Search

Graphene-based nanomaterials possess broad applications because of their excellent multi-functional properties. In this work, a facile self-assembling method was presented for preparing one kind of graphene oxide-based paper/hollow microspheres hybrid. It was found that most of the hollow microspheres can strongly anchored on the surface of graphene oxide paper (GOP) by an in-situ scanning electron microscope peeling testing combining with molecular dynamics (MD) simulation. In addition, the uniform distribution of hollow microspheres on the surface of GOP cannot only provide a better surface wettability, but also can effectively improve the interfacial stress-transfer capability between such hybrid and polymer matrix. Our work provides a guidance for the structural designs of graphene-based nanomaterials and broaden their applications.

Cellulose paper, a material that is naturally derived, low cost, lightweight, eco-friendly, and mechanically deformable, plays important roles in producing next-generation flexible electronics. Following the booms in the development of functional electronics, the soft actuators built from cellulose paper have attracted great attention. In this focused review, the milestones and recent achievements of cellulose paper-based actuators are summarized. Electro-, thermal, moisture and magnetic actuation mechanisms are utilized to acquire energy from external stimuli. Corresponding functional materials and available fabrication techniques like film assembly and layer deposition are described. Programmable actions for the emerging applications in bionics, paper grippers and robots are realized by pursuing different strategies to control the responding deformation. Along with a conclusion, the existing challenges and possible solutions in evaluating and improving the performance of cellulose paper are summarized in the final section.

Environmentally friendly and energy saving treatment of black liquor (BL), a massively produced waste in Kraft papermaking process, still remains a big challenge. Here, by adopting a Ni CaO Ca12Al14O33 bifunctional catalyst derived from hydrotalcite-like materials, we demonstrate the feasibility of producing high-purity H2 (∼96%) with 0.9 mol H2 mol−1 C yield via the sorption enhanced steam reforming (SESR) of BL. The SESRBL performance in terms of H2 production maintained stable for 5 cycles, but declined from the 6th cycle. XRD, Raman spectroscopy, elemental analysis and energy dispersive techniques were employed to rationalize the deactivation of the catalyst. It was revealed that gradual sintering and agglomeration of Ni and CaO and associated coking played important roles in catalyst deactivation and performance degradation of SESRBL, while deposition of Na and K from the BL might also be responsible for the declined performance. On the other hand, it was demonstrated that the SESRBL process could effectively reduce the emission of sulfur species by storing it as CaSO3. Our results highlight a promising alternative for BL treatment and H2 production, thereby being beneficial for pollution control and environment governance in the context of mitigation of climate change.

Coatings based on pigment and polymer binders are applied on paper surfaces to improve their surface, optical, and printing properties. Besides the coating composition, the structure and properties of the coated papers are influenced by the coating layer consolidation upon drying. In this study, the influence of drying conditions on the structure and properties of coating layers based on natural pigments (clay) and polymer binders (butadiene acrylonitrile latex) has been analyzed. Using a laboratory rod Mayer device, the coatings were applied as thin layer (about 15&ndash, 16 g/m2) on the paper surface and samples of coated paper were dried at 20 and 105 &deg, C temperatures. The optical, structural, and water absorption properties of the coating layer were evaluated by the measurement of gloss, opacity, void fraction, light scattering, and contact angle. The obtained results highlighted that both the drying temperature and latex content in the coating color have a synergic effect on the coated paper quality.

info:eu-repo/grantAgreement/EC/H2020/787410/EU The work was also partially funded by the Nanomark collaborative project between INCM (Imprensa Nacional - Casa da Moeda). Publisher Copyright: © 2021 The Author(s). Published by IOP Publishing Ltd. Titanium dioxide nanoparticles and nanostructured thin films were simultaneously synthesized using a microwave-assisted hydrothermal method. The synthesis formed very fine particles, appearing as nanospheres in the 11 nm size range. As for the nanostructured films, they have displayed similar structural characteristics to the nanoparticles, with thickness of 130 nm. These films covered uniformly and homogenously the Whatman paper, while maintaining its flexibility. The materials processed had their photocatalytic activity assessed from rhodamine B degradation under solar radiation (91% degradation after 40 min for the powder material and 68% after 6 h for the nanostructured thin films). Reusability experiments were also carried out, revealing superior performance concerning the Degussa P25, the most common photocatalyst used. The results of the present work can be thought as an option for the existing photocatalysts activated under solar light, namely for water purification, as it simultaneously produces enhanced photocatalytic powders and photocatalytic papers fully disposable and that can be easily recycled. publishersversion published

Bulk graphitic carbon materials with expanded interlayer spacing and abundant defects may serve as efficient anodes with high areal capacities for sodium-ion batteries (SIBs). However, obtaining long-range order in bulk graphitic carbon materials with expanded interlayer spacing is extremely difficult. Herein, an explosive decomposition method is demonstrated to realize thermally reduced graphene oxide (rGO) paper with tuned interlayer spacing. The in-situ temperature-dependent X-ray diffraction (td-XRD) was utilized to establish the correlation between heating rate and interlayer spacing. Based on td-XRD results, free-standing graphene paper (FSG) was synthesized at 450°C under a high heating rate of 70°C/min. The FSG exhibits a highly porous structure made of graphene flakes with abundant surface epoxy groups with an overall interlayer spacing of 0.38–0.39 nm. The rGO flakes in FSG are separated by large voids that provide fast mass transport pathways and allow expansion/contraction of crystallites upon reversible Na intercalation. The FSG was utilized directly as anodes without any binder and conductive agent and delivered an excellent reversible capacity of 290 mAh/g at a current density of 50 mA/g. Moreover, the FSG exhibited excellent foldability and rollability to create high areal density anodes, delivering an areal capacity of 0.62 mAh/cm2 at a current density of 100 μA/cm2. These results open the door to fabricate graphene material-based carbon anodes with tunable interlayer spacing for high-performance SIBs.

Micro-cracks are inherently present in concrete, leads to debilitation of structures. Methods used for managing micro-cracks have a certain degree of toxicity and also possesses certain drawbacks that made them not completely efficient. Bacterial technique when used in fresh concretes results in calcite precipitation in voids and consequently improves the strength and lowers permeability of concrete. Bio- cement is the combination of Bacillus pasteurii 5% and nutrients Urea, Calcium Lactate 95%. In this study by adding 0.5, 1, 1.5 and 2% Bio- cement by weight of cement and observed compressive strength, flexural strength values after 7 and 28 days of curing for M25 grade of concrete.

Supercapacitors are favored by researchers because of their high power density, especially with the acceleration of people's life rhythm. However, their energy density, especially from the point of view of the whole energy storage device, is far lower than that of commercial batteries. In this work, a kind of customizable full paper-based supercapacitor device with excellent self-healing ability is fabricated by simple and low-cost screen printing, electropolymerization and dip coating methods. The resultant separator-free supercapacitor device exhibits both ultrahigh gravimetric and areal specific energy (power) densities of 39 Wh kg−1 (69 kW kg−1) and 692 μWh cm−2 (236 mW cm−2), achieving excellent supercapacitor performance. Notably, the addition of vitrimers endows the whole device with outstanding self-healing properties, which is helpful for enhancing the adaptability of the device to the environment. In addition, this kind of paper-based device also displays good photothermal and electromagnetic shielding performances. These striking features make paper matrix composites attractive in the fields of supercapacitors, medical photothermal treatment and electromagnetic shielding.

Diesel Particulate filters are considered one of the most efficient technologies to reduce particulate matter emitted by diesel engines. In this paper we study the development of catalytic ceramic papers based on Mn-Ce and their applications as soot particle filters in bench scale tests. Ceramic papers were prepared by a dual polyelectrolyte papermaking method and were impregnated with Mn and Ce precursors through a wet-spray procedure using a commercial fogger. Catalytic ceramic papers were tested as catalysts for the combustion of soot, which was obtained both from the burning of diesel fuel and directly from a bench test. In addition, the filtering capacity of catalytic ceramic papers was tested through opacity measurements by placing the ceramic papers in a suitable case at the end of the engine. Mn-Ce based catalysts were active in the soot combustion. The addition of citric acid considerably improved the catalytic performance of all the systems studied. This beneficial effect of citric acid is related to an improvement in the distribution of the catalytic material onto the ceramic fibers, being the mixed equimolar oxide Mn-Ce the most active catalyst.

A recent commentary by Santhosh and Ravindran on our paper (Int. J. Hydrogen Energy 2014, 39:10606) demonstrated that the interaction between H2 and MXene (Sc2C and Ti2C) phases are not Kubas-type and should be of weak physisorption, and thus made a conclusion that 2D Sc2C and Ti2C are not suitable for practical hydrogen storage applications. In this responses, we recalculated hydrogen adsorption on 2D Sc2C and Ti2C by using different exchange-correlation functionals. And based on the calculated results, bare MXenes (especially the Ti2C) are suitable as hydrogen storage materials at temperatures of several tens degrees lower than room temperature. And the hydrogen adsorptions on the MXenes terminated with oxygen group were also investigated. Among the Ti2C, Sc2C and their oxygen-functional counterparts, the binding energy of H2 on Sc2CO2 surface is the closest to the ideal range of 0.16–0.42 eV/H2 at ambient conditions, and thus the Sc2C with oxygen group is expected to be more suitable as hydrogen storage materials.

Photonic crystals film that possesses periodic dielectric structure have shown great prospect in developing environmentally friendly paper alternatives due to the unique properties of dye free and non-photobleaching, but their practical application is limited by the weak interaction between colloidal particles. Although some progress has been obtained, it is still a challenge to develop photonic paper with the desired mechanical and optical properties. Herein, multifunctional hard core/soft shell nanoparticles with controlled size are fabricated by semi-continuous seed emulsion polymerization method. Compared with convention colloidal particles, these core/shell nanoparticles can facile self-assemble into large-scale dense ordered structure film via dried at room temperature due to the relatively low glass transition temperature (Tg) of the shell layers. The facile fabrication route enables the continuous high-through put production of the photonic papers. The as-formed papers not only possess the capacity to solvent (water/ethanol) rewritable and multicolor painting, but also can rapidly reversible mechanochromic. Moreover, due to the good compatibility of core/shell interface, these photonic films possess excellent mechanical properties, demonstrating that this multifunctional film makes the fabrication of novel robust rewritable papers possible and enables visual monitoring of deformation degree.

Highlights • Numerical simulations of acoustophoresis in pulp flow is conducted. • Parametric study of fiber characteristics, pulp flow regimes and acoustic parameters are conducted. • A feasibility study of industrial acoustophoresis for pulp concentration is performed. • A potential concentration gain of 15% is obtained experimentally., In pulp and paper mills, mechanical processes such as screening and washing are commonly used to remove accumulated solid suspensions and concentrate the pulp. For environmental reasons and to optimize paper production, an emerging challenge is to develop alternative methods to concentrate paper pulp between 3 % and 6 % consistency for which the mixed pulp-water flow is complex. Among the proposed solutions in the literature, solutions based on acoustic levitation, also referred as acoustophoresis, of low-consistency pulp have been demonstrated as a potential solution for efficient pulp concentration and water recirculation. However, no sensitivity analysis on the ultrasound and physical parameters was proposed, limiting the extension to a realistic application. Thus, this paper presents a numerical modeling of acoustophoresis for pulp flow concentration in a pipe. For this purpose, the pulp flow is defined as a pseudo-homogenous fluid with a turbulent Low Re k- ∊ formalism, and the pulp particles are considered spherical and deflected by two acoustic forces, namely the acoustic radiation force and the Stokes drag force, both induced by an ultrasound wave generated along the walls of a circular pipe. The combined action of these two forces in the pulp flow enables to concentrate the particles at the center of the pipe. The influences of particle size and mechanical properties, fluid properties and ultrasound parameters are analyzed within a parametric study to optimize the particle deflection and the pulp concentration. The experimental feasibility of the industrial use of acoustophoresis for the concentration of paper pulp is demonstrated with a concentration gain up to 15 %.

The limited CO2 content in aqueous solution and low adsorption amount of CO2 on catalyst surface lead to poor photocatalytic CO2 reduction activity and selectivity. Herein, the design and fabrication of a novel photocatalytic architecture is reported, accomplished via chemical vapor deposition of polymeric carbon nitride on carbon paper. The as-obtained samples with a hydrophobic surface exhibit excellent CO2 transport and adsorption ability, as well as the building of triphase air-liquid-solid (CO2-H2O-catalyst) joint interfaces, eventually resulting in the inhibition of H2 evolution and great promotion of CO2 reduction with a selectivity of 78.6%. The addition of phosphate to reaction environment makes further improvement of CO2 photoreduction into carbon fuels with a selectivity of 93.8% and an apparent quantum yield of 0.4%. This work provides new insight for constructing efficient photocatalytic architecture of CO2 photoreduction in aqueous solution and demonstrates that phosphate could play a key role in this process.

Flexible paper-based surface enhanced Raman spectroscopy (SERS) substrate has attracted great attention in the sensitive detection of analytes in recent years. However, due to its inherent hydrophilic surface, the nanoparticles will not be concentrated very well on the surface of the paper. This reduces the reproducibility and sensitivity of the paper-based substrate. Herein, we demonstrate flexible hydrophobic paper-based substrate using silver nanocubes loaded on polymethylhydrosiloxane modified filter paper (AgNCs@SiO2/PMHS modified filter paper) to realize high sensitivity and reproducibility. The hydrophobic filter paper was obtained by dip-soaking the filter paper into PMHS solution, resulting in increased contact angle to ~112.5°. The AgNCs@SiO2/PMHS modified paper substrate shows high analytical enhancement factor (AEF) of 6.55 × 106, which is 2.2-fold enhancement compared to AgNCs@SiO2/normal paper substrate, and a low detection limit of 0.1 nM rhodamine 6G and 0.89 nM adenine. The high SERS enhancement factor and sensitivity is attributed to the high hotspots density created in the hydrophobic surface as a result of the excellent uniformity and superior sample collection efficiency compared to the normal filter paper-based substrate. Besides, the substrate shows excellent spot-to-spot and substrate-to-substrate reproducibility, with relative standard deviation (RSD) of 6.05% and 9.22%, respectively. Moreover, the AgNCs@SiO2/PMHS modified filter paper substrate achieved good stability; the Raman signal intensity only drops by 25.88% after 3 months of exposure to air. Therefore, this flexible hydrophobic AgNCs@SiO2/PMHS modified filter paper substrate with low cost fabrication and label-free SERS detection is a promising SERS platform for analytical and biological sensing applications.

Graphene-based papers have recently triggered considerable interests in developing the application as thermal interface materials (TIMs) for addressing the interfacial heat transfer issue, but their low through-plane thermal conductivity (κ⊥), resulting from the layer-by-layer stacked architecture, limits the direct use as TIMs. Although various hybrid graphene papers prepared by combining the graphene sheets and the thermally conductive insertions have been proposed to solve this problem, achieving a satisfactory κ⊥ higher than that of commercial TIMs (>5 W m−1 K−1) remains challenging. Here, a strategy aimed at the construction of heat pathways along the through-plane direction inside the graphene paper for achieving a high κ⊥ was demonstrated through the simultaneous filtration of graphene sheets with two different lateral sizes. The as-prepared graphene paper presented a hierarchical structure composed of loosely stacked horizontal layers formed by large graphene sheets, intercalated by a random arrangement of small graphene sheets. Due to the heat pathways formed by small graphene sheets along the through-plane direction, the hierarchically structured graphene paper exhibited an improved κ⊥ as high as 12.6 W m−1 K−1 after a common graphitization post-treatment. In the practical test, our proposed paper as an all-graphene TIM achieved an enhancement in cooling efficiency of ≈ 2.2 times compared to that of the state-of-the-art TIM, demonstrating its superior performance to meet the ever-increasing heat dissipation requirement.

A flexible Pt/TiO2/γ-Al2O3 nanfiber paper (PTA) was successfully prepared by an electrospinning-coating-NaBH4 reduction method. The catalytic performance for formaldehyde (HCHO) oxidation over PTA with different Pt contents was investigated at room temperature. The results show that PTA exhibits higher catalytic activity and stability than Pt/γ-Al2O3. The TiO2 coating can promote the transformation of intermediate species and the desorption of CO2. The PTA1 with 1 wt% Pt shows the best catalytic activity and good stability. In the view of activity and cost, 0.5 wt% Pt is the optimal Pt content. The TiO2 coating not only plays an important role in improving the activity and stability of PTA, but also acts as a protective shell of γ-Al2O3 fiber, which greatly reduces the risk of alkali etching during preparation and maintains the good flexibility of PTA. The dioxymethylene (DOM), formate/carbonate species, CO are the intermediate species in HCHO oxidation over PTA. In addition, PTA exhibits good filtration performance for fine particles as well as good fluid permeability. Because of the high efficiency and flexibility of PTA composite catalytic material for HCHO oxidation with good filtration performance for fine particles, it will be a promising candidate in air purification.

In this study, eco-friendly and disposable paper-based membraneless microfluidic enzymatic fuel cells (EFCs) were developed without any mediators to reduce the toxicity and cost of EFCs. Glucose oxidase and laccase were immobilized on multi-walled carbon nanotube electrodes to catalyze the redox reaction of glucose and oxygen. Micromachining techniques well-suited for mass production were used to precisely fabricate micro-scale Y-shaped and cross-shaped EFCs. Experimental measurements showed that the concentration of glucose in the fuel solution affects the cell performance, which occurs because the flow speed of the fuel stream decreases as the concentration of glucose increases. The highest performance of power density (104.2 ± 3.35 μW cm−2) and current density (615.6 ± 3.14 μA cm−2) were obtained with the Y-shaped channel configuration at a glucose concentration of 100 mM. This performance is the best of all paper-based single EFCs reported to date. The new paper-based co-laminar flow mediatorless EFC exhibits strong potential to power miniaturized and portable on-site diagnostic devices.

Due to the rapid industrialization, heavy metals contamination in the aquatic environment has become more serious. Thus, it is urgent to develop enhanced removal technology for heavy metals. Graphene oxide (GO) based composite paper-like materials have been widely applied for adsorption of heavy metals from wastewater. Herein, we fabricated for the first time an advanced, highly-ordered and homogenous PVC/PPD/GO paper-like material using a resin-infiltration technique. This process is complimentary to layer-by-layer assembly, where the assembling components are required to interact strongly (e.g., via hydrogen bonding or electrostatic attraction). The results showed that the composite papers could achieve high removal efficiency of the heavy metals from water. The amount of Pb(II) adsorbed at equilibrium as achieved by GO, PVC/GO-0.05, PVC/GO-0.08, PVC/PPD/GO-0.05 and PVC/PPD/GO-0.08 buckypapers were 17.61, 22.17, 25.41, 33.57 and 44.80 mg g−1, respectively. In addition, the effects of experimental factors (e.g. GO content, ionic strength of heavy metal ions, temperature and solution pH) on heavy metal adsorption were discussed. Furthermore, the as-prepared PVC/PPD/GO-0.08 composite papers exhibited superior stability and could be recycled more than 900 h based on their 15 regeneration cycles. The improved heavy metal removal efficiency was attributed to the enhanced morphology and the formation of micro- and nano-channels created by the entangled PPD/GO. The findings indicated that the PVC/PPD/GO composite buckypapers could be used as promising materials for the adsorption of heavy metals from wastewater.

CaV6O16·3H2O three-dimensional (3D) tubular structure has been constructed by a simple hydrothermal method without using any surfactants or additives. The tubular structure is composed of ultralong CaV6O16·3H2O nanobelts with good tailorability. By simply cutting and drying the 3D tubular structure, a CaV6O16·3H2O paper has been successfully prepared. Electrochemical performance of the CaV6O16·3H2O paper as the self-standing cathode for lithium-ion batteries (LIBs) was investigated for the first time. It delivers an initial discharge capacity of 463.9 mAh g−1 at 50 mA g−1 and maintains at 162.3 mAh g−1 after 50 cycles. This work provides the possibility for designing high-performance, long service life and lightweight LIBs for implantable medical devices.

Rational design of photoelectrode architectures is deemed as an effective solution to enhance efficiency of photoelectrochemical water splitting for conquering increasingly prominent environmental problems. Herein, a programmable flexible photoanode with built-in tandem Z-scheme configuration fabricated by in-situ growth of MoSe2-CdS-ZnO array with ultrathin nanosheet-interlaced-nanorod structure on the Au paper electrode, is firstly reported. By taking advantages of the interwoven nanonetwork structure, high conductivity as well as larger porosity of the as-fabricated Au paper electrode, a stable light-harvesting paper chip with fast transfer/separate mediators of the charge/carriers is thus integrated. By virtue of double internal electric fields (IEFs) and photothermal effect, the developed MoSe2-CdS-ZnO photoanode exhibits incident-photon-to-current efficiency of 52 % under 460 nm of light irradiation, and the current density reaches 2.4 mA cm−2 at 0.3 V versus normal hydrogen electrode, which is comparable with respect to current state-of-the-art “type-II-scheme”, “surface-scheme”, and cocatalyst-free photocatalysts (0.03–2.4 mA cm−2). Consequently, the paper-based photoanode achieves admirable photoelectrocatalytic hydrogen generation property (39.7 μmol cm−2 h-1). The synergistic effect of tailorable tandem Z-scheme configuration with double IEFs and delineating of 3D cross-linked network structure of the proposed photoanode in this work may open an avenue for constructing high-performance photoelectrochemical water splitting devices.

We preliminarily examined whether it is possible to visualize synthetic materials applied to the surface of a base material by using near-infrared hyperspectral imaging at wavelengths of 1.0–2.35 µm. We focused on the applicability of this method for visualizing adhesives and varnishes, assessing the effect of underlying colorants on measurements, and selecting the optimal method for data analysis. Experimental samples were adhesive on a painted ceramic plate and varnish on printed paper. We performed correlation analysis, partial least squares regression analysis, linear discriminant analysis, decision tree, KNN and principal component scores 1 and 2 to evaluate the measurement data. The conventional method (visible/near-infrared spectroscopic/fluorescence photographs at wavelengths of 400–1000 nm.) could not visualize the adhesive on the painted ceramic plate or the varnish on the printed paper, whereas the new method could do so. Therefore, this method has the potential to be useful for inspecting the distribution of synthetic materials on the surface of a base material.

After ban on single-use plastics, completely bio-based coating on paper is in great demand to replace the plastics liner and other organic-inorganic hybrid coating. To resolve the issues like moisture, hydrophilicty and repulpability after use, a green, sustainable and hydrophobic bio-coating material for paper substrate has been developed. In this work, silanized castor oil (SCO) and silanized methyl ricinoleate (SMR) bio-resins are synthesized by structural modifications of epoxidized castor oil through transesterification and silanization process, Subsequently, the silylated bio-resins are hydrolysed and subjected to crosslinking with cellulosic paper substrate through condensation process. The coated papers showed hydrophobicity with water contact angle (WCA) up to 97° and strongly moisture resistant (moisture content of 2–3%) nature. Scanning electron microscopy analysis with energy dispersive X-ray spectra confirms the uniform coating of SMR resin with better texture and higher degree of silane grafting. The water vapor transmission rate (WVTR) decreased by 77.5% after coating because of blockage of pores and strong bonding with the cellulosic fibers. Further the coated papers showed adequate thermal stability and better tensile strength for commercial packaging. These coatings are removed by exposing to strong alkali solution at 90 °C and the recyclability potential of the paper is confirmed for reuse. These renewable resourced and eco-friendly coating materials are found to be suitable alternative for paper packaging and other coating applications with circular economy approach.

Integrating graphene with other kinds of biochemical molecules is an effective way to improve the properties of graphene film. Proteins are promising candidates for graphene hybridization. We create an effective method to prepare multifunctional graphene hybrid film by incorporation of antibacterial protamine. Protamine could be stably adsorbed on the surface of GO as both a reductant and an antibiotic to realize antimicrobial protamine/RGO conjugates. The presence of decorated protein layers makes it possible to adjust the physical performance of the composite. The obtained hybrid papers show improved hydrophilic property of reduced GO paper. These freestanding papers have a reversible humidity response shape-memory effect and great antibacterial property. The facile strategy possesses a promising way to develop multifunctional antibacterial materials.

Cellulose-based materials have attracted tremendous interest recently due to their fascinating merits of renewability, biodegradability, and low cost, holding great promise in electromagnetic protection, clean energy harvesting, and thermal management. However, the simple and effective integration of multiple functions into single cellulose material remains a challenge. Herein, we report the fabrication of a multifunctional and superhydrophobic cellulose composite paper (CCP) via coated MXene modified by in-situ polymerized polypyrrole and PDMS/candle soot on the opposite surface of the paper. CCP exhibits high-performance electromagnetic interference shielding effectiveness (~40 dB) while maintaining high electrical conductivity (1467 S/m). Moreover, the superhydrophobic surface of CCP can be used as the hydraulic triboelectric nanogenerator (H-TENG) to harvest water energy due to the liquid–solid contact triboelectrification and electrostatic induction. The hydraulic triboelectric energy can be captured and released when water droplets drop from a height of 2 cm and roll at a tilt angle of 20°, the output current can reach a peak of 0.8 nA. Furthermore, the surface saturation temperature of CCP can reach 140 °C with a low applied voltage of 6 V enabled by the Joule effect. Thus, CCP holds great potentials in applications of integrated smart electronics, clean energy harvesting, and thermal management.

Graphitic layer of carbon has been deposited on the surface of cellulose paper by simple pencil drawing approach. The edges of exfoliated multilayer graphene sheets formed during pencil drawing on the rough paper surface causes the enhancement of electrochemical capacitance. One step chemical polymerization technique has been adopted to fabricate polyaniline nanofibers on hydrophobic pencil drawn graphitic layer on the cellulose paper. These polyaniline coated pencil drawn paper electrodes were used to fabricate all-solid-state symmetric supercpapcitors with superior performance in comparison to similar pencil drawn paper electrodes without polyaniline. All-solid-state symmetric supercapacitor with paper based multilayer graphene-polyaniline nanofiber electrodes exhibits specific capacitance of 28.37 F g−1, areal capacitance of 93.64 mF cm−2, energy density of 8.32 µW h cm−2, and power density of 39.97 µW cm−2. It also shows excellent cyclic stability with initial increment to a maximum value and then decrease to 91.5 % of the maximum value after 5000 cycles. It is interesting to note that it retains 134.28 % of initial areal capacitance after 5000 cycles.

Developing 3D printable waste paper based biocomposites is a potentially greener alternative to traditional waste paper recycling methods. In this paper, waste office paper (WOP) filled polylactide acid (PLA) biocomposites were prepared as filaments for Fused Filament Fabrication (FFF). The morphology, rheology, thermal properties, and physical properties of PLA-WOP composites were investigated. Results revealed that the addition of WOP improved the composites’ melt flow abilities. The Tg and Tm of composites remained similar to the neat PLA. However, tensile strengths of the prints decreased with the increase of WOP content, which could be attributed to the heterogeneous dispersion and aggregation caused by the abundance of WOP in the system. When 5% WOP was used, the elongation at break increased in comparison with pure PLA specimens. Nonetheless, when the WOP content was increased to 15%, the elongation at break decreased. To improve the mechanical properties of the prints, a silane coupling agent (γ-methacryloxypropyltrimethoxylsilane, KH570) was used to modify WOP granules. The mechanical properties were clearly enhanced post KH570 treatment. Furthermore, FTIR analyses demonstrated that the hydrogen bonding improved interfacial adhesion between WOP fillers and the PLA matrix. Thermal decomposition showed that the PLA-WOP composites had virtually no degradation below 260 °C, indicating that the composite filaments are safe for indoor 3D printing.

Flexible all-solid-state supercapacitors (FASSCs) have attracted much attention as power supplies for portable and wearable electronic products. Herein, we report the fabrication of a foldable, extra lightweight, flexible chopped carbon fiber paper (CFP) with a porous network structure prepared via wet-mold papermaking that can serve as a conductive substrate. The conductivity and pseudocapacitance of the electrode were improved by controlling the growth of 3D Cu(OH)2 nanorod arrays on CFP substrate. The Cu(OH)2@CFP electrode has a high specific capacitance of 421.8 mF cm−2 at a current density of 0.5 mA cm−2 with capacitance retention of 82.98% at a current density of 10 mA cm−2 after 5000 charge-discharge cycles. The FASSC manifested not only a large capacitance of 196.1 mF cm−2 at 2 mA cm−2, as well as energy and power densities of 6.97 × 10−2 mWh cm−2 and 1.6 mW cm−2, respectively, but also excellent stability of 80.3% over 5000 cycles at 5 mA cm−2. In addition, we confirmed that the FASSC has a large bending angle and can be twisted into various shapes, thereby indicating its applicability in portable and wearable electronic devices.

Lithium metal is the most attractive and promising anode for next-generation high energy batteries. However, uncontrollable dendrite growth of lithium remains a detrimental safety challenge. To tackle this problem, a 3D flexible MXene@Au host is designed by depositing an ultra-fine and robust Au layer on MXene paper via ion-sputtering. The Au layer acts as lithiophilic nuclear agent to ensure homogeneous lithium deposition and suppress the lithium dendrites growth. The as-prepared flexible 3D MXene@Au@Li anode shows significantly enhanced performance. Full lithium metal cell with LFP cathode delivers high capacity retention of 98.47% even after 200 cycles with good rate capability. These results may be useful for other metallic battery system and has potential applications in sensors, super-capacitor and catalyst etc.

Fabricating low-cost and high-efficiency oil-water separation superwetting materials for the demand of oil spilling treatment remains a great challenge. Herein, a superwetting aluminosilicate fiber paper decorated by flower-like nickel-cobalt carbonate hydroxide (NiCo-CH) nanostructures was prepared via the hydrothermal method and chemical modification with stearic acid (SA) or 1H, 1H, 2H, 2H-Perfluoroalkyltriethoxysilane (FAS-17). The superhydrophilic multi-layers nanoflowers combing with nanoflakes were uniformly distributed on the surface of aluminosilicate fiber. The superhydrophilic aluminosilicate fiber was then modified by the SA to obtain the superhydrophobic aluminosilicate fiber (SA-NiCo-CH@Al2SiO5 FP). The SA-NiCo-CH@Al2SiO5 FP revealed high separation efficiency (> 95.4%) for both light oils and heavy oils, and high oil flux (417 L m−2 h−1–71,656 L m−2 h−1). Furthermore, the SA-NiCo-CH@Al2SiO5 FP can also remain superhydrophobicity under various harsh conditions, such as dust, sand impact, acid or alkali, and low-temperature environments. This study revealed an inexpensive and simple-fabricated multifunctional superwetting material, which provides promising avenue for future applications in oil-water separation.

Novel sensors based on fluorescent carbon dots were developed for a rapid, selective, and sensitive detection of pyrimethanil, a fungicide widely used in many agricultural crops. The carbon dots were synthesized from maleic anhydride and triethylenetetramine via a facile one-pot pyrolysis. A quenched fluorescence intensity of carbon dots in the presence of pyrimethanil occurred via inner filter effect and strong π-π interaction. The carbon dots were sensitive to pyrimethanil across a linear range from 0.5 to 75 µM with a low detection limit of 14 nM. The sensing results could be generated in 30 s. The fluorescent carbon dots showed excellent stability and selectivity to pyrimethanil in the presence of interferences, including fungicides and metal ions. They were also successfully employed for pyrimethanil detection in apples, cucumbers, and drinking water, yielding 98.6–107.1% recovery. The practical, portable, and reusable paper-based sensor was also developed. The cytotoxicity of carbon dots was tested to demonstrate that they are sufficiently safe to use. The novel pyrimethanil sensor based on fluorescent carbon dots developed in this work can be used as a high-performance sensor and a rapid tool for quality control in food, agricultural, and environmental monitoring.

The authors of the title paper (Optics and Laser Technology 107 (2018) 478–483) report to have grown a so-called ‘ l- Lysine doped oxalic acid’ crystal by slow evaporation of an aqueous solution containing l- lysine and oxalic acid in 1:2 mol ratio. In this letter to the Editor, we prove that the ‘ l- lysine doped oxalic acid’ is a dubious crystal.

Lignin, the second most plentiful biopolymer, is produced on a large scale as the waste of the pulp and paper industries. Conventionally, lignin is incinerated for energy generation, while less tha...

The development of the preparation strategy for high-quality and large-size graphene via eco-friendly routes is still a challenging issue. Herein, we have successfully developed a novel route to chemically exfoliate natural graphite into high-quality and large-size graphene in a binary-peroxidant system. This system is composed of urea peroxide (CO(NH2)2⋅H2O2) and hydrogen peroxide (H2O2), where CO(NH2)2⋅H2O2 is used in preparing graphene for the first time. Benefiting from the complete decomposition of CO(NH2)2⋅H2O2 and H2O2 into gaseous species under microwave (MW) irradiation, no water-washing and effluent-treatment are needed in this chemical exfoliation procedure, thus the preparation of graphene in an eco-friendly way is realized. The resultant graphene behaves a large-size, high-quality and few-layer feature with a yield of ~100%. Then 4 μm-thick ultrathin graphene paper fabricated from the as-exfoliated graphene is used as an electromagnetic interference (EMI) shielding material. And its absolute effectiveness of EMI shielding (SSE/t) is up to 34,176.9 dB cm2 g −1, which is, to the best of our knowledge, among the highest values so far reported for typical EMI shielding materials. The EMI shielding performance demonstrates a great application potential of graphene paper in meeting the ever-increasingly EMI shielding demands in miniaturized electronic devices.

Iron gall Inks corrosion causes paper degradation (browning, embrittlement) and treatments were developed to tackle this issue. They often include resizing with gelatin to reinforce the paper and its cellulosic fibers (of diameter approx. 10 µm). This work aimed at measuring the distribution of ink components at the scale of individual paper fibers so as to give a better understanding of the impact of gelatin (re-)sizing on iron gall ink corrosion. For this purpose, scanning transmission X-ray microscopy (STXM) was used at the Canadian light source synchrotron (CLS, Saskatoon). This technique combines nano-scale mapping (resolution of 30 nm) and near edge X-ray absorption fine structure (NEXAFS) analysis. Fe L-edge measurements enabled to map iron distribution and to locate iron(II) and iron(III) rich areas. N K-edge measurement made it possible to map gelatin distribution. C K-edge measurements allowed mapping and discrimination of cellulose, gallic acid, iron gall ink precipitate and gelatin. Three fibers were studied: an inked fiber with no size, a sized fiber that was afterwards inked and an inked fiber sprayed with gelatin. Analysis of gelatin and ink ingredients distribution indicated a lower amount of iron inside the treated cellulosic fiber, which may explain the beneficial effect of gelatin on iron gall ink corrosion.

As an aromatic polymer in nature, lignin has recently attracted gross attention because of its advantages of high carbon content, low cost and bio-renewability. However, most lignin is directly burnt for power generation to satisfy the energy demand of the pulp mills. As a result, only a handful of isolated lignin is used as a raw material. Thus, increasing value addition on lignin to expand its scope of applications is currently a challenge demanding immediate attention. Many efforts have been made in the valorization of lignin, including the preparation of precursors for carbon fibers. However, its complex structure and diversity significantly restrict the spinnability of lignin. In this review, we provide elaborate knowledge on the preparation of lignin-based carbon fibers ranging from the relationships among chemical structures, formation conditions and properties of fibers, to their potential applications. Specifically, control procedures for different spinning methods of lignin, including melt spinning, solution spinning and electrospinning, together with stabilization and carbonization are deeply discussed to provide an overall understanding towards the formation of lignin-based carbon fibers. We also offer perspectives on the challenges and new directions for future development of lignin-based carbon fibers.

Graphical abstract, Introduction Face masks are regarded as effective Personal Protective Equipment (PPE) during the COVID-19 pandemic. However, the dominant polypropylene (PP)-based masks are devoid of antiviral/antibacterial activities and create enormous environmental burdens after disposal. Objectives Here we report a facile and potentially scalable method to fabricate biodegradable, breathable, and biocidal cellulose nonwovens (BCNWs) to address both environmental and hygienic problems of commercially available face masks. Methods TEMPO-oxidized cellulose nonwovens are rendered antiviral/antibacterial via covalent bonding with disinfecting polyhexamethylene guanidine or neomycin sulfate through carbodiimide coupling chemistry. Results The obtained results showed that the BCNWs have virucidal rate of >99.14%, bactericidal efficiency of >99.51%, no leaching-out effect, and excellent air permeability of >1111.5 mm s−1. More importantly, the as-prepared BCNWs can inactivate SARS-CoV-2 instantly. Conclusions This strategy provides a new platform for the green fabrication of multifunctional cellulose nonwovens as scalable bio-protective layers with superior performance for various PPE in fighting COVID-19 or future pandemics. Additionally, replacing the non-biodegradable non-antimicrobial PP-based masks with the cellulose-based masks can reduce the plastic wastes and lower the greenhouse gas production from the incineration of disposed masks.

Embargado hasta 30/11/2023 Lithium–sulfur batteries have been recognised as highly promising next-generation batteries, due to their low cost and high theoretical energy density. Despite numerous advances in this technology over the last decade, its commercialisation is still a challenge that has not yet been achieved. Many efforts have been made to improve the problems that these batteries present, mainly by investigating different cathode manufacturing strategies, testing novel Li anodes, new additives in the electrolytes, and modified separators or interlayers. However, the characteristics of the current collectors used in the preparation of the electrodes have been rarely addressed. Three commercial collectors are commonly used in basic research on Li–S batteries: Al foil, carbon coated Al foil (Al-C), and carbon paper (gas diffusion layer, GDL). In this work, a detailed study of the electrochemical response of these commercial collectors has been carried out. The tests were carried out on two S composites formed by carbons of a different natures, commercial carbon black and synthetic N-doped graphene. In addition, the S impregnation method was different, using either melt diffusion at 155 °C or ethylenediamine as S solvent, respectively. In both systems, the results were similar – the electrodes supported on GDL delivered higher specific capacities than those supported on Al and Al-C, with minimal differences between the two. Of the different collector properties examined to explain this behaviour, namely Al corrosion, electrical conductivities, surface-level composition, and surface texture, only the latter had a significant effect in the performance of GDL-based electrodes. SEM images revealed a rough and cracked surface formed by the agglomerated carbon particles that give rise to a complex pore system, predominantly consisting of macropores. All of these features are beneficial for a better anchoring of the active material on the collector surface, in addition to enhancing the wettability of the electrolyte and favouring reaction kinetics. In contrast, the Al-based collector possesses a very smooth and non-porous surface, detrimental to both the active material-substrate interface and the active material impregnation by the electrolyte.

In order to investigate the effect of washing water pH on textile damage for delicate garments, the study was conducted such that a customer survey was first applied to randomly selected users to analyze domestic washing machine using habits of Turkish consumers. Based on the findings of the survey, the experimental study was designed in two successive phases to investigate the dimensional and mechanical behavior of certain types of delicate textiles against varying washing conditions by taking in particular, water properties, namely pH, hardness, and temperature into account, and accordingly to determine the optimized washing conditions for such textiles. Firstly, tergotometer was employed as a washing machine simulator. Within the light of the results obtained, the experimental work of the second phase of the study was conducted, which involved a domestic washing machine as a real-life scenario. All of the results, including the correlation between the data sets obtained from the tergotometer and domestic washing machine trials, were statistically analyzed using Minitab 17. The study produced some important findings regarding the effect of washing water pH on delicate textiles, in addition to an algorithm for improving the present washing program, minimizing textile damage for mainly wool and silk garments.

Flexible thermoelectric materials are presented with potential applications in electronic devices and energy conversion due to their convenient preparation, good flexibility, and various forms. However, as ductility is rarely observed in inorganic semiconductors and ceramic insulators, reports on applications of inorganic oxide materials in flexible thermoelectric materials are sparse. Here, we report a new method for the synthesis of a flexible Na1.4Co2O4 thermoelectric material based on Na1.4Co2O4 bulk materials, which are prepared by a self-flux method and painted on print paper. Seebeck coefficient and power factor of the obtained thermoelectric material are 78–102 μVK-1 and 159–223 μWm-1K-2, respectively, in a temperature range of 303–522 K, which are superior to those values of other conductive polymers and their compounds. More interestingly, the n-type Na1.4Co2O4 flexible material is obtained in the painting process at higher pressure with Seebeck coefficients of –109 to –183 μVK-1 in a temperature range of 303–522 K. The convenient preparation method of these novel flexible thermoelectric materials may be expanded to the synthesis of other flexible thermoelectric materials, which will be the focus of future work.

Palm oil clinker (POC) is a by-product produced by the palm oil industry dumped in open sites, contributing to the environment's issues. Thus the need for strategic ways to mitigate its environmental effect and improves sustainability is crucial. This research was conducted to ascertain the suitability of using the palm oil clinker fine (POCF) as bitumen modifiers through material characterization tests. Furthermore, the evaluation of the influence of modification mixing parameters on the conventional properties of the POCF-modified bitumen. The incorporation of The POCF into the bitumen was done using a high shear mixer with the mixing speed, temperature, and time varied between 500 and 2000 rpm, 140–160 °C, and 30–60 min respectively, whereas the dosage of POCF was varied between (2–10% by weight of bitumen). Subsequently, the effect of the mixing parameters on penetration and softening point tests were used to assess the POCF-modified bitumen conventional properties relating to the base bitumen. From the material characterization, its pozzolanic properties suggest the feasibility of utilizing it as a bitumen modifier. Also, the findings reveal that all the mixing parameters have an influence on the POCF-MB properties and the optimum mixing parameters are 900 rpm at 160 °C for 30 min. While 6.3% of POCF is the optimum dosage that displays more improvement in the conventional properties of the bitumen such as decreasing penetration, increasing softening point. Generally, the incorporation of POCF enhances conventional bitumen properties while concurrently encouraging and harnessing sustainability.

The huge packaging application of non-degradable plastics has created a severe threat to the present civilization. This work emphasizes on low density polyethylene/corn starch biopolymer sheets production. Biodegradability assessment was done under alkali, acid, compost pit soil, garden soil and vegetable waste environment for one year. Enhancement in starch content by 60% in the matrix improved the Young’s modulus and stiffness from 251.79−422.42 MPa and 17763.34–27481.87 N/m respectively. Highest increase in weight loss percent from 1.26% for virgin LDPE to 13.18% for the sample LC5 (LDPE-16 g, Starch-24 g) was observed in garden soil. The degradation was also reported by morphological non-uniformness (SEM images) and drop in mechanical properties like tensile strength from 7.9 to 2.12 MPa in vegetable waste environment. Increase in haze from 97.20 to 99.8% and decrease in transmittance from 68.40 to 28.20% in vegetable waste for sample LC5 confirmed the optical degradability of the sheets.

Various detrimental effects of petroleum-based lubricants have encouraged the use of vegetable oil as a replacement due to its better lubricity and environmental friendliness. This study evaluated the performance of virgin and emulsified vegetable oil as cutting fluid for the turning of titanium alloy with ceramic inserts. The performance was determined using signal to noise (S/N) ratio with few input parameters such as lubricant type, cutting speed, feed rate, and depth of cut. Palm oil and coconut oil were used as the vegetable oil. The virgin oil was mixed with a portion of water to produce emulsified oil. The machining operation applied minimum quantity lubrication (MQL) throughout the experiment. The performance of each type of oil was evaluated in terms of S/N ratio for cutting temperature, and chip reduction coefficient, and percentage of cutting tool wear in order to obtain the best cutting condition. Results showed that the virgin palm oil had better performance on the cutting temperature, tool wear, and chip reduction coefficient. Furthermore, the virgin coconut produced better performance compared to emulsified coconut oil. Hence, it is concluded that virgin vegetable oils perform better as cutting fluid compared to emulsified vegetable oil.

The objective of current numerical analysis is to assess the compression ignition engine performance and emission indices using diesel (B0), spirulina microalgae biodiesel (SMB) blends (SMB20, SMB40, and SMB60) as fuel. The engine chosen for the experimental evaluation and tool validation is 4-stroke solo cylinder of direct injection type diesel engine cooled with water. The numerical assessment is conducted with advanced timing (23.5˚b TDC) of injection and nozzle opening pressure (NOP) 220 bar with half and 100% load condition. The results obtained have shown that SMB20 (20% of spirulina microalgae biodiesel and 80% base fuel) similar results to base fuel (diesel fuel). All spirulina microalgae biodiesel blends reduce brake torque (BT) by 5.7%, indicated efficiency by 0.52% and mechanical efficiency 5.5% at load full condition. Engine exhaust emission results showed that mixed fuel diminishes the oxides of nitrogen (NOX) emission by 4.96% and smoke emission by 11.0% and enhance specific carbon dioxide (CO2) by 3.4% for SMB20 blend at full load condition. The rate of formation of soot (1/deg.) was obtained to be 1.46 for DF, SMB20 by 1.23 and SMB100 by 0.92.

Developing new energy sources is of critical significance to satisfy the growing energy demand and also reduce the emissions of carbon dioxide (CO2) gas. The conversion of CO2 into value-added prod...

Thermal oxidation of carbon electrodes is a common approach to improving flow battery performance. Here, we investigate how thermal pretreatment increases electrode surface area and the effect this...

Small-angle neutron scattering (SANS) is performed to analyse the microstructural state of a reference CuCrZr material with carefully controlled heat treatments, small-scale manufacturing mock-ups of assemblies and high-heat-flux-exposed mock-ups. The work demonstrates that SANS can be used for millimetre-scale analysis of small engineering components with minimal surface preparation., Small-angle neutron scattering (SANS) is performed to analyse the microstructural state of a reference CuCrZr material with carefully controlled heat treatments, small-scale manufacturing mock-ups of assemblies and high-heat-flux-exposed mock-ups for fusion reactor components. The information derived from the SANS data corresponds well to existing literature data based on microscopic-scale techniques, but is obtained at millimetre scale with minimal surface preparation. The manufacturing method and high-heat-flux testing conditions are confirmed to have little impact on the microstructural properties, demonstrating the validity of these treatments for scaled-up reactor components.

A computational method that directly translates the scattering peak information to crystalline domain shapes and orientations is presented. The method is demonstrated at a synchrotron beamline with a standard X-ray scattering setup., Characterization of thin films is of paramount importance for evaluating material processing outcomes/efficiency as well as establishing structure–property/performance relationships. This article introduces grazing-incidence diffraction tomography (GID tomography), a technique that combines grazing-incidence X-ray scattering and computed tomography to quantitatively determine the dimension and orientation of crystalline domains in thin films without restrictions on the beam coherence, substrate type or film thickness. This computational method extends the capability of synchrotron beamlines by utilizing standard X-ray scattering experiment setups.