Search

Temperature sensitive Pluronic (Plu) and pH-sensitive polyacrylic acid (PAA) were successfully mixed in different ratios to form in situ gelling formulations for colon cancer therapy. The major formulations were prepared as the liquid and solid suppository dosage forms. Epirubicin (Epi) was chosen as a model anticancer drug. In vitro characterization and in vivo pharmacokinetics and therapeutic efficacy of Epi in six Plu/PAA formulations were evaluated. Our in vitro data indicate that Epi in Plu 14%/PAA 0.75% of both solid and liquid suppositories possess significant cytotoxicity, strong bioadhesive force, long-term appropriate suppository base, sustained release, and high accumulation of Epi in rat rectums. These solid and liquid suppositories were retained in the upper rectum of Sprague-Dawley (SD) rats for at least 12 h. An in vivo pharmacokinetic study using SD rats showed that after rectal administration of solid and liquid suppositories, Epi had greater area under the curve and higher relative bioavailability than in a rectal solution. These solid and liquid suppositories exhibited remarkable inhibition on the tumor growth of CT26 bearing Balb/c mice in vivo. Our findings suggest that in situ thermogelling and mucoadhesive suppositories demonstrate a great potential as colon anticancer delivery systems for protracted release of chemotherapeutic agents.

Temperature sensitive Pluronic (Plu) and pH-sensitive polyacrylic acid (PAA) were successfully mixed in different ratios to form in situ gelling formulations for colon cancer therapy. The major formulations were prepared as the liquid and solid suppository dosage forms. Epirubicin (Epi) was chosen as a model anticancer drug. In vitro characterization and in vivo pharmacokinetics and therapeutic efficacy of Epi in six Plu/PAA formulations were evaluated. Our in vitro data indicate that Epi in Plu 14%/PAA 0.75% of both solid and liquid suppositories possess significant cytotoxicity, strong bioadhesive force, long-term appropriate suppository base, sustained release, and high accumulation of Epi in rat rectums. These solid and liquid suppositories were retained in the upper rectum of Sprague-Dawley (SD) rats for at least 12 h. An in vivo pharmacokinetic study using SD rats showed that after rectal administration of solid and liquid suppositories, Epi had greater area under the curve and higher relative bioavailability than in a rectal solution. These solid and liquid suppositories exhibited remarkable inhibition on the tumor growth of CT26 bearing Balb/c mice in vivo. Our findings suggest that in situ thermogelling and mucoadhesive suppositories demonstrate a great potential as colon anticancer delivery systems for protracted release of chemotherapeutic agents. [ABSTRACT FROM AUTHOR]

Temperature sensitive Pluronic (Plu) and pH-sensitive polyacrylic acid (PAA) were successfully mixed in different ratios to form in situ gelling formulations for colon cancer therapy. The major formulations were prepared as the liquid and solid suppository dosage forms. Epirubicin (Epi) was chosen as a model anticancer drug. In vitro characterization and in vivo pharmacokinetics and therapeutic efficacy of Epi in six Plu/PAA formulations were evaluated. Our in vitro data indicate that Epi in Plu 14%/PAA 0.75% of both solid and liquid suppositories possess significant cytotoxicity, strong bioadhesive force, long-term appropriate suppository base, sustained release, and high accumulation of Epi in rat rectums. These solid and liquid suppositories were retained in the upper rectum of Sprague-Dawley (SD) rats for at least 12 h. An in vivo pharmacokinetic study using SD rats showed that after rectal administration of solid and liquid suppositories, Epi had greater area under the curve and higher relative bioavailability than in a rectal solution. These solid and liquid suppositories exhibited remarkable inhibition on the tumor growth of CT26 bearing Balb/c mice in vivo. Our findings suggest that in situ thermogelling and mucoadhesive suppositories demonstrate a great potential as colon anticancer delivery systems for protracted release of chemotherapeutic agents.

Rectal drug delivery is an effective alternative to oral and parenteral treatments. This route allows for both local and systemic drug therapy. Traditional rectal dosage formulations have historically been used for localised treatments, including laxatives, hemorrhoid therapy and antipyretics. However, this form of drug dosage often feels alien and uncomfortable to a patient, encouraging refusal. The limitations of conventional solid suppositories can be overcome by creating a thermosensitive liquid suppository. Unfortunately, there are currently only a few studies describing their use in therapy. However, recent trends indicate an increase in the development of this modern therapeutic system. This review introduces a novel rectal drug delivery system with the goal of summarising recent developments in thermosensitive liquid suppositories for analgesic, anticancer, antiemetic, antihypertensive, psychiatric, antiallergic, anaesthetic, antimalarial drugs and insulin. The report also presents the impact of various types of components and their concentration on the properties of this rectal dosage form. Further research into such formulations is certainly needed in order to meet the high demand for modern, efficient rectal gelling systems. Continued research and development in this field would undoubtedly further reveal the hidden potential of rectal drug delivery systems.

The objective of this study was to develop a thermosensitive in situ gel based on solid dispersions (SDs) for rectal delivery of ibuprofen (IBU). Thermosensitive (poloxamer 407) and mucoadhesive (hydroxypropylmethyl cellulose E5 and sodium alginate) polymers were used to prepare the in situ gel and the sol-gel transition temperature ( T ) and gel strength were optimized. The in vitro release performance and in vivo pharmacokinetic properties of the in situ gel after their rectal administration to rabbits were investigated. Compared with the solid suppository, the cumulative release of the IBU SDs loaded in situ gel was significantly increased. The in vivo pharmacokinetics indicated that in situ gel had a higher peak plasma concentration ( C ) and area under the curve (AUC) in plasma than the solid suppositories. Histopathology results showed that the IBU in situ gel given at a dose of 15 mg/kg did not produce any irritation. In conclusion, this study suggested that the in situ gel could be an effective rectal formulation for IBU. [ABSTRACT FROM AUTHOR]

Rectal poloxamer gel systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and were mucoadhesive to the rectal tissues without leakage after the dose. However, a poloxamer gel containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a poloxamer gel using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength, and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers, and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the poloxamer gel was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The poloxamer gels with less than 1.0% sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage, and were retained in the rectum of rats for at least 6 hr. Furthermore, poloxamer gel gave significantly higher initial plasma concentrations and faster T[SUBmax] of diclofenac sodium than did solid suppository, indicating that drug from poloxamer gel could be absorbed faster than that from the solid one in rats. Our results suggested that a rectal poloxamer gel system with sodium chloride and poloxamers was a more physically stable, convenient, and effective rectal dosage form for diclofenac sodium. [ABSTRACT FROM AUTHOR]

Liquid suppository systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and mucoadhesive to the rectal tissues without leakage after the dose. However, a liquid suppository containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a liquid suppository system using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the liquid suppository was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The liquid suppositories with less than 1.0% of sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage. Furthermore, liquid suppository gave significantly higher initial plasma concentrations and faster Tmax of diclofenac sodium than did solid suppository, indicating that drug from liquid suppository could be absorbed faster than that from solid one in rats. Our results suggested that a thermosensitive liquid suppository system with sodium chloride and poloxamers was a more physically stable, convenient and effective rectal dosage form for diclofenac sodium. [ABSTRACT FROM AUTHOR]

The rapid growth in the prevalence of infectious diseases requires timely action from drug developers. In recent years, the COVID-19 pandemic has demonstrated the unpreparedness of the population for such emergencies. The introduction of modern methods of Design of Experiments (DoE) is required to accelerate the process of drug development and bring a drug to market. The main objective of this study was to develop an ion-triggered in situ system for intranasal delivery of VLP using a Quality by Design approach. Based on a literature review and initial studies, the key QTPP, CQA, CPP, and CMA were identified to develop a novel delivery system for virus-like particles. As a result of the studies on the quality attributes of the developed delivery system, an ion-triggered in situ gel meeting all the specified parameters was obtained using the Quality by Design method. [ABSTRACT FROM AUTHOR]

Poloxamer solutions prepared with poloxamers and sodium chloride were previously reported to undergo a phase transition to bioadhesive gels at body temperature. For the development of a thermosensitive diclofenac sodium-loaded poloxamer gel, here we investigated the effect of sodium chloride on the release, safety and rectal absorption in rats of diclofenac sodium delivered by the poloxamer gels. P 188 delayed the release rates of diclofenac sodium from poloxamer gels. However, sodium chloride showed no significant effect on the release rates of diclofenac sodium from poloxamer gels. Release mechanism analysis showed the release of diclofenac sodium was proportional to the time. The initial plasma concentrations of diclofenac sodium in the rectal formulation [diclofenac sodium/poloxamer 407 (P 407)/poloxamer 188 (P 188)/sodium chloride (2.5/15/17/0.8%)] were significantly higher compared with those in semi-solid suppository. Furthermore, it gave significantly faster Tmax of diclofenac sodium than did semi-solid suppository, indicating that the diclofenac sodium from poloxamer gel could be absorbed faster than that from semi-solid one in rats. It did not cause any morphological damage to the rectal tissues. These results suggested that poloxamer gel with sodium chloride could be a more effective and safe rectal delivery system of diclofenac sodium. [Copyright &y& Elsevier]

Additive manufacturing (AM) is an emerging pharmaceutical manufacturing technique feasible for patient-centric personalised medicine with tailored pharmacotherapy. Fused filament fabrication (FFF) is a highly emphasised 3D printing technology because it is highly economical and user friendly. However, bridging fused filament fabrication with hot-melt extrusion for filament synthesis is one of the crucial steps involved. This study highlights the feasibility of prototyping a diclofenac sodium-filled enteric hollow compartmental device to avoid gastric irritation associated with the drug. Furthermore, for the first time Kollicoat MAE100P was evaluated for its extrudability in hot-melt and printability during fused filament fabrication. A novel hollow compartmental device was designed with improved sealing conditions, unlike conventional capsules. An optimistic printable filament was extruded using triethyl citrate (TEC) and talc as plasticiser and filler, respectively. The thermal and chemical stabilities of the polymers were confirmed by DSC and FTIR analyses, respectively. The final layer-by-layer printed drug-filled hollow compartmental device was evaluated for its morphology and in vitro enteric release behaviour at pH 6.8, showing a complete release within 4 h with a lag period in an acidic environment of pH 1.2 and the release kinetics fit well with first-order kinetics (R2 > 0.9522). The gastric resistance of the hollow compartmental device was confirmed by in vivo pharmacokinetic assessment, which revealed a 30-min lag phase of the drug release and obtained PK parameters compiles for the delayed release phenomenon. This study revealed the possibility of fabricating a hollow compartmental device with an improved sealing effect using Kollicoat MAE100P by combining FFF with the melt extrusion process. The results showed that the designed hollow compartmental device provided intestinal release, successfully bypassing release in an acidic environment. [ABSTRACT FROM AUTHOR]

Meloxicam (MLX) is one of the most effective NSAIDs, but its poor water solubility and low bioavailability limit its clinical application. In this study, we designed a thermosensitive in situ gel of the hydroxypropyl-β-cyclodextrin inclusion complex (MLX/HP-β-CD-ISG) for rectal delivery to improve bioavailability. The best method for preparing MLX/HP-β-CD was the saturated aqueous solution method. The optimal inclusion prescription was optimized using an orthogonal test, and the inclusion complex was evaluated via PXRD, SEM, FTIR and DSC. Then, MLX/HP-β-CD-ISG was characterized regarding the gel properties, release in vitro, and pharmacokinetics in vivo. The inclusion rate of the inclusion complex obtained via the optimal preparation process was 90.32 ± 3.81%. The above four detection methods show that MLX is completely embedded in the HP-β-CD cavity. The developed MLX/HP-β-CD-ISG formulation has a suitable gelation temperature of 33.40 ± 0.17 °C, a gelation time of 57.33 ± 5.13 s, pH of 7.12 ± 0.05, good gelling ability and meets the requirements of rectal preparations. More importantly, MLX/HP-β-CD-ISG significantly improved the absorption and bioavailability of MLX in rats, prolonging the rectal residence time without causing rectal irritation. This study suggests that the MLX/HP-β-CD-ISG can have a wide application prospect with superior therapeutic benefits. [ABSTRACT FROM AUTHOR]

Pentobarbital is a drug of choice to limit motion in children during paediatric procedural sedations (PPSs). However, despite the rectal route being preferred for infants and children, no pentobarbital suppositories are marketed, and therefore they must be prepared by compounding pharmacies. In this study, two suppository formulations of 30, 40, 50, and 60 mg of pentobarbital sodium were developed using hard-fat Witepsol® W25 either alone (formulation F1) or with oleic acid (formulation F2). The two formulations were subjected to the following tests described in the European Pharmacopoeia: uniformity of dosage units, softening time, resistance to rupture, and disintegration time. The stability of both formulations was also investigated for 41 weeks of storage at 5 ± 3 °C using a stability-indicating liquid chromatography method to quantify pentobarbital sodium and research breakdown product (BP). Although both formulae were compliant to uniformity of dosage, the results were in favour of a faster disintegration of F2 compared to F1 (−63%). On the other hand, F1 was found to be stable after 41 weeks of storage unlike F2 for which several new peaks were detected during the chromatographic analysis, suggesting a shorter stability of only 28 weeks. Both formulae still need to be clinically investigated to confirm their safety and efficiency for PPS. [ABSTRACT FROM AUTHOR]

Thermosensitive liquid suppositories (LSs) carrying the model antihypertensive drug metoprolol tartrate (MT) were developed and evaluated. The fundamental purpose of this work was to produce, for the first time, liquid MT suppositories based on biodegradable nanoparticles and optimize their rheological and mechanical properties for prospective rectal administration. The nanoparticle system was based on a biodegradable copolymer synthesized by ring opening polymerization (ROP) of glycolide (GL) and L,L-lactide (LLA). Biodegradable nanoparticles loaded with the model drug were produced by the o/o method at the first stage of the investigation. Depending on the concentration of the drug in the sample, from 66 to 91% of MT was released over 12 h, according to first-order kinetics. Then, thermosensitive LSs with MT-loaded biodegradable nanoparticles were obtained by a cold method and their mechanical and rheological properties were evaluated. To adjust the thermogelling and mucoadhesive properties for rectal administration, the amounts of major formulation components such as poloxamers (P407, P188), Tween 80, hydroxypropylcellulose (HPC), polyvinylpyrrolidone (PVP), and sodium alginate were optimized. The in vitro release results revealed that more than 80% of the MT was released after 12 h, following also first-order kinetics. It was discovered that the diffusion process was dominant. The drug release profile was mainly governed by the rheological and mechanical properties of the developed formulation. Such a novel, thermosensitive formulation might be an effective alternative to hypertension treatment, particularly for unconscious patients, patients with mental illnesses, geriatric patients, and children. [ABSTRACT FROM AUTHOR]

Recently, hydrogels have been investigated for the controlled release of bioactive molecules, such as for living cell encapsulation and matrices. Due to their remote controllability and quick response, hydrogels are widely used for various applications, including drug delivery. The rate and extent to which the drugs reach their targets are highly dependent on the carriers used in drug delivery systems; therefore the demand for biodegradable and intelligent carriers is progressively increasing. The biodegradable nature of hydrogel has created much interest for its use in drug delivery systems. The first part of this review focuses on emerging fabrication strategies of hydrogel, including physical and chemical cross-linking, as well as radiation cross-linking. The second part describes the applications of hydrogels in various fields, including drug delivery systems. In the end, an overview of the application of hydrogels prepared from several natural polymers in drug delivery is presented. [ABSTRACT FROM AUTHOR]

Abstract: Poloxamer 407 has excellent thermo-sensitive gelling properties. Nevertheless, these gels possess inadequate poor bioadhesiveness and high permeability to water, which limited its’ application as a thermoresponsive matrix. The main aim of the present investigation was to develop thermosensitive and mucoadhesive rectal in situ gel of nimesulide (NM) by using mucoadhesive polymers such as sodium alginate (Alg–Na) and HPMC. These gels were prepared by addition of mucoadhesive polymers (0.5%) to the formulations of thermosensitive gelling solution containing poloxamer 407 (18%) and nimesulide (2.0%). Polyethylene glycol (PEG) was used to modify gelation temperature and drug release properties. The gelation temperature and drug release rate of the prepared in situ gels were evaluated. Gelation temperature was significantly increased with incorporation of nimesulide (2.0%) in the poloxamer solution, while the addition of the mucoadhesive polymers played a reverse role on gelation temperature. The addition of PEG polymers increased the gelation temperature and the drug release rate. Among the formulations examined, the poloxamer 407/nimesulide/sodium alginate/PEG 4000 (18/2.0/0.5/1.2%) exhibited the appropriate gelation temperature, acceptable drug release rate and rectal retention at the administration site. Furthermore, the micrographic results showed that in situ gel, given at the dose of 20mg/kg, was safe for no mucosa irritation. In addition, it resulted in significantly higher initial serum concentrations, C max and AUC of NM compared to the solid suppository. [Copyright &y& Elsevier]

Abstract: To develop a novel clotrimazole-loaded poloxamer-based suppository with enhanced anti-tumor activity and alleviated hepatotoxicity, the melting point of various formulations composed of P 188 and propylene glycol were investigated. The dissolution and anti-tumor activity of clotrimazole delivered by the poloxamer-based suppository was performed. Furthermore, the hepatotoxicity of clotrimazole was carried out after its rectal administration compared to oral administration in mice. The poloxamer mixtures composed of P 188 and propylene glycol were homogeneous phases. P 188 greatly affected the melting point of poloxamer mixtures. In particular, the poloxamer mixture [P 188/propylene glycol (70%/30%)] with the melting point of about 32°C was a solid form at room temperature and instantly melted at physiological temperature. The ratio of P 188/propylene glycol greatly affected the dissolution rates of clotrimazole from poloxamer-based suppository. Dissolution mechanism analysis showed the dissolution rate of clotrimazole from poloxamer-based suppositories was independent of the time. The clotrimazole-loaded suppository with P 188 and propylene glycol could not irritate or damage the rectal tissues of rats and gave the improved anti-tumor activity in a dose-dependent manner at mouse. Furthermore, its rectal administration decreased the hepatotoxicity compared to oral administration. Thus, the poloxamer-based solid suppository system with clotrimazole/P 188/propylene glycol was an effective rectal dosage form for the treatment of tumors with alleviated adverse effects. [Copyright &y& Elsevier]

Abstract: To prepare an ibuprofen-loaded liquid suppository using eutectic mixture with menthol, the effects of menthol and poloxamer 188 (P 188) on the aqueous solubility of ibuprofen were investigated. The physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of ibuprofen, menthol and P 188 were investigated. Then, the pharmacokinetic study of ibuprofen delivered by the liquid suppositories composed of P 188 and menthol were then performed. In the absence of P 188, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts of ibuprofen formed eutectic mixture with six parts of menthol. In the presence of P 188, the solutions with the same ratio showed abrupt increase in the solubility of ibuprofen. Furthermore, the solution with ratio of 4:6 showed more than 2.5- and 6-fold increase in the solubility of ibuprofen compared with that without additives and that without menthol, respectively. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2mg/ml. Ibuprofen increased the gelation temperature and weakened the gel strength and bioadhesive force of liquid suppositories. However, menthol did the opposite due to forming the eutectic mixture with ibuprofen. The ibuprofen-loaded liquid suppository [P 188/menthol/ibuprofen (15/0.25/2.5%)] with the maximum ibuprofen solubility of 1.2mg/ml was administered easily to the anus and to remain at the administered site without leakage after the dose. Furthermore, it gave significantly higher initial plasma concentrations, Cmax and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the liquid suppository system with P 188 and menthol, a more convenient and effective rectal dosage form for ibuprofen will be expected to enhance the rectal bioavailability of ibuprofen. [Copyright &y& Elsevier]

To improve the bioavailability of poorly water-soluble ibuprofen in the rectum with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution and pharmacokinetic study of ibuprofen delivered by the poloxamer gels composed of poloxamer 188 and menthol were then performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts menthol formed eutectic mixture with six parts ibuprofen. In the presence of poloxamer, the solutions with the same ratio of menthol to ibuprofen showed abrupt increase in the solubility of ibuprofen. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2 mg/ml. Menthol improved the dissolution rates of ibuprofen from poloxamer gels. Release mechanism showed that the release rate of ibuprofen from the poloxamer gels without menthol was independent of the time but the drug might be released from the poloxamer gels with menthol by Fickian diffusion. Furthermore, the poloxamer gel with menthol (poloxamer/menthol/ibuprofen (15%/0.25%/2.5%)) gave significantly higher initial plasma concentrations, Cmax and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the poloxamer gel with poloxamer 188 and menthol was a more effective rectal dosage form for ibuprofen. [Copyright &y& Elsevier]

Aim. The study is aimed at developing curcumin suppositories as a promising approach for natural antifungal management of vaginal candidiasis in cervical cancer patients to eradicate side effects produced by current antifungal drugs. The objective of the study was to optimize the suppositories using optimal (custom) design employing Design-Expert 13 software to recognize the concentration of polyethylene glycols (PEG) and Poloxamer 407 and obtain a stable suppository. Methodology. Combinations of PEG 1500 (10%–40%), PEG 6000 (40%–60%), and Poloxamer 407 (5%–30%) were entered as factors, and the responses evaluated were hardness, deformation time, and % drug release. In addition, the formulation was also evaluated for visual examination, weight variation, pH determination, drug content, hardness test, disintegration time, melting zone, deformation time, in vitro drug release, antifungal activity, and stability tests. Results. Suppositories were devoid of holes and cracks, with a characteristic odor and a dark yellowish-orange color. All formulations passed the weight variation test. Formulations exhibited pH ranging from 5.5 to 6.5. Drug content was observed to be 98.65 ± 0.041 % – 99.85 ± 0.041 %. The hardness of the formulation was between 2.9 and 4.2 kg/cm2. The disintegration time ranged from 11 ± 0.052 min to 20 ± 0.011 min. The melting point was between 41 ± 0. 31 ° C and 58 ± 0. 62 ° C. Deformation time ranged from 10 ± 0.45 to 35 ± 0.52 min. Most of the formulations resulted in 90% of drug release at 40 min, and the zone of inhibition noted was 19.6 ± 0.4 mm. All the selected factors have a significant effect on the response chosen for the study. Conclusion. The optimized curcumin vaginal suppository formulation can be an efficient herbal treatment devoid of side effects to treat vaginal candidiasis in cervical cancer patients. [ABSTRACT FROM AUTHOR]

Poloxamer is a commonly used pharmaceutical excipient. It is a high molecular polymer formed using polypropylene oxide and polyethylene oxide units. Specifically, poloxamer 124 is one of the smaller molecular weight in the poloxamer series; however, its pharmacokinetic behaviors in vivo are still unclear. In this study, a method for quantifying poloxamer 124 in rat plasma through ultra‐high‐performance liquid chromatography coupled with quadrupole time of flight mass spectrometry was developed. The intravenous dosage of PL124 was 10 mg/kg. Plasma was collected at different times. The calibration curve was linear in the range of 0.1–5 μg/mL for the poloxamer 124 (r ≥ 0.9956) with the lower limit of quantitation of 0.1 μg/ml. The relative standard deviation of the intraday and interday precisions was below 8.0%, and the relative error of the accuracy was within ±12.0%. The extraction recovery, matrix effect, and stability were satisfactory in rat plasma. The validated method was successfully applied to a pharmacokinetic study of poloxamer 124 in rats. Results indicated that poloxamer 124 could be rapidly absorbed and eliminated through caudal vein injection. This study is helpful for the further study of poloxamer 124. [ABSTRACT FROM AUTHOR]

Although it is a front-line in tuberculosis treatment, rifampicin (RF) exhibits poor oral bioavailability and hepatotoxicity. Rectal mucoadhesive and in situ rectal gels were developed to overcome drug drawbacks. A RF/polyethylene glycol 6000 co-precipitate was first prepared in different ratios. Based on the drug solubility, the selected ratio was investigated for drug/polymer interaction and then incorporated into in situ rectal gels using Pluronic F127 (15%) and Pluronic F68 (10%) as a gel base and mucoadhesive polymers (HPMC, sodium alginate and chitosan). The formulations were assessed for gelation temperature and gel strength. The selected formulation was investigated for in vivo assessments. The results showed that a 1:1 drug/polymer ratio exhibited satisfying solubility with the recorded drug/polymer interaction. Depending on their concentrations, adding mucoadhesive polymers shifted the gelation temperature to lower temperatures and improved the gel strength. The selected formulation (F4) did not exhibit any anal leakage or marked rectal irritation. Using a validated chromatographic analytical method, F4 exhibited higher drug absorption with a 3.38-fold and 1.74-fold higher bioavailability when compared to oral drug suspension and solid suppositories, respectively. Toxicity studies showed unnoticeable hepatic injury in terms of biochemical, histopathological and immunohistochemical examinations. Together, F4 showed a potential of enhanced performance and also offered lower hepatic toxicity, thus offering an encouraging therapeutic alternative. [ABSTRACT FROM AUTHOR]

Dropropizine is a peripheral antitussive drug that acts by inhibiting cough reflex through its action on the peripheral receptors and their afferent conductors. It is marketed in a racemic form or its pure enantiomer called levodropropizine and both are available worldwide in various drug dosage formulations such as tablets, sirup and oral solution. Due to the widespread use of antitussives in the clinic it is necessary to develop efficient analytical methodologies for quality control and also for pharmacokinetic, bioavailability and bioequivalence studies. This review presents a survey of the characteristics, properties and analytical methods used for drug determination, being carried out through scientific articles as well as in official compendia. From the analyzed studies, the majority reports the use of HPLC/UV techniques for drug determination, but also spectrophotometric UV/Vis methods as well as gas chromatography, and voltammetric, potentiometric and conductometric titration methods. In addition, the methodologies addressed the determination of dropropizine or levodropropizine in different types of matrices such as raw material, pharmaceutical formulations, plasma and urine. Despite the extensive clinical use of dropropizine, data from this review evidenced a still limited number of studies dealing with analytical methods for its determination in different matrices, which may be of concern since the applicability of these methods is important for quality assurance, efficacy and safety of the medicine. [ABSTRACT FROM AUTHOR]

The properties of the mixtures of fatty acids obtained by adding different concentrations of cocoa butter (CB) to a pectin matrix (PEC) were studied. The influence of the CB concentration on the optical properties, mechanical properties, barrier properties, surface properties, microstructure and thermal stability of pectin polysaccharide films were determined. The addition of the CB affected the main properties of the films, with the mechanical strength, transparency and water absorption being reduced. The addition of CB led to opaque films with a heterogeneous microstructure, resulting in an increase in the film opacity. The surface hydrophilicity of the PEC films was reduced following the addition of the CB. The degree of the PEC crystallinity increased with the addition of the butter, making the PEC/CB films more thermally stable and shiny. The new materials obtained present great potential to produce edible films or coatings for moisture-sensitive food applications. [ABSTRACT FROM AUTHOR]

The study aimed to investigate the feasibility of incorporation of metoclopramide hydrochloride (MCP HCl) in mucoadhesive thermoreversible liquid suppository (MCP HCl-LS) to bypass the first-pass metabolism and maximize its efficacy to be a promising substitute for parenteral therapy. MCP HCl-LS was formulated using Pluronic (PF127/PF68) and hydroxypropylmethylcellulose (HPMC) and in vitro evaluated through their gelation temperature, gel strength (GS), mucoadhesive force, and in vitro release studies. Also, the MCP HCl-LS was evaluated for its rheological behavior and examined for rectal mucosal integrity after administration. The results revealed that the MCP HCl-LS; composed of PF127/PF68/HPMC (20/7/0.5% w/w) was in the liquid state at room temperature, experienced gelation at 30.23 °C, with suitable GS of 28.66 s and rectal retention force of 43.03 × 102 dyne/cm2. The pharmacokinetic data showed that the MCP HCl-LS exhibited a significant increase (p < 0.05) in AUC0–480 (219.688 vs 172.333 ng.h.mL−1 of the marketed) and 1.3-fold increase in relative bioavailability compared to Primperan® suppository, indicating that LS formula bypassed the first-pass metabolism. Moreover, MCP HCl-LS did not cause any morphological harm to the rectal tissues suggested that the developed formulation was safe and could be a potentially useful alternative drug carrier for rectal delivery of MCP HCl in patients experiencing chemotherapy-induced nausea and vomiting. [ABSTRACT FROM AUTHOR]

Although the oral route is the most convenient route for drug administration, there are a number of circumstances where this is not possible from either a clinical or pharmaceutical perspective. In these cases, the rectal route may represent a practical alternative and can be used to administer drugs for both local and systemic actions. The environment in the rectum is considered relatively constant and stable and has low enzymatic activity in comparison to other sections of the gastrointestinal tract. In addition, drugs can partially bypass the liver following systemic absorption, which reduces the hepatic first-pass effect. Therefore, rectal drug delivery can provide significant local and systemic levels for various drugs, despite the relatively small surface area of the rectal mucosa. Further development and optimization of rectal drug formulations have led to improvements in drug bioavailability, formulation retention, and drug release kinetics. However, despite the pharmaceutical advances in rectal drug delivery, very few of them have translated to the clinical phase. This review will address the physiological and pharmaceutical considerations influencing rectal drug delivery as well as the conventional and novel drug delivery approaches. The translational challenges and development aspects of novel formulations will also be discussed. [ABSTRACT FROM AUTHOR]

Tolmetin sodium (TS) is a nonsteroidal anti-inflammatory drug (NSAID) indicated for treatment of musculoskeletal issues. As other NSAID, TS displays a marked side effects on the gastro-intestinal (GI) tract after oral administration. Traditional solid suppositories can cause pain and discomfort for patients, may reach the end of the colon; consequently, the drug can undergo the first-pass effect. TS liquid suppository (TS-LS) was developed to enhance patient compliance and rectal mucosal safety in high-risk patients receiving highly NSAID therapy. This work was conducted to optimize and evaluate Poloxamer P407/P188-based thermoresponsive TS-LS by using mucoadhesive polymers such as methylcellulose (MC). TS-LS was prepared by cold method and characterized their in vitro physicochemical properties as gelation temperature (GT), gel strength, bioadhesive properties, and in vitro release. The safety of the prepared suppository on rectum, stomach, and liver was evaluated histologically. Pharmacokinetic analyses were performed to compare rectal TS-LS to orally Rhumtol® capsules. The results showed that the optimized TS-LS; composed of P407/P188/MC (21/9/0.5% w/w) displayed gelation at rectum temperature ∼32.90 °C, gel strength of 21.35 s and rectal retention force at the administration site of 24.25 × 102 dyne/cm2. Moreover, TS-LS did not cause any morphological damage to the rectal tissues. Pharmacokinetic parameters of optimized TS-LS formulation revealed 4.6 fold increase in bioavailability as compared to Rhumtol® capsules. Taken together, the results demonstrated that liquid suppository is a potential and physically safe rectal delivery carrier for improvement rectal bioavailability and in vivo safety of TS. [ABSTRACT FROM AUTHOR]

The purpose of this study was to develop and characterize levosulpiride loaded liquid suppository with improved bioavailability. The content of levosulpiride-loaded liquid suppositories were optimized in a series of experiments using various weight ratios of P188, P407, Tween 80, and drug. The suppositories were liquid at room temperature, however, when rectally administered, they became gel at body temperature. Their rheological properties and release characteristics were determined in vitro while pharmacokinetic study was performed after its rectal administration in rats and compared with drug suspension. Poloxamer 188 and Twee 80 decreased the gelation temperature and gelation time, but increased the gel strength and mucoadhesive force of liquid suppositories. Liquid suppository composed of [Levosulpiride/P 188/P 407/Tween 80 (1/15/17/3%)] with a gelation temperature of about 30.7 °C remained liquid at 25 °C, but converted to gel at 30-36.5 °C, resulting in easy administration and rapid gelation inside the body. This liquid suppository gave a considerably increased dissolution rate reflected in a meaningfully higher plasma concentration and 7.1-fold AUC values of levosulpiride in rats as compared to the drug suspension. Hence, liquid suppository system could be used for enhanced bioavailability of levosulpiride-loaded pharmaceutical products. [ABSTRACT FROM AUTHOR]

Drug delivery via the rectum is a useful alternative route of administration to the oral route for patients who cannot swallow. Traditional rectal dosage forms have been historically used for localized treatments including delivery of laxatives, treatment of hemorrhoids and for delivery of antipyretics. However, the recent trend is showing an increase in the development of novel rectal delivery systems to deliver drug directly into the systemic circulation by taking advantage of porto-systemic shunting. The present review is based on research studies carried out between years 1969-2017. Data for this review have been derived from keyword searches using Scopus and Medline databases. Novel rectal drug delivery systems including hollow-type suppositories, thermo-responsive and muco-adhesive liquid suppositories, and nanoparticulate systems incorporated into an appropriate vehicle have offered more control over delivery of drug molecules for local or systemic actions. In addition, various methods for in vitro-in vivo evaluation of rectal drug delivery systems are covered which is as important as the formulation, and must be carried out using appropriate methodology. Continuous research and development in this field of drug delivery may unleash the hidden potential of the rectal drug delivery systems. [ABSTRACT FROM AUTHOR]

To determine the plasma pharmacokinetics of suppository acetaminophen (APAP) in healthy dogs and clinically ill dogs. This prospective study used six healthy client‐owned and 20 clinically ill hospitalized dogs. The healthy dogs were randomized by coin flip to receive APAP orally or as a suppository in crossover study design. Blood samples were collected up to 10 hr after APAP dosing. The hospitalized dogs were administered APAP as a suppository, and blood collected at 2 and 6 hr after dosing. Plasma samples were analyzed by ultra‐performance liquid chromatography with triple quadrupole mass spectrometry. In healthy dogs, oral APAP maximal concentration (CMAX=2.69 μg/ml) was reached quickly (TMAX=1.04 hr) and eliminated rapidly (T1/2 = 1.81 hr). Suppository APAP was rapidly, but variably absorbed (CMAX=0.52 μg/ml TMAX=0.67 hr) and eliminated (T1/2 = 3.21 hr). The relative (to oral) fraction of the suppository dose absorbed was 30% (range <1%–67%). In hospitalized ill dogs, the suppository APAP mean plasma concentration at 2 hr and 6 hr was 1.317 μg/ml and 0.283 μg/ml. Nonlinear mixed‐effects modeling did not identify significant covariates affecting variability and was similar to noncompartmental results. Results supported that oral and suppository acetaminophen in healthy and clinical dogs did not reach or sustain concentrations associated with efficacy. Further studies performed on different doses are needed. [ABSTRACT FROM AUTHOR]

Science of drug delivery has achieved tremendous milestones in the last few decades. Emergence of novel drug delivery techniques and the most popular nanotechnology directed the drug delivery to another level. Without any doubt, present technology holds the proficiency to approach even the intercellular targets. Between all these success auras, there lies wads of giant challenges. One such challenge is delivering the molecule directly to the blood stream. Parenteral route is considered as the most effective route for delivering active pharmaceutical substances, but is associated with major disadvantages of painful drug delivery. Modern drug delivery suggests several approaches to outstrip this painful phenomenon. In the present article, we represent a new systematic vision to understand the ability and desirability of mucosal sites to achieve painless drug delivery. Human mucosa presents supreme proximity to the blood circulation that one can even observe with naked eye. Advances in drug delivery provide numerous approaches to exploit the mucosa for systemic reach. However, the revolutionary success is still unapproachable, with an understandable reason of associated complexities and challenges. This manuscript summarizes the significance of each mucosal site, on the basis of anatomical-physiological grounds. Particular attention is given to rationalize the selection of disease and a suitable drug delivery approach for its treatment. [ABSTRACT FROM AUTHOR]

In-situ gelation is a process of gel formation at the site of application, in which a drug product formulation that exists as a liquid has been transformed into a gel upon contact with body fluids. As a drug delivery agent, the in-situ gel has an advantage of providing sustained release of the drug agent. In-situ gelling liquid suppositories using poloxamer 188 (26-30% W/W) as a suppository base with 10% W/W naproxen were prepared, the gelation temperature of these preparations were measured and they were all above the physiological temperature. Additives such as polyvinylpyrrolidin "PVP" ,hydroxylpropylmethylcellulose "HPMC", sodium alginate and sodium chloride were used in concentration ranging from (0.25-1%W/W) to modulate the gelation temperature and gel strength .The best preparation was obtained through using a combination of poloxamer 188, sodium alginate, naproxen and distilled water (29,0.5,10and 60.5 % W/W respectively)with gelation temperature of 33.6ºC±0.2 and gel strength of 28±2 seconds. The release of drug from this preparation was sustained for about 12 hours and it was faster than conventional solid suppository (Proxen® 500) and oral tablets (Naproxen®500) using dialysis tubing method. Key words: - naproxen, in-situ gelation, liquid suppository, poloxamer188

Rectal drug delivery is an effective alternative to oral and parenteral treatments. This route allows for both local and systemic drug therapy. Traditional rectal dosage formulations have historically been used for localised treatments, including laxatives, hemorrhoid therapy and antipyretics. However, this form of drug dosage often feels alien and uncomfortable to a patient, encouraging refusal. The limitations of conventional solid suppositories can be overcome by creating a thermosensitive liquid suppository. Unfortunately, there are currently only a few studies describing their use in therapy. However, recent trends indicate an increase in the development of this modern therapeutic system. This review introduces a novel rectal drug delivery system with the goal of summarising recent developments in thermosensitive liquid suppositories for analgesic, anticancer, antiemetic, antihypertensive, psychiatric, antiallergic, anaesthetic, antimalarial drugs and insulin. The report also presents the impact of various types of components and their concentration on the properties of this rectal dosage form. Further research into such formulations is certainly needed in order to meet the high demand for modern, efficient rectal gelling systems. Continued research and development in this field would undoubtedly further reveal the hidden potential of rectal drug delivery systems.