Search

This paper focuses on the problem of information source identification in online social networks (OSNs). By analyzing the research situation of source identification problems and challenges (such as the randomness of the information dissemination process and complexity of the underlying network topology), this paper studies the problem of multiple source diffusion and proposes a source identification algorithm based on multi-attribute topological clustering (MaTC). The basic idea of the algorithm is to decompose the multi-source problems into a series of single-source problems by using clustering partitioning to improve accuracy and efficiency. Firstly, it estimates the number of source nodes, which is also the number of network partitions, then characterizes the combination of multiple attribute structures as an attribute index of topological clustering, performs an analysis of the distribution of real source nodes in each partition to evaluate the accuracy of the clustering partition, and finally uses Jordan centrality within each partition for single-source identification. Through comparative experiments, it is verified that the proposed MaTC algorithm is superior to the comparison algorithms in evaluating indicators. [ABSTRACT FROM AUTHOR]

For visible and Synthetic Aperture Radar (SAR) image fusion, this paper proposes a visible and SAR image fusion algorithm based on a Transformer and a Convolutional Neural Network (CNN). Firstly, in this paper, the Restormer Block is used to extract cross-modal shallow features. Then, we introduce an improved Transformer–CNN Feature Extractor (TCFE) with a two-branch residual structure. This includes a Transformer branch that introduces the Lite Transformer (LT) and DropKey for extracting global features and a CNN branch that introduces the Convolutional Block Attention Module (CBAM) for extracting local features. Finally, the fused image is output based on global features extracted by the Transformer branch and local features extracted by the CNN branch. The experiments show that the algorithm proposed in this paper can effectively achieve the extraction and fusion of global and local features of visible and SAR images, so that high-quality visible and SAR fusion images can be obtained. [ABSTRACT FROM AUTHOR]

In the process of fabric production, various types of defects affect the quality of a fabric. However, due to the wide variety of fabric defects, the complexity of fabric textures, and the concealment of small target defects, current fabric defect detection algorithms suffer from issues such as having a slow detection speed, low detection accuracy, and a low recognition rate of small target defects. Therefore, developing an efficient and accurate fabric defect detection system has become an urgent problem that needs to be addressed in the textile industry. Addressing the aforementioned issues, this paper proposes an improved YOLOv8n-LAW algorithm based on the YOLOv8n algorithm. First, LSKNet attention mechanisms are added to both ends of the C2f module in the backbone network to provide a broader context area, enhancing the algorithm's feature extraction capability. Next, the PAN-FPN structure of the backbone network is replaced by the AFPN structure, so that the different levels of features of the defects are closer to the semantic information in the progressive fusion. Finally, the CIoU loss is replaced with the WIoU v3 loss, allowing the model to dynamically adjust gradient gains based on the features of fabric defects, effectively focusing on distinguishing between defective and non-defective regions. The experimental results show that the improved YOLOv8n-LAW algorithm achieved an accuracy of 97.4% and a detection speed of 46 frames per second, while effectively increasing the recognition rate of small target defects. [ABSTRACT FROM AUTHOR]

This paper considers the confrontation problem for two tank swarms of equal size and capability in a complex urban scenario. Based on the Unity platform (2022.3.20f1c1), the confrontation scenario is constructed featuring multiple crossing roads. Through the analysis of a substantial amount of biological data and wildlife videos regarding animal behavioral strategies during confrontations for hunting or food competition, two strategies are been utilized to design a novel bio-inspired intelligent swarm confrontation algorithm. The first one is the "fire concentration" strategy, which assigns a target for each tank in a way that the isolated opponent will be preferentially attacked with concentrated firepower. The second one is the "back and forth maneuver" strategy, which makes the tank tactically retreat after firing in order to avoid being hit when the shell is reloading. Two state-of-the-art swarm confrontation algorithms, namely the reinforcement learning algorithm and the assign nearest algorithm, are chosen as the opponents for the bio-inspired swarm confrontation algorithm proposed in this paper. Data of comprehensive confrontation tests show that the bio-inspired swarm confrontation algorithm has significant advantages over its opponents from the aspects of both win rate and efficiency. Moreover, we discuss how vital algorithm parameters would influence the performance indices. [ABSTRACT FROM AUTHOR]

To reduce safety accidents caused by distracted driving and address issues such as low recognition accuracy and deployment difficulties in current algorithms for distracted behavior detection, this paper proposes an algorithm that utilizes an improved KNN for classifying driver posture features to predict distracted driving behavior. Firstly, the number of channels in the Lightweight OpenPose network is pruned to predict and output the coordinates of key points in the upper body of the driver. Secondly, based on the principles of ergonomics, driving behavior features are modeled, and a set of five-dimensional feature values are obtained through geometric calculations. Finally, considering the relationship between the distance between samples and the number of samples, this paper proposes an adjustable distance-weighted KNN algorithm (ADW-KNN), which is used for classification and prediction. The experimental results show that the proposed algorithm achieved a recognition rate of 94.04% for distracted driving behavior on the public dataset SFD3, with a speed of up to 50FPS, superior to mainstream deep learning algorithms in terms of accuracy and speed. The superiority of ADW-KNN was further verified through experiments on other public datasets. [ABSTRACT FROM AUTHOR]

The purpose of the paper is to propose a new implementation of the PID (proportional–integral–derivative) algorithm in digital hardware. The proposed structure is optimized for cost. It follows a serialized, rather than parallel, scheme. It uses only one arithmetic block, performing the multiply-and-add operation. The calculations are carried out in a sequentially cyclic manner. The proposed circuit operates on standard single-precision (32-bit) floating-point numbers. It implements an extended PID formula, containing a non-ideal derivative component, and weighting coefficients, which enable reducing the influence of setpoint changes in the proportional and derivative components. The circuit was implemented in a Cyclone V FPGA (Field-Programmable Gate Array) device from Intel, Santa Clara, CA, USA. The proper operation of the circuit was verified in a simulation. For the specific implementation, which is reported in the paper, the sampling period of 516 ns was obtained, which means that the proposed solution is comparable in terms of speed with other hardware implementations of the PID algorithm operating on single-precision floating-point numbers. However, the presented solution is much more efficient in terms of cost. It uses 1173 LUT (Look-up Table) blocks, 1026 registers, and 1 DSP (Digital Signal Processing) block, i.e., about 30% of logic resources required by comparable solutions. [ABSTRACT FROM AUTHOR]

In recent years, microservices, as an emerging technology in software development, have been favored by developers due to their lightweight and low-coupling features, and have been rapidly applied to the Internet of Things (IoT) and Internet of Vehicles (IoV), etc. Microservices deployed in each unit of the IoV use wireless links to transmit data, which exposes a larger attack surface, and it is precisely because of these features that the secure and efficient placement of microservices in the environment poses a serious challenge. Improving the security of all nodes in an IoV can significantly increase the service provider's operational costs and can create security resource redundancy issues. As the application of reinforcement learning matures, it is enabling faster convergence of algorithms by designing agents, and it performs well in large-scale data environments. Inspired by this, this paper firstly models the placement network and placement behavior abstractly and sets security constraints. The environment information is fully extracted, and an asynchronous reinforcement-learning-based algorithm is designed to improve the effect of microservice placement and reduce the security redundancy based on ensuring the security requirements of microservices. The experimental results show that the algorithm proposed in this paper has good results in terms of the fit of the security index with user requirements and request acceptance rate. [ABSTRACT FROM AUTHOR]

With the advancement of network technology, multimedia videos have emerged as a crucial channel for individuals to access external information, owing to their realistic and intuitive effects. In the presence of high frame rate and high dynamic range videos, the coding efficiency of high-efficiency video coding (HEVC) falls short of meeting the storage and transmission demands of the video content. Therefore, versatile video coding (VVC) introduces a nested quadtree plus multi-type tree (QTMT) segmentation structure based on the HEVC standard, while also expanding the intra-prediction modes from 35 to 67. While the new technology introduced by VVC has enhanced compression performance, it concurrently introduces a higher level of computational complexity. To enhance coding efficiency and diminish computational complexity, this paper explores two key aspects: coding unit (CU) partition decision-making and intra-frame mode selection. Firstly, to address the flexible partitioning structure of QTMT, we propose a decision-tree-based series partitioning decision algorithm for partitioning decisions. Through concatenating the quadtree (QT) partition division decision with the multi-type tree (MT) division decision, a strategy is implemented to determine whether to skip the MT division decision based on texture characteristics. If the MT partition decision is used, four decision tree classifiers are used to judge different partition types. Secondly, for intra-frame mode selection, this paper proposes an ensemble-learning-based algorithm for mode prediction termination. Through the reordering of complete candidate modes and the assessment of prediction accuracy, the termination of redundant candidate modes is accomplished. Experimental results show that compared with the VVC test model (VTM), the algorithm proposed in this paper achieves an average time saving of 54.74%, while the BDBR only increases by 1.61%. [ABSTRACT FROM AUTHOR]

In this paper, a method based on an improved intelligent bat algorithm (IIBA) in cooperation with a voltage and current sensor was applied in maximum power point tracking (MPPT) for a photovoltaic module array (PVMA), where the power generation performance of a PVMA was enhanced. Due to the partial shading of the PVMA from climate changes or the surrounding environment, multiple peak values were generated on the power–voltage (P-V) curve, where the conventional MPPT technology could only track the local maximum power point (LMPP), hence the reduction in output power of PVMAs. Therefore, the IIBA-based MPPT was proposed in this paper to solve such issues and to ensure the capability of a PVMA in tracking the global maximum power point (GMPP) and utilization for enhancing the output power of a PVMA. Firstly, the Matlab/Simulink software was used to establish a boost converter model that simulated the actual 4-series–3-parallel PVMA under different shaded conditions, where the P-V curve with 1-peak, 2-peak, 3-peak and 4-peak values were generated. Subsequently, the tracking paces of the conventional bat algorithm (BA) were adjusted according to the gradient of the P-V curve for a PVMA. At the same time, 0.8 times the maximum power point (MPP) voltage Vmp under standard test conditions (STCs) for a PVMA was set as the initial tracking voltage. Lastly, the simulation results proved that under different environmental impacts, the proposed IIBA led to better performances in tracking both dynamic and steady responses. [ABSTRACT FROM AUTHOR]

This paper studies an LSTM-based adaptive transmission method for a 360-degree video and proposes a non-uniform encoding transmission strategy based on LSTM. Our goal is to maximize the user's video experience by dynamically dividing the 360-degree video into tiles of different numbers and sizes, and selecting different bitrates for each tile. This aims to reduce buffering events and video jitter. To determine the optimal number and size of tiles at the current moment, we constructed a dual-layer stacked LSTM network model. This model predicts, in real-time, the number, size, and bitrate of the tiles needed for the next moment of the 360-degree video based on the distance between the user's eyes and the screen. In our experiments, we used an exhaustive algorithm to calculate the optimal tile division and bitrate selection scheme for a 360-degree video under different network conditions, and used this dataset to train our prediction model. Finally, by comparing with other advanced algorithms, we demonstrated the superiority of our proposed method. [ABSTRACT FROM AUTHOR]

Detecting and recognizing pests are paramount for ensuring the healthy growth of crops, maintaining ecological balance, and enhancing food production. With the advancement of artificial intelligence technologies, traditional pest detection and recognition algorithms based on manually selected pest features have gradually been substituted by deep learning-based algorithms. In this review paper, we first introduce the primary neural network architectures and evaluation metrics in the field of pest detection and pest recognition. Subsequently, we summarize widely used public datasets for pest detection and recognition. Following this, we present various pest detection and recognition algorithms proposed in recent years, providing detailed descriptions of each algorithm and their respective performance metrics. Finally, we outline the challenges that current deep learning-based pest detection and recognition algorithms encounter and propose future research directions for related algorithms. [ABSTRACT FROM AUTHOR]

As blockchain technology advances, cross-chain interoperability has become a crucial requirement for achieving seamless interaction among multiple chains. To solve this problem, this paper proposes a scholarly approach to the development of a cross-chain-secure transmission technique, incorporating the Trusted Platform Module (TPM) and the SM algorithm, which is based on trusted roots. This research paper elaborates on the design and implementation of the cross-chain-secure transmission technique based on TPM and the SM algorithm, emphasizing the academic rigor necessary for addressing the security requirements of cross-chain interactions. The research shows that compared with the previous method, the throughput of production capacity is not significantly different from that before and after adding the network delay, and the success rate of preventing attacks is increased by 46.9% by simulating related attacks. After multiple rounds of experiments, the effectiveness and feasibility of this technology in protecting cross-chain communication data are verified. [ABSTRACT FROM AUTHOR]

The formation of unmanned surface vehicles (USVs) stands as a paramount concern in USV formation control research. In addressing this, this paper introduces a novel formation strategy for USVs, which accounts for their arbitrary initial positions and headings. Firstly, given the random distribution of the USVs' initial positions, to enhance the efficiency of formation assembly, the point set of the USVs is matched with basic formations using the Hausdorff distance to establish the formation. Building upon this foundation and acknowledging the potential hindrance posed by the arbitrary initial headings of the USVs, which could hinder their ability to reach the designated formation target points, a cost matrix is constructed based on the designed distance–azimuth evaluation function. Subsequently, the Hungarian algorithm is utilized to efficiently assign formation target points for the USVs. Ultimately, the effectiveness of the proposed strategy is validated through simulation experiments. [ABSTRACT FROM AUTHOR]

To address the issue of insufficient extraction of target features and the resulting impact on detection performance in long-range infrared aircraft target detection caused by small imaging area and weak radiation intensity starting from the idea of perceiving target context to enhance the features extracted by convolutional neural network, this paper proposes a detecting algorithm based on AWFGLC (adaptive weighted fusion of global–local context). Based on the mechanism of AWFGLC, the input feature map is randomly reorganized and partitioned along the channel dimension, resulting in two feature maps. One feature map is utilized by self-attention for global context modeling, establishing the correlation between target features and background features to highlight the salient features of the target, thereby enabling the detecting algorithm to better perceive the global features of the target. The other feature map is subjected to window partitioning, with max pooling and average pooling performed within each window to highlight the local features of the target. Subsequently, self-attention is applied to the pooled feature map for local context modeling, establishing the correlation between the target and its surrounding neighborhood, further enhancing the weaker parts of the target features, and enabling the detecting algorithm to better perceive the local features of the target. Based on the characteristics of the target, an adaptive weighted fusion strategy with learnable parameters is employed to aggregate the global context and local context feature maps. This results in a feature map containing more complete target information, enhancing the ability of the detection algorithm to distinguish between target and background. Finally, this paper integrates the mechanism of AWFGLC into YOLOv7 for the detection of infrared aircraft targets. The experiments indicate that the proposed algorithm achieves mAP50 scores of 97.8% and 88.7% on self-made and publicly available infrared aircraft datasets, respectively. Moreover, the mAP50:95 scores reach 65.7% and 61.2%, respectively. These results outperform those of classical target detection algorithms, indicating the effective realization of infrared aircraft target detection. [ABSTRACT FROM AUTHOR]

Establishing a national comprehensive PNT (Positioning, Navigation, and Timing) system has become a consensus among major countries worldwide. As a crucial component in completing the entire PNT system, the 5G NR (new radio) time service signal plays a vital role. This paper proposes a 5G NR time service signal that uses a spread spectrum system, shares the 5G signal frequency band, but does not occupy the bandwidth of the 5G communication signal. This timing service signal has relatively low power, making it appear "submerged" within the power of the 5G communication signal. The spread spectrum code for this timing signal employs the chaotic orthogonal composite sequence proposed in this paper. Compared to traditional spread spectrum sequences, this sequence offers better security than m-sequences, improved autocorrelation than Walsh sequences, and an effective suppression of the short-period characteristics exhibited when the Skew Tent-Map chaotic sequence takes special values. This paper simulates the capture of the 5G NR time service signal in an environment with a signal-to-noise ratio of 10 dB using an FFT-based parallel code phase search algorithm, successfully capturing the 5G NR time service signal and verifying the feasibility of the proposed chaotic orthogonal composite sequence as a spread spectrum code. [ABSTRACT FROM AUTHOR]

The rapid development of wireless network technology has led to the coexistence of various heterogeneous wireless networks (HWNs). To ensure that users enjoy normal and diversified services, research on vertical switching technology has become an inevitable trend. However, most current vertical switching algorithms only consider static situations or single services, which are not suitable for power grid scenarios. This paper studies the vertical switching problem of wireless heterogeneous networks for unmanned aerial vehicles (UAVs) performing inspection tasks in power grid scenarios. In this model, a UAV for power grid inspection needs to plan its flight trajectory, avoid obstacles, and find the optimal trajectory to reach each inspection point. Throughout the UAV inspection process, we must ensure the quality of communication services for the UAV. The UAV dynamically selects different networks for access at different locations, presenting a dynamic network selection and vertical switching problem. This paper proposes a method that combines trajectory planning and network selection, which first utilizes the A-star algorithm to obtain suitable trajectories, and then evaluates and judges networks based on the Fuzzy Analytic Hierarchy Process (FAHP) to determine the most appropriate network. It is worth noting that this paper considers three service requirements and seven network attributes under three types of heterogeneous wireless networks. Numerical results show that this method can better meet the requirements of UAV inspection tasks and reduce the number of switches, thus addressing the issue of terminal vertical switches in power grid scenarios. [ABSTRACT FROM AUTHOR]

This paper proposes a fast satellite screening algorithm aimed at the problem of balancing between positioning accuracy and system computing efficiency in a multi-constellation system environment under the Global Navigation Satellite System (GNSS). The algorithm constructs an observation model based on a positioning error for the larger number of satellites under a multi-constellation. The space region is divided based on elevation and azimuth angles to implement the screening algorithm for the solution of the point to be determined. An analysis of the experimental data shows that the average GDOP value of this scheme is 1.835, and the position error of the point to be determined is controlled within 2.5 m when the cut-off altitude angle is 5° and the screening ratio is more than 70%. [ABSTRACT FROM AUTHOR]

This paper proposes a point-by-point weighted fusion algorithm based on an improved random sample consensus (RANSAC) and inverse distance weighting to address the issue of low-resolution point cloud data obtained from light detection and ranging (LiDAR) sensors and single technologies. By fusing low-resolution point clouds with higher-resolution point clouds at the data level, the algorithm generates high-resolution point clouds, achieving the super-resolution reconstruction of lidar point clouds. This method effectively reduces noise in the higher-resolution point clouds while preserving the structure of the low-resolution point clouds, ensuring that the semantic information of the generated high-resolution point clouds remains consistent with that of the low-resolution point clouds. Specifically, the algorithm constructs a K-d tree using the low-resolution point cloud to perform a nearest neighbor search, establishing the correspondence between the low-resolution and higher-resolution point clouds. Next, the improved RANSAC algorithm is employed for point cloud alignment, and inverse distance weighting is used for point-by-point weighted fusion, ultimately yielding the high-resolution point cloud. The experimental results demonstrate that the proposed point cloud super-resolution reconstruction method outperforms other methods across various metrics. Notably, it reduces the Chamfer Distance (CD) metric by 0.49 and 0.29 and improves the Precision metric by 7.75% and 4.47%, respectively, compared to two other methods. [ABSTRACT FROM AUTHOR]

Path planning and obstacle avoidance are fundamental problems in unmanned ground vehicle path planning. Aiming at the limitations of Deep Reinforcement Learning (DRL) algorithms in unmanned ground vehicle path planning, such as low sampling rate, insufficient exploration, and unstable training, this paper proposes an improved algorithm called Dual Priority Experience and Ornstein–Uhlenbeck Soft Actor-Critic (DPEOU-SAC) based on Ornstein–Uhlenbeck (OU noise) and double-factor prioritized sampling experience replay (DPE) with the introduction of expert experience, which is used to help the agent achieve faster and better path planning and obstacle avoidance. Firstly, OU noise enhances the agent's action selection quality through temporal correlation, thereby improving the agent's detection performance in complex unknown environments. Meanwhile, the experience replay is based on double-factor preferential sampling, which has better sample continuity and sample utilization. Then, the introduced expert experience can help the agent to find the optimal path with faster training speed and avoid falling into a local optimum, thus achieving stable training. Finally, the proposed DPEOU-SAC algorithm is tested against other deep reinforcement learning algorithms in four different simulation environments. The experimental results show that the convergence speed of DPEOU-SAC is 88.99% higher than the traditional SAC algorithm, and the shortest path length of DPEOU-SAC is 27.24, which is shorter than that of SAC. [ABSTRACT FROM AUTHOR]

The advancement of information technology has led to the widespread application of remote measurement systems, where information in the form of images or videos, serving as measurement results, is transmitted over networks. However, this transmission is highly susceptible to attacks, tampering, and disputes, posing significant risks to the trustworthy transmission of measurement results from instruments and devices. In recent years, many encryption algorithms proposed for images have focused on encrypting the entire image, resulting in resource waste. Additionally, most encryption algorithms are designed only for single-object-type images. Addressing these issues, this paper proposes a multi-object region encryption algorithm based on an adaptive mechanism. Firstly, an adaptive mechanism is employed to determine the strategy for adjusting the sampling rate of encryption objects, achieved through an encryption resource allocation algorithm. Secondly, an improved polygon segmentation algorithm is utilized to separate single-object regions from multi-object images, dynamically adjusting the sequence of encryption objects based on the adaptive mechanism. Finally, encryption is achieved using a chaos fusion XOR encryption algorithm. Experimental validation using instrument images demonstrates that the proposed algorithm offers high efficiency and security advantages compared to other mainstream image encryption algorithms. [ABSTRACT FROM AUTHOR]

Underwater acoustic channels often have to face the interference of impulsive noise, which is usually modeled by α-stable distribution in simulation experiments. To solve the problem of underwater acoustic channel estimation under impulsive noise, this paper proposes a convex combination–variable-step-size least mean p-norm algorithm. The algorithm incorporates a convex combination into the variable-step-size least mean p-norm algorithm and uses the convex combination of different convergence domains provided by changing the parameters of the Gaussian function to further improve the effect after convergence. The simulation results of channel estimation show that the convex combination–variable-step-size least mean p-norm algorithm provides a more stable, robust, and universal solution than the variable-step-size least mean p-norm algorithm. [ABSTRACT FROM AUTHOR]

In this paper, we propose a Grid-based Non-uniform Probability Density Sampling Probabilistic Roadmap algorithm (GN-PRM) in response to the challenges of difficult sampling in narrow passages and low-probability map generation in traditional Probabilistic Roadmap algorithms (PRM). The improved algorithm incorporates grid-based processing for map segmentation, employing non-uniform probability density sampling based on the different attributes of each block to enhance sampling probability in narrow passages. Additionally, considering the computational cost and frequent ineffective searches in traditional PRM algorithms during pathfinding, this paper optimizes the time required for query route planning by altering connection strategies to improve the algorithm's runtime. Finally, the simulation results indicate that, with a reduction of over 50% in undirected line segments and a reduction of over 85% in runtime, the GN-PRM algorithm achieves a 100% success rate in complex planning scenarios with a sampling point value of K = 500. In comparison, the traditional PRM algorithm has a success rate of no more than 10%, with a sampling point value of K = 500. [ABSTRACT FROM AUTHOR]

This paper presents a low-latency coordinate rotation digital computer (CORDIC) algorithm to accelerate the computation of arctangent functions, and it describes the corresponding iterative and pipelined architecture of this novel algorithm. As compared to the existing methods based on CORDIC, the proposed method can effectively reduce the number of iterations by dedicated pre-rotation and comparison processes. Moreover, the proposed CORDIC algorithm supports all vectors with arbitrary angles while maintaining convergence. By error analysis, the proposed algorithm can achieve the same accuracy as the conventional CORDIC algorithm during floating-point arctangent function computation and reduce the number of iterations by approximately 50%. This paper presents two new architectures—the iterative architecture, which can be more resource efficient, and the pipelined architecture, which can achieve a throughput rate of one datum per clock. Finally, the experimental comparison results indicate that the proposed method outperforms extant methods as it exhibits low latency, requires fewer resources to compute the arctangent function for floating-point inputs, and necessitates no digital signal processing (DSP) and memory for fixed-point inputs. [ABSTRACT FROM AUTHOR]

In everyday life, 5G-based localization technology is commonly used, but non-line-of-sight (NLOS) environments can block the propagation of the localization signal, thus preventing localization. In order to solve this problem, this paper proposes a reconfigurable intelligent surface non-line-of-sight time difference of arrival (TDOA) localization (RNTL) algorithm. Firstly, a model of a reflective-surface-based intelligent localization (RBP) system is constructed, which utilizes multiple RISs deployed in the air to reflect signals. Secondly, in order to reduce the localization error, this paper establishes the optimization problem of minimizing the distance between each estimated coordinate and the actual coordinate and solves it via the piecewise linear chaotic map–gray wolf optimization algorithm (PWLCM-GWO). Finally, the simulation results show that the RNTL algorithm significantly outperforms the traditional gray wolf optimization and particle swarm optimization algorithms in different signal-to-noise ratios, and the localization errors are reduced by 46% and 53.5%, respectively. [ABSTRACT FROM AUTHOR]

With the rapid development of wireless communication technology, positioning technology, and modern smart devices, Internet of Vehicles (IoVs) smart vehicles have brought great convenience to human production and life. Meanwhile, privacy and security issues are becoming extremely serious, with serious consequences if sensitive data such as vehicle location and trip patterns are leaked. This paper focuses on the demands for vehicular network security, especially privacy protection and existing privacy-protection techniques, including common cryptography methods and cryptography-based advanced technologies. At the same time, this paper also analyzes the advantages and challenges of these technologies in protecting privacy and network security in the Internet of Vehicles, such as the challenges of computational resource requirements and security efficiency in the implementation process, as well as the complexity of realizing effective privacy protection in the interactions among different entities. Finally, this paper envisions the development of privacy-preserving application scenarios and the prospects for crypotography-based privacy-preserving technologies. [ABSTRACT FROM AUTHOR]

This paper focuses on converting complex 3D maps created by LiDAR and SLAM technology into simple 2D maps to make them easier to understand. While 3D maps provide a lot of useful details for robots and computer programs, they can be difficult to read for humans who are used to flat maps. We developed a new system to clean up these 3D maps and convert them into intuitive and accurate 2D maps. The system uses three steps designed to correct different kinds of errors found in 3D LiDAR scan data: clustering-based denoising, height-based denoising, and Statistical Outlier Removal. In particular, height-based denoising is the method we propose in this paper, an algorithm that leaves only indoor structures such as walls. The paper proposes an algorithm that considers the entire range of the point cloud, rather than just the points near the ceiling, as is the case with existing methods, to make denoising more effective. This makes the final 2D map easy to understand and useful for building planning or emergency preparedness. Our main goal is to map the interior of buildings faster and more effectively, creating 2D drawings that reflect accurate and current information. We want to make it easier to use LiDAR and SLAM data in our daily work and increase productivity. [ABSTRACT FROM AUTHOR]

To address the shortcomings of previous autonomous decision models, which often overlook the personalized features of users, this paper proposes a personalized decision control algorithm for autonomous vehicles based on RLHF (reinforcement learning from human feedback). The algorithm combines two reinforcement learning approaches, DDPG (Deep Deterministic Policy Gradient) and PPO (proximal policy optimization), and divides the control scheme into three phases including pre-training, human evaluation, and parameter optimization. During the pre-training phase, an agent is trained using the DDPG algorithm. In the human evaluation phase, different trajectories generated by the DDPG-trained agent are scored by individuals with different styles, and the respective reward models are trained based on the trajectories. In the parameter optimization phase, the network parameters are updated using the PPO algorithm and the reward values given by the reward model to achieve personalized autonomous vehicle control. To validate the control algorithm designed in this paper, a simulation scenario was built using CARLA_0.9.13 software. The results demonstrate that the proposed algorithm can provide personalized decision control solutions for different styles of people, satisfying human needs while ensuring safety. [ABSTRACT FROM AUTHOR]

In view of the problems in planning and recommending tour routes, this paper constructs a feature text mining (FTM) method and spatial accessibility model (SAM) as the key factors for scenic spot recommendation (SSR) and tour route recommendation (TRR). The scenic spot clustering algorithm (SSCA) based on FTM was constructed by tourists' text evaluation data mining. Considering the spatial attributes of scenic spots, the scenic spot topology tree algorithm (SSTTA) based on dynamic buffer spatial accessibility (DBSA) was constructed. The optimal scenic spots were recommended based on interest matching and spatial accessibility optimization. As to the recommended scenic spots, this paper proposes an optimal tour route recommendation algorithm (TRRA) based on SSTTA, which aims to determine the optimal adjacent section path structure tree (ASPST) with the lowest cost under travel constraints and transportation modes. The experiment verifies that the proposed algorithm can recommend scenic spots that match tourists' interests and have optimal spatial accessibility, and the optimal tour routes with the lowest costs under certain travel constraints. Compared with the searched sub-optimal tour routes, the optimal tour route recommended by the proposed algorithm produces the lowest travel costs, and all the scenic spots in the tour route meet the tourists' interests. Compared with the commonly used BDMA and GDMA methods, the proposed algorithm can determine the optimal routes with lower travel costs. [ABSTRACT FROM AUTHOR]

To address the reactive power optimization control problem in offshore wind farms (OWFs), this paper proposes an adaptive reactive power optimization control strategy based on an improved Particle Swarm Optimization (PSO) algorithm. Firstly, an OWF multi-objective optimization control model is established, with the total sum of voltage deviations at wind turbine (WT) terminals, active power network losses, and reactive power margin of WTs as comprehensive optimization objectives. Innovatively, adaptive weighting coefficients are introduced for the three sub-objectives, enabling the weights of each optimization objective to be adaptively adjusted based on real-time operating conditions, thus enhancing the adaptability of the reactive power optimization model to changes in operating conditions. Secondly, a Uniform Adaptive Particle Swarm Optimization (UAPSO) algorithm is proposed. On one hand, the algorithm initializes the particle swarm using a uniform initialization method; on the other hand, it improves the particle velocity update formula, allowing the inertia coefficient to adaptively adjust based on the number of iterations and the fitness ranking of particles. Simulation results demonstrate the following: (1) Under various operating conditions, the proposed adaptive multi-objective reactive power optimization strategy can ensure the stability of node voltages in offshore wind farms, reduce active power losses, and simultaneously improve reactive power margins. (2) Compared with the traditional PSO algorithm, UAPSO exhibits an approximately 10% improvement in solution speed and enhanced solution accuracy. [ABSTRACT FROM AUTHOR]

Fast factorized back-projection (FFBP) is a classical fast time-domain technique that has garnered significant success in spotlight synthetic aperture radar (SAR) signal processing. The algorithm's efficiency has been extended to stripmap SAR through integral aperture determination and full-aperture data block processing while retaining its computational efficiency. However, the above method is only operated in the azimuth direction, and the computing efficiency needs to be urgently improved in the actual processing process. This paper proposes a fast factorized back-projection algorithm for stripmap SAR imaging based on range block division. The echo data are divided into multiple subblocks in the range direction, and FFBP processing is applied separately to each full-aperture subblock, further enhancing computational efficiency. The paper analyzes the algorithm's principles, underscores the necessity of integral aperture determination and full-aperture data block processing, provides specific implementation steps, and applies the algorithm to point target simulation and experimental data from a vehicle-mounted ice radar. The experiments validate the algorithm's efficiency in stripmap SAR imaging. [ABSTRACT FROM AUTHOR]

To address the issue of low accuracy in detecting malicious program behaviors in new power system edge-side applications, we present a detection model based on API call sequences that combines rule matching and deep learning techniques in this paper. We first use the PrefixSpan algorithm to mine frequent API call sequences in different threads of the same program within a malicious program dataset to create a rule base for malicious behavior sequences. The API call sequences to be examined are then matched using the malicious behavior sequence matching model, and those that do not match are fed into the TextCNN deep learning detection model for additional detection. The two models collaborate to accomplish program behavior detection. Experimental results demonstrate that the proposed detection model can effectively identify malicious samples and discern malicious program behaviors. [ABSTRACT FROM AUTHOR]

This paper proposes an all-digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time-Interleaved Analog-to-Digital Converter (TIADC). The output of the reference channel is aligned with each sub-channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub-channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high-speed data acquisition systems. The proposed architecture is applied to a 12-bit 2.4 GS/s four-channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off-chip calibration of a commercial 12-bit four-channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results. [ABSTRACT FROM AUTHOR]

It is well known that the recursive least squares (RLS) algorithm is renowned for its rapid convergence and excellent tracking capability. However, its performance is significantly compromised when the system is sparse or when the input signals are contaminated by impulse noise. Therefore, in this paper, the minimum error entropy (MEE) criterion is introduced into the cost function of the RLS algorithm in this paper, with the aim of counteracting the interference from impulse noise. To address the sparse characteristics of the system, we employ a universally applicable convex function to regularize the cost function. The resulting new algorithm is named the convex regularization recursive minimum error entropy (CR-RMEE) algorithm. Simulation results indicate that the performance of the CR-RMEE algorithm surpasses that of other similar algorithms, and the new algorithm excels not only in scenarios with sparse systems but also demonstrates strong robustness against pulse noise. [ABSTRACT FROM AUTHOR]

With the rapid development of the Internet of Things (IoT), ensuring secure communication between devices has become a crucial challenge. This paper proposes a novel secure communication solution by extracting wireless channel state information (CSI) features from IoT devices to generate a device identity. Due to the instability of the wireless channel, the CSI features are fuzzy and time-varying; thus, we a employ locally sensitive hashing (LSH) algorithm to ensure the stability of the generated identity in a dynamically changing wireless channel environment. Furthermore, zero-knowledge proofs are utilized to guarantee the authenticity and effectiveness of the generated identity. Finally, the identity generated using the aforementioned approach is integrated into an IBE communication scheme, which involves the fuzzy extraction of channel state information from IoT devices, stable identity extraction for fuzzy IoT devices using LSH, and the use of zero-knowledge proofs to ensure the authenticity of the generated identity. This identity is then employed as the identity information in identity-based encryption (IBE), constructing the device's public key for achieving confidential communication between devices. [ABSTRACT FROM AUTHOR]

High-altitude work poses significant safety risks, and wearing safety belts is crucial to prevent falls and ensure worker safety. However, manual monitoring of safety belt usage is time consuming and prone to errors. In this paper, we propose an improved high-altitude safety belt detection algorithm based on the YOLOv8 model to address these challenges. Our paper introduces several improvements to enhance its performance in detecting safety belts. First, to enhance the feature extraction capability, we introduce a BiFormer attention mechanism. Moreover, we used a lightweight upsampling operator instead of the original upsampling layer to better preserve and recover detailed information without adding an excessive computational burden. Meanwhile, Slim-neck was introduced into the neck layer. Additionally, extra auxiliary training heads were incorporated into the head layer to enhance the detection capability. Lastly, to optimize the prediction of bounding box position and size, we replaced the original loss function with MPDIOU. We evaluated our algorithm using a dataset collected from high-altitude work scenarios and demonstrated its effectiveness in detecting safety belts with high accuracy. Compared to the original YOLOv8 model, the improved model achieves P (precision), R (recall), and mAP (mean average precision) values of 98%, 91.4%, and 97.3%, respectively. These values represent an improvement of 5.1%, 0.5%, and 1.2%, respectively, compared to the original model. The proposed algorithm has the potential to improve workplace safety and reduce the risk of accidents in high-altitude work environments. [ABSTRACT FROM AUTHOR]

The problem of multiple DAGs sharing satellite constellation resources has gradually attracted widespread attention. Due to the limited computing resources and energy consumption of satellite networks, it is necessary to formulate a reasonable multi-DAG task scheduling scheme to ensure the fairness of each workflow under the premise of considering latency and energy consumption. Therefore, in this paper, we propose a multi-DAG satellite network task scheduling algorithm based on cache-composite priority under the Software-Defined Networking satellite network architecture. The basic idea of this algorithm lies in the DAG selection phase, where not only are task priorities computed but also the concept of fair scheduling is introduced, so as to prevent the excessively delayed scheduling of low-priority DAG tasks. In addition, the concept of public subtasks is introduced to reduce the system overhead caused by repetitive tasks. The experimental results show that the hybrid scheduling strategy proposed in this paper can meet the demand of DAG scheduling and improve the degree of task completion while effectively reducing the task latency and energy consumption. [ABSTRACT FROM AUTHOR]

Recently, artificial intelligence (AI)-based algorithms have revolutionized the medical image segmentation processes. Thus, the precise segmentation of organs and their lesions may contribute to an efficient diagnostics process and a more effective selection of targeted therapies, as well as increasing the effectiveness of the training process. In this context, AI may contribute to the automatization of the image scan segmentation process and increase the quality of the resulting 3D objects, which may lead to the generation of more realistic virtual objects. In this paper, we focus on the AI-based solutions applied in medical image scan segmentation and intelligent visual content generation, i.e., computer-generated three-dimensional (3D) images in the context of extended reality (XR). We consider different types of neural networks used with a special emphasis on the learning rules applied, taking into account algorithm accuracy and performance, as well as open data availability. This paper attempts to summarize the current development of AI-based segmentation methods in medical imaging and intelligent visual content generation that are applied in XR. It concludes with possible developments and open challenges in AI applications in extended reality-based solutions. Finally, future lines of research and development directions of artificial intelligence applications, both in medical image segmentation and extended reality-based medical solutions, are discussed. [ABSTRACT FROM AUTHOR]

The optimization and allocation of transport cost savings among stakeholders are two important issues that influence the satisfaction of information providers, drivers and passengers in ridesharing recommendation systems. For optimization issues, finding optimal solutions for nonconvex constrained discrete ridesharing optimization problems poses a challenge due to computational complexity. For the allocation of transport cost savings issues, the development of an effective method to allocate cost savings in ridesharing recommendation systems is an urgent need to improve the acceptability of ridesharing. The hybridization of different metaheuristic approaches has demonstrated its advantages in tackling the complexity of optimization problems. The principle of the hybridization of metaheuristic approaches is similar to a marriage of two people with the goal of having a happy ending. However, the effectiveness of hybrid metaheuristic algorithms is unknown a priori and depends on the problem to be solved. This is similar to a situation where no one knows whether a marriage will have a happy ending a priori. Whether the hybridization of the Firefly Algorithm (FA) with Particle Swarm Optimization (PSO) or Differential Evolution (DE) can work effectively in solving ridesharing optimization problems needs further study. Motivated by deficiencies in existing studies, this paper focuses on the effectiveness of hybrid metaheuristic algorithms for solving ridesharing problems based on the hybridization of FA with PSO or the hybridization of FA with DE. Another focus of this paper is to propose and study the effectiveness of a new method to allocate ridesharing cost savings to the stakeholders in ridesharing systems. The developed hybrid metaheuristic algorithms and the allocation method have been compared with examples of several application scenarios to illustrate their effectiveness. The results indicate that hybridizing FA with PSO creates a more efficient algorithm, whereas hybridizing FA with DE does not lead to a more efficient algorithm for the ridesharing recommendation problem. An interesting finding of this study is very similar to what happens in the real world: "Not all marriages have happy endings". [ABSTRACT FROM AUTHOR]

With the development of UAV automatic cruising along power transmission lines, intelligent defect detection in aerial images has become increasingly important. In the process of target detection for aerial photography of transmission lines, insulator defects often pose challenges due to complex backgrounds, resulting in noisy images and issues such as slow detection speed, leakage, and the misidentification of small-sized targets. To address these challenges, this paper proposes an insulator defect detection algorithm called DFCG_YOLOv5, which focuses on improving both the accuracy and speed by enhancing the network structure and optimizing the loss function. Firstly, the input part is optimized, and a High-Speed Adaptive Median Filtering (HSMF) algorithm is introduced to preprocess the images captured by the UAV system, effectively reducing the noise interference in target detection. Secondly, the original Ghost backbone structure is further optimized, and the DFC attention mechanism is incorporated to strike a balance between the target detection accuracy and speed. Additionally, the original CIOU loss function is replaced with the Poly Loss, which addresses the issue of imbalanced positive and negative samples for small targets. By adjusting the parameters for different datasets, this modification effectively suppresses background positive samples and enhances the detection accuracy. To align with real-world engineering applications, the dataset utilized in this study consists of unmanned aircraft system machine patrol images from the Yunnan Power Supply Bureau Company. The experimental results demonstrate a 9.2% improvement in the algorithm accuracy and a 26.2% increase in the inference speed compared to YOLOv5s. These findings hold significant implications for the practical implementation of target detection in engineering scenarios. [ABSTRACT FROM AUTHOR]

Chip contour detection aims to detect damaged chips in chip slots during IC packaging and testing using vision facilities. However, the operation speed of the new chip transportation machine is too fast, and the current chip contour detection models, such as Yolov5, M3-Yolov5, FGHSE-Yolov5, and GSEH-Yolov5, running on the embedded platform, Jetson Nano, cannot detect chip contours in a timely manner. Therefore, there must be a rapid response for chip contour detection. This paper introduces the DSGSE-Yolov5s algorithm, which can accelerate object detection and image recognition to resolve this problem. Additionally, this study makes a performance comparison between the different models. Compared with the traditional model Yolov5, the proposed DSGSE-Yolov5s algorithm can significantly promote the speed of object detection by 132.17% and slightly increase the precision by 0.85%. As a result, the proposed approach can outperform the other methods. [ABSTRACT FROM AUTHOR]

Traditional multi-agent path planning algorithms often lead to path overlap and excessive energy consumption when dealing with cooperative tasks due to the single-agent-single-task configuration. For this reason, the "many-to-one" cooperative planning method has been proposed, which, although improved, still faces challenges in the vast search space for meeting points and unreasonable task handover locations. This paper proposes the Cooperative Dynamic Priority Safe Interval Path Planning with a multi-meeting-point and single-meeting-point solving mode switching (Co- D P S I P P m s ) algorithm to achieve multi-agent path planning with task handovers at multiple or single meeting points. First, the initial priority is set based on the positional relationships among agents within the cooperative group, and the improved Fermat point method is used to locate multiple meeting points quickly. Second, considering that agents must pick up sub-tasks or conduct task handovers midway, a segmented path planning strategy is proposed to ensure that cooperative agents can efficiently and accurately complete task handovers. Finally, an automatic switching strategy between multi-meeting-point and single-meeting-point solving modes is designed to ensure the algorithm's success rate. Tests show that Co- D P S I P P m s outperforms existing algorithms in 1-to-1 and m-to-1 cooperative tasks, demonstrating its efficiency and practicality. [ABSTRACT FROM AUTHOR]

Co-resident attacks are serious security threats in multi-tenant public cloud platforms. They are often implemented by building side channels between virtual machines (VMs) hosted on the same cloud server. Traditional defense methods are troubled by the deployment cost. The existing tenant classification methods can hardly cope with the real dataset that is quite large and extremely unevenly distributed, and may have problems in the processing speed considering the computation complexity of the DBSCAN algorithm. In this paper, we propose a novel co-resident attack defense strategy which solve these problems through an improved and efficient multi-level clustering algorithm and semi-supervised classification method. We propose a novel multi-level clustering algorithm which can efficiently reduce the complexity, since only a few parameter adjustments are required. Built on the proposed clustering algorithm, a semi-supervised classification model is designed. The experimental results of the classification effect and training speed show that our model achieves F-scores of over 85% and is significantly faster than traditional SVM classification methods. Based on the classification of unlabeled tenants into different security groups, the cloud service provider may modify the VM placement policy to achieve physical isolation among different groups, reducing the co-residency probability between attackers and target tenants. Experiments are conducted on a large-scale dataset collected from Azure Cloud Platform. The results show that the proposed model achieves 97.86% accuracy and an average 96.06% F-score, proving the effectiveness and feasibility of the proposed defense strategy. [ABSTRACT FROM AUTHOR]

In the past three decades, stepping-stone intrusion has become a professional and primary way used by intruders to launch their attacks since they can be protected behind a long TCP connection chain. Many different algorithms have been proposed to detect stepping-stone intrusion since 1995. But most algorithms cannot resist intruders' session manipulation. In this paper, we propose a novel approach using the distribution of round-trip time (RTT) of network traffic to detect stepping-stone intrusion. This approach can resist intruders' chaff-perturbation since the round-trip time of network packets can fairly be affected by chaffed packets. The ratio between the standard deviation of the RTTs between Send and Echo packets and the standard deviation of the RTTs between Send and Ack packets can be used to predict if a stepping-stone intrusion exists. The closer to 0 the ratio, the more suspicious a stepping-stone intrusion. [ABSTRACT FROM AUTHOR]

Gesture recognition is crucial in computer vision-based applications, such as drone control, gaming, virtual and augmented reality (VR/AR), and security, especially in human–computer interaction (HCI)-based systems. There are two types of gesture recognition systems, i.e., static and dynamic. However, our focus in this paper is on dynamic gesture recognition. In dynamic hand gesture recognition systems, the sequences of frames, i.e., temporal data, pose significant processing challenges and reduce efficiency compared to static gestures. These data become multi-dimensional compared to static images because spatial and temporal data are being processed, which demands complex deep learning (DL) models with increased computational costs. This article presents a novel triple-layer algorithm that efficiently reduces the 3D feature map into 1D row vectors and enhances the overall performance. First, we process the individual images in a given sequence using the MediaPipe framework and extract the regions of interest (ROI). The processed cropped image is then passed to the Inception-v3 for the 2D feature extractor. Finally, a long short-term memory (LSTM) network is used as a temporal feature extractor and classifier. Our proposed method achieves an average accuracy of more than 89.7%. The experimental results also show that the proposed framework outperforms existing state-of-the-art methods. [ABSTRACT FROM AUTHOR]

One of the core features of 5G networks is the ability to support multiple services on the same infrastructure, with network slicing being a key technology. However, existing network slicing architectures have limitations in efficiently handling slice requests with different requirements, particularly when addressing high-reliability and high-demand services, where many issues remain unresolved. For example, predicting whether actual physical resources can meet network slice request demands and achieving flexible, on-demand resource allocation for different types of slice requests are significant challenges. To address the need for more flexible and efficient service demands, this paper proposes a 5G network slicing deployment algorithm based on the Multi-Agent Deep Deterministic Policy Gradient (MADDPG). Firstly, a new 5G network slicing deployment system framework is established, which measures resources for three typical 5G network slicing scenarios (eMBB, mMTC, uRLLC) and processes different types of slice requests by predicting slice request traffic. Secondly, by adopting the multi-agent approach of MADDPG, the algorithm enhances cooperation between multiple service requests, decentralizes action selection for requests, and schedules resources separately for the three types of slice requests, thereby optimizing resource allocation. Finally, simulation results demonstrate that the proposed algorithm significantly outperforms existing algorithms in terms of resource efficiency and slice request acceptance rate, showcasing the advantages of multi-agent approaches in slice request handling. [ABSTRACT FROM AUTHOR]

This paper presents an optimized quantum circuit for the s c r y p t cryptographic algorithm. We applied various optimization techniques to reduce the DW cost, which is the product of the time and space complexity of quantum circuits. In our proposed method, the number of ancilla qubits was significantly reduced through the use of optimized inverse operations, while the depth was minimized by implementing parallel structures. For the SHA-256, we devised a structure that achieves a substantial reduction in the number of ancilla qubits with only a slight increase in quantum circuit depth. By cleaning the dirty ancilla qubits used in the previous round through inverse operations, we enabled their reuse in each subsequent round. Specifically, we reduced the number of 8128 ancilla qubits, achieving this with an increase of only 6 in the full depth of the quantum circuit. Additionally, within Salsa20/8 in SMix, we reused qubits through inverse operations and performed some operations in parallel to reduce both the number of qubits and the overall quantum circuit depth. Finally, our quantum circuit for s c r y p t demonstrates a significant reduction in the width (the number of qubits) with only a minimal increase in the full quantum circuit depth. [ABSTRACT FROM AUTHOR]

The influence maximization problem is a hot issue in the research on social networks due to its wide application. The problem aims to find a small subset of influential nodes to maximize the influence spread. To tackle the challenge of striking a balance between efficiency and effectiveness in traditional influence maximization algorithms, deep learning-based influence maximization algorithms have been introduced and have achieved advancement. However, these algorithms still encounter two key problems: (1) Traditional deep learning models are not well-equipped to capture the latent topological information of networks with varying sizes and structures. (2) Many deep learning-based methods use the influence spread of individual nodes as labels to train a model, which can result in an overlap of influence among the seed nodes selected by the model. In this paper, we reframe the influence maximization problem as a regression task and introduce an innovative approach to influence maximization. The method adopts an adaptive graph convolution neural network which can explore the latent topology information of the network and can greatly improve the performance of the algorithm. In our approach, firstly, we integrate several network-level attributes and some centrality metrics into a vector as the presentation vector of nodes in the social network. Next, we propose a new label generation method to measure the influence of nodes by neighborhood discount strategy, which takes full account of the influence overlapping problem. Subsequently, labels and presentation vectors are fed into an adaptive graph convolution neural network model. Finally, we use the well-trained model to predict the importance of nodes and select top-K nodes as a seed set. Abundant experiments conducted on various real-world datasets have confirmed that the performance of our proposed algorithm surpasses that of several current state-of-the-art algorithms. [ABSTRACT FROM AUTHOR]

In this paper, we present a novel sparse Bayesian learning (SBL) method for image reconstruction. We integrate the generalized approximate message passing (GAMP) algorithm and Laplacian hierarchical priors (LHP) into a basic SBL model (called LHP-GAMP-SBL) to improve the reconstruction efficiency. In our SBL model, the GAMP structure is used to estimate the mean and variance without matrix inversion in the E-step, while LHP is used to update the hyperparameters in the M-step.The combination of these two structures further deepens the hierarchical structures of the model. The representation ability of the model is enhanced so that the reconstruction accuracy can be improved. Moreover, the introduction of LHP accelerates the convergence of GAMP, which shortens the reconstruction time of the model. Experimental results verify the effectiveness of our method. [ABSTRACT FROM AUTHOR]

In this paper, to obtain antenna arrays with grating lobes suppression capability in wideband and achieve a low peak sidelobe level (PSLL), two non-uniform spiral antenna arrays and an enhanced Harris Hawks optimization (EHHO) algorithm are proposed. By controlling the parameters of the spiral line and sampling equidistant on the spiral line, the sampling points that make up the non-uniform array can be arranged in the plane uniformly and non-uniformly. The simulation results indicate that, because of this special arrangement, the non-uniform arrays obtain the capability of grating lobe suppression in wideband or wide spacing arrangement when compared to the classic uniform array. In addition, to obtain lower PSLL, the Harris Hawks optimization (HHO) algorithm is used for array synthesis because of its diversity of search methods. By employing the step-type taper distribution strategy and the migration strategy, the algorithm's search ability is enhanced, and the simulation results indicate the EHHO algorithm obtains a better solution in terms of the PSLL than other algorithms. A simple patch antenna is designed to build the non-uniform spiral arrays synthesized by the EHHO algorithm. The calculation and simulation results validate the superior performance of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Robust geometric fitting is one of the crucial and fundamental problems in computer vision and pattern recognition. While random sampling and consensus maximization have been popular strategies for robust fitting, finding a balance between optimization quality and computational efficiency remains a persistent obstacle. In this paper, we adopt an optimization perspective and introduce a novel maximum consensus robust fitting algorithm that incorporates the maximum entropy framework into the consensus maximization problem. Specifically, we incorporate the probability distribution of inliers calculated using maximum entropy with consensus constraints. Furthermore, we introduce an improved relaxed and accelerated alternating direction method of multipliers (R-A-ADMMs) strategy tailored to our framework, facilitating an efficient solution to the optimization problem. Our proposed algorithm demonstrates superior performance compared to state-of-the-art methods on both synthetic and contaminated real datasets, particularly when dealing with contaminated datasets containing a high proportion of outliers. [ABSTRACT FROM AUTHOR]