Search

Aim . The paper intends to frame and pilot the optimised science-based principles of the assay transfer. Materials and methods . The research was performed on desloratadine film-coated tablets, using an analytical balance Mettler Toledo XP 205DR and Class A volumetric glassware. Absorbance readings were measured on a UV-Vis spectrophotometer Lambda 25. Results and discussion . The concept of method transfer that complements the conventional approach to validation with the lifecycle initiative and the metrological base of the State Pharmacopoeia of Ukraine was substantiated, following which the transfer of the spectrophotometric procedure for desloratadine assay was conducted. For the batch intended for the transfer, the budget of analytical and technological variability was balanced. The deviation of a single assay result from the grand mean was used as the criterion for accuracy in the transfer. The requirement for the one-sided confidence interval for assay result runs not to exceed the target uncertainty of the procedure was used as the criterion for precision. The control strategy requirements for variability sources and the analytical target profile requirements for precision and accuracy were met in the receiving unit. Conclusion . The paper discusses the premise and advocates an alternative approach to the method transfer. Precision is proposed not to study during the transfer (in the short-term experiment) but assess from the stability data (in the long-term experiment). Compliance with the normal analytical practice (the maximum permissible variability attributed to analysts and analytical instruments) allows narrowing down the transfer design to the confirmation in the minimal experiment that the amplitude of variability sources lies within the predefined range

Aim. This work aimed to validate an assay procedure for desloratadine tablets by direct spectrophotometric method. Materials and methods. A pilot-scale batch of the pharmaceutical preparationAlerdez, film-coated tablets containing 5 mg of desloratadine, manufactured by PJSC SIC “Borshchahivskiy CPP”, Ukraine, was used as an object of the study. A UV-Vis spectrophotometer Lambda 25 (Perkin Elmer), analytical balance Mettler Toledo XP 205DR, and class A volumetric apparatus were used in the study. Validation of the procedure was performed following the metrological approach of the State Pharmacopoeia of Ukraine (SPhU), whose requirements for the target uncertainty and bias, which rest on the risk assessment of making incorrect decisions on compliance (a confidence level of 95 %), were translated into criteria for all validation characteristics recommended by ICH. All calculations were made in normalised coordinates. The linearity, accuracy and precision (repeatability) were studied in a single experiment using nine different concentrations that uniformly covered the range of ±30 % from the nominal concentration of desloratadine. For validation of the procedure, an SPhU reference standard of desloratadine was used. Results. The experiment design and validation characteristics being tested were in full compliance with ICH Q2(R1) recommendations. All performance characteristics conformed to the criteria recommended by the SPhU. Requirements for the target uncertainty (1.6 %) and bias for any systematic source of variation (≤0.51 %, negligible in relation to 1.6 %) were established. The analytical procedure was specific – the absorbance from the placebo solution was insignificant (A %=0.36). The procedure met the requirements for linearity, accuracy, and precision at the repeatability level. The residual standard deviations0was 0.34 (≤ 0.84); correlation indexRcwas 0.9998 (≥0.9991); interceptаwas 0.045 (less than its confidence interval ∆a=1.14). The confidence interval for recovery∆Z, which was used as a precision estimate, was 0.55 % (less than the target uncertainty). The mean recovery, which was used as an accuracy estimate, statistically insignificantly deviated from 100% (|Zmean‑100| = 0.022 %). The confidence interval for the intermediate precision∆intrawas 0.33 % (less than the target uncertainty). The developed analytical procedure was found to be robust. Conclusions. A spectrophotometric procedure suitable for the assay of desloratadine in film-coated tabletsAlerdezwith content limits of ±5 % was validated by the SPhU approach.

Aim. The paper intends to frame and pilot the optimised science-based principles of the assay transfer. Materials and methods. The research was performed on desloratadine film-coated tablets, using an analytical balance Mettler Toledo XP 205DR and Class A volumetric glassware. Absorbance readings were measured on a UV-Vis spectrophotometer Lambda 25. Results and discussion. The concept of method transfer that complements the conventional approach to validation with the lifecycle initiative and the metrological base of the State Pharmacopoeia of Ukraine was substantiated, following which the transfer of the spectrophotometric procedure for desloratadine assay was conducted. For the batch intended for the transfer, the budget of analytical and technological variability was balanced. The deviation of a single assay result from the grand mean was used as the criterion for accuracy in the transfer. The requirement for the one-sided confidence interval for assay result runs not to exceed the target uncertainty of the procedure was used as the criterion for precision. The control strategy requirements for variability sources and the analytical target profile requirements for precision and accuracy were met in the receiving unit. Conclusion. The paper discusses the premise and advocates an alternative approach to the method transfer. Precision is proposed not to study during the transfer (in the short-term experiment) but assess from the stability data (in the long-term experiment). Compliance with the normal analytical practice (the maximum permissible variability attributed to analysts and analytical instruments) allows narrowing down the transfer design to the confirmation in the minimal experiment that the amplitude of variability sources lies within the predefined range