Search

Laboratory acoustic emissions (AEs) serve as small-scale analogues to earthquakes, offering fundamental insights into seismic processes. To ensure accurate physical interpretations of AEs, rigorous calibration of the acoustic system is essential. In this paper, we present an empirical calibration technique that quantifies sensor response, instrumentation effects, and path characteristics into a single entity termed instrument apparatus response. Using a controlled seismic source with different steel balls, we retrieve the instrument apparatus response in the frequency domain under typical experimental conditions for various piezoelectric sensors (PZTs) arranged to simulate a three-component seismic station. Removing these responses from the raw AE spectra allows us to obtain calibrated AE source spectra, which are then effectively used to constrain the seismic AE source parameters. We apply this calibration method to acoustic emissions (AEs) generated during unstable stick-slip behavior of a quartz gouge in double direct shear experiments. The calibrated AEs range in magnitude from −7.1 to −6.4 and exhibit stress drops between 0.075 MPa and 4.29 MPa, consistent with earthquake scaling relation. This result highlights the strong similarities between AEs generated from frictional gouge experiments and natural earthquakes. Through this acoustic emission calibration, we gain physical insights into the seismic sources of laboratory AEs, enhancing our understanding of seismic rupture processes in fault gouge experiments. [ABSTRACT FROM AUTHOR]

Accurately estimating single-axis rotational angle changes is crucial in many high-tech domains. However, traditional angle measurement techniques are often constrained by sensor limitations and environmental interferences, resulting in significant deficiencies in precision and stability. Moreover, current methodologies typically rely on fixed-axis rotation models, leading to substantial discrepancies between measured and actual angles due to axis misalignment. To address these issues, this paper proposes an innovative method for single-axis rotational angle estimation. It introduces a calibration technique for installation errors between inertial measurement units and the overall measurement system, effectively translating dynamic rotational inertial outputs to system enclosure outputs. Subsequently, the method employs triaxial accelerometers combined with zero-velocity detection technology to estimate the rotation axis position. Finally, it delves into analyzing the relationship between quaternion and axis–angle, aimed at reducing noise interference for precise rotational angle estimation. Based on this proposed methodology, a Low-Cost, a High Accuracy Measurement System (HAMS) integrating sensor fusion was designed and implemented. Experimental results demonstrate static measurement errors below ±0.15° and dynamic measurement errors below ±0.5° within a ±180° range. [ABSTRACT FROM AUTHOR]

While interest in using wearable sensors to measure infant leg movement is increasing, attention should be paid to the characteristics of the sensors. Specifically, offset error in the measurement of gravitational acceleration (g) is common among commercially available sensors. In this brief report, we demonstrate how we measured the offset and other errors in three different off-the-shelf wearable sensors available to professionals and how they affected a threshold-based movement detection algorithm for the quantification of infant leg movement. We describe how to calibrate and correct for these offsets and how conducting this improves the reproducibility of results across sensors. [ABSTRACT FROM AUTHOR]

In this paper, we present a noise-robust approach for the 3D pose estimation of multiple people using appearance similarity. The common methods identify the cross-view correspondences between the detected keypoints and determine their association with a specific person by measuring the distances between the epipolar lines and the joint locations of the 2D keypoints across all the views. Although existing methods achieve remarkable accuracy, they are still sensitive to camera calibration, making them unsuitable for noisy environments where any of the cameras slightly change angle or position. To address these limitations and fix camera calibration error in real-time, we propose a framework for 3D pose estimation which uses appearance similarity. In the proposed framework, we detect the 2D keypoints and extract the appearance feature and transfer it to the central server. The central server uses geometrical affinity and appearance similarity to match the detected 2D human poses to each person. Then, it compares these two groups to identify calibration errors. If a camera with the wrong calibration is identified, the central server fixes the calibration error, ensuring accuracy in the 3D reconstruction of skeletons. In the experimental environment, we verified that the proposed algorithm is robust against false geometrical errors. It achieves around 11.5% and 8% improvement in the accuracy of 3D pose estimation on the Campus and Shelf datasets, respectively. [ABSTRACT FROM AUTHOR]

Potential transformers are vital for measuring and protecting the power grid. Their accuracy and reliability directly impact the stability and security of the power system. To address the issues with traditional high-precision potential transformer calibrators, such as cumbersome operation and low efficiency, a high-precision potential transformer calibrator has been developed. The calibrator is based on an embedded system architecture of FPGA and ARM. It uses a high-precision current comparator along with feedback control technology. By monitoring and adjusting the error feedback voltage, it can perform the automated calibration of potential transformers with an accuracy class of 0.0001. The measurement ranges from 0.00001% to 200.0%. This study can be adapted to meet the development needs of modern digital measurement systems. [ABSTRACT FROM AUTHOR]

Due to the continuous degradation of onboard satellite instruments over time, satellite images undergo degradation, necessitating calibration for tasks reliant on satellite data. The previous relative radiometric calibration methods are mainly categorized into traditional methods and deep learning methods. The traditional methods involve complex computations for each calibration, while deep-learning-based approaches tend to oversimplify the calibration process, utilizing generic computer vision models without tailored structures for calibration tasks. In this paper, we address the unique challenges of calibration by introducing a novel approach: a multi-task convolutional neural network calibration model leveraging temporal information. This pioneering method is the first to integrate temporal dynamics into the architecture of neural network calibration models. Extensive experiments conducted on the FY3A/B/C VIRR datasets showcase the superior performance of our approach compared to the existing state-of-the-art traditional and deep learning methods. Furthermore, tests with various backbones confirm the broad applicability of our framework across different convolutional neural networks. [ABSTRACT FROM AUTHOR]

Energy models require accurate calibration to deliver reliable predictions. This study offers statistical guidance for a systematic treatment of uncertainty before and during model calibration. Statistical emulation and history matching are introduced. An energy model of a domestic property and a full year of observed data are used as a case study. Emulators, Bayesian surrogates of the energy model, are employed to provide statistical approximations of the energy model outputs and explore the input parameter space efficiently. The emulator's predictions, alongside quantified uncertainties, are then used to rule out parameter configurations that cannot lead to a match with the observed data. The process is automated within an iterative procedure known as history matching (HM), in which simulated gas consumption and temperature data are simultaneously matched with observed values. The results show that only a small percentage of parameter configurations (0.3% when only gas consumption is matched, and 0.01% when both gas and temperature are matched) yielded outputs matching the observed data. This demonstrates HM's effectiveness in pinpointing the precise region where model outputs align with observations. The proposed method is intended to offer analysts a robust solution to rapidly explore a model's response across the entire input space, rule out regions where a match with observed data cannot be achieved, and account for uncertainty, enhancing the confidence in energy models and their viability as a decision support tool. [ABSTRACT FROM AUTHOR]

A low-cost, tri-axial 50 Hz magnetic field monitoring sensor was designed, calibrated and verified. The sensor was designed using off-the-shelf components and commercially available coils. It can measure 50 Hz magnetic fields originating from high-voltage power lines from 0.08 µT to 364 µT, divided into two measurement ranges. The sensor was calibrated both on-board and in-lab. The on-board calibration takes the circuit attenuation, noise and parasitic components into account. In the in-lab calibration, the output of the developed sensor is compared to the benchmark, a narrowband EHP-50. The sensor was then verified in situ under high-voltage power lines at two independent measurement locations. The measured field values during this validation were between 0.10 µT and 13.43 µT, which is in agreement with other reported measurement values under high-voltage power lines in literature. The results were compared to the benchmark, for which average deviations of 6.2% and 1.4% were found, at the two independent measurement locations. Furthermore, fields up to 113.3 µT were measured in a power distribution sub-station to ensure that both measurement ranges were verified. Our network, four active sensors in the field, had high uptimes of 96%, 82%, 81% and, 95% during a minimum 3-month interval. In total, over 6 million samples were gathered with field values that ranged from 0.08 µT to 45.48 µT. This suggests that the proposed solution can be used for this monitoring, although more extensive long-term testing with more sensors is required to confirm the uptime under multiple circumstances. [ABSTRACT FROM AUTHOR]

With the advancement of computer vision and sensor technologies, many multi-camera systems are being developed for the control, planning, and other functionalities of unmanned systems or robots. The calibration of multi-camera systems determines the accuracy of their operation. However, calibration of multi-camera systems without overlapping parts is inaccurate. Furthermore, the potential of feature matching points and their spatial extent in calculating the extrinsic parameters of multi-camera systems has not yet been fully realized. To this end, we propose a multi-camera calibration algorithm to solve the problem of the high-precision calibration of multi-camera systems without overlapping parts. The calibration of multi-camera systems is simplified to the problem of solving the transformation relationship of extrinsic parameters using a map constructed by multiple cameras. Firstly, the calibration environment map is constructed by running the SLAM algorithm separately for each camera in the multi-camera system in closed-loop motion. Secondly, uniformly distributed matching points are selected among the similar feature points between the maps. Then, these matching points are used to solve the transformation relationship between the multi-camera external parameters. Finally, the reprojection error is minimized to optimize the extrinsic parameter transformation relationship. We conduct comprehensive experiments in multiple scenarios and provide results of the extrinsic parameters for multiple cameras. The results demonstrate that the proposed method accurately calibrates the extrinsic parameters for multiple cameras, even under conditions where the main camera and auxiliary cameras rotate 180°. [ABSTRACT FROM AUTHOR]

Autonomous vehicles (AVs) rely heavily on sensors to perceive their surrounding environment and then make decisions and act on them. However, these sensors have weaknesses, and are prone to failure, resulting in decision errors by vehicle controllers that pose significant challenges to their safe operation. To mitigate sensor failures, it is necessary to understand how they occur and how they affect the vehicle's behavior so that fault-tolerant and fault-masking strategies can be applied. This survey covers 108 publications and presents an overview of the sensors used in AVs today, categorizes the sensor's failures that can occur, such as radar interferences, ambiguities detection, or camera image failures, and provides an overview of mitigation strategies such as sensor fusion, redundancy, and sensor calibration. It also provides insights into research areas critical to improving safety in the autonomous vehicle industry, so that new or more in-depth research may emerge. [ABSTRACT FROM AUTHOR]

Pseudorange bias refers to the receiver-dependent and satellite-dependent constant bias in the pseudorange resulting from the nonideal characteristics of a signal. The impact of pseudorange bias on high-precision satellite navigation services has long been ignored. This paper proposes a pseudorange bias calibration method for two collocated receivers. Then, we calibrate pseudorange biases for two types of collocated receivers at a monitoring station within China and evaluate their impact on two high-precision services: BeiDou Navigation Satellite System 3 (BDS-3) dual-frequency pseudorange augmentation and precise point precision (PPP). Theoretical analysis reveals that the calibrated pseudorange biases contribute 17.2% and 7.7% to the user equivalent ranging error (UERE) of BDS-3 and Global Positioning System (GPS) dual-frequency pseudorange augmentation, respectively, and that the convergence time of the GPS static and kinematic PPP increases from 6 min and 26 min to 19 min and 58 min, respectively. The experimental results indicate that the calibrated pseudorange biases are consistent as the receiver location and time vary. The spatial distribution consistency is generally better than 0.1 m, and the temporal consistency is better than 0.15 m. The pseudorange biases for BDS-3 B1C and B2a are approximately 0.7 m and 0.1 m, respectively, whereas those for GPS L1C/A and L2P are both approximately 0.25 m. Furthermore, The results show that after correction of the pseudorange biases, the average convergence time for BDS-3/GPS static PPP decreases from 48.83/24.03 min to 38.54/21.12 min, respectively, a decrease of approximately 21%/12%. For BDS-3/GPS/BDS-3 + GPS kinematic PPP, the average convergence time decreases from 109.53/45.10/39.15 min to 62.99/40.83/22.94 min, respectively, a decrease of approximately 42%/41%/9%. Similarly, the three-dimensional positioning accuracy for BDS-3/GPS/BDS-3 + GPS dual-frequency pseudorange augmentation improves from 3.25/3.94/2.49 m to 2.65/3.69/2.16 m, respectively, increasing by approximately 6.3%, 18.5%, and 13.3%, respectively. The above analysis and experiments demonstrate that pseudorange bias is an important error source affecting both dual-frequency pseudorange augmentation and PPP services. [ABSTRACT FROM AUTHOR]

Bistatic and multistatic SAR technology, with its multi-dimensional, ultra-wide swath, and high-resolution advantages, is widely used in earth observation, military reconnaissance, deep space exploration, and other fields. The LuTan-1 (LT-1) mission employs two full-polarimetric L-band SAR satellites for the BiSAR system. The bistatic mode introduces phase errors in echo reception paths due to different transmission links, making echo compensation a key factor in ensuring BiSAR performance. This paper proposes a novel bistatic internal calibration strategy that combines ground temperature compensation, in-orbit internal calibration, and pulsed alternate synchronization to achieve echo compensation. Prior to launch, temperature compensation data for the internal calibration system are obtained via temperature experiments. During in-orbit operation, calibration data are acquired by executing the internal calibration pulse sequence and noninterrupted pulsed alternate synchronization. In ground processing, echo compensation is completed based on the above two parts of calibration data. A comprehensive analysis of the entire calibration chain reveals a temperature compensation accuracy of 0.10 dB/1.38°. Additionally, a ground verification system is established to conduct BiSAR experiments, achieving a phase synchronization accuracy of 0.16°. Furthermore, the in-orbit test obtained DSM products with an average error of 1.3 m. This strategy provides a valuable reference for future spaceborne bistatic and multistatic SAR systems. [ABSTRACT FROM AUTHOR]

The rapid development of active safety systems in the automotive industry and research in autonomous driving requires reliable, high-precision sensors that provide rich information about the surrounding environment and the behaviour of other road users. In practice, there is always some non-zero mounting misalignment, i.e., angular inaccuracy in a sensor's mounting on a vehicle. It is essential to accurately estimate and compensate for this misalignment further programmatically (in software). In the case of radars, imprecise mounting may result in incorrect/inaccurate target information, problems with the tracking algorithm, or a decrease in the power reflected from the target. Sensor misalignment should be mitigated in two ways: through the correction of an inaccurate alignment angle via the estimated value of the misalignment angle or alerting other components of the system of potential sensor degradation if the misalignment is beyond the operational range. This work analyses misalignment's influences on radar sensors and other system components. In the mathematically proven example of a vertically misaligned radar, pedestrian detectability dropped to one-third of the maximum range. In addition, mathematically derived heading estimation errors demonstrate the impact on data association in data fusion. The simulation results presented show that the angle of misalignment exponentially increases the risk of false track splitting. Additionally, the paper presents a comprehensive review of radar alignment techniques, mostly found in the patent literature, and implements a baseline algorithm, along with suggested key performance indicators (KPIs) to facilitate comparisons for other researchers. [ABSTRACT FROM AUTHOR]

Traditionally, for indoor radon testing, predominantly passive measurements have been used, typically applying the solid-state alpha track-etch method for long-term and the charcoal method for short-term measurements. However, increasingly, affordable consumer-grade active monitors have become available in the last few years, which can generate a concentration time series of an almost arbitrary duration. Firstly, we argue that consumer-grade monitors can well be used for quality-assured indoor radon assessment and consequent reliable decisions. Secondly, we discuss the requirements of quality assurance, which actually allow for reliable decision-making. In particular, as part of a rational strategy, we discuss how to interpret measurement results from low-cost active monitors with high and low sensitivity with respect to deciding on conformity with reference levels that are the annual average concentration of indoor radon. Rigorous analysis shows that temporal variations in radon are a major component of the uncertainty in decision-making, the reliability of which is practically independent of monitor sensitivity. Manufacturers of low-cost radon monitors already provide sufficient reliability and quality of calibration for their devices, which can be used by both professional inspectors and the general public. Therefore, within the suggested measurement strategy and metrologically assured criteria, we only propose to clarify the set and values of the key metrological characteristics of radon monitors as well as to upgrade user-friendly online tools. By implementing clear metrological requirements as well as the rational measurement strategy for the reliable conformity assessment of a room (building) with radon safety requirements, we anticipate significant reductions in testing costs, increased accessibility, and enhanced quality assurance and control (QA/QC) in indoor radon measurements. [ABSTRACT FROM AUTHOR]

The National Oceanic and Atmospheric Administration (NOAA) 21 Visible Infrared Imaging Radiometer Suite (VIIRS) was successfully launched on 10 November 2022. To ensure the required instrument performance, a series of Post-Launch Tests (PLTs) were performed and analyzed. The primary calibration source for NOAA-21 VIIRS Reflective Solar Bands (RSBs) is the Solar Diffuser (SD), which retains the prelaunch radiometric calibration standard from prelaunch to on-orbit. Upon reaching orbit, the SD undergoes degradation as a result of ultraviolet solar illumination. The rate of SD degradation (called the H-factor) is monitored by a Solar Diffuser Stability Monitor (SDSM). The initial H-factor's instability was significantly improved by deriving a new sun transmittance function from the yaw maneuver and one-year SDSM data. The F-factors (normally represent the inverse of instrument gain) thus calculated for the Visible/Near-Infrared (VISNIR) bands were proven to be stable throughout the first year of the on-orbit operations. On the other hand, the Shortwave Infrared (SWIR) bands unexpectedly showed fast degradation, which is possibly due to unknown substance accumulation along the optical path. To mitigate these SWIR band gain changes, the NOAA VIIRS Sensor Data Record (SDR) team used an automated calibration software package called RSBautoCal. In March 2024, the second middle-mission outgassing event to reverse SWIR band degradation was shown to be successful and its effects are closely monitored. Finally, the deep convective cloud trends and lunar collection results validated the operational F-factors. This paper summarizes the preliminary on-orbit radiometric calibration updates and performance for the NOAA-21 VIIRS SDR products in the RSB. [ABSTRACT FROM AUTHOR]

Holographic synthetic aperture radar (HoloSAR) introduces a cutting-edge three-dimensional (3-D) imaging mode to the field of synthetic aperture radar (SAR), enriching the scattering information of targets by observing them across multiple spatial dimensions. However, independent phase errors among baselines, such as those caused by platform jitter and measurement inaccuracies, pose significant challenges to imaging quality. The phase gradient autofocus (PGA) method effectively estimates phase errors, but struggles to accurately estimate the linear component, causing vertical shift in HoloSAR subaperture imaging result. Therefore, this paper proposes a PGA-based phase error compensation method for HoloSAR to address the vertical shift issue caused by linear phase errors. This method can achieve phase error correction in both the echo domain and image domain with enhanced efficiency. Experimental results of simulated targets and real data from the GOTCHA system demonstrate the effectiveness and practicality of the proposed method. [ABSTRACT FROM AUTHOR]

Using the discrete element method to simulate the interaction between growing media and machinery is an effective method to design seedling machinery and improve the precision of facility horticultural operations. In order to further improve the accuracy of the study on the interaction between seedling block-forming machines and growing media, the growing media used in the production of seedling nursery blocks was taken as the research object, and the Plackett–Burman screening test and Box–Behnken test were conducted based on the discrete element method using the EEPA model to conduct the calibration of discrete element parameters of the growing media. Optimization was conducted with an actual repose angle as the target value, and the optimal combination is as follows: the interparticle collision-recovery coefficient is 0.5066, the collision-recovery coefficient between particles and the geometric model is 0.714, the interparticle dynamic-friction coefficient is 0.381, and the tangential stiffness factor is 0.375. Finally, the soil uniaxial closed compression test was conducted with optimized calibration parameters. The relative error between the maximum axial load on the punch and the measured value in the simulation process was 4.23%, which verified the accuracy and reliability of parameter calibration of the growing media and provided support for the simulation of growing media and optimization of seedling nursery block-forming machine. [ABSTRACT FROM AUTHOR]

The Huairou Solar Observing Station (HSOS) has conducted solar vector magnetic field observations for 40 years and developed multiple vector magnetographs (including one space magnetic field observation instrument). Using these accumulated magnetic field observation data, HSOS has achieved significant progress in solar physics research, including important advancements in the helicity sign rule of solar active regions, the helicity characteristics of strong and weak magnetic fields in active regions, the chromospheric magnetic field characteristics of the Sun, the evolution of magnetic fields in active regions, and the extraction of magnetic field characteristics for flare precursors. However, due to historical reasons, the calibration of vector magnetic field data in HSOS are not standardized. Therefore, this paper summarizes past historical experiences and introduces the standardized calibration procedure for vector magnetic field processing in detail. These calibration procedures are the basic steps of the calibration process for the space vector magnetograph (Full-Disk Vector MagnetoGraph, abbreviated as FMG) observation data, and are also applicable to the calibration of other instrument observation data at HSOS. They mainly include basic processing of polarization data and in-depth processing of vector magnetic fields. We believe that such calibration processing of the historical data collected by HSOS over the past 40 years will help us to accurately measure and analyze the solar magnetic field, further revealing the laws of solar activity and its impact on the Earth's environment. [ABSTRACT FROM AUTHOR]

The upcoming Euro 7 vehicle exhaust emissions regulation includes particle number (PN) limits for all vehicles, not only those with direct fuel injection. It also sets the lower detection particle size of the PN methodology to 10 nm from 23 nm. Recently, a commercial diffusion charger-based PEMS added the possibility of switching the lower size between 23 nm and 10 nm. In this study, we assessed the dual PEMS in the calibration laboratory using diffusion flame soot or spark discharge graphite particles following the regulated procedures. Furthermore, we compared the dual PEMS with a laboratory grade system (LABS) using soot, graphite, and vehicle exhaust particles. To put the results into perspective, we added comparisons (validations) of two additional 23 nm PEMSs with LABSs over a three-year period. The results showed that the differences of the 23 nm PEMSs remained the same (around 35% underestimation) over the years and were similar to the dual PEMS. This difference is still well within the permissible tolerance from the regulation (50%). We argued that the reason is the calibration material used by the manufacturer (spark discharge graphite). We demonstrated that calibrating with combustion soot could reduce the differences. The 10 nm PEMS gave similar results but with much smaller differences, indicating that the calibration material is of less importance for the Euro 7 step. The results showed that the measurement uncertainty has not increased but rather decreased for the specific PEMS switching from 23 nm to 10 nm. [ABSTRACT FROM AUTHOR]

Deep learning approaches have been gaining importance in several applications. However, the widespread use of these methods in safety-critical domains, such as Autonomous Driving, is still dependent on their reliability and trustworthiness. The goal of this paper is to provide a review of deep learning-based uncertainty methods and their applications to support perception tasks for Autonomous Driving. We detail significant Uncertainty Quantification and calibration methods, and their contributions and limitations, as well as important metrics and concepts. We present an overview of the state of the art of out-of-distribution detection and active learning, where uncertainty estimates are commonly applied. We show how these methods have been applied in the automotive context, providing a comprehensive analysis of reliable AI for Autonomous Driving. Finally, challenges and opportunities for future work are discussed for each topic. [ABSTRACT FROM AUTHOR]

Marker-less hand–eye calibration permits the acquisition of an accurate transformation between an optical sensor and a robot in unstructured environments. Single monocular cameras, despite their low cost and modest computation requirements, present difficulties for this purpose due to their incomplete correspondence of projected coordinates. In this work, we introduce a hand–eye calibration procedure based on the rotation representations inferred by an augmented autoencoder neural network. Learning-based models that attempt to directly regress the spatial transform of objects such as the links of robotic manipulators perform poorly in the orientation domain, but this can be overcome through the analysis of the latent space vectors constructed in the autoencoding process. This technique is computationally inexpensive and can be run in real time in markedly varied lighting and occlusion conditions. To evaluate the procedure, we use a color-depth camera and perform a registration step between the predicted and the captured point clouds to measure translation and orientation errors and compare the results to a baseline based on traditional checkerboard markers. [ABSTRACT FROM AUTHOR]

Weather radar is an active remote sensing device used to monitor the full lifecycle changes in severe convective weather with high spatial and temporal resolution. Effective radar calibration is a crucial foundation for ensuring the high-quality application of observational data. This paper utilizes a UAV platform equipped with a high-precision RTK system and standard metal spheres to study the principles and methods of metal sphere calibration, constructing a complete calibration process and calibration accuracy evaluation metrics. Additionally, a collocated radar comparison observation experiment was conducted for cross-validation, and metal sphere calibration tests were performed on problematic radars. The experimental results indicate the following: (1) The combined application of a high-precision RTK system and a laser range camera can provide real-time position information on the metal sphere, improving the efficiency of radar target acquisition. (2) The calibration method based on UAV-suspended metal spheres can periodically conduct the quantitative calibration of Z and ZDR, achieving calibration accuracies within 0.5 dB and 0.2 dB, respectively, and supports the qualitative inspection of key parameters such as beamwidth and pulse width. (3) During field tests, a high success rate "coarse adjustment + fine adjustment + staring" sphere-finding technique was established, based on automatic switching between RHI, PPI, and FIX scanning modes. This method directs the UAV to adjust the metal sphere to the center of the radar distance bin, reducing the impact of uneven beam filling and bin crossing, ensuring the accuracy of scattering characteristic measurements. [ABSTRACT FROM AUTHOR]

The StarDICE experiment strives to establish an instrumental metrology chain with a targeted accuracy of 1 mmag in griz bandpasses to meet the calibration requirements of next-generation cosmological surveys. Atmospheric transmission is a significant source of systematic uncertainty. We propose a solution relying on an uncooled infrared thermal camera to evaluate gray extinction variations. However, achieving accurate measurements with thermal imaging systems necessitates prior calibration due to temperature-induced effects, compromising their spatial and temporal precision. Moreover, these systems cannot provide scene radiance in physical units by default. This study introduces a new calibration process utilizing a tailored forward modeling approach. The method incorporates sensor, housing, flat-field support, and ambient temperatures, along with raw digital response, as input data. Experimental measurements were conducted inside a climatic chamber, with a FLIR Tau2 camera imaging a thermoregulated blackbody source. The results demonstrate the calibration effectiveness, achieving precise radiance measurements with a temporal pixel dispersion of 0.09 W   m − 2   sr − 1 and residual spatial noise of 0.03 W   m − 2   sr − 1 . We emphasize that the accuracy of scene radiance retrieval can be systematically affected by the camera's close thermal environment, especially when the ambient temperature exceeds that of the scene. [ABSTRACT FROM AUTHOR]

Ultra-short baseline (USBL) underwater positioning systems are widely used in marine scientific research and ocean engineering. Angle misalignment is a main error that reduces the accuracy of USBL underwater positioning. The conventional angle-calibration method assumes that the transponder position obtained by USBL positioning is an errorless coefficient matrix. However, errors inevitably exist in the estimation of the transponder's position via USBL positioning, and the precision varies at different epochs. Ignoring the error in the transponder's position will significantly reduce the precision of the angle misalignment estimation. In this paper, a new angle-calibration method is proposed for precise USBL underwater positioning. The angle alignment model is derived by treating the transponder's position obtained by USBL positioning as an observation, and the stochastic model is then established according to the bearing angles. Robust estimation is likewise applied to further improve the precision of the angle misalignment estimation. To verify the performance of the proposed method, a sea experiment was performed. The results show that the new method has high calibration accuracy and robustness. The estimation precision of this method is improved by 0.0457°~0.6896° in heading, 0.0125°~0.8072° in roll, and 0.0077°~0.9436° in pitch, compared with that of the conventional angle alignment method. [ABSTRACT FROM AUTHOR]

The ionospheric effects in repeat-pass SAR interferometry (InSAR) have become a rising concern with the increasing interest in low-frequency SAR. The ionosphere will introduce serious phase errors in the interferogram, which should be properly corrected. In this paper, the influence of the wavenumber shift on the Range Split-Spectrum (RSS) method is analyzed quantitatively. It is shown that the split-spectrum processing deteriorates the coherence of the sub-band interferogram and then greatly reduces the estimation accuracy. The RSS method combined with common band filtering (CBF) can improve the coherence of sub-band interferograms and estimation accuracy, but the estimation is biased due to the RSS model mismatch. To address the problem, a modified truncated singular value decomposition (MTSVD) based multi-sub-band RSS method is proposed in this paper. The proposed method divides the range common spectrum into multiple sub-bands to jointly estimate the ionospheric phase. The performance of the proposed method is analyzed and validated based on simulation experiments. The results show that the proposed method has stronger robustness and higher accuracy. [ABSTRACT FROM AUTHOR]

It is well known that errors are inevitable in experimental observations, but it is equally unavoidable to eliminate errors in modeling the process leading to the experimental observations. If estimation and prediction are to be done with reasonable accuracy, the accumulated errors must be adequately managed. Research in fatigue is challenging because modeling can be quite complex. Furthermore, experimentation is time-consuming, which frequently yields limited data. Both of these exacerbate the magnitude of the potential error. The purpose of this paper is to demonstrate a procedure that combines modeling with independent experimental data to improve the estimation of the cumulative distribution function (cdf) for fatigue life. Subsequently, the effect of intrinsic error will be minimized. Herein, a simplified fatigue crack growth modeling is used. The data considered are a well-known collection of fatigue lives for an aluminum alloy. For lower applied stresses, the fatigue lives can range over an order of magnitude and up to 107 cycles. For larger applied stresses, the scatter in the lives is considerably reduced. Consequently, modeling must encompass a variety of conditions. The primary conclusion of the effort is that merging independent experimental data with a reasonably acceptable model vastly improves the accuracy of the calibrated cdfs for fatigue life, given the loading conditions. This allows for improved life estimation and prediction. For the aluminum data, the calibrated cdfs are shown to be quite good by using statistical goodness-of-fit tests, stress-life (S-N) analysis, and confidence bounds estimated using the mean square error (MSE) method. A short investigation into the effect of sample size is also included. Thus, the proposed methodology is warranted. [ABSTRACT FROM AUTHOR]

Studies have shown that vehicle trajectory data are effective for calibrating microsimulation models. Light Detection and Ranging (LiDAR) technology offers high-resolution 3D data, allowing for detailed mapping of the surrounding environment, including road geometry, roadside infrastructures, and moving objects such as vehicles, cyclists, and pedestrians. Unlike other traditional methods of trajectory data collection, LiDAR's high-speed data processing, fine angular resolution, high measurement accuracy, and high performance in adverse weather and low-light conditions make it well suited for applications requiring real-time response, such as autonomous vehicles. This research presents a comprehensive framework for integrating LiDAR sensor data into simulation models and their accurate calibration strategies for proactive safety analysis. Vehicle trajectory data were extracted from LiDAR point clouds collected at six urban signalized intersections in Lubbock, Texas, in the USA. Each study intersection was modeled with PTV VISSIM and calibrated to replicate the observed field scenarios. The Directed Brute Force method was used to calibrate two car-following and two lane-change parameters of the Wiedemann 1999 model in VISSIM, resulting in an average accuracy of 92.7%. Rear-end conflicts extracted from the calibrated models combined with a ten-year historical crash dataset were fitted into a Negative Binomial (NB) model to estimate the model's parameters. In all the six intersections, rear-end conflict count is a statistically significant predictor (p-value < 0.05) of observed rear-end crash frequency. The outcome of this study provides a framework for the combined use of LiDAR-based vehicle trajectory data, microsimulation, and surrogate safety assessment tools to transportation professionals. This integration allows for more accurate and proactive safety evaluations, which are essential for designing safer transportation systems, effective traffic control strategies, and predicting future congestion problems. [ABSTRACT FROM AUTHOR]

This paper addresses the challenges of calibrating low-cost electrochemical sensor systems for air quality monitoring. The proliferation of pollutants in the atmosphere necessitates efficient monitoring systems, and low-cost sensors offer a promising solution. However, issues such as drift, cross-sensitivity, and inter-unit consistency have raised concerns about their accuracy and reliability. The study explores the following three calibration methods for converting sensor signals to concentration measurements: utilizing manufacturer-provided equations, incorporating machine learning (ML) algorithms, and directly applying ML to voltage signals. Experiments were performed in three urban sites in Greece. High-end instrumentation provided the reference concentrations for training and evaluation of the model. The results reveal that utilizing voltage signals instead of the manufacturer's calibration equations diminishes variability among identical sensors. Moreover, the latter approach enhances calibration efficiency for CO, NO, NO2, and O3 sensors while incorporating voltage signals from all sensors in the ML algorithm, taking advantage of cross-sensitivity to improve calibration performance. The Random Forest ML algorithm is a promising solution for calibrating similar devices for use in urban areas. [ABSTRACT FROM AUTHOR]

To better address mechanical behavior, it is necessary to make use of modern tools through which it is possible to run predictions, simulate scenarios, and optimize decisions. sources integration. This will increase the capability of detecting material modifications that forerun damage and/or to forecast the stage in the future when very likely fatigue is initiating and propagating cracks. Early warning outcomes obtained by the synergetic implementation of NDE-based protocols for studying mechanical and fatigue and fracture behavior will enhance the preparedness toward economically sustainable future damage control scenarios. Specifically, these early warning outcomes will be developed in the form of retopologized models to be used coupled with FEA. This paper presents the first stage of calibration and the combination of a system of different sensors (photogrammetry, laser scanning and strain gages) for the creation of volumetric models suitable for the prediction of failure of FEA software. The test objects were two components of car suspension to which strain gauges were attached to measure its deformation under cyclic loading. The calibration of the methodology was carried out using models obtained from photogrammetry and experimental strain gauge measurements. [ABSTRACT FROM AUTHOR]

Calibrating optical sensors has become a priority to maintain data quality and ensure consistency among sensors from different agencies. Achieving and monitoring radiometric calibration often involves the identification of temporally stable targets on the Earth's surface. Although some locations across North Africa have traditionally been used as primary targets for calibration purposes, it is crucial to explore alternative options to account for potential changes in these sites over time. This study conducted a global assessment of pixel-level temporal stability using Landsat 8 OLI data, with the primary goal of identifying regions suitable for global radiometric calibration efforts. This work followed a two-stage approach, including the testing and selection of an effective combination of statistical tests to differentiate between temporally stable and unstable pixels and the generation of a worldwide mosaic of temporally stable pixels through a per-pixel statistical analysis employing a combination of Spearman's rho and Pettitt's test for assessing long-term trends and detecting change points. Notably, comparing the temporal mean top-of-atmosphere (TOA) reflectance before and after applying the generated temporal filter to a site with documented unstable pixels revealed a substantial reduction in mean variation, up to 6%. In addition, slopes observed in the pre-filter mean TOA reflectance, ranging between −0.002 and −0.005, became zero or near-zero and statistically insignificant after the temporal filter was applied, demonstrating a reduction in total uncertainties by 3 to 4%. These findings evidence the potential of this work, placing it as a potential foundation in the continuous search to identify additional targets for global radiometric calibration efforts. [ABSTRACT FROM AUTHOR]

Optical satellite data products (e.g., Sentinel-2, PlanetScope, Landsat) require proper validation across diverse ecosystems. This has conventionally been achieved using airborne and more recently unmanned aerial vehicle (UAV) based hyperspectral sensors which constrain operations by both their cost and complexity of use. The MicaSense Altum is an accessible multispectral sensor that integrates a radiometric thermal camera with 5 bands (475 nm–840 nm). In this work we assess the spectral reflectance accuracy of a UAV-mounted MicaSense Altum at 25, 50, 75, and 100 m AGL flight altitudes using the manufacturer provided panel-based reflectance conversion technique for atmospheric correction at the Mer Bleue peatland supersite near Ottawa, Canada. Altum derived spectral reflectance was evaluated through comparison of measurements of six known nominal reflectance calibration panels to in situ spectroradiometer and hyperspectral UAV reflectance products. We found that the Altum sensor saturates in the 475 nm band viewing the 18% reflectance panel, and for all brighter panels for the 475, 560, and 668 nm bands. The Altum was assessed against pre-classified hummock-hollow-lawn microtopographic features using band level pair-wise comparisons and common vegetation indices to investigate the sensor's viability as a validation tool of PlanetScope Dove 8 band and Sentinel-2A satellite products. We conclude that the use of the Altum needs careful consideration, and its field deployment and reflectance output does not meet the necessary cal/val requirements in the peatland site. [ABSTRACT FROM AUTHOR]

To date, various methods have been proposed for calibrating polarimetric synthetic aperture radar (SAR) using distributed targets. Some studies have utilized the covariance matching estimation technique (Comet) for SAR data calibration. However, practical applications have revealed issues stemming from ill-conditioned problems due to the analytical solution in the iterative process. To tackle this challenge, an improved method called Comet IS is introduced. Firstly, we introduce an outlier detection mechanism which is based on the Quegan algorithm's results. Next, we incorporate an initial search approach which is based on the interior point method for recalibration. With the outlier detection mechanism in place, the algorithm can recalibrate iteratively until the results are correct. Simulation experiments reveal that the improved algorithm outperforms the original one. Furthermore, we compare the improved method with Quegan and Ainsworth algorithms, demonstrating its superior performance in calibration. Furthermore, we validate our method's advancement using real data and corner reflectors. Compared with the other two algorithms, the improved performance in crosstalk isolation and channel imbalance is significant. This research provides a more reliable and effective approach for polarimetric SAR calibration, which is significant for enhancing SAR imaging quality. [ABSTRACT FROM AUTHOR]

This work focuses on investigating the accuracy of 3D reconstructions from fixed stereo-photogrammetric monitoring systems through different camera calibration procedures. New reliable and effective calibration methodologies that require minimal effort and resources are presented. A full-format camera equipped with fixed 50 and 85 mm focal length optics is considered, but the methodologies are general and can be applied to other systems. Four different calibration strategies are considered: (i) full-field calibration (FF); (ii) multi-image on-the-job calibration (MI); (iii) point cloud-based calibration (PC); and (iv) self (on-the-job) calibration (SC). To evaluate the calibration strategies and assess their actual performance and practicality, two test sites are used. The full-field calibration, while very reliable, demands significant effort if it needs to be repeated. The multi-image strategy emerges as a favourable compromise, offering good results with minimal effort for its realisation. The point cloud-based method stands out as the optimal choice, balancing ease of implementation with quality results; however, it requires a reference 3D point cloud model. On-the-job calibration with monitoring images is the simplest but least reliable option, prone to uncertainty and potential inaccuracies, and should hence be avoided. Ultimately, prioritising result reliability over absolute accuracy is paramount in continuous monitoring systems. [ABSTRACT FROM AUTHOR]

A novel design of a MEMS (Micro-Electromechanical System) capacitive accelerometer fabricated by surface micromachining, with a structure enabling precise auto-calibration during operation, is presented. Precise auto-calibration was introduced to ensure more accurate acceleration measurements compared to standard designs. The standard mechanical structure of the accelerometer (seismic mass integrated with elastic suspension and movable plates coupled with fixed plates forming a system of differential sensing capacitors) was equipped with three movable detection electrodes coupled with three fixed electrodes, thus creating three atypical tunneling displacement transducers detecting three specific positions of seismic mass with high precision, enabling the auto-calibration of the accelerometer while it was being operated. Auto-calibration is carried out by recording the accelerometer indication while the seismic mass occupies a specific position, which corresponds to a known value of acting acceleration determined in a pre-calibration process. The diagram and the design of the mechanical structure of the accelerometer, the block diagram of the electronic circuits, and the mathematical relationships used for auto-calibration are presented. The results of the simulation studies related to mechanical and electric phenomena are discussed. [ABSTRACT FROM AUTHOR]

The data fusion of a 3-D light detection and ranging (LIDAR) point cloud and a camera image during the creation of a 3-D map is important because it enables more efficient object classification by autonomous mobile robots and facilitates the construction of a fine 3-D model. The principle behind data fusion is the accurate estimation of the LIDAR–camera's external parameters through extrinsic calibration. Although several studies have proposed the use of multiple calibration targets or poses for precise extrinsic calibration, no study has clearly defined the relationship between the target positions and the data fusion accuracy. Here, we strictly investigated the effects of the deployment of calibration targets on data fusion and proposed the key factors to consider in the deployment of the targets in extrinsic calibration. Thereafter, we applied a probability method to perform a global and robust sampling of the camera external parameters. Subsequently, we proposed an evaluation method for the parameters, which utilizes the color ratio of the 3-D colored point cloud map. The derived probability density confirmed the good performance of the deployment method in estimating the camera external parameters. Additionally, the evaluation quantitatively confirmed the effectiveness of our deployments of the calibration targets in achieving high-accuracy data fusion compared with the results obtained using the previous methods. [ABSTRACT FROM AUTHOR]

For mobile robots, the high-precision integrated calibration and structural robustness of multi-sensor systems are important prerequisites for ensuring healthy operations in the later stage. Currently, there is no well-established validation method for the calibration accuracy and structural robustness of multi-sensor systems, especially for dynamic traveling situations. This paper presents a novel validation method for the calibration accuracy and structural robustness of a multi-sensor mobile robot. The method employs a ground–object–air cooperation mechanism, termed the "ground surface simulation field (GSSF)—mobile robot -photoelectric transmitter station (PTS)". Firstly, a static high-precision GSSF is established with the true north datum as a unified reference. Secondly, a rotatable synchronous tracking system (PTS) is assembled to conduct real-time pose measurements for a mobile vehicle. The relationship between each sensor and the vehicle body is utilized to measure the dynamic pose of each sensor. Finally, the calibration accuracy and structural robustness of the sensors are dynamically evaluated. In this context, epipolar line alignment is employed to assess the accuracy of the evaluation of relative orientation calibration of binocular cameras. Point cloud projection and superposition are utilized to realize the evaluation of absolute calibration accuracy and structural robustness of individual sensors, including the navigation camera (Navcam), hazard avoidance camera (Hazcam), multispectral camera, time-of-flight depth camera (TOF), and light detection and ranging (LiDAR), with respect to the vehicle body. The experimental results demonstrate that the proposed method offers a reliable means of dynamic validation for the testing phase of a mobile robot. [ABSTRACT FROM AUTHOR]

As the basic application of fiber optic sensing technology, strain measurement accuracy as a key index needs to be further calibrated and analyzed. In this paper, accuracy calibration experiments and the related analyses of two fiber-optic sensing technologies, the fiber-optic grating (FBG) and optical frequency domain reflectometry (OFDR), are carried out using a standard beam of equal strength and a mature resistive strain gauge (ESG). The fiber-optic single-point strain data for loading and unloading changes of the beams of equal strength show good continuity and linearity, with good cyclic stability, and the error in the strain test data is less than 2% after repeated loading. At the same time, using finite element theory to analyze the data and using the measured data error within 5%, a good strain test curve linearity is achieved and R2 is better than 0.998. After repeated loading and unloading tests, it is verified that the fiber grating and the distributed optical fiber in the strain test have good stability in repeatability accuracy. The calibration experiments and data analysis in this paper further illustrate the three sensing technologies in determining the strain test accuracy and the advantages and disadvantages of the indicators, and the development of the fiber optic sensing technology application provides basic technical support. [ABSTRACT FROM AUTHOR]

Existing galvanometer-based laser-scanning systems are challenging to apply in multi-scale 3D reconstruction because of the difficulty in achieving a balance between a high reconstruction accuracy and a wide reconstruction range. This paper presents a novel method that synchronizes laser scanning by switching the field-of-view (FOV) of a camera using multi-galvanometers. Beyond the advanced hardware setup, we establish a comprehensive geometric model of the system by modeling dynamic camera, dynamic laser, and their combined interaction. Furthermore, since existing calibration methods mainly focus on either dynamic lasers or dynamic cameras and have certain limitations, we propose a novel high-precision and flexible calibration method by constructing an error model and minimizing the objective function. The performance of the proposed method was evaluated by scanning standard components. The results show that the proposed 3D reconstruction system achieves an accuracy of 0.3 mm when the measurement range is extended to 1100 mm × 1300 mm × 650 mm. This demonstrates that for meter-scale reconstruction ranges, a sub-millimeter measurement accuracy is achieved, indicating that the proposed method realizes multi-scale 3D reconstruction and simultaneously allows for high-precision and wide-range 3D reconstruction in industrial applications. [ABSTRACT FROM AUTHOR]

Optical tracking of head pose via fiducial markers has been proven to enable effective correction of motion artifacts in the brain during magnetic resonance imaging but remains difficult to implement in the clinic due to lengthy calibration and set up times. Advances in deep learning for markerless head pose estimation have yet to be applied to this problem because of the sub-millimetre spatial resolution required for motion correction. In the present work, two optical tracking systems are described for the development and training of a neural network: one marker-based system (a testing platform for measuring ground truth head pose) with high tracking fidelity to act as the training labels, and one markerless deep-learning-based system using images of the markerless head as input to the network. The markerless system has the potential to overcome issues of marker occlusion, insufficient rigid attachment of the marker, lengthy calibration times, and unequal performance across degrees of freedom (DOF), all of which hamper the adoption of marker-based solutions in the clinic. Detail is provided on the development of a custom moiré-enhanced fiducial marker for use as ground truth and on the calibration procedure for both optical tracking systems. Additionally, the development of a synthetic head pose dataset is described for the proof of concept and initial pre-training of a simple convolutional neural network. Results indicate that the ground truth system has been sufficiently calibrated and can track head pose with an error of <1 mm and <1°. Tracking data of a healthy, adult participant are shown. Pre-training results show that the average root-mean-squared error across the 6 DOF is 0.13 and 0.36 (mm or degrees) on a head model included and excluded from the training dataset, respectively. Overall, this work indicates excellent feasibility of the deep-learning-based approach and will enable future work in training and testing on a real dataset in the MRI environment. [ABSTRACT FROM AUTHOR]

As on-orbit space cameras evolve toward larger apertures, wider fields of view, and deeper cryogenic environments, achieving absolute radiometric calibration using an all-optical path blackbody reference source in orbit becomes increasingly challenging. Consequently, stars have emerged as a novel in-orbit standard source. However, due to differences in camera bands, directly obtaining the stellar radiance flux corresponding to specific camera bands is not feasible. In order to address this challenge, we propose a method for estimating radiance flux based on the MSX star catalog, which integrates a dual-band thermometry method with an improved grey wolf optimization (I-GWO) algorithm. In an experiment, we analyzed 351 stars with temperatures ranging from 4000 to 7000 K. The results indicate that our method achieved a temperature estimation accuracy of less than 10% for 83.5% of the stars, with an average estimation error of 5.82%. Compared with previous methods based on star catalogs, our approach significantly enhanced the estimation accuracy by 75.4%, improved algorithm stability by 91.3%, and reduced the computation time to only 3% of that required by other methods. Moreover, the on-orbit star calibration error using our stellar radiance flux estimation method remained within 5%. This study effectively leveraged the extensive data available in star catalogs, providing substantial support for the development of an infrared star calibration network, which holds significant value for the in-orbit calibration of large-aperture cameras. Future research will explore the potential applicability of this method across different spectral bands. [ABSTRACT FROM AUTHOR]

X-ray fluorescence (XRF) core scanners are commonly used for fine-scale geochemical analysis in sediment studies, but data are semi-quantitative and require calibration to convert geochemical element counts to concentrations. Application of XRF core scanning in soil science remains largely untapped. This study employed an ITRAX core scanner to scan grassland soil cores and developed a novel calibration method based on a chemometric approach to characterise soil geochemistry. As soil samples are collected based on depth sampling, this study investigated whether higher resolution element concentrations could be inferred from lower resolution reference samples and if regression models from multiple cores could apply to a new core at the same resolution. Reference concentrations were obtained for all cores at 10 cm intervals, with validation conducted at 1 cm for a single core. Two calibration curve types were proposed: one based on the single core's 10 cm data to validate references at 1 cm intervals; and another using all cores, with each core serving as a test item after exclusion from the training set. Various preprocessing measures and feature selection techniques were tested. Results showed successful calibration for elements Ca, P, Zn, Sr, and S, with high R 2 values of 0.94, 0.93, 0.93, 0.92 and 0.91, respectively. The study presents a novel method for calibrating XRF core scanning element counts, demonstrating its potential for high-resolution soil analysis. [ABSTRACT FROM AUTHOR]

Event-based models focus on modelling of peak runoff from rainfall data. Conceptual models indicate simplified models that provide reasonably accurate answers despite their crude nature. Rainfall-runoff models are used to transform a rainfall event into a runoff event. This paper focuses on reviewing computational simulation of rainfall-runoff processes over a catchment. Lumped conceptual, event-based rainfall-runoff models have remained the dominant practice for design flood estimation in Australia for many years due to their simplicity, flexibility, and accuracy under certain conditions. Attempts to establish regionalization methods for prediction of design flood hydrographs in ungauged catchments have seen little success. Therefore, as well as reviewing key rainfall-runoff model components for design flood estimation with a special focus on event-based conceptual models, this paper covers the aspects of regionalization to promote their applications to ungauged catchments. [ABSTRACT FROM AUTHOR]

The use of low-cost environmental sensors has gained significant attention due to their affordability and potential to intensify environmental monitoring networks. These sensors enable real-time monitoring of various environmental parameters, which can help identify pollution hotspots and inform targeted mitigation strategies. Low-cost sensors also facilitate citizen science projects, providing more localized and granular data, and making environmental monitoring more accessible to communities. However, the accuracy and reliability of data generated by these sensors can be a concern, particularly without proper calibration. Calibration is challenging for low-cost sensors due to the variability in sensing materials, transducer designs, and environmental conditions. Therefore, standardized calibration protocols are necessary to ensure the accuracy and reliability of low-cost sensor data. This review article addresses four critical questions related to the calibration and accuracy of low-cost sensors. Firstly, it discusses why low-cost sensors are increasingly being used as an alternative to high-cost sensors. In addition, it discusses self-calibration techniques and how they outperform traditional techniques. Secondly, the review highlights the importance of selectivity and sensitivity of low-cost sensors in generating accurate data. Thirdly, it examines the impact of calibration functions on improved accuracies. Lastly, the review discusses various approaches that can be adopted to improve the accuracy of low-cost sensors, such as incorporating advanced data analysis techniques and enhancing the sensing material and transducer design. The use of reference-grade sensors for calibration and validation can also help improve the accuracy and reliability of low-cost sensor data. In conclusion, low-cost environmental sensors have the potential to revolutionize environmental monitoring, particularly in areas where traditional monitoring methods are not feasible. However, the accuracy and reliability of data generated by these sensors are critical for their successful implementation. Therefore, standardized calibration protocols and innovative approaches to enhance the sensing material and transducer design are necessary to ensure the accuracy and reliability of low-cost sensor data. [ABSTRACT FROM AUTHOR]

Two shape-sensing algorithms, the calibration matrix (CM) method and the inverse Finite Element Method (iFEM), were compared on their ability to accurately reconstruct displacements, strains, and loads and on their computational efficiency. CM reconstructs deformation through a linear combination of known load cases using the sensor data measured for each of these known load cases and the sensor data measured for the actual load case. iFEM reconstructs deformation by minimizing a least-squares error functional based on the difference between the measured and numerical values for displacement and/or strain. In this study, CM is covered in detail to determine the applicability and practicality of the method. The CM results for several benchmark problems from the literature were compared to the iFEM results. In addition, a representative aerospace structure consisting of a twisted and tapered blade with a NACA 6412 cross-sectional profile was evaluated using quadratic hexahedral solid elements with reduced integration. Both methods assumed linear elastic material conditions and used discrete displacement sensors, strain sensors, or a combination of both to reconstruct the full displacement and strain fields. In our study, surface-mounted and distributed sensors throughout the volume of the structure were considered. This comparative study was performed to support the growing demand for load monitoring, specifically for applications where the sensor data is obtained from discrete and irregularly distributed points on the structure. In this study, the CM method was shown to achieve greater accuracy than iFEM. Averaged over all the load cases examined, the CM algorithm achieved average displacement and strain errors of less than 0.01%, whereas the iFEM algorithm had an average displacement error of 21% and an average strain error of 99%. In addition, CM also achieved equal or better computational efficiency than iFEM after initial set-up, with similar first solution times and faster repeat solution times by a factor of approximately 100, for hundreds to thousands of sensors. [ABSTRACT FROM AUTHOR]

High-resolution and wide-swath (HRWS) synthetic aperture radar (SAR) imaging with azimuth multi-channel always suffers from channel phase and amplitude errors. Compared with spatial-invariant error, the range-dependent channel phase error is intractable due to its spatial dependency characteristic. This paper proposes a novel parameterized channel equalization approach to reconstruct the unambiguous SAR imagery. First, a linear model is established for the range-dependent channel phase error, and the sharpness of the reconstructed Doppler spectrum is used to measure the unambiguity quality. Furthermore, the intrinsic relationship between the channel phase errors and the sharpness is revealed, which allows us to estimate the optimal parameters by maximizing the sharpness of the reconstructed Doppler spectrum. Finally, the results from real-measured data show that the suggested method performs exceptionally for ambiguity suppression in HRWS SAR imaging. [ABSTRACT FROM AUTHOR]

The non-scanning radiometer with short-wavelength (SW: 0.2–5.0 μm) and total-wavelength (TW: 0.2–50.0 μm) channels is the primary payload of the Integrated Earth–Moon Radiation Observation System (IEMROS), which is designed to provide comprehensive Earth radiation measurements and lunar calibrations at the L1 Lagrange point of the Earth–Moon system from a global perspective. This manuscript introduces a radiometer preflight calibration methodology, which involves background removal and is validated using accurate and traceable reference sources. Simulated Earth view tests are performed to evaluate repeatability, linearity, and gain coefficients over the operating range. Both channels demonstrate repeatability uncertainties better than 0.34%, indicating consistent and reliable measuring performance. Comparative polynomial regression analysis confirms significant linear response characteristics with two-channel nonlinearity less than 0.20%. Gain coefficients are efficiently determined using a two-point calibration approach. Uncertainty analysis reveals an absolute radiometric calibration accuracy of 0.97% for the SW channel and 0.92% for the TW channel, underscoring the non-scanning radiometer's capability to provide dependable global Earth radiation budget data crucial to environmental and climate studies. [ABSTRACT FROM AUTHOR]

A panchromatic and multispectral sensor (PMS) and a wide-field-of-view (WFV) sensor were fitted aboard the Gaofen6 (GF6) satellite, which was launched on 2 June 2018. This study used the Landsat9-Operational Land Imager 2 and Sentinel2-Multispectral Instrument as reference sensors to perform radiometric cross-calibration on GF6-PMS and WFV data at the Dunhuang calibration site. The four selected sensor images were all acquired on the same day. The results indicate that: the calibration results between different reference sensors can be controlled within 3%, with the maximum difference from the official coefficients being 8.78%. A significant difference was observed between the coefficients obtained by different reference sensors when spectral band adjustment factor (SBAF) correction was not performed; from the two sets of validation results, the maximum mean relative difference in the near-infrared band was 9.46%, with the WFV sensor showing better validation results. The validation of calibration coefficients based on synchronous ground observation data and the analysis of the impact of different SBAF methods on the calibration results indicated that Landsat9 is more suitable as a reference sensor for radiometric cross-calibration of GF6-PMS and WFV. [ABSTRACT FROM AUTHOR]

The ECOSTRESS push-whisk thermal radiometer on the International Space Station provides the highest spatial resolution temperature retrievals over the ocean that are currently available. It is a precursor to the future TRISHNA (CNES/ISRO), SBG (NASA), and LSTM (ESA) 50 to 70 m scale missions. Radiance transfer simulations and triple collocations with in situ ocean observations and NOAA L2P geostationary satellite ocean temperature retrievals were used to characterize brightness temperature biases and their sources in ECOSTRESS Collection 1 (software Build 6) data for the period 12 January 2019 to 31 October 2022. Radiometric noise, non-uniformities in the focal plane array, and black body temperature dynamics were characterized in ocean scenes using L1A raw instrument data, L1B calibrated radiances, and L2 skin temperatures. The mean brightness temperature biases were −1.74, −1.45, and −1.77 K relative to radiance transfer simulations in the 8.78, 10.49, and 12.09 µm wavelength bands, respectively, and skin temperatures had a −1.07 K bias relative to in situ observations. Cross-track noise levels range from 60 to 600 mK and vary systematically along the focal plane array and as a function of wavelength band and scene temperature. Overall, radiometric uncertainty is most strongly influenced by cross-track noise levels and focal plane non-uniformity. Production of an ECOSTRESS sea surface temperature product that meets the requirements of the SST community will require calibration methods that reduce the biases, noise levels, and focal plane non-uniformities. [ABSTRACT FROM AUTHOR]

To provide ongoing continuity for the ocean, cloud, and aerosol science data records, NASA will launch the Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission on 8 February 2024. The Ocean Color Instrument (OCI) is the primary sensor onboard PACE and will provide ocean color science data to continue the data sets collected by heritage sensors MODIS, SeaWiFS, and VIIRS, but with increased spectral coverage and improved accuracy. The OCI is a grating spectrometer with hyperspectral coverage from the ultraviolet (about 315 nm) to near-infrared (about 900 nm), with additional filtered channels in the short-wave infrared (940 nm–2260 nm). A rigorous ground test program was conducted to calibrate the instrument and ensure that the calibration can be transferred to on-orbit operations in order to achieve the high levels of accuracy demanded by the science community. Some calibration parameters, such as polarization sensitivity, can only be measured during pre-launch testing. Tests were performed to measure the Mueller matrix components necessary to correct polarized scenes encountered on orbit. Measurements covered all spectral bands and a series of telescope scan angles encompassing the expected on-orbit scan range. The sensitivity (linear diattenuation) was measured above 340 nm to be below 0.6%, except at wavelengths, and was characterized as better than 0.1%. Below 340 nm, the sensitivity can be much higher, but this is not expected to affect the science data significantly. These results indicate that any polarized scenes encountered on orbit can be corrected with a high degree of confidence. [ABSTRACT FROM AUTHOR]

The redshifted 21 cm line signal is a powerful probe of the cosmic dawn and the epoch of reionization. The global spectrum can potentially be detected with a single antenna and spectrometer. However, this measurement requires an extremely accurate calibration of the instrument to facilitate the separation of the 21 cm signal from the much brighter foregrounds and possible variations in the instrument response. Understanding how the measurement errors propagate in a realistic instrument system and affect system calibration is the focus of this work. We simulate a 21 cm global spectrum observation based on the noise wave calibration scheme. We focus on how measurement errors in reflection coefficients affect the noise temperature and how typical errors impact the recovery of the 21 cm signal, especially in the frequency domain. Results show that for our example set up, a typical vector network analyzer (VNA) measurement error in the magnitude of the reflection coefficients of the antenna, receiver, and open cable, which are 0.001, 0.001, and 0.002 (linear), respectively, would result in a 200 mK deviation on the detected signal, and a typical measurement error of 0.48 ° , 0.78 ° , or 0.15 ° in the respective phases would cause a 40 mK deviation. The VNA measurement error can greatly affect the result of a 21 cm global spectrum experiment using this calibration technique, and such a feature could be mistaken for or be combined with the 21 cm signal. [ABSTRACT FROM AUTHOR]