Search

There is increasing focus on applying deep learning methods to electrocardiograms (ECGs), with recent studies showing that neural networks (NNs) can predict future heart failure or atrial fibrillation from the ECG alone. However, large numbers of ECGs are needed to train NNs, and many ECGs are currently only in paper format, which are not suitable for NN training. We developed a fully-automated online ECG digitisation tool to convert scanned paper ECGs into digital signals. Using automated horizontal and vertical anchor point detection, the algorithm automatically segments the ECG image into separate images for the 12 leads and a dynamical morphological algorithm is then applied to extract the signal of interest. We then validated the performance of the algorithm on 515 digital ECGs, of which 45 were printed, scanned and redigitised. The automated digitisation tool achieved 99.0% correlation between the digitised signals and the ground truth ECG (n = 515 standard 3-by-4 ECGs) after excluding ECGs with overlap of lead signals. Without exclusion, the performance of average correlation was from 90 to 97% across the leads on all 3-by-4 ECGs. There was a 97% correlation for 12-by-1 and 3-by-1 ECG formats after excluding ECGs with overlap of lead signals. Without exclusion, the average correlation of some leads in 12-by-1 ECGs was 60–70% and the average correlation of 3-by-1 ECGs achieved 80–90%. ECGs that were printed, scanned, and redigitised, our tool achieved 96% correlation with the original signals. We have developed and validated a fully-automated, user-friendly, online ECG digitisation tool. Unlike other available tools, this does not require any manual segmentation of ECG signals. Our tool can facilitate the rapid and automated digitisation of large repositories of paper ECGs to allow them to be used for deep learning projects. [ABSTRACT FROM AUTHOR]

Copyright of Lijecnicki Vjesnik is the property of Croatian Medical Association and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers' abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations. [ABSTRACT FROM AUTHOR]

The electrocardiogram (ECG) signal describes the heart's electrical activity, allowing it to detect several health conditions, including cardiac system abnormalities and dysfunctions. Nowadays, most patient medical records are still paper-based, especially those made in past decades. The importance of collecting digitized ECGs is twofold: firstly, all medical applications can be easily implemented with an engineering approach if the ECGs are treated as signals; secondly, paper ECGs can deteriorate over time, therefore a correct evaluation of the patient's clinical evolution is not always guaranteed. The goal of this paper is the realization of an automatic conversion algorithm from paper-based ECGs (images) to digital ECG signals. The algorithm involves a digitization process tested on an image set of 16 subjects, also with pathologies. The quantitative analysis of the digitization method is carried out by evaluating the repeatability and reproducibility of the algorithm. The digitization accuracy is evaluated both on the entire signal and on six ECG time parameters (R-R peak distance, QRS complex duration, QT interval, PQ interval, P-wave duration, and heart rate). Results demonstrate the algorithm efficiency has an average Pearson correlation coefficient of 0.94 and measurement errors of the ECG time parameters are always less than 1 mm. Due to the promising experimental results, the algorithm could be embedded into a graphical interface, becoming a measurement and collection tool for cardiologists. [ABSTRACT FROM AUTHOR]

With the development of the customization concept, small-batch and multi-variety production will become one of the major production modes, especially for fast-moving consumer goods. However, this production mode has two issues: high production cost and the long manufacturing period. To address these issues, this study proposes a multi-objective optimization model for the flexible flow-shop to optimize the production scheduling, which would maximize the production efficiency by minimizing the production cost and makespan. The model is designed based on hybrid algorithms, which combine a fast non-dominated genetic algorithm (NSGA-II) and a variable neighborhood search algorithm (VNS). In this model, NSGA-II is the major algorithm to calculate the optimal solutions. VNS is to improve the quality of the solution obtained by NSGA-II. The model is verified by an example of a real-world typical FFS, a tissue papermaking mill. The results show that the scheduling model can reduce production costs by 4.2% and makespan by 6.8% compared with manual scheduling. The hybrid VNS-NSGA-II model also shows better performance than NSGA-II, both in production cost and makespan. Hybrid algorithms are a good solution for multi-objective optimization issues in flexible flow-shop production scheduling. [ABSTRACT FROM AUTHOR]

With the exponential growth in the number of academic researchers, it is crucial for editors of scientific journals to identify the highest-quality papers. While several measures exist to evaluate a paper's impact post-publication, the challenge of determining the potential impact of a manuscript during the review process remains an understudied issue. In this paper, we propose a reviewer-reputation ranking algorithm to identify high-quality papers based on paper citations, where a reviewer's reputation is computed from the correlation between their past ratings and the current number of citations received by the papers they have evaluated. During the review process, reviewers with high reputation scores are given more weight to determine the quality of papers. We test the algorithm on an artificial network with 200 reviewers and 600 papers, as well as on the American Physical Society (APS) data set, including in the analysis 308,243 papers and 274,154 mutual citations. We compare our approach with two existing methods, demonstrating that our algorithm significantly outperforms the others in identifying manuscripts with the highest quality. Our findings can help improve the impact of scientific journals, thereby contributing to academic and scientific progress. • We propose an algorithm to identify the papers with the highest quality from a large number of submissions. • We compare our new algorithm with other existing methods of aggregating user ratings in various online services. • We test our algorithm both with an artificial network and with the empirical data of the APS data set. • We show that our algorithm outperforms the other methods in identifying the papers with the highest quality. [ABSTRACT FROM AUTHOR]

This special issue contains six revised and extended versions of tool papers that appeared in the proceedings of TACAS 2021, the 27th International Conference on Tools and Algorithms for the Construction and Analysis of Systems. The issue is dedicated to the realization of algorithms in tools and the studies of the application of these tools for analysing hard- and software systems. [ABSTRACT FROM AUTHOR]

In order to improve the effect of intelligent automatic test paper composition, this paper combines the hybrid fuzzy clustering algorithm to study the computer automatic test paper composition algorithm. In this paper, a computer automatic test paper composition system based on hybrid fuzzy clustering algorithm is constructed. Moreover, the hybrid fuzzy clustering method used in this paper is used as the basic algorithm of the system, and the algorithm is improved according to the actual needs of intelligent paper composition. In addition, this paper uses an intelligent algorithm to input the relevant constraint parameters and combines the original parameters to select the most suitable test questions from the database and combine them into test papers. Finally, this paper constructs the system structure based on the requirements of intelligent test paper composition. The experimental research shows that the computer automatic test paper composition system based on the hybrid fuzzy clustering algorithm proposed in this paper has a good test paper composition function, which can effectively promote the progress of the intelligent examination mode in colleges and universities. [ABSTRACT FROM AUTHOR]

OBJECTIVE: To develop an automated algorithm to detect, quantify, and differentiate between tremor using pen-on-paper spirals. METHODS: Patients with essential tremor (n = 25), dystonic tremor (n = 25), Parkinson’s disease (n = 25), and healthy volunteers (HV, n = 25) drew free-hand spirals. The algorithm derived the mean deviation (MD) and tremor variability from scanned images. MD and tremor variability were compared with 1) the Bain and Findley scale, 2) the Fahn–Tolosa–Marin tremor rating scale (FTM–TRS), and 3) the peak power and total power of the accelerometer spectra. Inter and intra loop widths were computed to differentiate between the tremor. RESULTS: MD was higher in the tremor group (48.9±26.3) than in HV (26.4±5.3; p < 0.001). The cut-off value of 30.3 had 80.9% sensitivity and 76.0% specificity for the detection of the tremor [area under the curve: 0.83; 95% confidence index (CI): 0.75, 0.91, p < 0.001]. MD correlated with the Bain and Findley ratings (rho = 0.491, p = 0 < 0.001), FTM–TRS part B (rho = 0.260, p = 0.032) and accelerometric measures of postural tremor (total power, rho = 0.366, p < 0.001; peak power, rho = 0.402, p < 0.001). Minimum Detectable Change was 19.9%. Inter loop width distinguished Parkinson’s disease spirals from dystonic tremor (p < 0.001, 95% CI: 54.6, 211.1), essential tremor (p = 0.003, 95% CI: 28.5, 184.9), or HV (p = 0.036, 95% CI: -160.4, -3.9). CONCLUSION: The automated analysis of pen-on-paper spirals generated robust variables to quantify the tremor and putative variables to distinguish them from each other. SIGNIFICANCE: This technique maybe useful for epidemiological surveys and follow-up studies on tremor. [ABSTRACT FROM AUTHOR]

Compared to the conventional boost power factor correction (PFC) converter, a totem-pole bridgeless PFC has high efficiency because it does not have an input diode rectifier stage, but a current spike may occur when the polarity of the grid voltage changes. This paper proposes a digital control algorithm for bridgeless totem-pole PFC with a simple control structure based on the phase angle of grid voltage. The proposed algorithm has a PI-based double-loop control structure and performs DC-link voltage and input inductor current control. Rectifying switches operate based on the proposed rectification algorithm using phase angle information calculated through a single-phase phase-locked loop (PLL) to prevent current spikes. The feed-forward duty ratio value is calculated according to the polarity of the grid voltage and added to the double-loop controller to perform appropriate power factor control. The performance and feasibility of the proposed control algorithm are verified through a 3 kW hardware prototype. [ABSTRACT FROM AUTHOR]

The traditional method for transformer moisture diagnosis is to establish empirical equations between feature parameters extracted from frequency domain spectroscopy (FDS) and the transformer’s moisture content. However, the established empirical equation may not be applicable to a novel testing environment, resulting in an unreliable evaluation result. In this regard, it is acknowledged that FDS combined with machine learning is more suitable for estimating moisture content in a variety of test environments. Nonetheless, the accuracy of the estimation results obtained using the existing method is limited by the algorithm’s inability to generalize. To address this issue, we propose an AdaBoost algorithm-enhanced back-propagation neural network (BP_AdaBoost). This study creates a database by extracting feature parameters from the FDS that characterize the insulation states of the prepared samples. Then, using the BP_AdaBoost algorithm and the newly constructed database, the moisture estimation models are trained. Finally, the results of the estimation are discussed in terms of laboratory and field transformers. By comparing the proposed BP_AdaBoost algorithm to other intelligence algorithms, it is demonstrated that it not only performs better in generalization, but also maintains a high level of accuracy. [ABSTRACT FROM AUTHOR]

In 3D building models, a large number of texture maps with different sizes increase the number of model data loading and drawing batches, which greatly reduces the drawing efficiency of the model. Therefore, this paper proposes a texture set mapping method based on vertex importance. Firstly, based on the 2D space boxing algorithm, the texture maps are merged and a series of Mipmap texture maps are generated, and then the vertex curvature, texture variability and location information of each vertex are calculated, normalized, and weighted to get the importance of each vertex, and then finally, different Mipmap-level textures are remapped according to the importance of the vertices. The experiment proves that the algorithm in this paper can reduce the amount of texture data on the one hand, and avoid the rendering pressure brought by the still large amount of data after merging on the other hand, so as to improve the rendering efficiency of the model. [ABSTRACT FROM AUTHOR]

We study the quadratic cycle cover problem (QCCP), which aims to find a node-disjoint cycle cover in a directed graph with minimum interaction cost between successive arcs. We derive several semidefinite programming (SDP) relaxations and use facial reduction to make these strictly feasible. We investigate a nontrivial relationship between the transformation matrix used in the reduction and the structure of the graph, which is exploited in an efficient algorithm that constructs this matrix for any instance of the problem. To solve our relaxations, we propose an algorithm that incorporates an augmented Lagrangian method into a cutting-plane framework by utilizing Dykstra's projection algorithm. Our algorithm is suitable for solving SDP relaxations with a large number of cutting-planes. Computational results show that our SDP bounds and efficient cutting-plane algorithm outperform other QCCP bounding approaches from the literature. Finally, we provide several SDP-based upper bounding techniques, among which is a sequential Q-learning method that exploits a solution of our SDP relaxation within a reinforcement learning environment. Summary of Contribution: The quadratic cycle cover problem (QCCP) is the problem of finding a set of node-disjoint cycles covering all the nodes in a graph such that the total interaction cost between successive arcs is minimized. The QCCP has applications in many fields, among which are robotics, transportation, energy distribution networks, and automatic inspection. Besides this, the problem has a high theoretical relevance because of its close connection to the quadratic traveling salesman problem (QTSP). The QTSP has several applications, for example, in bioinformatics, and is considered to be among the most difficult combinatorial optimization problems nowadays. After removing the subtour elimination constraints, the QTSP boils down to the QCCP. Hence, an in-depth study of the QCCP also contributes to the construction of strong bounds for the QTSP. In this paper, we study the application of semidefinite programming (SDP) to obtain strong bounds for the QCCP. Our strongest SDP relaxation is very hard to solve by any SDP solver because of the large number of involved cutting-planes. Because of that, we propose a new approach in which an augmented Lagrangian method is incorporated into a cutting-plane framework by utilizing Dykstra's projection algorithm. We emphasize an efficient implementation of the method and perform an extensive computational study. This study shows that our method is able to handle a large number of cuts and that the resulting bounds are currently the best QCCP bounds in the literature. We also introduce several upper bounding techniques, among which is a distributed reinforcement learning algorithm that exploits our SDP relaxations. [ABSTRACT FROM AUTHOR]

Copyright of Revista Catalana de Dret Públic is the property of Revista Catalana de Dret Public and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper explores digital marginalization, data marginalization, and algorithmic exclusions in the Souths. To this effect, it argues that underrepresented users and communities continue to be marginalized and excluded by digital technologies, by big data, and by algorithms employed by organizations, corporations, institutions, and governments in various data jurisdictions. Situating data colonialism within the Souths, the paper contends that data ableism, data disablism, and data colonialism are at play when data collected, collated, captured, configured, and processed from underrepresented users and communities is utilized by mega entities for their own multiple purposes. It also maintains that data coloniality, as opposed to data colonialism, is impervious to legal and legislative interventions within data jurisdictions. Additionally, it discusses digital citizenship (DC) and its related emerging regimes. Moreover, the paper argues that digital exclusion transcends the simplistic haves versus the have nots dualism as it manifests itself in multiple layers and in multiple dimensions. Furthermore, it characterizes how algorithmic exclusions tend to perpetuate historical human biases despite the pervasive view that algorithms are autonomous, neutral, rational, objective, fair, unbiased, and non-human. Finally, the paper advances a critical southern decolonial (CSD) approach to datafication, algorithms, and digital citizenship by means of which data coloniality, algorithmic coloniality, and the coloniality embodied in DC have to be critiqued, challenged, and dismantled. [ABSTRACT FROM AUTHOR]

The intrinsic features of documents, such as paper color, texture, aging, translucency, the kind of printing, typing or handwriting, etc., are important with regard to how to process and enhance their image. Image binarization is the process of producing a monochromatic image having its color version as input. It is a key step in the document processing pipeline. The recent Quality-Time Binarization Competitions for documents have shown that no binarization algorithm is good for any kind of document image. This paper uses a sample of the texture of the scanned historical documents as the main document feature to select which of the 63 widely used algorithms, using five different versions of the input images, totaling 315 document image-binarization schemes, provides a reasonable quality-time trade-off. [ABSTRACT FROM AUTHOR]

The present paper is in two folds. In the first fold, we prove the Lipschitz continuity of the proximal mapping associated with a general strongly H-monotone mapping and compute an estimate of its Lipschitz constant under some mild assumptions imposed on the mapping H involved in the proximal mapping. We provide two examples to show that a maximal monotone mapping need not be a general H-monotone for a single-valued mapping H from a Banach space to its dual space. A class of multi-valued nonlinear variational inclusion problems is considered, and by using the notion of proximal mapping and Nadler's technique, an iterative algorithm with mixed errors is suggested to compute its solutions. Under some appropriate hypotheses imposed on the mappings and parameters involved in the multi-valued nonlinear variational inclusion problem, the strong convergence of the sequences generated by the proposed algorithm to a solution of the aforesaid problem is verified. The second fold of this paper investigates and analyzes the notion of Cn-monotone mappings defined and studied in [S.Z. Nazemi, A new class of monotone mappings and a new class of variational inclusions in Banach spaces, J. Optim. Theory Appl. 155(3)(2012) 785-795]. Several comments related to the results and algorithm appeared in the above mentioned paper are given. [ABSTRACT FROM AUTHOR]

Nowadays, the application of artificial intelligence (AI) algorithms and techniques is ubiquitous and transversal. Fields that take advantage of AI advances include sound and music processing. The advances in interdisciplinary research potentially yield new insights that may further advance the AI methods in this field. This special issue aims to report recent progress and spur new research lines in AI-driven sound and music processing, especially within interdisciplinary research scenarios. [ABSTRACT FROM AUTHOR]

Millimeter-wave radar-based identification technology has a wide range of applications in persistent identity verification, covering areas such as security production, healthcare, and personalized smart consumption systems. It has received extensive attention from the academic community due to its advantages of being non-invasive, environmentally insensitive and privacy-preserving. Existing identification algorithms mainly rely on a single signal, such as breathing or heartbeat. The reliability and accuracy of these algorithms are limited due to the high similarity of breathing patterns and the low signal-to-noise ratio of heartbeat signals. To address the above issues, this paper proposes an algorithm for multimodal fusion for identity recognition. This algorithm extracts and fuses features derived from phase signals, respiratory signals, and heartbeat signals for identity recognition purposes. The spatial features of signals with different modes are first extracted by the residual network (ResNet), after which these features are fused with a spatial-channel attention fusion module. On this basis, the temporal features are further extracted with a time series-based self-attention mechanism. Finally, the feature vectors of the user's vital sign modality are obtained to perform identity recognition. This method makes full use of the correlation and complementarity between different modal signals to improve the accuracy and reliability of identification. Simulation experiments show that the algorithm identity recognition proposed in this paper achieves an accuracy of 94.26% on a 20-subject self-test dataset, which is much higher than that of the traditional algorithm, which is about 85%. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue of the journal AIMS Mathematics on the topic of discrete optimization. The issue includes 21 papers covering a range of subjects, including molecular trees, network systems, variational inequality problems, scheduling, image restoration, spectral clustering, integral equations, convex functions, graph products, optimization algorithms, air quality prediction, humanitarian planning, inertial methods, neural networks, transportation problems, emotion identification, fixed-point problems, structural engineering design, single machine scheduling, and ensemble learning. The papers present new theoretical results, algorithms, and applications in these areas. The guest editor expresses gratitude to the journal staff and reviewers and hopes that readers will find inspiration for their own research. [Extracted from the article]

The paper "Well-behaved Online Load Balancing Against Strategic Jobs" by Li, Li and Wu considers a truthful online load-balancing problem with the objective of the makespan minimization on related machines. The 2019 workshop on models and algorithms for planning and scheduling problems was held in Renesse (The Netherlands). [Extracted from the article]

Smart communication has significantly advanced with the integration of the Internet of Things (IoT). Many devices and online services are utilized in the network system to cope with data gathering and forwarding. Recently, many traffic-aware solutions have explored autonomous systems to attain the intelligent routing and flowing of internet traffic with the support of artificial intelligence. However, the inefficient usage of nodes' batteries and long-range communication degrades the connectivity time for the deployed sensors with the end devices. Moreover, trustworthy route identification is another significant research challenge for formulating a smart system. Therefore, this paper presents a smart Random walk Distributed Secured Edge algorithm (RDSE), using a multi-regression model for IoT networks, which aims to enhance the stability of the chosen IoT network with the support of an optimal system. In addition, by using secured computing, the proposed architecture increases the trustworthiness of smart devices with the least node complexity. The proposed algorithm differs from other works in terms of the following factors. Firstly, it uses the random walk to form the initial routes with certain probabilities, and later, by exploring a multi-variant function, it attains long-lasting communication with a high degree of network stability. This helps to improve the optimization criteria for the nodes' communication, and efficiently utilizes energy with the combination of mobile edges. Secondly, the trusted factors successfully identify the normal nodes even when the system is compromised. Therefore, the proposed algorithm reduces data risks and offers a more reliable and private system. In addition, the simulations-based testing reveals the significant performance of the proposed algorithm in comparison to the existing work. [ABSTRACT FROM AUTHOR]

In order to improve the teaching effect of sports dance, this paper analyzes the traditional dance teaching motion capture, uses sensor motion perception algorithms to capture sports dance motion perception, and designs an intelligent sensor system that can be used for sports dance motion capture. Moreover, this paper combines the digital filter algorithm to design the hardware system structure of the sports dance motion capture system and builds a motion capture system for sports dance teaching based on the digital filter algorithm according to actual needs. In addition, this paper combines the simulation test to evaluate the performance of the system designed in this paper. The research results show that the motion capture system for sports dance teaching based on the digital filtering algorithm proposed in this paper can play an important role in sports dance teaching and effectively improve the efficiency of sports dance teaching. [ABSTRACT FROM AUTHOR]

At present, the monitoring of concrete cracks is still mainly carried out by engineering personnel using simple mechanical monitoring instruments. The human inspection will undoubtedly be interfered by the individual's psychological, physical, and external conditions, and there may also be unobjective emotions, so it is impossible to ensure that the quality of the detection is up to standard and accurate. This paper combines digital image processing technology and multiscale feature analysis automatic detection algorithm to construct an intelligent building structure crack detection system. Moreover, this paper proposes an enrichment scheme for the unknown partially entangled states of building microparticles and utilizes the entanglement exchange process based on the Raman interaction of two building microparticles. The experimental results show that the automatic detection method of building cracks based on digital image processing technology and multiscale feature analysis has a good effect. [ABSTRACT FROM AUTHOR]

Federated learning (FL) is a scheme in which several consumers work collectively to unravel machine learning (ML) problems, with a dominant collector synchronizing the procedure. This decision correspondingly enables the training data to be distributed, guaranteeing that the individual device's data are secluded. The paper systematically reviewed the available literature using the Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) guiding principle. The study presents a systematic review of appliable ML approaches for FL, reviews the categorization of FL, discusses the FL application areas, presents the relationship between FL and Blockchain Technology (BT), and discusses some existing literature that has used FL and ML approaches. The study also examined applicable machine learning models for federated learning. The inclusion measures were (i) published between 2017 and 2021, (ii) written in English, (iii) published in a peer-reviewed scientific journal, and (iv) Preprint published papers. Unpublished studies, thesis and dissertation studies, (ii) conference papers, (iii) not in English, and (iv) did not use artificial intelligence models and blockchain technology were all removed from the review. In total, 84 eligible papers were finally examined in this study. Finally, in recent years, the amount of research on ML using FL has increased. Accuracy equivalent to standard feature-based techniques has been attained, and ensembles of many algorithms may yield even better results. We discovered that the best results were obtained from the hybrid design of an ML ensemble employing expert features. However, some additional difficulties and issues need to be overcome, such as efficiency, complexity, and smaller datasets. In addition, novel FL applications should be investigated from the standpoint of the datasets and methodologies. [ABSTRACT FROM AUTHOR]

In order to improve the effect of 3D virtual product network display, this paper combines digital drive technology to analyze the virtual simulation algorithm and proposes a digital drive-based Hough transform clustering virtual image processing algorithm. Through the knowledge of clustering and generalized Hough transform, generalized Hough transform is applied to clustering. Moreover, this paper uses cluster analysis to determine the image characteristics of three-dimensional virtual products. In addition, this article combines the methods proposed in this article to construct a three-dimensional virtual product network display system. The research shows that the digital-driven 3D virtual product network display algorithm model proposed in this paper has a good 3D virtual display effect. [ABSTRACT FROM AUTHOR]

Letter to the Editor concerning "Describing center of pressure movement in stabilometry by ellipse area approximation" from Agnieszka Golab. Reply to "Describing center of pressure movement in stabilometry by ellipse area approximation" from Agnieszka Golab concerning the paper "A Review of Center of Pressure (COP) Variables to Quantify Standing Balance in Elderly People: Algorithms and Open Access Code" Our choice was actually to present the formula of the prediction ellipse area in the article, as it indeed does not strongly depend on the sample size as the confidence ellipse area does. [Extracted from the article]

Cross-language communication puts forward higher requirements for information mining in English translation course. Aiming at the problem that the frequent patterns in the current digital mining algorithms produce a large number of patterns and rules, with a long execution time, this paper proposes a digital mining algorithm for English translation course information based on digital twin technology. According to the results of word segmentation and tagging, the feature words of English translation text are extracted, and the cross-language mapping of text is established by using digital twin technology. The estimated probability of text translation is maximized by corresponding relationship. The text information is transformed into text vector, the semantic similarity of text is calculated, and the degree of translation matching is judged. Based on this data dimension, the frequent sequence is constructed by transforming suffix sequence into prefix sequence, and the digital mining algorithm is designed. The results of example analysis show that the execution time of digital mining algorithm based on digital twin technology is significantly shorter than that based on Apriori and Map Reduce, and the mining accuracy rate reached more than 80%, which has good performance in processing massive data. [ABSTRACT FROM AUTHOR]

With the development of the times, figurative expressions no longer meet the creative needs of artists and the aesthetic demands of the people. In order to express art in a more profound way, the perfect use of abstract graphics plays a crucial role in the success of the work. In recent years, there has been a surge in the creation of digital art, but there is relatively little theoretical literature on the combination of abstract graphics as a visual language and digital art. In addition, research on the theoretical aspects of digital art design is also relatively weak, so it is essential to analyse the formal aesthetics and innovative applications. In fact, digital art design has a very important role to play in promoting the development of creative cultural industries. In other words, the healthy development of digital art design can influence the future prospects of a country's creative and cultural industries. Digital art design is an integrated and complex production process and labour outcome. In addition to its human, aesthetic, and social value, digital art also has an economic value. Digital art is a new art form that combines digital technology and artistic aesthetics. As such, digital art is characterised by high technology, diverse forms, popularised art, and the advantages of high communication, interactivity, and influence, which can provide more assistance for the innovation and application of abstract graphics. Digital art is multifaceted and has an artistic expression that cannot be matched by other forms of technology. Abstract graphics, driven by digital art, are full of novelty and interest and can greatly enrich people's emotions and senses. Abstract graphics bring the experience of digital art to its fullest potential. The combination of digital art and abstract graphics offers more innovation and possibilities for the development of art and will bring great prosperity to art communication. With the widespread use of computer and network technology, the Internet has developed rapidly. In this context, digital art, as art created in a digital way and concept, has gained widespread attention. As a result, how to integrate existing computer resources in the new environment to build a model of digital art design effectiveness will cause a direct influence on the quality of digital art design with digital content innovation as the core. At the same time, as digital art becomes more and more popular, the demand for digital talents becomes very urgent. As a result, the cultivation of high-quality digital talents has become a major concern for society. Therefore, in order to explore the success of digital art design and the cultivation of digital art talents, and to better serve the innovation of digital art, this paper proposes a digital art effectiveness model based on the K-medoids algorithm. This model can provide a deeper and more comprehensive understanding of digital art and abstract graphics and provide theoretical support for professional design creation. [ABSTRACT FROM AUTHOR]

A crucial field in software development and testing is Software Defect Prediction (SDP) because the quality, dependability, efficiency, and cost of the software are all improved by forecasting software defects at an earlier stage. Many existing models predict defects to facilitate software testing process for testers. A comprehensive review of these models from different perspectives is crucial to help new researchers enter this field and learn about its latest developments. Algorithms, method types, datasets, and tools were the only perspectives discussed in the current literature. A comprehensive study that takes into account a wide spectrum of viewpoints hasn't yet been published. Examining the development and advancement of SDP-related studies is the goal of this literature review. It provides a comprehensive and updated state-of-the-art that satisfies all stated criteria. Out of 591 papers retrieved from 6 reputable databases, 73 papers were eligible for analysis. This review addresses relevant research questions regarding techniques & method types, data details, tools, code syntax, semantics, structural and domain information. Motivation to conduct this comprehensive review is to equip the readers with the necessary information and keep them informed about the software defect prediction domain. [ABSTRACT FROM AUTHOR]

On the network service platform for vocational education, there are currently over 10,000 online courses. Learners face a challenge in selecting interesting courses from the vast resources available. Learners' urgent need for personalized learning is becoming more apparent as educational informatization progresses. Personalized recommendation (PR) technology can aid personalized learning and increase learners' learning efficiency significantly. This paper constructs a smart classroom model based on AI (artificial intelligence) by studying the connotation and characteristics of smart classroom in light of the current research status and trend of smart classroom at home and abroad. The merits of the recommendation system are determined by the recommendation algorithm used by PR system. This paper primarily focuses on developing a personalized learning platform based on the CF (collaborative filtering) algorithm, as well as conducting system requirements analysis, database design, functional module design, implementation, and testing on this foundation. Experiments are carried out to see if the optimized PR algorithm in the network learning platform is effective. [ABSTRACT FROM AUTHOR]

An early detection tool for latent COVID-19 infections in oncology staff and patients is essential to prevent outbreaks in a cancer center. (1) Background: In this study, we developed and implemented two early detection tools for the radiotherapy area to identify COVID-19 cases opportunely. (2) Methods: Staff and patients answered a questionnaire (electronic and paper surveys, respectively) with clinical and epidemiological information. The data were collected through two online survey tools: Real-Time Tracking (R-Track) and Summary of Factors (S-Facts). Cut-off values were established according to the algorithm models. SARS-CoV-2 qRT-PCR tests confirmed the positive algorithms individuals. (3) Results: Oncology staff members (n = 142) were tested, and 14% (n = 20) were positives for the R-Track algorithm; 75% (n = 15) were qRT-PCR positive. The S-Facts Algorithm identified 7.75% (n = 11) positive oncology staff members, and 81.82% (n = 9) were qRT-PCR positive. Oncology patients (n = 369) were evaluated, and 1.36% (n = 5) were positive for the Algorithm used. The five patients (100%) were confirmed by qRT-PCR. (4) Conclusions: The proposed early detection tools have proved to be a low-cost and efficient tool in a country where qRT-PCR tests and vaccines are insufficient for the population. [ABSTRACT FROM AUTHOR]

Achieving community immunity against the coronavirus disease 2019 (COVID-19) depends on vaccinating the largest number of people within a specific period while taking all precautionary measures. To address this problem, this paper presents a smart parking system that will help the health crisis management committee to vaccinate the largest number of people with the minimum period of time while ensuring that all precautionary measures are followed, through a set of algorithms. These algorithms seek to ensure a uniform distribution of persons in parking. This paper proposes a novel complex system for smart parking and nine algorithms to address the NP-hard problem. The experimental results demonstrate the performance of the proposed algorithms in terms of gap and time. Applying these algorithms to smart cities to ensure precautionary measures against COVID-19 can help fight against this pandemic. [ABSTRACT FROM AUTHOR]

Traffic signs detection is an important and challenging task in intelligent driving perception system. This paper proposes an improved lightweight traffic signs detection framework based on YOLOv5. Firstly, the YOLOv5's backbone is replaced with ShuffleNet v2, which simplifies the calculation complexity and reduces the parameters of backbone network. Secondly, aiming at the problem of inconspicuous traffic sign characteristics in complex road environment, we use the CA attention mechanism in this paper to improve the saliency of the object. Finally, aiming at the large-scale difference between the traffic signs and the high proportion of small objects, we design the BCS-FPN to fuse multi-scale features and improve the representation ability of the small-scale objects. The TT-100K dataset is also analyzed and the dataset is collated. We test on the collated TT-100K dataset for the improved YOLOv5 in this paper. And the results show that compared with YOLOv5s, the mAP of our algorithm is equivalent to that of YOLOv5s, and the speed is improved by 20.8%. This paper also has carried on the experiment on embedded devices, experimental results show that our framework in computing power less embedded devices has a better effect. [ABSTRACT FROM AUTHOR]

Recent advances in path-planning algorithms have transformed robotics. The Rapidly exploring Random Tree (RRT) algorithm underpins autonomous robot navigation. This paper systematically examines the uses and development of RRT algorithms in single and multiple robots to demonstrate their importance in modern robotics studies. To do this, we have reviewed 70 works on RRT algorithms in single and multiple robot path planning from 2015 to 2023. RRT algorithm evolution, including crucial turning points and innovative techniques, have been examined. A detailed comparison of the RRT Algorithm versions reveals their merits, limitations, and development potential. The review's identification of developing regions and future research initiatives will enable roboticists to use RRT algorithms. This thorough review is essential to the robotics community, inspiring new ideas, helping problem-solving, and expediting single- and multi-robot system development. This highlights the necessity of RRT algorithms for autonomous and collaborative robotics advancement. [ABSTRACT FROM AUTHOR]

This paper primarily investigates enhanced object detection techniques for indoor service mobile robots. Robot operating systems (ROS) supply rich sensor data, which boost the models' ability to generalize. However, the model's performance might be hindered by constraints in the processing power, memory capacity, and communication capabilities of robotic devices. To address these issues, this paper proposes an improved you only look once version 5 (YOLOv5)-Lite object detection algorithm based on efficient multi-scale attention and bounding box regression combined with ROS. The algorithm incorporates efficient multi-scale attention (EMA) into the traditional YOLOv5-Lite model and replaces the C3 module with a lightweight C3Ghost module to reduce computation and model size during the convolution process. To enhance bounding box localization accuracy, modified precision-defined intersection over union (MPDIoU) is employed to optimize the model, resulting in the ROS–YOLOv5–FleetEMA model. The results indicated that relative to the conventional YOLOv5-Lite model, the ROS–YOLOv5–FleetEMA model enhanced the mean average precision (mAP) by 2.7% post-training, reduced giga floating-point operations per second (GFLOPS) by 13.2%, and decreased the params by 15.1%. In light of these experimental findings, the model was incorporated into ROS, leading to the development of a ROS-based object detection platform that offers rapid and precise object detection capabilities. [ABSTRACT FROM AUTHOR]

The performance of the existing student classroom behavior detection model is affected by various aspects such as dataset, algorithm and height as well as the differences between different classrooms, and there are problems such as a single dataset, low accuracy and low efficiency. In order to improve the accuracy of student classroom behavior detection algorithm, this paper proposes a student classroom behavior detection method based on improved convolutional neural network algorithm. Firstly, the student behavior detection dataset is constructed, and the student classroom behavior detection technology scheme is designed; secondly, in order to improve the detection accuracy, the features are extracted by using the new jumping bi-directional paths, and the attention mechanism module is added at different positions to improve the path aggregation network; weekly, the embedding positions of the attention mechanism strategy are determined by analyzing multiple sets of experiments, and the proposed student classroom behavior detection algorithm's effectiveness and superiority. [ABSTRACT FROM AUTHOR]

Data anomaly detection in small hydropower stations is an important research area because it positively affects the reliability of optimal scheduling and subsequent analytical studies of small hydropower station clusters. Although many anomaly detection algorithms have been introduced in the data preprocessing stage in various research areas, there is still little research on effective and highly reliable anomaly detection systems for practical applications in small hydropower stations. Therefore, this paper proposes a real‐time data anomaly detection system for small hydropower clusters (RDADS‐SHC) considering multiple time series. It addresses the difficulties of timely detection, alerting, and management of real‐time data anomalies (errors, omissions, and so on) in existing small hydropower stations. It proposes a real‐time data anomaly detection algorithm for small hydropower stations integrated with the Z‐score and dynamic time warping, which can detect and process abnormal information more accurately and efficiently, thereby improving the stability and reliability of data sampling. The paper proposes a Keepalived‐based hot‐standby RDADS‐SHC deployment model with m (m ≥ 2) units. It can automatically remove and restart faulty services and switch to their standbys, which significantly improve the reliability of the proposed system, ensuring the safe and stable operation of related functional services. This paper can detect anomalous data more accurately, and the system is more stable and reliable in a cluster detection environment. The actual operation has shown that compared with existing anomaly detection systems, the architecture and algorithms proposed in this paper can detect anomalous data more accurately, and the system is more stable and reliable in the small hydropower cluster detection environment. It solves abnormal data management in small hydropower stations and provides reliable support for subsequent analysis and decision‐making. [ABSTRACT FROM AUTHOR]

As an indispensable part of the vehicle environment perception task, road traffic marking detection plays a vital role in correctly understanding the current traffic situation. However, the existing traffic marking detection algorithms still have some limitations. Taking lane detection as an example, the current detection methods mainly focus on the location information detection of lane lines, and they only judge the overall attribute of each detected lane line instance, thus lacking more fine-grained dynamic detection of lane line attributes. In order to meet the needs of intelligent vehicles for the dynamic attribute detection of lane lines and more perfect road environment information in urban road environment, this paper constructs a fine-grained attribute detection method for lane lines, which uses pixel-level attribute sequence points to describe the complete attribute distribution of lane lines and then matches the detection results of the lane lines. Realizing the attribute judgment of different segment positions of lane instances is called the fine-grained attribute detection of lane lines (Lane-FGA). In addition, in view of the lack of annotation information in the current open-source lane data set, this paper constructs a lane data set with both lane instance information and fine-grained attribute information by combining manual annotation and intelligent annotation. At the same time, a cyclic iterative attribute inference algorithm is designed to solve the difficult problem of lane attribute labeling in areas without visual cues such as occlusion and damage. In the end, the average accuracy of the proposed algorithm reaches 97% on various types of lane attribute detection. [ABSTRACT FROM AUTHOR]

Efficient maritime search and rescue (SAR) is crucial for responding to maritime emergencies. In traditional SAR, fixed search path planning is inefficient and cannot prioritize high-probability regions, which has significant limitations. To solve the above problems, this paper proposes unmanned surface vehicles (USVs) path planning for maritime SAR based on POS-DQN so that USVs can perform SAR tasks reasonably and efficiently. Firstly, the search region is allocated as a whole using an improved task allocation algorithm so that the task region of each USV has priority and no duplication. Secondly, this paper considers the probability of success (POS) of the search environment and proposes a POS-DQN algorithm based on deep reinforcement learning. This algorithm can adapt to the complex and changing environment of SAR. It designs a probability weight reward function and trains USV agents to obtain the optimal search path. Finally, based on the simulation results, by considering the complete coverage of obstacle avoidance and collision avoidance, the search path using this algorithm can prioritize high-probability regions and improve the efficiency of SAR. [ABSTRACT FROM AUTHOR]

The efficient and accurate identification of traffic signs is crucial to the safety and reliability of active driving assistance and driverless vehicles. However, the accurate detection of traffic signs under extreme cases remains challenging. Aiming at the problems of missing detection and false detection in traffic sign recognition in fog traffic scenes, this paper proposes a recognition algorithm for traffic signs based on pix2pixHD+YOLOv5-T. Firstly, the defogging model is generated by training the pix2pixHD network to meet the advanced visual task. Secondly, in order to better match the defogging algorithm with the target detection algorithm, the algorithm YOLOv5-Transformer is proposed by introducing a transformer module into the backbone of YOLOv5. Finally, the defogging algorithm pix2pixHD is combined with the improved YOLOv5 detection algorithm to complete the recognition of traffic signs in foggy environments. Comparative experiments proved that the traffic sign recognition algorithm proposed in this paper can effectively reduce the impact of a foggy environment on traffic sign recognition. Compared with the YOLOv5-T and YOLOv5 algorithms in moderate fog environments, the overall improvement of this algorithm is achieved. The precision of traffic sign recognition of the algorithm in the fog traffic scene reached 78.5%, the recall rate was 72.2%, and mAP@0.5 was 82.8%. [ABSTRACT FROM AUTHOR]

Context: Software product lines (SPLs) have reached a considerable level of adoption in the software industry. The most commonly used models for managing the variability of SPLs are feature models (FMs). The analysis of FMs is an error-prone, tedious task, and it is not feasible to accomplish this task manually with large-scale FMs. In recent years, much effort has been devoted to developing reasoning algorithms for FMs. Aim: To synthesize the evidence on the use of reasoning algorithms for feature modeling. Method: We conducted a systematic mapping study, including six research questions. This study included 66 papers published from 2010 to 2020. Results: We found that most algorithms were used in the domain stage (70%). The most commonly used technologies were transformations (18%). As for the origins of the proposals, they were mainly rooted in academia (76%). The FODA model continued to be the most frequently used representation for feature modeling (70%). A large majority of the papers presented some empirical validation process (90%). Conclusion: We were able to respond to the RQs. The FODA model is consolidated as a reference within SPLs to manage variability. Responses to RQ2 and RQ6 require further review. [ABSTRACT FROM AUTHOR]

Sensor-based agriculture monitoring systems have limited outcomes on the detection or counting of vegetables from agriculture fields due to the utilization of either conventional color transformations or machine learning-based methods. To overcome these limitations, this research is aimed at proposing an IoT-based smart agriculture monitoring system with multiple algorithms such as detection, quantification, ripeness checking, and detection of infected vegetables. This paper presents smart agriculture monitoring systems for Internet of Things (IoT) applications. The CHT has been applied to detect and quantify vegetables from the agriculture field. Using color thresholding and color segmentation techniques, defected vegetables have also been detected. A machine learning method-convolutional neural network (CNN) has been used for the development and implementation of all algorithms. A comparison between traditional methods and CNN has been simulated in MATLAB to find out the optimal method for its implementation in this agricultural monitoring system. Compared to the traditional methods, the CNN is the optimal method in this research work which performed better over the previously developed algorithms with an accuracy of more than 90%. As an example (case study), a tomato field in Chittagong, Bangladesh, was chosen where a camera-mounted mobile robot captured images from the agriculture field for which the proposed IoT-based smart monitoring system was developed. This system will benefit farmers through the digitally monitored output at an agriculture field in Bangladesh as well as in Malaysia. Since this proposed smart IoT-based system is still driven by bulky, costly, and limited powered sensors, in a future work, for the required power of sensors, this research work is aimed at the design and development of an energy harvester (hybrid) (HEH) based on ultralow power electronics circuits to generate the required power of sensors. Implementation of multiple algorithms using CNN, circular Hough transformation (CHT), color thresholding, and color segmentation methods for the detection, quantification, ripeness checking, and detection of infected crops. [ABSTRACT FROM AUTHOR]

The paper [[10]] considers an assignment problem and some modifications which can be converted to routing, distribution, or scheduling problems. This special issue of I Algorithms i is dedicated to recent developments of scheduling algorithms and new applications. References 1 Werner F., Burtseva L., Sotskov Y. Special Issue on Algorithms for Scheduling Problems. For this problem, a hybrid metaheuristic algorithm is presented which combines a genetic algorithm with a so-called spotted hyena optimization algorithm. [Extracted from the article]

Complex systems in the real world often can be modeled as network structures, and community discovery algorithms for complex networks enable researchers to understand the internal structure and implicit information of networks. Existing community discovery algorithms are usually designed for single-layer networks or single-interaction relationships and do not consider the attribute information of nodes. However, many real-world networks consist of multiple types of nodes and edges, and there may be rich semantic information on nodes and edges. The methods for single-layer networks cannot effectively tackle multi-layer information, multi-relationship information, and attribute information. This paper proposes a community discovery algorithm based on multi-relationship embedding. The proposed algorithm first models the nodes in the network to obtain the embedding matrix for each node relationship type and generates the node embedding matrix for each specific relationship type in the network by node encoder. The node embedding matrix is provided as input for aggregating the node embedding matrix of each specific relationship type using a Graph Convolutional Network (GCN) to obtain the final node embedding matrix. This strategy allows capturing of rich structural and attributes information in multi-relational networks. Experiments were conducted on different datasets with baselines, and the results show that the proposed algorithm obtains significant performance improvement in community discovery, node clustering, and similarity search tasks, and compared to the baseline with the best performance, the proposed algorithm achieves an average improvement of 3.1% on Macro-F1 and 4.7% on Micro-F1, which proves the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This special issue of Software Tools for Technology Transfer comprises extended versions of selected papers from the 26th edition of the International Conference on Tools and Algorithms for the Construction and Analysis of Systems (TACAS 2020). The focus of this conference series is tools and algorithms for the rigorous analysis of software and hardware systems, and the papers in this special cover the spectrum of current work in this field. [ABSTRACT FROM AUTHOR]

This research studied the strategies that players use in sequential adversarial games. We took the Rock-Paper-Scissors (RPS) game as an example and ran players in two experiments. The first experiment involved two humans, who played the RPS together for 100 times. Importantly, our payoff design in the RPS allowed us to differentiate between participants who used a random strategy from those who used a Nash strategy. We found that participants did not play in agreement with the Nash strategy, but rather, their behavior was closer to random. Moreover, the analyses of the participants' sequential actions indicated heterogeneous cycle-based behaviors: some participants' actions were independent of their past outcomes, some followed a well-known win-stay/lose-change strategy, and others exhibited the win-change/lose-stay behavior. To understand the sequential patterns of outcome-dependent actions, we designed probabilistic computer algorithms involving specific change actions (i.e., to downgrade or upgrade according to the immediate past outcome): the Win-Downgrade/Lose-Stay (WDLS) or Win-Stay/Lose-Upgrade (WSLU) strategies. Experiment 2 used these strategies against a human player. Our findings show that participants followed a win-stay strategy against the WDLS algorithm and a lose-change strategy against the WSLU algorithm, while they had difficulty in using an upgrade/downgrade direction, suggesting humans' limited ability to detect and counter the actions of the algorithm. Taken together, our two experiments showed a large diversity of sequential strategies, where the win-stay/lose-change strategy did not describe the majority of human players' dynamic behaviors in this adversarial situation. [ABSTRACT FROM AUTHOR]

This paper proposes a cutting head optimization method based on meshing the spatial position of the picks. According to the expanded shape of the spatial mesh composed of four adjacent picks on the plane, a standard mesh shape analysis method can be established with mesh skewness, mesh symmetry, and mesh area ratio as the indicators. The traversal algorithm is used to calculate the theoretical meshing rate, pick rotation coefficient, and the variation of cutting load for the longitudinal cutting head with 2, 3, and 4 helices. The results show that the 3-helix longitudinal cutting head has better performance. By using the traversal result with maximum theoretical meshing rate as the design parameter, the longitudinal cutting head CH51 with 51 picks was designed and analyzed. The prediction model of pick consumption is established based on cutting speed, direct rock cutting volume of each pick, pick rotation coefficient, uniaxial compressive strength, and CERCHAR abrasivity index. And the rock with normal distribution characteristics of Uniaxial Compressive Strength is used for the specific energy calculating. The artificial rock wall cutting test results show that the reduction in height loss suppresses the increase in pick equivalent loss caused by the increase in mass loss, and the pick consumption in this test is only 0.037–0.054 picks/m3. In addition, the correlation between the actual pick consumption and the prediction model, and the correlation between the actual cutting specific energy and the theoretical calculation value are also analyzed. The research results show that the pick arrangement design method based on meshing pick tip spatial position can effectively reduce pick consumption and improve the rock cutting performance. [ABSTRACT FROM AUTHOR]