Search

In this paper, the stress–strength reliability $ R_{s,k} $ R s , k of a multicomponent s-out-of-k system for exponentiated Gumbel distribution is considered. An s-out-of-k system means a system with total k components and the system can survive only when atleast s of the total components function properly. The ability of the system to overcome the experiencing stress with its strength is termed as its stress–strengh reliability. The maximum likelihood estimator and Bayes estimator for $ R_{s,k} $ R s , k are obtained. The Bayes estimators are obtained using Markov chain Monte Carlo(MCMC) method under both symmetric and asymmetric loss functions. The loss functions we considered are squared error loss function, LINEX loss function and entropy loss function. The asymptotic, bootstrap and highest posterior density(HPD) confidence intervals for $ R_{s,k} $ R s , k are also obtained. A simulation study is conducted for evaluating the efficiency of the estimators derived in this paper. Real data sets are also considered for illustration. [ABSTRACT FROM AUTHOR]

The two-parameter Rayleigh distribution, as an extended distribution of the Rayleigh distribution, has been widely applied in reliability analysis. With the introduction of the location parameter, two-parameter Rayleigh distribution becomes more flexible in fitting real-data. In this paper, based on generalized progressively hybrid censored(GPHC) sample from the two-parameter Rayleigh distribution, Classical and Bayesian inferences are discussed. The Newton-Raphson(NR) and Expectation-Maximization(EM) algorithms are used to compute the maximum likelihood estimates(MLEs). As well as the asymptotic confidence interval(ACI) estimation is obtained through the asymptotic distribution theory of maximum likelihood estimation(MLE) and computation of the observed Fisher information matrix. In Bayesian frame, the estimation of unknown parameters and prediction of future observable are taken into consideration. Due to Bayesian estimation is challenging to compute precisely and for the purpose of comparison, the Lindley's approximation, the Tierney-Kadane(TK) approximation and Markov chain Monte Carlo(MCMC) method are employed to obtain Bayesian estimates. Then, combining the MCMC algorithm mentioned in the article, the one- and two- samples Bayesian prediction are obtained. Finally, the simulation results are provided and a real-life data set is used for illustration purpose. [ABSTRACT FROM AUTHOR]

Ranked set sampling (RSS) has been proved to be an efficient sampling design for parametric and nonparametric inference. This paper explores inference for a maximum RSS procedure with unequal samples (MRSSU) with multiple dependent failure causes. When the lifetimes of units are characterized by a proposed complementary competing risks model, classical likelihood and Bayesian approaches are discussed for parameters and reliability estimation. Maximum likelihood estimators of model parameters and associated existence and uniqueness are established, and approximate confidence intervals are constructed using asymptotic theory and delta methods. With respect to general flexible priors, Bayesian estimates of interested quantities are also performed and a Monte Carlo sampling algorithm is proposed for complex posterior computation. Additionally, when extra historical information between the competing risks parameters is available, likelihood and Bayesian estimation are also studied under an order restriction case. Different methods are compared based on extensive simulation studies, and another real data example is demonstrated for application propose. [ABSTRACT FROM AUTHOR]

In this paper, we focus on Bayesian estimation of the parameters in the geometric process (GP) in which the first occurrence time of an event is assumed to have Weibull distribution. The Bayesian estimators are derived based on both symmetric (Squared Error) and asymmetric (General Entropy, LINEX) loss functions. Since the Bayesian estimators of unknown parameters cannot be obtained analytically, Lindley's approximation and the Markov Chain Monte Carlo (MCMC) methods are applied to compute the Bayesian estimates. Furthermore, by using the MCMC methods, credible intervals of the parameters are constructed. Maximum likelihood (ML) estimators are also derived for unknown parameters. The confidence intervals of the parameters are obtained based on an asymptotic distribution of ML estimators. Moreover, the performances of the proposed Bayesian estimators are compared with the corresponding ML, modified moment and modified maximum likelihood estimators through an extensive simulation study. Finally, analyses of two different real data sets are presented for illustrative purposes. [ABSTRACT FROM AUTHOR]

In this paper, the Bayesian and non-Bayesian estimation of $$\psi = P(X \gt Y)$$ ψ = P (X > Y) based on the progressively first-failure censored data is considered. The $$X$$ X and $$Y$$ Y are strength and stress random variables and follow the Topp-Leone distributions, respectively. The maximum likelihood and Bayes estimators of $$\psi $$ ψ are derived. The Bayes estimators under generalized entropy loss function are computed using Lindley's approximation and Gibbs sampling methods. Different interval estimates like asymptotic, bootstrap confidence, Bayesian credible, and highest posterior density credible intervals of $$\psi $$ ψ are constructed. Furthermore, a Monte Carlo numerical study is conducted to check the performance of various estimators developed. Finally, an application of algorithm real data is considered for illustrative purposes. [ABSTRACT FROM AUTHOR]

The competing risks model plays an important role in the statistical analysis of engineering, econometric, biological and other fields. A tested product may fail from different causes. Therefore, these failure causes as if competing with each other to bring about the failure of tested products (an experimental unit). Hence, in the statistical literature, this is known as the competing risk problem and it has been studied quite extensively by several researchers when the lifetime of the product is the latent failure time of the first failure cause among all the possible failure causes. In this paper, a competing risks model based on a generalized progressive hybrid type-I (GPH type-I) censoring is considered when the latent lifetime distributions of failure causes are inverse Weibull (IW) distributed and partially observed. We established various estimation methods including Maximum likelihood estimates (MLEs) and Bayes estimates (BEs). MLEs with the corresponding asymptotic confidence intervals are obtained. Bayes estimates of the parameters are obtained based on squared error loss (SEL) function under the assumption of independent gamma priors. Furthermore, we applied Markov Chain Monte Carlo (MCMC) techniques to compute BEs and to calculate the credible intervals. Finally, simulation studies and real data set are used for illustrative purpose. [ABSTRACT FROM AUTHOR]

In this paper, we consider the estimation of a multicomponent stress–strength reliability when stress and strength variables follow unit Bur XII distribution. In estimation procedure, the maximum likelihood and Bayesian methods are used. The maximum likelihood estimator is obtained via iterative methods. The asymptotic confidence interval is constructed using asymptotic properties of the corresponding estimator. In addition, two bootstrap confidence intervals are constructed. Bayesian estimator is obtained using three different approximation methods: Lindley's approximation, Tierney–Kadane approximation and Markov Chain Monte Carlo method. The interval estimation based on Bayesian method is studied. The simulation study is conducted to investigate and compare the performance of the considered methods. Finally, an original data set, general dam occupancy rate of Istanbul, Turkey obtained from Istanbul Statistic Office, is analysed in the concept of multicomponent stress–strength reliability. [ABSTRACT FROM AUTHOR]

This paper discusses inferential approaches for the problem of constant-stress accelerated life testing when the failure data are progressive type-I interval censored. Both frequentist and Bayesian estimations are carried out under the assumption that the log-normal location parameter is nonconstant and follows a log-linear life-stress model. The confidence intervals of unknown parameters are also constructed based on asymptotic theory and Bayesian techniques. An analysis of a real data set is combined with a Monte Carlo simulation to provide a thorough assessment of the proposed methods. [ABSTRACT FROM AUTHOR]

Modeling the failure times of processors and memories in computers is crucial for ensuring the reliability and robustness of data science workflows. By understanding the failure characteristics of the hardware components, data scientists can develop strategies to mitigate the impact of failures on their computations, and design systems that are more fault-tolerant and resilient. In particular, failure time modeling allows data scientists to predict the likelihood and frequency of hardware failures, which can help inform decisions about system design and resource allocation. In this paper, we aimed to model the failure times of processors and memories of computers; this was performed by formulating a new type of bivariate model using the copula function. The modified extended exponential distribution is the suggested lifetime of the experimental units. It was shown that the new bivariate model has many important properties, which are presented in this work. The inferential statistics for the distribution parameters were obtained under the assumption of a Type-II censored sampling scheme. Therefore, point and interval estimation were observed using the maximum likelihood and the Bayesian estimation methods. Additionally, bootstrap confidence intervals were calculated. Numerical analysis via the Markov Chain Monte Carlo method was performed. Finally, a real data example of processors and memories failure time was examined and the efficiency of the new bivariate distribution of fitting the data sample was observed by comparing it with other bivariate models. [ABSTRACT FROM AUTHOR]

There are many situations in reliability or medical studies, where items may fail due to one of several causes. Further, censoring is unavoidable in any life testing. In this paper attempts to estimate problem for the competing risks model where the data are adaptive type-II progressive hybrid censored scheme and follow the inverse Weibull distribution. In this regards, we obtain the maximum likelihood estimation of the parameters and the asymptotic confidence intervals for the unknown parameters. Further, Bayes estimates of the parameters which obtained based on squared error and LINEX loss functions under the assumptions of independent gamma priors. For Bayesian estimation, we take advantage of Markov Chain Monte Carlo techniques by applying the Metropolis-Hasting algorithm under the square error and LINEX loss function to derive Bayesian estimators. Finally, two data sets with a Monte Carlo simulation study and a real data set of the electronic applications are analyzed for illustrative purposes. [ABSTRACT FROM AUTHOR]

The ranked set sampling (RSS) is an efficient and flexible sampling method. Based on a modified RSS named minimum ranked set sampling samples (MinRSSU), inference of a dependent competing risks model is proposed in this paper. Then, Marshall–Olkin bivariate distribution model is used to describe the dependence of competing risks. When the competing risks data follow the proportional hazard rate distribution, a dependent competing risks model based on MinRSSU sampling is constructed. In addition, the model parameters and reliability indices were estimated by the classical and Bayesian method. Maximum likelihood estimators and corresponding asymptotic confidence intervals are constructed by using asymptotic theory. In addition, the Bayesian estimator and highest posterior density credible intervals are established under the general prior. Furthermore, according to E-Bayesian theory, the point and interval estimators of model parameters and reliability indices are obtained by a sampling algorithm. Finally, extensive simulation studies and a real-life example are presented for illustrations. [ABSTRACT FROM AUTHOR]

The aim of the present paper is to deal with the analysis of the classical and Bayesian estimation of various measures of system effectiveness in a two non-identical unit parallel system. Each unit has two possible modes Normal (N) and total failure (F). A single repairman is always available with the system and after working for a random period he goes for rest for a random period. After taking complete rest he again starts the repair of the failed unit on a pre-emptive repeat basis. The system failure occurs when both the units are in (F-mode). The distributions of failure time as well as working and rest time of repairman are assumed to be exponential whereas repair time and rest time distribution of repairman are taken as general. A simulation study is also conducted for analysing the considered system model both in Classical and Bayesian setups. Bayesian estimates of various measure of system effectiveness are also obtained by taking different priors. The comparative study is made to judge the performance of Maximum likelihood estimation and Bayesian estimation methods. A simulation study at the end exhibits the behaviour of such a system. The Monte-Carlo technique is employed to draw observations for this simulation study. To obtain various interesting measure of system effectiveness technique have used the Regenerative point technique, MCMC technique and Gibbs sampler technique. From the graphs and tables we have drawn various important conclusions such that a smaller value of failure rate 1 introduces a larger value of Maximum likelihood estimate and Bayes estimates for fixed value of the parameter of the repairman rest time distribution. Moreso, when the value of the failure rate 1 increases the mean time to system failure and net expected profit are also decreases. To compare the performance of asymptotic confidence interval and highest posterior density interval with the maximum likelihood estimates technique, it has been observed that width of the highest posterior density interval is less than the width of an asymptotic confidence interval. [ABSTRACT FROM AUTHOR]

The aim of the paper is to estimate the unknown parameters of weighted exponential distribution based on the competing risks model under progressively Type-II censoring. It is supposed that the latent causes of failures have weighted exponential distributions with different parameters. The maximum likelihood estimations of four unknown parameters are derived and the uniqueness and existence of them are theoretically proved. Moreover, approximate intervals are proposed and constructed with the delta method and Fisher information matrix. Bootstrap methods are also applied to calculate the confidence intervals. Furthermore, Bayes estimates and the corresponding credible intervals under three various loss functions are computed by using the Monte Carlo Markov Chain method. A simulation study is conducted to assess the statistical performance of all the estimators. Ultimately, real data analysis is provided to illustrate all the statistical inferential procedures developed in the paper. [ABSTRACT FROM AUTHOR]

Comparative life tests of a life product have received considerable attention in the past few years for measuring the relative merits of a product in competing duration. In this paper, we are adopting the problem of estimation and prediction of Rayleigh lifetime distributions under joint Type-I censoring scheme. The point and interval estimation is formulated with maximum likelihood and the Bayes methods for the unknown parameters. Also, Bayesian approach is applied in viewpoint both point and interval prediction. The results of estimation and prediction are discussed through analysis the set of real data and bulding Monte-Carlo simulation studies. Finally, we built a numerical discussion of the most important results and future recommendations. [ABSTRACT FROM AUTHOR]

Generally, the analysis of a lifetime data to quantify the life characteristics of the product done under normal conditions. The engineers for some reasons may be needed to obtain the reliability results more quickly then, accelerated life tests are applied. In this paper, we adopted partially step-stress accelerated life tests model of product has the generalized half-logistic lifetime distribution. This model is applied on a solar lighting device and the stress factor consider to be temperature. Also, to save the minimum and maximum ideal test time, we applied the generalized type-II hybrid censoring scheme. The parameters of the proposed model are estimated by maximum likelihood and Bayes methods for point and corresponding interval estimators. The validity of results is tested under formulation Monte-Carlo simulation study. The proposed model is applied on analysis data obtained from solar lighting device as real data set for illustrative purposes. [ABSTRACT FROM AUTHOR]

In this paper, by including a trigonometric function, we propose a family of heavy-tailed distribution called the arcsine Kumaraswamy generalized-X family of distributions. Based on the proposed approach, a four-parameter extension of the Lomax distribution called the arcsine Kumaraswamy generalized Lomax (ASKUG-LOMAX) distribution is discussed in detail. Maximum likelihood, bootstrap, and Bayesian estimation are used to estimate the model parameters. A simulation study is used to evaluate ASKUG-LOMAX performance. The flexibility and usefulness of the proposed ASKUG-LOMAX distribution to predict unique symmetric and asymmetric patterns is demonstrated by analyzing real data. The results show that the ASKUG-LOMAX model is a good candidate for analyzing claims based on heavy-tailed data. [ABSTRACT FROM AUTHOR]

In this paper, the estimation of the unknown parameters of the inverted modified Lindley distribution using the concept of dual generalized order statistics is investigated from both classical and Bayesian viewpoints. Based on this considered distribution, first, the maximum likelihood estimator and approximate confidence interval of the model parameter are obtained using order statistics and lower record values. Next, we consider Bayes estimation under the symmetric loss function using a gamma prior. We also derived the highest posterior density credible interval based on the Metropolis–Hastings algorithm. Moreover, the results for single and product moments based on dual generalized order statistics using this distribution are derived. Based on order statistics and lower record values, Monte Carlo simulations are carried out to examine the enforcement of the proposed estimators, and a dataset is investigated for both order statistics and lower record values for illustrative purposes. [ABSTRACT FROM AUTHOR]

Here in this paper, we consider the progressive Type-II censoring Gompertz data under competing risks model with binomial removals. The maximum likelihood estimators of the model parameters involved are obtained by applying numerical methods and the asymptotic variance-covariance matrix of the estimates is also derived. Bayesian estimates based on importance sampling procedure are developed under squared error, LINEX and general entropy loss functions. The confidence intervals using the asymptotic normality and Bayesian approaches are also developed. Finally, a Monte Carlo simulation is conducted to evaluate the performance of the so proposed estimators under all these different estimation methods. [ABSTRACT FROM AUTHOR]

In this paper, classical and Bayesian estimation for the parameters and the reliability function for the generalized logarithmic transformation exponential (GLTE) distribution has been proposed when the life-times are progressively censored. The maximum likelihood estimator of unknown parameters and their corresponding reliability function are obtained under the classical setup. The Bayes estimators are obtained for symmetric (squared error) and asymmetric (LINEX and general entropy) loss functions. This was achieved by considering discrete prior for the scale parameter and conditional gamma prior for the shape parameter. Interval estimation of the unknown parameters and reliability function for classical and Bayesian schemes is also considered. The performances of various derived estimators are recorded using simulation study for different sample sizes and progressive censoring schemes. Finally, the COVID-19 mortality data sets are provided to illustrate the computation of various estimators. [ABSTRACT FROM AUTHOR]

In this paper, we first introduce the exponentiated generalized alpha power family of distributions to extend several other distributions. We use the new family and develop a new distribution, called the exponentiated generalized alpha power exponential (EGAPEx) distribution. The proposed EGAPEx distribution provides greater flexibility in modeling data from a practical point of view. The new model includes the exponential; alpha power exponential; alpha power generalized exponential, generalized exponential, standardized generalized exponential and exponentiated generalized exponential distributions as a special cases. This distribution exhibits four hazard rate shapes such as L shaped, increasing, decreasing, and upside-down bathtub. Some statistical properties of the EGAPEx distribution are obtained. The model parameters are obtained by maximum likelihood, maximum product spacing, and Bayesian estimation methods. In addition, we have obtained approximate confidence intervals, two bootstrap confidence intervals, and Bayes credible intervals. A Monte Carlo Simulation is performed to compare the different methods of estimation. We illustrate the performance of the proposed distribution through two real data sets; one is related to economic data and another is failure time data and the data sets show the proposed distribution is superior in its ability to model the data sets as compared to the exponentiated generalized exponential, alpha power generalized exponential, alpha power exponential, generalized exponential and exponential distributions. [ABSTRACT FROM AUTHOR]

In this paper, a study of the stress-strength reliability model is introduced subject to the exponentiated power generalized Weibull distribution. The maximum likelihood estimator for the stress-strength reliability function is deduced. The asymptotic confidence interval for the stressstrength reliability function is derived. The fuzzy stressstrength reliability function is discussed using the triangular membership function. A Bayesian estimator for the stressstrength reliability function is deduced. A real data application is introduced to show the results for the stress-strength model based on real data and compare the use of exponentiated power generalized Weibull distribution with existing distributions. [ABSTRACT FROM AUTHOR]

In this paper, based on an adaptive Type-II progressive censoring scheme, estimation of flexible Weibull extension-Burr XII distribution is discussed. Maximum likelihood estimation and asymptotic confidence intervals of the unknown parameters are obtained. The adaptive Metropolis (AM) method is applied to carry out a Bayesian estimation procedure under symmetric and asymmetric loss functions and calculate the credible intervals. A simulation study is carried out to assess the performance of the estimators. Finally, a real life data set is used for illustration purpose. [ABSTRACT FROM AUTHOR]

In this paper, we consider inference problems including estimation for a Rayleigh Pareto distribution under progressively type-II right censored data. We use two approaches, the classical maximum likelihood approach and the Bayesian approach for estimating the distribution parameters and the reliability characteristics. Bayes estimators and corresponding posterior risks (PR) have been derived using different loss functions (symmetric and asymmetric). The estimators cannot be obtained explicitly, so we use the method of Monte Carlo. Also we use the integrated mean square error (IMSE) and the Pitman closeness criterion to compare the results of the two methods. Finally, a real data set has been analyzed to investigate the applicability and the usefulness of the proposed model. [ABSTRACT FROM AUTHOR]

In this paper, based on combined Type-II censored samples, an exponential form for the underlaying distributions is considered for estimating the unknown parameters using the maximum likelihood and Bayesian methods. Three loss functions are used to derive the Bayesian estimators. Also, the Bayesian prediction for the order statistics from a future sample is calculated. Moreover, the results of the exponential and Pareto distributions are presented as illustrative examples. Finally, for illustrating all the inferential methods discussed in this paper, Monte Carlo simulation and data analysis for the exponential distribution are presented. [ABSTRACT FROM AUTHOR]

In this paper, we consider Marshall-Olkin extended exponential (MOEE) distribution which is capable of modelling various shapes of failure rates and aging criteria. The purpose of this paper is three fold. First, we derive the maximum likelihood estimators of the unknown parameters and the observed the Fisher information matrix from progressively type-II censored data. Next, the Bayes estimates are evaluated by applying Lindley’s approximation method and Markov Chain Monte Carlo method under the squared error loss function. We have performed a simulation study in order to compare the proposed Bayes estimators with the maximum likelihood estimators. We also compute 95% asymptotic confidence interval and symmetric credible interval along with the coverage probability. Third, we consider one-sample and two-sample prediction problems based on the observed sample and provide appropriate predictive intervals under classical as well as Bayesian framework. Finally, we analyse a real data set to illustrate the results derived. [ABSTRACT FROM AUTHOR]

In this paper, based on hybrid censored sample from a two parameter exponentiated half logistic distribution, we consider the problem of estimating the unknown parameters using frequentist and Bayesian approaches. Expectation-Maximization, Lindley's approximation and Metropolis-Hastings algorithms are used for obtaining point estimators and corresponding confidence intervals for the shape and scale parameters involved in the underlying model. Data analyses involving the survival times of patients suffering from cancer diseases and treated radiotherapy and/or chemotherapy have been performed. Finally, numerical simulation study was conducted to assess the performances of the so developed methods and conclusions on our findings are reported. [ABSTRACT FROM AUTHOR]

In this paper, the shape parameters, reliability and hazard rate functions of the inverted Kumaraswamy distribution are estimated using maximum likelihood and Bayesian methods based on dual generalized order statistics. The Bayes estimators are derived under the squared error loss function as a symmetric loss function and the linear-exponential loss function as an asymmetric loss function based on dual generalized order statistics. Confidence and credible intervals for the parameters, reliability and hazard rate functions are obtained. All results are specialized to lower record values, also a numerical study is presented to illustrate the theoretical procedures. [ABSTRACT FROM AUTHOR]

In a different area of life testing, designing experiments needs higher stress level than normal stress one. Also, the time to failure of experimental units is resulted by one of a fetal risk factors, only. In this paper, we adopted partially step-stress accelerates life-tests (ALTs) model on the Lomax lifetime unites under the two different risk factors with type-I censoring scheme. Under this assumption, we will estimate the Lomax parameters as well as accelerated factor by maximum likelihood method, point and asymptotic confidence intervals. Also, the Bayesian MCMC approach is used in obtaining point and credible interval estimations. Theoretical results are discussed and assessed through data analysis and Monte Carlo simulation study. comments. [ABSTRACT FROM AUTHOR]

In this paper, Burr-X distribution with unified hybrid censored data is considered. The maximum likelihood method, the Bayesian and the E-Bayesian (the expectation of the Bayesian estimate) approaches are studied for the distribution parameter and the associated reliability function. The Bayesian and the E-Bayesian estimates are derived under LINEX and squared error loss (SEL) functions. We apply Markov chain Monte Carlo (MCMC) techniques to derive the Bayesian and the E-Bayesian estimates. Also, confidence intervals (CIs) of the maximum likelihood estimates, as well as credible intervals (CRIs) of the Bayesian and the E-Bayesian estimates, are computed. On the other hand, an example of a real data set is provided for the purpose of illustration. Finally, a numerical comparison among the proposed methods is performed. [ABSTRACT FROM AUTHOR]

In this paper, we investigate a new model based on Burr X and Fréchet distributions for extreme values and derive some of its properties. Maximum likelihood estimation along with asymptotic confidence intervals is considered for estimating the parameters of the distribution. We demonstrate empirically the flexibility of the distribution in modeling various types of real data. Furthermore, we also provide Bayes estimators and highest posterior density (HPD) intervals of the parameters of the distribution using Markov Chain Monte Carlo (MCMC) methods. [ABSTRACT FROM AUTHOR]

In this paper, based on progressively Type-II censored samples, the problem of estimation of multicomponent stress–strength reliability under generalized half-normal (GHN) distribution is considered. The reliability of a k-component stress-strength system is estimated when both stress and strength variates are assumed to have a GHN distribution with various cases of same and different shape and scale parameters. Different methods such as the maximum likelihood estimates (MLEs) and Bayes estimation are discussed. The expectation maximization algorithm and approximate maximum likelihood methods are proposed to compute the MLE of reliability. The Lindley's approximation method, as well as Metropolis–Hastings algorithm, are applied to compute Bayes estimates. The performance of the proposed procedures is also demonstrated via a Monte Carlo simulation study and an illustrative example. [ABSTRACT FROM AUTHOR]

In this paper, maximum likelihood and Bayesian methods of estimation are used to estimate the unknown parameters of two Weibull populations with the same shape parameter under joint progressive Type-I (JPT-I) censoring scheme. Bayes estimates of the parameters are obtained based on squared error and LINEX loss functions under the assumption of independent gamma priors. We propose to apply Markov Chain Monte Carlo (MCMC) technique to carry out a Bayesian estimation procedure. The approximate confidence intervals and the credible intervals for the unknown parameters are also obtained. Finally, we analyze a one real data set for illustration purpose. [ABSTRACT FROM AUTHOR]

This paper discusses maximum likelihood and Bayes estimation of the two unknown parameters of Nadarajah and Haghighi distribution based on record values. Different Bayes estimates are derived under squared error, balanced squared error and general entropy loss functions by using Jeffreys' prior information and extension of Jeffreys' prior information. It is observed that the associated posterior distribution appears in an intractable form. So, we have used Tierney and Kadane approximation method to compute these estimates. Finally, numerical computations are presented based on generated record values using R software. [ABSTRACT FROM AUTHOR]

In this paper we consider the estimation of the Weibull Generalized Exponential Distribution (WGED) Parameters with Progressive Censoring Schemes. In order to obtain the optimal censoring scheme for WGED, more than one method of estimation was used to reach a better scheme with the best method of estimation. The maximum likelihood method and the method of Bayesian estimation for (square error and Linex) loss function have been used. Monte carlo simulation is used for comparison between the two methods of estimation under censoring schemes. To show how the schemes work in practice; we analyze a strength data for single carbon fibers as a case of real data. [ABSTRACT FROM AUTHOR]

This paper deals with the problem of estimating unknown parameters of the Burr XII distribution under classical and Bayesian approaches when samples are observed under progressive type-I interval censoring. Under classical approach we employ the stochastic expectation maximization algorithm to obtain maximum likelihood estimators for the unknown parameters and also compute associated interval estimates. Further under Bayesian approach we obtain Bayes estimators with respect to different symmetric, asymmetric and balanced loss functions. In this regard we use Tierney–Kadane and Metropolis–Hastings (MH) algorithm. For illustration purpose we analyse a real data set and conduct a Monte Carlo simulation study to observe the performance of the proposed estimators. Finally we present a discussion on inspection times and optimal censoring. [ABSTRACT FROM PUBLISHER]

In this paper, based on an adaptive Type-II progressively censored sample from the generalized exponential distribution, the maximum likelihood and Bayesian estimators are derived for the unknown parameters as well as the reliability and hazard functions. Also, the approximate confidence intervals of the unknown parameters, and the reliability and hazard functions are calculated. Markov chain Monte Carlo method is applied to carry out a Bayesian estimation procedure and in turn calculate the credible intervals. Moreover, results from simulation studies assessing the performance of our proposed method are included. Finally, an illustrative example using real data set is presented for illustrating all the inferential procedures developed here. [ABSTRACT FROM AUTHOR]

In this paper inverted Kumaraswamy distribution is introduced. Some of its properties are presented through, some models of stress strength, measures of central tendency and dispersion and order statistics. Some sub-models, limiting distributions and the relation between inverted Kumaraswamy and other distributions are derived. The maximum likelihood and Bayes estimators, confidence intervals for the parameters, the reliability and the hazard rate functions of the inverted Kumaraswamy distribution based on Type II censored samples are obtained. A numerical study is carried out to illustrate the theoretical results for both approaches, the maximum likelihood and the Bayesian estimation. Moreover, the results are applied on real data. [ABSTRACT FROM AUTHOR]

In this paper, for Weibull subfamily of Morgenstern family, the joint density of the concomitants of generalized order statistics (GOS 's) is used to obtain the maximum likelihood estimates (MLE) and Bayes estimates for the distribution parameters. Applications of these results for concomitants of order statistics are presented. [ABSTRACT FROM AUTHOR]

In this paper, based on a jointly type-II censored sample from two exponential populations, the Bayesian inference for the two unknown parameters are developed with the use of squared-error, linear-exponential and general entropy loss functions. The problem of predicting the future failure times, both point and interval prediction, based on the observed joint type-II censored data, is also addressed from a Bayesian viewpoint. A Monte Carlo simulation study is conducted to compare the Bayesian estimators with the maximum likelihood estimator developed by Balakrishnan and Rasouli [Exact likelihood inference for two exponential populations under joint type-II censoring. Comput Stat Data Anal. 2008;52:2725–2738]. Finally, a numerical example is utilized for the purpose of illustration. [ABSTRACT FROM AUTHOR]

Abstract: In this paper, we investigate the problem of point and interval estimations for the modified Weibull distribution (MWD) using progressively type-II censored sample. The maximum likelihood (ML), Bayes, and parametric bootstrap methods are used for estimating the unknown parameters as well as some lifetime parameters (reliability and hazard functions). Also, we propose to apply Markov chain Monte Carlo (MCMC) technique to carry out a Bayesian estimation procedure. Bayes estimates and the credible intervals are obtained under the assumptions of informative and noninformative priors. The results of Bayes method are obtained under both the balanced squared error loss (bSEL) and balanced linear-exponential (bLINEX) loss. We show that these loss functions are more general, which include the MLE and both symmetric and asymmetric Bayes estimates as special cases. Finally, Two real data sets have been analyzed for illustrative purposes. [Copyright &y& Elsevier]

Entropy measures the uncertainty associated with a random variable. It has important applications in cybernetics, probability theory, astrophysics, life sciences and other fields. Recently, many authors focused on the estimation of entropy with different life distributions. However, the estimation of entropy for the generalized Bilal (GB) distribution has not yet been involved. In this paper, we consider the estimation of the entropy and the parameters with GB distribution based on adaptive Type-II progressive hybrid censored data. Maximum likelihood estimation of the entropy and the parameters are obtained using the Newton–Raphson iteration method. Bayesian estimations under different loss functions are provided with the help of Lindley's approximation. The approximate confidence interval and the Bayesian credible interval of the parameters and entropy are obtained by using the delta and Markov chain Monte Carlo (MCMC) methods, respectively. Monte Carlo simulation studies are carried out to observe the performances of the different point and interval estimations. Finally, a real data set has been analyzed for illustrative purposes. [ABSTRACT FROM AUTHOR]

In this paper, we consider the analysis of Burr XII distribution based on the competing risks model under progressive Type-II censoring, where the amount of units withdrawn at each stage is assumed to be random and subject to a binomial distribution. The maximum likelihood estimations of unknown parameters are derived and their existence and uniqueness are proved as well. Furthermore, approximate confidence intervals are also constructed by using the observed Fisher information matrix and delta method. Moreover, Bayes estimators and associated credible intervals under different loss functions are obtained based on MCMC method. In addition, simulation study used to evaluate the performance of all estimators proposed is included. Finally, a practical data example is given to illustrate all the inferential processes developed here. [ABSTRACT FROM AUTHOR]

This paper attempts to estimate the parameters for the two-parameter Rayleigh distribution based on adaptive Type II progressive hybrid censored data with competing risks. Firstly, the maximum likelihood function and the maximum likelihood estimators are derived before the existence and uniqueness of the latter are proven. Further, Bayesian estimators are considered under symmetric and asymmetric loss functions, that is the squared error loss function, the LINEXloss function, and the general entropy loss function. As the Bayesian estimators cannot be obtained explicitly, the Lindley method is applied to compute the approximate Bayesian estimates. Finally, a simulation study is conducted, and a real dataset is analyzed for illustrative purposes. [ABSTRACT FROM AUTHOR]

Bayesian estimation of the parameters in beta mixture models (BMM) is analytically intractable. The numerical solutions to simulate the posterior distribution are available, but incur high computational cost. In this paper, we introduce an approximation to the prior/posterior distribution of the parameters in the beta distribution and propose an analytically tractable (closed form) Bayesian approach to the parameter estimation. The approach is based on the variational inference (VI) framework. Following the principles of the VI framework and utilizing the relative convexity bound, the extended factorized approximation method is applied to approximate the distribution of the parameters in BMM. In a fully Bayesian model where all of the parameters of the BMM are considered as variables and assigned proper distributions, our approach can asymptotically find the optimal estimate of the parameters posterior distribution. Also, the model complexity can be determined based on the data. The closed-form solution is proposed so that no iterative numerical calculation is required. Meanwhile, our approach avoids the drawback of overfitting in the conventional expectation maximization algorithm. The good performance of this approach is verified by experiments with both synthetic and real data. [ABSTRACT FROM AUTHOR]