Search

Actual acquired air quality time series data are highly volatile and nonstationary, and accurately predicting nonlinear time series data containing complex noise is an ongoing challenge. This paper proposes an air quality prediction method based on empirical mode decomposition (EMD), a transformer and a bidirectional long short-term memory neural network (BiLSTM), which is good at addressing the ultrashort-term prediction of nonlinear time-series data and shows good performance for application to the air quality dataset of Patna, India (6:00 am on October 3, 2015–0:00 pm on July 1, 2020). The AQI sequence is first decomposed into intrinsic mode functions (IMFs) via EMD and subsequently predicted separately via the improved transformer algorithm based on BiLSTM, where linear prediction is performed for IMFs with simple trends. Finally, the predicted values of each IMF are integrated using BiLSTM to obtain the predicted AQI values. This paper predicts the AQI in Patna with a time window of 5 h, and the RMSE, MAE and MAPE are as low as 5.6853, 2.8230 and 2.23%, respectively. Moreover, the scalability of the proposed model is validated on air quality datasets from several other cities, and the results prove that the proposed hybrid model has high performance and broad application prospects in real-time air quality prediction. [ABSTRACT FROM AUTHOR]

Accurate prediction of air quality is crucial for assessing the state of the atmospheric environment, especially considering the nonlinearity, volatility, and abrupt changes in air quality data. This paper introduces an air quality index (AQI) prediction model based on the Dung Beetle Algorithm (DBO) aimed at overcoming limitations in traditional prediction models, such as inadequate access to data features, challenges in parameter setting, and accuracy constraints. The proposed model optimizes the parameters of Variational Mode Decomposition (VMD) and integrates the Informer adaptive sequential prediction model with the Convolutional Neural Network-Long Short Term Memory (CNN-LSTM). Initially, the correlation coefficient method is utilized to identify key impact features from multivariate weather and meteorological data. Subsequently, penalty factors and the number of variational modes in the VMD are optimized using DBO. The optimized parameters are utilized to develop a variationally constrained model to decompose the air quality sequence. The data are categorized based on approximate entropy, and high-frequency data are fed into the Informer model, while low-frequency data are fed into the CNN-LSTM model. The predicted values of the subsystems are then combined and reconstructed to obtain the AQI prediction results. Evaluation using actual monitoring data from Beijing demonstrates that the proposed coupling prediction model of the air quality index in this paper is superior to other parameter optimization models. The Mean Absolute Error (MAE) decreases by 13.59%, the Root-Mean-Square Error (RMSE) decreases by 7.04%, and the R-square (R2) increases by 1.39%. This model surpasses 11 other models in terms of lower error rates and enhances prediction accuracy. Compared with the mainstream swarm intelligence optimization algorithm, DBO, as an optimization algorithm, demonstrates higher computational efficiency and is closer to the actual value. The proposed coupling model provides a new method for air quality index prediction. [ABSTRACT FROM AUTHOR]

Worldwide, the need for thermal insulation materials used to increase the energy performance of buildings and ensure indoor thermal comfort is constantly growing. There are several traditional, well-known and frequently used thermal insulation materials on the building materials market, but there is a growing trend towards innovative materials based on agro-industrial waste. This paper analyses the performance of 10 such innovative thermal insulation materials obtained by recycling cellulosic and/or animal waste, using standardised testing methods. More precisely, thermal insulation materials based on the following raw materials were analysed: cellulose acetate, cigarette filter manufacturing waste; cellulose acetate, cigarette filter manufacturing waste and cigarette paper waste; cellulose acetate, waste from cigarette filter manufacturing, waste cigarette paper and waste aluminised paper; cellulose from waste paper (two types made by two independent manufacturers); wood fibres; cellulose from cardboard waste; cellulose from waste cardboard, poor processing, inhomogeneous product; rice husk waste and composite based on sheep wool, recycled PET fibres and cellulosic fibres for the textile industry. The analysis followed the performance in terms of thermal insulating quality, evidenced by the thermal conductivity coefficient (used as a measurable indicator) determined for both dry and conditioned material at 50% RH, in several density variants, simulating the subsidence under its own weight or under various possible stresses arising in use. The results showed in most cases that an increase in material density has beneficial effects by reducing the coefficient of thermal conductivity, but exceptions were also reported. In conjunction with this parameter, the analysis of the 10 types of materials also looked at their moisture sorption/desorption capacity (using as a measurable indicator the amount of water stored by the material), concluding that, although they have a capacity to regulate the humidity of the indoor air, under low RH conditions the water loss is not complete, leaving a residual quantity of material that could favour the development of mould. Therefore, the impact on indoor air quality was also analysed by assessing the risk of mould growth (using as a measurable indicator the class and performance category of the material in terms of nutrient content conducive to the growth of microorganisms) under high humidity conditions but also the resistance to the action of two commonly encountered moulds, Aspergillus niger and Penicillium notatum. The results showed a relative resistance to the action of microbiological factors, indicating however the need for intensified biocidal treatment. [ABSTRACT FROM AUTHOR]

The Upper Hunter Valley is a major coal mining area in New South Wales (NSW), Australia. Due to the ongoing increase in mining activities, PM10 (air-borne particles with an aerodynamic diameter less than 10 micrometres) pollution has become a major air quality concern in local communities. The present study was initiated to quantitatively examine the spatial and temporal variability of PM10 pollution in the region. An earlier paper of this study identified two air quality subregions in the valley. This paper aims to provide a holistic summarisation of the relationships between elevated PM10 pollution in two subregions and the local- and synoptic-scale meteorological conditions for spring and summer, when PM10 pollution is relatively high. A catalogue of twelve synoptic types and a set of six local meteorological patterns were quantitatively derived and linked to each other using the self-organising map (SOM) technique. The complex meteorology–air pollution relationships were visualised and interpreted on the SOM planes for two representative locations. It was found that the influence of local meteorological patterns differed significantly for mean PM10 levels vs. the occurrence of elevated pollution events and between air quality subregions. In contrast, synoptic types showed generally similar relationships with mean vs. elevated PM10 pollution in the valley. Two local meteorological patterns, the hot–dry–northwesterly wind conditions and the hot–dry–calm conditions, were found to be the most PM10 pollution conducive in the valley when combined with a set of synoptic counterparts. These synoptic types are featured with the influence of an eastward migrating continental high-pressure system and westerly troughs, or a ridge extending northwest towards coastal northern NSW or southern Queensland from the Tasman Sea. The method and results can be used in air quality research for other locations of NSW, or similar regions elsewhere. [ABSTRACT FROM AUTHOR]

This paper introduces a machine-learning-driven approach for automated Nocturnal Low-Level Jet (NLLJ) identification using observations of wind profiles from a Radar Wind Profiler (RWP). The work discussed here is an effort to lay the groundwork for a systematic study of the Mid-Atlantic NLLJ's formation mechanisms and their influence on nocturnal and diurnal air quality in major urban regions by establishing a general framework of NLLJ features and characteristics with an identification algorithm. Leveraging a comprehensive wind profile dataset maintained by the Maryland Department of Environment's RWP network, our methodology employs supervised machine learning techniques to isolate the features of the south-westerly NLLJ. This methodology was developed to illuminate spatiotemporal patterns and nuanced characteristics of NLLJ events, unveiling their significant role in shaping the planetary boundary layer. This paper discusses the construction of this methodology, its performance against known NLLJs in the current literature, intended usage, and a preliminary statistical analysis. First light results from this analysis have identified a total of 90 south-westerly NLLJs from May–September of 2017–2021 as captured by the RWP stationed in Beltsville, MD (39.05°, -76.87°, 135 m ASL). A composite of these 90 jets is presented to better illustrate many of the bulk parameters, such as core height, duration, and maximum wind speed, associated with the onset and decay of the Mid-Atlantic NLLJ. We hope our study equips researchers and policymakers with further means to monitor, predict, and address these nocturnal dynamics phenomena that frequently influence boundary layer composition and air quality in the U.S. Mid-Atlantic and Northeastern regions. [ABSTRACT FROM AUTHOR]

This paper presents an indoor air quality (IAQ) monitoring system designed for a better end-user experience. The monitoring system consists of elements, from the monitoring sensor to the monitoring interface, designed and implemented by the research team, especially for the proposed monitoring system. The monitoring solution is intended for users who live in houses without automatic ventilation systems. The air quality sensor is designed at a minimum cost and complexity to allow multi-zone implementation without significant effort. The user interface uses a spatial graphic representation that facilitates understanding areas with different air quality levels. Presentation of the outdoor air quality level supports the user's decision to ventilate a space. An innovative element of the proposed monitoring interface is the real-time forecast of air quality evolution in each monitored space. The paper describes the implementation of an original monitoring solution (monitoring device, Edge/Cloud management system, innovative user monitoring interface) and presents the results of testing this system in a relevant environment. The research conclusions show the proposed solution's benefits in improving the end-user experience, justified both by the technical results obtained and by the opinion of the users who tested the monitoring system. [ABSTRACT FROM AUTHOR]

Multivariate time series have more complex and high‐dimensional characteristics, which makes it difficult to analyze and predict the data accurately. In this paper, a new multivariate time series prediction method is proposed. This method is a generative adversarial networks (GAN) method based on Fourier transform and bi‐directional gated recurrent unit (Bi‐GRU). First, the Fourier transform is utilized to extend the data features, which helps the GAN to better learn the distributional features of the original data. Second, in order to guide the model to fully learn the distribution of the original time series data, Bi‐GRU is introduced as the generator of GAN. To solve the problems of mode collapse and gradient vanishing that exist in GAN, Wasserstein distance is used as the loss function of GAN. Finally, the proposed method is used for the prediction of air quality, stock price and RMB exchange rate. The experimental results show that the model can effectively predict the trend of the time series compared with the other nine baseline models. It significantly improves the accuracy and flexibility of multivariate time series forecasting and provides new ideas and methods for accurate time series forecasting in industrial, financial and environmental fields. [ABSTRACT FROM AUTHOR]

As the share of air conditioning electricity consumption within total grid electricity consumption grows, the decomposition of such consumption becomes increasingly crucial for assessing electricity usage patterns, devising consumption scheduling strategies, and maintaining the stability of the power grid. Although there is a strong correlation between apparent temperature and air conditioning electricity consumption, the literature currently available seldom explores the impact of apparent temperature on this consumption. Moreover, there is a scarcity of effective assessment indices to evaluate the efficacy of air conditioning electricity consumption breakdown. This study introduces a method for decomposing electricity consumption from air conditioning units, utilizing effective duration as a basis to tackle these issues. By employing an apparent temperature model as a constraint, this approach identifies the effective operating time of air conditioning and constructs a constrained convex optimization problem to estimate air conditioning power usage. Additionally, a novel evaluation index for the effectiveness of air conditioning electricity consumption decomposition is proposed, which includes penalties for negative decomposed consumption, alongside the traditional consistency index. Comparative experiments are conducted using real electricity consumption data from Fujian Province. Empirical results indicate that the methodology for air conditioning electricity consumption decomposition presented in this paper aligns more closely with actual conditions. Furthermore, the evaluation metrics introduced for the decomposition of air conditioning electricity consumption are adept at precisely gauging the quality of the air conditioning electricity consumption data. [ABSTRACT FROM AUTHOR]

Individuals' sensitivity to climate hazards is a central component of their vulnerability to climate change. In this paper, we introduce and outline the utility of a new intraindividual variability construct, affective sensitivity to air pollution (ASAP)–defined as the extent to which an individual's affective states fluctuate in accordance with daily changes in air quality. As such, ASAP pushes beyond examination of differences in individuals' exposures to air pollution to examination of differences in individuals' sensitivities to air pollution. Building on known associations between air pollution exposure and adverse mental health outcomes, we empirically illustrate how application of Bayesian multilevel models to intensive repeated measures data obtained in an experience sampling study (N = 150) over one year can be used to examine whether and how individuals' daily affective states fluctuate with the daily concentrations of outdoor air pollution in their county. Results indicate construct viability, as we found substantial interindividual differences in ASAP for both affect arousal and affect valence. This suggests that repeated measures of individuals' day-to-day affect provides a new way of measuring their sensitivity to climate change. In addition to contributing to discourse around climate vulnerability, the intraindividual variability construct and methodology proposed here can help better integrate affect and mental health in climate adaptation policies, plans, and programs. [ABSTRACT FROM AUTHOR]

Effective air quality monitoring and forecasting are essential for safeguarding public health, protecting the environment, and promoting sustainable development in smart cities. Conventional systems are cloud-based, incur high costs, lack accurate Deep Learning (DL)models for multi-step forecasting, and fail to optimize DL models for fog nodes. To address these challenges, this paper proposes a Fog-enabled Air Quality Monitoring and Prediction (FAQMP) system by integrating the Internet of Things (IoT), Fog Computing (FC), Low-Power Wide-Area Networks (LPWANs), and Deep Learning (DL) for improved accuracy and efficiency in monitoring and forecasting air quality levels. The three-layered FAQMP system includes a low-cost Air Quality Monitoring (AQM) node transmitting data via LoRa to the Fog Computing layer and then the cloud layer for complex processing. The Smart Fog Environmental Gateway (SFEG) in the FC layer introduces efficient Fog Intelligence by employing an optimized lightweight DL-based Sequence-to-Sequence (Seq2Seq) Gated Recurrent Unit (GRU) attention model, enabling real-time processing, accurate forecasting, and timely warnings of dangerous AQI levels while optimizing fog resource usage. Initially, the Seq2Seq GRU Attention model, validated for multi-step forecasting, outperformed the state-of-the-art DL methods with an average RMSE of 5.5576, MAE of 3.4975, MAPE of 19.1991%, R2 of 0.6926, and Theil's U1 of 0.1325. This model is then made lightweight and optimized using post-training quantization (PTQ), specifically dynamic range quantization, which reduced the model size to less than a quarter of the original, improved execution time by 81.53% while maintaining forecast accuracy. This optimization enables efficient deployment on resource-constrained fog nodes like SFEG by balancing performance and computational efficiency, thereby enhancing the effectiveness of the FAQMP system through efficient Fog Intelligence. The FAQMP system, supported by the EnviroWeb application, provides real-time AQI updates, forecasts, and alerts, aiding the government in proactively addressing pollution concerns, maintaining air quality standards, and fostering a healthier and more sustainable environment. [ABSTRACT FROM AUTHOR]

This paper addresses the challenges of calibrating low-cost electrochemical sensor systems for air quality monitoring. The proliferation of pollutants in the atmosphere necessitates efficient monitoring systems, and low-cost sensors offer a promising solution. However, issues such as drift, cross-sensitivity, and inter-unit consistency have raised concerns about their accuracy and reliability. The study explores the following three calibration methods for converting sensor signals to concentration measurements: utilizing manufacturer-provided equations, incorporating machine learning (ML) algorithms, and directly applying ML to voltage signals. Experiments were performed in three urban sites in Greece. High-end instrumentation provided the reference concentrations for training and evaluation of the model. The results reveal that utilizing voltage signals instead of the manufacturer's calibration equations diminishes variability among identical sensors. Moreover, the latter approach enhances calibration efficiency for CO, NO, NO2, and O3 sensors while incorporating voltage signals from all sensors in the ML algorithm, taking advantage of cross-sensitivity to improve calibration performance. The Random Forest ML algorithm is a promising solution for calibrating similar devices for use in urban areas. [ABSTRACT FROM AUTHOR]

The purpose of this study was to empirically evaluate the performance of fibrous materials that meet the criteria for inlet air filtration in internal combustion engines. The characteristics of filtration efficiency and accuracy, as well as the characteristics of flow resistance, were determined based on the mass of dust accumulated in the filter bed during the filtration process. Single-layer filter materials tested included cellulose, polyester, and glass microfiber. Multilayer filter media such as cellulose–polyester–nanofibers and cellulose–polyester were also examined. A new composite filter bed—consisting of polyester, glass microfiber, and cellulose—and its filtration characteristics were evaluated. Utilizing specific air filtration quality factors, it was demonstrated that the composite is characterized by high pre-filtration efficiency (99.98%), a short pre-filtration period (qs = 4.21%), high accuracy (dpmax = 1.5–3 µm) for the entire lifespan of the filter, and a 60–250% higher dust absorption coefficient compared to the other tested materials. A filtration composite bed constructed from a group of materials with different filtration parameters can be, due to its high filtration efficiency, accuracy, and dust absorption, an excellent filter material for engine intake air. The composite's filtration parameters will depend on the type of filter layers and their order relative to the aerosol flow. This paper presents a methodology for the selection and testing of various filter materials. [ABSTRACT FROM AUTHOR]

In this paper, we present a city-scale (possibly global) air pollution network made of low-cost sensors for particulate matter concentration in the air. The components of the presented system are based on our research and experience from previous studies focused on air quality instruments and sensors for addressing urban air pollution. Sensor nodes are produced locally and distributed over Sarajevo, Bosnia and Herzegovina. The system collects, calibrates, and displays particulate matter concentrations in real-time. In comparison to the available measurements from governmental institutions, our system demonstrated good agreement of measured parameters, with several advantages including, higher resolution in space and time, lower costs, both horizontal and vertical measurements. One of the capabilities of the system is the real-time air pollution city map with animations. By installing multiple sensor nodes over a slope, we receive vertical measurements of temperature, humidity, and particulate matter concentration in real time, which gives a valuable insight into the dynamics of temperature inversion episodes and air pollution below the inversion layer. [ABSTRACT FROM AUTHOR]

The port of Cartagena, south-east Spain, is noted for its intense activity. This paper presents the influence of the COVID-19 pandemic on the recorded levels of six pollutants. Fifteen years of measurements were used, with two objectives. The first was to investigate how these pollutants evolved, together with their usual cycles. The second objective was to ascertain whether the COVID-19 pandemic had an impact on the concentrations recorded. The results showed that nitrogen oxide concentrations remained steady in the first half of the measurement period and decreased in the second half. SO2 concentrations decreased irregularly, whereas O3 and PM10 presented steady concentrations. The annual cycle was observed for nitrogen oxides and O3. Only SO2 evidenced no weekly cycle. Finally, the analysis of pre- and post-pandemic concentrations revealed a sharp decrease in nitrogen oxides, whereas the pandemic was not seen to have had any impact on the other pollutants. In addition, NO2 emerged as the best indicator of human activity—represented by car and maritime traffic—due to its response to the relaxation measures. Finally, Lamb weather types were calculated. The unclassified type was the most frequent. However, the greatest concentration changes were observed for anticyclonic and eastern flow types. [ABSTRACT FROM AUTHOR]

Mobile monitoring is used as an additional tool to collect air quality data at a high spatial resolution and to complement data from fixed air quality stations. Citizens are interested in contributing to air quality monitoring, and while the availability of low-cost air quality sensors can create opportunities to measure the air quality at a high spatial resolution, the data are often of lower quality, and sensors that measure combustion-related aerosols (like black carbon) are not commonly available. Mobile monitoring using a mid-range instrument can fill this gap. We present the results of a mobile BC (black carbon) monitoring campaign performed by citizens in Mechelen as part of a local citizen observatory (CO), Meet Mee Mechelen, initiated as part of the European H2020 project, Ground Truth 2.0. The goal of the study was two-fold: (1) to propose and evaluate a mobile monitoring method (data collection and data processing) to construct pollution maps of BC concentrations and (2) to demonstrate how to organize community-based air quality monitoring to measure both the spatial and temporal variations in air pollution levels. Measurements were taken during peak hours in four campaigns characterized by different meteorological conditions: October–November 2017, February–March 2018, June–July 2018 and September 2018. The results show large spatial and temporal variabilities. Spatial variability is influenced by traffic volume, stop-and-go traffic and also the building environment and the distance of biking paths from road traffic. The four different campaigns show similar spatial patterns, but due to background and meteorological influences, the absolute concentrations differ between seasons. A rescaling method using data from fixed stations in the air quality monitoring network (AQMN) was presented to construct maps representative of longer periods. This paper shows that mobile measurements can be used by CO to assess the spatial variability of air quality in a city. The data can be used to evaluate mobility plans, carry out hot spot detection, evaluate the exposure of cyclists as a function of cycling infrastructure and perform model validation. However, it is important to use high-quality instruments and apply the correct measurement methodology (number of repetitions, season) to obtain meaningful data. [ABSTRACT FROM AUTHOR]

Low‐cost sensing and the Internet of Things (IoT), present new possibilities for unconventional monitoring of environmental parameters. This paper describes a series of intersecting networks of particulate matter sensors that were deployed across the Birmingham conurbation for a 12‐month period. The networks consisted of a combination of commercially available sensors and University developed sensors. Data from these networks were assimilated with data from a third‐party Zephyr deployment, along with the DEFRA AURN network, which was hosted on an open‐source online platform. This nesting of sensor networks allowed for new insights into sensor performance, including the accuracy of a large network to detect regional concentrations and the number of sensors needed for effective monitoring beyond indicative measurements. After comprehensive data validation steps, the sensors were shown to perform well during co‐location with reference instrumentation (exhibiting slopes of 0.74–1.3). The sensors demonstrated good capability of detecting temporal patterns of regional PM2.5 with the mean of the entire sensor network recording an annual mean PM2.5 concentration within 0.2 μgm−3 of the regulatory network annual mean observation. Network‐derived statistics for estimating urban background concentrations compared to a reference site increase in‐line with the number of sensors available, however when assessing this for near‐source concentrations the importance of sensor location rather than the number of sensors is highlighted. Overall, the network provided novel insights into local concentrations, detecting similar hotspots to those identified by a high‐resolution model. The increased spatial coverage afforded by the sensor network has the potential to support higher resolution evaluation of models and provide unprecedented spatial evidence for air pollution management interventions. [ABSTRACT FROM AUTHOR]

Understanding air quality requires a comprehensive understanding of its various factors. Most of the association rule techniques focuses on high frequency terms, ignoring the potential importance of low- frequency terms and causing unnecessary storage space waste. Therefore, a dynamic genetic association rule mining algorithm is proposed in this paper, which combines the improved dynamic genetic algorithm with the association rule mining algorithm to realize the importance mining of low- frequency terms. Firstly, in the chromosome coding phase of genetic algorithm, an innovative multi-information coding strategy is proposed, which selectively stores similar values of different levels in one storage unit. It avoids storing all the values at once and facilitates efficient mining of valid rules later. Secondly, by weighting the evaluation indicators such as support, confidence and promotion in association rule mining, a new evaluation index is formed, avoiding the need to set a minimum threshold for high-interest rules. Finally, in order to improve the mining performance of the rules, the dynamic crossover rate and mutation rate are set to improve the search efficiency of the algorithm. In the experimental stage, this paper adopts the 2016 annual air quality data set of Beijing to verify the effectiveness of the unit point multi-information coding strategy in reducing the rule storage air, the effectiveness of mining the rules formed by the low frequency item set, and the effectiveness of combining the rule mining algorithm with the swarm intelligence optimization algorithm in terms of search time and convergence. In the experimental stage, this paper adopts the 2016 annual air quality data set of Beijing to verify the effectiveness of the above three aspects. The unit point multi-information coding strategy reduced the rule space storage consumption by 50%, the new evaluation index can mine more interesting rules whose interest level can be up to 90%, while mining the rules formed by the lower frequency terms, and in terms of search time, we reduced it about 20% compared with some meta-heuristic algorithms, while improving convergence. [ABSTRACT FROM AUTHOR]

This paper proposes a clustering approach for multivariate time series with time-varying parameters in a multiway framework. Although clustering techniques based on time series distribution characteristics have been extensively studied, methods based on time-varying parameters have only recently been explored and are missing for multivariate time series. This paper fills the gap by proposing a multiway approach for distribution-based clustering of multivariate time series. To show the validity of the proposed clustering procedure, we provide both a simulation study and an application to real air quality time series data. [ABSTRACT FROM AUTHOR]

In times of growing concern about the impacts of air pollution across the globe, lower-cost sensor technology is giving the first steps in helping to enhance our understanding and ability to manage air quality issues, particularly in regions without established monitoring networks. While the benefits of greater spatial coverage and real-time measurements that these systems offer are evident, challenges still need to be addressed regarding sensor reliability and data quality. Given the limitations imposed by intellectual property, commercial implementations are often "black boxes", which represents an extra challenge as it limits end users' understanding of the data production process. In this paper we present an overview of the QUANT (Quantification of Utility of Atmospheric Network Technologies) study, a comprehensive 3-year assessment across a range of urban environments in the United Kingdom, evaluating 43 sensor devices, including 119 gas sensors and 118 particulate matter (PM) sensors, from multiple companies. QUANT stands out as one of the most comprehensive studies of commercial air quality sensor systems carried out to date, encompassing a wide variety of companies in a single evaluation and including two generations of sensor technologies. Integrated into an extensive dataset open to the public, it was designed to provide a long-term evaluation of the precision, accuracy and stability of commercially available sensor systems. To attain a nuanced understanding of sensor performance, we have complemented commonly used single-value metrics (e.g. coefficient of determination, R2 ; root mean square error, RMSE; mean absolute error, MAE) with visual tools. These include regression plots, relative expanded uncertainty (REU) plots and target plots, enhancing our analysis beyond traditional metrics. This overview discusses the assessment methodology and key findings showcasing the significance of the study. While more comprehensive analyses are reserved for future detailed publications, the results shown here highlight the significant variation between systems, the incidence of corrections made by manufacturers, the effects of relocation to different environments and the long-term behaviour of the systems. Additionally, the importance of accounting for uncertainties associated with reference instruments in sensor evaluations is emphasised. Practical considerations in the application of these sensors in real-world scenarios are also discussed, and potential solutions to end-user data challenges are presented. Offering key information about the sensor systems' capabilities, the QUANT study will serve as a valuable resource for those seeking to implement commercial solutions as complementary tools to tackle air pollution. [ABSTRACT FROM AUTHOR]

Non-exhaust road transport emissions in cities contribute to poor air quality and have an impact on human health. This paper presents a new study of particles emitted by tyre wear in real driving conditions and gives their emission factors. The most frequently emitted particles were collected in urban, suburban and road areas. They were identified and analysed physically and chemically. Their level of toxicity is well known. An overall analysis of the measured pollutants was carried out to assess their emission factors in real driving situations. The highest emitting pollutants, considered separately, were found to have high emission factors. The values obtained exceed the Euro standard for vehicles but are below those of vehicles not equipped with particle filters. Significant test analysis confirmed that the inertia of chemical pollutants is homogeneous. Emission factors have also been provided for PM10 and PM2.5. These results should contribute to the emergence of future regulations of non-exhaust emissions and should help to analyse the exposure-impact relationship for particles from tyre wear. [ABSTRACT FROM AUTHOR]

To explore the relationship between air pollution and total factor productivity and new pathways, This paper examines the impact of air pollution on total factor productivity of A-share listed companies in Shanghai and Shenzhen between 2015 and 2019. It investigates this relationship by considering two pathways: investor sentiment and government attention. The findings indicate that air pollution suppresses total factor productivity of firms. However, air pollution stimulates investor sentiment, which in turn increases R&D investment and total factor productivity, reducing to some extent the dampening effect of air pollution on total factor productivity. There exists a notable positive correlation between air quality and government attention, acting as a mediating variable. This implies that air pollution has the potential to capture the attention of governmental entities, leading to the implementation of appropriate measures aimed at managing and mitigating the occurrence of air pollution caused by industrial enterprises.And the relevant governments should formulate a series of policies to meet the different needs of different enterprises. These two approaches have varying impacts depending on the type of enterprises, thus governments should develop laws to cater to the various demands of different types of enterprises. [ABSTRACT FROM AUTHOR]

The first experimental results of the indoor air quality in two kindergartens located in the Republic of Srpska are presented in this paper. Kindergarten representatives for the year of construction (old and new), building materials, and energy efficiency have been chosen. Indoor air quality measurements (air temperature, relative humidity, ventilation rate, CO2, and radon concentration) were performed during the winter of 2015/2016. Measured indoor air quality parameters are discussed and compared to the international standards BAS EN 16798-1, ASHRAE 62.1, and ISO 7730. The average measured radon concentrations for both buildings have not exceeded the level of 200 Bq/m³, but for reliable results, long-term measurement needs to be performed. The CO2 concentration in the old kindergarten fulfills the BAS EN 16798-1 requirement for Category I during 62.43% of total occupancy time, while for the new kindergarten, it is only 5.79% of full occupancy time. Results of CO2 concentration confirm that good sealing of the envelope of new buildings and user behavior (number of users and natural ventilation) does affect air quality. Furthermore, a high correlation between CO2 concentration and relative humidity in both buildings and a more considerable correlation for the new building have been observed. [ABSTRACT FROM AUTHOR]

The main goal of the TRacking Aerosol Convection interactions ExpeRiment (TRACER) project was to further understand the role that regional circulations and aerosol loading play in the convective cloud life cycle across the greater Houston, Texas, area. To accomplish this goal, the United States Department of Energy and research partners collaborated to deploy atmospheric observing systems across the region. Cloud and precipitation radars, radiosondes, and air quality sensors captured atmospheric and cloud characteristics. A dense lower-atmospheric dataset was developed using ground-based remote sensors, a tethersonde, and uncrewed aerial systems (UASs). TRACER-UAS is a subproject that deployed two UAS platforms to gather high-resolution observations in the lower atmosphere between 1 June and 30 September 2022. The University of Oklahoma CopterSonde and the University of Colorado Boulder RAAVEN (Robust Autonomous Aerial Vehicle – Endurant Nimble) were flown at two coastal locations between the Gulf of Mexico and Houston. The University of Colorado Boulder RAAVEN gathered measurements of atmospheric thermodynamic state, winds and turbulence, and aerosol size distribution. Meanwhile, the University of Oklahoma CopterSonde system operated on a regular basis to resolve the vertical structure of the thermodynamic and kinematic state. Together, a complementary dataset of over 200 flight hours across 61 d was generated, and data from each platform proved to be in strong agreement. In this paper, the platforms and respective data collection and processing are described. The dataset described herein provides information on boundary layer evolution, the sea breeze circulation, conditions prior to and nearby deep convection, and the vertical structure and evolution of aerosols. The quality-controlled TRACER-UAS observations from the CopterSonde and RAAVEN can be found at 10.5439/1969004 (Lappin, 2023) and 10.5439/1985470 (de Boer, 2023), respectively. [ABSTRACT FROM AUTHOR]

Developing air quality management systems to control the impacts of air pollution requires reliable data. However, current initiatives do not provide datasets with large spatial and temporal resolutions for developing air pollution policies in Brazil. Here, we introduce the Brazilian Atmospheric Inventories (BRAIN), the first comprehensive database of air quality and its drivers in Brazil. BRAIN encompasses hourly datasets of meteorology, emissions, and air quality. The emissions dataset includes vehicular emissions derived from the Brazilian Vehicular Emissions Inventory Software (BRAVES), industrial emissions produced with local data from the Brazilian environmental agencies, biomass burning emissions from FINN – Fire INventory from the National Center for Atmospheric Research (NCAR), and biogenic emissions from the Model of Emissions of Gases and Aerosols from Nature (MEGAN) (10.57760/sciencedb.09858, Hoinaski et al., 2023a; 10.57760/sciencedb.09886, Hoinaski et al., 2023b). The meteorology dataset has been derived from the Weather Research and Forecasting Model (WRF) (10.57760/sciencedb.09857, Hoinaski and Will, 2023a; 10.57760/sciencedb.09885, Hoinaski and Will, 2023c). The air quality dataset contains the surface concentration of 216 air pollutants produced from coupling meteorological and emissions datasets with the Community Multiscale Air Quality Modeling System (CMAQ) (10.57760/sciencedb.09859, Hoinaski and Will, 2023b; 10.57760/sciencedb.09884, Hoinaski and Will, 2023d). We provide gridded data in two domains, one covering the Brazilian territory with 20×20 km spatial resolution and another covering southern Brazil with 4×4 km spatial resolution. This paper describes how the datasets were produced, their limitations, and their spatiotemporal features. To evaluate the quality of the database, we compare the air quality dataset with 244 air quality monitoring stations, providing the model's performance for each pollutant measured by the monitoring stations. We present a sample of the spatial variability of emissions, meteorology, and air quality in Brazil from 2019, revealing the hotspots of emissions and air pollution issues. By making BRAIN publicly available, we aim to provide the required data for developing air quality policies on municipal and state scales, especially for under-developed and data-scarce municipalities. We also envision that BRAIN has the potential to create new insights into and opportunities for air pollution research in Brazil.​​​​​​​ [ABSTRACT FROM AUTHOR]

Anthropogenic emissions are the result of many different economic sectors, including transportation, power generation, industrial, residential and commercial activities, waste treatment and agricultural practices. Air quality models are used to forecast the atmospheric composition, analyze observations and reconstruct the chemical composition of the atmosphere during the previous decades. In order to drive these models, gridded emissions of all compounds need to be provided. This paper describes a new global inventory of emissions called CAMS-GLOB-ANT, developed as part of the Copernicus Atmosphere Monitoring Service (CAMS; 10.24380/eets-qd81, Soulie et al., 2023). The inventory provides monthly averages of the global emissions of 36 compounds, including the main air pollutants and greenhouse gases, at a spatial resolution of 0.1° × 0.1° in latitude and longitude, for 17 emission sectors. The methodology to generate the emissions for the 2000–2023 period is explained, and the datasets are analyzed and compared with publicly available global and regional inventories for selected world regions. Depending on the species and regions, good agreements as well as significant differences are highlighted, which can be further explained through an analysis of different sectors as shown in the figures in the Supplement. [ABSTRACT FROM AUTHOR]

The environmental stability of infectious viruses in the laboratory setting is crucial to the transmission potential of human respiratory viruses. Different experimental techniques or conditions used in studies over the past decades have led to diverse understandings and predictions for the stability of viral infectivity in the atmospheric environment. In this paper, we review the current knowledge on the effect of simulated atmospheric conditions on the infectivity of respiratory viruses, mainly focusing on influenza viruses and coronaviruses, including severe acute respiratory syndrome coronavirus 2 and Middle East respiratory syndrome coronavirus. First, we summarize the impact of the experimental conditions on viral stability; these involve the methods of viral aerosol generation, storage during aging and collection, the virus types and strains, the suspension matrixes, the initial inoculum volumes and concentrations, and the drying process. Second, we summarize and discuss the detection methods of viral infectivity and their disadvantages. Finally, we integrate the results from the reviewed studies to obtain an overall understanding of the effects of atmospheric environmental conditions on the decay of infectious viruses, especially aerosolized viruses. Overall, this review highlights the knowledge gaps in predicting the ability of viruses to maintain infectivity during airborne transmission. [ABSTRACT FROM AUTHOR]

This paper introduces FUME 2.0, an open-source emission processor for air quality modeling, and documents the software structure, capabilities, and sample usage. FUME provides a customizable framework for emission preparation tailored to user needs. It is designed to work with heterogeneous emission inventory data, unify them into a common structure, and generate model-ready emissions for various chemical transport models (CTMs). Key features include flexibility in input data formats, support for spatial and temporal disaggregation, chemical speciation, and integration of external models like MEGAN. FUME employs a modular Python interface and PostgreSQL/PostGIS backend for efficient data handling. The workflow comprises data import, geographical transformation, chemical and temporal disaggregation, and output generation steps. Outputs for mesoscale CTMs CMAQ, CAMx, and WRF-Chem and the large-eddy-simulation model PALM are implemented along with a generic NetCDF format. Benchmark runs are discussed on a typical configuration with cascading domains, with import and preprocessing times scaling near-linearly with grid size. FUME facilitates air quality modeling from continental to regional and urban scales by enabling effective processing of diverse inventory datasets. [ABSTRACT FROM AUTHOR]

In this paper, the design and research of a sensor-based personal air-quality monitoring device are presented, which is retrofitted into different personal protective face masks. Due to its small size and low power consumption, the device can be integrated into and applied in practical urban usage. We present our research and the development of the sensor node based on a BME680-type environmental sensor cluster with a wireless IoT (Internet of Things)-capable central unit and overall low power consumption. The integration of the sensor node was investigated with traditional medical masks and a professional FFP2-type mask. The filtering efficiency after embedding was validated with a head model and a particle counter. We found that the professional mask withstood the embedding without losing the protective filtering aspect. We compared the inner and outer sensor data and investigated the temperature, pressure, humidity, and AQI (Air Quality Index) relations with possible sensor data-fusion options. The novelty is increased with the dual-sensor layout (inward and outward). It was found that efficient respiration monitoring is achievable with the device. With the analysis of the recorded data, characteristic signals were identified in an urban environment, enabling urban altimetry and urban zone detection. The results promote smart city concepts and help in endeavors related to SDGs (Sustainable Development Goals) 3 and 11. [ABSTRACT FROM AUTHOR]

Air quality in school environments is of particular interest due to the significant amount of time children spend in these settings. Children, being a particularly sensitive demographic, are exposed to various pollutants at school or kindergarten. In this regard, our studies have focused on monitoring the concentrations of three main categories of pollutants: VOCs (volatile organic compounds), VICs and PM (particulate matter). We conducted two experimental campaigns in seven classrooms within public educational institutions. The average concentration values of TVOC (total volatile organic compounds) ranged from 554 µg/m3 to 2518 µg/m3, of CO2 from 1055 ppm to 2050 ppm, of NH₃ (Ammonia) from 843.2 µg/m3 to 1403.4 µg/m3, of PM2.5 from 25.1 µg/m3 to 89.9 µg/m3, and of PM10 from 63.7 µg/m3 to 307.4 µg/m3. In most instances, the registered values exceeded the limit values set by national or international regulations. Furthermore, this study highlights the significant impact of a heat recovery ventilation system in improving indoor air quality by substantially reducing the levels of CO2 and PM. However, it also underscores the need for further measures to more efficiently reduce TVOC concentrations. The aim of our paper was to enhance the understanding of pollution levels in school environments, increase awareness of the importance of indoor air quality, and highlight the adverse effects of polluted air on the health of occupants. [ABSTRACT FROM AUTHOR]

This paper discusses the newly developed Decision Support System version 1.0 (DSS v1.0) for air quality management activities in Delhi, India. In addition to standard air quality forecasts, DSS provides the contribution of Delhi, its surrounding districts, and stubble-burning fires in the neighboring states of Punjab and Haryana to the PM2.5 load in Delhi. DSS also quantifies the effects of local and neighborhood emission-source-level interventions on the pollution load in Delhi. The DSS-simulated Air Quality Index for the post-monsoon and winter seasons of 2021–2022 shows high accuracy (up to 80 %) and a very low false alarm ratio (∼ 20 %) from day 1 to day 5 of the forecasts, especially when the ambient air quality index (AQI) is > 300. During the post-monsoon season (winter season), emissions from Delhi, the rest of the National Capital Region (NCR)'s districts, biomass-burning activities, and all other remaining regions on average contribute 34.4 % (33.4 %), 31 % (40.2 %), 7.3 % (0.1 %), and 27.3 % (26.4 %), respectively, to the PM2.5 load in Delhi. During peak pollution events (stubble-burning periods or wintertime), however, the contribution from the main sources (farm fires in Punjab–Haryana or local sources within Delhi) could reach 65 %–69 %. According to DSS, a 20 % (40 %) reduction in anthropogenic emissions across all NCR districts would result in a 12 % (24 %) reduction in PM2.5 in Delhi on a seasonal mean basis. DSS is a critical tool for policymakers because it provides such information daily through a single simulation with a plethora of emission reduction scenarios. [ABSTRACT FROM AUTHOR]

Measuring the systemic impact of major public health emergencies on the light industry and preventing various uncertain future external risks have become the key challenges to ensuring the stability of the light industry. This paper takes the occurrence of major public health emergencies as the background and focuses on environmental issues such as air pollution and indoor air quality degradation during emergencies. And to explore the multiscale impact of major public health emergencies on the light industry, typical light industry subsectors, and light industry enterprises. The findings of our study reveal that major public health emergencies have a negative impact on the light industry, particularly in the form of a short-term decline in exports, which tends to converge in the long run. Further, it is also revealed that there is heterogeneity in the impact on environmentally sensitive industries, labor-intensive industries, and others. At the microfirm level, major public health emergencies have shown a negative effect, especially the recent pandemic, which has a longer duration and a wider reach. Through multiscale research, this paper provides policy suggestions to improve the macrogovernance mechanism and risk prevention system for the light industry. [ABSTRACT FROM AUTHOR]

Predicting particulate matter with a diameter of 10 μm (PM10) is crucial due to its impact on human health and the environment. Today, aerosol optical depth (AOD) offers high resolution and wide coverage, making it a viable way to estimate PM concentrations. Recent years have also witnessed in-creasing promise in refining air quality predictions via deep neural network (DNN) models, out-performing other techniques. However, learning the weights and biases of the DNN is a task classified as an NP-hard problem. Current approaches such as gradient-based methods exhibit significant limitations, such as the risk of becoming ensnared in local minimal within multi-objective loss functions, substantial computational requirements, and the requirement for continuous objective functions. To tackle these challenges, this paper introduces a novel approach that combines the binary gray wolf optimizer (BGWO) with DNN to improve the optimization of models for air pollution prediction. The BGWO algorithm, inspired by the behavior of gray wolves, is used to optimize both the weight and bias of the DNN. In the proposed BGWO, a novel sigmoid function is proposed as a transfer function to adjust the position of the wolves. This study gathers meteorological data, topographic information, PM10 pollution data, and satellite images. Data preparation includes tasks such as noise removal and handling missing data. The proposed approach is evaluated through cross-validation using metrics such as correlation rate, R square, root-mean-square error (RMSE), and accuracy. The effectiveness of the BGWO-DNN framework is compared to seven other machine learning (ML) models. The experimental evaluation of the BGWO-DNN method using air pollution data shows its superior performance compared with traditional ML techniques. The BGWO-DNN, CapSA-DNN, and BBO-DNN models achieved the lowest RMSE values of 16.28, 19.26, and 20.74, respectively. Conversely, the SVM-Linear and GBM algorithms displayed the highest levels of error, yielding RMSE values of 36.82 and 32.50, respectively. The BGWO-DNN algorithm secured the highest R2 (88.21%) and accuracy (93.17%) values, signifying its superior performance compared with other models. Additionally, the correlation between predicted and actual values shows that the proposed model surpasses the performance of other ML techniques. This paper also observes relatively stable pollution levels during spring and summer, contrasting with significant fluctuations during autumn and winter. [ABSTRACT FROM AUTHOR]

Imported air pollution has a significant impact on urban air quality. Relevant studies have shown that many urban air pollution events are not resourced by local emissions but are imported by air pollution from surrounding areas transported across regions. The prevention and control of air pollution is very necessary. However, the existing supervision of urban air quality mostly relies on ground monitoring stations, which are extremely limited in time and space, and cannot satisfy continuous time-space air pollution research. Therefore, aiming at the problem of urban air pollution control, this paper used MERRA-2 reanalysis data and ground monitoring data to establish a "Time-Longitude-Latitude" three-dimensional pollution curve, and then a genetic algorithm was used to optimize its fitting. This study finally reconstructed the imported air pollution transmission route. This paper takes an air pollution event that occurred in Xuzhou City, China, on 12 January 2020, as an example. Through the analysis of aerosol optical depth (AOD), particulate matter (PM), wind speed, and other factors, we found the source, transmission route, and impact time of this pollution. We have verified the correctness and accuracy of the reconstructed contamination transport paths. It is proved that the method is universal and it can quickly and accurately restore the air pollution transmission route and identify the urban imported air pollution transmission entrance. This method will also provide strong data support for the division of responsibilities of environmental protection departments in various regions for severe air pollution transmission events and provide effective governance ideas for the prevention and control of imported air pollution in recipient cities. [ABSTRACT FROM AUTHOR]

In today's urban environments, accurately measuring and forecasting air pollution is crucial for combating the effects of pollution. Machine learning (ML) is now a go-to method for making detailed predictions about air pollution levels in cities. In this study, we dive into how air pollution in urban settings is measured and predicted. Using the PRISMA methodology, we chose relevant studies from well-known databases such as PubMed, Springer, IEEE, MDPI, and Elsevier. We then looked closely at these papers to see how they use ML algorithms, models, and statistical approaches to measure and predict common urban air pollutants. After a detailed review, we narrowed our selection to 30 papers that fit our research goals best. We share our findings through a thorough comparison of these papers, shedding light on the most frequently predicted air pollutants, the ML models chosen for these predictions, and which ones work best for determining city air quality. We also take a look at Skopje, North Macedonia's capital, as an example of a city still working on its air pollution measuring and prediction systems. In conclusion, there are solid methods out there for air pollution measurement and prediction. Technological hurdles are no longer a major obstacle, meaning decision-makers have ready-to-use solutions to help tackle the issue of air pollution. [ABSTRACT FROM AUTHOR]

Air pollution is a serious problem that affects economic development and people's health, so an efficient and accurate air quality prediction model would help to manage the air pollution problem. In this paper, we build a combined model to accurately predict the AQI based on real AQI data from four cities. First, we use an ARIMA model to fit the linear part of the data and a CNN-LSTM model to fit the non-linear part of the data to avoid the problem of blinding in the CNN-LSTM hyperparameter setting. Then, to avoid the blinding dilemma in the CNN-LSTM hyperparameter setting, we use the Dung Beetle Optimizer algorithm to find the hyperparameters of the CNN-LSTM model, determine the optimal hyperparameters, and check the accuracy of the model. Finally, we compare the proposed model with nine other widely used models. The experimental results show that the model proposed in this paper outperforms the comparison models in terms of root mean square error (RMSE), mean absolute error (MAE) and coefficient of determination (R2). The RMSE values for the four cities were 7.594, 14.94, 7.841 and 5.496; the MAE values were 5.285, 10.839, 5.12 and 3.77; and the R2 values were 0.989, 0.962, 0.953 and 0.953 respectively. [ABSTRACT FROM AUTHOR]

Nitrogen cycling in northern temperate forest ecosystems could change under increasing atmospheric CO2 and tropospheric O3 as a result of quantitative and qualitative changes in plant litter production. At the Aspen Free Air CO2–O3 Enrichment (FACE) experiment, we previously found that greater substrate inputs to soil under elevated CO2 did not alter gross N transformation rates in the first 3 years of the experiment. We hypothesized that greater litter production under elevated CO2 would eventually cause greater gross N transformation rates and that CO2 effects would be nullified by elevated O3. Following our original study, we continued measurement of gross N transformation rates for an additional four years. From 1999 to 2003, gross N mineralization doubled, N immobilization increased 4-fold, but changes in microbial biomass N and soil total N were not detected. We observed year-to-year variation in N transformation rates, which peaked during a period of foliar insect damage. Elevated CO2 caused equivalent increases in gross rates of N mineralization (+34%) and NH immobilization (+36%). These results indicate greater rates of N turnover under elevated CO2, but do not indicate a negative feedback between elevated CO2 and soil N availability. Elevated O3 decreased gross N mineralization (−16%) and had no effect on NH immobilization, indicating reduced N availability under elevated O3. The effects of CO2 and O3 on N mineralization rates were mainly related to changes in litter production, whereas effects on N immobilization were likely influenced by changes in litter chemistry and production. Our findings also indicate that concomitant increases in atmospheric CO2 and O3 could lead to a negative feedback on N availability. [ABSTRACT FROM AUTHOR]

This paper investigates the Indoor Environmental Quality (IEQ) factors influencing occupant satisfaction in commercial buildings in Iran, contrasting the views of building experts (architects and engineers) with those of building occupants. Employing the fuzzy analytical hierarchy process (FAHP), this study focuses on the four primary IEQ factors: thermal comfort, indoor air quality, visual comfort, and acoustic comfort. The study aims to bridge the gap between expert evaluations and occupant perceptions of IEQ factors in commercial buildings in Iran. By examining the disparities in prioritising IEQ factors between these two groups, the study sheds light on the complexities of IEQ assessment and highlights the importance of considering diverse perspectives in optimising indoor environments. Our methodology includes a survey conducted among 30 building experts (15 architects and 15 building engineers) and 102 occupants, employing FAHP to derive the relative importance weights of each IEQ factor. The results highlight significant disparities between architects, engineers, and occupants in prioritising these factors. Architects emphasise visual comfort (42%), while engineers and occupants view thermal comfort (53% and 41%) as the most crucial factor for occupant satisfaction. The study underscores the complexity of IEQ in commercial buildings and the diverse perspectives influencing its assessment. It contributes to the broader discourse on optimising IEQ, emphasising the need for a comprehensive approach that encompasses both technical expertise and occupant experience. [ABSTRACT FROM AUTHOR]

The significance of air quality monitoring for analyzing impact on public health is growing worldwide. A crucial part of smart city development includes deployment of suitable air pollution sensors at critical locations. Note that there are various air quality measurement instruments, ranging from expensive reference stations that provide accurate data to low-cost sensors that provide less accurate air quality measurements. In this research, we use a combination of sensors and monitors, which we call hybrid instruments, and focus on optimal placement of such instruments across a region. The objective of the problem is to maximize a satisfaction function that quantifies the weighted closeness of different regions to the places where such hybrid instruments are placed (here weights for different regions are quantified in terms of the relative population density and relative PM 2.5 concentration). Note that there can be several constraints such as those on budget, the minimum number of reference stations to be placed, or the set of important regions where at least one sensor should be placed. We develop two algorithms to solve this problem. The first one is a genetic algorithm that is a metaheuristic and that works on the principles of evolution. The second one is a greedy algorithm that selects the locally best choice in each iteration. We test these algorithms on different regions from India with varying sizes and other characteristics such as population distribution, PM 2.5 emissions, or available budget. The insights obtained from this paper can be used to quantitatively place reference stations and sensors in large cities rather than using ad hoc procedures or rules of thumb. [ABSTRACT FROM AUTHOR]

In this paper, multi-source observation, such as aircraft, ground-based remote sensing, and satellite-retrieved data, has been utilized to compare and analyze the vertical characteristics of aerosol optical properties and the planetary boundary layer height (HPBL) over the North China Plain (NCP) region during May–June 2016. Aircraft observations show the vertical profiles of aerosol absorption coefficients (σabs), scattering coefficients (σsca), and extinction coefficients (σext) gradually decrease with altitude, with their maximum values near HPBL. The vertical profiles of σext depended most on the vertical distribution of measured σsca, indicating a significant contribution of scattering aerosols. In addition, the prominent characteristic of the inverse relationship between σext and moisture profile could serve as a reference for predicting air quality in the NCP region. The lower layer pollution during the field experiment was likely caused by the accumulation of fine-mode aerosols, characterized by the vertical distribution of the Ångström exponent and the Aerosol Robotic Network (AERONET) products. Typically, HPBL derived from aircraft and surface Micro Pulse Lidar (MPL) was approximate, while the predicted HPBL by meteorological data indicates an underestimation of ~192 m. Aerosol optical depth (AOD) calculated from aircraft and ground-based remote sensing (such as MPL and AERONET) experienced a strong correlation, and both of them exhibited a similar tendency. However, the AOD retrieved from satellites was significantly larger than that from aircraft and ground-based remote sensing. Overall, the inversion algorithm, cloud identification algorithm, representativeness of the space, and time of the observation may lead to an overestimation or underestimation of AOD under certain circumstances. This study may serve as a re-evaluation of AOD retrieved from multi-source observations and provide a reference to uncover the actual atmospheric environment in the NCP regions. [ABSTRACT FROM AUTHOR]

Trajectory ensemble receptor models (TERMs) were widely used to determine the likely source locations and apportionment of air pollutants. This paper describes the development and applications of the Trajectory-ensemble Potential Source Apportionment Web application (TraPSA-Web), a comprehensive toolkit for likely atmospheric pollutant source location apportionments using TERMs and back trajectories generated with the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The TERMs integrated within the TraPSA-web include Concentration Field Analysis (CFA), Concentration Weighted Trajectory (CWT), single-site and multiple-site Potential Source Contribution Function (PSCF), and Simplified Quantitative Transport Bias Analysis (SQBA). TraPSA-Web is designed as a web application with a user-friendly modern graphical user interface (GUI), which largely enhances the accessibility to the users. TraPSA-Web will provide the air quality research community with a sophisticated toolkit for (1) easy management of the research project and datasets, (2) efficient automatization for HYSPLIT configurations, calculations, and result aggregations, (3) flexible configurations for the research scenarios and TERM parameters, and (4) interactive visualizations for the pollutant pattern analysis and TERM result mapping. [ABSTRACT FROM AUTHOR]

Objectives: The COVID-19 pandemic has been a major public health concern for the past 3 years. Scientific evidence on the relationship between SARS-CoV-2 infection and indoor air quality still needs to be demonstrated. This scoping review aims to study the association between air quality indoors and COVID-19. Methods: A scoping review analyzing the association between indoor air quality and epidemiological outcomes was conducted. Papers published between 1 January 2020 and 31 October 2022 were included. Hospital settings were excluded from the study. Results: Eight relevant articles met the inclusion criteria. Indoor settings included workplaces, schools, restaurants, and public transport. Types of ventilation used to improve indoor air quality were dilution methods (opening windows) and mechanical systems with or without filtration or purifier. CO2 sensors were employed in one study. All the studies showed a positive association between indoor air quality and its improvement and epidemiological indicators. Conclusion: The findings of this scoping review indicate that indoor air quality, which can be improved with ventilation methods, may reduce the risk of developing COVID-19. Ventilation could thus be viewed as a possible effective mitigating method. [ABSTRACT FROM AUTHOR]

The Environmental Protection Agency of the Republic of Serbia continuously monitors and collects air quality parameters at numerous measuring points throughout the country. The results revealed that the levels of air pollution recorded during the lockdown differed from those recorded during the same period the previous years. In this paper, we examined pollutant concentration trends in 2020 and a few previous years to determine the underlying causes of these trends. Pollutants are measured at five stations in Belgrade from the beginning of March to the end of July between 2015 and 2020. Because no hourly data were available, NO2, SO2, and suspended particles PM10 and PM2.5 are average daily values, whereas CO and ozone are daily 8-hour maximums. Concentrations were compared and averaged only when data for the same period over time was available, i.e. when comparing 2020 to previous years. The results were compared to the annual and daily limit values (for ozone and CO 8 hours maximum, respectively), as well as the variations in concentrations over time. The goal of calculating and displaying these values is to specifically identify a change in air pollution during the COVID-19 virus pandemic isolation period. In general, for Belgrade in 2020, NO2 concentrations are lower at four stations, PM2.5 concentrations are lower at two stations, PM10 concentrations are higher at one station and lower at another, and SO2 concentrations are higher than in previous years (2015-2019). [ABSTRACT FROM AUTHOR]

This paper highlights the advantages of an affordable multi-wavelength ground-based camera, called WaltRCam, for monitoring Aerosol Optical Depth (AOD) in a clear case over a peri-urban area. To simulate the performance of this low-cost camera, for which data are not yet available, we use data from an expensive hyperspectral camera (HSI) to mimic its characteristics. Our methodology is based on the construction of look-up tables using the DART (Discrete Anisotropic Radiative Transfer) 3D radiative transfer model. DART simulates the different spectra observed by the WaltRCam camera, which then provides the AODs for all image pixels in near-real-time. Moreover, DART is coupled to a 3D scale-model of the city of Toulouse (dating from 2014) to model complex urban geometries and to associate specific optical properties to the various objects that make up the environment. Moreover, we use a neural-network-based method to recognize the various objects in the image in order to take into account only pixels common between the observations. In this way, we take account of changes to the peri-urban area, such as vegetation growth, construction, demolition of buildings, etc. The results of this study show that the WaltRCam camera, by capturing eight wavelengths, can deliver convincing results compared with ground and satellite reference data, with a correlation coefficient of 0.9 and an average RMSE of less than 0.02. [ABSTRACT FROM AUTHOR]

Hybrid approaches combining machine learning with traditional inverse problem solution methods represent a promising direction for the further development of inverse modeling algorithms. The paper proposes an approach to emission source identification from measurement data for advection–diffusion–reaction models. The approach combines general-type source identification and post-processing refinement: first, emission source identification by measurement data is carried out by a sensitivity operator-based algorithm, and then refinement is done by incorporating a priori information about unknown sources. A general-type distributed emission source identified at the first stage is transformed into a localized source consisting of multiple point-wise sources. The second, refinement stage consists of two steps: point-wise source localization and emission rate estimation. Emission source localization is carried out using deep learning with convolutional neural networks. Training samples are generated using a sensitivity operator obtained at the source identification stage. The algorithm was tested in regional remote sensing emission source identification scenarios for the Lake Baikal region and was able to refine the emission source reconstruction results. Hence, the aggregates used in traditional inverse problem solution algorithms can be successfully applied within machine learning frameworks to produce hybrid algorithms. [ABSTRACT FROM AUTHOR]

Air quality is an important environmental component that has a significant influence on public health and well-being. Poor air quality can cause a variety of health problems, including respiratory and cardiovascular disorders. Therefore, there is a growing demand for air quality prediction tools to enable consumers and authorities to take the best decisions and to implement the necessary actions to reduce air pollution. The present paper describes an innovative application that uses machine learning techniques to supply to the users real-time air quality predictions made on past data from their unique location. The Scikit-learn Python package was used to implement five machine learning algorithms, including K-Nearest Neighbors, Random Forest, Gradient Boosting, Support Vector Regression (SVR) and AdaBoost. To achieve robust model performance, compatibility with cross-validation approaches was evaluated. The obtained results indicate that these machine learning techniques are successful at forecasting air quality. The AdaBoost method emerged as the best accurate predictor after extensive investigation, closely followed by Gradient Boosting, SVR, Random Forest, and KNearest Neighbors. Furthermore, the investigation also focused on the adapted handling of inaccurate data and providing graphical visualizations to highlight the algorithm's efficacy. [ABSTRACT FROM AUTHOR]

The objective of this study is to carry out a survey of the different studies that have been carried out in Cuba in terms of ecosystem services valuation. It is a path little traveled and on rise that requires the detection of its strengths and gaps as a guide to the execution of said investigations with de human capital that the country possesses. A total of 42 papers were compiled, including 14 scientific articles, 8 diploma theses, 15 doctoral theses and 5 master´s theses. The ecosystem services most evaluated were those of fibre and food supply, the regulation of climate, water, natural hazard and air quality and within cultural services, aesthetic values and recreation and ecotourism. [ABSTRACT FROM AUTHOR]

The profound impacts of severe air pollution on human health, ecological balance, and economic stability are undeniable. Precise air quality forecasting stands as a crucial necessity, enabling governmental bodies and vulnerable communities to proactively take essential measures to reduce exposure to detrimental pollutants. Previous research has primarily focused on predicting air quality using only time-series data. However, the importance of remote-sensing image data has received limited attention. This paper proposes a new multi-modal deep-learning model, Res-GCN, which integrates high spatial resolution remote-sensing images and time-series air quality data from multiple stations to forecast future air quality. Res-GCN employs two deep-learning networks, one utilizing the residual network to extract hidden visual information from remote-sensing images, and another using a dynamic spatio-temporal graph convolution network to capture spatio-temporal information from time-series data. By extracting features from two different modalities, improved predictive performance can be achieved. To demonstrate the effectiveness of the proposed model, experiments were conducted on two real-world datasets. The results show that the Res-GCN model effectively extracts multi-modal features, significantly enhancing the accuracy of multi-step predictions. Compared to the best-performing baseline model, the multi-step prediction's mean absolute error, root mean square error, and mean absolute percentage error increased by approximately 6%, 7%, and 7%, respectively. [ABSTRACT FROM AUTHOR]

The aim of this concept paper is the description of a new tool to support institutions in the implementation of targeted countermeasures, based on quantitative and multi-scale elements, for the fight and prevention of emergencies, such as the current COVID-19 pandemic. The tool is a cloud-based centralized system; a multi-user platform that relies on artificial intelligence (AI) algorithms for the processing of heterogeneous data, which can produce as an output the level of risk. The model includes a specific neural network which is first trained to learn the correlations between selected inputs, related to the case of interest: environmental variables (chemical–physical, such as meteorological), human activity (such as traffic and crowding), level of pollution (in particular the concentration of particulate matter) and epidemiological variables related to the evolution of the contagion. The tool realized in the first phase of the project will serve later both as a decision support system (DSS) with predictive capacity, when fed by the actual measured data, and as a simulation bench performing the tuning of certain input values, to identify which of them led to a decrease in the degree of risk. In this way, we aimed to design different scenarios to compare different restrictive strategies and the actual expected benefits, to adopt measures sized to the actual needs, adapted to the specific areas of analysis and useful for safeguarding human health; and we compared the economic and social impacts of the choices. Although ours is a concept paper, some preliminary analyses have been shown, and two different case studies are presented, whose results have highlighted a correlation between NO 2 , mobility and COVID-19 data. However, given the complexity of the virus diffusion mechanism, linked to air pollutants but also to many other factors, these preliminary studies confirmed the need, on the one hand, to carry out more in-depth analyses, and on the other, to use AI algorithms to capture the hidden relationships among the huge amounts of data to process. [ABSTRACT FROM AUTHOR]

In order to avoid complex processes of changes, or weathering (decay) of freshwater limestones embedded in numerous buildings and/or monuments due to interaction with various environmental conditions (external factors), builders have always tried to avoid construction (internal) factors, such as the selection of stone, the method and (often too small) depth of its extraction from the deposit for the construction of significant buildings, insufficient aging (storage) after extraction, improper installation (stacking) of stone in relation to its position in the deposit, as well as mistakes in stone processing and execution, in addition to inadequate maintenance. This paper presents the complex processes of changes, or weathering (decay) of freshwater limestones embedded in buildings and monuments as a result of its interaction with various environmental conditions (external factors), such as: the effects of temperature, humidity and quality of air, winds, precipitation, acidic rain, exhaust gases, micro-particles and organisms in the air and water, harmful salts, radiation, soil, biological colonization, along with the destructive action of man. In this process, the aesthetic deterioration of the stone surface is only a secondary problem compared to the destruction of its structure. The consideration must certainly include the pollution flows and the environment, and meteorological and microclimatic conditions. [ABSTRACT FROM AUTHOR]