Search

The removal of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) from solid matrices has received considerable attention because of the environmental persistence, bioaccumulation, and potential toxicity of these compounds. This study presents a simple method using concentrated HNO(3) as a suppression agent, and methanol-modified supercritical carbon dioxide (Sc-CO(2)) extraction for removing PFOS and PFOA from solid matrices. The optimal conditions were 16 M HNO(3) and 20% (v/v) methanol containing Sc-CO(2), under a pressure of 20.3 MPa and a temperature of 50 °C. Extraction time was set at 70 min (40 min for static and 30 min for dynamic extraction). PFOA and PFOS were identified and quantitated by liquid chromatography/mass spectrometry. The extraction efficiencies (with double extractions) were close to 100% for PFOA and 80% for PFOS for both paper and fabric matrices. The extraction efficiencies for sand were approximately 77% for PFOA and 59% for PFOS. The results show that this method is accurate, and effective, and that it provides a promising and convenient approach to remediate the environment of hazardous PFOA and PFOS contamination., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Paper, a cheap and ubiquitous material, has great potential to be used as low-cost, portable and biodegradable platform for chemical and biological sensing application. In this paper, we are exploring a low-cost, flexible and reliable method to effectively pattern paper for capturing optical dyes and for flow-based delivery of target samples for colorimetric chemical sensing. In this paper, we target the detection of ammonia (NH3) and carbon dioxide (CO2), two of the important environmental and health biomarkers. By functionalizing the paper platform with diverse cross-reactive dyes sensitive to NH3 and CO2, their selective sensing within a certain pH range, as well as their detection at different concentrations can be achieved. The images of paper based device were captured by a flatbed scanner and processed in MATLAB(®) using a RGB model and PCA for quantitative analysis. Paper based devices with readout using ubiquitous consumer electronic devices (e.g. smartphones, flatbed scanner) are considered promising approaches for disease screening in developing countries with limited resources., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This paper examines the impact of the CO2 laser parameters on the tensile strength, which is one of the most important properties of paper packaging in the process of cutting paper material. The study was performed on a paper material sample Fbb Board/Ningbo Spark C1S Ivory Board by examination of the influence of four independent variables: paper material grammage, cutting speed, laser power, and resolution on the tensile strength by using definitive screening design. Optimum process conditions of four variables that maximize the tensile strength were predicted and validated accordingly. Results confirm that laser power, paper material grammage, and cutting speed are the main process parameters that mostly affect the tensile strength. Besides individual parameters, two statistically significant interactions were obtained: laser power and cutting speed, and cutting speed and laser resolution. Maximum tensile strength values (20.37 N/mm) were achieved using the laser power of 60.6%, cutting speed of 3.24%, resolution of 2500 Hz, and a paper material grammage of 326.85 g/m2. With laser power at middle values and at a lower speed, a maximum tensile strength value can be obtained. Increasing the laser power and cutting speed will produce a slight lowering of tensile strength. [ABSTRACT FROM AUTHOR]

There is concern that the carbon prices generated through climate policies are too low to create the incentives necessary to stimulate technological development. This paper empirically analyzes how the Swedish carbon dioxide (CO2) tax and the European Union emission trading system (EU ETS) have affected productivity development in the Swedish pulp and paper industry 1998-2008. A Luenberger total factor productivity (TFP) indicator is computed using data envelopment analysis. The results show that climate policy had a modest impact on technological development in the pulp and paper industry, and if significant it was negative. The price of fossil fuels, on the contrary, seems to have created important incentives for technological development. Hence, the results suggest that the carbon prices faced by the industry through EU ETS and the CO2 tax have been too low. Even though the data for this study is specific for Sweden, the models and results are applicable internationally. When designing policy to mitigate CO2 emissions, it is vital that the policy creates a carbon price that is high enough - otherwise the pressure on technological development will not be sufficiently strong., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Fossil fuels-coal, oil and gas-supply most of the world's energy and also form the basis of many products essential for everyday life. Their use is the largest contributor to the carbon dioxide emissions that drive global climate change, prompting joint efforts to find renewable alternatives that might enable a carbon-neutral society by as early as 2050. There are clear paths for renewable electricity to replace fossil-fuel-based energy, but the transport fuels and chemicals produced in oil refineries will still be needed. We can attempt to close the carbon cycle associated with their use by electrifying refinery processes and by changing the raw materials that go into a refinery from fossils fuels to carbon dioxide for making hydrocarbon fuels and to agricultural and municipal waste for making chemicals and polymers. We argue that, with sufficient long-term commitment and support, the science and technology for such a completely fossil-free refinery, delivering the products required after 2050 (less fuels, more chemicals), could be developed. This future refinery will require substantially larger areas and greater mineral resources than is the case at present and critically depends on the capacity to generate large amounts of renewable energy for hydrogen production and carbon dioxide capture., (© 2024. Springer Nature Limited.)

Flexible calcium carbonate (FCC) was developed as a functional papermaking filler for high loaded paper, which was a fiber-like shaped calcium carbonate produced from the in situ carbonation process on the cellulose micro-or nanofibril surface. Chitin is the second most abundant renewable material after cellulose. In this study, a chitin microfibril was utilized as the fibril core for making the FCC. Cellulose fibrils for the preparation of FCC were obtained by fibrillation of the TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical) treated wood fibers. The chitin fibril was obtained from the β-chitin from the born of squid fibrillated in water by grinding. Both fibrils were mixed with calcium oxide and underwent a carbonation process by the addition of carbon dioxide, thus the calcium carbonate attached on the fibrils to make FCC. When used in papermaking, both the FCC from chitin and cellulose gave a much higher bulk and tensile strength simultaneously than the conventional papermaking filler of ground calcium carbonate, while maintaining the other essential properties of paper. The FCC from chitin caused an even higher bulk and higher tensile strength than those of the FCC from cellulose in paper materials. Furthermore, the simple preparation method of the chitin FCC in comparison with the cellulose FCC may enable a reduction in the use of wood fibers, process energy, and the production cost of paper materials. [ABSTRACT FROM AUTHOR]

Gene expression responses of paper birch (Betula papyrifera) leaves to elevated concentrations of CO(2) and O(3) were studied with microarray analyses from three time points during the summer of 2004 at Aspen FACE. Microarray data were analyzed with clustering techniques, self-organizing maps, K-means clustering and Sammon's mappings, to detect similar gene expression patterns within sampling times and treatments. Most of the alterations in gene expression were caused by O(3), alone or in combination with CO(2). O(3) induced defensive reactions to oxidative stress and earlier leaf senescence, seen as decreased expression of photosynthesis- and carbon fixation-related genes, and increased expression of senescence-associated genes. The effects of elevated CO(2) reflected surplus of carbon that was directed to synthesis of secondary compounds. The combined CO(2)+O(3) treatment resulted in differential gene expression than with individual gas treatments or in changes similar to O(3) treatment, indicating that CO(2) cannot totally alleviate the harmful effects of O(3)., (2009 Elsevier Ltd. All rights reserved.)

We studied the effects of long-term exposure (nine years) of birch (Betula papyrifera) trees to elevated CO(2) and/or O(3) on reproduction and seedling development at the Aspen FACE (Free-Air Carbon Dioxide Enrichment) site in Rhinelander, WI. We found that elevated CO(2) increased both the number of trees that flowered and the quantity of flowers (260% increase in male flower production), increased seed weight, germination rate, and seedling vigor. Elevated O(3) also increased flowering but decreased seed weight and germination rate. In the combination treatment (elevated CO(2)+O(3)) seed weight is decreased (20% reduction) while germination rate was unaffected. The evidence from this study indicates that elevated CO(2) may have a largely positive impact on forest tree reproduction and regeneration while elevated O(3) will likely have a negative impact.

We investigated the interactive effects of elevated concentrations of carbon dioxide ([CO(2)]) and ozone ([O(3)]) on radial growth, wood chemistry and structure of five 5-year-old trembling aspen (Populus tremuloides Michx.) clones and the wood chemistry of paper birch (Betula papyrifera Marsh.). Material for the study was collected from the Aspen FACE (free-air CO(2) enrichment) experiment in Rhinelander, WI, where the saplings had been exposed to four treatments: control, elevated [CO(2)] (560 ppm), elevated [O(3)] (1.5 x ambient) and their combination for five growing seasons. Wood properties of both species were altered in response to exposure to the treatments. In aspen, elevated [CO(2)] decreased uronic acids (constituents of, e.g., hemicellulose) and tended to increase stem diameter. In response to elevated [O(3)] exposure, acid-soluble lignin concentration decreased and vessel lumen diameter tended to decrease. Elevated [O(3)] increased the concentration of acetone-soluble extractives in paper birch, but tended to decrease the concentration of these compounds in aspen. In paper birch, elevated [CO(2)] decreased and elevated [O(3)] increased starch concentration. The responses of wood properties to 5 years of fumigation differed from those previously reported after 3 years of fumigation.

Atmospheric CO2 and tropospheric O3 are rising in many regions of the world. Little is known about how these two commonly co-occurring gases will affect reproductive fitness of important forest tree species. Here, we report on the long-term effects of CO2 and O3 for paper birch seedlings exposed for nearly their entire life history at the Aspen FACE (Free Air Carbon Dioxide Enrichment) site in Rhinelander, WI. Elevated CO2 increased both male and female flower production, while elevated O3 increased female flower production compared to trees in control rings. Interestingly, very little flowering has yet occurred in combined treatment. Elevated CO2 had significant positive effect on birch catkin size, weight, and germination success rate (elevated CO2 increased germination rate of birch by 110% compared to ambient CO2 concentrations, decreased seedling mortality by 73%, increased seed weight by 17%, increased root length by 59%, and root-to-shoot ratio was significantly decreased, all at 3 weeks after germination), while the opposite was true of elevated O3 (elevated O3 decreased the germination rate of birch by 62%, decreased seed weight by 25%, and increased root length by 15%). Under elevated CO2, plant dry mass increased by 9 and 78% at the end of 3 and 14 weeks, respectively. Also, the root and shoot lengths, as well as the biomass of the seedlings, were increased for seeds produced under elevated CO2, while the reverse was true for seedlings from seeds produced under the elevated O3. Similar trends in treatment differences were observed in seed characteristics, germination, and seedling development for seeds collected in both 2004 and 2005. Our results suggest that elevated CO2 and O3 can dramatically affect flowering, seed production, and seed quality of paper birch, affecting reproductive fitness of this species.

Human activities are increasing the concentrations of atmospheric carbon dioxide ([CO2]) and tropospheric ozone ([O3]), potentially leading to changes in the quantity and chemical quality of leaf litter inputs to forest soils. Because the quality and quantity of labile and recalcitrant carbon (C) compounds influence forest productivity through changes in soil organic matter content, characterizing changes in leaf litter in response to environmental change is critical to understanding the effects of global change on forests. We assessed the independent and combined effects of elevated [CO2] and elevated [O3] on foliar litter production and chemistry in aspen (Populus tremuloides Michx.) and birch-(Betula papyrifera Marsh.) aspen communities at the Aspen free-air CO2 enrichment (FACE) experiment in Rhinelander, WI. Litter was analyzed for concentrations of C, nitrogen (N), soluble sugars, lipids, lignin, cellulose, hemicellulose and C-based defensive compounds (soluble phenolics and condensed tannins). Concentrations of these chemical compounds in naturally senesced litter were similar in aspen and birch-aspen communities among treatments, except for N, the C:N ratio and lipids. Elevated [CO2] significantly increased C:N (+8.7%), lowered mean litter N concentration (-10.7%) but had no effect on the concentrations of soluble sugars, soluble phenolics and condensed tannins. Elevated [CO2] significantly increased litter biomass production (+33.3%), resulting in significant increases in fluxes of N, soluble sugars, soluble phenolics and condensed tannins to the soil. Elevated [O3] significantly increased litter concentrations of soluble sugars (+78.1%), soluble phenolics (+53.1%) and condensed tannins (+77.2%). There were no significant effects of elevated [CO2] or elevated [O3] on the concentrations of individual C structural carbohydrates (cellulose, hemicellulose and lignin). Elevated [CO2] significantly increased cellulose (+37.4%) input to soil, whereas elevated [O3] significantly reduced hemicellulose and lignin inputs to soil (-22.3 and -31.5%, respectively). The small changes in litter chemistry in response to elevated [CO2] and tropospheric [O3] that we observed, combined with changes in litter biomass production, could significantly alter the inputs of N, soluble sugars, condensed tannins, soluble phenolics, cellulose and lignin to forest soils in the future.

Lime mud, a kind of industrial waste that produced in paper mill, was proposed as CO2 sorbent in calcium looping process. The carbonation performance of the lime mud was investigated in a dual‐fixed bed reactor (DFR) and a thermogravimetric analyzer (TGA). The carbonation kinetics of the lime mud in the chemical reaction controlled stage was analyzed by a surface reaction‐controlled kinetic model. The results show that the lime mud presents much poorer carbonation performance during the chemical reaction controlled stage compared with the limestone, mainly due to the high content of chlorine in the lime mud. A prewash treatment process was used to decrease the chlorine content to mitigate the sintering of the lime mud when calcined at high temperature. After prewash treatment, the prewashed lime mud shows much higher CO2 capture capacity during the chemical reaction controlled stage compared with the lime mud. A prolonged carbonation process successfully further enhances the microstructure and improves the carbonation performance of the prewashed lime mud in the chemical reaction controlled stage. The lime mud can be effectively used as CO2 sorbent in calcium looping process after prewash treatment and the following prolonged carbonation treatment. [ABSTRACT FROM AUTHOR]

Atmospheric chemical composition affects foliar chemical composition, which in turn influences the dynamics of both herbivory and decomposition in ecosystems. We assessed the independent and interactive effects of CO2 and O3 fumigation on foliar chemistry of quaking aspen (Populus tremuloides) and paper birch (Betula papyrifera) at a Free-Air CO2 Enrichment (FACE) facility in northern Wisconsin. Leaf samples were collected at five time periods during a single growing season, and analyzed for nitrogen. starch and condensed tannin concentrations, nitrogen resorption efficiencies (NREs), and C:N ratios. Enriched CO2 reduced foliar nitrogen concentrations in aspen and birch; O3 only marginally reduced nitrogen concentrations. NREs were unaffected by pollution treatment in aspen, declined with 03 exposure in birch, and this decline was ameliorated by enriched CO2. C:N ratios of abscised leaves increased in response to enriched CO2 in both tree species. O3 did not significantly alter C:N ratios in aspen, although values tended to be higher in + CO2 + O3 leaves. For birch, O3 decreased C:N ratios under ambient CO2 and increased C:N ratios under elevated CO2. Thus, under the combined pollutants, the C:N ratios of both aspen and birch leaves were elevated above the averaged responses to the individual and independent trace gas treatments. Starch concentrations were largely unresponsive to CO2 and O3 treatments in aspen. but increased in response to elevated CO2 in birch. Levels of condensed tannins were negligibly affected by CO2 and O3 treatments in aspen, but increased in response to enriched CO2 in birch. Results from this work suggest that changes in foliar chemical composition elicited by enriched CO2 are likely to impact herbivory and decomposition, whereas the effects of O3 are likely to be minor, except in cases where they influence plant response to CO2.

The research proposes a model to estimate the carbon stock in mangrove forests from multispectral images from Landsat 8 and Sentinel 2B satellites. The Gramame River mangrove, located on the southern coast of Paraíba State, Brazil, was adopted as the study area. Carbon stocks in biomass, below and above ground, were measured from a forest inventory, and vegetation indices were processed on the Google Earth Engine (GEE) platform. To define the fit curves, linear and non-linear regressions were used. The choice of the model considered the highest coefficients of determination (R 2 ), the biomass and carbon stock were estimated from the equations. The biomass carbon stock, calculated from field data, corresponded to 22.27 Gg C, equivalent to 81.75 Gg CO 2 , with 13.85 Gg C (50.84 Gg CO 2 ) and 8.42 Gg C (30.91 Gg CO 2 ) stored in biomass above and below ground, respectively. Among the models fitted to the indices calculated from Landsat 8 images, NDVI was the one that best explained the spatial distribution of biomass and carbon, with 90.26%. For Sentinel 2B, SAVI was able to explain 80.76%. The total estimated plant carbon stocks corresponded to 26.66 Gg (16.20 Gg C above and 10.36 Gg C below ground) for Landsat 8 and 27.76 Gg C (16.93 Gg C above and 10.83 Gg C below ground) for Sentinel 2B. The proposed work methodology and the suggested mathematical models can be replicated to analyze carbon stocks in other locations, especially in the Americas, because they share the same species., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Growing consumption is both necessary to end extreme poverty 1 and one of the main drivers of greenhouse gas emissions 2 , creating a potential tension between alleviating poverty and limiting global warming. Most poverty reduction has historically occurred because of economic growth 3-6 , which means that reducing poverty entails increasing not only the consumption of people living in poverty but also the consumption of people with a higher income. Here we estimate the emissions associated with the economic growth needed to alleviate extreme poverty using the international poverty line of US $2.15 per day (ref.  7 ). Even with historical energy- and carbon-intensity patterns, the global emissions increase associated with alleviating extreme poverty is modest, at 2.37 gigatonnes of carbon dioxide equivalent per year or 4.9% of 2019 global emissions. Lower inequality, higher energy efficiency and decarbonization of energy can ease this tension further: assuming the best historical performance, the emissions for poverty alleviation in 2050 will be reduced by 90%. More ambitious poverty lines require more economic growth in more countries, which leads to notably higher emissions. The challenge to align the development and climate objectives of the world is not in reconciling extreme poverty alleviation with climate objectives but in providing sustainable middle-income standards of living., (© 2023. The World Bank.)

Utilization of the quality-upgraded waste paper in the manufacture of paper and board will reduce the wood consumption and pulping energy. While the optical property of the fibers from recycled old newspaper is very poor, in-situ calcium carbonate formation on those fibers by injecting carbon dioxide to the mixed slurry of those pulp and calcium oxide improved their brightness. Upgrading recycled old newspaper to substitute more expensive wood furnish, such as recycled old magazine, was successfully demonstrated in the present study. This study showed that the in-situ calcium carbonate formation process improved the optical quality of the recycled old newspaper by covering colored impurities with newly formed calcium carbonate, and improved calcium carbonate retention in papermaking process by attaching them to fibers. The strength reduction by the presence of newly formed calcium carbonate in the paper was recovered by adding strength agent. High ash retention at high ash content under the strong turbulence in the modern paper mill was achieved by the application of the in-situ calcium carbonate formation method. The quality-upgrade of recycled fibers and cost saving in the manufacture of duplex paperboard were demonstrated in the mill trial. [ABSTRACT FROM AUTHOR]

Hybrid calcium carbonate (HCC) is prepared by pre-flocculating calcium oxide and ground calcium carbonate (GCC) with ionic polymers, and by injecting carbon dioxide to the pre-flocculated flocs until termination of the reaction at neutral pH. When used in papermaking, HCC gave higher bulk, higher stiffness, and higher tensile strength than GCC did. Furthermore, when higher wet pressing pressure was applied to the paper containing HCC, higher solid content was achieved with still better stiffness, smoothness, and tensile strength in comparison with the paper containing GCC. Actually, very high bulk of the HCC containing paper was compromisingly reduced to obtain high solid content by applying higher wet pressing pressure. Higher solid content achieved by combination of HCC technology and higher wet pressing pressure resulted in paper drying energy savings of more than 10%, while a high quality of all the essential printing paper properties was maintained. Drying energy savings may contribute to greenhouse gas (GHG) reduction and lowering of the paper production cost. [ABSTRACT FROM AUTHOR]

Research Highlights: Long-term exposure of paper birch to elevated carbon dioxide (CO2) and ozone (O3) modified metabolite content of over-wintering buds, but no evidence of reduced freezing tolerance was found. Background and Objectives: Atmospheric change may affect the metabolite composition of over-wintering buds and, in turn, impact growth onset and stress tolerance of perennial plant species in spring. Materials and Methods: Low molecular weight compounds of paper birch (Betula papyrifera) buds, including lipophilic, polar and phenolic compounds were analyzed, and freezing tolerance (FT) of the buds was determined prior to bud break after 11 growing seasons exposure of saplings to elevated concentrations of CO2 (target concentration 560 µL L−1) and O3 (target concentration 1.5 × ambient) at the Aspen FACE (Free-Air CO2 and O3 Enrichment) facility. Results: The contents of lipophilic and phenolic compounds (but not polar compounds) were affected by elevated CO2 and elevated O3 in an interactive manner. Elevated O3 reduced the content of lipids and increased that of phenolic compounds under ambient CO2 by reallocating carbon from biosynthesis of terpenoids to that of phenolic acids. In comparison, elevated CO2 had only a minor effect on lipophilic and polar compounds, but it increased the content of phenolic compounds under ambient O3 by increasing the content of phenolic acids, while the content of flavonols was reduced. Conclusions: Based on the freezing test and metabolite data, there was no evidence of altered FT in the over-wintering buds. The impacts of the alterations of bud metabolite contents on the growth and defense responses of birches during early growth in spring need to be uncovered in future experiments.

Microbial electrosynthesis (MES) constitutes a bioelectrochemical process where bacteria uptake electrons extracellularly from a polarized electrode to incorporate them into their anabolic metabolism. However, the efficiency of current MES reactor designs can be lower than expected due to limitations regarding electron transfer and mass transport. One of the most promising bioreactor configurations to overcome these bottlenecks is the Microbial Electrochemical Fluidized Bed Reactor (ME-FBR). In this study, microbial CO 2 fixation is investigated for the first time in a ME-FBR operated as a 3-phase reactor (solid-liquid-gas). An electroconductive carbon bed, acting as a working electrode, was fluidized with gas and polarized at different potentials (-0.6, -0.8 and -1 V vs. Ag/AgCl) so it could act as an electron donor (biocathode). Under these potentials, CO 2 fixation and electron transfer were evaluated. Autotrophic electroactive microorganisms from anaerobic wastewater were enriched in a ME-FBR in the presence of 2-bromoethanosulfonic acid (BES) to inhibit the growth of methanogens. Cyclic voltammetry analysis revealed interaction between the microorganisms and the cathode. Furthermore, volatile fatty acids like propionate, formate and acetate were detected in the culture supernatant. Acetate production had a maximum rate of ca. 1 g L -1  day -1 . Planktonic cell biomass was produced under continuous culture at values as high as ca. 0.7 g L -1 dry weight. Overall, this study demonstrates the feasibility of employing a fluidized electrode with gaseous substrates and electricity as the energy source for generating biomass and carboxylic acids., (© 2023 The Authors. Microbial Biotechnology published by Applied Microbiology International and John Wiley & Sons Ltd.)

Background: Patient reported outcomes (PROs) have an integral role on how to improve patients' overall experience. The optimal PROs delivery in patients with breast disease is an important issue since PROs are steadily integrated in routine care., Methods: An institutional phase 3 randomised controlled, open-label trial. Eligible candidates were adult women with perceived or confirmed breast disease. Computer generated randomization was used to allocate interventions: collection of PROs in electronic or paper form. Our objective was the effectiveness of electronic versus paper form of PROs. The main outcome measures were: response rate, reported experience, administrative resources, and carbon dioxide emissions., Results: Two hundred thirty-eight patients were randomised. After loss-to-follow-up and consent withdrawals, 218 participants (median age, IQR=55, 21; n =110/ n =108) were included in the per-intention-to-treat analysis. Response rate was 61.8% for electronic patient reported outcomes (ePROs) and 63.9% for paper patient reported outcomes (pPROs) (difference=-2.1%, 95% CI: -15.8-11.7%). Only known breast cancer at recruitment was predictive for response in multivariable analysis. ePROs were associated with a 57% reduction in administrative time required, a 95% reduction in incremental costs, and 84% reduction in carbon dioxide emissions, all differences being significant. No difference was detected in perception of PRO significance or ease of completion, but participants experienced that they needed less time to complete ePROs [median, (IQR) 10 (9) respectively 15(10)]. Finally, respondents would prefer ePROs over pPROs (difference 48.1%, 95% CI: 32.8-63.4%)., Conclusion: ePROs do not increase the response rate in patients with perceived or confirmed breast disease. However, they can enhance patient experience, reduce incremental costs, facilitate administrative logistics, and are more sustainable. On the basis of these findings, both modalities should continue to be available., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc.)

Central American and Caribbean (CAC) countries enjoy diverse marine environments. The oceans that enclose these coastlines contribute significantly to their economic growth. Industrial expansion and tourism place pressure on the marine ecosystems causing a decline in ocean health. To evaluate the cause of ocean health changes we investigated the factors influencing CAC ocean health using a health production function. Using Rank-Based Regression and the set of extractive, cultural and human well-being and services goals measuring Ocean Health Index (OHI), data from the World Bank, and the Human Development Index we developed a production function for CAC countries ocean health. Results show that all regional OHI scores, but Tourism and Recreation, the main income earning industry for most of the CAC countries, are less than the global score with four of the goals less than 40. The production function shows that all the goals, but the biodiversity sub-goal species, positively influencing OHI. Two climatic related variables, Nitrous Oxide and Carbon Dioxide negatively influenced OHI. The results are important to policy makers as they decide on the need to make greater effort towards improving sustainable contribution of CAC ocean resources to the blue economy., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

In 2017, a carbon emissions trading market will be launched nationwide by the China government. Calculating the enterprise carbon emissions is an important prerequisite and basis for trading. This paper discussed types of greenhouse gases, calculation boundaries and methods, energy consumption, carbon emissions, and intensity of a representative integrated pulp and paper mill in China based on China Guidance and Greenhouse Gas Protocol Tools. The results showed that there were 435,000 tonnes (t) of CO2 emissions from that mill in 2014 that did not contain emissions of biomass energy, which was 8 times higher than that of fossil energy. The pulp carbon intensity based on the mill was 0.230 t CO2/Adt, which accounted for 7.50% to 57.4% in other pulps' based on the product. Intensity based on Gross Domestic Product (GDP) was 1.090 t CO2e/1000 USD and accounted for 56.8% intensity in the China paper industry. The intensity based on sales accounted for 52.6% in the firstclass enterprise in the developed country. It also showed that intensity was influenced by the species of raw material, energy, and products, which provided the mill with measures for energy saving and emissions reduction to obtain the redundant carbon emissions in the trading. [ABSTRACT FROM AUTHOR]

To explore if and how the common rebreathing (paper bag) approach to hyperventilation works, two experiments were carried out. In the first experiment, 12 normal volunteers, aware of the common physiological rebreathing rationale, were twice asked to overbreath intensely and then either to rebreath or to restart normal ventilation. Alveolar CO2 increased more quickly and physical symptoms disappeared earlier in the rebreathing condition. The second experiment had a similar design; however, this time the subjects were led to believe that, after both hyperventilation provocation tests, they were rebreathing in a semiclosed tube system. On one of the occasions, the tube system was, in fact, open. The CO2 restoration again differed in the two conditions. In this second experiment, the moment of symptom disappearance was not significantly earlier in the rebreathing condition. The combined results of the studies suggest that expectation and suggestion play a role in the effects of rebreathing approaches on hyperventilation.