produce PEGDA cryogels with tunable properties. [ABSTRACT FROM AUTHOR]

Simple Summary: The aim of this study was to identify new and innovative strategies to improve the tissue-regeneration process. Concentrated growth factor (CGF) is an autologous biomaterial rich in growth factors and multipotent stem cells. The purpose of our study was to evaluate the osteogenic differentiation of CGF primary cells in the presence of a hydroxyapatite–silicon scaffold, which represents a very interesting material in the field of bone reconstructive surgery. Our findings showed that the hydroxyapatite–silicon scaffold provided support to primary CGF cells by enhancing osteogenic differentiation. These data suggest interesting perspectives in the use of CGF together with scaffolds in the field of regenerative medicine. The application of scaffolding materials together with stem cell technologies plays a key role in tissue regeneration. Therefore, in this study, CGF (concentrated growth factor), which represents an autologous and biocompatible blood-derived product rich in growth factors and multipotent stem cells, was used together with a hydroxyapatite and silicon (HA-Si) scaffold, which represents a very interesting material in the field of bone reconstructive surgery. The aim of this work was to evaluate the potential osteogenic differentiation of CGF primary cells induced by HA-Si scaffolds. The cellular viability of CGF primary cells cultured on HA-Si scaffolds and their structural characterization were performed by MTT assay and SEM analysis, respectively. Moreover, the matrix mineralization of CGF primary cells on the HA-Si scaffold was evaluated through Alizarin red staining. The expression of osteogenic differentiation markers was investigated through mRNA quantification by real-time PCR. We found that the HA-Si scaffold was not cytotoxic for CGF primary cells, allowing their growth and proliferation. Furthermore, the HA-Si scaffold was able to induce increased levels of osteogenic markers, decreased levels of stemness markers in these cells, and the formation of a mineralized matrix. In conclusion, our results suggest that HA-Si scaffolds can be used as a biomaterial support for CGF application in the field of tissue regeneration. [ABSTRACT FROM AUTHOR]

In the present study, we have produced a sodium carboxymethylcellulose (CMC) hydrogel from a bacterial cellulose etherification reaction with chloroacetic acid in an alkaline medium. Bacterial cellulose (BC) was synthesized via economical and environmentally friendly methods using the Gluconacetobacter xylinus bacterium. After purification, freeze-drying, and milling, BC microparticles were dispersed in NaOH solution for different time periods before the etherification reaction. This has allowed the understanding of the alkalinization effect on BC modification. All synthesized CMC were soluble in water, and FTIR and XRD analyses confirmed the etherification reaction. The bath of BC in NaOH solution affects both molecular weight and degree of substitution. SEM analysis revealed the change of BC microstructure from fibrous-like to a smooth, uniform structure. The CMC-0 h allowed the production of crosslinked hydrogel after dehydrothermal treatment. Such hydrogel has been characterized rheologically and has shown a water absorption of 35 times its original weight. The optimization of the CMC produced from BC could pave the way for the production of ultrapure hydrogel to be applied in the healthcare and pharmaceutical industry. [ABSTRACT FROM AUTHOR]

Oral drug administration provides a convenient and patient‐compliant way for drug delivery, especially for chronic diseases and prolonged pharmacological treatments. However, due to the repetitiveness of such therapeutic approach, the patients are led to neglect/forget the therapy affecting the healthcare delivery. Indeed, the non‐adherence to pharmacological prescriptions and the unknown amount of real‐time drug release result in a non‐compliant therapeutic drug level over the protracted therapies. The proposed technology will enable the monitoring of both pharmacological adherence and real‐time drug release. The approach exploits a passive intrabody communication (IBC) activation in order to enable an edible pill, realized starting from food additives and food‐grade materials, to monitor pharmacological adherence. Following activation, the signal is modulated by IBC coupling switching triggered by pill degradation in a gastrointestinal tract, resulting in a monitored drug release. The proof‐of‐concept is designed for a targeted release and monitoring of Metformin in the intestine. The system shows an in vitro limit of cumulative drug release detection of 18 µg mL−1 and a limit of real‐time drug release detection of 2 µg mL−1 min−1. This platform represents the first solution to monitor passive drug release in real‐time, from intake to complete absorption, enabling unique and long‐sought healthcare therapy and treatment opportunity. [ABSTRACT FROM AUTHOR]

Edentulism is the condition of having lost natural teeth, and has serious social, psychological, and emotional consequences. The need for implant services in edentulous patients has dramatically increased during the last decades. In this study, the effects of concentrated growth factor (CGF), an autologous blood-derived biomaterial, in improving the process of osseointegration of dental implants have been evaluated. Here, permeation of dental implants with CGF has been obtained by using a Round up device. These CGF-coated dental implants retained a complex internal structure capable of releasing growth factors (VEGF, TGF-β1, and BMP-2) and matrix metalloproteinases (MMP-2 and MMP-9) over time. The CGF-permeated implants induced the osteogenic differentiation of human bone marrow stem cells (hBMSC) as confirmed by matrix mineralization and the expression of osteogenic differentiation markers. Moreover, CGF provided dental implants with a biocompatible and biologically active surface that significantly improved adhesion of endothelial cells on CGF-coated implants compared to control implants (without CGF). Finally, data obtained from surgical interventions with CGF-permeated dental implants presented better results in terms of optimal osseointegration and reduced post-surgical complications. These data, taken together, highlight new and interesting perspectives in the use of CGF in the dental implantology field to improve osseointegration and promote the healing process. [ABSTRACT FROM AUTHOR]

The Mark-Houwink-Sakurada (MHS) equation allows for estimation of rheological properties, if the molecular weight is known along with good understanding of the polymer conformation. The intrinsic viscosity of a polymer solution is related to the polymer molecular weight according to the MHS equation, where the value of the constants is related to the specific solvent and its concentration. However, MHS constants do not account for other characteristics of the polymeric solutions, i.e., Deacetilation Degree (DD) when the solute is chitosan. In this paper, the degradation of chitosan in different acidic environments by thermal treatment is addressed. In particular, two different solutions are investigated (used as solvent acetic or hydrochloric acid) with different concentrations used for the preparation of chitosan solutions. The samples were treated at different temperatures (4, 30, and 80 °C) and time points (3, 6 and 24 h). Rheological, Gel Permeation Chromatography (GPC), Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analyses (TGA) were performed in order to assess the degradation rate of the polymer backbones. Measured values of molecular weight have been integrated in the simulation of the batch degradation of chitosan solutions for evaluating MHS coefficients to be compared with their corresponding experimental values. Evaluating the relationship between the different parameters used in the preparation of chitosan solutions (e.g., temperature, time, acid type and concentration), and their contribution to the degradation of chitosan backbone, it is important to have a mathematical frame that could account for phenomena involved in polymer degradation that go beyond the solvent-solute combination. Therefore, the goal of the present work is to propose an integration of MHS coefficients for chitosan solutions that contemplate a deacetylation degree for chitosan systems or a more general substitution degree for polymers in which viscosity depends not only on molecular weight and solvent combinations. [ABSTRACT FROM AUTHOR]

[Display omitted] • Conceptualization and development of OleoPlast, the first oleogel-based bioplastic. • OleoPlast demonstrates versatile chemical, physical and mechanical properties. • OleoPlast is a biodegradable and recyclable thermoplastic. • OleoPlast is processable with injection/compression molding, CNC and FDM. • Applications include food packaging, electronics, composites and tissue engineering. The crisis of plastic waste highlights the urgent need for sustainable alternatives. Bioplastics are seen as a potential solution; however, challenges persist as many are still derived from petroleum, lack biodegradability, or fall short in essential properties such as mechanical strength, chemical stability, and ease of processing. This study pioneers the use of ethyl cellulose-based oleogels as bioderived and biodegradable thermoplastics. These groundbreaking bioplastics, obtained from renewable sources and waste oils, represent an environmentally friendly and high-performance alternative to traditional plastics. The bioplastic named OleoPlast is processed at temperatures ranging from 130 to 165 °C, utilizing different biobased oils and adjusting the oil-to-polymer ratio from 10:3.5 to 1:2. This process yields a high level of versatility, offering broad opportunities for customized applications in both research and industry. Remarkable stability under harsh environmental conditions and biocompatibility pave the way for the adoption of such bioplastics in biocomposite structures, food packaging, green electronics, and tissue engineering. Scalability is ensured by compatibility with both large-scale and high-resolution manufacturing processes, including injection and compression molding, computer numeric control (CNC) milling, and 3D fusion deposition modeling. Overall, this work lays the foundation for a new class of gel-state bioplastics, favoring the transition from traditional thermoplastics to sustainable options with vast perspectives of further exploration and customization in both laboratory and industrial environments. [ABSTRACT FROM AUTHOR]

Pest management is looking for green and cost-effective innovative solutions to control tiger mosquitoes and other pests. By using biomimetic principles and biocompatible/biodegradable biopolymers, it could be possible to develop a new approach based on substrates that selectively attract insects by reproducing specific natural environmental conditions and then kill them by hosting and delivering a natural biopesticide or through mechanical action (biomimetic lure and kill approach, BL&K). Such an approach can be theoretically specialized against tiger mosquitoes (BL&K-TM) by designing hydrogels to imitate the natural oviposition site's conditions to employ them inside a lure and kill ovitraps as a biomimetic oviposition substrate. In this work, the hydrogels have been prepared to prove the concept. The study compares lab/on-field oviposition between standard substrates (absorbing paper/masonite) and a physical and chemically crosslinked hydrogel composition panel. Then the best performing is characterized to evaluate a correlation between the hydrogel's properties and oviposition. Tests identify a 2-Hydroxyethylcellulose (HEC)-based physical hydrogel preparation as five times more attractive than the control in a lab oviposition assay. When employed on the field in a low-cost cardboard trap, the same substrate is seven times more capturing than a standard masonite ovitrap, with a duration four times longer. [ABSTRACT FROM AUTHOR]

Purpose: The objective of this work was to develop composite hydrogels based on poly(ethylene glycol) diacrylate (PEGDA) and collagen (Coll), potentially useful for biomedical applications. Methods: Semi-interpenetrating polymer networks (semi-IPNs) were obtained by photo-stabilizing aqueous solutions of PEGDA and acrylic acid (AA), in the presence of collagen. Further grafting of the collagen macromolecules to the PEGDA/ poly(AA) network was achieved by means of a carbodiimide-mediated crosslinking reaction. The resulting hydrogels were characterized in terms of swelling capability, collagen content and mechanical properties. Results and conclusions: The grafting procedure was found to significantly improve the mechanical stability of the IPN hydrogels, due to the establishment of covalent bonding between the PEGDA/poly(AA) and the collagen networks. The suitability of the composite hydrogels to be processed by means of stereolithography (SLA) was also investigated, toward creating biomimetic constructs with complex shapes, which might be useful either as platforms for tissue engineering applications or as tissue mimicking phantoms. [ABSTRACT FROM AUTHOR]

Background: Pest management has been facing the spread of invasive species, insecticide resistance phenomena, and concern for the impact of chemical pesticides on human health and the environment. It has tried to deal with them by developing technically efficient and economically sustainable solutions to complement/replace/improve traditional control methods. The renewal has been mainly directed towards less toxic pesticides or enhancing the precision of their delivery to reduce the volume employed and side effects through lure-and-kill approaches based on semiochemicals attractants. However, one of the main pest management problems is that efficacy depends on the effectiveness of the attractant system, limiting its successful employment to semiochemical stimuli-responsive insects. Biomaterial-based and bioinspired/biomimetic solutions that already guide other disciplines (e.g., medical sciences) in developing precision approaches could be a helpful tool to create attractive new strategies to liberate precision pest management from the need for semiochemical stimuli, simplify their integration with bioinsecticides, and foster the use of still underemployed solutions. Approach proposed: We propose an innovative approach, called "biomimetic lure-and-kill". It exploits biomimetic principles and biocompatible/biodegradable biopolymers (e.g., natural hydrogels) to develop new substrates that selectively attract insects by reproducing specific natural environmental conditions (biomimetic lure) and kill them by hosting and delivering a natural biopesticide or through mechanical action. Biomimetic lure-and-kill-designed substrates point to provide a new attractive system to develop/improve and make more cost-competitive new and conventional devices (e.g. traps). A first example application is proposed using the tiger mosquito Aedes albopictus as a model. Conclusions: Biomaterials, particularly in the hydrogel form, can be a useful tool for developing the biomimetic lure-and-kill approach because they can satisfy multiple needs simultaneously (e.g., biomimetic lure, mechanical lethality, biocompatibility, and bioinsecticide growth). Such an approach might be cost-competitive, and with the potential for applicability to several pest species. Moreover, it is already technically feasible, since all the technologies necessary to design and configure materials with specific characteristics are already available on the market. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this project was to study the proliferation and differentiation of human Mesenchymal Stem Cells (hMSCs) onto a cellulose-based hydrogel for bone tissue engineering. Methods: Modified-cellulose hydrogel was prepared via double esterification crosslinking using citric acid. The response of hMSCs in terms of cell proliferation and differentiation into osteoblastic phenotype was evaluated by using Alamar blue™ assay and alkaline phosphatase (ALP) activity. Results: The results showed that CMCNa and CMCNa_CA have no negative effect on hMSC, adhesion and proliferation. Moreover, the increase of the ALP expression for CMCNa_CA confirms the ability of the hydrogels to support the osteoblastic differentiation. Conclusions: The cellulose-based hydrogels have a potential application as filler in bone tissue regeneration. [ABSTRACT FROM AUTHOR]

Overweight and obesity are major health concerns worldwide, and are major predisposing factors for type 2 diabetes. This single-centre, Phase I, randomised, open-label, single-dose, 4-arm crossover, device–drug interaction study on 24 healthy volunteers with a body mass index of 25–40 kg/m2 tested the effect of a novel, nonsystemic, orally administered hydrogel (GS100) on the pharmacokinetics of an oral antidiabetic drug, metformin. When administered in both the fed and fasted states, the effect of GS100 on metformin pharmacokinetic characteristics was found to be similar to that of food. The type, frequency, and intensity of adverse events observed when GS100 was co-administered with metformin were similar to those observed with metformin alone. This study demonstrates that GS100 can be taken by patients receiving metformin, without altering the administration of metformin. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) techniques allow the construction of complex physical models reproducing the content of a specific CAD file, and, among them, Fused Deposition Molding (FDM) stands out for its many advantages. The aim of the present work is to perform a feasibility study of 3D printing of a model of human heart to be used to simulate surgical operations or for training through a two-step method based on extrusion and FDM processes. To this purpose, typical extrusion instrumentation and a simple and low-cost FDM printer are employed, in combination with a thermoplastic polydimethylsiloxane (PDMS), chosen for its transparency, flexibility, and high resistance to multiple agents and aging. To improve its tactile properties and mimic the slimy effect of living organs, sodium carboxymethylcellulose (Na–CMC) fibrils are added to it. The starting materials, the neat PDMS filament and the composite one, are deeply characterized in terms of structural, thermal, and rheological properties in order to fix the most suitable extrusion and FDM parameters. The composite filaments show larger diameter and roughness, which cause undesirable effects during 3D printing, such as episodic nozzle obstruction, and exhibit a faster degradation, making the FDM step difficult. Nevertheless, the major issues are related to the low crystallinity degree of the employed polymer. The feasibility study carried out leads to the printing of composite layers, even though far from the desired final target. Possible solutions to print the fully characterized Na–CMC/PDMS composite are addressed in the conclusion of this work. [ABSTRACT FROM AUTHOR]

In this work, a novel composite sorbent material for water remediation from oily contaminants, based on a cellulose three-dimensional fibrous scaffold treated with stearic acid and expanded graphite flakes, is presented. The pristine cellulose foams are inherently omniphilic, absorbing indiscriminately both water and oils. However, after being modified with stearic acid and graphite via drop casting, they become superhydrophobic (still preserving their superoleophilic characteristics). As a result, the foams start exhibiting a highly selective behaviour which permits to absorb different kinds of oils and organic solvents, while repelling water completely. Thermal and chemical characterizations reveal that the modification treatment is successfully performed, while the performed mechanical tests demonstrate a good recovery of elasticity after repeated deformations and confirm that the elasticity of the foam is preserved after the treatment. Although based on natural materials, the fabricated foams exhibit oil absorption rate, saturation time and capacity values comparable to those of some synthetic materials with the same aim, exhibiting a very important added value, as it is based on low cost, green and biodegradable materials, requiring, at the same time, low processing costs and providing excellent reusability properties. [ABSTRACT FROM AUTHOR]

The authors have recently developed a time‐domain reflectometry (TDR)‐based leak‐localisation system which, being based on an electromagnetic technique, overcomes the well‐known downsides (sensitivity to environmental noise, to pipe material and geometry etc.) of traditional, electro‐acoustic leak‐localisation techniques. Starting from the positive results obtained so far, in this work, the authors investigate the possibility of implementing an integrated TDR/ground penetrating radar (TDR/GPR) approach. The TDR would allow the preliminary leak localisation, while the GPR technique would be used to have a countercheck for possible false positives. Also, GPR would allow to assess the quantity of the leaked water (thus scheduling a priority order for repair) and to obtain a three‐dimensional view of the subsurface soil around the pipes, so as to assess their health status. In this work, the combined TDR/GPR approach is tested on a pipe section in the presence of two leaks. In addition to this, in this study, also a different configuration of the TDR sensing element (SE) is experimented. As described in what follows, this new SE configuration is expected to expedite considerably the implementation and the use of the TDR‐based leak detection system. [ABSTRACT FROM AUTHOR]

• Mosquitoes and ticks are a threat for animal health, acting as vectors of pathogens. • Their management mainly rely to the employ of synthetic insecticides and acaricides. • We reviewed the use of entomopathogenic fungi (EPF) for mosquito and tick control. • Strengths and weaknesses of EPF formulations and delivery methods are discussed. • Solutions to improve the EPF delivery and effectiveness in the field are proposed. Insects, ticks, and mites represent a threat to animal health globally, mainly due to their role as vectors of pathogens. Among the most important diseases, those transmitted by mosquitoes (e.g., malaria and arboviral infections) and ticks (e.g., Lyme borreliosis, babesiosis, and viral haemorrhagic fever) have a huge impact on human health. The principal methods available for reducing the public health burden of most vector-borne diseases are vector-based intervention relying to insecticides and acaricides. However, the use of these products is challenged by the introduction of invasive species, the quick development of physiological insecticide and acaricide resistance, and their non-target effects on human health and environment. In this scenario, insecticide/acaricide-free control approaches based on the employment of entomopathogenic fungi (EPFs) are currently considered a promising tool in Integrated Pest/Vector Management, even if their large-scale use is still limited. In this article, we provide an overview on current knowledge about the role of EPFs for mosquito and tick management to assess solutions improving the delivery and efficacy of EPFs in the field. Laboratory research provided solid evidence that EPFs represent a next-generation control tool to manage mosquito and tick populations. However, the viability, infectivity, and persistence of fungal spores under field conditions are still inadequate. Herein we also discuss the development and optimization of EPF-based lure and kill approaches through biopolymers to improve cost-competitive, safety and eco-friendly pest and vector control tools. [Display omitted] [ABSTRACT FROM AUTHOR]

Concentrated Growth Factors (CGF) represent new autologous (blood-derived biomaterial), attracting growing interest in the field of regenerative medicine. In this study, the chemical, structural, and biological characterization of CGF was carried out. CGF molecular characterization was performed by GC/MS to quantify small metabolites and by ELISA to measure growth factors and matrix metalloproteinases (MMPs) release; structural CGF characterization was carried out by SEM analysis and immunohistochemistry; CGF has been cultured, and its primary cells were isolated for the identification of their surface markers by flow cytometry, Western blot, and real-time PCR; finally, the osteogenic differentiation of CGF primary cells was evaluated through matrix mineralization by alizarin red staining and through mRNA quantification of osteogenic differentiation markers by real-time PCR. We found that CGF has a complex inner structure capable of influencing the release of growth factors, metabolites, and cells. These cells, which could regulate the production and release of the CGF growth factors, show stem features and are able to differentiate into osteoblasts producing a mineralized matrix. These data, taken together, highlight interesting new perspectives for the use of CGF in regenerative medicine. [ABSTRACT FROM AUTHOR]

Blood-derived concentrated growth factors (CGFs) represent a novel autologous biomaterial with promising applications in regenerative medicine. Angiogenesis is a key factor in tissue regeneration, but the role played by CGFs in vessel formation is not clear. The purpose of this study was to characterize the angiogenic properties of CGFs by evaluating the effects of its soluble factors and cellular components on the neovascularization in an in vitro model of angiogenesis. CGF clots were cultured for 14 days in cell culture medium; after that, CGF-conditioned medium (CGF-CM) was collected, and soluble factors and cellular components were separated and characterized. CGF-soluble factors, such as growth factors (VEGF and TGF-β1) and matrix metalloproteinases (MMP-2 and -9), were assessed by ELISA. Angiogenic properties of CGF-soluble factors were analyzed by stimulating human cultured endothelial cells with increasing concentrations (1%, 5%, 10%, or 20%) of CGF-CM, and their effect on cell migration and tubule-like formation was assessed by wound healing and Matrigel assay, respectively. The expression of endothelial angiogenic mediators was determined using qRT-PCR and ELISA assays. CGF-derived cells were characterized by immunostaining, qRT-PCR and Matrigel assay. We found that CGF-CM, consisting of essential pro-angiogenic factors, such as VEGF, TGF-β1, MMP-9, and MMP-2, promoted endothelial cell migration; tubule structure formation; and endothelial expression of multiple angiogenic mediators, including growth factors, chemokines, and metalloproteinases. Moreover, we discovered that CGF-derived cells exhibited features such as endothelial progenitor cells, since they expressed the CD34 stem cell marker and endothelial markers and participated in the neo-angiogenic process. In conclusion, our results suggest that CGFs are able to promote endothelial angiogenesis through their soluble and cellular components and that CGFs can be used as a biomaterial for therapeutic vasculogenesis in the field of tissue regeneration. [ABSTRACT FROM AUTHOR]

In the current work, our purpose was based on the assessment of bioactive chitosan (CS)/Poly(ethylene glycol) diacrylate (PEGDA) based scaffolds ability to stimulate in vitro angiogenesis process. The bioactivation of the scaffolds was accomplished by using organic (BMP-2 peptide) and inorganic (hydroxyapatite nanoparticles) cues. In particular, the properties of the materials in terms of biological response promotion on human umbilical vein endothelial cells (HUVECs) were studied by using in vitro angiogenesis tests based on cell growth and proliferation. Furthermore, our interest was to examine the scaffolds capability to modulate two important steps involved in angiogenesis process: migration and tube formation of cells. Our data underlined that bioactive signals on CS/PEGDA scaffolds surface induce a desirable effect on angiogenic response concerning angiogenic marker expression (CD-31) and endothelial tissue formation (tube formation). Taken together, the results emphasized the concept that bioactive CS/PEGDA scaffolds may be novel implants for stimulating neovascularization of tissue-engineered constructs in regenerative medicine field. Scheme about the biological effects of bioactive Chitosan-scaffolds. Unlabelled Image • Bioactive CS-scaffolds with inorganic and organic bioactive signals. • CS-scaffolds provide a positive response to HUVECs. • Organic bioactive signal (BMP-2 peptide) on CS-scaffolds surface promotes better angiogenesis compared to biomineralized (BIOM) and neat CS-scaffolds. [ABSTRACT FROM AUTHOR]

Chitosan is a polysaccharide commonly used, together with its derivatives, in the preparation of hydrogel formulations, scaffolds and films for tissue engineering applications. Chitosan can be used as such, but it is commonly stabilized by means of chemical crosslinkers. Genipin is one of the crosslinkers that has been considered that is a crystalline powder extracted from the fruit of Gardenia jasminoides and processed to obtain an aglycon compound. Genipin is gaining interest in biological applications because of its natural origin and anti-inflammatory actions. In this paper, the ability of chitosan-based materials crosslinked with genipin to exert anti-inflammation properties in applications such as bone regeneration was studied. Powders obtained from chitosan–genipin scaffolds have been tested in order to mimic the natural degradation processes occurring during biomaterials implantation in vivo. The results from osteoblast-like cells showed that specific combinations of chitosan and genipin stimulate high permissiveness towards cells, with higher performance than the pure chitosan. In parallel, evidences from monocyte-like cells showed that the crosslinker, genipin, seems to promote slowing of the monocyte-macrophage transition at morphological level. This suggests a sort of modularity of pro-inflammatory versus anti-inflammatory behavior of our chitosan-based biomaterials. Being both the cell types exposed to microscale powders, as an added value our results bring information on the cell–material interactions in the degradative dynamics of chitosan scaffold structures during the physiological resorption processes. [ABSTRACT FROM AUTHOR]

Current bone implants based on new biomaterials may cause a foreign body reaction (FBR) around the implant itself thus prolonging the healing time following bone fractures. In this paper, biomimetic chitosan-based scaffolds promoting bone tissue regeneration and controlling inflammatory response are proposed. First, the anti-inflammatory potential of scaffolds on hMSCs stimulated by lipopolysaccharide (LPS) was investigated by dosing the levels of some interleukins and oxidative stress metabolites (IL-1β, IL-10 and nitrites) involved in immune response. Then, to mimic the inflammation process at osteoporotic site, the effect of scaffolds was evaluated on in vitro co-culture model based on osteoblasts and macrophages stimulated by LPS. Results demonstrated that bioactivated scaffolds are able to i) inhibit synthesis of inflammatory mediators such as IL-1β; ii) reduce oxidative stress metabolites; and iii) promote anti-inflammatory markers generation (IL-10) in hMSCs. Finally, bioactivated scaffolds show an anti-inflammatory activity also on in vitro co-cultures, which better mimic in vivo damaged bone microenvironment. Unlabelled Image • Functionalization of chitosan-based scaffolds was obtained through organic and inorganic cues. • The effect of scaffolds to modulate inflammatory response was evaluated on in vitro model mimicking inflamed microenvironment. • Bioactivated scaffolds are able to prevent inflammation reaction and reduce oxidative stress on in vitro model of osteoporosis. [ABSTRACT FROM AUTHOR]

In recent years, different processing technologies have been engineered to fabricate capsules or particles with peculiar properties (e.g., swelling, pH-sensitive response) at the micro and sub-micrometric size scale, to be used as carriers for controlled drug and molecular release. Herein, the development of cellulose acetate (CA) micro-carriers with mono- (MC) or bi-phasic (BC) composition is proposed, fabricated via electrohydrodynamic atomization (EHDA)—an electro-dropping technology able to micro-size polymer solution by the application of high voltage electrostatic forces. Image analysis allows identification of the process parameters to optimize morphology, in terms of size distribution and shape. Meanwhile, an accurate rheological study has enabled investigating the interface between CA solutions with different viscosities to optimize BC systems. Release tests have confirmed that BC carriers can retain the drug more efficiently in acidic conditions, also providing a more gradual and sustained release until six days, with respect to MC carriers. Hence, all these results have proven that biphasic architecture significantly improves the capability of CA microcarriers to release ketoprofen lysinate, thus suggesting a new route to design core/shell systems for the retarded oral administration of anti-inflammatory drugs. [ABSTRACT FROM AUTHOR]