Search

The article reports on the two papers which were linked to an extortion attempt and originated from the laboratory of Peter Schultz, a prominent chemist at the Scripps Research Institute in La Jolla, San Diego, California. The papers claimed to describe the successful incorporation of amino acids linked to sugars at specific positions in proteins made by the bacterium Escherichia coli. Related issues are further discussed.

The article profiles Phil Baran, a researcher and author for the journal "Nature Chemical Biology." It states the Baran is also an organic chemist at the Scripps Research Institute in La Jolla, California. According to the article, since he was called up to work on the review of the terpenes, he agreed to do the task and developed his knowledge in terpene field. Further information on the researches of Baran related to chemical synthesis is presented.

The article discusses the success of Erica Ollmann Saphire, an immunologist at the Scripps Research Institute in La Jolla, California, and her team in winning the race on providing a picture of how the deadly Ebola virus evades the immune system and enter cells. The move was risky and the work was long and difficult. It took them over four years to express 130 versions of the Ebola virus glycoprotein, grow and test crystal diffractions. The team found out that the virus can lie in wait for years. Saphire and her colleagues managed to solve the structure of an infection-blocking antibody bound to a viral protein, revealing a possible defence against the virus.

A number of models for the critical surface of Nb3 Sn, and in general A15 superconductors, have been developed in the past years. This paper compares the most common parameterizations using consistent notation. Although the parameterizations appear dissimilar at first sight, they are in reality all based on a fit of the normalized pinning force vs. the reduced field, and have similar scalings for the critical field and critical temperature based on a Unified Scaling Law. In this paper we take the various parameterizations as a basis for a generic scaling proposed for the characterization and production follow-up of the ITER Nb3 Sn strands. The accuracy of the scaling is estimated using the fitting residuals on various sets of Ic (B, T, ϵ) data available in literature. We discuss the results, and give our view of the work towards a unified, practical parameterization. [ABSTRACT FROM AUTHOR]

The measurement of the current sharing temperature of a Cable in Conduit Conductor is a complex task. The voltage traces measured on the conduit (jacket) of these conductors during tests, give V∙I characteristics that significantly differ from the typical transition from the superconducting to the resistive state measured on single strands. In these measurements, after an initial ramping of the transport current up to the test value, the temperature is increased by steps until the resistive transition occurs. However, even in the first phase of the current ramping, when the cable is still fully or almost superconductive, early voltages are measured along the jacket at different angular positions around the cable. In particular, this was observed in the ITER TF conductors recently tested in the SULTAN facility at Villigen PSI, Switzerland. These samples showed significant ramps of voltages taken in the proximity of the joints and terminations. The present paper gives a possible qualitative and quantitative explanation for this mechanism. Numerical simulations are also shown which reproduce the scattering of the voltages measured around the jacket at a given location, showing the effect of the voltage taps position along the jacket in a six sub-cable model. [ABSTRACT FROM AUTHOR]

In this paper we report the main test results obtained on the Poloidal Field Conductor Insert coil (PFI) for the International Thermonuclear Experimental Reactor (ITER), built jointly by the EU and RF ITER parties, recently installed and tested in the CS Model Coil facility, at JAEA-Naka. During the test we (a) verified the DC and AC operating margin of the NbTi Cable-in-Conduit Conductor in conditions representative of the operation of the ITER PF coils, (b) measured the intermediate conductor joint resistance, margin and loss, and (c) measured the AC loss of the conductor and its changes once subjected to a significant number of Lorentz force cycles. We compare the results obtained to expectations from strand and cable characterization, which were studied extensively earlier. We finally discuss the implications for the ITER PF system. [ABSTRACT FROM AUTHOR]

For the superconducting magnet system of the International Thermonuclear Experimental Reactor, ITER, 60 current leads for a total current of more than 2500 kA are needed. The use of High Temperature Superconductor current leads (HTS-CL) will reduce the resultant large refrigerator load considerably. Within the EU Fusion Technology Programme, the Forschungszentrum Karlsruhe and CRPP have developed and built a 70 kA HTS-CL demonstrator optimized for 50 K Helium operation. In 2004-2005, the CL was successfully tested with 50 K as well as 80 K Helium, and finally with LN2. In the meantime, ITER has decided to use HTS-CLs for the magnet system and China has taken the responsibility to provide the sc feeders for ITER including the current leads. In this paper, the performance of a 70 kA HTS-CL in fault conditions will be analysed using the FZK-CRPP demonstrator as a model. In particular, the quench performance and the safety behavior in case of a loss-of-flow accident (LOFA) will be described and an extrapolation of the leads performance in real ITER conditions will be given. Finally the effect of different shunt materials is discussed. [ABSTRACT FROM AUTHOR]

The ITER Organization (10) and the Institute of Plasma Physics at the Chinese Academy of Sciences (ASIPP) are jointly developing the 68 kA current leads using High Temperature Superconductors for the superconducting Toroidal Field (TF) magnet system of the International Thermonuclear Experimental Reactor, ITER. The proposed design consists of a conventional helium cooled heat exchanger operating between 65 K and 320 K and an HTS module covering the low temperature end using Bi-2223 tapes. The first HTS current lead prototypes will be tested in the EAST tokamak facility at ASIPP. This paper discusses the design of the first, 68 kA, TF HTS lead, which is the main emphasis of this first stage of the ITER current lead development program. [ABSTRACT FROM AUTHOR]

The status of anthropomorphism has changed in recent decades, allowing for in-depth consideration of its meaning and salience. Advocates of anthropomorphism have put forth a series of scientific and theoretical arguments to establish the concept's legitimacy. Nonetheless, while many advocates of anthropomorphism criticize the scientific worldview that objectifies nonhumans, their arguments still retain a cognitive perspective that implicitly reaffirms human-nonhuman hierarchies. This paper challenges these notions by accentuating the role of material factors in the formation and dissemination of anthropomorphic thought. These materials include human and nonhuman bodies, as well as the physicality of the external environment. This paper also examines the different ways in which social factors blend with these material factors to bring about anthropomorphic thinking. To clarify these issues, this paper examines an ongoing human conflict with harbor seals in La Jolla, California to illustrate these points. It concludes by suggesting that materialist articulations of anthropomorphism may foster an ethical perspective with environmental significance. [ABSTRACT FROM AUTHOR]

For the superconducting magnet system of the International Thermonuclear Experimental Reactor, ITER, 60 current leads for a total current of more than 2500 kA are needed. To reduce the resultant large refrigerator load at 4.5 K, High Temperature Superconductor current leads (HTS-CL) could be used. Therefore, EFDA CSU Garching had launched a development program for a 70 kA HTS-CL demonstrator. The Forschungszentrum Karlsruhe and CRPP developed and built this CL optimized for 50 K Helium operation. In 2004, the CL was successfully tested in the TOSKA facility at the Forschungszentrum Karlsruhe. The very encouraging results lead to testing this CL with 80 K Helium because ITER provides a large 80 K Helium cooling capacity for the thermal shields. At the end of last year, the test could be successfully performed demonstrating that high current capacity current leads can be stably operated at about 80–85 K. Recently, the CL was retested using liquid nitrogen which would be an interesting alternative option. In this paper, the test results for the 80 K He cooling operation as well as for the operation with LN2 are presented and compared to the results obtained before for nominal conditions. [ABSTRACT FROM AUTHOR]

Abstract: In this paper, a complete framework including modeling, identification and control design for an experimental Helium refrigerator facility submitted to high pulsed loads is proposed. Such high pulsed loads are expected to take place in future Tokamaks such as the International Thermonuclear Experimental Reactor (ITER) or the Japan Torus-60 Super Advanced (JT60SA). The control architecture is split into two loops: The first concerns the warm compression system while the second manages the remaining part of the refrigerator (often called the cold box) in which the set-points of the first loop are viewed as manipulated variables. The efficiency of the proposed solution is experimentally assessed under several scenarios including those involving realistic high pulsed loads. [Copyright &y& Elsevier]

Abstract: The Republic of Korea is participating in the ITER project as a full member and procuring components for the ITER tokamak and its facility. This paper presents the current stage of preparation of the ITER components to be delivered by Korea including an overview of Korean activities related to the ITER project, as of October 2009. [ABSTRACT FROM AUTHOR]

Abstract: Tritium breeding blanket testing is an important element in the ITER mission. Up to six different concepts for tritium breeding blanket systems, referred to as Test Blanket Systems (TBS), will be tested in three equatorial ports of ITER. Successful TBS experiments in ITER represent an essential step on the path to DEMO for all the ITER Members’ fusion development plans. The ITER Members are in charge of the design, manufacturing and delivery of the TBSs to the ITER site. The IO has responsibility for preparing the necessary interfaces required for the installation of the TBSs. Moreover, the TBM Program has to be fully integrated in the ITER Research Plan and its testing objectives have to be synchronized with the planned ITER operations. The paper addresses the major implementation steps of the TBM Program in ITER, including the organizational aspects, its integration into the ITER Research Plan and the Operational Plan, the licensing procedure and also gives a short overview of the TBS/ITER interfaces issues. [ABSTRACT FROM AUTHOR]

Abstract: The most critical part of a high heat flux (HHF) plasma facing component (PFC) is the armour to heat sink joint. An experimental study was launched by EFDA in order to define the acceptance criteria to be used for the procurements of the ITER Divertor PFCs. ENEA is involved in the European International Thermonuclear Experimental Reactor (ITER) R&D activities and together with Ansaldo Ricerche S.p.A. has manufactured several PFCs mock-ups using the Hot Radial Pressing and Pre-Brazed Casting technologies. According to the technical specifications issued by EFDA, ENEA and Ansaldo have collaborated to manufacture half of the samples with calibrated artificial defects required for this experimental study. After manufacturing, the samples were examined by ultrasonic and SATIR non-destructive examination (NDE) methods in order to confirm the size and position of the artificial defects. In particular, it was concluded that defects are detectable with these NDE techniques and they finally gave indication about the threshold of propagation during high heat flux experiments relevant with heat fluxes expected in ITER Divertor. This paper reports the manufacturing procedure used to obtain the required calibrated artificial defects in the CFC and W armoured samples as well as the NDE results and the thermal high heat flux results. [ABSTRACT FROM AUTHOR]

Abstract: The International Thermanuclear Experimental Reactor (ITER) tokamak device is composed of 9 vacuum vessel (VV)/toroidal field coils (TFCs)/vacuum vessel thermal shields (VVTS) 40° sectors. Each VV/TFCs/VVTS 40° sector is made up of one 40° VV, two 20° TFCs and associated VVTS segments. The 40° sectors are sub-assembled at assembly hall respectively and then nine 40° sectors sub-assembled at assembly hall are finally assembled at tokamak in-pit hall. The assembly strategy and tools for the 40° sector sub-assembly and final assembly should be developed to satisfy the basic assembly requirements of the ITER tokamak device. Accordingly, the purpose-built assembly tools should be designed and manufactured considering assembly plan, available space, cost, safety, easy operation, efficient maintenance, and so on. The 40° sector assembly tools are classified into 2 groups. One group is the sub-assembly tools including upending tool, lifting tool, sub-assembly tool, VV supports and bracing tools used at assembly hall and the other group is the in-pit assembly tools including lifting tool, central column, radial beams and their supports. This paper describes the current status of the assembly strategy and major tools for the VV/TFCs/VVTS 40° sector assembly at in-pit hall and assembly hall. The conceptual design of the major assembly tools and assembly process at assembly hall and tokamak in-pit hall are presented also. [ABSTRACT FROM AUTHOR]

Abstract: One of the key missions of the international thermonuclear experimental reactor (ITER) is to test and validate the various design concepts of tritium breeding blankets relevant to a power-producing reactor like DEMO. India has developed two breeding blanket concepts such as, lead lithium cooled ceramic breeder (LLCB) and helium cooled ceramic breeder (HCCB) for its DEMO. LLCB concept will be tested in ITER where Li2TiO3 ceramic breeder (CB) in the form of packed pebble beds is used as a tritium breeding material and PbLi eutectic is used as multiplier, breeder, and coolant for the CB zones. A detail engineering design and analysis has been executed for the LLCB TBM to optimize the flow parameters for helium and PbLi circuits, to estimate the temperature distribution in the various breeding zones and to ensure the thermal design limits for structural material and temperature window in ceramic breeder for effective tritium extraction. The detailed thermo-hydraulic CFD using Fluent and FE simulation studies will also be discussed in this paper. [ABSTRACT FROM AUTHOR]

Abstract: In the ITER edge Thomson scattering measurement system, polychromators with optical band-pass filters and avalanche photodiodes are planned to be used. In this paper, we optimized the transmission wavelength ranges of the optical filters by a numerical method. Since measurements in a high electron temperature range are required for the measurement system, the Thomson spectrum could overlap a strong line emission of when the electron temperature is rather high. It is shown that a filter whose transmission wavelength range is shorter than becomes important to decrease the measurement error in the high temperature range. Moreover, it is found that a filter whose transmission wavelength range is above 1064nm (laser wavelength) is useful to improve the measurement accuracy, in particular, when the number of filters is more than six. [Copyright &y& Elsevier]

Abstract: The present paper deals with the detailed investigation of the helium-cooled lithium lead test blanket module (HCLL-TBM) nuclear behaviour under irradiation in ITER, carried out at the Department of Nuclear Engineering of the University of Palermo adopting a numerical approach based on the Monte Carlo method. A realistic 3D heterogeneous model of the HCLL-TBM was set-up and inserted into an ITER 3D semi-heterogeneous model that realistically simulates the reactor lay-out up to the cryostat. A Gaussian-shaped neutron source was adopted for the calculations. The main features of the HCLL-TBM nuclear response were assessed, paying a particular attention to the neutronic and photonic deposited power, the tritium production rate and the spatial distribution of their volumetric densities. Structural material irradiation damage was also investigated through the evaluation of displacement per atom and helium and hydrogen production rates. [Copyright &y& Elsevier]

Abstract: The ITER conductor is made of a superconductor cable with multi-stage twisted strands. The spatial structure of such a cable is essential for understanding the effect of load and strain on the performance of a superconducting cable. Unfortunately, there have no analytical models so far to describe accurately such twisted spatial structure. This paper proposes a twisting matrix model to accurately describe the spatial structure of a multi-stage twisted superconducting cable. Although the current model only simulates the first step of a cabling process, it still gives approximately neighboring relation between strands and sub-cables. This neighboring relation is essential for any cabling simulation. The 2nd step simulation, i.e., compaction, can be realized by finite element method based on the cable spatial structure constructed by the proposed one. The simulation results by this model agree well with the observations for pitch and orientation. [Copyright &y& Elsevier]

Abstract: The operating limits and conditions (OLCs) are operating parameters and conditions, chosen among all system/components, which, together, define the domain of the safe operation of ITER in all foreseen ITER states (operation, maintenance, commissioning). At the same time they are selected to guarantee the required operation flexibility which is a critical factor for the success of an experimental machine such as ITER. System and components that are important for personnel or public safety (safety important class, SIC) are identified considering their functional importance in the overall plant safety analysis. SIC classification has to be presented already in the preliminary safety analysis report and approved by the licensing authority before manufacturing and construction. OLCs comprise the safety limits that, if exceeded, could result in a potential safety hazard, the relevant settings that determine the intervention of SIC systems, and the operational limits on equipment which warn against or stop a functional deviation from a planned operational status that could challenge equipment and functions. Some operational conditions, e.g. in-Vacuum Vessel (VV) radioactive inventories, will be controlled through procedures. Operating experience from present tokamaks, in particular JET, and from nuclear plants, is considered to the maximum possible extent. This paper presents the guidelines for the development of the ITER OLCs with particular reference to safety limits. [Copyright &y& Elsevier]

Dust mobilization in a vacuum vessel is one of the key issues endangering the security of the International Thermonuclear Experimental Reactor (ITER) in case of loss of vacuum accidents. The turbulent behavior of particles in turbulent flows has to be modeled for successful numerical simulations about particle mobilization. In this study a Lagrangian approach is adopted to formulate the particle transport especially for dust-dilute flows mostly encountered in the vacuum vessel of ITER. Based on the logic frame of the approach and the used computational fluid dynamics (CFD) computer code in the study, a hybrid turbulent particle dispersion model is proposed. The hybrid model features both a deterministic separated flow model and a stochastic separated flow (SSF) model, which are two popular turbulent dispersion models applied in particle simulations, and takes the advantages of the both models. The proposed model is implemented into the particle model of the CFD code successfully and the simulation results are verified against the experimental data. The verifications manifest the validities of the proposed model. In this paper general information about the work of dust mobilization is introduced and the particle turbulent dispersion models are reviewed briefly at first. The hybrid model is then proposed based on the SSF model. An experiment about particle dispersions in an advective wind channel flow with decaying turbulence in the streamwise direction is reviewed in the third section. In the following section about model verification, the decaying turbulence parameters in the channel flow are verified against the experimental data as the first step, and the parameters about the particle dispersions in the verified flow field are then verified against the data. The work is concluded finally. [ABSTRACT FROM AUTHOR]

The US is proposing a prototype of a dual coolant liquid lead-lithium DEMO blanket concept for testing in the International Thermonuclear Experimental Reactor (ITER) as an ITER test blanket module (TBM). Because safety considerations are an integral part of the design process to ensure that this TBM does not adversely impact the safety of ITER, a safety assessment has been conducted for this TBM and its ancillary systems as requested by the ITER project. Four events were selected by the ITER international team (IT) to address specific reactor safety concerns, such as vaccum vessel (VV) pressurization, confinement building pressure build-up, TBM decay heat removal capability, tritium and activation products release from the TBM system and hydrogen and heat production from chemical reactions. This paper summarizes the results of this safety assessment conducted with the MELCOR computer code. [ABSTRACT FROM AUTHOR]

Focuses on the adaptive, evolving character of a research school developed among scientists at the Scripps Institution of Oceanography in La Jolla, California in the 1930s and 1940s. Dynamical geography; Importance of adaptation and interaction in research schools; Insights into the formation of research schools.

Neoclassical tearing modes (NTMs) are experimentally controlled with local electron cyclotron current drive (ECCD) and the island width decay during NTM stabilization is modelled using the so-called modified Rutherford equation (MRE). In this paper, a modelling of the MRE is carried out and simulations of the island width decay are compared with the experimentally observed ones in order to fit the two free machine-independent parameters present in the equation. A systematic study on a database of NTM stabilization discharges from ASDEX Upgrade and JT-60U is done for extrapolating the ECCD power requirements for ITER. The extrapolation to ITER of the NTM stabilization results from ASDEX Upgrade and JT-60U shows that 10 MW of ECCD power are enough to stabilize large NTMs. The 10 MW power estimate for ITER is based on the assumption that the free parameters in the MRE are machine independent. Indeed, this assumption is verified in this paper for ASDEX Upgrade and JT-60U. An interesting consequence of the relatively modest power requirement for ITER is that the installed 20 MW will suffice for simultaneous 2/1 and 3/2 NTM stabilization. [ABSTRACT FROM AUTHOR]

Comments on the letter by author Richard Buttery published in the 424 volume of the journal "Nature" about the Joint European Torus (JET) as of October 16, 2003. Statements given by the author on the situation that might occur if there were no substantial increase in the fusion budget in the Seventh Euratom Framework Programme; Criticism made by the author about the misinterpretation of his statements about JET in the letter; Relationship between JET and International Thermonuclear Experimental Reactor in La Jolla, California.

“I admire people with strong determination and persistence. My favorite musician is the violinist Jascha Heifetz …︁” This and more about Chi‐Huey Wong can be found on page 11452. [ABSTRACT FROM AUTHOR]

Three planned test blanket modules (TBMs) and 18 toroidal field coils break the axisymmetry of the ITER magnetic field. In this paper, the plasma response on these non-axisymmetric fields is studied quantitatively. For this purpose, self-consistent, three-dimensional, free-boundary equilibria of type ITER scenario 4 are computed. The resulting 3D equilibrium magnetic fields are then compared with the corresponding axisymmetric fields to which the vacuum perturbation fields are superimposed. The studies are performed for various normalized plasma pressures. [ABSTRACT FROM AUTHOR]

The article provides information on the biological process of converting sound waves into electrical impulses by hair cells in the cochlea. As stated by Ulrich Müller and colleagues at the Scripps Research Institute in La Jolla, San Diego, California, hair cells will allow individuals to hear sound through sound waves conversion. It states that the end of the hair cell is a bundle of stereocilla which are connected to each other through structures. It likewise claims that when the structures are deflected by sound pressure they will exert a force which would open the channels resulting to sound creation.

A recent earthquake and the subsequent tsunami have extensively damaged the Fukushima nuclear power plant, releasing harmful radiation into the environment. Despite the obvious implication for human health and the surrounding ecology, there are no quantitative estimates of the neutron flux leakage during the weeks following the earthquake. Here, using measurements of radioactive 35S contained in sulfate aerosols and SO2 gas at a coastal site in La Jolla, California, we show that nearly 4 × 1011 neutrons per m² leaked at the Fukushima nuclear power plant before March 20, 2011. A significantly higher 35SO42- activity as measured on March 28 is in accord with neutrons escaping the reactor core and being absorbed by the coolant seawater 35Cl to produce 35S by a (n, p) reaction. Once produced, 35S oxidizes to 35SO2- and 35SO42- was then transported to Southern California due to the presence of strong prevailing westerly winds at this time. Based on a moving box model, we show that the observed activity enhancement in 35SO42- is compatible with long-range transport of the radiation plume from Fukushima. Our model predicts that 35SO42-, the concentration in the marine boundary layer at Fukushima, was approximately 2 × 105 atoms per m³, which is approximately 365 times above expected natural concentrations. These measurements and model calculations imply that approximately 0.7% of the total radioactive sulfate present at the marine boundary layer at Fukushima reached Southern California as a result of the trans-Pacific transport. [ABSTRACT FROM AUTHOR]

Impacts of pellets injected from the low-field side (LFS) on plasma in ITER are investigated using the 1.5D BALDUR integrated predictive modeling code. In these simulations, the pellet ablation is described using the neutral gas shielding (NGS) model. The pellet ablation model is coupled with the plasma core transport model, which is a combination of the MMM95 anomalous transport model and NCLASS neoclassical transport model. The boundary conditions are assumed to be at the top of the pedestal, in which the pedestal parameters are predicted using a pedestal model based on the theoretical-based pedestal width scaling (either magnetic and flow shear stabilization width scaling, or flow shear stabilization width scaling, or normalized poloidal pressure width scaling) and the infinite- n ballooning mode pressure gradient limit. These pedestal models depend sensitively on the density at the top of the pedestal, which can be strongly influenced by the injection of pellets. The combination of the MMM95 and NCLASS models, together with the pedestal and NGS models, is used to simulate the time evolution of the plasma current, ion and electron temperatures, and density profiles for ITER standard type-I ELMy H-mode discharges during the injection of LFS pellets. It is found that the injection of pellets results in a complicated plasma scenario, especially in the outer region of the plasma and the plasma conditions at the boundary in which the pellet has an impact on increasing the plasma edge density, but reducing the plasma edge temperature. The LFS pellet has a stronger impact on the edge as compared to the center. For fusion performance, the pellet can result in either enhancement or degradation, depending sensitively on the pellet parameters; such as the pellet size, pellet velocity, and pellet frequency. For example, when a series of deuterium pellets with a size of 0.5 cm, velocity of 1 km/s, and frequency of 2 Hz are injected into the ITER plasma from the LFS, the plasma performance, evaluated in terms of Q, can increase to 72% of that before the use of pellets. It is also found that the injection of pellets results in an increase in the ion and electron densities, but does not enhance the central plasma density. On the other hand, it results in the formation of another peak of the plasma density in the outer region near the plasma edge. The formation of the density peak results in the reduction of plasma transports near the edge by decreasing the contributions of ion-temperature-gradient and trapped electron modes, as well as kinetic ballooning modes. [ABSTRACT FROM AUTHOR]

This article presents a study of the excavation of the University House Burials in La Jolla, California and the controversy surrounding the ownership and treatment of the recovered Paleoindian remains. The importance of prehistoric remains to Native American communities, miscommunication between tribal leaders and scientists, and the process of identifying ancient remains in the Americas are explored. U.S. legislation concerning the status of recovered remains is also discussed.

Current status review of a tokamak reactor-based research is intended for the average readers. Using the project of International Thermonuclear Experimental Reactor (ITER) as an example, physical and engineering issues are discussed. Socio-economic aspects of a future fusion power plant (FPP) are considered. Draft of Russian Roadmap to FPP is presented. In conclusion possibilities of nuclear fuel production in a fusion reactor are outlined. [ABSTRACT FROM AUTHOR]

In the quest for new energy sources, the research on controlled thermonuclear fusion has been boosted by the start of the construction phase of the International Thermonuclear Experimental Reactor (ITER). ITER is based on the tokamak magnetic configuration, which is the best performing one in terms of energy confinement. Alternative concepts are however actively researched, which in the long term could be considered for a second generation of reactors. Here, we show results concerning one of these configurations, the reversed-field pinch (RFP). By increasing the plasma current, a spontaneous transition to a helical equilibrium occurs, with a change of magnetic topology. Partially conserved magnetic flux surfaces emerge within residual magnetic chaos, resulting in the onset of a transport barrier. This is a structural change and sheds new light on the potential of the RFP as the basis for a low-magnetic-field ohmic fusion reactor. [ABSTRACT FROM AUTHOR]

Numerous manufacturers and different strand processing techniques are involved with the production of the Nb3 Sn strand material required for ITER. The superconducting transport properties of brittle Nb3 Sn layers strongly depend on their strain state. Hence, the thermal compression and the substantial transverse load in combination with the key choice for the cabling pattern of the CICCs, will determine their performance. Knowledge of the influence of axial strain, periodic bending, and contact stress on the critical current (Ic) of the used Nb3 Sn strands is inevitable to gain sufficient confidence in an economic design and a stable operation of ITER. We have measured the Ic and n-value of Nb3 Sn strands from various manufacturers in the TARSIS facility, when subjected to spatial periodic bending and contact stress. The Ic and n-values have been determined for applied axial compressive and tensile strain varying from -0.8% up to +0.5%, between T = 4.2 K and 10 K and B = 6 T to 14 T. The strain sensitivity varies appreciably for different strand types. We present a selection of the results obtained so far. [ABSTRACT FROM AUTHOR]

Interviews Gerald M. Edelman, director the Neuroscienes Institute in La Jolla, California. Personal background; Career highlights; Awards and recognitions received; Studies and projects spearheaded; Contributions to neurosciences.

We tracked six individuals of three shark species, the shortfin mako, Isurus oxyrinchus, great white, Carcharodon carcharias, and blue, Prionace glauca, near the submarine canyon off La Jolla, southern California during the summers of 1995 and 1997. The duration of tracking ranged from 2 to 38 h per shark. The mode of travel differed in one respect among species. The rate of movement of the endothermic species, the mako and white shark, exceeded that of the ectothermic species, the blue shark. Similarities among species were more common. Firstly, individuals of all three species swam in a directional manner. Secondly, individuals constantly moved up and down in the water column, exhibiting oscillatory or yo-yo swimming. Thirdly, members of the three species swam at the surface for prolonged periods. Finally, the movements of the mako and white sharks were at times loosely associated with bottom topography. We discuss the various adaptive advantages that have been proposed for these behavioral patterns. Oscillatory swimming has been attributed to the following: (1) heating the body in the warm surface waters after swimming in cold, deep water, (2) alternating between two strata of water, one carrying chemical information as to its source, and deriving a direction to that stratum's origin, (3) conserving energy by quickly propelling oneself upward with many tail beats and slowly gliding downward with few beats, and (4) descending to where magnetic gradients are steeper, more perceptible, and useful to guide migratory movements. At the surface, an individual would be able to swim in a straight line by using following features as a reference: (1) celestial bodies, (2) polarized light, or (3) the earth's main dipole field. Furthermore, an individual would conserve energy because of the greater ease to maintaining a warm body in the heated surface waters. [ABSTRACT FROM AUTHOR]

Reports on the electronic journal timeliness study by the Scripps Institution of Oceanography Library in 1999 and 2000. Comparison of the receipt of print journal issues with the availability of the same issues online; Percentage of issues with online versions already available by the time of print receipt.

Describes the design of the International Thermonuclear Experimental Reactor (ITER) magnet and model coils. Key features of the ITER Final Design Report magnet design; Magnet design drivers for Reduced Technical Objectives/Reduced Cost-ITER; Characteristics of the model coils.

Assesses the radial plate design of the Toroidal Field superconducting coil winding pack of the International Thermonuclear Experimental Reactor. Design options for the winding pack; Features of the radial plate design; Effective elastic characteristics of the winding pack; Stress analysis.

Focuses on the use of the pancake-wound technique in the development of the central solenoid (CS) coil of the Reduced Technical Objective/Reduced Cost for the International Thermonuclear Experimental Reactor. Coil design; Two alternatives for the CS conduit reinforcement; Assessment of the CS structure performance through an axisymmetric finite element method.

Evaluates the performance of the coils made of Cable-In-Conduit Nb3Sn conductors for the Central Solenoid of the International Thermonuclear Experimental Reactor. Performance of fast ramp tests; Distribution of the current inside the cable; Measurement of the critical current; Determination of the fastest possible current ramps.

Focuses on the development of an Nb3Sn conductor joint for the Central Solenoid (CS) Model Coil of the International Thermonuclear Experimental Reactor. Configuration of the butt joint for the CS Model Coil; Fabrication of hairpin cable; Joint resistance; Measurement of the quench current in various temperatures and fields.

Describes the design and fabrication of an Central Solenoid Model Coil developed by the International Thermonuclear Experimental Reactor. Overview of the inner module fabrication; Peak field produced by the model coil; Coil winding procedure; Insulation technology and materials.

Profiles Harmon Craig, professor of oceanography and geochemistry at the Scripps Institution of Oceanography in La Jolla, California. Award received by Craig in 1998; Impact of Craig's research on the field of geochemistry; Analysis of the methane content of the atmosphere.