Search

Well-studied cycloparaphenylenes (CPPs) correspond to the simplest segments of armchair CNTs, whereas the corresponding macrocyclic oligophenylene strip of zigzag CNTs is still missing. Herein, we present two series of conjugated macrocycles (CM2PP and CN2PP) containing two

There is resurgent interest in atomically precise nanographene radical ions composed of fused hexagons. Two monoradical anions can readily form a doubly negatively charged π-dimer, but to our knowledge, no triply negatively charged π-dimer species have been isolated till now. Herein we report the largest open-shell grapheneic bilayer and also the first example of triply negatively charged radical π-dimer. Upon three-electron reduction, bilayer nanographene fragment molecule (C96H24Ar6)2 (Ar = 2,6-dimethylphenyl) (12) was transformed to a triply negatively charged species 123•-, which has been characterized by single-crystal X-ray diffraction, EPR spectroscopy and SQUID measurements. 123•- features a 96-center-3-electron (96c/3e) pancake bond with a doublet ground state, which can be thermally excited to a quartet state. It is the largest open-shell nanographene bilayer species till now constructed with 34 π-fused rings with 96 conjugated sp2 carbon atoms. Spin frustration is observed with the frustration parameter f = |θcw|/TN31.8 at low temperatures in 123•-, which indicates graphene upon reduction doping may behave as quantum spin liquids.

As a promising hydrogen-storage material, graphene is expected to have a theoretical capacity of 7.7 wt%, which means a carbon-hydrogen atomic ratio of 1:1. However, it hasn’t been demonstrated yet by experiment, and the aim of the U.S. Department of Energy is to achieve 5.5 wt% in 2025. We designed a spatially-confined electrochemical system and found the storage capacity of hydrogen adatoms on single layer graphene (SLG) is as high as 7.3 wt%, which indicates a carbon-hydrogen atomic ratio of 1:1 by considering the sp3 defects of SLG. First, SLG was deposited on a large-area polycrystalline platinum (Pt) foil by chemical vapor deposition (CVD); then, a micropipette with reference electrode, counter electrode and electrolyte solution inside was impacted on the SLG/Pt foil (the working electrode) to construct spatially-confined electrochemical system. The SLG-uncovered Pt atoms act as the catalytic sites to convert protons (H+) to hydrogen adatoms (Had), which then spill over and are chemically adsorbed on SLG through surface diffusion during the cathodic scan. Because the electrode processes are reversible, the Had amount can be measured by the anodic stripping charge. This is the first experimental evidence for the theoretically expected hydrogen-storage capacity on graphene at ambient environment, especially by using H+ rather than hydrogen gas (H2) as hydrogen source, which is of significance for the practical utilization of hydrogen energy.

The intermolecular interaction determines the photophysical properties of the organic aggregates, which are critical to the performance of organic photovoltaics. Here, excitonic coupling, an important intermolecular interaction in organic aggregates, between the π-stacking graphene quantum dots is studied by using transient absorption spectroscopy. We find that the spectral evolution of the ground state bleach arises from the dynamic variation of the excitonic coupling in the excited π-stacks. According to the spectral simulations, we demonstrate that the kinetics of the vibronic peak can be exploited as a probe to measure the dynamics of excitonic coupling in the excited π-stacks.

As a fundamental chemical property, aromaticity guides the synthesis of novel structures and materials. Replacing the carbon moieties of aromatic hydrocarbons with transition metal fragments is a promising strategy to synthesize intriguing organometallic counterparts with a similar aromaticity to their organic parents. However, since antiaromaticity will endow compound instability, it is a great challenge to obtain an antiaromatic organometallic counterpart based on such transition metal replacement in aromatic hydrocarbons. Here, we report an efficient aromaticity transformation on aromatic naphthalene through the bridgehead replacement of an osmium fragment, leading to the unprecedented synthesis of metal-bridgehead naphthalene featuring a highly twisted structure as confirmed by X-ray crystallography characterization. Such a twisted conformation works together with its phosphonium substituents to release the antiaromaticity in the planar conformation of the metal-bridgehead naphthalene. Our findings prove the bridgehead involvement of transition metals in unexpected aromaticity modifications and open an avenue for novel metal-bridgehead complexes.

The rational design of non-Pt oxygen reduction reaction (ORR) catalysts and catalyst layers in fuel cells is largely impeded by insufficient knowledge of triple-phase boundaries (TPBs) in the micropore and mesopore ranges. Here, we developed a size-sensitive molecular probe method to resolve the TPB of Fe/N/C catalyst layers in these size ranges. More than 70% of the ORR activity was found to be contributed by the 0.8- to 2.0-nanometer micropores of Fe/N/C catalysts, even at a low micropore area fraction of 29%. Acid-alkaline interactions at the catalyst-polyelectrolyte interface deactivate the active sites in mesopores and macropores, resulting in inactive TPBs, leaving micropores without the interaction as the active TPBs. The concept of active and inactive TPBs provides a previously unidentified design principle for non-Pt catalyst and catalyst layers in fuel cells.

Nanographenes are inclined to assemble into stacked columnar structures that are stabilized by π-π interactions, whereas other supramolecular structures of nanographenes, such as prisms and cages, are rarely investigated. Herein, a diazananographene was synthesized, and then assembled with a coordination unit, thereby producing a triangular metallaprism. After adding C

The bottom-up approach through on-surface synthesis of porous graphene nanoribbons (GNRs) presents a controllable manner for implanting periodic nanostructures to tune the electronic properties of GNRs in addition to bandgap engineering by width and edge configurations. However, owing to the existing steric hindrance in small pores like divacancies, it is still difficult to embed periodic divacancies with a nonplanar configuration into GNRs. Here, we demonstrate the on-surface synthesis of atomically precise eight-carbon-wide armchair GNRs embedded with periodic divacancies (DV8-aGNRs) by utilizing the monatomic step edges on the Au(111) surface. From a single molecular precursor correspondingly following a

Carbon nanohoop, a class of constrained molecular architecture consisting of linked arene units, has attracted considerable interest from both experimental and theoretical chemists due to its synthetic challenge and aesthetic architectures. Another fascinating and synthetically challenging species, the Mobius-type molecule, has been attracting the scientific community with its elegant structure and aromaticity. Thus, combining two things together, synthesizing a carbon nanohoop with Mobius topology remains more challenging to date. Here we report a cyclophenylene featuring Mobius strip characterized by X-ray crystallography. Theoretical calculations reveal that such type of nanohoop is fully conjugated systems with electrons delocalized both in π sextets and the bridging carbon-carbon bonds. This work highlights that the manipulation of phenylene connection in a carbon nanohoop can help obtain more delicate and aesthetic molecular architectures.

Here, we report a facile method to synthesize a series of macrocycles with different conformations. The planar macrocycle dimer (1), twisted macrocycle trimer (2) and "figure-eight" tetramer (3) are clearly elucidated by X-ray single-crystal analysis, in which the electron-rich phenanthrene units offer the possibility of supramolecular assembly. As expected, in the solid state, 1 and 3 assemble into a columnar stack and an interlocking dimer, respectively, via π-π interactions between the phenanthrene units. Compared to the rigid conformation of dimer 1, the structure of tetramer 3 is more flexible due to its enlarged ring size. 3 can deform from a figure-eight into a boat-shaped geometry to host a planar electron-deficient guest using its electron-rich phenanthrene units. When assembled with spherical electron-deficient C60 , interestingly, 3 further undergoes a conformational transformation from a figure-eight to a belt shape in order to host C60 . These supramolecular assembly behaviors of 3 demonstrate that it is an adaptable macrocyclic host for both planar molecules and fullerenes.

Single-molecule transistors (SMTs) based on fullerenes and their derivatives have been recognized as a long-sought platform for studying the single-electron transport properties. H2O@C60 is a combination of fullerene and H2O, a typical light molecule. Here we use the ‘molecular surgery’ technique to synthesize the H2O@C60 molecule and then construct the H2O@C60 SMTs, together with the C60 SMTs. Evidences for single-electron transport have been obtained in our measurements, including explicit Coulomb blockade and Coulomb oscillations. We then calculate the detailed parameters of the H2O@C60 and C60 SMTs using a capacitance model derived from the Coulomb diamond feature, which gives a capacitance ratio of 1:5.05:8.52 for the H2O@C60 SMT and 1:29.5:74.8 for the C60 SMT. Moreover, the gate efficiency factor α turns out to be 0.0686 in the H2O@C60 SMT, about ten times larger than that in the C60 SMT. We propose that the enhanced gate efficiency in H2O@C60 SMT may be induced by the closer attachment of molecular orbital electron clouds to the gate substrate due to polarization effects of H2O.

Polycyclic aromatic hydrocarbons (PAHs) generally refer to aromatic compounds containing two or more fused benzene rings. PAHs have excellent optical, electronic and self-assembly properties, and have important applications in organic light-emitting diodes (OLED), organic field effect transistors (OFET), organic solar photovoltaic cells (OPVC) and other fields. The introduction of heteroatoms to PAHs can adjust the electronic structure, dipole moment, and the self-assembly behavior. Among them, sulfur-doped PAHs have been widely studied. Due to the proper energy level and bonding mode of sulfur atom, the sulfur-doped PAHs have stronger dipole-dipole interactions, electron donating ability, and weakened aromaticity. Sulfur-doped PAHs usually exhibit unique redox characteristics and better hole transporting, so they are widely used as p-type organic semiconductor and electronic donor in photoelectric conversion, and donation unit in donor-acceptor conjugated molecules. Doping PAHs with sulfur is mainly through two ways: post-modification and fusing the sulfur-containing heterocyclic unit. On the other hand, regarding the regulation of geometric structure of carbon skeleton, non-hexagonal ring is introduced to transform the molecular structure from planar to curved structure. The structural distortion can be achieved by the peripherial stereo-hindrance. For example, the PAHs containing helicene units have a highly distorted structure, thus showing a unique optical, electric and assembly properties. In order to construct novel PAHs, this article combines heteroatom doping and geometric control of carbon skeleton. A twisted tri-sulfur-doped PAH C36S3H10(C9H11)6 (molecule 1 ) was synthesized by oxidative cyclodehydrogenation of an oligophenylene precursor, which contains three thiophene rings. X-ray single crystal diffraction exactly characterized the structure of molecule 1 . Because the ring is not completely fused, molecule 1 contains two [5]helicene units, which leads to a twisted molecular structure. In crystalline state, molecule 1 forms dimers through C−H···π and weak π-π interactions, which further packs into one-dimensional columnar stacking through the weak interactions of C−H···π and C−H···S. Different from the planar PAHs, the twisted molecule 1 is not easy to aggregate in solution. Molecule 1 exhibits a yellow photoluminescence, but its quantum yield is low. Combined with the study of transient fluorescence spectroscopy, it is speculated that its twisted molecular structure may be the reason for its low quantum yield. The synthesis of molecule 1 enriches the family of sulfur-doped PAHs, and the derivatives with alkyl chains of molecule 1 can be synthesized in the future and be used as organic semiconductors or electron donors in solar cells and organic electronic devices, etc.

Although heptagons are widely found in graphenic materials, the precise synthesis of nanocarbons containing heptagons remains a challenge, especially for the nanocarbons containing multiple-heptagons. Herein, we show that photo-induced radical cyclization (PIRC) can be used to synthesize multi-heptagon-embedded nanocarbons. Notably, a nanographene containing six heptagons (1) was obtained via a six-fold cascade PIRC reaction. The structure of 1 was clearly validated and showed a Monkey-saddle-shaped conformation. Experimental bond analysis and theoretical calculations indicated that the heptagons in 1 were non-aromatic, whereas the peripheral rings were highly aromatic. Compared to planar nanographene with the same number of π electrons, 1 had a similar optical gap due to a compromise between the decreased conjugation in the wrapped structure and enhanced electronic delocalization at the rim. Electrochemical studies showed that 1 had low-lying oxidation potentials, which was attributed to the nitrogen-doping.

Electrets are dielectric materials that have a quasi-permanent dipole polarization. A single-molecule electret is a long-sought-after nanoscale component because it can lead to miniaturized non-volatile memory storage devices. The signature of a single-molecule electret is the switching between two electric dipole states by an external electric field. The existence of these electrets has remained controversial because of the poor electric dipole stability in single molecules. Here we report the observation of a gate-controlled switching between two electronic states in Gd@C82. The encapsulated Gd atom forms a charged centre that sets up two single-electron transport channels. A gate voltage of ±11 V (corresponding to a coercive field of ~50 mV A–1) switches the system between the two transport channels with a ferroelectricity-like hysteresis loop. Using density functional theory, we assign the two states to two different permanent electrical dipole orientations generated from the Gd atom being trapped at two different sites inside the C82 cage. The two dipole states are separated by a transition energy barrier of 11 meV. The conductance switching is then attributed to the electric-field-driven reorientation of the individual dipole, as the coercive field provides the necessary energy to overcome the transition barrier. A Gd@C82 molecule shows electric polarization switching behaviour under a gate bias voltage, thus demonstrating a single-molecule electret device.

The radial conjugated π-system of cycloparaphenylenes (CPPs) makes them intriguing fluorophores and unique supramolecular hosts. However, the bright photoluminescence (PL) of CPPs was limited to the blue light and the supramolecular assembly behavior of large CPPs was rarely investigated. Here we present the synthesis of tetra-benzothiadiazole-based [12]cycloparaphenylene (TB[12]CPP), which exhibits a lime to orange PL with an excellent quantum yield up to 82 % in solution. The PL quantum yield of TB[12]CPP can be further improved to 98 % in polymer matrix. Benefiting from its enlarged size, TB[12]CPP can accommodate a fullerene derivative or concave-convex complexes of fullerene and buckybowl through the combined π-π and C-H⋅⋅⋅π interactions. The latter demonstrates the first case of a ternary supramolecule of CPPs.

The metal-carbon triple bonds and carbon-carbon triple bonds are both highly unsaturated bonds. As a result, their reactions tend to afford cycloaddition intermediates or products. Herein, we report a reaction of M≡C and C≡C bonds that affords acyclic addition products. These newly discovered reactions are highly efficient, regio- and stereospecific, with good functional group tolerance, and are robust under air at room temperature. The isotope labeling NMR experiments and theoretical calculations reveal the reaction mechanism. Employing these reactions, functionalized dπ-pπ conjugated systems can be easily constructed and modified. The resulting dπ-pπ conjugated systems were found to be good electron transport layer materials in organic solar cells, with power conversion efficiency up to 16.28% based on the PM6: Y6 non-fullerene system. This work provides a facile, efficient methodology for the preparation of dπ-pπ conjugated systems for use in functional materials.

Generally, the conjugated homo-macrocycles (CHMs) are synthesized by covalently linking the repeating subunits. However, large subunits are often difficult to conjugate together due to severe stereo-hindrance. Meanwhile, large polyaromatic blocks can not only incorporate its appealing electronic and optical properties into CHMs but also distort the CHMs from planar to three-dimensional (3D) molecular structure. Here we synthesized the 3D CHM composed of large polyaromatic units by post-π-extension. Specifically, cyclo-m-phenylenes, as the cyclic precursor, were π-extended by C-C coupling and then subjected to dehydrocyclization, affording cyclo-1,3-dibenzo[e,1]pyrenylenes (CMDP). The structures of CMDPs were unambiguously characterized by single crystal X-ray diffraction, showing a congested and strained 3D conformation, which was also confirmed by theoretical calculations. Compared with the monomer, CMDPs showed redshifted absorption and emission, as well as a tenfold enhancement in photoluminescence quantum yield, which could be attributed to their 3D conformation.

All-inorganic and earth-abundant bi-/trimetallic hydr(oxy)oxides are widely used as oxygen evolution electrocatalysts owing to their remarkable performance. However, their atomically precise struct ...

Although water-soluble graphene quantum dots (GQDs) have shown various promising bio-applications due to their intriguing optical and chemical properties, the large heterogeneity in compositions, sizes, and shapes of these GQDs hampers the better understanding of their structure-properties correlation and further uses in terms of large-scale manufacturing practices and safety concerns. It is shown here that a water-soluble atomically-precise GQD (WAGQD-C

Bowl inversion is a unique property of buckybowls. The polarity and assembly configuration of buckybowls are reversed after bowl inversion. So far, this unique phenomenon has been studied in solution and on surface, but not in solid state due to spatial constraint. Now a series of exo-type supramolecular assemblies of trithiasumanene and nanographene are investigated. Tuning the electron density of the nanogaphene component was found to directly affect the binding constant of the complex. Reversible bowl inversion in the solid state was then successfully achieved by subjecting the trithiasumanene-nanographene assembly with the weakest binding strength to repeated heating-cooling cycles, which was unambiguously observed by single crystal X-ray diffraction.

Carbon-rich two-dimensional (2D) materials show significant potential in energy storage and conversion applications. A conjugated 2D covalent organic polymer (COP) with embedded triphenylene (TP) units was synthesized by Glaser–Hay cross-coupling and validated by Raman, IR, XPS and NMR spectroscopy. TP-COP exhibited a uniform pore size of 5.4 A and laminar structure with an interlayer spacing of 3.8 A, which could be mechanically exfoliated to yield few-layered nanosheets. Interfacial polymerization produced the continuous TP-COP films from quasi-monolayer to multilayer. As the anode materials of lithium batteries, TP-COP delivered large reversible capacity up to 1624 mA h g−1, high charge rate, and good recycling ability. These properties are likely due to the presence of lithium ions in both the interspace of the expanded sp2 moieties and the in-plane nanopores of TP-COP.

Background Takeda G protein–coupled receptor 5 (TGR5) is recognized as a promising target for type 2 diabetes and metabolic syndrome; its expression has been demonstrated in the brain and is thought to be neuroprotective. Here, we hypothesize that dysfunction of central TGR5 may contribute to the pathogenesis of depression. Methods In well-established chronic social defeat stress (CSDS) and chronic restraint stress (CRS) models of depression, we investigated the functional roles of TGR5 in CA3 pyramidal neurons (PyNs) and underlying mechanisms of the neuronal circuit in depression (for in vivo studies, n = 10; for in vitro studies, n = 5–10) using fiber photometry; optogenetic, chemogenetic, pharmacological, and molecular profiling techniques; and behavioral tests. Results Both CSDS and CRS most significantly reduced TGR5 expression of hippocampal CA3 PyNs. Genetic overexpression of TGR5 in CA3 PyNs or intra-CA3 infusion of INT-777, a specific agonist, protected against CSDS and CRS, exerting significant antidepressant-like effects that were mediated via CA3 PyN activation. Conversely, genetic knockout or TGR5 knockdown in CA3 facilitated stress-induced depression-like behaviors. Re-expression of TGR5 in CA3 PyNs rather than infusion of INT-777 significantly improved depression-like behaviors in Tgr5 knockout mice exposed to CSDS or CRS. Silencing and stimulation of CA3 PyNs→somatostatin–GABAergic (gamma-aminobutyric acidergic) neurons of the dorsolateral septum circuit bidirectionally regulated depression-like behaviors, and blockade of this circuit abrogated the antidepressant-like effects from TGR5 activation of CA3 PyNs. Conclusions These findings indicate that TGR5 can regulate depression via CA3 PyNs→somatostatin–GABAergic neurons of dorsolateral septum transmission, suggesting that TGR5 could be a novel target for developing antidepressants.

Quintulene, a non-graphitic cycloarene with fivefold symmetry, has remained synthetically elusive due to its high molecular strain originating from its curved structure. Here we report the construction of extended quintulene, which was unambiguously characterized by mass and NMR spectroscopy. The extended quintulene represents a naturally curved nanocarbon based on its conical molecular geometry. It undergoes dimerization in solution via π−π stacking to form a metastable, but isolable bilayer complex. Thermodynamic and kinetic characterization reveals the dimerization process as entropy-driven and following second-order kinetics with a high activation energy. These findings provide a deeper understanding of the assembly of conical nanocarbons. Comparison of optical properties of monomer and dimer points toward a H-type interlayer coupling in the dimer., Quintulene, a quintuple non-graphitic cycloarene, is challenging to synthesize. Here, the authors synthesize and characterize the cone-shaped extended quintulene and its bilayer dimer, and disclose its dimerization as an entropy-driven, second-order reaction with a substantial activation energy.

Molecular cutout of defect-containing bilayer graphene was achieved by bottom-up synthesis and showed defect-enhanced luminesce., The electronic structure of bilayer graphene can be altered by creating defects in its carbon skeleton. However, the natural defects are generally heterogeneous. On the other hand, rational bottom-up synthesis offers the possibility of building well-defined molecular cutout of defect-containing bilayer graphene, which allows defect-induced modulation with atomic precision. Here, we report the construction of a molecular defect-containing bilayer graphene (MDBG) with an inner cavity by organic synthesis. Single-crystal x-ray diffraction, mass spectrometry, and nuclear magnetic resonance spectroscopy unambiguously characterize the structure of MDBG. Compared with its same-sized, defect-free counterpart, the MDBG exhibits a notable blue shift of optical absorption and emission, as well as a 9.6-fold brightening of its photoluminescence, which demonstrates that a single defect can markedly alter the optical properties of bilayer graphene.

Tumor microenvironment-induced ultrasmall nanodrug generation (TMIUSNG) is an unprecedented approach to overcome the drug penetration barriers across complex biological systems, poor circulation stability and limited drug loading efficiency (DLE). Herein, a novel strategy was designed to synthesize metal-organic nanodrug complexes (MONCs) through supramolecular coassembly of photosensitizer sinoporphyrin sodium, chemotherapeutic drug doxorubicin and ferric ions. Compared with the free photosensitizer, MONCs produced 3-fold more reactive oxygen species (ROS) through the energy transfer-mediated fluorescence quenching. Remarkably, the self-delivering supramolecular MONCs with high DLE acted as a potent ultrasmall-nanodrug generator in response to the mild acidic tumor microenvironment to release ultrasmall nanodrugs (5-10 nm in diameter) from larger parental nanoparticles (140 nm in diameter), which in turn enhanced the intratumor permeability and therapeutic efficacy. The key mechanism of MONC synthesis was proposed, and we, for the first time, validated the generation of supramolecular scaffold intermediates between MONCs' assembly/disassembly states, as well as their involvement in multidrug ligands interactions. This proof-of-concept TMIUSNG strategy provides a foundation for the rational design of analogous carrier-free nanotheranostics through the combination of multiple therapeutic agents and metal ions with imaging functions.

Electrets are dielectric materials that have a quasi-permanent dipole polarization. A single-molecule electret is a long-sought-after nanoscale component because it can lead to miniaturized non-volatile memory storage devices. The signature of a single-molecule electret is the switching between two electric dipole states by an external electric field. The existence of these electrets has remained controversial because of the poor electric dipole stability in single molecules. Here we report the observation of a gate-controlled switching between two electronic states in Gd@C

Arc-discharge of graphite is the most prevalent technique for synthesis of novel fullerenes, but the extreme conditions of the carbon arc prevent any currently available instrument from detecting the reaction species inside. To detour the difficulties for probing the derivatization mechanism in the drastic arc-discharge conditions, C78Cl6(C5Cl6) with prototypical C2v(2)-C78 cage has been isolated and characterized in the products of the chlorine-involving carbon arc. The structure of C2v(2)-C78Cl6(C5Cl6), featuring with fullerene C2v(2)-C78 doubly functionalized by chlorine atoms and perchlorinated cyclopentadiene, has been identified by X-ray crystallography. Confirmed by standard Density Functional Theory (DFT) calculations and Car-Parrinello simulations as well as mass spectrometry, the fullerene core has been revealed to form firstly followed then by reaction with chlorine atoms and afterwards with perchlorinated cyclopentadiene, with implication about stepwise reaction temperatures and sequences for the formation of fullerenes and their derivatives in the otherwise inaccessible extreme conditions of the carbon arc.

Fully phenylated C60Ph6 has never been synthesized in the past two decades largely due to steric effect and poor thermodynamic stability of the initial intermediate towards its isostructural penta-phenyl adduct (C60Ph5X) that has one central site intact. Herein, we report a kinetic management strategy using nitrobenzene that can efficiently alleviate the steric effect in the substitution reaction of C60Cl6 to synthesize C60Ph6. As revealed by X-ray crystallography, the molecule of C60Ph6, in stark contrast to its isostructural C60Ph5Cl with the last chlorine intact, shows a favorable geometrical structure and molecular stacking for electron transport. Furthermore, C60Ph6 shows high LUMO energy of −3.51 eV (0.4 eV higher than that of [6,6]-phenyl-C61-butyric acid methyl ester, PCBM), which is promising high open-circuit voltage for organic solar cells. The merits of both molecular packing and electrochemical property of C60Ph6 lead to high open-circuit voltage of 1.04 V for the OSC device based on poly(3-hexylthiophene) (P3HT). The present C60Ph6 exemplifies a novel class of electronic acceptors with fully aromatized groups on a fullerene cage.

Interface engineering is a critical method by which to efficiently enhance the photovoltaic performance of nonfullerene solar cells (NFSC). Herein, a series of metal-nanographene-containing large transition metal involving dπ -pπ conjugated systems by way of the addition reactions of osmapentalynes and p-diethynyl-hexabenzocoronenes is reported. Conjugated extensions are engineered to optimize the π-conjugation of these metal-nanographene molecules, which serve as alcohol-soluble cathode interlayer (CIL) materials. Upon extension of the π-conjugation, the power conversion efficiency (PCE) of PM6:BTP-eC9-based NFSCs increases from 16% to over 18%, giving the highest recorded PCE. It is deduced by X-ray crystallographic analysis, interfacial contact methods, morphology characterization, and carrier dynamics that modification of hexabenzocoronenes-styryl can effectively improve the short-circuit current density (Jsc ) and fill factor of organic solar cells (OSCs), mainly due to the strong and ordered charge transfer, more matching energy level alignments, better interfacial contacts between the active layer and the electrodes, and regulated morphology. Consequently, the carrier transport is largely facilitated, and the carrier recombination is simultaneously impeded. These new CIL materials are broadly able to enhance the photovoltaic properties of OSCs in other systems, which provides a promising potential to serve as CILs for higher-quality OSCs.

By artificial mimic of the natural [FeFe]-hydrogenases, a series of polyoxometalate-based high-nuclear Ni clusters containing a varying number of {Ni 4 O 4 } cubane cores, K 1.5 Na 26.5 [{Ni 4 (OH) 3 (PO 4 )} 4 ( A- PW 9 O 34 ) 4 ]·62H 2 O ( 1 ), Na 28 [{Ni 4 (OH) 3 (PO 4 )} 4 ( A- PW 9 O 34 ) 2 ( B- PW 9 O 34 ) 2 ]·102H 2 O ( 2 ), and Na 28 [{Ni 4 (OH) 3 (VO 4 )} 4 ( B- PW 9 O 34 ) 4 ]·74H 2 O ( 3 ), were synthesized and systematically characterized. Compounds 1 − 3 contain {Ni 16 (XO 4 ) 4 (OH) 12 } (X = P, V) core encapsulated by the trivacant A- / B- {PW 9 O 34 } ligands. Compounds 1 − 3 as homogeneous catalysts for visible-light-driven H 2 evolution indicate that they not only show high photocatalytic performance (High TON of 578.8, 679.1, and 931.1 for 1 − 3 were achieved, respectively), but also their catalytic performance was improved with the increasing number of {Ni 4 O 4 } cubanes. Multiple stability experiments confirm that compounds 1 − 3 maintain their structure intact under the photocatalytic conditions. The above research provides a platform for mimicking the structures of natural hydrogenases to further explore more efficient and inexpensive H 2 evolution catalysts.