Search

Enhancing the dynamic properties of expansive soils using cementitious materials has attracted the attention of many researchers over the past few decades. Supplementary cementitious materials (SCMs) can be used as partial substitutes for cement owing to their pozzolanic activity that further improves the mechanical performance of cement-stabilized soils upon curing. In this study, the effect of cement and zeolite incorporation on the mechanical behavior of expansive clay was quantified using the pressure wave velocity (Vp) indicator obtained from ultrasonic pulse velocity tests performed at different curing times. Furthermore, a polynomial model was developed to establish the relationship between Vp and zeolite replacement levels at specific curing times and cement contents. The results show that a polynomial function captured the decreasing trend of Vp upon the increase in zeolite at curing times below 14 days. Additionally, the developed equation explained the upward trend of Vp owing to the pozzolanic activity of zeolite at later curing times with an accuracy of over 92%. The coefficients of the polynomial model also increased with the increment of the cement percentage which conformed to the consecutive rise in Vp. Ultimately, the polynomial coefficients were expressed in terms of cement content and curing time using the Volterra series. Using this model, the optimum percentage of cement replaced with zeolite (Zopt), the efficiency of using Zopt instead of cement, and the percentage of zeolite replacement to achieve equivalent Vp of cemented clay samples (ZC) were estimated. The findings of this study contribute to promoting geotechnical sustainability by replacing cement with zeolite that has a considerably lower environmental footprint. Clay is a type of soil that can be found in many construction projects. For instance, many roads and buildings' foundations are constructed on clay soils. To ensure the necessary strength of the clay under the main structure, the soil should often be stabilized using adhesive construction materials such as cement. Interestingly, a portion of the cement could be replaced with other minerals not only to improve engineering performance but also to promote sustainability by lowering cement consumption. In this study, the effect of zeolite as a partial replacement for cement on the strength of clay soils was experimentally evaluated. The effect of various design parameters, such as cement replacement level and curing time, on the stability of clays was investigated using an advanced technique called the ultrasonic pulse velocity (UPV) test. Furthermore, a simple mathematical model was proposed based on the experimental results to help engineers design the stabilization plan and timely decide about the next steps of the construction process. [ABSTRACT FROM AUTHOR]

Plate anchors have great advantages that are useful in deep or ultradeep water mooring systems. The keying behaviors have a deep effect on the embedment loss and pullout capacity of strip plate anchors. In this paper, the effect of soil remolding on the keying behaviors of strip plate anchors is studied by large deformation finite-element (LDFE) analysis. First, the LDFE results are compared with centrifugal test results, theoretical solutions, and LDFE data from previous literature, showing good agreement. Then, a series of LDFE cases is studied to investigate the effects of the padeye offset, load eccentricity, soil sensitivity, and initial embedment depth on the embedment loss and pullout capacity of plate anchors during the keying process. The LDFE results show that different load eccentricity corresponds to different soil failure mechanisms, and both padeye offset and soil remolding will reduce the pullout capacity of plate anchors. Finally, an equivalent soil strength is introduced considering rate effect and soil remolding of clay. A combined factor and an equivalent ultimate pullout capacity are used to estimate the ultimate embedment loss and pullout capacity of strip plate anchors in uniform clay, respectively. [ABSTRACT FROM AUTHOR]

Stratum cavity collapse induced by water and sand leakage in a subway tunnel is a sudden urban geological disaster, which can cause serious casualties and economic losses. In response to the hazards of stratum cavity collapse induced by water and sand leakage around subway tunnels, a set of visual test devices with variable hole diameters were designed to simulate the stratum cavity collapse induced by water and sand leakage under comprehensive consideration of the size of the cavity diameter, clay thickness, clay strength, and so on. Based on pressure arch theory and unified strength theory, a critical calculation formula was established for stratum cavity collapse under two modes, of tensile shear and shear failure. Furthermore, the accuracy of the theoretical calculation formula was verified by experiment. The results show that the critical radius increases with the increase of clay strength and decreases with the increase of buried depth and friction angle. Clay soil is more prone to shear failure at the arch foot under the same conditions. The larger the soil sand mix ratio and the cavity diameter, the smaller the critical water pressure of soil collapse. The thicker the soil layer, the greater the critical water pressure. The theoretical analysis method has a clear physical meaning and the theoretical results agree well with the test results. The research results are of great significance for the warning of and prevention of such urban geological disasters. [ABSTRACT FROM AUTHOR]

The piezocone penetration test (CPTu) is a common geotechnical field test to evaluate soil properties. In interpreting the CPTu field measurements, soil drainage conditions are mostly considered completely drained or undrained; however, partial drainage conditions govern for such soils as silts or clayey sand mixtures. Previous studies show that neglecting partial drainage conditions causes incorrect estimation of soil geotechnical parameters. Most studies have been conducted using calibration chambers and centrifuge tests on clayey soils. Due to the complications in modeling the piezocone test, few numerical studies have been performed under partially drained conditions, especially on coarse-grained soils. Among the challenges of numerical modeling of CPTu, one can mention the difficulty of modeling soil structure in large strain mode and soil–water interaction behavior. In this paper, piezocone penetration tests were modeled using the advanced hypoplastic constitutive model and finite-element method. The behavior of Firoozkooh sandy soil under different drainage conditions and relative densities was analyzed. Then, the effect of cone penetration on the surrounding soils was discussed. It was shown that drainage conditions and the soil relative densities significantly affected the trend of variations in excess pore-water pressure (EPWP) generated around the piezocone. [ABSTRACT FROM AUTHOR]

As a common natural phenomenon in clayey soil, drought-induced desiccation cracks impose danger to soil structures by degrading soil mechanical strength and hydraulic properties. In this study, through a series of field tests, we evaluated the effect of microbially induced calcite precipitation (MICP) technology on the suppression of desiccation cracks in field clayey soil and examined the impacts of MICP treatment methods (two-phase and one-phase methods) and cementation solution (CS) concentrations (0.5 and 1.0 M) on soil desiccation cracking behaviors and soil microstructure variation. The results revealed that MICP is capable of suppressing desiccation cracks in field soil. The surface crack ratio, average crack width, total crack length, and average crack depth decreased with the increase of treatment cycles and CS concentration. The two-phase MICP method performed better on soil crack suppression than the one-phase MICP method. Further CaCO3 distribution and soil microstructure characterizations indicated that the CaCO3 crystals generated by the MICP process contributed dominantly to the soil crack suppression by filling crack space, bonding soil particles, and reducing soil water evaporation. This study demonstrates that MICP is expected to serve as an eco-friendly and sustainable technology for soil desiccation crack suppression at the field scale. [ABSTRACT FROM AUTHOR]

Foam lightweight soil (FLS) has been widely used in geotechnical engineering because of their high strength, low density, and thermal insulation. However, few scholars have researched its application to subgrade engineering, especially roadbed widening. In this case, this special artificial soil can significantly reduce the differential settlement of subgrades due to its lightweight and high strength. In the research background, a series of laboratory experiments were conducted to investigate the effects of mixing ratio and fibers on the physical, mechanical, and microporous structural properties of clay-based foamed lightweight soils (CFLS), with clay and cement as the main raw materials. The experimental results indicate that preparing CFLS for road widening using clay soils from around highways as raw materials is an alternative treatment method. During the application process, one should select the optimal mixing ratio and fiber content considering the fluidity, stability, and mechanical strength of CFLS. In addition, the dynamic modulus of elasticity and cumulative plastic strain of CFLS samples also indicate that CFLS has superior dynamic properties compared with cohesive soils and can meet the criteria for road construction. [ABSTRACT FROM AUTHOR]

This document discusses a research paper that explores the use of alternative binders to ordinary portland cement (OPC) in soil stabilization. The authors conducted a study using a binder composed of ground-granulated blast furnace slag (GGBS) and carbide sludge (CS) to stabilize clayey slurries. They found that the GGBS-CS binder performed better than OPC and proposed a pH-based approach to predict the optimum CS content. The document provides information on the unit weight of different materials, calculation of soil mass, and determination of GGBS and CS masses. It also presents data on the unconfined compressive strength (UCS) of different types of soil and suggests using a normalization procedure to fit the data to a single equation. The authors' experimental procedures are also questioned. [Extracted from the article]

Earth pressure balance (EPB) shield tunneling in coastal silty clay strata often faces the problems of clogging on the screw conveyor or the belt conveyor due to lumps of clay soils formed because of the large cohesion of clay particles. Soil conditioning using common foaming agents is not enough to alleviate the problem. Therefore, the novel dispersed foaming agent was studied in this work using performance and orthogonal compound tests. The foam microstructure was observed using an electron microscope to analyze the evolution mechanism of bubbles for different additives. Both laboratory and in situ tests were carried out to assess the effectiveness of the novel dispersed foaming agents. The testing results showed that 50 vol.% is an optimum foaming injection ratio to improve rheological properties and undrained shear strength of silty clay to avoid the unnecessary waste of conditioning materials. The half-life time (T1/2) and foam expansion ratio (FER) of novel foaming agents using the formation ionic solution as the solvent increased due to existing hydrophilic polar groups based on undisturbed soil samples taken from a Xiamen Metro construction site. It was shown that acids, alkalis, and salt ions had little effect on the FER and T1/2 of foaming agents (Foams A and B) using the macromolecular dispersant. The variations in the plasticity index were similar to those of the liquid limit for the muck conditioned using dispersed foaming agents with sodium citrate, sodium bicarbonate, and sodium chloride at a concentration of 0.1 wt%. Sodium bicarbonate had the most significant impact on the foaming agents' anticlay effect. Compared with commercial and house-made foaming agents of the Fuzhou Metro project, the muck was effectively conditioned by Foams A and B based on the slump and temperature values. In addition, the average cutter-head torque was reduced by about 250 kN·m. The amount of foaming agents used was reduced by about 18.6% and 12.9% on average in the two testing sites, respectively. [ABSTRACT FROM AUTHOR]

Pore-size distribution (PSD) of soil is a fundamental property that determines flows of water, heat, chemicals, and electricity and controls distributions of stress and deformation. PSD can be intrinsically related to the soil–water retention curve (SWRC), which is a constitutive relationship describing how the soil skeleton retains pore water via adsorption and capillarity. A general framework to quantify soil's PSD is proposed by first fitting an analytical SWRC model to experimental water retention curves that explicitly separate the SWRC into an adsorptive SWRC and a capillary SWRC. The PSD is then estimated at incremental steps by combining the capillary SWRC and the conventional Young–Laplace equation relating capillary pressure to pore size. Cumulative and density PSD curves for 11 soils covering a wide spectrum of soil types are determined and compared with the PSD functions independently measured using mercury intrusion porosimetry (MIP). Good agreement is observed in the estimated pore size range, distribution pattern, and peak position determined from the two different methods. Differences observed in the methods are attributed to differences inherent in the use of wetting and nonwetting fluids to probe the pore space. The SWRC-based method generally characterizes pore sizes ranging from 100 to 0.02 μm with a major peak located within a pore diameter range of 1–10 μm. As the clay content increases, a secondary peak becomes evident at smaller pore sizes (about 0.01–0.1 μm), where the bimodal pattern reflects the dual-porosity microstructure commonly observed for clayey soils. For soils containing swelling clays, PSD can change substantially with variation in water content; thus, the water-based method is more appropriate than MIP for applications to geotechnical engineering practice. [ABSTRACT FROM AUTHOR]

Interactions between adjacent piled-raft foundations may induce additional settlement and cause the tilt of the structure. This case study investigates the long-term performance of a large piled-raft foundation system supporting high and heavy alumina solution storage tanks based on field measurements and three-dimensional (3D) numerical simulations. To properly consider the interactions among rafts, piles, and soils; the elastoplastic behavior of clayey and sandy soils; and the consolidation behavior of soil after construction, a 3D finite-difference code was utilized for the numerical modeling. Two undrained mechanical analyses were conducted to simulate the installation of foundations/tanks and the filling of alumina solution into the tanks, while two coupled hydromechanical analyses were performed to model the period between the two undrained stages and the stage after tank filling, respectively. The predictive capability of the numerical model was checked by comparing the simulation results first with single pile load test data and then with in situ settlement measurements at different locations of the piled-raft foundations. The long-term behavior of the piled-raft foundations was further investigated by analyzing various aspects including the axial force variation along the pile at different locations, the time-settlement relation at monitoring locations, the vertical effective stress increment and displacement of soil, and the differential settlement between monitoring locations. Based on the simulations, the tilt of the platform was mainly due to the superposition of additional stresses near the centerline of the two rows of piled-raft foundations. Finally, parametric studies were conducted to investigate the interactions among the piled-raft foundations at different pile length configurations. The results show that by properly increasing the length of the piles near the centerline of the two rows of piled-raft foundations, the differential settlement of the platforms can be mitigated. [ABSTRACT FROM AUTHOR]

The use of bacteria-based self-healing concrete for substructures in ground conditions is an area of increasing interest for enhancing the durability and longevity of infrastructure. In line with this objective, the present study investigates the bio-self-healing performance of a cementitious material embedded in clay soil with varying chemical exposures and water saturation regimes. Laboratory experiments were conducted on pre-cracked mortar specimens with Bacillus subtilis encapsulated in perlite. The specimens were incubated in the soil with different pH and sulphate levels, representing three exposure classes (based on Eurocodes). The crack healing ratio was evaluated through visual inspection and capillary-water absorption—before and after soil incubation. Findings showed that all inoculated specimens exhibited healing ratios noticeably larger than those of the control specimens, which mainly experienced small autogenous healing. Of note, the best healing performance was observed when the soil was fully saturated and pH-neutral. From the design perspective of bio-concrete, this study emphasizes the consideration of groundwater regime as well as acidity and sulphate of the soil. [ABSTRACT FROM AUTHOR]

This document serves as a follow-up to a previous paper on the use of lime and rice husk ash (RHA) to stabilize clayey soil. The original paper found that the addition of lime and RHA increased the strength of the soil, with the highest strength observed in samples containing 7% lime and 12% RHA. The document also includes additional research studies that support the use of RHA to improve soil strength. These studies found that the inclusion of RHA increased the California Bearing Ratio (CBR) and Unconfined Compressive Strength (UCS) values of the soil, with the maximum strength achieved at an optimal RHA content. The increase in strength was attributed to the formation of cementitious products and agglomeration of soil particles. The degree of strength development varied depending on the type of soil and RHA used. The article also suggests future research directions, such as considering the effect of dry density and evaluating the suction effect. [Extracted from the article]

This document is a discussion of a research paper titled "Probing the Stochastic Unconfined Compressive Strength of Lime–RHA Mix Treated Clayey Soil." The paper explores the use of lime and rice husk ash as binders to stabilize clayey soil. The authors conducted tests to measure the unconfined compressive strength of soil-binder specimens with varying amounts of rice husk ash and lime. They used artificial neural networks and Gaussian process regression to analyze and predict the data. The discussers raise questions about the influence of suction on the strength of the blends and the effect of dry density, suggesting further evaluation of these factors. [Extracted from the article]

In addition to creating environmental threats, the leakage and entrance of chemical fertilizers into soil, which is possible in various ways, dramatically changes the physical and mechanical properties of soil. Furthermore, clay soils in the vicinity of monoammonium phosphate (MAP) contamination show substantially negative behavior, thus, improving the engineering geological factors of soil has become a huge challenge for engineers. Extensive programs such as triaxial compression test, consolidation test, compaction test, Atterberg limits, and collapse tests, in addition to X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) were performed on samples containing 10%–30% MAP over 7 days, 1, and 3 months. The mentioned trend was repeated when 0.5%–3% nano A (Al2O3 in alpha phase), nano F (Fe2O3 in alpha phase), and AF in form of a nanohybrid were added to soil which had been contaminated by MAP. Gained reports demonstrated significant declines in maximum dry density, plasticity index, and shear strength of contaminated soil when compared with natural soil. Conversely, increases in liquid limit, plastic limit, consolidation settlement, as well as soil collapse index were observed. Furthermore, a decrease in the amount of minerals in the XRD results and the formation of a flocculated structure in the SEM images in MAP-contaminated soil are evident. According to microstructural analysis, adding nano A, nano F, and AF nanohybrid as an improvement phase caused remediation of the soil structure and created cementation bonds between soil particles, thereby increasing the maximum dry density and soil shear strength, and decreasing the consolidation settlement and soil collapse index. Therefore, the use of AF as an efficient additive to remediate physical and mechanical properties of soils that have been contaminated with MAP, and to decrease the geological hazards of these kinds of contamination is recommended. [ABSTRACT FROM AUTHOR]

In this paper, a constitutive model is presented to model the behavior of various soils (sand and clay) in different loading conditions and the minimum required parameters are obtained. Although some practical features (concepts) of the bounding surface framework and modified Cam-Clay have been employed in its formulations, the model is developed mainly based on the generalized plasticity framework. Moreover, some concepts such as dilatancy relation and loading history surface are redefined. Finally, the proposed constitutive model is evaluated using the experimental data related to two different sandy soils and three different clays under different loading conditions. Finally, it is concluded that the proposed constitutive model can easily be calibrated for various clayey and sandy soils. It can depict different behavioral aspects of these soils under different monotonic and cyclic loading conditions. [ABSTRACT FROM AUTHOR]

In nature, expansive soil is generally in a state of swelling during rainfall, and its soil–water characteristic curve (SWCC) exhibits a three-dimensional space shape under the action of an increasing void ratio. In this study, expansive soil from Hefei, China, was used. SWCC and hygroscopic tests were performed. A three-dimensional hygroscopic swelling mathematical model of the dry density–void ratio–saturation degree was constructed based on the volume change behavior of expansive soils resulting from the hygroscopic test. In addition, depending on the variation in suction with the saturation degree of expansive soil under different values of dry densities, an SWCC mathematical model considering the swelling effect was constructed. The three-dimensional surface model of the hygroscopic swelling of the expansive soil was steeper in the lower saturation degree area. As the saturation degree increased, the three-dimensional surface gradually became flat. The SWCC model of the expansive soil under the action of swelling in a three-dimensional space is an S-shaped surface. The model exhibited dynamic changes in the suction and saturation degrees as the dry density of the soil decreased continuously. The model comprehensively revealed the hydraulic and swelling properties of expansive soil. [ABSTRACT FROM AUTHOR]

New ways to apply sustainable materials, such as biomass components, are essential for reducing dependence on fossil fuels. This work investigated the engineering properties of unsaturated expansive subgrade soils stabilized by bio-based energy coproducts containing lignin. Lignin is a waste by-product of the paper and pulp industry that is frequently burned. Highway subgrade could consume lignin as an environmentally benign, low-cost, and energy-efficient chemical substance for soil stabilization. Swell and shrink behavior of expansive subgrade soils complicates highway construction and causes damage to existing highways. However, research on the hydromechanical properties and volume change behavior of lignin-stabilized expansive soil is limited, and better insight is required into its unsaturated behavior for safe and economical pavement design practices. In this research, a series of geotechnical laboratory tests were conducted to characterize expansive subgrade soils treated with lignin by determining the Atterberg limits, compaction and consolidation behaviors, swelling characteristics, and water retention properties. The mechanisms influencing the changes in engineering properties of lignin-treated expansive soils were further investigated using soil pH, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy analysis. The study shows that the optimal lignin content contributed to an acceptable degree of soil stabilization. The lignin-based cementing material effectively bonds soil particles together and fills pores, thereby preventing water infiltration into the soil and reducing the swell–shrink potential of stabilized soils. [ABSTRACT FROM AUTHOR]

Expansive soils are extremely susceptible to swelling and shrinkage associated with seasonal changes in their moisture content. This can cause serious damage to structures constructed on expansive soils. Stabilization using additives is widely used to mitigate the concerns of expansive soils by controlling the changes in volume, thereby increasing the strength and durability of the soils. Multistabilizers, including a low percentage of conventional additives with nonconventional additives, can reduce the costs of stabilization. The performance of the stabilized soil can be enhanced by admixture optimization to ascertain that the agent's ratios are quite adequate to meet the optimal levels of modification. Unfortunately, despite the development of advanced techniques for investigating the stabilization of expansive soil, limited studies are devoted to the optimization of admixture to soils. Hence, in this research, an approach based on rough set theory, a mathematical data mining approach, is presented for multiagent optimization for efficient treatment of expansive soils. The multiadditives used in this study are almond shell ash (ASA), volcanic rock dust (VRD), and portland cement (PC). The differential free swell test, the California bearing ratio test, and the unconfined compressive strength test were applied for assessing the characteristics of the stabilized soil specimens. The obtained results and the confirmatory tests demonstrated that a combination of 20% ASA and 20% VRD with 8% PC provides the optimum results in the properties of expansive soil. The microstructural analysis denoted an enhanced modification of the soil engineering properties. The outcomes of this research confirm that the rough set optimization procedure is highly suitable for application in multiagent optimization for the efficient treatment of expansive soils. [ABSTRACT FROM AUTHOR]

The deep soil mixing (DSM) method is used to improve the mechanical and/or hydraulic properties of soils. The DSM method refers to an in situ mixing of soil, water, and hydraulic binder without excavation. After describing the specific microstructure of DSM materials compared with soils or concrete, four porosity–permeability analytical models from literature and based on microstructural parameters (i.e., porosity and pore-size distribution derived from mercury intrusion porosimetry) were applied to predict the water permeability (K) of soil–cement mixtures. After comparing the estimated permeabilities (Kest) with the experimental measurements of such a parameter (Kexp) using a triaxial cell, an indicator parameter A (=Kest/Kexp) was proposed to evaluate the ability of each model to fit the water circulation in DSM material. By calculating the average ratio 〈A〉 from the 24 materials in the studied database, three of the four applied models satisfactorily estimated the water permeability of the studied DSM materials. To reach an 〈A〉 value closer to 1, an extension of the Aït-Mokhtar's model, initially developed for cementitious mortars, was proposed by considering the specificities of the DSM materials. If previous models used only the contribution of nanopores less than 100 nm to the water flow, the extended model considered the contribution of all pore populations in the permeability calculation. Such an approach resulted in a significant improvement in the matching between the calculated and measured permeabilities. [ABSTRACT FROM AUTHOR]

A method for an a priori estimation of the frost heave ratio for clayey soils, considering the degree of their water saturation upon a closed system of freezing, is proposed. The proposed approach involves the introduction of a new parameter in the mechanics of frozen soils, namely, the frost heave index of clayey soils, which characterizes the degree of frost heaving of soil relative to the maximum height of the frost heave of soil that is fully saturated with water. An introduced parameter is used in the final formula to estimate the frost heave ratio of clayey soils. Laboratory experiments were performed to determine the height of frost heaving of clayey soils with a variation in their moisture and porosity to verify the proposed approach. A comparison of the experimental and calculated results showed a suitable convergence sufficient for the practical use of the formula to determine the frost heave ratio in a closed system of freezing. An example of a calculation to justify antiheaving measures using the proposed estimation of the frost heave ratio is given. [ABSTRACT FROM AUTHOR]

Freeze–thaw cycles can deteriorate the expansive soil performance. Phase change materials (PCMs) absorb and store heavy latent heat from the environment, which can be utilized to mitigate freeze–thaw deteriorations in expansive soil. In this study, an environmentally friendly paraffin-based PCM was selected, which included two different forms: liquid (pPCM) and microcapsules (mPCM). The volume change, mechanical properties, thermal properties, and microstructure of the improved soil were studied. These results showed that PCMs can release considerable thermal energy during phase transitions, which improves the thermal stability of the soil. The pPCM enhanced the plasticity of soil and prevented brittle failure; mPCM reduced the damage to the soil microstructure caused by freeze–thaw cycles. Macroscopically, it weakened the swell–shrink behavior and limited the degradation of the resilient modulus, unconfined compressive strength, and failure strain of expansive soil. The optimal PCM content was determined based on the mechanical and thermal properties of the improved soil. This study provides a new idea for the engineering treatment of expansive soil in cold regions. [ABSTRACT FROM AUTHOR]

Monopiles, which have been most extensively used in the offshore wind industries, are usually subject to threats from local scour. The effects of local scour on the bearing capacity of monopiles have been studied based on deterministic soil properties and local scour dimensions. However, the properties of the seabed soil and the dimensions of the local scour both have uncertainty. In this study, a new nonstationary random field model, which can better simulate the nonstationary characteristics of the seabed clayey soil and result in a safer probabilistic design of foundations, is proposed to characterize the spatial variability of the seabed clayey soil. Then, the effects of the spatial variability of the seabed clayey soil and the uncertainty of the local scour depth on the bearing capacity of monopiles are investigated under both uniaxial loading and vertical-horizontal-moment (VHM) combined loading using the random finite-element method combined with kriging metamodeling technique and Monte Carlo simulation. The undrained shear strength of the seabed clayey soil was simulated with a lognormally distributed nonstationary random field, and the local scour depth was treated as a uniform random variable. The negative correlation between them was also considered. The results show that the factor of safety required for the local scoured seabed decreased from 3.3 to 2.6 as the negative correlation was enhanced, greater than or equal to that [factor of safety (FS)=2.6 ] for the intact seabed. The procedure of analyzing the design failure envelop of a monopile in spatially variable clayey soil with a local scour proposed in this study can provide a reference for geotechnical engineers. [ABSTRACT FROM AUTHOR]

In the literature, the influence of spatial variability of the undrained shear strength of foundation soils on the bearing capacity of footings is limited to footings seated directly on the foundation. This is an unlikely arrangement in practice. This paper revisits the footing problem by considering a thin granular layer between a strip footing and soft foundation soil using analytical and stochastic numerical modeling. The analyses are extended to the case of a geosynthetic-reinforced granular layer and to the idealized case of no granular layer. The study shows that the probability that the ultimate bearing capacity for the footing is smaller than the deterministic design value is greater for all three scenarios with randomly uniform clay soil than for the same soil with isotropic or anisotropic spatial variability of strength at practical levels of reliability index β (e.g., β≥3.09 for a permanent footing). The reason for this outcome, which may appear counterintuitive, is explained. Design charts are provided to estimate the deterministic design bearing capacity of a rigid strip footing required to meet a range of target reliability index for the three footing scenarios examined in this study. [ABSTRACT FROM AUTHOR]

Cement composite soil is a more stabilized method in expansive soil foundation projects, but it is essential to find an ecofriendly modification material to reduce the content of cement and its pollution for the environment. A series of unconsolidated–undrained (UU) triaxial tests were conducted to investigate the modification effect of graphene oxide (GO) on cement-stabilized expansive soil (CS), and the contents of GO were 0.05%, 0.1%, 0.15%, and 0.2%, respectively. The test results show that (1) the deviatoric stress–strain curves of CS gradually change from a weakly softening type to a strongly softening one after adding GO. (2) The compressive strength, shear strength, and toughness of GO-modified cement-stabilized expansive soil are better than CS, and the optimal GO content is 0.05%. (3) Microscopic tests show that GO can promote the hydration reaction of cement and reduce the internal pores of CS. Consequently, the mechanical properties and microstructure of CS can be significantly improved after adding GO, and it is feasible to replace a part of the cement with GO in expansive soil foundation projects. [ABSTRACT FROM AUTHOR]

The low bearing capacity of expansive soils often results in serviceability issues and premature failures of infrastructure built upon them. Various studies have demonstrated the use of different soil treatment methods using mechanical or chemical approaches to stabilize the weak ground as a precaution. Most of the reported studies are limited to either lab-based investigations or field monitoring works without the scientific connection between theory and translation. This study aims to verify the field application of a novel soil stabilization method by conducting laboratory-controlled experiments and field performance testing as verification. Enzyme–based soil stabilization was adopted for in-situ clay soil in combination with ordinary portland cement as a sustainable stabilization approach. Soil samples were collected at different regions from the field to evaluate the effectiveness and the mechanism of soil stabilization in the field by the means of replicating stabilization at the laboratory scale using identical mixing proportions of the additives. The mechanical behavior of stabilized soil was assessed through the unconfined compression strength and California bearing ratio test methods. In addition, the changes in the chemical composition of the soil due to the additives were evaluated through the X-ray diffraction testing technique and microporosity test using 2D images translated to 3D profiles from X-ray micro CT tomography. The efficacy of field stabilization was evaluated by conducting the falling weight deflectometer test in the stabilized site. Results from the study are useful to understand the efficacy of field soil stabilization and enhance the reliability of enzyme–based stabilization in practice. [ABSTRACT FROM AUTHOR]

The present work aims to evaluate expansive soil stabilization using different additives. Twenty soil mixtures consisting of 10%, 20%, 25%, and 30% zeolitic tuff (ZT) with 2%, 4%, and 6% lime in various combinations were used to stabilize the soil for pavement subbase application. A comprehensive test program, including Atterberg's limits, compaction, unconfined compression strength (UCS), California Bearing Ratio (CBR), resilient modulus, and permanent deformation, was performed on natural and stabilized soil specimens. Scanning electron microscopy (SEM) supplied with energy-dispersive X-ray spectroscopy (SEM/EDX) was used to confirm the study findings. Adding ZT increases the availability of the silica and alumina needed for the pozzolanic reaction; test results revealed that adding ZT increases the maximum dry unit weight, CBR, UCS, resilient modulus, decreases plasticity, and permanent deformation. As such, ZT can improve the physical and mechanical properties of lime-stabilized soil as a pavement's subgrade and subbase layers. [ABSTRACT FROM AUTHOR]

Temperature significantly affects the mechanical properties of geomaterials, particularly the creep behavior of soft clayey soils. Thus, an appropriate constitutive model to describe the time-dependent stress-strain behavior of clayey soils at various temperatures is necessary. This study performed temperature-controlled oedometer tests on two clayey soils: Hong Kong marine deposit (HKMD) and kaolinite clay (kaolin). The thermally-induced strain and creep strain rates under different temperature paths were investigated and discussed. A novel one-dimensional (1D) thermal elastic viscoplastic (TEVP) model was developed based on an existing 1D elasto viscoplastic (EVP) model. In the proposed model, the viscoplastic strain rate of soils can be described using three state variables: effective stress, strain, and temperature. The proposed model can be conveniently implemented in creep analysis with the equivalent time concept. The prediction results of the TEVP model were consistent with the experimental data for HKMD and kaolin. [ABSTRACT FROM AUTHOR]

A soil water unit weight of 9.8 kN/m3 has been universally considered to quantify soil volumetric phase properties such as void ratio and degree of saturation, but has been found to greatly vary depending on soil type and the volume scale with which it is defined. Recent experimental and theoretical evidence has indicated that the unit weight of soil water can be significantly greater than 9.8 kN/m3 for clayey soils when gravimetric water content is less than 30%. A soil water unit weight as high as 18.8 kN/m3 is evident for some expansive soils at low water content. The significance of abnormally high water unit weight in quantifying soil phase volumes, saturation, and void ratio was experimentally assessed for various clayey soils and theoretically interpreted as a function of water content and soil type. For clayey soils with low liquid limit, average soil water unit weight can be as high as 12.5 kN/m3 for gravimetric water content less than 10%. This leads to an overestimation of liquid-phase saturation and void ratio by as much as 8% if a soil water unit weight of 9.8 kN/m3 is used. For clayey soil with a high liquid limit, the average soil water unit weight can be as high as 18.8 kN/m3 for water content less than 18%, leading to overestimation of liquid-phase saturation by as much as 36% and void ratio by as much as 20% if 9.8 kN/m3 is used. Charts were developed to estimate average soil water unit weight as a function of soil specific surface area and water content, and as a function of liquid limit and water content. The commonly used value of 9.8 kN/m3 for water unit weight can lead to significant errors in estimating phase volumes, void ratio, and saturation for clayey soils. [ABSTRACT FROM AUTHOR]

Singapore has a relatively high water table. When liquefied natural gas (LNG) storage systems are built in soils below the water table in Singapore, the engineering properties of the surrounding soils could be improved through cement stabilization. Due to the extremely low temperature (T) of LNG (approximately −162°C), the effect of ultralow T on the physical and mechanical properties of cement-stabilized soil in case of accidental LNG leakage should be investigated. However, existing studies on cement-stabilized soils are limited to T above −20°C. Therefore, in this study laboratory experiments to quantify volumetric expansion, unconfined compressive strength (UCS), and Young's modulus (E) of cement-stabilized soils at −40°C, −80°C, and −120°C were conducted. The experimental results indicated that the stabilized soils' volumetric expansion reached ≤2.6% at −120°C. The UCS and E of the stabilized soils increased from 0.9 to 27.6 MPa and from 99.8 to 2,669 MPa, respectively, and the T decreased from 24°C to −120°C. In summary, the ultralow T induced limited volumetric expansion (<3%) for cement-stabilized soil and significantly increased its strength and E, which indicated that cement soil stabilization could be beneficial for underground LNG storage systems in Singapore when exposed to accidental LNG leakage. [ABSTRACT FROM AUTHOR]

In this paper, a modified/extended rotational hardening (RH) rule is applied to the nonassociated simple anisotropic constitutive model, SANICLAY-D, for clayey soils. In the proposed model, the destructuration mechanism, as well as zero and nonzero fabric anisotropy at critical state (CS), are considered. A detailed model formulation with the RH rule that yields a unique CS in the e-ln(p′) space is presented including an appropriate form of the relatively simple substepping integration algorithm. In addition, the model is implemented into ABAQUS finite-element software using a User-defined Material (UMAT) subroutine and used in the simulation of various experimental tests. The modified SANICLAY-D model (SANICLAY-MD) is meticulously calibrated step by step for Saint-Alban sensitive soft clay. Drained and undrained triaxial tests after various consolidation paths as well as the direct simple shear (DSS) test are simulated for Saint-Alban and Bothkennar clays as a boundary value problem. Simulation results approve the SANICLAY-MD model's performance in the prediction of the natural soil behavior. Results show that neglecting the effect of fabric anisotropy at CS and destructuration of natural clays can lead to inaccurate prediction in the constitutive modeling of intact soft soils. [ABSTRACT FROM AUTHOR]

This study investigated the different geotechnical characteristics of soil stabilization with the addition of lime and rice husk ash (RHA) in varying amounts (3%, 5%, 7%, and 9% lime, and 4%, 8%, 12%, and 16% RHA). A series of compaction, unconfined compressive strength (UCS), California bearing ratio (CBR), pH, and X-ray diffraction (XRD) tests were performed in the laboratory to assess the impact of the considered admixtures on the stabilized soil parameters. This study also proposes the successful integration of an artificial neural network (ANN) and a Gaussian process regression (GPR) with the experimental UCS observations. The lime concentration, RHA concentration, and curing period were considered as the input parameters, and UCS was considered as the response. The proposed framework was extended to analyze the compressive behavior of treated soil on the minuscule level. Such coupled machine learning-based experimental investigation can provide deep insight into the soil behavior which otherwise would have remained unexplored due to the prohibitive nature of performing laboratory experiments on a large scale. The findings demonstrated the effectiveness of RHA in addition to lime in stabilizing the considered expansive soil. With the addition of lime and RHA mix, the UCS and CBR values of the treated soil increased significantly. [ABSTRACT FROM AUTHOR]

Curing temperature and curing mode could affect the mechanical properties of cement-stabilized soil, which is of both scientific and practical importance for cement mixing performance. This paper aims to present the strength development of cemented soil cured in a water and 95% relative humidity (RH) environment with a series of curing temperatures (T) based on laboratory tests and model characterization. The base soil was low-liquid-limit organic clay (OL) classified by the Unified Soil Classification System (USCS). Unconfined compression (UC) testing was conducted in this study, and a combination of Fourier transform infrared spectroscopy (FTIR), scanning electronic microscopy (SEM), and energy-dispersive spectroscopy (EDS) was used to further investigate the microcharacteristics of the stabilized specimens. Results showed that the unconfined compressive strength (UCS or qu) of cemented soil increased with the increment of temperatures T both at early (7 days) and long-term (90 days) curing periods. Nevertheless, the cemented soil cured in 95% RH mode constantly achieved higher strength compared with that cured in water. The qu of 28 and 90 days gained in 95% RH mode can be taken as 1.2–1.5 times and 1.4–2.0 times of that in the water bath. In addition, the crossover effect was observed in samples cured in water when T reached 80°C, which was verified by the decalcification of calcium silicate hydrates (C-S-H) formed inside cemented soil through microtests. Based on the observations, a modified hyperbolic model characterizing the strength development of samples was proposed, in which the effects of curing temperature and curing time could both be considered regardless of the crossover effect. Moreover, the failure pattern of samples under different curing conditions was also analyzed. The findings presented in the current study are expected to provide insights and references for cement mixing engineering design. [ABSTRACT FROM AUTHOR]

The performance of the novel fish anchor has been assessed through field tests. The tests were carried out at three different locations in the Swan River, Perth. The water depths were 2.91–4.73 m. The riverbed soils consisted of clay (Location 1), silty clay (Location 2) and silt (Location 3). The anchor was installed in the riverbed by dropping first through an air column followed by a water column, and finally striking the riverbed at an impact velocity of 10.4 (Location 1), 11.43 (Location 2), 11.72 (Location 3) m/s. The anchor tip embedment depth in the riverbed was measured at 1–2.5 times the anchor length. For similar impact velocity, the tip embedment depth in clay was 1.56–1.68 and 2–2.1 times of that in silty clay and silt, respectively. The capacity was found to reduce with loading angle at the padeye to the horizontal. The ultimate capacity was 1.5–2.6 times the weight of the anchor submerged in water for loading angle 90°, which increased to 8.2–15.6 times the weight for θ0=∼16°. The fish anchor dove, as opposed to pull out of the riverbed, for loading angles ≤37–47° , resulting in nonelliptical failure envelopes, which have been expressed mathematically. [ABSTRACT FROM AUTHOR]

This paper presents an iterative horizontal method of slices (iterative HMS) for the global stability analysis of a slurry trench in layered cohesive-frictional soils. The iterative HMS differs from existing HMS models in terms of the assumptions on interslice forces. Preceding HMS techniques postulate that normal interslice forces can be evaluated from overburden pressures, which can lead to the violation of failure criteria along interslice boundaries. The iterative HMS ensures that a limit equilibrium system is established without violating the failure criterion throughout the entire soil mass. This is achieved by iteratively adjusting interslice forces by means of enforcing the failure criterion for the aforementioned problematic slice boundaries violating the failure conditions. The performance of the iterative HMS is evaluated in example problems of a slurry trench in uniform clayey soils and cohesive-frictional strata. The results are compared against solutions obtained using finite-element limit analysis (FELA) and a shear strength reduction FEM (SSRFEM). This comparative analysis shows that the adjustment in interslice forces is important for reasonably assessing trench stability conditions. A parametric analysis is performed by using the iterative HMS to show under what trench construction parameters the adjustment of interslice forces cannot be neglected in the stability analysis of a slurry trench. [ABSTRACT FROM AUTHOR]

Soils above the groundwater table and near the ground surface are often partially saturated, and the changes in the degree of saturation and matric suction caused by infiltration may have substantial effects on the stability of geotechnical systems. This work evaluates the significant effect of transient flow on the ultimate bearing capacity of strip footings founded on unsaturated soils under the simultaneous actions of vertical and horizontal loads and moment using the lower-bound theorems of the finite-element limit analysis and the incorporation of second-order cone programming. The unified effective stress theory is incorporated into the soil yield function to model the partially saturated state, and the closed-form solution for one-dimensional transient flow is adopted so as to evaluate the tempo-spatial variations of suction stress. For both sand and clay underlying soils, it is found that the increase of infiltration time leads to a notable decrease of the size of the normalized failure envelopes for either obliquely or eccentrically loaded shallow foundations. The impact of transient flow on the ultimate bearing capacity of surface footings is also observed to be greater for clay soils as compared with sand deposits due to the significant contribution of higher induced suction stress. [ABSTRACT FROM AUTHOR]

Clay–sand mixtures are deposited worldwide, such as naturally sedimentary soils and dredged clays in human activities. These mixtures usually have a fine fraction above the transitional fine content, and the compressibility is dominated by clay matrix and affected by sand fraction. In this paper, an explicit equivalent compression curve is proposed for clay–sand mixtures. This is done by directly incorporating the equivalent void ratio into the intrinsic compression model of the clay matrix. The roles of initial and evolving soil structure developed during the compression process are described by a structural variable, which can be directly computed from the experimental data. Experimental data compiled from various literature are used for evaluating the accuracy of the suggested model. They indicate that the proposed relationship of stress versus equivalent void ratio is simple yet effective to evaluate the compressibility of clay–sand mixtures with a wide spectrum of sand fraction. The model is also practically useful for estimating the compressibility of other gap-graded soils, such as clay–gravel mixtures. The proposed stress versus equivalent void-ratio equation is an elementary function and can be readily implemented into general elastoplastic models. [ABSTRACT FROM AUTHOR]

This paper discusses the second-order reliability-based design optimization (SORBDO) of unsaturated finite slopes. An efficient search algorithm is proposed to locate the most probable slip surfaces using the Morgenstern–Price method of slices. The variability of fitting parameters of the soil water characteristic curve (SWCC) and shear strength parameters have been taken into account for evaluating the reliability of unsaturated finite slopes. Six unsaturated shear strength (USS) models are considered for the analysis of unsaturated soils. The most conservative model for the optimum design of finite slopes is recommended. Moreover, the results indicate that the mean and standard deviation of the fitting parameters of SWCC have a significant effect on the critical centers, critical slip surfaces, and reliability index of the unsaturated finite slopes. The results demonstrate a significant change in the critical centers associated with critical slip surfaces due to the change in the mean and coefficient of variation of the fitting parameters of SWCC. Statistical analysis of the experimental data shows that a positive correlation exists between fitting parameters of SWCC related to air entry value (af) and residual water content (mf). Negative correlations are found between the fitting parameters of SWCC related to air entry value (af) and slope (nf). Similarly, the SWCC fitting parameters related to residual water content (mf) and slope (nf) have negative correlations for clayey soils. It is observed that the correlated value of the reliability index is overestimated with reference to the uncorrelated value for clayey soil slopes. The proposed design charts are beneficial for engineers and practitioners for the sustainable design of unsaturated finite slopes. Overall, the developed rigorous SORBDO framework offers a more rational approach for assessing critical failure surfaces and critical centers, considering the interdependency of random variables. [ABSTRACT FROM AUTHOR]

Several widely used field methods for estimating postliquefaction ground deformation are based on the laboratory data from one series of cyclic simple shear tests performed on one uniform clean sand reconstituted to three relative densities. It is not clear if the trends of this one data set are applicable to other clean sands, nonplastic silty sands, and nonplastic silts. A database of 579 test results on postliquefaction volumetric strain, including 299 test results that relate maximum shear strain to the factor of safety against liquefaction triggering, was compiled and used to examine trends for these soils. The database includes postcyclic test data on 10 clean sands, 2 gravels, 3 silty sands, 5 silts, and 3 clayey soils. The enlarged cyclic testing database was used to develop models that estimate postliquefaction volumetric strain and maximum shear strain as a function of soil type, state, and seismic demand. The models are applicable to uniform nonplastic soil. The state parameter was used in addition to relative density and void ratio to characterize the state of the soil. Correlations between these parameters enable the full data set to inform the models. [ABSTRACT FROM AUTHOR]

In this paper, the compressive and tensile ultimate bearing capacity of helical piles, in the load range required for designing 63-kV transmission towers, are studied by conducting analytical and numerical investigations. In this light, an explicit easy-to-use analytical framework was developed by considering the unsaturated soil condition that was validated against experimental records. Also, finite-element models were constructed for fully saturated and fully dry soil conditions. Then, to validate the analytical and numerical solutions in fully saturated and fully dry soil conditions, three compressive and one tensile field tests were carried out, and the results were compared quantitatively with analytical and numerical calculations. Comparative studies showed that the analytical, numerical, and experimental results have a high level of conformity. In accordance with the load ranges of transmission towers, analytical parametric studies were conducted for different geometrical aspects of the helical piles in different soils. Also, for two typical unsaturated sand and clay soils, the ultimate load of helical piles was calculated versus matric suction. Moreover, a vast numerical parametric study was performed to investigate the role of the geometrical aspects of helical piles and soil characteristics on the load-transfer mechanism and ultimate bearing-capacity values for helical piles driven in sandy and undrained saturated clayey soils. Results showed that the maximum load capacity of helical piles occurred in a matric suction less than that of a fully dry soil. In addition, the soil type and the geometrical aspects of the helical pile were shown to have significant effects on the load–displacement behavior and ultimate bearing-capacity values. [ABSTRACT FROM AUTHOR]

The undrained shear strength (su) and overconsolidation ratio (OCR) of clayey soils are two key parameters that are frequently used in geotechnical engineering practice. In comparison to laboratory tests that are expensive and time-consuming, the fast evaluation of these parameters using the field piezocone penetration test (CPTu) is favorable. The available literature contains a number of correlations that have been suggested by several researchers to estimate the su and OCR from CPTu; however, these correlations were mostly empirical and were constants multiplied by CPTu measurements. In addition, these correlations were site-specific and provided rough estimations of these important parameters. In this paper, the process of a CPTu in clayey soils was modeled via finite-element (FE) formulations, and the predictions for excess pore water pressures (EPWPs) that were generated around the penetrating piezocone were elaborated on and used to develop two new relationships for the estimation of su and OCR from CPTu data. A major advantage of the proposed relationships is that they could be employed using CPTu measurements and no other information from laboratory experiments or calibrations with field benchmarks or reference values may be needed. The utilized simulation procedure and the proposed relationships were compared and validated with the laboratory and field measurements and the existing relationships in the literature. [ABSTRACT FROM AUTHOR]

The drying phenomenon in clays is a multiphysical process accompanied by alterations in the thermal, hydraulic, and mechanical states of the multiphase system. Reversible and irreversible characteristics of shrinkage deformation have been observed experimentally in clayey soils for different ranges of moisture contents. The kinematics of drying due to evaporation and drying-induced shrinkage can be studied by utilizing a coupled thermo-hydro-mechanical (THM) model. An accurate evaluation of drying-induced shrinkage is needed to investigate the thermal cracking and damage of geomaterials. In this study, we developed a thermoporoelastoplastic constitutive framework assuming a non-associative plastic flow rule that can accurately model the transversely isotropic behavior of stiff natural clays in unsaturated conditions. All material parameters used in the non-associative transversely isotropic constitutive model were calibrated based on experimental observations of Boom clay. Then, the capability of the model was assessed by analyzing the convective drying experiment on natural Boom clay. The comparison of the numerical and experimental results confirms the plausibility of the hypotheses made in this study. The results show that the first stage of evaporation ends rapidly and the falling rate period (second stage of evaporation) is the dominant evaporation mechanism due to the intrinsic hydraulic properties of Boom clay and the high evaporative demand of the environment. The developed model reasonably captures the anisotropic elastic and plastic deformations of the clayey soil during the transient drying process. Numerical results demonstrate that drying shrinkage induces a 30% reduction in porosity in which approximately 82% of the total volumetric deformation in drying-induced shrinkage is irrecoverable (i.e., plastic). Moreover, the results indicate that most of the plastic deformation occurs in the first couple of hours of the drying process, when the soil's unsaturated condition is in a funicular state (i.e., where capillary pressure is dominant). Finally, the last section of this paper is devoted to a sensitivity analysis of the THM behavior of Boom clay with respect to its elastic and plastic strength. The parametric study shows approximately 10% more reduction in the final surface shrinkage when the difference between the slopes of the drying-induced compression line and the swelling line (i.e., λ−κ) is doubled. [ABSTRACT FROM AUTHOR]

This paper examines the accuracy of a new elastic–thermoviscoplastic (E-TVP) constitutive model developed based on critical state soil mechanics. The model can be used for simulating the temperature-dependent and strain-rate-dependent behavior of clay soils. The study compares the E-TVP behavior of a single soil element with previously published thermo-mechanical experimental results performed on saturated clay specimens at different temperatures. Suggestions regarding unloading and reloading at constant temperatures as well as thermal consolidation under constant loads are presented. A modification for unloading–reloading adds a new criterion to the volumetric thermoviscoplastic strain rate formulation. A physics-based term is added to the current specific volume of the soil to include the viscous effect induced by temperature change. These modifications improve the convergence of laboratory data and simulated model responses. Comparisons of results from an earlier E-TVP model and the newly improved model provide evidence of improved predictive capabilities. [ABSTRACT FROM AUTHOR]

2(e and g)] to random particle distribution [ HT ht , Fig. The HT ht curves in Fig. In this case, some issues regarding the calculation of HT ht should be clarified. 1(a) presents the variations of thixotropic strength ratio HT ht with time for different types of clay. [Extracted from the article]

In this study, the suction induced by stress release was investigated by measuring the suction of instantaneously unloaded MX80 bentonite specimens after wetting in an oedometer either under different vertical stresses or under a constant-volume condition. Swell-consolidation tests were also performed, and the results were compared with those of specimens wetted under different vertical stresses or a constant-volume condition. The microstructure of the unloaded specimens was investigated using mercury intrusion porosimetry (MIP). The water content and void ratio as well as the degree of saturation of specimens were also determined. Results showed that in the case of limited water exchange between macropores and micropores during stress release, the change in suction was equal to that of stress (−ds/dσv=1). By contrast, with water exchange between macropores and micropores, soil swelling occurred, and the variation of suction was higher than that of stress (−ds/dσv>1). A method was proposed allowing such water exchange between macropores and micropores to be determined (−ds/dσv−modified=1 , where σv−modified is the modified stress considering water exchange), evidencing the macropore drying due to stress release. Comparison of results from MX80 bentonite and other clayey soils showed that when the nonclay (grains such as quartz, calcite, and so on) fraction (NCF) was lower than 35% by mass, NCF had an insignificant effect on −ds/dσv−modified (equal to 1). By contrast, in the case of higher NCF (>35%), −ds/dσv−modified became lower than 1, and the higher the NCF, the lower the −ds/dσv−modified value. These findings provide useful information for better understanding the mechanism involved at the microstructure level in the stress/suction coupling during stress release in clayey soils. [ABSTRACT FROM AUTHOR]

Excavation causes disturbance to the surrounding soil, affecting the soil's mechanical properties. This study presents a case study to investigate the effect of excavation disturbance on soil properties and pile capacity via in situ tests. A series of multifunctional piezocone tests, multichannel analysis of surface wave tests, and electrical resistivity tomography tests were conducted at three sites of the Taihu tunnel region before and after excavation with different depths. The changes in soil mechanical properties and the pile capacity loss were evaluated using the test results. The results indicated that excavation disturbance decreased the cone tip resistance, sleeve friction, soil resistivity, shear wave velocity, and undrained shear strength. In contrast, the friction ratio and the effective friction angle were not affected. The average cone tip resistance of soils in the excavation disturbance zone was approximately 51%, 46%, and 62% of its initial value at Sites A, B, and C, respectively. The variation in soil properties was only observed within a limited depth below the excavation surface, which is defined as the excavation disturbance zone. The piezocone test successfully identified the depth of the excavation disturbance zone, and the disturbance zone height was approximately 0.42 times the excavation depth. In the disturbance zone, the cone tip resistance and the undrained shear strength of the soil decreased linearly from approximately 90%–0% with increasing depth. Because of excavation disturbance, the axial and lateral capacities of a pile beneath the Taihu tunnel were reduced by about 9% and 50%, respectively. [ABSTRACT FROM AUTHOR]

Pore-water pressure in soil is caused by three physically distinguishable sources: ambient (environmental) pressure, surface tension–induced capillary pressure, and the soil's electromagnetic potential–induced adsorptive pressure. The former two form the conventional concept of pore-water pressure, which is considered a constant within a soil-water-air representative elementary volume and can be directly measured by piezometer (under saturated and compressive states) or tensiometer (under unsaturated and tensile states). The third one can be called adsorption-induced pore-water pressure and is localized within a certain distance to the particle surface of soil or intercrystalline surface of swelling clay. The adsorption-induced pore-water pressure is always compressive and dictates the water phase transition in soil by altering water's freezing point, density, and viscosity, among other physical properties. A framework of quantifying the adsorption-induced pore-water distribution via the measured soil water isotherm is presented for any soil type under any given water content. It is demonstrated that the adsorption-induced pore-water pressure can be up to 1.6 GPa in the first few layers of hydration, but will diminish to zero at a distance equivalent to the gravimetric water content >1% for sandy soil and greater than a few percent for silty soil. In clayey soil, the adsorption-induced pore-water pressure can sustain tens of megapascals even at much farther distance, equivalent to ∼30% water content. In expansive clay, the adsorption-induced pore-water pressure inside the crystalline lamellae can exceed 800 MPa. The soil water density functions of a silty soil and a bentonite clay predicted by the proposed framework matched well with that measured independently from the conventional consolidation testing, validating the framework to determine the spatial distribution of the adsorption-induced pore-water pressure in soil. [ABSTRACT FROM AUTHOR]

2 of the original paper" and that "For soils and rocks under undrained condition, HT ht has been proven theoretically to be equal to 0.5 when the Skempton ([22]) HT ht parameter is equal to 1 at fully saturated conditions." For instance, for very stiff clays at high confining pressures, the theoretical HT ht value may barely exceed 0.9 even at fully saturated conditions. The Skempton HT ht parameter depends on both the degree of saturation and the stiffness of the soil skeleton. 1, HT ht is more affected by changes in degree of saturation and confining pressure at small strain conditions compared to large strain conditions (e.g., [10]). [Extracted from the article]

Smart irrigation is one application of digital agriculture that can be used to achieve improved crop yields while saving water and energy. Many variations of smart irrigation can be applied, but there is no consensus among the scientific community as to which method is the best practice. The objective of this research was to evaluate two smart irrigation methods: a soil moisture–based method using sensors and an evapotranspiration- (ET-) based technique. The selected crop was sweet corn. Growth variables (biomass, yield, harvest index, and water productivity) were compared for each of the two methods. Three irrigation regimes were applied for each method: 60%, 90%, and 120% of crop evapotranspiration (ETc) for the ET-based method, and 25%, 30%, and 35% of the total soil moisture for the soil moisture–based method. Corn sap flow was measured in response to the three treatments in the soil moisture–based experiment to measure transpiration. The results showed that the ET-based method is easier to implement with less infrastructure, and it can result in similar yields compared to the soil moisture–based method. Although the fresh yield was 16% higher using the soil moisture–based method, grain yield can be sustained with the ET-based method using 8% less water. Selection of an appropriate irrigation scheduling method should be based on marketable yield: keeping the soil water content near field capacity will result in a higher fresh yield but will not translate into more dry matter. If grain yield is the target, the ET-based method is less expensive and more farmer friendly, but care should be taken to properly estimate irrigation losses to avoid underirrigation. An evaporative stress index (determined using sap flow measurements) of 70% will cause a 22% reduction in fresh sweet corn yield but only a 7% reduction in grain yield. Transpiration peaked when the soil moisture was above 85% of the available water (i.e., at 38% in the calcareous clay soil of the experiment). [ABSTRACT FROM AUTHOR]

Time-dependent response of piled raft foundations (PRFs) in saturated, normally consolidated and moderately overconsolidated clayey soils under the single-drainage condition is investigated using three-dimensional, elastoplastic finite-element (FE) analysis with the modified cam clay (MCC) soil constitutive model. Four different types of clay (Boston Blue Clay, San Francisco Bay Mud, London Clay, and Shanghai Clay) with different values of overconsolidation ratio (OCR) (OCR=1 , 2, and 5) and 20 different configurations of rectangular PRFs are considered for the study. The settlement response and load sharing of PRFs are investigated. Regression analyses are performed with the FE analysis results to obtain fitted equations for immediate settlement, primary consolidation settlement, and degree of consolidation of PRFs. These equations are applicable to PRFs with cast in situ bored piles similar in size to those considered in this study. The proposed equations can be used to estimate time-dependent PRF settlement in normally consolidated and moderately overconsolidated clay as part of preliminary design calculations. [ABSTRACT FROM AUTHOR]