Search

BACKGROUND Many countries have set goals to replace conventional energy sources with renewable energy sources. This has led to investigations into the use of lignocellulosic biomass as a feedstock for renewable fuels and base chemicals. Unfortunately hydrolysation of this biomass introduces impurities that are toxic to the fermentation bacteria. This study aims to find the key adsorber properties for the separation of toxic 5-hydroxymethylfurfural ( HMF) from glucose. RESULTS Batch adsorption experiments on styrene based (anion exchange) adsorbers showed that a high surface area is a key property for effective HMF adsorption. Introduction of polar groups in the form of anion exchange groups appears to increase the HMF-affinity of the resin material, unfortunately these groups also introduce affinity for glucose. Competitive adsorption studies of HMF and glucose showed that glucose does not affect HMF adsorption in any of the resins. CONCLUSION Furan derivatives can be removed from water and sugar solutions with styrene based (anion exchange) polymeric resins. For efficient removal, a high surface area of the resin is a key property. Dowex Optipore L-493 shows the best specific HMF adsorption and no specificity for glucose, which makes it an excellent adsorber for HMF removal from hydrolysate for the fermentation of glucose. © 2013 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

BACKGROUND: Recently much research has been focused on the production and refinery of biobased fuels. The production of biofuels derived from lignocellulosic biomass is recognized as a promising route to produce biobased fuels responsibly. Often, product streams (e.g. glucose) still contain small amounts of undesired components (e.g. furans such as HMF). This study focuses on the removal of furans produced during the fermentation. In earlier work, styrene based resins have been identified as promising materials for this separation. In this work the kinetic properties of the most promising resin: Dowex™ Optipore™ L493 are studied. RESULTS: The diffusion coefficient of 5 mg L-1 HMF was ~8 × 10-12 m² s-1 in water and 3.0 × 10-12 m² s-1 in a glucose solution. The reduced diffusion coefficient in the particle when glucose is present is caused by the higher viscosity of the glucose solution and it indicates that diffusion is controlled by surface and pore diffusion. The breakthrough curves of HMF on Optipore showed that the column is very efficient under conditions of interest. CONCLUSION: This study shows that Optipore is a much more efficient resin for HMF removal than currently used resins. Its fast kinetics and capacity make it possible to efficiently remove HMF from glucose solutions. [ABSTRACT FROM AUTHOR]