Search

Siliceous minerals of the Dengying Formation in the Gaoshiti–Moxi area in the central Sichuan Basin exhibit four types of quartz crystals (cryptocrystalline quartz, chalcedony, microcrystalline quartz, and megacrystalline quartz) and three structural types: cryptocrystalline, microcrystalline, and mosaic (laminated mosaic, window-hole interrupted mosaic, and arc-laminated mosaic). Siliceous minerals have a great influence on the storage performance of the reservoirs in the Dengying Formation. According to the petrophysical parameters of the Dengying Formation and porosity intersection diagrams, the siliceous dolomite and the reservoirs have low impedance characteristics, which makes it difficult to distinguish between them and leads to difficulties in the characterization and prediction of the reservoirs. The transverse wave velocity is favorable for reservoir characterization. Currently, the main method used to estimate the transverse wave velocity is petrophysical modeling, which establishes a relationship between the elastic and physical parameters of the reservoir. In this paper, the siliceous minerals in the dolomite in the study area are regarded as solid inclusions, and the calculation method of the rock matrix modulus is improved by using solid replacement. Then, an improved petrophysical model is constructed by combining the KT (Kuster–Toksöz) model, the DEM (Discrete Element Method) model, the Gassmann equation, and the Wood equation. The transverse wave velocity is estimated using the improved model under the constraint of the longitudinal wave velocity. The shapes of the transverse wave velocity curves obtained by the improved model and the deviations from the measured velocities are significantly better than those of the Xu–Payne model and other models. The results show that the improved model can effectively estimate the transverse wave velocity of the reservoir in this area, which provides a basis for future reservoir predictions in this area. [ABSTRACT FROM AUTHOR]

In the face of the new reform of China's "unified electricity market", the frequency regulation ancillary service market in each region of China is still divided between using the MCP and PAB pricing mechanisms. The purpose of this paper is to explore the different impact the laws of the above two pricing mechanisms have on the frequency regulation market and to provide relevant suggestions for this electricity market reform. This paper simulates the competitive activities of the frequency regulation market based on the multi-agent simulation model, conducts a comparative experiment by changing the pricing mechanism to a single variable based on the rules of the Sichuan frequency regulation market in China, and concludes that MCP can make the market fast and stable, and that its market settlement price is low, which is suitable for the "unified electricity market". Although PAB makes the market settlement price high, it can ensure the retention of high-performance units in the market, and the stable settlement price makes this model able to accurately reflect the "price signal", making it suitable for late adoption in the "unified electricity market". [ABSTRACT FROM AUTHOR]

This paper documents depositional structures and their reservoir characteristics in the Wufeng–Longmaxi shale from outcrops and cores using thin sections, X-ray powder diffraction (XRD) analysis, carbon–sulfur analyzer, helium porosimeter, decay permeameter, and focused ion beam scanning electron microscope (FIB-SEM). In the study area, clayey and silty laminae abound in the shale. Clayey laminae are rich in bedding parallel fractures, microfractures, and organic pore networks. Silty laminae are rich in isolated inorganic pores and limited amounts of bedding non-parallel fractures. Various inter-lamination of clayey and silty laminae form five depositional structure types which are closely related to the ancient hydrodynamics, paleoredox condition, and sedimentation rate and have significant impacts on shale fractures, microfractures, pore types, pore-size distribution, and porosity. For the paper lamination (PL) and grading lamination composed of siltstone and claystone (GL-SC), organic pores account for 71.6% and 61.4% of the total, and dense bedding parallel and non-parallel fractures intersect to form connective networks. In the interlaminated lamination composed of siltstone and claystone (IL), grading lamination composed of claystone (GL-C) and structureless beds (SB), organic pores merely account for 20% to 51.8% of the total and minor isolated bedding parallel fractures occur. Among five depositional structure types, the PL and GL-SC have the highest porosity, permeability, TOC content, siliceous content, organic pore proportions, and ratios of horizontal to vertical permeability, which help them become shale gas exploration and development targets. [ABSTRACT FROM AUTHOR]

Due to the volatility of natural resources, the power fluctuations of photovoltaic (PV) generation have serious negative impacts on the power quality. This paper reports a novel approach to resolve this problem in a combined cascade hydro-PV-pumped storage (CH-PV-PS) generation system through appropriate power distribution on a small time scale. According to the characteristics of power generation systems and multi-constraints, how to obtain the optimal smoothing effects with the small cost is a key challenge. For this purpose, wavelet packet decomposition is modified by constructing cost function and ideal power trajectory sequences to obtain a new adaptive power distribution method for the CH-PV-PS generation system considering the boundary conditions of the system in this paper. At the same time, to meet the real-time control requirements of actual systems, an additive function is presented to improve the optimization speed of the adaptive power distribution method. In the meantime, a fuzzy controller is designed to optimize the inevitable delay time of the power scheduling system, and the starting threshold is set to avoid the frequently mode conversion of pumped storage. Finally, the performance of the method is evaluated based on the PV station data in Xiaojin County, Sichuan Province, China. Simulation results based on Matlab-simulink indicate that the proposed method can effectively suppress PV power fluctuations and ensure normal operation of the CH-PV-PS generation system within the multiple constraints. [ABSTRACT FROM AUTHOR]

The mismatching between the multi-scale feature of complex fracture networks (CFNs) in unconventional reservoirs and their current numerical approaches is a conspicuous problem to be solved. In this paper, the CFNs are divided into hydraulic macro-fractures, induced fractures, and natural micro-fractures according to their mode of origin. A hybrid model coupling various numerical approaches is proposed to match the three-dimensional multi-scale fracture networks. The macro-fractures with high-conductivity and wide-aperture are explicitly characterized by a mimetic Green element method-based hierarchical fracture model. The induced fractures and natural micro-fractures that have features of low-conductivity and small-openings are upscaled to the dual-medium grid and enhanced matrix grid through the equivalent continuum-medium method, respectively. Subsequently, some benchmark cases are implemented to confirm the high-precision and high-robustness of the proposed hybrid model that indeed accomplishes accurate modeling of fluid flow in multi-scale CFNs by comparing with commercial software tNavigator®. Furthermore, an integrated workflow of simulation modeling for multiscale CFNs combined with a field example in Sichuan from China is used to analyzing the production information of fractured horizontal wells in shale gas reservoirs. Compared with the field production data from this typical well, it can be proved that the hybrid model has strong reliability and practicability. [ABSTRACT FROM AUTHOR]

This paper deals with the study of multi-channel adaptive noise cancellation with a focus on its application in electromagnetic (EM) telemetry. We presented new variable step-size least mean square (LMS) techniques: regularized variable step-size LMS and regularized sigmoid variable size LMS, for electromagnetic telemetry data processing. Considering the complexity and spatial distribution of environmental noise, algorithms with multiple reference signals were used to retrieve transmitted EM signals. The feasibility of the regularized variable step size LMS algorithms with numerical simulation was analyzed and presented. The adaptive processing techniques were applied in the recovery of frequency and binary phase shift key modulated signal. The proposed multi-channel adaptive technique achieves fast convergence speed, low mean squared error and is shown to have good convergence characteristics compared to conventional methods. In addition to attaining good results from the multi-channel adaptive filter and performing the signal analysis in real-time, we implemented combined fast effective impulse noise removal techniques. The combination of median and mean filters was effective in removing a wide range of impulsive noises without distorting any other data points. Further, electromagnetic telemetry data were acquired during a drilling operation in Sichuan province, China, for real field application. Data processing workflow was designed for EM telemetry data processing based on the noise characteristics, simulation results and expected result for demodulation. To establish a comprehensive overview, a performance comparison of the acquisition array system is also provided. Conclusively, the introduced multichannel adaptive noise canceling techniques are very effective in recovering transmitted EM telemetry signals. [ABSTRACT FROM AUTHOR]

This paper deals with the study of multi-channel adaptive noise cancellation with a focus on its application in electromagnetic (EM) telemetry. We presented new variable step-size least mean square (LMS) techniques: regularized variable step-size LMS and regularized sigmoid variable size LMS, for electromagnetic telemetry data processing. Considering the complexity and spatial distribution of environmental noise, algorithms with multiple reference signals were used to retrieve transmitted EM signals. The feasibility of the regularized variable step size LMS algorithms with numerical simulation was analyzed and presented. The adaptive processing techniques were applied in the recovery of frequency and binary phase shift key modulated signal. The proposed multi-channel adaptive technique achieves fast convergence speed, low mean squared error and is shown to have good convergence characteristics compared to conventional methods. In addition to attaining good results from the multi-channel adaptive filter and performing the signal analysis in real-time, we implemented combined fast effective impulse noise removal techniques. The combination of median and mean filters was effective in removing a wide range of impulsive noises without distorting any other data points. Further, electromagnetic telemetry data were acquired during a drilling operation in Sichuan province, China, for real field application. Data processing workflow was designed for EM telemetry data processing based on the noise characteristics, simulation results and expected result for demodulation. To establish a comprehensive overview, a performance comparison of the acquisition array system is also provided. Conclusively, the introduced multichannel adaptive noise canceling techniques are very effective in recovering transmitted EM telemetry signals. [ABSTRACT FROM AUTHOR]

A variable sedimentary environment and accumulation process leads to a complex pore structure in deep carbonate gas reservoirs, and the physical properties are quite different between layers. Moreover, some pores and throats are filled with solid bitumen (SB), which not only interferes with reservoir analysis, but also affects efficient development. However, previous studies on SB mainly focused on the accumulation process and reservoir analysis, and there are few reports about the influence on development. In this paper, through scanning electron microscope analysis, SB extraction, gas flow experiments and depletion experiments, and a similar transformation between experimental results and reservoir production, the production characteristics of carbonate gas reservoirs with different pore structures were studied, and the influence of SB on pore structure, reservoir analysis and development were systematically analyzed. The results show that permeability is one of the key factors affecting gas production rate and recovery, and the production is mainly contributed by high-permeability layers. Although the reserves are abundant, the gas production rate and recovery of layers with a low permeability are relatively low. The SB reduces the pore and throat radius, resulting in porosity and permeability being decreased by 4.73–6.28% and 36.02–3.70%, respectively. With the increase in original permeability, the permeability loss rate decreases. During development, the loss rate of gas production rate is much higher than that of permeability. Increasing the production pressure difference is conducive to reducing the influence. SB also reduces the recovery, which leads to the loss rate of gas production being much higher than that of porosity. For reservoirs with a high permeability, the loss rates of gas production rate and the amount produced are close to those of permeability and porosity. Therefore, in the reservoir analysis and development of carbonate gas reservoirs bearing SB, it is necessary and significant to analyze the influence of reservoir types. [ABSTRACT FROM AUTHOR]

The abundant reserve of shale gas in Sichuan Basin has become a significant natural gas component in China. To achieve efficient development of shale gas, it is necessary to analyze the stress state, pore pressure, and reservoir mechanical properties such that an accurate geomechanical model can be established. In this paper, Six wells of Neijiang-Dazu and North Rongchang (NDNR) Block were thoroughly investigated to establish the geomechanical model for the study area. The well log analysis was performed to derive the in-situ stresses and pore pressure while the stress polygon was applied to constrain the value of the maximum horizontal principal stress. Image and caliper data, mini-frac test and laboratory rock mechanics test results were used to calibrate the geomechanical model. The model was further validated by comparing the model prediction against the actual wellbore failure observed in the field. It was found that it is associated with the strike-slip (SS) stress regime; the orientation of SHmax was inferred to be 106–130° N. The pore pressure appears to be approximately hydrostatic from the surface to 1000 m true vertical depth (TVD), but then becomes over-pressured from the Xujiahe formation. The geomechanical model can provide guidance for the subsequent drilling and completion in this area and be used to effectively avoid complex drilling events such as collapse, kick, and lost circulation (mud losses) along the entire well. Also, the in-situ stress and pore pressure database can be used to analyze wellbore stability issues as well as help design hydraulic fracturing operations. [ABSTRACT FROM AUTHOR]