Search

To solve the problem of feature selection and error correction after mode decomposition and improve the ability of power load forecasting models to capture complex time series information, a two-stage short-term power load forecasting method based on recursive feature elimination with a cross validation (RFECV) algorithm and time convolution network–efficient channel attention mechanism–long short-term memory network (TCN–ECA–LSTM) is presented. First, the load sequence is decomposed into a relatively stable set of modal components using variational mode decomposition. Then, the RFECV-based method filters the feature set of each modal component to construct the best feature set. Finally, a two-stage prediction model based on TCN–ECA–LSTM is established. The first stage predicts each modal component and the second stage reconstructs the load forecast based on the predicted value of the previous stage. This paper takes actual data from New South Wales, Australia, as an example, and the results show that the method proposed in this paper can build the feature set reliably and efficiently and has a higher accuracy than the conventional prediction model. [ABSTRACT FROM AUTHOR]

Simple Summary: In radiotherapy treatment, organs at risk and target volumes are contoured by the clinicians to prepare a dosimetry plan. In retrospective data, these structures are not often standardised to universal names across the patients plans, which is required to enable data mining and analysis. In this paper, a new method was proposed and evaluated to automatically standardise radiotherapy structures names using machine learning algorithms. The proposed approach was deployed over a dataset with 1613 patients collected from Liverpool & Macarthur Cancer Therapy Centres, New South Wales, Australia. It was concluded that machine learning techniques can standardise the dosimetry plan structures, taking into consideration the integration of multiple modalities representing each structure during the training process. In progressing the use of big data in health systems, standardised nomenclature is required to enable data pooling and analyses. In many radiotherapy planning systems and their data archives, target volumes (TV) and organ-at-risk (OAR) structure nomenclature has not been standardised. Machine learning (ML) has been utilised to standardise volumes nomenclature in retrospective datasets. However, only subsets of the structures have been targeted. Within this paper, we proposed a new approach for standardising all the structures nomenclature by using multi-modal artificial neural networks. A cohort consisting of 1613 breast cancer patients treated with radiotherapy was identified from Liverpool & Macarthur Cancer Therapy Centres, NSW, Australia. Four types of volume characteristics were generated to represent each target and OAR volume: textual features, geometric features, dosimetry features, and imaging data. Five datasets were created from the original cohort, the first four represented different subsets of volumes and the last one represented the whole list of volumes. For each dataset, 15 sets of combinations of features were generated to investigate the effect of using different characteristics on the standardisation performance. The best model reported 99.416% classification accuracy over the hold-out sample when used to standardise all the nomenclatures in a breast cancer radiotherapy plan into 21 classes. Our results showed that ML based automation methods can be used for standardising naming conventions in a radiotherapy plan taking into consideration the inclusion of multiple modalities to better represent each volume. [ABSTRACT FROM AUTHOR]

Video-based human action recognition is currently one of the most active research areas in computer vision. Various research studies indicate that the performance of action recognition is highly dependent on the type of features being extracted and how the actions are represented. Since the release of the Kinect camera, a large number of Kinect-based human action recognition techniques have been proposed in the literature. However, there still does not exist a thorough comparison of these Kinect-based techniques under the grouping of feature types, such as handcrafted versus deep learning features and depth-based versus skeleton-based features. In this paper, we analyze and compare 10 recent Kinect-based algorithms for both cross-subject action recognition and cross-view action recognition using six benchmark datasets. In addition, we have implemented and improved some of these techniques and included their variants in the comparison. Our experiments show that the majority of methods perform better on cross-subject action recognition than cross-view action recognition, that the skeleton-based features are more robust for cross-view recognition than the depth-based features, and that the deep learning features are suitable for large datasets. [ABSTRACT FROM AUTHOR]

The objective of this paper is to assess whether existing pavement temperature prediction algorithms can be used to reliably determine Performance Grade (PG) design temperatures for Australian asphalt pavements. The results show good agreement between internationally and locally developed pavement temperature algorithms for the prediction of high pavement design temperature. There is more variability between models in the prediction of low pavement design temperature. The paper also provides a set of PG grading results for a range of Australian asphalt binders. The findings indicate that for a given design situation harder bitumen, ormore highly modified binder would be specified in Australia than in jurisdictions using the PG system. [ABSTRACT FROM AUTHOR]

This paper proposes a spatiotemporal clustering algorithm and its implementation in the R package spotoroo. This work is motivated by the catastrophic bushfires in Australia throughout the summer of 2019-2020 and made possible by the availability of satellite hotspot data. The algorithm is inspired by two existing spatiotemporal clustering algorithms but makes enhancements to cluster points spatially in conjunction with their movement across consecutive time periods. It also allows for the adjustment of key parameters, if required, for different locations and satellite data sources. Bushfire data from Victoria, Australia, is used to illustrate the algorithm and its use within the package. [ABSTRACT FROM AUTHOR]

The aim of this paper was to test the capabilities of the Sentinel-1 radar data in downscaling Soil Moisture Active Passive (SMAP) radiometer data for high-resolution soil moisture estimation. Three different active–passive downscaling algorithms, including the brightness temperature-based downscaling algorithm (BTBDA), the soil moisture-based downscaling algorithm (SMBDA), and a change detection method (CDM), were analyzed using pairs of Sentinel-1 active and SMAP passive observations collected over a semiarid landscape in southeastern Australia from May 2015 to May 2016. While these algorithms have been tested previously, this is the first study to evaluate the three algorithms using real Sentinel-1 radar and SMAP radiometer data. The SMAP passive observations were disaggregated to 9-, 3-, and 1-km scales and then compared with ground soil moisture measurements. The results suggest that the root-mean-square error (RMSE) in downscaled soil moisture at 9-km resolution was 0.057, 0.056, and 0.067 cm3/cm3 for the BTBDA, SMBDA, and CDM, respectively. The accuracy of downscaling methods was generally decreased when applied at the finer spatial resolution. The SMBDA had overall better performance in terms of correctly detecting the soil moisture pattern and relatively lower RMSE values, and is, therefore, recommended for the combined Sentinel-1 radar and SMAP radiometer setup for soil moisture monitoring. The influence of incidence angle normalization of Sentinel-1 SAR data on downscaled soil moisture was also investigated and found to be minimal. [ABSTRACT FROM AUTHOR]

Performance evaluation of multi-target tracking algorithms is of great practical importance in the design, parameter optimization and comparison of tracking systems. The goal of performance evaluation is to measure the distance between two sets of tracks: the ground truth tracks and the set of estimated tracks. This paper proposes a mathematically rigorous metric for this purpose. The basis of the proposed distance measure is the recently formulated consistent metric for performance evaluation of multi-target filters, referred to as the OSPA metric. Multi-target filters sequentially estimate the number of targets and their position in the state space. The OSPA metric is therefore defined on the space of finite sets of vectors. The distinction between filtering and tracking is that tracking algorithms output tracks and a track represents a labeled temporal sequence of state estimates, associated with the same target. The metric proposed in this paper is therefore defined on the space of finite sets of tracks and incorporates the labeling error. Numerical examples demonstrate that the proposed metric behaves in a manner consistent with our expectations. [ABSTRACT FROM PUBLISHER]

This paper presents and evaluates artificial neural network (ANN) models used for macrocell path-loss prediction. Measurement data obtained by utilizing the IS-95 pilot signal from a commercial code-division multiple-access (CDMA) mobile network in rural Australia are used to train and evaluate the models. A simple neuron model and feed-forward networks with different numbers of hidden layers and neurons are evaluated regarding their training time, prediction accuracy, and generalization properties. Furthermore, different backpropagation training algorithms, such as gradient descent and Levenberg--Marquardt, are evaluated. The artificial neural network inputs are chosen to be distance to base station, parameters easily obtained from terrain path profiles, land usage, and vegetation type and density near the receiving antenna. The path-loss prediction results obtained by using the ANN models are evaluated against different versions of the semi-terrain based propagation model Recommendation ITU-R P.1546 and the Okumura--Hata model. The statistical analysis shows that a non-complex ANN model performs very well compared with traditional propagation models with regard to prediction accuracy, complexity, and prediction time. The average ANN prediction results were 1) maximum error: 22 dB; 2) mean error: 0 dB; and 3) standard deviation: 7 dB. A multilayered feedforward network trained using the standard backpropagation algorithm was compared with a neuron model trained using the Levenberg--Marquardt algorithm. It was found that the training time decreases from 150 000 to 10 iterations, while the prediction accuracy is maintained. [ABSTRACT FROM AUTHOR]

Wildfires are one of the most destructive disasters on the planet. They also significantly impact the land surface. Satellite data have been widely used to detect the outbreak and monitor the expansion of fire incidents for damage assessment and disaster management. Polar-orbiting satellite data have been used for several decades but data from geostationary satellites, which can provide observations with a high temporal resolution, have received much less attention. This paper utilizes data from FengYun-2G, a Chinese geostationary satellite, to detect wildfires in two selected research regions in January 2016. The detection algorithm systemizes image-based analysis to filter out obvious nonfire pixels and temporal analysis to confirm the true detections. Fire detection is based on comparisons between predicted and observed values. The results show that the proposed method has some advantages compared with the use of polar-orbiting satellite data, including early detection and continuous observation. The validation work is conducted based on the collection 6.1 Global Monthly Fire Location Product generated from fire detections by Moderate Resolution Imaging Spectroradiometer (MODIS) sensors. The average accuracy within the target time is 56%, while the omission error rate is over 78%. In detail, the algorithm has a lower omission error rate in Australia while it fails in detecting most of the fire pixels in India. The dominance of small fire incidents, as well as low spatial resolution greatly limit the detection ability. Many small fires were beyond the ability of Stretched Visible and Infrared Spin Scan Radiometer (S-VISSR) data when no significant fire characteristics could be captured. Future development of the algorithm will focus on improving the results by enhancing the adaption to different regions, as well as, including multisource data sets. [ABSTRACT FROM AUTHOR]

Grass establishment on railway embankment steep slopes for erosion control in Central Queensland, Australia, is aided by drip lateral irrigation systems. The effective field values of the lateral parameters may be different from the manufacturer supplied ones due to manufacturing variations of the emitters, environmental factors, and water quality. This paper has provided a methodology for estimating drip lateral effective parameter values under field conditions. The hydraulic model takes into account the velocity head change and a proper selection of the friction coefficient formula based on the Reynolds number. Fittings and emitter insertion head losses were incorporated into the hydraulic model. Pressure measurements at some locations within the irrigation system, and the inlet discharges, were used to calibrate the lateral parameters in a statistical framework that allows estimation of parameter uncertainties using the Metropolis algorithm. It is observed that the manufacturer’s supplied parameters were significantly different from the calibrated ones, underestimating pressures within the irrigation system for a given inlet discharge, stressing the need for field testing. The parameter posterior distributions were found to be unimodal and nearly normally distributed. The emitter head loss coefficient distribution being very significant suggests the need to incorporate it into the hydraulic modeling. Although the example given in this paper relates to steep slopes, the methodologies are general and can be applied to any use of drip laterals. [ABSTRACT FROM AUTHOR]

Abstract: Evidence supporting the practice of skin‐to‐skin contact and breastfeeding soon after birth points to physiologic, social, and psychological benefits for both mother and baby. The 2009 revision of Step 4 of the WHO/UNICEF “Ten Steps to Successful Breastfeeding” elaborated on the practice of skin‐to‐skin contact between the mother and her newly born baby indicating that the practice should be “immediate” and “without separation” unless documented medically justifiable reasons for delayed contact or interruption exist. While in immediate, continuous, uninterrupted skin‐to‐skin contact with mother in the first hour after birth, babies progress through 9 instinctive, complex, distinct, and observable stages including self‐attachment and suckling. However, the most recent Cochrane review of early skin‐to‐skin contact cites inconsistencies in the practice; the authors found “inadequate evidence with respect to details … such as timing of initiation and dose.” This paper introduces a novel algorithm to analyse the practice of skin to skin in the first hour using two data sets and suggests opportunities for practice improvement. The algorithm considers the mother's Robson criteria, skin‐to‐skin experience, and Widström's 9 Stages. Using data from vaginal births in Japan and caesarean births in Australia, the algorithm utilizes data in a new way to highlight challenges to best practice. The use of a tool to analyse the implementation of skin‐to‐skin care in the first hour after birth illuminates the successes, barriers, and opportunities for improvement to achieving the standard of care for babies. Future application should involve more diverse facilities and Robson's classifications. [ABSTRACT FROM AUTHOR]

The national health insurance system in Australia records details on medical services and claims provided to its population. An effective method to the discovery of temporal behavioral patterns in the data set is proposed in this paper. The method consists of a two-step approach which is applied recursively to the data set. First, a clustering algorithm is used to segment the data into classes. Then, hidden Markov models are employed to find the underlying temporal behavioral patterns. These steps are applied recursively to features extracted from the data set until convergence. The main objective is to minimize the misclassification of patient profiles into various classes. This results in a hierarchical tree model consisting of a number of classes; each class groups similar patient temporal behavioral patterns together. The capabilities of the proposed method are demonstrated through the application to a subset of the Australian national health insurance data set. It is shown that the proposed method not only clusters data into various categories of interest, but it also automatically marks the periods in which similar temporal behavioral patterns occurred. [ABSTRACT FROM AUTHOR]

A novel canonical duality theory (CDT) is presented for solving general bilevel mixed integer nonlinear optimization governed by linear and quadratic knapsack problems. It shows that the challenging knapsack problems can be solved analytically in term of their canonical dual solutions. The existence and uniqueness of these analytical solutions are proved. NP-hardness of the knapsack problems is discussed. A powerful CDT algorithm combined with an alternative iteration and a volume reduction method is proposed for solving the NP-hard bilevel knapsack problems. Application is illustrated by benchmark problems in optimal topology design. The performance and novelty of the proposed method are compared with the popular commercial codes. [ABSTRACT FROM AUTHOR]

This paper investigates the effect of a carbon price on wholesale electricity prices and carbon-pass-through rates in the states comprising the Australian National Electricity Market (NEM). The methodology utilize an agent-based model, which contains many features salient to the NEM including intra-state and inter-state transmission branches, regional location of generators and load centres and accommodation of unit commitment features. The model uses a Direct Current Optimal Power Flow (DC OPF) algorithm to determine optimal dispatch of generation plant, power flows on transmission branches and wholesale prices. The results include sensitivity analysis of carbon prices on wholesale prices and carbon pass-through rates for different states within the NEM. [ABSTRACT FROM AUTHOR]

Background and purpose Joint Replacement Registries play a significant role in monitoring arthroplasty outcomes by publishing data on survivorship of individual prostheses or combinations of prostheses. The difference in outcomes can be device- or non-device-related, and these factors can be analyzed separately. Although registry data indicate that most prostheses have similar outcomes, some have a higher than anticipated rate of revision when compared to all other prostheses in their class. This report outlines how the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) has developed a method to report prostheses with a higher than expected rate of revision. These are referred to as 'outlier' prostheses. Material and methods Since 2004, the AOANJRR has developed a standardized process for identifying outliers. This is based on a 3-stage process consisting of an automated algorithm, an extensive analysis of individual prostheses or combinations by registry staff, and finally a meeting involving a panel from the Australian Orthopaedic Association Arthroplasty Society. Outlier prostheses are listed in the Annual Report as (1) identified but no longer used in Australia, (2) those that have been re-identified and that are still used, and (3) those that are being identified for the first time. Results 78 prostheses or prosthesis combinations have been identified as being outliers using this approach (AOANJRR 2011 Annual Report). In addition, 5 conventional hip prostheses were initially identified, but after further analysis no longer met the defined criteria. 1 resurfacing hip prosthesis was initially identified, subsequently removed from the list, and then re-identified the following year when further data were available. All unicompartmental and primary total knee prostheses identified as having a higher than expected rate of revision have continued to be re-identified. Interpretation It is important that registries use a transparent and accountable process to identify an outlier prosthesis. This paper describes the development, implementation, assessment, and impact of the approach used by the Australian Registry. [ABSTRACT FROM AUTHOR]

This paper presents and discusses the results of basic source finding tests in three dimensions (using spectroscopic data cubes) with duchamp, the standard source finder for the Australian Square Kilometre Array Pathfinder. For this purpose, we generated different sets of unresolved and extended Hi model sources. These models were then fed into duchamp, using a range of different parameters and methods provided by the software. The main aim of the tests was to study the performance of duchamp on sources with different parameters and morphologies and assess the accuracy of duchamp's source parametrisation. Overall, we find duchamp to be a powerful source finder capable of reliably detecting sources down to low signal-to-noise ratios and accurately measuring their position and velocity. In the presence of noise in the data, duchamp's measurements of basic source parameters, such as spectral line width and integrated flux, are affected by systematic errors. These errors are a consequence of the effect of noise on the specific algorithms used by duchamp for measuring source parameters in combination with the fact that the software only takes into account pixels above a given flux threshold and hence misses part of the flux. In scientific applications of duchamp these systematic errors would have to be corrected for. Alternatively, duchamp could be used as a source finder only, and source parametrisation could be done in a second step using more sophisticated parametrisation algorithms. This paper discusses the results of basic source finding tests with the duchamp source finder on different source models. We find duchamp to be a powerful source finder, capable of reliably detecting sources down to low signal-to-noise ratios. duchamp's measurements of basic source parameters, however, are affected by systematic errors. [ABSTRACT FROM AUTHOR]

Background: In Australia, many community service program data collections developed over the last decade, including several for aged care programs, contain a statistical linkage key (SLK) to enable derivation of client-level data. In addition, a common SLK is now used in many collections to facilitate the statistical examination of crossprogram use. In 2005, the Pathways in Aged Care (PIAC) cohort study was funded to create a linked aged care database using the common SLK to enable analysis of pathways through aged care services. Linkage using an SLK is commonly deterministic. The purpose of this paper is to describe an extended deterministic record linkage strategy for situations where there is a general person identifier (e.g. an SLK) and several additional variables suitable for data linkage. This approach can allow for variation in client information recorded on different databases. Methods: A stepwise deterministic record linkage algorithm was developed to link datasets using an SLK and several other variables. Three measures of likely match accuracy were used: the discriminating power of match key values, an estimated false match rate, and an estimated step-specific trade-off between true and false matches. The method was validated through examining link properties and clerical review of three samples of links. Results: The deterministic algorithm resulted in up to an 11% increase in links compared with simple deterministic matching using an SLK. The links identified are of high quality: validation samples showed that less than 0.5% of links were false positives, and very few matches were made using non-unique match information (0.01%). There was a high degree of consistency in the characteristics of linked events. Conclusions: The linkage strategy described in this paper has allowed the linking of multiple large aged care service datasets using a statistical linkage key while allowing for variation in its reporting. More widely, our deterministic algorithm, based on statistical properties of match keys, is a useful addition to the linker's toolkit. In particular, it may prove attractive when insufficient data are available for clerical review or follow-up, and the researcher has fewer options in relation to probabilistic linkage. [ABSTRACT FROM AUTHOR]

To increase data availability and accuracy in the coastal zone, especially in the last 5 km to the coast, we present a SCMR (Seamless Combination of Multiple Retrackers) processing strategy to combine sea surface height (SSH) estimates from waveform retrackers of SGDR MLE4, ALES, WLS3 and MB4 for Jason-3 and Saral missions, and of SAMOSA and SAMOSA+ for Sentinel-3A mission in the Australian coastal zone. The SCMR does not require the waveform classification result. It includes two steps: (1) estimating and removing the SSH bias due mainly to the significant wave height (SWH) difference-dependent height differences, and (2) determining the optimal along-track SSH profile by using the Dijkstra algorithm. In the study region, the results show that the SCMR increases the data availability by up to 15% in the last 5 km to the coast and reduces the noise level by 28–34% at the spatial scales < 2.5 km. The validation results against tide gauges show that SCMR-derived SSH estimates achieve a better accuracy than that from any single retracker, with the improvement percentage of 6.26% and 4.94% over 0–10 km and 20–100 km distance bands, respectively. [ABSTRACT FROM AUTHOR]

Background and Objectives: Current practices and available resources for nutrition therapy in paediatric intensive care units (PICUs) in the Asia Pacific-Middle East region are expected to differ from western countries. Existing guidelines for nutrition management in critically ill children may not be directly applicable in this region. This paper outlines consensus statements developed by the Asia Pacific-Middle East Consensus Working Group on Nutrition Therapy in the Paediatric Critical Care Environment. Challenges and recommendations unique to the region are described.Methods and Study Design: Following a systematic literature search from 2004-2014, consensus statements were developed for key areas of nutrient delivery in the PICU. This review focused on evidence applicable to the Asia Pacific-Middle East region. Quality of evidence and strength of recommendations were rated according to the Grading of Recommendation Assessment, Development and Evaluation approach.Results: Enteral nutrition (EN) is the preferred mode of nutritional support. Feeding algorithms that optimize EN should be encouraged and must include: assessment and monitoring of nutritional status, selection of feeding route, time to initiate and advance EN, management strategies for EN intolerance and indications for using parenteral nutrition (PN). Despite heterogeneity in nutritional status of patients, availability of resources and diversity of cultures, PICUs in the region should consider involvement of dieticians and/or nutritional support teams.Conclusions: Robust evidence for several aspects of optimal nutrition therapy in PICUs is lacking. Nutritional assessment must be implemented to document prevalence and impact of malnutrition. Nutritional support must be given greater priority in PICUs, with particular emphasis in optimizing EN delivery. [ABSTRACT FROM AUTHOR]

Background: Assessment of occupational exposures is an integral component of population-based studies investigating the epidemiology of occupational diseases. However, all the available methods for exposure assessment have been developed, tested and used in high-income countries. Except for a few studies examining pesticide exposures, there is limited research on whether these methods are appropriate for assessing exposure in LMICs. The aim of this study is to compare a task-specific algorithm-based method (OccIDEAS) to a job-specific matrix method (OAsJEM) in the assessment of asthmagen exposures among healthcare workers in a high-income country and a low- and middle- income country (LMIC) to determine an appropriate assessment method for use in LMICs for future research.Methods: Data were obtained from a national cross-sectional survey of occupational asthmagens exposure in Australia and a cross-sectional survey of occupational chemical exposure among Bhutanese healthcare workers. Exposure was assessed using OccIDEAS and the OAsJEM. Prevalence of exposure to asthmagens and inter-rater agreement were calculated.Results: In Australia, the prevalence was higher for a majority of agents when assessed by OccIDEAS than by the OAsJEM (13 versus 3). OccIDEAS identified exposures to a greater number of agents (16 versus 7). The agreement as indicated by κ (Cohen's Kappa coefficient) for six of the seven agents assessed was poor to fair (0.02 to 0.37). In Bhutan, the prevalence of exposure assessed by OccIDEAS was higher for four of the seven agents and κ was poor for all the four agents assessed (-0.06 to 0.13). The OAsJEM overestimated exposures to high-level disinfectants by assigning exposures to all participants from 10 (Bhutan) and 12 (Australia) ISCO-88 codes; whereas OccIDEAS assigned exposures to varying proportions of participants from these ISCO-codes.Conclusion: There was poor to fair agreement in the assessment of asthmagen exposure in healthcare workers between the two methods. The OAsJEM overestimated the prevalence of certain exposures. As compared to the OAsJEM, OccIDEAS appeared to be more appropriate for evaluating cross-country exposures to asthmagens in healthcare workers due to its inherent quality of assessing task-based determinants and its versatility in being adaptable for use in different countries with different exposure circumstances. [ABSTRACT FROM AUTHOR]

The prediction of future drought is an effective mitigation tool for assessing adverse consequences of drought events on vital water resources, agriculture, ecosystems and hydrology. Data-driven model predictions using machine learning algorithms are promising tenets for these purposes as they require less developmental time, minimal inputs and are relatively less complex than the dynamic or physical model. This paper authenticates a computationally simple, fast and efficient non-linear algorithm known as extreme learning machine (ELM) for the prediction of Effective Drought Index (EDI) in eastern Australia using input data trained from 1957–2008 and the monthly EDI predicted over the period 2009–2011. The predictive variables for the ELM model were the rainfall and mean, minimum and maximum air temperatures, supplemented by the large-scale climate mode indices of interest as regression covariates, namely the Southern Oscillation Index, Pacific Decadal Oscillation, Southern Annular Mode and the Indian Ocean Dipole moment. To demonstrate the effectiveness of the proposed data-driven model a performance comparison in terms of the prediction capabilities and learning speeds was conducted between the proposed ELM algorithm and the conventional artificial neural network (ANN) algorithm trained with Levenberg–Marquardt back propagation. The prediction metrics certified an excellent performance of the ELM over the ANN model for the overall test sites, thus yielding Mean Absolute Errors, Root-Mean Square Errors, Coefficients of Determination and Willmott's Indices of Agreement of 0.277, 0.008, 0.892 and 0.93 (for ELM) and 0.602, 0.172, 0.578 and 0.92 (for ANN) models. Moreover, the ELM model was executed with learning speed 32 times faster and training speed 6.1 times faster than the ANN model. An improvement in the prediction capability of the drought duration and severity by the ELM model was achieved. Based on these results we aver that out of the two machine learning algorithms tested, the ELM was the more expeditious tool for prediction of drought and its related properties. [ABSTRACT FROM AUTHOR]

Regional flood frequency analysis (RFFA) is widely used to estimate design floods in ungauged catchments. Both linear and non-linear methods are adopted in RFFA. The development of the non-linear RFFA method Adaptive Neuro-fuzzy Inference System (ANFIS) using data from 181 gauged catchments in south-eastern Australia is presented in this study. Three different types of ANFIS models, Fuzzy C-mean (FCM), Subtractive Clustering (SC), and Grid Partitioning (GP) were adopted, and the results were compared with the Quantile Regression Technique (QRT). It was found that FCM performs better (with relative error (RE) values in the range of 38–60%) than the SC (RE of 44–69%) and GP (RE of 42–78%) models. The FCM performs better for smaller to medium ARIs (2 to 20 years) (ARI of five years having the best performance), and in New South Wales, over Victoria. In many aspects, the QRT and FCM models perform very similarly. These developed RFFA models can be used in south-eastern Australia to derive more accurate flood quantiles. The developed method can easily be adapted to other parts of Australia and other countries. The results of this study will assist in updating the Australian Rainfall Runoff (national guide)-recommended RFFA technique. [ABSTRACT FROM AUTHOR]

Abstract: Fire danger indices are used by fire management agencies to assess fire weather conditions and issue public warnings. The most widely used fire danger indices in Australia are the McArthur Fire Forest Danger Index and the Grassland Fire Danger Index. These indices are calculated at weather stations using measurements of weather variables and fuel information. For a vast country like Australia when assessing the risk of severe fire weather events, it is also important to calculate the spatial distribution of these indices considering the extreme tail of the distribution. The spatial distribution of one of the fire weather danger indices regularly used in Australia is presented in this paper. In particular, we present the spatial distribution of the long-term tendency of extreme values of the McArthur Forest Fire Danger Index (FFDI). This indicator of fire weather conditions was assessed by calculating the return period of its extreme values by fitting extreme value distributions to data sets of FFDI at 78 recording stations around Australia. The spatial distribution of these return periods was obtained by using spatial interpolation algorithms with the recording stations measurements. Two conventional and two new algorithms based on machine-learning techniques were tested. This study shows that the best interpolation results for the FFDI can be obtained by using a combination of random forest and inverse distance weighting interpolation algorithms. The spatial distribution of the seasonal FFDI return period shows that the highest FFDI over large parts of southern Australia occurs during the summer months whilst in northern Australia it occurs in spring. The results also show that the FFDI in eastern Australia, the most populated region of the country, is higher inland than in the coastal areas particularly during spring and summer. [Copyright &y& Elsevier]

The spectral line datacubes obtained from the Square Kilometre Array (SKA) and its precursors, such as the Australian SKA Pathfinder (ASKAP), will be sufficiently large to necessitate automated detection and parametrisation of sources. Matched filtering is widely acknowledged as the best possible method for the automated detection of sources. This paper presents the Characterised Noise Hi (cnhi) source finder, which employs a novel implementation of matched filtering. This implementation is optimised for the 3-D nature of the Hi spectral line observations of the planned Wide-field ASKAP Legacy L-band All-sky Blind surveY (WALLABY). The cnhi source finder also employs a novel sparse representation of 3-D objects, with a high compression rate, to implement the Lutz one-pass algorithm on datacubes that are too large to process in a single pass. WALLABY will use ASKAP's phenomenal 30 square degree field of view to image ~70% of the sky. It is expected that WALLABY will find 500 000 Hi galaxies out to z ~ 0.2. The Characterised Noise Hi source finder uses a novel approach to find sources in Hi spectral line datacubes using matched filtering. The concept, initial implementation and testing are presented here. [ABSTRACT FROM AUTHOR]

ABSTRACT We present a detailed analysis of four of the most widely used radio source-finding packages in radio astronomy, and a program being developed for the Australian Square Kilometer Array Pathfinder telescope. The four packages: sextractor, sfind, imsad and selavy are shown to produce source catalogues with high completeness and reliability. In this paper we analyse the small fraction (∼1 per cent) of cases in which these packages do not perform well. This small fraction of sources will be of concern for the next generation of radio surveys which will produce many thousands of sources on a daily basis, in particular for blind radio transients surveys. From our analysis we identify the ways in which the underlying source-finding algorithms fail. We demonstrate a new source-finding algorithm aegean, based on the application of a Laplacian kernel, which can avoid these problems and can produce complete and reliable source catalogues for the next generation of radio surveys. [ABSTRACT FROM AUTHOR]

The equivalent source technique is a powerful and widely used method for processing gravity and magnetic data. Nevertheless, its major drawback is the large computational cost in terms of processing time and computer memory. We present two techniques for reducing the computational cost of equivalent source processing: block-averaging source locations and the gradient-boosted equivalent source algorithm. Through block-averaging, we reduce the number of source coefficients that must be estimated while retaining the minimum desired resolution in the final processed data. With the gradient-boosting method, we estimate the sources coefficients in small batches along overlapping windows, allowing us to reduce the computer memory requirements arbitrarily to conform to the constraints of the available hardware. We show that the combination of block-averaging and gradient-boosted equivalent sources is capable of producing accurate interpolations through tests against synthetic data. Moreover, we demonstrate the feasibility of our method by gridding a gravity data set covering Australia with over 1.7 million observations using a modest personal computer. [ABSTRACT FROM AUTHOR]

In this article, a continuous terminal sliding mode control algorithm is proposed for servo motor systems. A novel full-order terminal sliding mode surface is proposed based on the bilimit homogeneous property, such that the sliding motion is finite-time stable independent of the system's initial condition. A new continuous terminal sliding mode control algorithm is proposed to guarantee that the system states reach the sliding surface in finite-time. Not only the robustness is guaranteed by the proposed controller but also the continuity makes the control algorithm more suitable for the servo mechanical systems. Finally, a numerical example is presented to depict the advantages of the proposed control algorithm. An application in the rotary servo system is done to validate the effectiveness of the proposed control strategy. [ABSTRACT FROM AUTHOR]

Australian northwest cloudbands (NWCBs) are continental-scale bands of continuous cloud that stretch from northwest to southeast Australia. In earlier studies, where the characteristics of NWCBs and their relationship with precipitation were identified from satellite imagery, there was considerable uncertainty in the results due to limited quality and availability of data. The present study identifies NWCBs from 31 years of satellite data using a pattern-matching algorithm. This new climatology is the longest record based entirely on observations. Our findings include a strong annual cycle in NWCB frequency, with a summer maximum and winter minimum, and a statistically significant increase in annual NWCB days over the period 1984–2014. Physical mechanisms responsible for NWCB occurrences are explored to determine whether there is a fundamental difference between summer and winter NWCBs as hypothesized in earlier studies. Composite analyses are used to reveal that a key difference between these is their genesis mechanisms. Whereas summer NWCBs are triggered by cyclonic disturbances, winter NWCBs tend to form when meridional sea surface temperature gradients trigger baroclinic instability. It was also found that while precipitation is enhanced over parts of Australia during a cloudband day, it is reduced in other regions. During a cloudband day, precipitation extremes are more likely over northwest, central, and southeast Australia, while the probability of extreme precipitation decreases in northeast and southwest Australia. Additionally, cold fronts and NWCBs can interact, leading to enhanced rainfall over Australia. [ABSTRACT FROM AUTHOR]

Introduction: The detection of harmful alcohol use and the delivery of brief advice in primary care are less than optimal. Given limited health care resources, deciding where best to allocate funding to optimize health outcomes is imperative. A simple data-based tool could be useful when access to specialist health economic advice is unavailable. This study aimed to examine the utility of a simple data-based calculator to facilitate priority setting in general practice for reducing alcohol-related harm.Methods: A simple algorithm was developed within Microsoft Excel to allow comparison of hypothetical intervention scenarios that aimed to increase detection and brief advice for harmful alcohol use in general practice. The calculator accommodated varying implementation costs, size of effect and reach for each scenario created. The incremental costs of the intervention scenarios, the incremental number of successes (i.e. abstinence or drinking at safe levels) and the incremental costs-effectiveness ratio (ICER) were calculated for each hypothetical scenario and compared with a usual care scenario.Results: In the hypothetical scenarios modelled, increasing both the detection of harmful alcohol consumption and the provision of brief advice produced the greatest number of incremental successes above baseline. Increasing detection alone produced fewer incremental successes but was the most cost-effective approach, as indicated by the lowest ICER.Discussion: The data-based calculator provides a simple method of exploring reach and cost-effectiveness outcomes without the need for any specific skills. Although this approach has limitations, the calculator can be used by decision makers to guide intervention planning. [ABSTRACT FROM AUTHOR]

This study cross validates the radar reflectivity Z; the rainfall drop size distribution parameter (median volume diameter Do); and the rainfall rate R estimated from the Tropical Rainfall Measuring Mission (TRMM) satellite Precipitation Radar (PR), a combined PR and TRMM Microwave Imager (TMI) algorithm (COM), and a C-band dual-polarized ground radar (GR) for TRMM overpasses during the passage of tropical cyclone (TC) and non-TC events over Darwin, Australia. Two overpass events during the passage of TC Carlos and 11 non-TC overpass events are used in this study, and the GR is taken as the reference. It is shown that the correspondence is dependent on the precipitation type whereby events with more (less) stratiform rainfall usually have a positive (negative) bias in the reflectivity and the rainfall rate, whereas in the Do the bias is generally positive but small (large). The COM reflectivity estimates are similar to the PR, but it has a smaller bias in the Do for most of the greater stratiform events. This suggests that combining the TMI with the PR adjusts the Do toward the "correct" direction if the GR is taken as the reference. Moreover, the association between the TRMM estimates and the GR for the two TC events, which are highly stratiform in nature, is similar to that observed for the highly stratiform non-TC events (there is no significant difference), but it differs considerably from that observed for the majority of the highly convective non-TC events. [ABSTRACT FROM AUTHOR]

With incomplete data, the "missing at random" (MAR) assumption is widely understood to enable unbiased estimation with appropriate methods. While the need to assess the plausibility of MAR and to perform sensitivity analyses considering "missing not at random" (MNAR) scenarios has been emphasized, the practical difficulty of these tasks is rarely acknowledged. With multivariable missingness, what MAR means is difficult to grasp, and in many MNAR scenarios unbiased estimation is possible using methods commonly associated with MAR. Directed acyclic graphs (DAGs) have been proposed as an alternative framework for specifying practically accessible assumptions beyond the MAR-MNAR dichotomy. However, there is currently no general algorithm for deciding how to handle the missing data given a specific DAG. Here we construct "canonical" DAGs capturing typical missingness mechanisms in epidemiologic studies with incomplete data on exposure, outcome, and confounding factors. For each DAG, we determine whether common target parameters are "recoverable," meaning that they can be expressed as functions of the available data distribution and thus estimated consistently, or whether sensitivity analyses are necessary. We investigate the performance of available-case and multiple-imputation procedures. Using data from waves 1–3 of the Longitudinal Study of Australian Children (2004–2008), we illustrate how our findings can guide the treatment of missing data in point-exposure studies. [ABSTRACT FROM AUTHOR]

Background: Missing data is a common problem in epidemiological studies, and is particularly prominent in longitudinal data, which involve multiple waves of data collection. Traditional multiple imputation (MI) methods (fully conditional specification (FCS) and multivariate normal imputation (MVNI)) treat repeated measurements of the same time-dependent variable as just another 'distinct' variable for imputation and therefore do not make the most of the longitudinal structure of the data. Only a few studies have explored extensions to the standard approaches to account for the temporal structure of longitudinal data. One suggestion is the two-fold fully conditional specification (two-fold FCS) algorithm, which restricts the imputation of a time-dependent variable to time blocks where the imputation model includes measurements taken at the specified and adjacent times. To date, no study has investigated the performance of two-fold FCS and standard MI methods for handling missing data in a time-varying covariate with a non-linear trajectory over time - a commonly encountered scenario in epidemiological studies.Methods: We simulated 1000 datasets of 5000 individuals based on the Longitudinal Study of Australian Children (LSAC). Three missing data mechanisms: missing completely at random (MCAR), and a weak and a strong missing at random (MAR) scenarios were used to impose missingness on body mass index (BMI) for age z-scores; a continuous time-varying exposure variable with a non-linear trajectory over time. We evaluated the performance of FCS, MVNI, and two-fold FCS for handling up to 50% of missing data when assessing the association between childhood obesity and sleep problems.Results: The standard two-fold FCS produced slightly more biased and less precise estimates than FCS and MVNI. We observed slight improvements in bias and precision when using a time window width of two for the two-fold FCS algorithm compared to the standard width of one.Conclusion: We recommend the use of FCS or MVNI in a similar longitudinal setting, and when encountering convergence issues due to a large number of time points or variables with missing values, the two-fold FCS with exploration of a suitable time window. [ABSTRACT FROM AUTHOR]

Background One of the strategies proven most successful in curbing rising rates of childhood obesity involves targeting parents as agents of change. Prior studies have focused on what messages to communicate, but few have investigated how they should be communicated. Objective To identify the channels most effective for communicating with parents of overweight and obese children and understand whether their use of parenting information sources differs from others in the community. Design/setting This study utilizes data from the Longitudinal Study of Australian Children ( LSAC). Families were included if weight and height information was available for parents and children at three data collection points: Waves 1, 2 and 4 (collected 2004, 2006 and 2010, respectively, n = 5107). Analysis A priori and a posteriori segmentation methods identified groups of parents that were similar in the sources used to obtain information about parenting, and examined whether some segments were more likely to have obese children. Results Four segments were identified that differed in their information source use: the 'personal networks', 'books', 'official sources' and 'mixed approach' segments. The 'official sources' and 'mixed approach' segments were most likely to have obese children, and they used doctors, government/community organizations and friends to obtain information on parenting. These segments were also less educated and had lower employment. Conclusions Messages are most likely to reach families with obese children if communicated through doctors, government publications and community organizations. Further, messages targeting social groupings of parents will leverage the power of advice from friends, which is another valuable information source for this group. [ABSTRACT FROM AUTHOR]

Background: Evidence-informed policymaking is more likely if organisations have cultures that promote research use and invest in resources that facilitate staff engagement with research. Measures of organisations' research use culture and capacity are needed to assess current capacity, identify opportunities for improvement, and examine the impact of capacity-building interventions. The aim of the current study was to develop a comprehensive system to measure and score organisations' capacity to engage with and use research in policymaking, which we entitled ORACLe (Organisational Research Access, Culture, and Leadership).Method: We used a multifaceted approach to develop ORACLe. Firstly, we reviewed the available literature to identify key domains of organisational tools and systems that may facilitate research use by staff. We interviewed senior health policymakers to verify the relevance and applicability of these domains. This information was used to generate an interview schedule that focused on seven key domains of organisational capacity. The interview was pilot-tested within four Australian policy agencies. A discrete choice experiment (DCE) was then undertaken using an expert sample to establish the relative importance of these domains. This data was used to produce a scoring system for ORACLe.Results: The ORACLe interview was developed, comprised of 23 questions addressing seven domains of organisational capacity and tools that support research use, including (1) documented processes for policymaking; (2) leadership training; (3) staff training; (4) research resources (e.g. database access); and systems to (5) generate new research, (6) undertake evaluations, and (7) strengthen relationships with researchers. From the DCE data, a conditional logit model was estimated to calculate total scores that took into account the relative importance of the seven domains. The model indicated that our expert sample placed the greatest importance on domains (2), (3) and (4).Conclusion: We utilised qualitative and quantitative methods to develop a system to assess and score organisations' capacity to engage with and apply research to policy. Our measure assesses a broad range of capacity domains and identifies the relative importance of these capacities. ORACLe data can be used by organisations keen to increase their use of evidence to identify areas for further development. [ABSTRACT FROM AUTHOR]

A number of antiviral agents used against Human Immunodeficiency Virus (HIV) infection and hepatitis B virus (HBV) mono or co-infection have been associated with real nephrotoxicity (including tenofovir disoproxil fumarate (TDF), atazanavir, indinavir and lopinavir) or apparent changes in renal function (e.g. cobicistat, ritonavir, rilpivirine and dolutegravir). Patients with HIV are at higher risk of acute and chronic renal dysfunction, so baseline assessment and ongoing monitoring of renal function is an important part of routine management of patients with HIV. Given the paucity of evidence in this area, we sought to establish a consensus view on how routine monitoring could be performed in Australian patients on ART regimens, especially those involving TDF. A group of nephrologists and prescribers (an HIV physician and a hepatologist) were assembled by Gilead to discuss practical and reasonable renal management strategies for patients particularly those on TDF-based combination regimens (in the case of those with HIV-infection) or on TDF-monotherapy (in the case of HBV-mono infection). The group considered which investigations should be performed as part of routine practice, their frequency, and when specialist renal referral is warranted. The algorithm presented suggests testing for serum creatinine along with plasma phosphate and an assessment of urinary protein (rather than albumin) and glucose. Here we advocate baseline tests of renal function at initiation of therapy. If creatinine excretion inhibitors (e.g. cobicistat or rilpivirine) are used as part of the ART regimen, we suggest creatinine is rechecked at 4 weeks and this value used as the new baseline. Repeat testing is suggested at 3-monthly intervals for a year and then at least yearly thereafter if no abnormalities are detected. In patients with abnormal baseline results, renal function assessment should be performed at least 6 monthly. In HBV mono-infected patients advocate that a similar testing protocol may be logical. [ABSTRACT FROM AUTHOR]

Study design:Cross-section design.Objectives:The development of reliable screen technology for predicting those at risk of depression in the long-term remains a challenge. The objective of this research was to determine factors that classify correctly adults with spinal cord injury (SCI) with depressed mood and to develop a diagnostic algorithm that could be applied for prediction of depressed mood in the long-term.Setting:SCI rehabilitation unit, rehabilitation outpatient clinic and Australian community.Methods:Participants included 107 adults with SCI. The assessment regimen included demographic and injury variables, negative mood states, pain intensity, health-related quality of life and self-efficacy. Participants were divided into those with 'normal' mood versus those with elevated depressed mood. Discriminant function analysis (DFA) was then used to isolate factors that in combination, best classify the presence or absence of depressed mood.Results:At the time of assessment, 24 participants (22.4%) had elevated depressed mood. DFA identified six factors that discriminated between those with depressed mood (P<0.01) and those with normal mood, explaining 61% of the variance. Factors consisted of pain intensity, mental health, emotional and social functioning, self-efficacy and fatigue. DFA correctly classified 91.7% (n=22 of 24) of those with depressed mood and 95.2% (n=79 of 83) of those without. Demographic, injury and physical health function variables were not found to discriminate depressed mood.Conclusion:Clinical implications of applying a diagnostic algorithm for detecting depression in adults with SCI are discussed. Prospective research is needed to test the predictive efficacy of the algorithm. [ABSTRACT FROM AUTHOR]

Background:Breast and Ovarian Analysis of Disease Incidence and Carrier Estimation Algorithm (BOADICEA) is a risk prediction algorithm that can be used to compute estimates of age-specific risk of breast cancer. It is uncertain whether BOADICEA performs adequately for populations outside the United Kingdom.Methods:Using a batch mode version of BOADICEA that we developed (BOADICEACentre), we calculated the cumulative 10-year invasive breast cancer risk for 4176 Australian women of European ancestry unaffected at baseline from 1601 case and control families in the Australian Breast Cancer Family Registry. Based on 115 incident breast cancers, we investigated calibration, discrimination (using receiver-operating characteristic (ROC) curves) and accuracy at the individual level.Results:The ratio of expected to observed number of breast cancers was 0.92 (95% confidence interval (CI) 0.76-1.10). The E/O ratios by subgroups of the participant's relationship to the index case and by the reported number of affected relatives ranged between 0.83 and 0.98 and all 95% CIs included 1.00. The area under the ROC curve was 0.70 (95% CI 0.66-0.75) and there was no evidence of systematic under- or over-dispersion (P=0.2).Conclusion:BOADICEA is well calibrated for Australian women, and had good discrimination and accuracy at the individual level. [ABSTRACT FROM AUTHOR]

A 9-yr dataset of continuous sea noise recording made at the Cape Leeuwin station of the Comprehensive Nuclear-Test-Ban Treaty hydroacoustic network in 2002-2010 was processed to detect calls from pygmy blue whales and to analyze diurnal, seasonal, and interannual variations in their vocal activity. Because the conventional spectrogram correlation method for recognizing whale calls in sea noise resulted in a too high false detection rate, alternative algorithms were tested and the most robust one applied to the multi-year dataset. The detection method was based on multivariate classification using two spectrogram features of transients in sea noise and Fisher's linear discriminant, which provided a misclassification rate of approximately 1% for missed and false detections at moderate sensitivity settings. An analysis of the detection results revealed a consistent seasonal pattern in the whale presence and considerable interannual changes with a steady increase in the number of calls detected in 2002-2006. An apparent diurnal pattern of whales' vocal activity was also observed. The acoustic detection range for pygmy blue whales was estimated to vary from about 50 km to nearly 200 km from the Cape Leeuwin station, depending on the ambient noise level, source level, and azimuth to a vocalizing whale. [ABSTRACT FROM AUTHOR]

The proposition that a relatively new technology such as a differential evolutionary algorithm (DEA) can violate the weak form of the efficient market hypothesis is tested using daily data from the Australian share market from 2000 until 2008. An option trading strategy based on forecasts from a DEA is shown to perform better than a buy and hold strategy over parts of the sample space and, on average, over all of it. Speculators may make supernormal profits using new methodologies however such profits are unlikely to be sustained. [ABSTRACT FROM AUTHOR]

Background: The Brown Marmorated Stink Bug (BMSB), Halyomorpha halys (Stål) (Hemiptera: Pentatomidae), native to Asia, is becoming an invasive species with a rapidly expanding range in North America and Europe. In the US, it is a household pest and also caused unprecedented damage to agriculture crops. Exploring its climatic limits and estimating its potential geographic distribution can provide critical information for management strategies. Methodology/Principals: We used direct climate comparisons to explore the climatic niche occupied by native and invasive populations of BMSB. Ecological niche modelings based on the native range were used to anticipate the potential distribution of BMSB worldwide. Conversely, niche models based on the introduced range were used to locate the original invasive propagates in Asia. Areas with high invasion potential were identified by two niche modeling algorithms (i.e., Maxent and GARP). Conclusions/Significance: Reduced dimensionality of environmental space improves native model transferability in the invade area. Projecting models from invasive population back to native distributional areas offers valuable information on the potential source regions of the invasive populations. Our models anticipated successfully the current disjunct distribution of BMSB in the US. The original propagates are hypothesized to have come from northern Japan or western Korea. High climate suitable areas at risk of invasion include latitudes between 30°-50° including northern Europe, northeastern North America, southern Australia and the North Island of New Zealand. Angola in Africa and Uruguay in South America also showed high climate suitability. [ABSTRACT FROM AUTHOR]

This article presents a brief survey of two-sided matching. We introduce the reader to the problem of two-sided matching in the context of the college admission model and explain two central requirements for a matching mechanism: stability and non-manipulability. We show how the frequently used 'Boston Mechanism' fails these key requirements and describe how an alternative, the Deferred Acceptance Algorithm, leads to stable matchings but fails to be non-manipulable in general. A third mechanism, the Top Trading Cycle, is efficient and non-manipulable when only one side of the match acts strategically. We also discuss some applications of matching theory. [ABSTRACT FROM AUTHOR]

The stable marriage problem is a well-known problem of matching men to women so that no man and woman who are not married to each other both prefer each other. Such a problem has a wide variety of practical applications, ranging from matching resident doctors, to hospitals to matching students to schools. A well-known algorithm to solve this problem is the Gale-Shapley algorithm, which runs in quadratic time in the number of men/women. It has been proven that stable marriage procedures can always be manipulated. Whilst the Gale-Shapley algorithm is computationally easy to manipulate, we prove that there exist stable marriage procedures which are NP-hard to manipulate. We also consider the relationship between voting theory and stable marriage procedures, showing that voting rules which are NP-hard to manipulate can be used to define stable marriage procedures which are themselves NP-hard to manipulate. Finally, we consider the issue that stable marriage procedures like Gale-Shapley favour one gender over the other, and we show how to use voting rules to make any stable marriage procedure gender neutral. [ABSTRACT FROM AUTHOR]

Background: Accurate predictions of species distributions are essential for climate change impact assessments. However the standard practice of using long-term climate averages to train species distribution models might mute important temporal patterns of species distribution. The benefit of using temporally explicit weather and distribution data has not been assessed. We hypothesized that short-term weather associated with the time a species was recorded should be superior to long-term climate measures for predicting distributions of mobile species. Methodology: We tested our hypothesis by generating distribution models for 157 bird species found in Australian tropical savannas (ATS) using modelling algorithm Maxent. The variable weather of the ATS supports a bird assemblage with variable movement patterns and a high incidence of nomadism. We developed "weather" models by relating climatic variables (mean temperature, rainfall, rainfall seasonality and temperature seasonality) from the three month, six month and one year period preceding each bird record over a 58 year period (1950-2008). These weather models were compared against models built using long-term (30 year) averages of the same climatic variables. Conclusions: Weather models consistently achieved higher model scores than climate models, particularly for wide-ranging, nomadic and desert species. Climate models predicted larger range areas for species, whereas weather models quantified fluctuations in habitat suitability across months, seasons and years. Models based on long-term climate averages overestimate availability of suitable habitat and species' climatic tolerances, masking species potential vulnerability to climate change. Our results demonstrate that dynamic approaches to distribution modelling, such as incorporating organism-appropriate temporal scales, improves understanding of species distributions. [ABSTRACT FROM AUTHOR]

Background: The SF36 Version 2 (SF36V2) is a revision of the SF36 Version 1, and is a widely used health status measure. It is important that guidelines for interpreting scores are available.Method: A population sample of Australians (n = 3015) weighted to achieve representativeness was administered the SF36V2. Comparisons between published US weights and sample derived weights were made, and Australian population norms computed and presented.Major Findings: Significant differences were observed on 7/8 scales and on the mental health summary scale. Possible causes of these findings may include different sampling and data collection procedures, demographic characteristics, differences in data collection time (1998 vs. 2004), differences in health status or differences in cultural perception of the meaning of health. Australian population norms by age cohort, gender and health status are reported by T-score as recommended by the instrument developers. Additionally, the proportions of cases within T-score deciles are presented and show there are important data distribution issues.Principal Conclusions: The procedures reported here may be used by other researchers where local effects are suspected. The population norms presented may be of interest. There are statistical artefacts associated with T-scores that have implications for how SF36V2 data are analysed and interpreted. [ABSTRACT FROM AUTHOR]

Increasing cost/price ratios in sugarcane production and the pressure to remain internationally competitive have forced Australian sugar mills to try to use their infrastructure more efficiently. Generating rosters for sugarcane harvesters manually is difficult because the mills have a large number of harvesters and tight capacities in the transportation facilities. The Cooperative Research Centre for Sustainable Sugar Production conducted a participatory research process with five mills in the Australian sugar industry to develop models to optimize harvester rosters. Embedded in the research process and underpinned by action learning was the development of a novel integer-programming model, its validation, and its implementation. The participatory research overcame barriers to implementation of the rosters produced by the model and allowed the five participating mills to realize benefits in terms of more efficient transport operations. [ABSTRACT FROM AUTHOR]

An atmospheric correction algorithm for medium-resolution satellite data over general water surfaces (open/coastal, estuarine and inland waters) has been assessed in Australian coastal waters. In situ measurements at four match-up sites were used with 21 Landsat 8 images acquired between 2014 and 2017. Three aerosol sources (AERONET, MODIS ocean aerosol and climatology) were used to test the impact of the selection of aerosol optical depth (AOD) and Ångström coefficient on the retrieved accuracy. The initial results showed that the satellite-derived water-leaving reflectance can have good agreement with the in situ measurements, provided that the sun glint is handled effectively. Although the AERONET aerosol data performed best, the contemporary satellite-derived aerosol information from MODIS or an aerosol climatology could also be as effective, and should be assessed with further in situ measurements. Two sun glint correction strategies were assessed for their ability to remove the glint bias. The most successful one used the average of two shortwave infrared (SWIR) bands to represent sun glint and subtracted it from each band. Using this sun glint correction method, the mean all-band error of the retrieved water-leaving reflectance at the Lucinda Jetty Coastal Observatory (LJCO) in north east Australia was close to 4% and unbiased over 14 acquisitions. A persistent bias in the other strategy was likely due to the sky radiance being non-uniform for the selected images. In regard to future options for an operational sun glint correction, the simple method may be sufficient for clear skies until a physically based method has been established. [ABSTRACT FROM AUTHOR]

In this study we present the retrieval of the column-averaged dry air mole fraction of carbon dioxide (XCO2) from the TanSat observations using the ACOS (Atmospheric CO2 Observations from Space) algorithm. The XCO2 product has been validated with collocated ground-based measurements from the Total Carbon Column Observing Network (TCCON) for 2 years of TanSat data from 2017 to 2018. Based on the correlation of the XCO2 error over land with goodness of fit in three spectral bands at 0.76, 1.61 and 2.06 μm, we applied an a posteriori bias correction to TanSat retrievals. For overpass averaged results, XCO2 retrievals show a standard deviation (SD) of ~2.45 ppm and a positive bias of ~0.27 ppm compared to collocated TCCON sites. The validation also shows a relatively higher positive bias and variance against TCCON over high-latitude regions. Three cases to evaluate TanSat target mode retrievals are investigated, including one field campaign at Dunhuang with measurements by a greenhouse gas analyzer deployed on an unmanned aerial vehicle and two cases with measurements by a ground-based Fourier-transform spectrometer in Beijing. The results show the retrievals of all footprints, except footprint-6, have relatively low bias (within ~2 ppm). In addition, the orbital XCO2 distributions over Australia and Northeast China between TanSat and the second Orbiting Carbon Observatory (OCO-2) on 20 April 2017 are compared. It shows that the mean XCO2 from TanSat is slightly lower than that of OCO-2 with an average difference of ~0.85 ppm. A reasonable agreement in XCO2 distribution is found over Australia and Northeast China between TanSat and OCO-2. [ABSTRACT FROM AUTHOR]