Search

Introduction: A positive childbirth experience promotes women's health, both during and beyond the perinatal period. Understanding what constitutes a positive childbirth experience is thus critical to providing high‐quality maternity care. Currently, there is no clear, inclusive, woman‐centered definition of a positive childbirth experience to guide practice, education, and research. Aim: To formulate an inclusive woman‐centered definition of a positive childbirth experience. Methods: A six‐step process was undertaken: (a) Key concepts associated with a positive childbirth were derived from a rapid literature review; (b) The key concepts were used by interdisciplinary experts in the author group to create a draft definition; (c) The draft definition was presented to clinicians and researchers during a European research meeting on perinatal mental health; (d) The authors integrated the expert feedback to refine the working definition; (e) A revised definition was shared with women from consumer groups in six countries to confirm its face validity; and (f) A final definition was formulated based on the women's feedback (n = 42). Results: The following definition was formulated: "A positive childbirth experience refers to a woman's experience of interactions and events directly related to childbirth that made her feel supported, in control, safe, and respected; a positive childbirth can make women feel joy, confident, and/or accomplished and may have short and/or long‐term positive impacts on a woman's psychosocial well‐being." Conclusions: This inclusive, woman‐centered definition highlights the importance of provider interactions for facilitating a positive childbirth experience. Feeling supported and having a sense of control, safety, and respect are central tenets. This definition could help to identify and validate positive childbirth experience(s), and to inform practice, education, research, advocacy, and policy‐making. [ABSTRACT FROM AUTHOR]

Optimal foraging theory predicts that well‐defended potential foods should be exploited only when energy pay‐offs are great. Although stinging hymenopteran nests are both well‐defended and predated by primates, their larvae's energy yields rarely have been calculated, and predation‐linked foraging behaviours by primates infrequently documented. Based on 58 opportunistic observations of primates raiding wasp nests for larvae, we calculated energetic yields of low‐ and high‐risk wasp nest predation for Cebus albifrons, Saimiri collinsi, S. sciureus and Sapajus apella, and tested predictions derived from optimal foraging theory. We recorded how nests were processed and by which age‐sex classes, eaten nest fragment sizes, number of occupied and empty cells, and nest occupancy patterns (percent larvae/pupae, eggs, empty cells). Basal metabolic rate (BMR) calculations showed energetic yields from 15 min foraging on low‐risk nests (Polybia quadricincta) would meet energy needed to sustain adult female and male C. albifrons BMR for 4.9 and 4.5 h, respectively; yields from high‐risk (Chartergus artifex) nests for 6.5 and 6.2 h; Mischocyttarus sp. nest yields (low risk, but mimetically resembling other wasps) would meet S. collinsi BMR for 2.9 h (female) and 2.3 h (male), and 2.6 and 2.1 h, for the slightly larger S. sciureus, respectively. The Chartergus energetic‐yield value is nearly 20% of a 36 g chocolate bar (741 kJ). Our data provide quantitative support for the common assertion that wasp larvae and pupae are high‐yield foods for primates. As predicted by optimal foraging, energetic yield is sufficient to offset the risk and pain of being stung. [ABSTRACT FROM AUTHOR]

This article is a guest editorial for the IET Radar, Sonar & Navigation journal, focusing on selected papers from the RADAR 2022 conference held in Edinburgh, UK. The conference provided an opportunity for radar specialists from 22 countries to explore the latest developments in radar systems. Key topics discussed at the conference included new radar trends, target detection (with a focus on drones), low-frequency radar, and cognitive radar. The special issue contains 17 papers based on extended work presented at the conference, covering topics such as multistatic radar, passive radar, target signatures, and advanced radar processing techniques. The authors hope that this special issue will serve as a valuable resource for further research in the field. [Extracted from the article]

The high uncertainty around the COVID‐19 pandemic elicited an unprecedented level of panic buying during the early months. Using the framework of stress and coping, the current study conceptualized and tested a theoretical model that predicts individuals' panic buying in two countries. A survey of US (n = 311) and Korean consumers (n = 347) revealed that negative emotions (loneliness and anxiety) contributed to panic buying, yet two important coping resources, resilience and social support, were effective in protecting consumers from engaging in a maladaptive coping strategy. The hypothesis that collectivism (vs. individualism) would make consumers rely on social (vs. personal) coping resources was partially supported. The results highlight the unique circumstance of the global pandemic in which social support works as both a resource for healthy coping and a source to increase negative emotions, and call for future investigation of the complex role of social support in the context of stress and coping theory. [ABSTRACT FROM AUTHOR]

The insulation paper is a crucial factor for evaluating the insulation status of transformers. The traditional evaluation methods for insulation paper are dissolved gas component content analysis (CO and CO2) and furfural (2‐FAL) content analysis in oil. The detection principle of the former leads to its low accuracy, while the field application effect of the latter is not ideal due to the easy oxidation of furfural and low content. Methanol, result of its good stability and high production compared with other marker products (CO, CO2, 2‐FAL) has been investigated as a novel marker for aging evaluation of transformer insulating paper in recent years. The results of the investigation indicated that there is a good correlation between the content of methanol in oil and the degree of polymerization under laboratory conditions, which reflected the insulation aging state of the transformer insulating paper more accurately. This paper summarizes the current research status of methanol formation mechanism, detection methods and aging evaluation in insulating oil, and points out the key problems to be solved and development prospects, hoping to provide relevant reference for aging evaluation of oil immersed power transformer. [ABSTRACT FROM AUTHOR]

The growing usage and consumption of electronics‐integrated items into the daily routine has raised concerns on the disposal and proper recycling of these components. Here, a fully sustainable and green technology for the fabrication of different electronics on fruit‐waste derived paper substrate, is reported. The process relies on the carbonization of the topmost surface of different cellulose‐based substrates, derived from apple‐, kiwi‐, and grape‐based processes, by a CO2 laser. By optimizing the lasing parameters, electronic devices, such as capacitors, biosensors, and electrodes for food monitoring as well as heart and respiration activity analysis, are realized. Biocompatibility tests on fruit‐based cellulose reveal no shortcoming for on‐skin applications. The employment of such natural and plastic‐free substrate allows twofold strategies for electronics recycling. As a first approach, device dissolution is achieved at room temperature within 40 days, revealing transient behavior in natural solution and leaving no harmful residuals. Alternatively, the cellulose‐based electronics is reintroduced in nature, as possible support for plant seeding and growth or even soil amendment. These results demonstrate the realization of green, low‐cost and circular electronics, with possible applications in smart agriculture and the Internet‐of‐Thing, with no waste creation and zero or even positive impact on the ecosystem. [ABSTRACT FROM AUTHOR]

Point‐of‐care testing (POCT) can be the method of choice for detecting infectious pathogens; these pathogens are responsible for not only infectious diseases such as COVID‐19, but also for certain types of cancers. For example, infections by human papillomavirus (HPV) or Helicobacter pylori (H. pylori) are the main cause of cervical and stomach cancers, respectively. COVID‐19 and many cancers are treatable with early diagnoses using POCT. A variety of nucleic acid testing have been developed for use in resource‐limited environments. However, questions like unintegrated nucleic acid extraction, open detection systems increase the risk of cross‐contamination, and dependence on expensive equipment and alternating current (AC) power supply, significantly limit the application of POCT, especially for on‐site testing. In this paper, a simple portable platform is reported capable of rapid sample‐to‐answer testing within 30 min based on recombinase polymerase amplification (RPA) at a lower temperature, to detect SARS‐CoV‐2 virus and H. pylori bacteria with a limit of detection as low as 4 × 102 copies mL−1. The platform used a battery‐powered portable reader for on‐chip one‐pot amplification and fluorescence detection, and can test for multiple (up to four) infectious pathogens simultaneously. This platform can provide an alternative method for fast and reliable on‐site diagnostic testing. [ABSTRACT FROM AUTHOR]

Objectives: Faculty development is essential for academic emergency physicians to maintain clinical skills and succeed in administrative and leadership roles and for career advancement and satisfaction. Faculty developers in emergency medicine (EM) may struggle to find shared resources to guide faculty development efforts in a way that builds on existing knowledge. We aimed to review the EM‐specific faculty development literature since 2000 and come to a consensus about the most useful for EM faculty developers. Methods: A database search was conducted on the topic of faculty development in EM from 2000 to 2020. After identifying relevant articles, we performed a modified Delphi process in three rounds, using a team of educators with a range of experiences with faculty development and education research, to identify articles that would be most useful to a broad audience of faculty developers. Results: We identified 287 potentially relevant articles on the topic of EM faculty development, 244 from the initial literature search, 42 from manual review of the references of the papers meeting inclusion criteria, and one by our study group's recommendation. Thirty‐six papers met final inclusion criteria and underwent full‐text review by our team. The Delphi process yielded six articles that were deemed most highly relevant over the three rounds. Each of these articles is described here, along with summaries and implications for faculty developers. Conclusions: We present the most useful EM papers from the past two decades for faculty developers seeking to develop, implement, or revise faculty development interventions. [ABSTRACT FROM AUTHOR]

During the coronavirus pandemic, changes in the way science is done and shared occurred, which motivates meta‐research to help understand science communication in crises and improve its effectiveness. The objective is to study how many Spanish scientific papers on COVID‐19 published during 2020 share their research data. Qualitative and descriptive study applying nine attributes: (a) availability, (b) accessibility, (c) format, (d) licensing, (e) linkage, (f) funding, (g) editorial policy, (h) content, and (i) statistics. We analyzed 1,340 papers, 1,173 (87.5%) did not have research data. A total of 12.5% share their research data of which 2.1% share their data in repositories, 5% share their data through a simple request, 0.2% do not have permission to share their data, and 5.2% share their data as supplementary material. There is a small percentage that shares their research data; however, it demonstrates the researchers' poor knowledge on how to properly share their research data and their lack of knowledge on what is research data. [ABSTRACT FROM AUTHOR]

Pediatric inflammatory bowel disease (PIBD) is rising rapidly in many industrialized and affluent areas in the Asia‐Pacific region. Current available guidelines, mainly from Europe and North America, may not be completely applicable to clinicians caring for children with PIBD in this region due to differences in disease characteristics and regional resources constraints. This position paper is an initiative from the Asian Pan‐Pacific Society for Pediatric Gastroenterology, Hepatology and Nutrition (APPSPGHAN) with the aim of providing an up‐to‐date, evidence‐based approach to PIBD in the Asia‐Pacific region, taking into consideration the unique disease characteristics and financial resources available in this region. A group of pediatric gastroenterologists with special interest in PIBD performed an extensive literature search covering epidemiology, disease characteristics and natural history, management, and monitoring. Gastrointestinal infections, including tuberculosis, need to be excluded before diagnosing IBD. In some populations in Asia, the Nudix Hydrolase 15 (NUD15) gene is a better predictor of leukopenia induced by azathioprine than thiopurine‐S‐methyltransferase (TPMT). The main considerations in the use of biologics in the Asia‐Pacific region are high cost, ease of access, and potential infectious risk, especially tuberculosis. This position paper provides a useful guide to clinicians in the medical management of children with PIBD in the Asia‐Pacific region. [ABSTRACT FROM AUTHOR]

Disease phenotype of pediatric inflammatory bowel disease (PIBD) in children from the Asia‐Pacific region differs from that of children from the West. Many parts of Asia are endemic for tuberculosis, making diagnosis and management of pediatric Crohn's disease a challenge. Current available guidelines, mainly from Europe and North America, may not be completely applicable to clinicians caring for children with PIBD in Asia due to differences in disease characteristics and regional resource constraints. This position paper is an initiative from the Asian Pan‐Pacific Society for Pediatric Gastroenterology, Hepatology and Nutrition (APPSPGHAN) that aims to provide an up‐to‐date, evidence‐based approach to PIBD in the Asia‐Pacific region. A group of pediatric gastroenterologists with a special interest in PIBD performed an extensive literature search covering epidemiology, disease characteristics and natural history, management, and monitoring. Attention was paid to publications from the region with special consideration to a resource‐limited setting. This current position paper deals with surgical management, disease monitoring, immunization, bone health, and nutritional issues of PIBD in Asia. A special section on differentiating pediatric Crohn's disease from tuberculosis in children is included. This position paper provides a useful guide to clinicians in the surgical management, disease monitoring, and various health issues in children with IBD in Asia‐Pacific region. [ABSTRACT FROM AUTHOR]

Solar-driven photothermal water evaporation is considered an elegant and sustainable technology for freshwater production. The existing systems, however, often suffer from poor stability and biofouling issues, which severely hamper their prospects in practical applications. Conventionally, photothermal materials are deposited on the membrane supports via vacuum-assisted filtration or dip-coating methods. Nevertheless, the weak inherent material-membrane interactions frequently lead to poor durability, and the photothermal material layer can be easily peeled off from the hosting substrates or partially dissolved when immersed in water. In the present article, the discovery of the incorporation of borophene into cellulose nanofibers (CNF), enabling excellent environmental stability with a high light-to-heat conversion efficiency of 91.5% and water evaporation rate of 1.45 kg m-2 h-1 under simulated sunlight is reported. It is also demonstrated that borophene papers can be employed as an excellent active photothermal material for eliminating almost 100% of both gram-positive and gram-negative bacteria within 20 min under three sun irradiations. The result opens a new direction for the design of borophene-based papers with unique photothermal properties which can be used for the effective treatment of a wide range of wastewaters. [ABSTRACT FROM AUTHOR]

Due to migration, terror‐threats and the viral pandemic, various EU member states have re‐established internal border control or even closed their borders. European Association for Biometrics (EAB), a non‐profit organisation, solicited the views of its members on ways which biometric technologies and services may be used to help with re‐establishing open borders within the Schengen area while at the same time mitigating any adverse effects. From the responses received, this position paper was composed to identify ideas to re‐establish free travel between the member states in the Schengen area. The paper covers the contending needs for security, open borders and fundamental rights as well as legal constraints that any technological solution must consider. A range of specific technologies for direct biometric recognition alongside complementary measures are outlined. The interrelated issues of ethical and societal considerations are also highlighted. Provided a holistic approach is adopted, it may be possible to reach a more optimal trade‐off with regards to open borders while maintaining a high‐level of security and protection of fundamental rights. European Association for Biometrics and its members can play an important role in fostering a shared understanding of security and mobility challenges and their solutions. [ABSTRACT FROM AUTHOR]

Healthcare‐associated infections (HAIs) are a global public health threat. Italy is one of the countries with the highest prevalence of HAI. Hand hygiene (HH) is a pillar of infection prevention and control. Monitoring HH is necessary to improve HH compliance, and direct observation is considered the gold standard. Transcription and analysis of data collected during direct observation of HH compliance with the WHO paper form are time‐consuming. We collected, during a 9‐day observation period, HH opportunities and compliance both with a smartphone application (SpeedyAudit) and with the WHO paper form. Then, we investigated the difference in the required time for data transcription and analysis between the WHO paper form and the use of the app. The difference in the required time for data transcription and analysis was significant with a mean time of 2 s using the app and about 14–54 min/day using paper form (p =.004) while no significant difference was found in measured compliance rates between the two data collecting methods. HH monitoring with an app is time‐saving, and the app we used was easy to use. [ABSTRACT FROM AUTHOR]

Paper has always been of great importance as a printing and packaging material. Due to its potential for recyclability and reusability, which result in a low environmental impact, it is expected that this importance will soar over the coming years. Nevertheless, even though paper has been in use for decades, many research questions are still open, especially in the field of mechanics. One of these questions is the appropriate size of a representative volume element (RVE) of the microstructure of paper. Therefore, a finite element network model of interconnected fibers was developed which represents the microstructure of paper. In order to create the network model realistically, geometry and material quantities were taken from experimental investigations. Additionally, single fibers and fiber bonds were investigated beforehand in order to incorporate their proper behavior into the network. Based on this, the networks were generated and subsequently loaded by applying mixed displacement and traction boundary conditions. The resulting effective stresses were compared to determine the necessary RVE size. Two approaches were considered for modeling the RVE: (i) one single "large" network, and (ii) a certain number of smaller networks whose average yielded a statistically representative effective response. As a result, the second approach turned out to be less computationally intensive due to smaller models and the possibility to run calculations simultaneously. Concluding, it was possible to determine the size of the RVE which will be used to investigate various individual microstructural effects on the macrostructure in the future. [ABSTRACT FROM AUTHOR]

Stimuli‐responsive luminescent material‐based rewritable paper has received great attention for its potential application in a wide range of areas from anti‐counterfeiting to information encryption. Herein, a photoluminescence (PL) rewritable paper based on an organic metal halide, trans‐2,5‐dimethylpiperazine manganese(II) bromide (C6N2H16MnBr4) (1), is reported. This 0D organic metal halide hybrid exhibits green emission centered at 548 nm originating from 4T1–6A1 transition of tetrahedrally coordinated Mn2+ ions with a PL quantum efficiency of 82%. Interestingly, complex 1 can be transformed into the non‐emissive hydrated phase C6N2H16MnBr4(H2O)2 (2) by uptake of coordinating water molecules, wherein Mn2+ adopts a quasi‐octahedral coordination sphere. The reversible single‐crystal structure transformation between the hydrated and dehydrated phases can switch the PL on and off. Rewritable PL paper has been fabricated by coating complex 1 on filter paper, which exhibits high resolution and excellent "write‐erase‐write" cycle capability. This work presents a new avenue for low‐dimensional lead‐free organic metal halide hybrids toward multilevel information security applications. [ABSTRACT FROM AUTHOR]

To what extent is the destiny of a scientific paper shaped by the cocitation network in which it is involved? What are the social contexts that can explain these structuring? Using bibliometric data, interviews with researchers, and social network analysis, this article proposes a typology based on egocentric cocitation networks that displays a quadruple structuring (before and after publication): polarization, clusterization, atomization, and attrition. It shows that the academic capital of the authors and the intellectual resources of their research are key factors of these destinies, as are the social relations between the authors concerned. The circumstances of the publishing are also correlated with the structuring of the egocentric cocitation networks, showing how socially embedded they are. Finally, the article discusses the contribution of these original networks to the analyze of scientific production and its dynamics. [ABSTRACT FROM AUTHOR]

Nasal endoscopy is not only used for the diagnosis of chronic rhinosinusitis with nasal polyps (CRSwNP), but also for monitoring the response to therapy playing an important role in both daily practice and research. In contrast to patient‐reported outcomes, endoscopic nasal polyp scoring by independent blinded readers is an objective measurement, not influenced by the placebo effect. It is safer and cheaper compared with computed tomography imaging and therefore, better suited for regular assessments of the extent of the disease. Since the early 90s, a variety of endoscopic staging methods have been proposed and used in clinical research, making it hard to compare results from different studies. This paper resulted from a task force with experts in the field of CRSwNP, originated by the Ear, Nose and Throat section of the European Academy of Allergy and Clinical Immunology and aims to provide a unified endoscopic NP scoring system that can serve as a reference standard for researchers, but also as a useful tool for practitioners involved in the management of CRSwNP. [ABSTRACT FROM AUTHOR]

Idiographic patient‐reported outcome measures (I‐PROMs) are a growing set of individualized tools for use in routine outcome monitoring (ROM) in psychological therapies. This paper presents a position statement on their conceptualization, use, and analysis, based on contemporary evidence and clinical practice. Four problem‐based, and seven goal‐based, I‐PROMs, with some evidence of psychometric evaluation and use in psychotherapy, were identified. I‐PROMs may be particularly valuable to the evaluation of psychological therapies because of their clinical utility and their alignment with a patient‐centered approach. However, there are several challenges for I‐PROMs: how to generate items in a robust manner, their measurement model, methods for establishing their reliability and validity, and the meaning of an aggregated I‐PROM score. Based on the current state of the literature, we recommend that I‐PROMs are used to complement nomothetic measures. Research recommendations are also made regarding the most appropriate methods for analyzing I‐PROM data. [ABSTRACT FROM AUTHOR]

An editorial is presented which discusses the Academy of Nutrition Sciences' second Position Paper on the regulation of nutrition and health claims around the world, with a specific focus on Europe. It discusses the regulations for the European Union and Great Britain and emphasizes the learning's gained through the implementation of the European Food Safety Authority's evidence-based process for assessment of proposed claims.

In this contribution, the causes leading to the undesired unevenness on the exterior surface of a paper‐based sandwich structure during the manufacturing process are investigated. This provides insight into the manufacturing parameters that need to be adjusted to reduce this waviness. A finite element model of the pressing process is developed in the commercial software ABAQUS and then used to analyze the formation of the surface unevenness. The sandwich structure adopted in the model consists of a decorative layer, an intermediate layer, a corrugated core and a bottom layer. In particular, the core has a sinusoidal structure with various geometry parameters, which are adjusted in the model to investigate the effect on the waviness of the top surface. The results of the quasi‐static process simulation correlate well with the experimental results. A subsequent parameter study based on the design of experiments (DoE) shows the relationship between the material parameters of the intermediate/bottom layer and the resulting waviness. [ABSTRACT FROM AUTHOR]

This ENETS guidance paper, developed by a multidisciplinary working group, provides up‐to‐date and practical advice on the diagnosis and management of digestive neuroendocrine carcinoma, based on recent developments and study results. These recommendations aim to pave the road for more standardized care for our patients resulting in improved outcomes. Prognosis is generally poor for digestive NEC, most are advanced at diagnosis and median survival in metastatic disease is 11–12 months. Surgery can be of benefit for localized disease after extensive preoperative imaging. Carboplatin in combination with etoposide is recommended as first‐line treatment for metastatic disease. Irinotecan with fluoropyrimidines has the best evidence as second‐line treatment. Immunotherapy plays a minor role in biomarker‐unselected patients. Molecular profiling if available is encouraged to identify new targets. More prospective clinical trials are highly needed to fulfil the unmet needs in this field, especially on new predictive and prognostic biomarkers and to improve survival of patients with advanced disease. [ABSTRACT FROM AUTHOR]

Nitrogen‐fixing bacteria (NFB) can reduce nitrogen at ambient pressure and temperature. In this study, we treated effluent from a paper mill in sequencing batch reactors (SBRs) and monitored the abundance and activity of NFB with a view to producing a sludge that could work as a biofertilizer. Four reactors were inoculated with activated sludge enriched with NFB and fed with a high C/N waste (100:0.5) from a paper mill. Though the reactors were able to reduce the organic load of the wastewater by up to 89%, they did not have any nitrogen‐fixing activity and showed a decrease in the putative number of NFB (quantified with qPCR). The most abundant species in the reactors treating high C/N paper mill wastewater was identified by Illumina MiSeq 16S rRNA gene amplicon sequencing as Methyloversatilis sp. (relative abundance of 4.4%). Nitrogen fixation was observed when the C/N ratio was increased by adding sucrose. We suspect that real‐world biological nitrogen fixation (BNF) will only occur where there is a C/N ratio ≤100:0.07. Consequently, operators should actively avoid adding or allowing nitrogen in the waste streams if they wish to valorize their sludge and reduce running costs. Practitioner points: Efficient biological wastewater treatment of low nitrogen paper mill effluent was achieved without nutrient supplementation.The sludge was still capable of fixing nitrogen although this process was not observed in the wastewater treatment system.This high C/N wastewater treatment technology could be used with effluents from cassava flour, olive oil, wine and dairy industries. [ABSTRACT FROM AUTHOR]

The article focuses on the importance of quantifying the impact and quality of research articles, discussing traditional metrics such as the Journal Impact Factor (JIF), CiteScore, and the H-index. It also introduces alternative metrics (Altmetrics) like the Altmetric Attention Score (AAS), emphasizing their role in measuring the reach and success of research articles through social media engagement.

THE IMPACT OF SURGICAL MARGINS ON LOCAL RECURRENCE IN BREAST CANCER PATIENTS UNDERGOING NEOAD... J Fan, AJT Lee, DTK Suen, A Kwong Department of Surgery, Queen Mary Hospital, Hong Kong SAR B Aim: b For upfront breast conserving therapy (BCT) in breast cancer, it is well established that "no ink on tumour" equates to a clear margin. All approaches showed promising results of MWA as a curative treatment for malignant liver tumours, its long-term effect and comparison with other treatment modalities should be further studied. Microwave ablation (MWA) can solve these shortcomings by reducing heat-sink effect and achieving larger ablation zones faster. [Extracted from the article]

B Short description b A video demonstrating para-aortic node dissection facilitated by a complete mesocolic excision for a cancer with isolated para-aortic node metastasis. Co-primary end points were stent patency up to 6 months post-stenting and QoL at 3 months (30 days for patients who die before 3 months) measured using the QLQ-C30 global health score. Of these, 245 patients (65%) survived 6 months post-stent insertion and 257 patients (68%) contributed to QoL assessment. [Extracted from the article]

A novel strategy is proposed to enhance the electrochemical performance of polypyrrole (PPy)‐coated cellulose paper (PCP)‐based supercapacitor by increasing the reaction interface between hydrophobic pyrrole and hydrophilic FeCl3 solution. Paper is pretreated with regenerated cellulose (RC) to increase its specific surface area, which lays the foundation for increasing the reaction interface between pyrrole and FeCl3 in the following in situ polymerization while providing more adsorption sites for PPy. The RC‐pretreated paper is first impregnated with pyrrole, followed by removing surplus pyrrole occupied by the internal pores of paper prior to the impregnation of FeCl3 solution, aiming to increase the reaction interface between pyrrole and FeCl3 solution. Consequently, the as‐prepared PCP electrode exhibits a PPy loading of 4.2 mg cm−2, which is twofold higher than unpretreated PCP electrodes (2 mg cm−2). Moreover, a solid‐state supercapacitor assembled with PCP electrodes presents a 58 mF cm−2 areal capacitance at 2 mA cm−2 (equivalent to 140.5 F g−1 at 0.5 A g−1), a 33.1 µWh cm−2 energy density at a power density of 0.60 mW cm−2, and excellent cycling stability with a capacitance retention of 91.6% after 10 000 CV cycles. This work offers a new insight toward improving the electrochemical performance of PCP‐based supercapacitor. [ABSTRACT FROM AUTHOR]

Environmental sustainability is a huge challenge in Africa as the region is currently struggling to provide sustainable systems to support daily human activities. Such activities in many African organisations include paper‐based information storage and communication which are not ecofriendly and place a huge burden on forest resources. This study therefore focused on the implication of overusing paper in an African university. Fifty offices in the university were surveyed and 59 questionnaires administered. The questionnaires were transcribed and analysed using both textual qualitative and quantitative analyses. The results showed that 6888 reams of paper (costing about 8 million Naira) are consumed annually by the university, translating to about 413 trees, which are enough to occupy a standard‐sized football pitch. It was also found that administrative staff members were generally Information Communication Technology (ICT) certified; however, many of them are still not well‐informed on the environmental implication of overconsuming paper even though they are largely aware of the benefits of paperless systems. Recommendations were offered on how to reduce the demand for paper by the university. This study is expected to create more awareness on the urgent need for African organisations to take environmental sustainability issues more seriously. [ABSTRACT FROM AUTHOR]

The International Journal of Gynecology & Obstetrics has published 12 papers from the XXIV FIGO World Congress, which took place in Paris in October 2023. These papers were selected as outstanding abstracts by FIGO's Scientific Programme Committee and cover a range of topics and regions, including Europe, Latin America, Asia-Oceania, Africa-East Mediterranean, and North America. The journal is offering free access to these papers for a limited time. The 25th FIGO World Congress will be held in Cape Town, South Africa in October 2025, and researchers are encouraged to submit their abstracts for consideration. The journal aims to make the best research available to a global audience and has a wide readership. [Extracted from the article]

The Society for the Study of Species Biology has announced the recipient of the 17th Plant Species Biology Best Paper Award. The winning paper, titled "Environmental and genetic effects on phenotypic differences between Elaeocarpus photiniifolia ecotypes in dry and mesic habitats on a Japanese oceanic island," explores how different environmental conditions have led to reproductive isolation and genetic differentiation in a specific plant species. Another paper, titled "The epiphytic orchid Vanda falcata is predominantly associated with a single Tulasnellaceae fungus in adulthood, and Ceratobasidiaceae fungi strongly induce its seed germination in vitro," investigates the symbiotic relationships between orchids and mycorrhizal fungi at different stages of growth. Both papers are featured in recent issues of Plant Species Biology. [Extracted from the article]

In this concept, we showcase the upsurge in the studies of dynamic ultralong room‐temperature phosphorescence (RTP) materials containing inorganic and/or organic components as versatile photo‐responsive platforms. The goal is to provide a comprehensive analysis of photo‐controllable RTP, and meanwhile delve into the underlying RTP properties of various classes of photochromic materials including metal‐organic complexes, organic‐inorganic co‐crystals, purely organic small molecules and organic polymers. In particular, the design principles governing the integration of the photochromic and RTP moieties within a single material system, and the tuning of dynamic RTP in response to light are emphasized. As such, this concept sheds light on the challenges and opportunities of using these tunable RTP materials for potential applications in optoelectronics, particularly highlighting their use of reversible information encryption, erasable light printing and rewritable smart paper. [ABSTRACT FROM AUTHOR]

TiO2 nanoparticles can improve the electrical performance of oil paper insulation. In this study, 10 nm TiO2 nanoparticles were prepared and dispersed into transformer oil, and then immerse pressboards in it to obtain nanofluid impregnated pressboards (NP). Its thermal aging was accelerated together with the reference sample at 130°C for 36 days. Analyzing the acid value in the oil, polymerization degree, surface topography, AC breakdown strength, surface flashover characteristics and surface potential decay characteristics. It was observed that TiO2 nanoparticles can reduce the acid value and improve AC breakdown strength of oil. However, the degree of polymerization and surface appearance of NP and oil impregnated pressboards (OP) during thermal aging did not differ significantly. During the aging process, the energy level of pressboard surface traps shifted first towards the shallow and then gradually towards the deep. During all the aging stages, the surface flashover voltage of NP was always higher or close to that of OP. The mechanism of TiO2 nanoparticles improving the breakdown and surface flashover characteristics of oil–paper insulation during thermal aging is discussed from the perspective of water molecules and aging by‐products adsorption and introduction of shallow traps by nanoparticles. [ABSTRACT FROM AUTHOR]

The de‐acidification method has always been a hotspot in the research of paper‐based cultural relics conservation science. The existing de‐acidification methods are either not thorough enough or not easy to operate, requiring innovation and breakthrough. Moreover, the strength of the paper cannot be significantly improved by the simple de‐acidification treatment. To achieve the reinforcement of paper, another intervention process is often required, and each intervention may cause damage to the fragile paper cultural relics. This study introduces electrosorption deionization technology to the conservation treatment of paper cultural relics. Based on the electrosorption technology, an integrated treatment of paper de‐acidification and reinforcement was applied to sample papers using a composite electrolyte of de‐acidification and reinforcement materials and a self‐made electrosorption device. The experimental results show that both the de‐acidification and reinforcement effects on the paper samples obtained a significant promotion. [ABSTRACT FROM AUTHOR]

Among plastic items, single‐use straws are particularly detrimental to marine ecosystems because such straws, including those made of poly(lactic acid) (PLA), are sharp and extremely slowly degradable in the ocean. While paper straws are promising alternatives, they exhibit hydration‐induced swelling even when coated with a non‐degradable plastic coating and promote effervescence (fizzing) in soft drinks owing to their surface heterogeneities. In this study, upgraded paper straw is coated with poly(butylene succinate) cellulose nanocrystal (PBS/CNC) composites. CNC increases adhesion to paper owing to their similar chemical structures, optimizes crystalline PBS spherulites through effective nucleation, and reinforces the matrix through its anisotropic and rigid features. The straws are not only anti‐fizzing when used with soft drinks owing to their homogeneous and seamless surface coatings, but also highly water‐resistant and tough owing to their watertight surfaces. All degradable components effectively decompose under aerobic composting and in the marine environment. This technology contributes to United Nations Sustainable Development Goal 14 (Life Below Water). [ABSTRACT FROM AUTHOR]

The present study describes the phytoremediation performance of water lettuce (Pistia stratiotes L.) for physicochemical pollutants elimination from paper mill effluent (PME). For this, pot (glass aquarium) experiments were conducted using 0% (BWW: borewell water), 25%, 50%, 75%, and 100% treatments of PME under natural day/light regime. Results of the experiments showed that the highest removal of pH (10.75%), electrical conductivity (EC: 63.82%), total dissolved solids (TDS: 71.20%) biological oxygen demand (BOD: 85.03%), chemical oxygen demand (COD: 80.46%), total Kjeldahl's nitrogen (TKN: 93.03%), phosphorus (P: 85.56%), sodium (Na: 91.89%), potassium (K: 84.04%), calcium (Ca: 84.75%), and magnesium (Mg: 83.62%), most probable number (MPN: 77.63%), and standard plate count (SPC: 74.43%) was noted in 75% treatment of PME after treatment by P. stratiotes. PCA showed the best vector length for TKN, Na, and Ca. The maximum plant growth parameters including, total fresh biomass (81.30 ± 0.28 g), chlorophyll content (3.67 ± 0.05 mg g−1 f.wt), and relative growth rate (0.0051 gg−1 d−1) was also measured in 75% PME treatment after phytoremediation experiments. The findings of this study make useful insight into the biological management of PME through plant‐based pollutant eradication while leftover biomass may be used as a feedstock for low‐cost bioenergy production. Practitioner points: Biological treatment of paper mill effluent using water lettuce is presented.Best reduction of physicochemical and microbiological pollutants was attained in 75% treatment.Maximum production of chlorophyll, plant biomass, and highest growth rate was also observed in 75% treatment. [ABSTRACT FROM AUTHOR]

Background: New methods are constantly being developed to adapt cognitive load measurement to different contexts. However, research on middle childhood students' cognitive load measurement is rare. Research indicates that the three cognitive load dimensions (intrinsic, extraneous, and germane) can be measured well in adults and teenagers using differentiated subjective rating instruments. Moreover, digital ink recorded by smartpens could serve as an indicator for cognitive load in adults. Aims: With the present research, we aimed at investigating the relation between subjective cognitive load ratings, velocity and pressure measures recorded with a smartpen, and performance in standardized sketching tasks in middle childhood students. Sample: Thirty‐six children (age 7–12) participated at the university's laboratory. Methods: The children performed two standardized sketching tasks, each in two versions. The induced intrinsic cognitive load or the extraneous cognitive load was varied between the versions. Digital ink was recorded while the children drew with a smartpen on real paper and after each task, they were asked to report their perceived intrinsic and extraneous cognitive load using a newly developed 5‐item scale. Results: Results indicated that cognitive load ratings as well as velocity and pressure measures were substantially related to the induced cognitive load and to performance in both sketching tasks. However, cognitive load ratings and smartpen measures were not substantially related. Conclusions: Both subjective rating and digital ink hold potential for cognitive load and performance measurement. However, it is questionable whether they measure the exact same constructs. [ABSTRACT FROM AUTHOR]

This document provides highlights of recent clinically relevant papers in the field of equine veterinary education. The first study investigates the associations between turn-out practices and rates of musculoskeletal disease and injury in young Thoroughbreds on stud farms. The second study examines the effects of road transport on horses, specifically looking at changes in white blood cell count and inflammatory reactions. The third study compares plasma adrenocorticotropic hormone concentrations among different breeds of mature horses and ponies. The fourth study describes and compares clinicopathologic findings of diarrheic horses between different geographic regions and identifies factors associated with nonsurvival and laminitis. The final study explores the potential effects of pet ownership and exercise on the mental health of veterinary professionals. [Extracted from the article]

This document provides highlights of recent clinically relevant papers in the field of equine veterinary education. The first study compares different imaging techniques for diagnosing palmar/plantar osteochondral disease (POD) lesions in horses. The second study investigates the incidence of disease, injury, and death in Thoroughbred foals and yearlings on stud farms. The third study describes the diagnostic approaches and outcomes for acute diarrhea in horses. The fourth study examines the proportion of horse owners who would consent to exploratory laparotomy and identifies motivators and barriers for consent. The final study explores the use of the horse grimace scale (HGS) to identify pain behaviors in horses with and without equine gastric ulcer syndrome (EGUS). [Extracted from the article]

"A Liberal Chronicle in Peace and War: Journals and Papers of J. A. Pease, 1st Lord Gainford, 1911–1915" is a highly regarded historical book that provides the complete text of Joseph "Jack" Pease's cabinet diaries and selected letters from 1911 to 1915. Pease was a member of the last reforming Liberal government led by H. H. Asquith, and his diary offers fascinating insights into the political, family, and social circles of the time. The book also includes commentaries by the editors, Cameron Hazlehurst and Christine Woodland, who provide additional context and interpretations. This meticulously researched and well-written book is a valuable resource for scholars studying the political history of the United Kingdom during this period. [Extracted from the article]

This article discusses OpenAI's ChatGPT, a generative pre‐trained transformer, which uses natural language processing to fulfill text‐based user requests (i.e., a "chatbot"). The history and principles behind ChatGPT and similar models are discussed. This technology is then discussed in relation to its potential impact on academia and scholarly research and publishing. ChatGPT is seen as a potential model for the automated preparation of essays and other types of scholarly manuscripts. Potential ethical issues that could arise with the emergence of large language models like GPT‐3, the underlying technology behind ChatGPT, and its usage by academics and researchers, are discussed and situated within the context of broader advancements in artificial intelligence, machine learning, and natural language processing for research and scholarly publishing. [ABSTRACT FROM AUTHOR]

Different on‐chip antennas in Complementary Metal‐Oxide‐Semiconductor (CMOS) technology for THz detector and source are proposed. Firstly, the size of these antennas is estimated with an equivalent CMOS substrate model. Finally, through electromagnetic simulation, the structure optimised and slotted the on‐chip antenna to realise multi‐band detection, miniaturised detection, and miniaturised source. For the THz detector, multi‐band antennas with a dual‐ring structure and miniaturised antennas with circular and diamond structures are designed. At the frequency of 300, 600, and 800 GHz, the gain of the ring antennas is 5.7, 7.2, and 7.2 dBi, respectively. The gain of the circular and diamond antenna is 5.3 and 5.96 dBi at 300 GHz. For the THz source, rectangular‐slot and T‐slot antennas are designed at the frequency of 300 GHz and the gain of the rectangular‐slot and T‐slot antennas is 2.92 and 3.87 dBi, respectively. Multi‐band antennas and miniaturised antennas effectively save the occupation area and improve the performance of the THz system. The effectiveness of antennas is verified by the measurement of the detector and the source, which indicates that the proposed on‐chip antennas have potential prospects for CMOS THz applications. [ABSTRACT FROM AUTHOR]

The remaining 11 patients still utilizing PES in 2020 had on average seven chronic medical conditions (95% CI: 3.8-10.2), with six patients having at least one alcohol-attributable condition, and were taking on average 11 chronic medications (95% CI: 8.5-13.5). Among all 12 patients still alive and within the state of Connecticut in 2020, all but one patient who required nursing home care continued to utilize PES services, and the majority of patients with substance use disorder continued to report substance use in 2020. Prevalence of Substance Use Disorder in Hospitalized Pediatric Patients With Eating Disorders... B Precious Obehi Eseaton SP 1 sp , Samuel Nwaobi SP 2 sp , Henry Onyeaka SP 3 sp , Abby Enosolease SP 4 sp , Adeolu Funso Oladunjoye SP 5 sp , Ehizogie Edigin SP 6 sp , Adeolu Oladunjoye* SP 5 sp b SP 1 sp University of South Wales, SP 2 sp Piedmont Columbus Regional, SP 3 sp Harvard Medical School, SP 4 sp University of Benin, SP 5 sp Baylor College of Medicine, SP 6 sp Loma Linda University Health B Summary b : We aim to study the prevalence of substance use disorder in hospitalized pediatric patients with eating disorders in the United States. Alcohol use was most frequently reported (16 patients), followed by stimulant use (nine patients), opioid use (seven patients), and then other substances such as sedative-hypnotics and cannabis (four patients). Only a minority of the patients had only METH as a presenting disorder with the most patients also manifesting opioid use disorders. [Extracted from the article]

Remotely controlled self‐propelled optically‐driven actuators are increasingly attractive for sensing and robotic applications. However, complexities in material synthesis, multifunctionality, dynamic response, and the response rate limit their use for wide‐ranging application. This work uses a simple and efficient spraying method to prepare optically‐driven actuators based on TiN@PDMS‐PVDF (TiN@polydimethylsiloxane‐polyvinylidene difluoride) papers. The actuator exhibits stable superhydrophobicity for photothermal heating and corrosive solutions with a contact angle and sliding angle of 169.9° and 2.3°, respectively. The superhydrophobic actuators exhibit an efficient photothermal conversion aided by a very high optical absorption of the material approaching 97%. The optically‐driven actuator based on the TiN@PDMS‐PVDF paper exhibit a fast response and movement on the water surface. A 1.5 W cm−2 laser‐driven actuator yields a response time of 0.84 s, with its linear velocity approaching 10.1 mm s−1. The multifunctional optical‐driven actuators can easily perform operations such as linear and rotational motion optically engineered to avoid obstacles, transport cargo, and clean oil over a water surface. These fast, multifunctional, superhydrophobic actuators have bright prospects in many fields, such as bioengineering, environmental protection, and micro‐robots. [ABSTRACT FROM AUTHOR]

Summary: In a paper recently published in this journal, Shlomit Bechar (2021) analyzed the appearance and use of basalt orthostats in Canaanite and Israelite Hazor. The present paper is an addendum to Bechar's paper, elaborating the subject of the basalt lion orthostats found at Hazor. These lion orthostats formed an inseparable component of the 'orthostats architecture' characteristic of several monumental buildings in the Canaanite city. The paper discusses their original position, date, style, function, and fate following the destruction of the city. [ABSTRACT FROM AUTHOR]

Despite the ever‐increasing demand for transparent power sources in wireless optoelectronics, most of them have still relied on synthetic chemicals, thus limiting their versatile applications. Here, a class of transparent nanocellulose paper microsupercapacitors (TNP‐MSCs) as a beyond‐synthetic‐material strategy is demonstrated. Onto semi‐interpenetrating polymer network‐structured, thiol‐modified transparent nanocellulose paper, a thin layer of silver nanowire and a conducting polymer (chosen as a pseudocapacitive electrode material) are consecutively introduced through microscale‐patterned masks (which are fabricated by electrohydrodynamic jet printing) to produce a transparent conductive electrode (TNP‐TCE) with planar interdigitated structure. This TNP‐TCE, in combination with solid‐state gel electrolytes, enables on‐demand (in‐series/in‐parallel) cell configurations in a single body of TNP‐MSC. Driven by this structural uniqueness and scalable microfabrication, the TNP‐MSC exhibits improvements in optical transparency (T = 85%), areal capacitance (0.24 mF cm−2), controllable voltage (7.2 V per cell), and mechanical flexibility (origami airplane), which exceed those of previously reported transparent MSCs based on synthetic chemicals. [ABSTRACT FROM AUTHOR]

Developmental pharmacology describes the impact of maturation on drug disposition (pharmacokinetics, PK) and drug effects (pharmacodynamics, PD) throughout the paediatric age range. This paper, written by a multidisciplinary group of experts, summarizes current knowledge, and provides suggestions to pharmaceutical companies, regulatory agencies and academicians on how to incorporate the latest knowledge regarding developmental pharmacology and innovative techniques into neonatal and paediatric drug development. Biological aspects of drug absorption, distribution, metabolism and excretion throughout development are summarized. Although this area made enormous progress during the last two decades, remaining knowledge gaps were identified. Minimal risk and burden designs allow for optimally informative but minimally invasive PK sampling, while concomitant profiling of drug metabolites may provide additional insight in the unique PK behaviour in children. Furthermore, developmental PD needs to be considered during drug development, which is illustrated by disease‐ and/or target organ‐specific examples. Identifying and testing PD targets and effects in special populations, and application of age‐ and/or population‐specific assessment tools are discussed. Drug development plans also need to incorporate innovative techniques such as preclinical models to study therapeutic strategies, and shift from sequential enrolment of subgroups, to more rational designs. To stimulate appropriate research plans, illustrations of specific PK/PD‐related as well as drug safety‐related challenges during drug development are provided. The suggestions made in this joint paper of the Innovative Medicines Initiative conect4children Expert group on Developmental Pharmacology and the European Society for Developmental, Perinatal and Paediatric Pharmacology, should facilitate all those involved in drug development. [ABSTRACT FROM AUTHOR]

Responsive photonic crystals are widely employed to construct rewritable paper, where patterns are written and erased repeatedly via color switching. The working principle mainly lies in the changes on the lattice constant of periodic structures, which, however, restricts the localized color tuning of the recorded patterns and thus limits multicolor information transfer. Herein, a novel strategy is reported to write, erase, and importantly to tune the colors by developing unique light‐driven cholesteric liquid crystals (CLCs) that possess self‐organized helical superstructures with two structural elements of pitch lengths (lattice constant) and helical axes (reconfiguration). Reconfiguration of the helical axes provides two high‐contrast optical states for writing and erasing by pressure and electricity, whereas precise photocontrol of the pitch lengths contributes to localized color tuning. These features primarily capitalize on the light‐driven CLC with diverse photostationary colors, which is induced by a newly designed binary chiral system and confined in the polymer dispersed liquid crystal layer. Distinct multicolor patterns are mechanically written, optically tuned, and electrically erased on the rewritable photonic paper in a programmable manner. Such photonic paper has potential to record, program, and remember optically addressed images in visualized color information and user‐interactive display technologies. [ABSTRACT FROM AUTHOR]

B I Richard L.D. Morse Applied Consumer Economics Award, National Endowment for Financial Education (NEFE) Paper Award i b I Enhancing trust in the Social Security Administration i Author(s): Cliff Robb, Professor, University of Wisconsin-Madison; Marti Deliema, Assistant Professor and Gerontologist, University of Minnesota-Twin Cities; Steve Wendel, Applied Behavioral Scientist One of the insidious effects of government imposter scams is the potential erosion of trust among those who are targeted. This study analyzes how individuals targeted by government imposter scams respond to communications from the SSA and how the SSA can reinforce public trust and willingness to engage. According to a Gallup survey conducted in August 2022, about a quarter of lower-income households (annual income below $48,000) reported severe financial hardship. [Extracted from the article]